The repeated music is not written out but enclosed between repeat bar
lines. If the repeat is at the beginning of a piece, a repeat bar
line is only printed at the end. Alternative endings (volte) are
-printed, left to right with brackets. This is the standard notation
+printed left to right with brackets. This is the standard notation
for repeats with alternatives.
@item unfold
entering repetitious music.
@item percent
-These are beat or measure repeats. They look like percent signs.
+These are beat or measure repeats. They look like single slashes or
+percent signs.
@item tremolo
This is used to write tremolo beams.
\repeat volta @var{repeatcount} @var{musicexpr}
@end example
-where @var{musicexpr} is a music expression. Alternate endings can
-be produced using @code{\alternative}.
+where @var{musicexpr} is a music expression. Alternate endings can be
+produced using @code{\alternative}. If there are more repeats than
+there are alternate endings, the earliest repeats are given the first
+alternative.
Normal repeats without alternate endings:
{ cis2 g' }
{ cis,2 b }
}
+\repeat volta 3 { c4 d e f }
+ \alternative {
+ { d2 e }
+ { f2 g }
+ }
c1
@end lilypond
-Repeats with upbeats:
+Repeats with upbeats can be entered in two ways:
@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
\new Staff {
@snippets
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{shortening-volta-brackets.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{adding-volta-brackets-to-additional-staves.ly}
@c Is there a way to have a final bar ("|.") at the end of the
@c previous line? Doesn't seem to be.
+@c It could be done by overriding
+@c the BreakAlignment property. Want a separate example?
If you want to start a repeat at the beginning of a line and have a
double bar at the end of the previous line, use @code{\bar}. For more
information, see @ref{Bar lines}.
Timing information is not remembered at the start of an alternative,
so after a repeat timing information must be reset by hand; for
example, by setting @code{Score.measurePosition} or entering
-@code{\partial}. Similarly, slurs or ties are also not repeated.
+@code{\partial}. Similarly, slurs are also not repeated.
@funindex repeatCommands
-@c FIXME: Markup does not work in the "text" field
-@c And how does one change the font?
-@c On the whole, this section needs better documentation (why the
-@c double parentheses around the volta expressions?)
+@warning{These methods are only used for displaying unusual repeat
+constructs. In most cases, repeats should be created using the
+standard @code{\\repeat} command or by printing the relevant bar
+lines. For more information, see @ref{Bar lines}.}
The property @code{repeatCommands} can be used to control the
layout of repeats. Its value is a Scheme list of repeat commands.
-@table @asis
-@item @code{start-repeat}
+@table @code
+@item start-repeat
Print a @code{|:} bar line.
-@item @code{end-repeat}
-Print a @code{:|} bar line.
+@lilypond[quote,ragged-right,verbatim,fragment,relative=2]
+c1
+\set Score.repeatCommands = #'( start-repeat )
+d4 e f g
+c1
+@end lilypond
+
+As per standard engraving practice, repeat signs are not printed
+at the beginning of a piece.
+
+@item end-repeat
+Print a @code{:|} bar line:
+
+@lilypond[quote,ragged-right,verbatim,fragment,relative=2]
+c1
+d4 e f g
+\set Score.repeatCommands = #'( end-repeat )
+c1
+@end lilypond
+
+@item (volta @var{number})
+Create a new volta with the specified number:
+
+@lilypond[verbatim,quote,relative=2]
+f4 g a b
+\set Score.repeatCommands = #'( ( volta "2" ) )
+g4 a g a
+c1
+@end lilypond
-@item @code{(volta @var{text})}
-Print a volta bracket saying @var{text}. The text can be specified as
-a text string or as a markup text, see @ref{Formatting text}. Do not
-forget to change the font, as the default number font does not contain
-alphabetic characters;
+@item (volta #f)
+Stops a running volta bracket:
+@lilypond[quote,ragged-right,verbatim,fragment,relative=2]
+c1
+\set Score.repeatCommands = #'( ( volta "2" ) )
+f4 g a b
+\set Score.repeatCommands = #'( ( volta #f ) )
+a4 g f e
+c1
+@end lilypond
-@item @code{(volta #f)}
-Stop a running volta bracket.
@end table
+Multiple repeat commands may occur at the same point:
+
+@lilypond[verbatim,quote,relative=2]
+f4 g a b
+\set Score.repeatCommands = #'( ( volta "2, 5" ) end-repeat )
+g4 a g a
+c1
+\set Score.repeatCommands = #'( ( volta #f ) ( volta "95" ) end-repeat )
+b1
+@end lilypond
+
+Text can be included with the volta bracket. The text can be a
+number or numbers or markup text, see @ref{Formatting text}. The
+simplest way to use markup text is to define the markup first,
+then include the the markup in a Scheme list.
+
+@lilypond[verbatim,quote]
+voltaAdLib = \markup { 1. 2. 3... \text \italic { ad lib. } }
+\relative c'' {
+ c1
+ \set Score.repeatCommands = #(list (list 'volta voltaAdLib) 'start-repeat)
+ c4 b d e
+ \set Score.repeatCommands = #'((volta #f) (volta "4.") end-repeat)
+ f1
+ \set Score.repeatCommands = #'((volta #f))
+}
+@end lilypond
+
+
+@snippets
+
+@c FIXME: send these to Neil or Valentin to be added as snippets,
+@c delete them.
+Manual control of the volte, including a @code{|:} bar line at the
+beginning and explicit volta numbers:
+
+@c FIXME: I can't believe this is right.
+@c TODO: I think it is. I plan
+@c to delete this example, since it's
+@c already been given at L238. rp
+@lilypond[verbatim,quote,relative=2]
+s1*1/10
+\set Score.repeatCommands = #'( start-repeat )
+c1*9/10
+d4 e f g
+\set Score.repeatCommands = #'( ( volta "1, 2, 5" ) )
+f4 g a b
+\set Score.repeatCommands = #'( ( volta #f ) ( volta "95" ) end-repeat )
+g4 a g a
+\set Score.repeatCommands = #'( ( volta #f ) )
+c1
+@end lilypond
+
+In order to print a @code{|:} bar line at the beginning of a piece,
+the @code{BreakAlignment} property must be overridden:
+
@lilypond[quote,ragged-right,verbatim,fragment,relative=2]
-c4
-\set Score.repeatCommands = #'((volta "93") end-repeat)
-c4 b
-\set Score.repeatCommands = #'((volta #f))
-d4 e
+\once \override Score.BreakAlignment #'break-align-orders =
+#(make-vector 3 '(
+instrument-name
+left-edge
+ambitus
+span-bar
+breathing-sign
+clef
+key-signature
+time-signature
+staff-bar
+custos
+span-bar
+))
+\bar "|:"
+c1
+d1
+d4 e f g
@end lilypond
-@c FIXME: improve visibility of bar lines link?
@seealso
-Notation Reference: @ref{Bar lines}, @ref{Formatting text}.
+Notation Reference:
+@ref{Bar lines},
+@ref{Formatting text}.
-Snippets: @rlsr{Repeats}.
+Snippets:
+@rlsr{Repeats}.
-Internals Reference: @rinternals{VoltaBracket},
-@rinternals{RepeatedMusic}, @rinternals{VoltaRepeatedMusic}.
+Internals Reference:
+@rinternals{VoltaBracket},
+@rinternals{RepeatedMusic},
+@rinternals{VoltaRepeatedMusic}.
@node Written-out repeats
@end example
where @var{musicexpr} is a music expression. Unfold repeats can be
-made with or without alternate endings. Unfold repeats without
-alternate endings:
+made with or without alternate endings. If there are more repeats
+than there are alternate endings, the first alternative ending is
+applied to the earliest endings. Unfold repeats without alternate
+endings:
@lilypond[quote,ragged-right,verbatim,fragment,relative=2]
c1
{ cis,2 b }
}
c1
+\repeat unfold 3 { d4 c b2 }
+ \alternative {
+ { c4 d e f }
+ { d4 c b a }
+ }
+c1
@end lilypond
@seealso
@seealso
+Music Glossary: @rglos{percent repeat}, @rglos{simile}.
+
Snippets: @rlsr{Repeats}.
Internals Reference: @rinternals{RepeatSlash},
@seealso
-Notation Reference: @ref{Tremolo repeats}.
-
-Internals Reference: @rinternals{Beam}, @rinternals{StemTremolo}.
-
Snippets: @rlsr{Repeats}.
-Elsewhere: @rinternals{StemTremolo}.
-
-