@c Note: -*-texinfo-*-
-@c
+@c This file is part of lilypond.tely
+
@c A menu is needed before every deeper *section nesting of @node's; run
@c M-x texinfo-all-menus-update
-@c to automagically fill in these menus before saving changes
+@c to automatically fill in these menus before saving changes
@c
@c FIXME: singular vs. plural: Beams/Beam
* Orchestral music::
* Ancient notation::
* Contemporary notation::
-* Tuning output::
-* Global layout::
-* Sound::
+* Special notation::
@end menu
@c FIXME: Note entry vs Music entry at top level menu is confusing.
* Stems::
* Ties::
* Tuplets::
-* Easy Notation note heads::
@end menu
@cindex quarter tones
@cindex semi-flats, semi-sharps
-@lilypond[verbatim,relative 2]
+@lilypond[verbatim,relative=2]
ceses4
ceseh
ces
(`@code{,}') characters. Each @code{'} raises the pitch by one
octave; each @code{,} lowers the pitch by an octave:
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
c' c'' es' g' as' gisis' ais'
@end lilypond
after the pitch. A cautionary accidental
@cindex cautionary accidental
@cindex parenthesized accidental
-(an accidental within parentheses) can be obtained by adding the
+(i.e. an accidental within parentheses) can be obtained by adding the
question mark `@code{?}' after the pitch:
@lilypond[fragment,verbatim]
Rests are entered like notes, with the note name @code{r}:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
r1 r2 r4 r8
@end lilypond
formatting in polyphonic music easier. Rest collision testing will
leave these rests alone:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
a'4\rest d'4\rest
@end lilypond
An invisible rest (also called a `skip') can be entered like a note
with note name `@code{s}' or with @code{\skip @var{duration}}:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
a2 s4 a4 \skip 1 a4
@end lilypond
-The @code{s} syntax is only available in Note mode and Chord mode. In
+The @code{s} syntax is only available in note mode and chord mode. In
other situations, you should use the @code{\skip} command:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
\score {
\new Staff <<
{ \time 4/8 \skip 2 \time 4/4 }
The skip command is merely an empty musical placeholder. It does not
produce any output, not even transparent output.
+The @code{s} skip command does create @internalsref{Staff} and
+@internalsref{Voice} when necessary, similar to note and rest
+commands. For example, the following results in an empty staff.
+
+@lilypond[raggedright,verbatim]
+\score { \notes { s4 } }
+@end lilypond
+
+The same fragment using @code{\skip} results in an empty page.
+
@seealso
-Internals: @internalsref{SkipEvent}.
+Internals: @internalsref{SkipEvent}, @internalsref{SkipMusic}.
a half note is entered using a @code{2} (since it is a 1/2 note). For notes
longer than a whole you must use variables:
-@c FIXME: what is an identifier? I do not think it's been introduced yet.
-@c and if it has, I obviously skipped that part. - Graham
-
@example
c'\breve
c'1 c'2 c'4 c'8 c'16 c'32 c'64 c'64
\translator {
\StaffContext
\remove "Clef_engraver"
- \remove "Staff_symbol_engraver"
- \remove "Time_signature_engraver"
+ \override StaffSymbol #'transparent = ##t
+ \override TimeSignature #'transparent = ##t
\consists "Pitch_squash_engraver"
}
}
lengths:
@cindex @code{.}
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
a' b' c''8 b' a'4 a'4. b'4.. c'8.
@end lilypond
@cindex @code{r}
will not affect the appearance of the notes or rests produced.
In the following example, the first three notes take up exactly two
beats:
-@lilypond[fragment,relative 2,verbatim]
+@lilypond[fragment,relative=2,verbatim]
\time 2/4
a4*2/3 gis4*2/3 a4*2/3
a4
Internals: @internalsref{Dots}, and @internalsref{DotColumn}.
-@refbugs
-
-In dense chords, dots can overlap.
-
@node Stems
@subsection Stems
slurs, which indicate articulation, or phrasing slurs, which indicate
musical phrasing. A tie is entered using the tilde symbol `@code{~}':
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
e' ~ e' <c' e' g'> ~ <c' e' g'>
@end lilypond
to the augmentation dot; in the following example there are two ways of
notating exactly the same concept:
@c
-@lilypond[fragment, singleline,quote]
+@lilypond[fragment,raggedright]
\time 3/4 c'2. c'2 ~ c'4
@end lilypond
If you need to tie a lot of notes over bars, it may be easier to use automatic
-note splitting (See @ref{Automatic note splitting}).
+note splitting (see @ref{Automatic note splitting}).
@refcommands
In this manual: @ref{Automatic note splitting}.
-Internals: @internalsref{TieEvent}, @internalsref{NewTieEvent},
-@internalsref{Tie}
-
-Examples: if you want less ties created for a chord, see
-@inputfileref{input/test,tie-sparse.ly}.
+Internals: @internalsref{TieEvent}, @internalsref{Tie}.
For tying only a subset of the note heads of a pair of chords, see
@inputfileref{input/regression,tie-chord-partial.ly}.
notes have the length of 2, so the notes are 2/3 of their written
length:
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
g'4 \times 2/3 {c'4 c' c'} d'4 d'4
@end lilypond
example, there are two triplets shown, while @code{\times} was only
used once:
-@lilypond[fragment, relative, singleline, verbatim]
-\property Voice.tupletSpannerDuration = #(ly:make-moment 1 4)
+@lilypond[fragment,relative,raggedright,verbatim]
+\set tupletSpannerDuration = #(ly:make-moment 1 4)
\times 2/3 { c'8 c c c c c }
@end lilypond
Internals: @internalsref{TupletBracket}, and @internalsref{TimeScaledMusic}.
+Examples: @inputfileref{input/regression,tuplet-nest.ly}.
+
@refbugs
Nested tuplets are not formatted automatically. In this case, outer
-tuplet brackets should be moved manually.
-
-@node Easy Notation note heads
-@subsection Easy Notation note heads
-
-@cindex easy notation
-@cindex Hal Leonard
-
-The `easy play' note head includes a note name inside the head. It is
-used in music aimed at beginners:
-
-@lilypond[singleline,verbatim,26pt]
-\score {
- \notes { c'2 e'4 f' | g'1 }
- \paper { \translator { \EasyNotation } }
-}
-@end lilypond
-
-The @code{EasyNotation} variable overrides a @internalsref{Score} context.
-You probably will want to print it with magnification or a
-large font size to make it more readable. To print with
-magnification, you must create a DVI file (with @file{lilypond}) and
-then enlarge it with something like @file{dvips -x 2000 file.dvi}.
-See the @code{dvips} documentation for more details. To print with a
-larger font, see @ref{Font Size}.
-
-
-@cindex Xdvi
-@cindex ghostscript
+tuplet brackets should be moved manually, which is demonstrated in
+@inputfileref{input/regression,tuplet-nest.ly}.
-If you view the result with Xdvi, then staff lines will show through
-the letters. Printing the PostScript file obtained does produce the
-correct result.
@node Easier music entry
predecessor of the first note of @var{musicexpr}.
Here is the relative mode shown in action:
-@lilypond[fragment,singleline,verbatim,center]
+@lilypond[fragment,raggedright,verbatim]
\relative c'' {
b c d c b c bes a
}
@end lilypond
Octave changing marks are used for intervals greater than a fourth:
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
\relative c'' {
c g c f, c' a, e'' }
@end lilypond
If the preceding item is a chord, the first note of the chord is used
to determine the first note of the next chord:
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
\relative c' {
c <c e g>
<c' e g>
@subsection Octave check
-Octave checks make octave errors easier to correct.
-The syntax is
+Octave checks make octave errors easier to correct: a note may be
+followed by @code{=}@var{quotes} which indicates what its absolute
+octave should be. In the following example,
+@example
+ \relative c'' @{ c='' b=' d,='' @}
+@end example
+
+@noindent
+@c take care with @code, adds confusing quotes.
+the d will generate a warning, because a d'' is expected, but a d' is
+found. In the output, the octave is corrected this and the following
+notes.
+
+
+
+There is also a syntax that is separate from the notes.
@example
\octave @var{pitch}
@end example
The octave of a note following an octave check is determined with
respect to the note preceding it. In the next fragment, the last note
-is a @code{a'}, above central C. Hence, the @code{\octave} check may
+is a @code{a'}, above middle C. Hence, the @code{\octave} check may
be deleted without changing the meaning of the piece.
@lilypond[verbatim,fragment]
This can be used to skip over the parts of a score that have already
been checked for errors:
-@lilypond[fragment,singleline,verbatim]
+@lilypond[fragment,raggedright,verbatim]
\relative c'' { c8 d
-\property Score.skipTypesetting = ##t
+\set Score.skipTypesetting = ##t
e f g a g c, f e d
-\property Score.skipTypesetting = ##f
+\set Score.skipTypesetting = ##f
c d b bes a g c2 }
@end lilypond
Long notes can be converted automatically to tied notes. This is done
by replacing the @internalsref{Note_heads_engraver} by the
-@internalsref{Completion_heads_engraver}:
-
-@example
- \paper @{ \translator @{
- \ThreadContext
- \remove "Note_heads_engraver"
- \consists "Completion_heads_engraver"
- @} @}
-@end example
+@internalsref{Completion_heads_engraver}.
+In the following examples, notes crossing the bar line are split and tied.
-which will make long notes tied in the following example:
-@example
- \time 2/4
- c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2
-@end example
-@lilypond[noindent]
-\score{
- \notes\relative c'{
- \time 2/4
- c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2
- }
- \paper { \translator {
- \ThreadContext
+@lilypond[noindent,verbatim,relative=1]
+\new Voice \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
- } }
- }
+} {
+ c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2
+}
@end lilypond
This engraver splits all running notes at the bar line, and inserts
Not all durations (especially those containing tuplets) can be
represented exactly; the engraver will not insert tuplets.
+@seealso
+
+Examples: @inputfileref{input/regression,completion-heads.ly}.
+Internals: @internalsref{Completion_heads_engraver}.
@node Staff notation
@subsection Staff symbol
@cindex adjusting staff symbol
-@cindex StaffSymbol, using \property
Notes, dynamic signs, etc. are grouped
with a set of horizontal lines, into a staff (plural `staves'). In our
@seealso
-Internals: @internalsref{StaffSymbol},
+Internals: @internalsref{StaffSymbol}.
Examples: @inputfileref{input/test,staff-lines.ly},
-@inputfileref{input/test,staff-size.ly}
+@inputfileref{input/test,staff-size.ly}.
@refbugs
If a staff is ended halfway a piece, the staff symbol may not end
-exactly on the barline.
+exactly on the bar line.
@node Key signature
can be specified by setting this property directly.
Accidentals and key signatures often confuse new users, because
-unaltered notes get natural signs depending on the keysignature. The
+unaltered notes get natural signs depending on the key signature. The
tutorial explains why this is so in @ref{More about pitches}.
@refbugs
a b }
@end lilypond
-Internally the @code{set-octavation} function sets the properties
-@code{ottavation} (eg. to @code{"8va"}) and
-@code{centralCPosition}. The function also takes arguments -1 (for 8va
-bassa) and 2 (for 15ma).
+The @code{set-octavation} function also takes -1 (for 8va bassa) and 2
+(for 15ma) as arguments. Internally the function sets the properties
+@code{ottavation} (e.g. to @code{"8va"}) and
+@code{centralCPosition}. For overriding the text of the bracket, set
+@code{ottavation} after invoking @code{set-octavation}, i.e.,
+
+@example
+ #(set-octavation 1)
+ \set Staff.ottavation = #"8"
+@end example
+
+@seealso
+
+Internals: @internalsref{OttavaBracket}.
-@internalsref{OttavaSpanner}.
+Examples: @inputfileref{input/regression,ottava.ly},
+@inputfileref{input/regression,ottava-broken.ly}.
@refbugs
Partial measures, for example in upsteps, are entered using the
@code{\partial} command:
-@lilypond[fragment,verbatim,relative 1]
+@lilypond[fragment,verbatim,relative=1]
\partial 16*5 c16 cis d dis e | a2. c,4 | b2
@end lilypond
@end example
This is internally translated into
@example
- \property Timing.measurePosition = -@var{length of duration}
+ \set Timing.measurePosition = -@var{length of duration}
@end example
@cindex @code{|}
The property @code{measurePosition} contains a rational number
Bar lines delimit measures, but are also used to indicate repeats.
Normally, they are inserted automatically. Line breaks may only
-happen on barlines.
+happen on bar lines.
@syntax
Special types
-of barlines can be forced with the @code{\bar} command:
+of bar lines can be forced with the @code{\bar} command:
@c
@lilypond[relative=1,fragment,verbatim]
c4 \bar "|:" c4
@end lilypond
The following bar types are available:
-@lilypond[fragment, relative, singleline, verbatim]
+@lilypond[fragment,relative,raggedright,verbatim]
c4
\bar "|" c
\bar "" c
\bar ":|" c
\bar ".|" c
\bar ".|." c
-\bar "|."
+\bar ":|:" c
+\bar "|." c
+\bar ":" c
@end lilypond
-For allowing linebreaks, there is a special command,
+For allowing line breaks, there is a special command,
@example
\bar "empty"
@end example
-This will insert an invisible barline, and allow linebreaks at this
+This will insert an invisible bar line, and allow line breaks at this
point.
In scores with many staves, a @code{\bar} command in one staff is
automatically applied to all staves. The resulting bar lines are
connected between different staves of a @internalsref{StaffGroup}:
@c
-@lilypond[fragment, verbatim]
+@lilypond[fragment,verbatim]
<< \context StaffGroup <<
\new Staff { e'4 d'
\bar "||"
The command @code{\bar @var{bartype}} is a short cut for doing
-@code{\property Score.whichBar = @var{bartype}} Whenever
+@code{\set Score.whichBar = @var{bartype}} Whenever
@code{whichBar} is set to a string, a bar line of that type is
created. At the start of a measure it is set to
@code{defaultBarType}. The contents of @code{repeatCommands} are used
to override default measure bars.
-Property @code{whichBar} can also be set directly, using @code{\property}
+Property @code{whichBar} can also be set directly, using @code{\set}
or @code{\bar}. These settings take precedence over the automatic
@code{whichBar} settings.
In this manual: @ref{Repeats}.
-The bar line objects that are created at @internalsref{Staff} level
-are called @internalsref{BarLine}, the bar lines that span staves are
-@internalsref{SpanBar}s.
+Internals: the bar line objects that are created at
+@internalsref{Staff} level are called @internalsref{BarLine}, the bar
+lines that span staves are @internalsref{SpanBar}s.
@cindex bar lines at start of system
@cindex start of system
-The barlines at the start of each system are
+The bar lines at the start of each system are
@internalsref{SystemStartBar}, @internalsref{SystemStartBrace}, and
@internalsref{SystemStartBracket}. Only one of these types is created
in every context, and that type is determined by the property
@code{systemStartDelimiter}.
+Examples: @inputfileref{input/test,bar-lines.ly},
+
@node Polyphony
@section Polyphony
@cindex polyphony
each of these contexts, vertical direction of slurs, stems, etc. is set
appropriately.
+@cindex @code{\voiceOne}
+@cindex @code{\voiceFour}
+
This can also be done by instantiating @internalsref{Voice} contexts
by hand, and using @code{\voiceOne}, up to @code{\voiceFour} to assign
a stem directions and horizontal shift for each part:
@c
-@lilypond[singleline, verbatim]
+@lilypond[raggedright,verbatim]
\relative c''
\context Staff << \new Voice { \voiceOne cis2 b }
\new Voice { \voiceThree b4 ais ~ ais4 gis4 }
\new Voice { \voiceTwo fis4~ fis4 f ~ f } >>
@end lilypond
+@noindent
+The command @code{\oneVoice} will revert back to the normal setting.
+@cindex @code{\oneVoice}
+
+
Normally, note heads with a different number of dots are not merged, but
when the object property @code{merge-differently-dotted} is set in
the @internalsref{NoteCollision} object, they are merged:
-@lilypond[verbatim,fragment,singleline]
+@lilypond[verbatim,fragment,raggedright]
\relative c'' \context Voice << {
g8 g8
- \property Staff.NoteCollision \override
+ \override Staff.NoteCollision
#'merge-differently-dotted = ##t
g8 g8
} \\ { g8.[ f16] g8.[ f16] }
Similarly, you can merge half note heads with eighth notes, by setting
@code{merge-differently-headed}:
-@lilypond[fragment, relative=2,verbatim]
+@lilypond[fragment,relative=2,verbatim]
\context Voice << {
c8 c4.
- \property Staff.NoteCollision
- \override #'merge-differently-headed = ##t
+ \override Staff.NoteCollision
+ #'merge-differently-headed = ##t
c8 c4. } \\ { c2 c2 } >>
@end lilypond
LilyPond also vertically shifts rests that are opposite of a stem:
-@lilypond[singleline,fragment,verbatim]
+@lilypond[raggedright,fragment,verbatim]
\context Voice << c''4 \\ r4 >>
@end lilypond
@cindex @code{\voiceFour}
@code{\voiceFour}.
+
The following commands specify in what chords of the current voice
should be shifted: the outer voice has @code{\shiftOff}, and the inner
voices have @code{\shiftOn}, @code{\shiftOnn}, etc.
When using @code{merge-differently-headed} with an upstem 8th or a shorter
note, and a downstem half note, the 8th note gets the wrong offset.
+There is no support for clusters where the same note occurs with
+different accidentals in the same chord. In this case, it is
+recommended to use enharmonic transcription, or to use special cluster
+notation (see @ref{Clusters}).
+
@node Beaming
@section Beaming
Beams are used to group short notes into chunks that are aligned with
the metrum. They are inserted automatically in most cases:
-@lilypond[fragment,verbatim, relative=2]
+@lilypond[fragment,verbatim,relative=2]
\time 2/4 c8 c c c \time 6/8 c c c c8. c16 c8
@end lilypond
entered explicitly. It is also possible to define beaming patterns
that differ from the defaults.
+Individual notes may be marked with @code{\noBeam}, to prevent them
+from being beamed:
+
+@lilypond[fragment,verbatim,relative=2]
+ \time 2/4 c8 c\noBeam c c
+@end lilypond
+
+
@seealso
Internals: @internalsref{Beam}.
@cindex Automatic beams
+@menu
+* Manual beams::
+* Setting automatic beam behavior::
+@end menu
+
+@node Manual beams
@subsection Manual beams
@cindex beams, manual
@cindex @code{]}
@cindex @code{[}
In some cases it may be necessary to override the automatic beaming
-algorithm. For example, the auto beamer will not put beams over rests
+algorithm. For example, the autobeamer will not put beams over rests
or bar lines. Such beams are specified by manually: the begin and end
point are marked with @code{[} and @code{]}:
Normally, beaming patterns within a beam are determined automatically.
When this mechanism fouls up, the properties
-@code{Voice.stemLeftBeamCount} and @code{Voice.stemRightBeamCount} can
+@code{stemLeftBeamCount} and @code{stemRightBeamCount} can
be used to control the beam subdivision on a stem. If either property
-is set, its value will be used only once, and then it is erased.
+is set, its value will be used only once, and then it is erased:
@lilypond[fragment,relative,verbatim]
\context Staff {
f8[ r16 f g a]
- f8[ r16 \property Voice.stemLeftBeamCount = #1 f g a]
+ f8[ r16 \set stemLeftBeamCount = #1 f g a]
}
@end lilypond
@cindex @code{stemRightBeamCount}
The property @code{subdivideBeams} can be set in order to subdivide
all 16th or shorter beams at beat positions, as defined by the
-@code{beatLength} property . This accomplishes the same effect as
+@code{beatLength} property. This accomplishes the same effect as
twiddling with @code{stemLeftBeamCount} and @code{stemRightBeamCount},
but it take less typing:
@lilypond[relative=1,verbatim,noindent]
c16[ c c c c c c c]
- \property Voice.subdivideBeams = ##t
+ \set subdivideBeams = ##t
c16[ c c c c c c c]
- \property Score.beatLength = #(ly:make-moment 1 8)
+ \set Score.beatLength = #(ly:make-moment 1 8)
c16[ c c c c c c c]
@end lilypond
@cindex subdivideBeams
-@menu
-* Setting automatic beam behavior::
-@end menu
-
-@ignore
-@no de Beam typography
-@sub section Beam typography
-
-One of the strong points of LilyPond is how beams are formatted. Beams
-are quantized, meaning that the left and right endpoints beams start
-exactly on staff lines. Without quantization, small wedges of white
-space appear between the beam and staff line, and this looks untidy.
-
-Beams are also slope-damped: melodies that go up or down should also
-have beams that go up or down, but the slope of the beams should be
-less than the slope of the notes themselves.
-
-Some beams should be horizontal. These are so-called concave beams.
-
-[TODO: some pictures.]
-@end ignore
-
@node Setting automatic beam behavior
@subsection Setting automatic beam behavior
In normal time signatures, automatic beams can start on any note but can
only end in a few positions within the measure: beams can end on a beat,
or at durations specified by the properties in
-@code{Voice.autoBeamSettings}. The defaults for @code{autoBeamSettings}
+@code{autoBeamSettings}. The defaults for @code{autoBeamSettings}
are defined in @file{scm/auto-beam.scm}.
-The value of @code{autoBeamSettings} is changed using
-@code{\override} and restored with @code{\revert}:
+The value of @code{autoBeamSettings} is changed with two functions:
@example
-\property Voice.autoBeamSettings \override #'(@var{BE} @var{P} @var{Q} @var{N} @var{M}) = @var{dur}
-\property Voice.autoBeamSettings \revert #'(@var{BE} @var{P} @var{Q} @var{N} @var{M})
+ #(override-auto-beam-setting
+ '(@var{be} @var{p} @var{q} @var{n} @var{m}) @var{a} @var{b}
+ [@var{context}])
+ #(revert-auto-beam-setting '(@var{be} @var{p} @var{q} @var{n} @var{m}))
@end example
-Here, @var{BE} is the symbol @code{begin} or @code{end}. It determines
+Here, @var{be} is the symbol @code{begin} or @code{end}. It determines
whether the rule applies to begin or end-points. The quantity
-@var{P}/@var{Q} refers to the length of the beamed notes (and `@code{*
-*}' designates notes of any length), @var{N}/@var{M} refers to a time
-signature (wildcards, `@code{* *}' may be entered to designate all time
-signatures).
+@var{p}/@var{q} refers to the length of the beamed notes (and `@code{*
+*}' designates notes of any length), @var{n}/@var{M} refers to a time
+signature (wildcards `@code{* *}' may be entered to designate all time
+signatures), @var{a}/@var{b} is a duration. By default, this command
+changes settings for the current voice. It is also possible to adjust
+settings at higher contexts, by adding a @var{context} argument.
For example, if automatic beams should end on every quarter note, use
the following:
@example
-\property Voice.autoBeamSettings \override
- #'(end * * * *) = #(ly:make-moment 1 4)
+ #(override-auto-beam-setting '(end * * * *) 1 4)
@end example
Since the duration of a quarter note is 1/4 of a whole note, it is
entered as @code{(ly:make-moment 1 4)}.
The same syntax can be used to specify beam starting points. In this
example, automatic beams can only end on a dotted quarter note:
@example
-\property Voice.autoBeamSettings \override
- #'(end * * * *) = #(ly:make-moment 3 8)
+ #(override-auto-beam-setting '(end * * * *) 3 8)
@end example
In 4/4 time signature, this means that automatic beams could end only on
3/8 and on the fourth beat of the measure (after 3/4, that is 2 times
-3/8 has passed within the measure).
+3/8, has passed within the measure).
Rules can also be restricted to specific time signatures. A rule that
should only be applied in @var{N}/@var{M} time signature is formed by
replacing the second asterisks by @var{N} and @var{M}. For example, a
rule for 6/8 time exclusively looks like
@example
-\property Voice.autoBeamSettings \override
- #'(begin * * 6 8) = ...
+ #(override-auto-beam-setting '(begin * * 6 8) @dots{})
@end example
If a rule should be to applied only to certain types of beams, use the
@cindex automatic beam generation
@cindex autobeam
-@cindex @code{Voice.autoBeaming}
+@cindex @code{autoBeaming}
@cindex lyrics
For melodies that have lyrics, you may want to switch off
-automatic beaming. This is done by setting @code{Voice.autoBeaming} to
+automatic beaming. This is done by setting @code{autoBeaming} to
@code{#f}.
@refcommands
end at 3 eights; the third beam can only be corrected by specifying
manual beaming.
-@lilypond[singleline,fragment,relative,noverbatim,quote]
- \property Voice.autoBeamSettings
- \override #'(end * * * *) = #(ly:make-moment 3 8)
+@lilypond[raggedright,fragment,relative,noverbatim]
+ #(override-auto-beam-setting '(end * * * *) 3 8)
% rather show case where it goes wrong
%\time 12/8 c'8 c c c16 c c c c c c[ c c c] c8[ c] c4
\time 12/8 c'8 c c c16 c c c c c c c c c c8 c c4
@node Using the predefined accidental variables
@subsection Using the predefined accidental variables
-The constructs for describing the accidental typesetting rules are
-quite hairy, so non-experts should stick to the variables
-defined in @file{ly/property-init.ly}.
-@cindex @file{property-init.ly}
-
-The variables set properties in the ``@code{Current}'' context (see
-@ref{Context properties}). This means that the variables should
-normally be added right after the creation of the context in which the
-accidental typesetting described by the variable is to take
-effect. For example, if you want to use piano-accidentals in a piano
-staff then issue @code{\pianoAccidentals} first thing after the
-creation of the piano staff:
+
+Common rules for typesetting macros have been canned in a
+function. This function is called as follows:
+
+@cindex @code{set-accidental-style}
@example
-\score @{
- \notes \relative c'' <<
- \new Staff @{ cis4 d e2 @}
- \context GrandStaff <<
- \pianoAccidentals
- \new Staff @{ cis4 d e2 @}
- \new Staff @{ es2 c @}
- >>
- \new Staff @{ es2 c @}
- >>
-@}
+ #(set-accidental-style 'modern 'Voice)
@end example
-@lilypond[singleline]
-\score {
- \notes \relative c'' <<
- \new Staff { cis4 d e2 }
- \context GrandStaff <<
- \pianoAccidentals
- \new Staff { cis4 d e2 }
- \new Staff { es2 c }
- >>
- \new Staff { es2 c }
- >>
- \paper {
- \translator {
- \StaffContext
- minimumVerticalExtent = #'(-4.0 . 4.0)
- }
- }
-}
-@end lilypond
-The variables are:
+The function takes two arguments: a symbol that denotes the style (in
+the example, @code{modern}), and another symbol that denotes the
+context name (in this example, @code{Staff}). If no context name is
+supplied, @code{Staff} is the default.
+
+The following styles are supported:
@table @code
-@item \defaultAccidentals
- @cindex @code{\defaultAccidentals}
- This is the default typesetting behaviour. It should correspond
+@item default
+ This is the default typesetting behavior. It should correspond
to 18th century common practice: Accidentals are
remembered to the end of the measure in which they occur and
only on their own octave.
-@item \voiceAccidentals
- @cindex @code{\voiceAccidentals}
+@item voice
@c
- The normal behaviour is to
-remember the accidentals on Staff-level. This variable, however,
-typesets accidentals individually for each voice. Apart from that the
-rule is similar to @code{\defaultAccidentals}.
+ The normal behavior is to remember the accidentals on
+Staff-level. This variable, however, typesets accidentals
+individually for each voice. Apart from that, the rule is similar to
+@code{code}.
This leads to some weird and often unwanted results
- because accidentals from one voice do not get cancelled in other
+ because accidentals from one voice do not get canceled in other
voices:
-@lilypond[singleline,relative,fragment,verbatim,quote]
+@lilypond[raggedright,relative,fragment,verbatim]
\context Staff <<
- \voiceAccidentals
+ #(set-accidental-style 'voice)
<<
{ es g } \\
{ c, e }
>> >>
@end lilypond
- Hence you should only use @code{\voiceAccidentals} if the voices
+ Hence you should only use @code{voice} if the voices
are to be read solely by individual musicians. If the staff is to be
used by one musician (e.g. a conductor) then you use
-@code{\modernVoiceAccidentals} or @code{\modernVoiceCautionaries}
+@code{modern} or @code{modern-cautionary}
instead.
-@item \modernAccidentals
- @cindex @code{\modernAccidentals}
+@item modern
+@cindex @code{modern} style accidentals
This rule corresponds to the common practice in the 20th
century.
- The rule is more complex than @code{\defaultAccidentals}.
- You get all the same accidentals, but temporary
- accidentals also get cancelled in other octaves. Furthermore,
- in the same octave, they also get cancelled in the following measure:
-@lilypond[singleline,fragment,verbatim]
- \modernAccidentals
+ This rule prints the same accidentals as @code{default}, but temporary
+ accidentals also are canceled in other octaves. Furthermore,
+ in the same octave, they also get canceled in the following
+ measure:
+
+@lilypond[raggedright,fragment,verbatim]
+ #(set-accidental-style 'modern)
cis' c'' cis'2 | c'' c'
@end lilypond
-@item \modernCautionaries
- @cindex @code{\modernCautionaries}
- This rule is similar to @code{\modernAccidentals}, but the
+@item @code{modern-cautionary}
+ @cindex @code{modern-cautionary}
+ This rule is similar to @code{modern}, but the
``extra'' accidentals (the ones not typeset by
- @code{\defaultAccidentals}) are typeset as cautionary accidentals.
+ @code{default}) are typeset as cautionary accidentals.
They are printed in reduced size or with parentheses:
-@lilypond[singleline,fragment,verbatim]
- \modernCautionaries
+@lilypond[raggedright,fragment,verbatim]
+ #(set-accidental-style 'modern-cautionary)
cis' c'' cis'2 | c'' c'
@end lilypond
- @cindex @code{\modernVoiceAccidentals}
-@item \modernVoiceAccidentals
+ @cindex @code{modern-voice}
+@item modern-voice
is used for multivoice accidentals to be read both by musicians
playing one voice and musicians playing all voices. Accidentals are
-typeset for each voice, but they @emph{are} cancelled across voices in
+typeset for each voice, but they @emph{are} canceled across voices in
the same @internalsref{Staff}.
- @cindex @code{\modernVoiceCautionaries}
-@item \modernVoiceCautionaries
-is the same as @code{\modernVoiceAccidentals}, but with the extra
-accidentals (the ones not typeset by @code{\voiceAccidentals}) typeset
+ @cindex @code{modern-voice-cautionary}
+@item modern-voice-cautionary
+is the same as @code{modern-voice}, but with the extra
+accidentals (the ones not typeset by @code{voice}) typeset
as cautionaries. Even though all accidentals typeset by
-@code{\defaultAccidentals} @emph{are} typeset by this variable then
+@code{default} @emph{are} typeset by this variable then
some of them are typeset as cautionaries.
-@item \pianoAccidentals
- @cindex @code{\pianoAccidentals}
+@item piano
+ @cindex @code{piano} accidentals
20th century practice for piano notation. Very similar to
- @code{\modernAccidentals} but accidentals also get cancelled
+ @code{modern} but accidentals also get canceled
across the staves in the same @internalsref{GrandStaff} or
@internalsref{PianoStaff}.
-@item \pianoCautionaries
- @cindex @code{\pianoCautionaries}
- As @code{\pianoAccidentals} but with the extra accidentals
+@item piano-cautionary
+ @cindex @code{#(set-accidental-style 'piano-cautionary)}
+ As @code{#(set-accidental-style 'piano)' , str)} but with the extra accidentals
typeset as cautionaries.
-@item \noResetKey
- @cindex @code{\noResetKey}
- Same as @code{\defaultAccidentals} but with accidentals lasting
+@item no-reset
+ @cindex @code{no-reset} accidental style
+ Same as @code{default} but with accidentals lasting
``forever'' and not only until the next measure:
-@lilypond[singleline,fragment,verbatim,relative]
- \noResetKey
+@lilypond[raggedright,fragment,verbatim,relative]
+ #(set-accidental-style 'no-reset)
c1 cis cis c
@end lilypond
-@item \forgetAccidentals
- @cindex @code{\forgetAccidentals}
- This is sort of the opposite of @code{\noResetKey}: Accidentals
+@item forget
+ This is sort of the opposite of @code{no-reset}: Accidentals
are not remembered at all---and hence all accidentals are
typeset relative to the key signature, regardless of what was
before in the music:
-@lilypond[singleline,fragment,verbatim,relative]
- \forgetAccidentals
+
+@lilypond[raggedright,fragment,verbatim,relative]
+ #(set-accidental-style 'forget)
\key d\major c4 c cis cis d d dis dis
@end lilypond
@end table
@node Customized accidental rules
-@subsection Customized accidental rules
+@subsection Customized accidental rules
For determining when to print an accidental, several different rules
are tried. The rule that gives the highest number of accidentals is
@var{context} is @internalsref{Score} then all staves share
accidentals, and if @var{context} is @internalsref{Staff} then all
voices in the same staff share accidentals, but staves do not.
+
@item octavation:
Whether the accidental changes all octaves or only the current
- octave.
-@item lazyness:
- Over how many barlines the accidental lasts.
- If @var{lazyness} is @code{-1} then the accidental is forget
- immediately, and if @var{lazyness} is @code{#t} then the accidental
- lasts forever.
-
-@c [TODO: should use +infinity for this case?]
-
+ octave. Valid choices are
+
+ @table @samp
+ @item same-octave:
+ This is the default algorithm. Accidentals are typeset if the note changes
+ the accidental of that note in that octave. Accidentals lasts to the end of the measure
+ and then as many measures as specified in the value. I.e. 1 means to the end
+ of next measure, -1 means to the end of previous measure (that is: no duration at all), etc. #t means forever.
+ @item any-octave:
+ Accidentals are typeset if the note is different from
+ the previous note on the same pitch in any octave. The value has same meaning as in
+ same-octave.
+ @end table
+
+@item laziness
+
+ Over how many bar lines the accidental lasts.
+ If @var{laziness} is @code{-1} then the accidental is forget
+ immediately, and if @var{laziness} is @code{#t} then the accidental
+ lasts forever.
@end table
-@refcommands
-
-@cindex @code{\defaultAccidentals}
-@code{\defaultAccidentals},
-@cindex @code{\voiceAccidentals}
-@code{\voiceAccidentals},
-@cindex @code{\modernAccidentals}
-@code{\modernAccidentals},
-@cindex @code{\modernCautionaries}
-@code{\modernCautionaries},
-@cindex @code{\modernVoiceAccidentals}
-@code{\modernVoiceAccidentals},
-@cindex @code{\modernVoiceCautionaries}
-@code{\modernVoiceCautionaries},
-@cindex @code{\pianoAccidentals}
-@code{\pianoAccidentals},
-@cindex @code{\pianoCautionaries}
-@code{\pianoCautionaries},
-@cindex @code{\noResetKey}
-@code{\noResetKey},
-@cindex @code{\forgetAccidentals}
-@code{\forgetAccidentals}.
@seealso
accidentals depending on the order in which the notes occur in the
input file:
-@lilypond[singleline,fragment,verbatim]
-\property Staff.autoAccidentals = #'( Staff (any-octave . 0) )
+@lilypond[raggedright,fragment,verbatim]
+\set Staff.autoAccidentals = #'( Staff (any-octave . 0) )
cis'4 <c'' c'> r2 | cis'4 <c' c''> r2
| <cis' c''> r | <c'' cis'> r |
@end lilypond
@syntax
They are entered using parentheses:
-@lilypond[relative 1,fragment,verbatim,center]
+@lilypond[relative=1,fragment,verbatim]
f( g)( a) a8 b( a4 g2 f4)
<c e>2( <b d>2)
@end lilypond
@lilypond[fragment,relative,verbatim]
\slurUp
- \property Voice.Stem \set #'length = #5.5
+ \override Stem #'length = #5.5
g'8(g g4)
- \property Voice.Slur \set #'attachment = #'(stem . stem)
+ \override Slur #'attachment = #'(stem . stem)
g8( g g4)
@end lilypond
@lilypond[fragment,relative,verbatim]
\stemUp \slurUp
d32( d'4 d8..)
- \property Voice.Slur \set #'attachment = #'(stem . stem)
+ \override Slur #'attachment = #'(stem . stem)
d,32( d'4 d8..)
@end lilypond
indicate a musical sentence. It is started using @code{\(} and @code{\)}
respectively:
-@lilypond[fragment,verbatim,center,relative]
+@lilypond[fragment,verbatim,relative]
\time 6/4 c'\( d( e) f( e) d\)
@end lilypond
@cindex @code{\phrasingSlurDown}
@code{\phrasingSlurDown},
@cindex @code{\phrasingSlurBoth}
-@code{\phrasingSlurBoth},
+@code{\phrasingSlurBoth}.
@seealso
any markup text. For example,
@lilypond[fragment,verbatim,relative]
c'4
-\property Voice.BreathingSign \override #'text
+\override BreathingSign #'text
= #(make-musicglyph-markup "scripts-rvarcomma")
\breathe
d4
@seealso
Internals: @internalsref{BreathingSign},
-@internalsref{BreathingSignEvent}
+@internalsref{BreathingSignEvent}.
Examples: @inputfileref{input/regression,breathing-sign.ly}.
Metronome settings can be entered as follows:
@example
- \tempo @var{duration} = @var{perminute}
+ \tempo @var{duration} = @var{per-minute}
@end example
In the MIDI output, they are interpreted as a tempo change, and in the
@lilypond[fragment,relative,verbatim]
\relative c' { c1
- \property Voice.TextSpanner \set #'direction = #-1
- \property Voice.TextSpanner \set #'edge-text = #'("rall " . "")
+ \override TextSpanner #'direction = #-1
+ \override TextSpanner #'edge-text = #'("rall " . "")
c2\startTextSpan b c\stopTextSpan a }
@end lilypond
@internalsref{Staff} context. A bracket is started with
@code{\startGroup} and closed with @code{\stopGroup}:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
\score { \notes \relative c'' {
c4\startGroup\startGroup
c4\stopGroup
@seealso
Internals: @internalsref{HorizontalBracket},
-@internalsref{NoteGroupingEvent}
+@internalsref{NoteGroupingEvent}.
Examples: @inputfileref{input/regression,note-group-bracket.ly}.
by adding a dash and the character signifying the
articulation. They are demonstrated here:
-@lilypondfile[notexidoc]{script-abbreviations.ly}
+@lilypondfile[]{script-abbreviations.ly}
The meanings of these shorthands can be changed: see
@file{ly/script-init.ly} for examples.
The script is automatically placed, but if you need to force
directions, you can use @code{_} to force them down, or @code{^} to
put them up:
-@lilypond[fragment, verbatim]
+@lilypond[fragment,verbatim]
c''4^^ c''4_^
@end lilypond
Other symbols can be added using the syntax
@var{note}@code{\}@var{name}, e.g. @code{c4\fermata}. Again, they
can be forced up or down using @code{^} and @code{_},
-eg.
+e.g.
-@lilypond[verbatim,fragment,relative 2]
+@lilypond[verbatim,fragment,relative=2]
c\fermata c^\fermata c_\fermata
@end lilypond
@cindex coda
@cindex varcoda
-@lilypondfile[notexidoc]{script-chart.ly}
+@lilypondfile[]{script-chart.ly}
@refcommands
@refbugs
- These note ornaments appear in the printed output but have no
+These note ornaments appear in the printed output but have no
effect on the MIDI rendering of the music.
@end example
For finger changes, use markup texts:
@c
-@lilypond[verbatim, singleline, fragment]
+@lilypond[verbatim,raggedright,fragment]
c'4-1 c'4-2 c'4-3 c'4-4
c'^\markup { \fontsize #-3 \number "2-3" }
@end lilypond
@cindex subscript
You can use the thumb-script to indicate that a note should be
-played with your thumb (used in cello music):
+played with the thumb (e.g. in cello music):
-@lilypond[verbatim, singleline, fragment]
+@lilypond[verbatim,raggedright,fragment]
<a' a''-3>8(_\thumb <b' b''-3>)_\thumb
<c'' c'''-3>(_\thumb <d'' d'''-3>)_\thumb
@end lilypond
Fingerings for chords can also be added to individual notes
of the chord by adding them after the pitches:
-@lilypond[verbatim,singleline,fragment,relative=1]
+@lilypond[verbatim,raggedright,fragment,relative=1]
< c-1 e-2 g-3 b-5 > 4
@end lilypond
-Setting @code{fingeringOrientations} will put fingerings next
+@noindent
+In this case, setting @code{fingeringOrientations} will put fingerings next
to note heads:
-@lilypond[verbatim,singleline,fragment,relative=1]
- \property Voice.fingeringOrientations = #'(left down)
+@lilypond[verbatim,raggedright,fragment,relative=1]
+ \set fingeringOrientations = #'(left down)
<c-1 es-2 g-4 bes-5 > 4
- \property Voice.fingeringOrientations = #'(up right down)
+ \set fingeringOrientations = #'(up right down)
<c-1 es-2 g-4 bes-5 > 4
@end lilypond
+
+By using single note chords, fingering instructions can be put close
+to note heads in monophonic music.
@seealso
Internals: @internalsref{FingerEvent}, and @internalsref{Fingering}.
+Examples: @inputfileref{input/regression,finger-chords.ly}.
@node Text scripts
@subsection Text scripts
note spacing, but by using the command @code{\fatText}, the widths
will be taken into account:
@c
-@lilypond[fragment,singleline,verbatim] \relative c' {
+@lilypond[fragment,raggedright,verbatim] \relative c' {
c4^"longtext" \fatText c4_"longlongtext" c4 }
@end lilypond
@refcommands
-@refcommand{fatText}, @refcommand{emptyText}.
-
+@cindex @code{\fatText}
+@code{\fatText},
+@cindex @code{\emptyText}
+@code{\emptyText}.
@seealso
In this manual: @ref{Text markup}.
-Internals: @internalsref{TextScriptEvent}, @internalsref{TextScript}
+Internals: @internalsref{TextScriptEvent}, @internalsref{TextScript}.
denotes the logical time, one denotes the grace timing. The above
example is shown here with timing tuples:
-@lilypond[singleline]
+@lilypond[raggedright]
<<
\relative c''{
c4 \grace c16 c4 \grace {
If you want to end a note with a grace, then the standard trick
is to put the grace notes after a ``space note'', e.g.
-@lilypond[fragment,verbatim, relative=2]
+@lilypond[fragment,verbatim,relative=2]
\context Voice {
<< { d1^\trill ( }
{ s2 \grace { c16[ d] } } >>
for example, to produce smaller type, and set directions. Hence, when
introducing layout tweaks, they should be inside the grace section,
for example,
-@lilypond[fragment,verbatim,relative 1]
+@lilypond[fragment,verbatim,relative=1]
\new Voice {
\acciaccatura {
- \property Voice.Stem \override #'direction = #-1
+ \override Stem #'direction = #-1
f16->
- \property Voice.Stem \revert #'direction
+ \revert Stem #'direction
}
g4
}
Another option is to change the variables @code{startGraceMusic},
@code{stopGraceMusic}, @code{startAccacciaturaMusic},
@code{stopAccacciaturaMusic}, @code{startAppoggiaturaMusic},
-@code{stopAppoggiaturaMstuic}. More information is in the file
-@file{ly/grace-init.ly}
+@code{stopAppoggiaturaMusic}. More information is in the file
+@file{ly/grace-init.ly}.
@seealso
@refbugs
-Grace notes cannot be used in the smallest size (@file{paper11.ly}).
-
A score that starts with an @code{\grace} section needs an explicit
@code{\context Voice} declaration, otherwise the main note and grace
note end up on different staves.
Grace note synchronization can also lead to surprises. Staff notation,
-such as key signatures, barlines, etc. are also synchronized. Take
+such as key signatures, bar lines, etc. are also synchronized. Take
care when you mix staves with grace notes and staves without, for example,
@lilypond[relative=2,verbatim,fragment]
expressions. Nesting or juxtaposing grace sections is not supported,
and might produce crashes or other errors.
-Overriding settings cannot be done in separate styles for appoggiatura
-and acciaccatura.
-
@node Glissando
@subsection Glissando
@cindex @code{\rfz}
-Absolute dynamic marks are specified using an variable after a
-note: @code{c4\ff}. The available dynamic marks are @code{\ppp},
+Absolute dynamic marks are specified using a command after a note:
+@code{c4\ff}. The available dynamic marks are @code{\ppp},
@code{\pp}, @code{\p}, @code{\mp}, @code{\mf}, @code{\f}, @code{\ff},
@code{\fff}, @code{\fff}, @code{\fp}, @code{\sf}, @code{\sff},
@code{\sp}, @code{\spp}, @code{\sfz}, and @code{\rfz}:
-@lilypond[verbatim,singleline,fragment,relative]
+@lilypond[verbatim,raggedright,fragment,relative]
c'\ppp c\pp c \p c\mp c\mf c\f c\ff c\fff
c2\sf c\rfz
@end lilypond
with @code{\!}. Because these marks are bound to notes, if you must
use spacer notes if multiple marks during one note are needed:
-@lilypond[fragment,verbatim,center,quote]
+@lilypond[fragment,verbatim]
c''\< c''\! d''\decr e''\rced
<< f''1 { s4 s4\< s4\! \> s4\! } >>
@end lilypond
example:
@example
- \property Staff.Hairpin \override #'minimum-length = #5
+ \override Staff.Hairpin #'minimum-length = #5
@end example
You can also use a text saying @emph{cresc.} instead of hairpins. Here
You can also supply your own texts:
@lilypond[fragment,relative,verbatim]
\context Voice {
- \property Voice.crescendoText = \markup { \italic "cresc. poco" }
- \property Voice.crescendoSpanner = #'dashed-line
+ \set crescendoText = \markup { \italic "cresc. poco" }
+ \set crescendoSpanner = #'dashed-line
a'2\< a a a\!\mf
}
@end lilypond
@item volta
This is the normal notation: Repeats are not written out, but
-alternative endings (voltas) are printed, left to right.
+alternative endings (volte) are printed, left to right.
@ignore
@item fold
alternative is assumed to be played more than once.
Normal notation repeats are used like this:
-@lilypond[fragment,verbatim,relative 1]
+@lilypond[fragment,verbatim,relative=1]
c1
\repeat volta 2 { c4 d e f }
\repeat volta 2 { f e d c }
@end lilypond
With alternative endings:
-@lilypond[fragment,verbatim,relative 1]
+@lilypond[fragment,verbatim,relative=1]
c1
\repeat volta 2 {c4 d e f}
\alternative { {d2 d} {f f,} }
@end lilypond
-@lilypond[fragment,verbatim,relative 1]
+@lilypond[fragment,verbatim,relative=1]
\context Staff {
\partial 4
\repeat volta 4 { e | c2 d2 | e2 f2 | }
stops a running volta bracket:
@end table
-@lilypond[verbatim, fragment,relative 2]
+@lilypond[verbatim,fragment,relative=2]
c4
- \property Score.repeatCommands = #'((volta "93") end-repeat)
+ \set Score.repeatCommands = #'((volta "93") end-repeat)
c4 c4
- \property Score.repeatCommands = #'((volta #f))
+ \set Score.repeatCommands = #'((volta #f))
c4 c4
@end lilypond
To place tremolo marks between notes, use @code{\repeat} with tremolo
style:
-@lilypond[verbatim,singleline]
+@lilypond[verbatim,raggedright]
\score {
\context Voice \notes\relative c' {
\repeat "tremolo" 8 { c16 d16 }
Tremolo marks can also be put on a single note. In this case, the
note should not be surrounded by braces.
-@lilypond[verbatim,singleline]
+@lilypond[verbatim,raggedright]
\repeat "tremolo" 4 c16
@end lilypond
In this manual: @ref{Tremolo subdivisions}, @ref{Repeats}.
Internals: tremolo beams are @internalsref{Beam} objects. Single stem
-tremolos are @internalsref{StemTremolo}s. The music expression is
-@internalsref{TremoloEvent},
+tremolos are @internalsref{StemTremolo} objects. The music expression is
+@internalsref{TremoloEvent}.
Example files: @inputfileref{input/regression,chord-tremolo.ly},
@inputfileref{input/regression,stem-tremolo.ly}.
`@code{:}[@var{length}]' after the note. The length must be at least 8.
A @var{length} value of 8 gives one line across the note stem. If the
length is omitted, then then the last value (stored in
-@code{Voice.tremoloFlags}) is used:
+@code{tremoloFlags}) is used:
-@lilypond[verbatim,fragment,center]
+@lilypond[verbatim,fragment]
c'2:8 c':32 | c': c': |
@end lilypond
Patterns of a one and two measures are replaced by percent-like signs,
patterns that divide the measure length are replaced by slashes:
-@lilypond[verbatim,singleline]
+@lilypond[verbatim,raggedright]
\context Voice { \repeat "percent" 4 { c'4 }
\repeat "percent" 2 { c'2 es'2 f'4 fis'4 g'4 c''4 }
}
@node Rhythmic music
@section Rhythmic music
+
+@menu
+* Showing melody rhythms::
+* Entering percussion::
+* Percussion staves::
+@end menu
+
+
+@node Showing melody rhythms
+@subsection Showing melody rhythms
+
Sometimes you might want to show only the rhythm of a melody. This
can be done with the rhythmic staff. All pitches of notes on such a
staff are squashed, and the staff itself has a single line:
Examples: @inputfileref{input/regression,rhythmic-staff.ly}.
-@menu
-* Percussion staves::
-* Percussion MIDI output::
-@end menu
+@node Entering percussion
+@subsection Entering percussion
+
+@cindex percussion
+@cindex drums
+
+@syntax
+
+Percussion notes may be entered in @code{\drums} mode, which is
+similar to @code{notes}. Each piece of percussion has a full name and
+an abbreviated name, and both be used in input files:
+
+@lilypond[raggedright]
+ \drums { hihat4 hh4 }
+@end lilypond
+
+The complete list of drum names is in the init file
+@file{ly/drumpitch-init.ly}.
+@c TODO: properly document this.
+
+@seealso
+
+Internals: @internalsref{DrumNoteEvent}.
@node Percussion staves
@subsection Percussion staves
multiline staff where each position in the staff refers to one piece
of percussion.
-@syntax
-Percussion staves are typeset with help of a set of Scheme
-functions. The system is based on the general MIDI drum-pitches.
-Include @file{drumpitch-init.ly} to use drum pitches. This file
-defines the pitches from the Scheme variable @code{drum-pitch-names},
-the definition of which can be read in @file{scm/drums.scm}. Each
-piece of percussion has a full name and an abbreviated name, and either
-the full name or the abbreviation may be used in input files.
-
-To typeset the music on a staff apply the function @code{drums->paper}
-to the percussion music. This function takes a list of percussion
-instrument names, notehead scripts and staff positions (that is:
-pitches relative to the C-clef) and transforms the input
-music by moving the pitch, changing the notehead and (optionally)
-adding a script:
+To typeset the music, the notes must be interpreted in a
+@internalsref{DrumStaff} and @internalsref{DrumVoice} contexts:
+
@c
-@lilypond[singleline,verbatim,quote]
-\include "drumpitch-init.ly"
-up = \notes { crashcymbal4 hihat8 halfopenhihat hh hh hh openhihat }
-down = \notes { bassdrum4 snare8 bd r bd sn4 }
+@lilypond[raggedright,verbatim]
+up = \drums { crashcymbal4 hihat8 halfopenhihat hh hh hh openhihat }
+down = \drums { bassdrum4 snare8 bd r bd sn4 }
\score {
- \apply #(drums->paper 'drums) \context Staff <<
- \clef percussion
- \new Voice { \voiceOne \up }
- \new Voice { \voiceTwo \down }
+ \new DrumStaff
+ << \new DrumVoice { \voiceOne \up }
+ \new DrumVoice { \voiceTwo \down }
+>> }
+@end lilypond
+
+The above example shows verbose polyphonic notation. The short
+polyphonic notation, described in @ref{Polyphony}, can also be used if
+the @internalsref{DrumVoices} are instantiated by hand first. For example,
+
+@lilypond[fragment]
+\drums \new DrumStaff <<
+ \context DrumVoice = "1" { s1 *2 }
+ \context DrumVoice = "2" { s1 *2 }
+ {
+ bd4 sn4 bd4 sn4
+ <<
+ { \repeat unfold 16 hh16 }
+ \\
+ { bd4 sn4 bd4 sn4 }
>>
-}
-
+ }
+>>
@end lilypond
-In the above example the music was transformed using the list @code{'drums}.
-The following lists are defined in @file{scm/drums.scm}:
+
+
+There are also other layout possibilities. To use these, set the
+property @code{drumStyleTable} in context @internalsref{DrumVoice}.
+The following variables have been predefined:
+
@table @code
-@item 'drums
-to typeset a typical drum kit on a five-line staff:
+@item drums-style
+is the default. It typesets a typical drum kit on a five-line staff
@lilypond[noindent]
-\include "drumpitch-init.ly"
nam = \lyrics { cymc cyms cymr hh hhc hho hhho hhp cb hc
bd sn ss tomh tommh tomml toml tomfh tomfl }
-mus = \notes { cymc cyms cymr hh hhc hho hhho hhp cb hc
+mus = \drums { cymc cyms cymr hh | hhc hho hhho hhp | \break cb hc
bd sn ss tomh tommh tomml toml tomfh tomfl s16 }
\score {
- <<
- \apply #(drums->paper 'drums) \context Staff <<
- \clef percussion
- \mus
- >>
- \context Lyrics \nam
- >>
- \paper {
- linewidth = 100.0\mm
- \translator {
- \StaffContext
+ << \new DrumStaff\with {
\remove Bar_engraver
\remove Time_signature_engraver
+ \override Stem #'transparent = ##t
+ \override Stem #'Y-extent-callback = ##f
minimumVerticalExtent = #'(-4.0 . 5.0)
- }
- \translator {
- \VoiceContext
- \remove Stem_engraver
- }
- }
-}
+ } \mus
+ \context Lyrics \nam
+ >>
+ \paper {
+ %% need to do this, because of indented @itemize
+ linewidth= 9 \cm
+ \translator { \ScoreContext
+ \override BarNumber #'transparent =##T
+}}}
@end lilypond
The drum scheme supports six different toms. When there fewer toms, simply
the three middle lines you use @code{tommh}, @code{tomml} and
@code{tomfh}.
-Because general MIDI does not contain rimshots the sidestick is used
-for this purpose instead.
-@item 'timbales
+@item timbales-style
to typeset timbales on a two line staff:
-@lilypond[singleline]
-\include "drumpitch-init.ly"
+@lilypond[raggedright]
nam = \lyrics { timh ssh timl ssl cb }
-mus = \notes { timh ssh timl ssl cb s16 }
+mus = \drums { timh ssh timl ssl cb s16 }
\score {
<<
- \apply #(drums->paper 'timbales) \context Staff <<
- \clef percussion
- \mus
- >>
- \context Lyrics \nam
- >>
- \paper {
- \translator {
- \StaffContext
+ \context DrumStaff \with {
\remove Bar_engraver
\remove Time_signature_engraver
- StaffSymbol \override #'line-count = #2
- StaffSymbol \override #'staff-space = #2
+ \override Stem #'transparent = ##t
+ \override Stem #'Y-extent-callback = ##f
+ \override StaffSymbol #'line-count = #2
+ \override StaffSymbol #'staff-space = #2
minimumVerticalExtent = #'(-3.0 . 4.0)
- }
- \translator {
- \VoiceContext
- \remove Stem_engraver
- }
-
- }
+ drumStyleTable = #timbales-style
+ } \mus
+ \context Lyrics \nam
+ >>
}
@end lilypond
-@item 'congas
+@item congas-style
to typeset congas on a two line staff:
-@lilypond[singleline]
-\include "drumpitch-init.ly"
+@lilypond[raggedright]
nam = \lyrics { cgh cgho cghm ssh cgl cglo cglm ssl }
-mus = \notes { cgh cgho cghm ssh cgl cglo cglm ssl s16 }
+mus = \drums { cgh cgho cghm ssh cgl cglo cglm ssl s16 }
\score {
<<
- \apply #(drums->paper 'congas) \context Staff <<
- \clef percussion
- \mus
- >>
- \context Lyrics \nam
- >>
- \paper {
- \translator {
- \StaffContext
+ \context DrumStaff\with {
\remove Bar_engraver
\remove Time_signature_engraver
- StaffSymbol \override #'line-count = #2
- StaffSymbol \override #'staff-space = #2
- minimumVerticalExtent = #'(-3.0 . 4.0)
- }
- \translator {
- \VoiceContext
- \remove Stem_engraver
- }
- }
+ drumStyleTable = #congas-style
+ \override StaffSymbol #'line-count = #2
+
+ %% this sucks; it will lengthen stems.
+ \override StaffSymbol #'staff-space = #2
+ \override Stem #'transparent = ##t
+ \override Stem #'Y-extent-callback = ##f
+ } \mus
+ \context Lyrics \nam
+ >>
}
@end lilypond
-@item 'bongos
+@item bongos-style
to typeset bongos on a two line staff:
-@lilypond[singleline]
-\include "drumpitch-init.ly"
+@lilypond[raggedright]
nam = \lyrics { boh boho bohm ssh bol bolo bolm ssl }
-mus = \notes { boh boho bohm ssh bol bolo bolm ssl s16 }
+mus = \drums { boh boho bohm ssh bol bolo bolm ssl s16 }
\score {
<<
- \apply #(drums->paper 'bongos) \context Staff <<
- \clef percussion
- \mus
- >>
- \context Lyrics \nam
- >>
- \paper {
- \translator {
- \StaffContext
+ \context DrumStaff\with {
\remove Bar_engraver
\remove Time_signature_engraver
- StaffSymbol \override #'line-count = #2
- StaffSymbol \override #'staff-space = #2
- minimumVerticalExtent = #'(-3.0 . 4.0)
- }
- \translator {
- \VoiceContext
- \remove Stem_engraver
- }
- }
+ \override StaffSymbol #'line-count = #2
+ drumStyleTable = #bongos-style
+
+ %% this sucks; it will lengthen stems.
+ \override StaffSymbol #'staff-space = #2
+ \override Stem #'transparent = ##t
+ \override Stem #'Y-extent-callback = ##f
+ } \mus
+ \context Lyrics \nam
+ >>
}
@end lilypond
-@item 'percussion
+
+@item percussion-style
to typeset all kinds of simple percussion on one line staves:
-@lilypond[singleline]
-\include "drumpitch-init.ly"
+@lilypond[raggedright]
nam = \lyrics { tri trio trim gui guis guil cb cl tamb cab mar hc }
-mus = \notes { tri trio trim gui guis guil cb cl tamb cab mar hc s16 }
+mus = \drums { tri trio trim gui guis guil cb cl tamb cab mar hc s16 }
\score {
<<
- \apply #(drums->paper 'percussion) \context Staff <<
- \clef percussion
- \mus
- >>
- \context Lyrics \nam
- >>
- \paper {
- \translator {
- \StaffContext
+ \context DrumStaff\with{
\remove Bar_engraver
+ drumStyleTable = #percussion-style
+ \override StaffSymbol #'line-count = #1
\remove Time_signature_engraver
- StaffSymbol \override #'line-count = #1
- minimumVerticalExtent = #'(-2.0 . 3.0)
- }
- \translator {
- \VoiceContext
- \remove Stem_engraver
- }
- }
+ \override Stem #'transparent = ##t
+ \override Stem #'Y-extent-callback = ##f
+ } \mus
+ \context Lyrics \nam
+ >>
}
@end lilypond
@end table
If you do not like any of the predefined lists you can define your own
list at the top of your file:
-@lilypond[singleline, verbatim]
-#(set-drum-kit 'mydrums `(
- (bassdrum default #f ,(ly:make-pitch -1 2 0))
- (snare default #f ,(ly:make-pitch 0 1 0))
- (hihat cross #f ,(ly:make-pitch 0 5 0))
- (pedalhihat xcircle "stopped" ,(ly:make-pitch 0 5 0))
- (lowtom diamond #f ,(ly:make-pitch -1 6 0))
+@lilypond[raggedright,verbatim]
+#(define mydrums '(
+ (bassdrum default #f -1)
+ (snare default #f 0)
+ (hihat cross #f 1)
+ (pedalhihat xcircle "stopped" 2)
+ (lowtom diamond #f 3)
))
-\include "drumpitch-init.ly"
-up = \notes { hh8 hh hh hh hhp4 hhp }
-down = \notes { bd4 sn bd toml8 toml }
-\score {
- \apply #(drums->paper 'mydrums) \context Staff <<
- \clef percussion
- \new Voice { \voiceOne \up }
- \new Voice { \voiceTwo \down }
+up = \drums { hh8 hh hh hh hhp4 hhp }
+down = \drums { bd4 sn bd toml8 toml }
+\score {
+ \new DrumStaff <<
+ \set DrumStaff.drumStyleTable
+ = #(alist->hash-table mydrums)
+ \new DrumVoice { \voiceOne \up }
+ \new DrumVoice { \voiceTwo \down }
>>
}
@end lilypond
-To use a modified existing list, one can prepend modifications to the
-the existing list:
-@example
-#(set-drum-kit 'mydrums (append `(
- (bassdrum default #f ,(ly:make-pitch -1 2 0))
- (lowtom diamond #f ,(ly:make-pitch -1 6 0))
-) (get-drum-kit 'drums)))
-@end example
+@seealso
-You can easily combine percussion notation with pitched notation.
-Indeed, the file @file{drumpitch-init.ly} replaces the normal pitch
-names, so you will have to reinclude @file{nederlands.ly} after the
-drum-pattern-definitions to enter normal notes:
-@c
-@lilypond[singleline,verbatim]
-\include "drumpitch-init.ly"
-up = \notes { crashcymbal4 hihat8 halfopenhihat hh hh hh openhihat }
-down = \notes { bassdrum4 snare8 bd r bd sn4 }
-\include "nederlands.ly"
-bass = \notes \transpose c c,, { a4. e8 r e g e }
-\score {
- <<
- \apply #(drums->paper 'drums) \new Staff <<
- \clef percussion
- \new Voice { \voiceOne \up }
- \new Voice { \voiceTwo \down }
- >>
- \new Staff { \clef "F_8" \bass }
- >>
-}
-@end lilypond
+Init files: @file{ly/drumpitch-init.ly}.
-@node Percussion MIDI output
-@subsection Percussion MIDI output
+Internals: @internalsref{DrumStaff}, @internalsref{DrumVoice}.
-In order to produce correct MIDI output you need to produce two score
-blocks---one for the paper and one for the MIDI output. To use the
-percussion channel you set the property @code{instrument} to
-@code{'drums}. Because the drum-pitches themselves are similar to the
-general MIDI pitches all you have to do is to insert the voices with
-none of the scheme functions to get the correct MIDI output:
+@refbugs
-@example
-\score @{
- \apply #(drums->paper 'mydrums) \context Staff <<
- \clef percussion
- @{ \up @} \\
- @{ \down @}
- >>
- \paper@{@}
-@}
-\score @{
- \context Staff <<
- \property Staff.instrument = #'drums
- \up \down
- >>
- \midi@{@}
-@}
-@end example
-
-@refbugs
-
-
-Chords entered with @code{< @dots{} >} do not work. This scheme is a
-temporary implementation.
+Short polyphonic notation, @code{<< @dots{} \\ @dots{} >>}, does not
+work for @internalsref{DrumVoices}.
+Because general MIDI does not contain rim shots, the sidestick is used
+for this purpose instead.
@node Piano music
@section Piano music
There is no support for putting chords across staves. You can get
this result by increasing the length of the stem in the lower stave so
it reaches the stem in the upper stave, or vice versa. An example is
-included with the distribution as @inputfileref{input/test,stem-cross-staff.ly}.
+included with the distribution as
+@inputfileref{input/test,stem-cross-staff.ly}.
Dynamics are not centered, but kludges do exist. See
@inputfileref{input/template,piano-dynamics.ly}.
@cindex cross staff stem
@cindex stem, cross staff
-
-@c fixme: should have hyperlinks as well.
+The distance between the two staves is normally fixed across the
+entire score. It is possible to tune this per system, but it does
+require arcane command incantations. See
+@inputfileref{input/test,piano-staff-distance.ly}.
+
Voices can switch automatically between the top and the bottom
staff. The syntax for this is
@example
- \autochange Staff \context Voice @{ @dots{}@var{music}@dots{} @}
+ \autochange \context Voice @{ @dots{}@var{music}@dots{} @}
@end example
The two staffs of the piano staff must be named @code{up} and
@code{down}.
-The autochanger switches on basis of pitch (central C is the turning
+The autochanger switches on basis of pitch (middle C is the turning
point), and it looks ahead skipping over rests to switch in
advance. Here is a practical example:
-@lilypond[verbatim,singleline,quote]
+@lilypond[verbatim,raggedright]
\score { \notes \context PianoStaff <<
\context Staff = "up" {
- \autochange Staff \context Voice = VA << \relative c' {
- g4 a b c d r4 a g } >> }
+ \autochange \new Voice \relative c' {
+ g4 a b c d r4 a g } }
\context Staff = "down" {
\clef bass
s1*2
@seealso
-In this manual: @ref{Manual staff switches}
+In this manual: @ref{Manual staff switches}.
Internals: @internalsref{AutoChangeMusic}.
quality output, staff switches should be specified manually.
+
@node Manual staff switches
@subsection Manual staff switches
@code{pedalSustainStyle} property to @code{bracket} objects:
@lilypond[fragment,verbatim]
- \property Staff.pedalSustainStyle = #'bracket
+ \set Staff.pedalSustainStyle = #'bracket
c''4\sustainDown d''4 e''4
a'4\sustainUp\sustainDown
f'4 g'4 a'4\sustainUp
@end lilypond
A third style of pedal notation is a mixture of text and brackets,
-obtained by setting @code{pedal-type} to @code{mixed}:
+obtained by setting the @code{pedalSustainStyle} style property to
+@code{mixed}:
@lilypond[fragment,verbatim]
- \property Staff.pedalSustainStyle = #'mixed
+ \set Staff.pedalSustainStyle = #'mixed
c''4\sustainDown d''4 e''4
c'4\sustainUp\sustainDown
f'4 g'4 a'4\sustainUp
@end lilypond
-The default `*Ped' style for sustain and damper pedals corresponds to
-@code{\pedal-type = #'text}. However, @code{mixed} is the default style
-for a sostenuto pedal:
+The default `*Ped.' style for sustain and damper pedals corresponds to
+style @code{#'text}. The sostenuto pedal uses @code{mixed} style by
+default.
@lilypond[fragment,verbatim]
c''4\sostenutoDown d''4 e''4 c'4 f'4 g'4 a'4\sostenutoUp
bracket may be extended to the end of the note head:
@lilypond[fragment,verbatim]
-\property Staff.PianoPedalBracket \override
+\override Staff.PianoPedalBracket
#'shorten-pair = #'(0 . -1.0)
c''4\sostenutoDown d''4 e''4 c'4
f'4 g'4 a'4\sostenutoUp
@lilypond[fragment,relative,verbatim]
\context PianoStaff <<
- \property PianoStaff.connectArpeggios = ##t
+ \set PianoStaff.connectArpeggios = ##t
\new Staff { <c' e g c>\arpeggio }
\new Staff { \clef bass <c,, e g>\arpeggio }
>>
@end lilypond
The direction of the arpeggio is sometimes denoted by adding an
-arrowhead to the wiggly line. This can be typeset by setting
-@code{arpeggio-direction}:
+arrowhead to the wiggly line:
@lilypond[fragment,relative,verbatim]
\context Voice {
- \property Voice.Arpeggio \set #'arpeggio-direction = #1
+ \arpeggioUp
<c e g c>\arpeggio
- \property Voice.Arpeggio \set #'arpeggio-direction = #-1
+ \arpeggioDown
<c e g c>\arpeggio
}
@end lilypond
A square bracket on the left indicates that the player should not
-arpeggiate the chord. To draw these brackets, set the
-@code{molecule-callback} property of @code{Arpeggio} or
-@code{PianoStaff.Arpeggio} objects to @code{\arpeggioBracket}, and use
-@code{\arpeggio} statements within the chords as before:
+arpeggiate the chord:
@lilypond[fragment,relative,verbatim]
- \property PianoStaff.Arpeggio \override
- #'molecule-callback = \arpeggioBracket
- <c' e g c>\arpeggio
+ \arpeggioBracket
+ <c' e g c>\arpeggio
@end lilypond
@refcommands
-@cindex @code{\arpeggioBracket}
-@code{\arpeggioBracket},
@cindex @code{\arpeggio}
-@code{\arpeggio}.
+@code{\arpeggio},
+@cindex @code{\arpeggioUp}
+@code{\arpeggioUp},
+@cindex @code{\arpeggioDown}
+@code{\arpeggioUp},
+@cindex @code{\arpeggioBoth}
+@code{\arpeggioBoth},
+@cindex @code{\arpeggioBracket}
+@code{\arpeggioBracket}.
@seealso
@lilypond[fragment,relative,verbatim]
\context PianoStaff <<
- \property PianoStaff.followVoice = ##t
+ \set PianoStaff.followVoice = ##t
\context Staff \context Voice {
c1
\change Staff=two
@end example
@cindex @code{\property}, in @code{\lyrics}
-Similarly, a period following a alphabetic sequence, is included in the
-resulting string. As a consequence, spaces must be inserted around
-@code{\property} commands:
+Similarly, a period following a alphabetic sequence, is included in
+the resulting string. As a consequence, spaces must be inserted around
+property commands:
@example
- \property Lyrics . LyricText \set #'font-shape = #'italic
+ \override Score . LyricText #'font-shape = #'italic
@end example
@cindex @code{_}
Internals: @internalsref{LyricEvent}, @internalsref{HyphenEvent}, and
@internalsref{ExtenderEvent}.
+Examples: @inputfileref{input/test,lyric-hyphen-retain.ly}.
+
@refbugs
-The definition of lyrics mode is too complex.
+The definition of lyrics mode is too complex.
+
+
@node The Lyrics context
@subsection The Lyrics context
-Lyrics are printed by interpreting them in @internalsref{Lyrics} context:
+Lyrics are printed by interpreting them in a @internalsref{Lyrics} context:
@example
\context Lyrics \lyrics @dots{}
@end example
@cindex automatic syllable durations
-@cindex @code{\addlyrics}
+@cindex @code{\lyricsto}
@cindex lyrics and melodies
This will place the lyrics according to the durations that were
entered. The lyrics can also be aligned under a given melody
automatically. In this case, it is no longer necessary to enter the
correct duration for each syllable. This is achieved by combining the
-melody and the lyrics with the @code{\addlyrics} expression:
+melody and the lyrics with the @code{\lyricsto} expression:
@example
-\addlyrics
- \notes @dots{}
- \context Lyrics @dots{}
+\lyricsto @var{name} \new Lyrics @dots{}
@end example
-@cindex staff order, with @code{\addlyrics}
+This aligns the lyrics to the
+@c
+notes of the @internalsref{Voice} context called @var{name}, which has
+to exist. Therefore, normally the @code{Voice} is specified first, and
+then the lyrics are specified with @code{\lyricsto}.
-Normally, this will put the lyrics below the staff. For different or
-more complex orderings, the best way is to setup the hierarchy of
-staves and lyrics first, e.g.
+For different or more complex orderings, the best way is to setup the
+hierarchy of staves and lyrics first, e.g.
@example
\context ChoirStaff \notes <<
- \context Lyrics = sopr @{ s1 @}
- \context Staff = soprStaff @{ s1 @}
- \context Lyrics = tenor @{ s1 @}
- \context Staff = tenorStaff @{ s1 @}
+ \context Lyrics = sopranoLyrics @{ s1 @}
+ \context Voice = soprano @{ @emph{music} @}
+ \context Lyrics = tenorLyrics @{ s1 @}
+ \context Voice = tenor @{ @emph{music} @}
>>
@end example
and then combine the appropriate melodies and lyric lines:
@example
- \addlyrics
- \context Staff = soprStaff @emph{the music}
- \context Lyrics = sopr @emph{the lyrics}
+ \lyricsto "soprano" \new Lyrics @emph{the lyrics}
@end example
-putting both together, you would get
+@noindent
+The final input would resemble
+
@example
-\context ChoirStaff \notes <<
- \context Lyrics = @dots{}
- \context Staff = @dots{}
- \addlyrics @dots{}
->>
-@end example
+ << \context ChoirStaff \notes << @emph{setup the music} >>
+ \lyricsto "soprano" @emph{etc}
+ \lyricsto "alto" @emph{etc}
+ @emph{etc}
+ >>
+@end example
+
+
+The @code{\lyricsto} command detects melismata: it only puts one
+syllable under a tied or slurred group of notes. If you want to force
+an unslurred group of notes to be a melisma, then insert
+@code{\melisma} after the first note of the group, and
+@code{\melismaEnd} after the last one, e.g.
+
+@lilypond[relative=1,raggedright,fragment,verbatim]
+<< \context Voice = "lala" { \time 3/4
+ f4 g8
+ \melisma
+ f e f
+ \melismaEnd
+ e2 }
+ \lyricsto "lala" \new Lyrics \lyrics {
+ la di __ daah
+ } >>
+@end lilypond
+
+In addition, notes are considered a melisma if they are manually
+beamed, and automatic beaming (see @ref{Setting automatic beam
+behavior}) is switched off. The criteria for deciding melismata
+can be tuned with the property @code{melismaBusyProperties}. See
+@internalsref{Melisma_translator} for more information.
+
+When multiple stanzas are put on the same melody, it can happen that
+two stanzas have melismata in different locations. This can be
+remedied by switching off melismata for one
+@internalsref{Lyrics}. This is achieved by setting
+the @code{ignoreMelismata} property to @code{#t}. An example is shown
+in @inputfileref{input/regression,lyric-combine-new.ly}.
@cindex SATB
@cindex choral score
A complete example of a SATB score setup is in the file
@inputfileref{input/template,satb.ly}.
-@seealso
-Internals: @internalsref{LyricCombineMusic}, @internalsref{Lyrics}
+@refcommands
+
+@code{\melisma}, @code{\melismaEnd}
+@cindex @code{\melismaEnd}
+@cindex @code{\melisma}
-Examples: @inputfileref{input/template,satb.ly}.
+@seealso
+
+Internals: Music expressions: @internalsref{LyricCombineMusic},
+Contexts: @internalsref{Lyrics}, @internalsref{Melisma_translator}.
+Examples: @inputfileref{input/template,satb.ly},
+@inputfileref{input/regression,lyric-combine-new.ly}.
+
@refbugs
-@code{\addlyrics} is not automatic enough: melismata are not detected
-automatically, and melismata are not stopped when they hit a rest. A
-melisma on the last note in a melody is not printed.
+Melismata are not detected automatically, and extender lines must be
+inserted by hand.
+
+For proper processing of extender lines, the
+@internalsref{Lyrics} and @internalsref{Voice} should be
+linked. This can be achieved either by using @code{\lyricsto} or by
+setting corresponding names for both contexts. The latter is explained
+in @ref{More stanzas}.
@node More stanzas
@subsection More stanzas
-
@cindex phrasing, in lyrics
The lyrics should be aligned with the note heads of the melody. To
achieve this, each line of lyrics should be marked to correspond with
-the melodic line.
+the melodic line. This is done automatically when @code{\lyricsto},
+but it can also be done manually.
To this end, give the @internalsref{Voice} context an identity:
@example
g2 e4 a2 f4 g2. @}
@end example
-Then set the @internalsref{LyricsVoice} contexts to names starting with
+Then set the @internalsref{Lyrics} contexts to names starting with
that identity followed by a dash. In the preceding example, the
@internalsref{Voice} identity is @code{duet}, so the identities of the
-@internalsref{LyricsVoice}s are marked @code{duet-1} and @code{duet-2}:
+@internalsref{Lyrics}s are marked @code{duet-1} and @code{duet-2}:
@example
- \context LyricsVoice = "duet-1" @{
+ \context Lyrics = "duet-1" @{
Hi, my name is bert. @}
- \context LyricsVoice = "duet-2" @{
+ \context Lyrics = "duet-2" @{
Ooooo, ch\'e -- ri, je t'aime. @}
@end example
The complete example is shown here:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
\score {
-\addlyrics
- \notes \relative c'' \context Voice = duet { \time 3/4
+ << \notes \relative c'' \context Voice = duet { \time 3/4
g2 e4 a2 f4 g2. }
- \lyrics \context Lyrics <<
- \context LyricsVoice = "duet-1" {
- \property LyricsVoice . stanza = "Bert"
- Hi, my name is bert. }
- \context LyricsVoice = "duet-2" {
- \property LyricsVoice . stanza = "Ernie"
- Ooooo, ch\'e -- ri, je t'aime. }
- >>
+ \lyrics << \lyricsto "duet" \new Lyrics {
+ \set stanza = "B."
+ \set vocNam = "Bert"
+ Hi, my name is bert. }
+ \lyricsto "duet" \new Lyrics {
+ \set stanza = "E."
+ \set vocNam = "Ernie"
+ Ooooo, ch\'e -- ri, je t'aime.
+ }
+ >> >>
}
@end lilypond
@cindex singer's names
@cindex name of singer
-Stanza numbers can be added by setting @code{LyricsVoice.stanza}, e.g.
+Stanza numbers can be added by setting @code{stanza}, e.g.
@example
- \property LyricsVoice . stanza = "Bert"
+ \set stanza = "B."
@dots{}
- \property LyricsVoice . stanza = "Ernie"
+ \set stanza = "E."
@end example
Notice how dots are surrounded with spaces in @code{\lyrics} mode, to
-prevent @code{LyricsVoice.stanza} being interpreted as a single
+prevent @code{stanza} being interpreted as a single
string.
-Names of the singers should be added using @code{LyricsVoice
-. instrument} and @code{LyricsVoice . instr}, analogous to instrument
-annotations for staves.
-
+This example also demonstrates how names of the singers can be added
+using @code{vocalName} analogous to instrument annotations for staves.
+A short version may be entered as @code{vocNam}.
+
To make empty spaces in lyrics, use @code{\skip}.
+@seealso
+
+Internals: Layout objects @internalsref{LyricText} and
+@internalsref{VocalName}. Music expressions:
+@internalsref{LyricEvent}.
@refbugs
The ambitus is typically notated on a per-voice basis at the very
beginning of a piece, e.g. nearby the initial clef or time signature of
-each staff. The range is graphically specified by two noteheads, that
+each staff. The range is graphically specified by two note heads, that
represent the minimum and maximum pitch. Some publishers use a textual
notation: they put the range in words in front of the corresponding
staff. LilyPond only supports the graphical ambitus notation.
@end example
This results in the following output:
-@lilypond[singleline]
+
+@lilypond[raggedright]
upper = \notes \relative c {
\clef "treble"
\key c \minor
It is possible to tune individual ambituses for multiple voices on a
single staff, for example by erasing or shifting them horizontally. An
-example is in @inputfileref{input/test,ambitus-mixed.ly}
+example is in @inputfileref{input/test,ambitus-mixed.ly}.
@seealso
-Internals: @internalsref{Ambitus}
+Internals: @internalsref{Ambitus}.
Examples: @inputfileref{input/regression,ambitus.ly},
@inputfileref{input/test,ambitus-mixed.ly}.
@example
e8 fis gis a b cis' dis' e'
-\property TabStaff.minimumFret = #8
+\set TabStaff.minimumFret = #8
e8 fis gis a b cis' dis' e'
@end example
@lilypond[noindent]
frag = \notes {
\key e \major
e8 fis gis a b cis' dis' e'
- \property TabStaff.minimumFret = #8
+ \set TabStaff.minimumFret = #8
e8 fis gis a b cis' dis' e'
}
\score {
You can change the tuning of the strings. A string tuning is given as
a Scheme list with one integer number for each string, the number
-being the pitch (measured in semitones relative to central C) of an
+being the pitch (measured in semitones relative to middle C) of an
open string. The numbers specified for @code{stringTuning} are the
numbers of semitones to subtract or add, starting the specified pitch
by default middle C, in string order. Thus, the notes are e, a, d, and
@lilypond[fragment,verbatim]
\context TabStaff <<
- \property TabStaff.stringTunings = #'(-5 -10 -15 -20)
+ \set TabStaff.stringTunings = #'(-5 -10 -15 -20)
\notes {
a,4 c' a e' e c' a e'
set of pitches, so they can be transposed:
-@lilypond[verbatim,singleline]
+@lilypond[verbatim,raggedright]
twoWays = \notes \transpose c c' {
\chords {
c1 f:sus4 bes/f
names. It is introduced by the keyword @code{\chords}.
In chords mode, a chord is entered by the root, which is entered
like a common pitch:
-@lilypond[fragment,verbatim,quote, relative=1]
+@lilypond[fragment,verbatim,relative=1]
\chords { es4. d8 c2 }
@end lilypond
@cindex chord entry
Other chords may be entered by suffixing a colon, and introducing a
modifier, and optionally, a number:
@c
-@lilypond[fragment,verbatim,quote]
+@lilypond[fragment,verbatim]
\chords { e1:m e1:7 e1:m7 }
@end lilypond
The first number following the root is taken to be the `type' of the
to a chord. Additions are added after the number following
the colon, and are separated by dots:
@c
-@lilypond[verbatim,fragment,quote]
+@lilypond[verbatim,fragment]
\chords { c:5.6 c:3.7.8 c:3.6.13 }
@end lilypond
Chord steps can be altered by suffixing a @code{-} or @code{+} sign
to the number:
-@lilypond[verbatim,fragment,quote]
+@lilypond[verbatim,fragment]
\chords { c:7+ c:5+.3- c:3-.5-.7- }
@end lilypond
Removals are specified similarly, and are introduced by a caret. They
An inversion (putting one pitch of the chord on the bottom), as well
as bass notes, can be specified by appending
@code{/}@var{pitch} to the chord:
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
\chords { c1 c/g c/f }
@end lilypond
@cindex @code{/+}
A bass note can be added instead of transposed out of the chord,
by using @code{/+}@var{pitch}.
-@lilypond[fragment,verbatim,center]
+@lilypond[fragment,verbatim]
\chords { c1 c/+g c/+f }
@end lilypond
Chords is a mode similar to @code{\lyrics}, @code{\notes} etc. Most
of the commands continue to work, for example, @code{r} and
-@code{\skip} can be used to insert rests and spaces, and
-@code{\property} may be used to change various settings.
+@code{\skip} can be used to insert rests and spaces, and property
+commands may be used to change various settings.
The chords may be entered either using the notation
described above, or directly using @code{<} and @code{>}:
-@lilypond[verbatim,singleline]
+@lilypond[verbatim,raggedright]
scheme = \notes {
\chords {a1 b c} <d' f' a'> <e' g' b'>
}
display chord names when there is a change in the chords scheme and at
the start of a new line:
-@lilypond[verbatim, linewidth=9cm]
+@lilypond[verbatim,linewidth=9\cm]
scheme = \chords {
c1:m c:m \break c:m c:m d
}
\score {
\notes <<
\context ChordNames {
- \property ChordNames.chordChanges = ##t
+ \set chordChanges = ##t
\scheme }
\context Staff \transpose c c' \scheme
>>
@lilypond[fragment,verbatim]
\context ChordNames \chords {
c:7sus4
- \property ChordNames.chordNameSeparator
- = \markup { \typewriter "|" }
+ \set chordNameSeparator
+ = \markup { \typewriter "|" }
c:7sus4 }
@end lilypond
function. Special note names (for example, the German ``H'' for a
B-chord) can be produced by storing a new function in this property.
-The pre-defined variables @code{\germanChords},
+The predefined variables @code{\germanChords},
@code{\semiGermanChords} set these variables.
* Bar numbers::
* Instrument names::
* Transpose::
+* Instrument transpositions::
* Multi measure rests::
* Automatic part combining::
* Hiding staves::
* Different editions from one source::
-* Sound output for transposing instruments::
+* Quoting other voices::
@end menu
@node Multiple staff contexts
To print a rehearsal mark, use the @code{\mark} command:
@lilypond[fragment,verbatim]
\relative c'' {
- c1 \mark "A"
- c1 \mark "B"
- c1 \mark "12"
- c1 \mark "13"
- c1
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark #8
+ c1 \mark \default
+ c1 \mark \default
}
@end lilypond
+@noindent
+(The letter I is skipped in accordance with engraving traditions.)
+
The mark is incremented automatically if you use @code{\mark
-\default}. The value to use is stored in the property
-@code{rehearsalMark} is used and automatically incremented.
+\default}, but you can also use an integer argument to set the mark
+manually. The value to use is stored in the property
+@code{rehearsalMark}.
+
+The style is defined by the property @code{markFormatter}. It is a
+function taking the current mark (an integer) and the current context
+as argument. It should return a markup object. In the following
+example, @code{markFormatter} is set to a canned procedure. After a
+few measures, it is set to function that produces a boxed number.
+
+@lilypond[verbatim,fragment,relative=1]
+ \set Score.markFormatter = #format-mark-numbers
+ c1 \mark \default
+ c1 \mark \default
+ \set Score.markFormatter
+ = #(lambda (mark context)
+ (make-bold-markup (make-box-markup (number->string mark))))
+ c1 \mark \default
+ c1 \mark \default
+@end lilypond
+
+The file @file{scm/translation-functions.scm} contains the definitions
+of @code{format-mark-numbers} (the default format) and
+@code{format-mark-letters}. They can be used as inspiration for other
+formatting functions.
+
+
+@cindex coda on bar line
+@cindex segno on bar line
+@cindex fermata on bar line
+@cindex bar lines, symbols on
The @code{\mark} command can also be used to put signs like coda,
-segno and fermatas on a barline. Use @code{\markup} to
+segno and fermatas on a bar line. Use @code{\markup} to
to access the appropriate symbol:
@lilypond[fragment,verbatim,relative=1]
c1
@end lilypond
-In this case, during line breaks,
-marks must also be printed at the end of the line, and not at the
-beginning. Use the following to force that behavior:
+In this case, during line breaks, marks must also be printed at the
+end of the line, and not at the beginning. Use the following to force
+that behavior:
@example
-\property Score.RehearsalMark \override
+\override Score.RehearsalMark
#'break-visibility = #begin-of-line-invisible
@end example
-See @inputfileref{input/test,boxed-molecule.ly} for putting boxes
-around the marks.
-
@cindex fermatas
@cindex coda
@cindex segno
-@cindex barlines, putting symbols on
+@cindex bar lines, putting symbols on
@seealso
-Internals: @internalsref{MarkEvent}, @internalsref{RehearsalMark}
+Internals: @internalsref{MarkEvent}, @internalsref{RehearsalMark}.
+
+Init files: @file{scm/translation-functions.scm} contains the
+definition of @code{format-mark-numbers} and
+@code{format-mark-letters}. They can be used as inspiration for other
+formatting functions.
-Examples: @inputfileref{input/test,boxed-molecule.ly}.
+Examples: @inputfileref{input/regression,rehearsal-mark-letter.ly},
+@inputfileref{input/regression,rehearsal-mark-number.ly}.
@node Bar numbers
whose source is available as
@inputfileref{input/test,bar-number-regular-interval.ly}:
-@lilypondfile[notexidoc]{bar-number-regular-interval.ly}
+@lilypondfile[]{bar-number-regular-interval.ly}
@seealso
used, for the next ones @code{instr} is used:
@quotation
-@lilypond[verbatim,singleline]
- \property Staff.instrument = "ploink " { c''4 }
+@lilypond[verbatim,raggedright]
+ \set Staff.instrument = "ploink " { c''4 }
@end lilypond
@end quotation
names:
@quotation
-@lilypond[fragment,verbatim,singleline]
+@lilypond[fragment,verbatim,raggedright]
\notes {
- \property Staff.instrument = \markup {
+ \set Staff.instrument = \markup {
\column < "Clarinetti"
{ "in B"
- \smaller \musicglyph #"accidentals--1"
+ \smaller \flat
}
>
}
\transpose @var{from} @var{to} @var{musicexpr}
@end example
-This means that @var{musicexpr} is transposed by the interval
-between @var{from} and @var{to}.
+This means that @var{musicexpr} is transposed by the interval between
+the pitches @var{from} and @var{to}: any note with pitch @code{from}
+is changed to @code{to}.
+
+
+For example, consider a piece written in the key of D major. If
+this piece is a little too low for its performer, it can be
+transposed up to E major with
+@example
+ \transpose d e @dots{}
+@end example
+
+Consider a part written for violin (a C instrument). If
+this part is to be played on the A clarinet, the following
+transposition will produce the appropriate part
+
+@example
+ \transpose a c @dots{}
+@end example
-@code{\transpose} distinguishes between enharmonic pitches: both
-@code{\transpose c cis} or @code{\transpose c des} will transpose up
-half a tone. The first version will print sharps and the second
-version will print flats:
+Since @var{from} and @var{to} are pitches, @code{\transpose} must be
+inside a @code{\notes} section. @code{\transpose} distinguishes
+between enharmonic pitches: both @code{\transpose c cis} or
+@code{\transpose c des} will transpose up half a tone. The first
+version will print sharps and the second version will print flats:
-@lilypond[singleline, verbatim]
+@lilypond[raggedright,verbatim]
mus =\notes { \key d \major cis d fis g }
\score { \notes \context Staff {
\clef "F" \mus
}}
@end lilypond
+
@seealso
Internals: @internalsref{TransposedMusic}, and
@code{\relative} will have no effect music that appears inside a
@code{\transpose}.
+@node Instrument transpositions
+@subsection Instrument transpositions
+
+The key of a transposing instrument can also be specified. This
+applies to many wind instruments, for example, clarinets (B-flat, A and
+E-flat), horn (F) and trumpet (B-flat, C, D and E-flat).
+
+@syntax
+
+The transposition is entered after the keyword @code{\transposition}:
+
+@example
+ \transposition bes %% B-flat clarinet
+@end example
+
+This command sets the property @code{instrumentTuning}. The value of
+this property is used for MIDI output and quotations. It does not
+affect how notes are printed in the current staff.
+@cindex transposition, MIDI
+@cindex transposition, instrument
@node Multi measure rests
@lilypond[fragment,verbatim]
\time 4/4 r1 | R1 | R1*2
- \property Score.skipBars = ##t R1*17 R1*4
+ \set Score.skipBars = ##t R1*17 R1*4
@end lilypond
The @code{1} in @code{R1} is similar to the duration notation used for
durations. This can be done with augmentation dots or fractions:
@lilypond[fragment,verbatim]
- \property Score.skipBars = ##t
+ \set Score.skipBars = ##t
\time 3/4
R2. | R2.*2
\time 13/8
The syntax for part combining is
@example
- \partcombine @var{context} @var{musicexpr1} @var{musicexpr2}
+ \partcombine @var{musicexpr1} @var{musicexpr2}
@end example
-where the pieces of music @var{musicexpr1} and @var{musicexpr2} will be
-combined into one context of type @var{context}. The music expressions
-must be interpreted by contexts whose names should start with @code{one}
-and @code{two}.
+
+The music expressions will be interpreted as @internalsref{Voice} contexts.
The following example demonstrates the basic functionality of the part
combiner: putting parts on one staff, and setting stem directions and
polyphony:
-@lilypond[verbatim,singleline,fragment]
- \context Staff <<
- \context Voice=one \partcombine Voice
- \context Thread=one \relative c'' {
+@lilypond[verbatim,raggedright,fragment,relative=1]
+ \new Staff \partcombine
+ {
g a( b) r
}
- \context Thread=two \relative c'' {
+ {
g r4 r f
}
- >>
@end lilypond
The first @code{g} appears only once, although it was
If you just want the merging parts, and not the textual markings, you
may set the property @var{soloADue} to false:
-@lilypond[verbatim,singleline,fragment]
- \context Staff <<
- \property Staff.soloADue = ##f
- \context Voice=one \partcombine Voice
- \context Thread=one \relative c'' {
- b4 a c g
- }
- \context Thread=two \relative c'' {
- d,2 a4 g'
+@lilypond[verbatim,raggedright,fragment,relative=1]
+ \new Staff <<
+ \set Staff.soloADue = ##f
+ \partcombine
+ {
+ g a( b) r
}
- >>
+ {
+ g r4 r f
+ } >>
@end lilypond
@seealso
Internals: @internalsref{PartCombineMusic},
-@internalsref{Thread_devnull_engraver}, and
-@internalsref{Voice_devnull_engraver} and @internalsref{A2_engraver}.
+@internalsref{SoloOneEvent}, and
+@internalsref{SoloTwoEvent}, and
+@internalsref{UnisonoEvent}.
@refbugs
-The syntax for naming contexts in inconsistent with the syntax for
-combining stanzas.
-
In @code{soloADue} mode, when the two voices play the same notes on and
off, the part combiner may typeset @code{a2} more than once in a
-measure:
-
-@lilypond[fragment,singleline]
- \context Staff <<
- \context Voice=one \partcombine Voice
- \context Thread=one \relative c'' {
- c b c b c a c a
- }
- \context Thread=two \relative c'' {
- b b b b f a f a
- }
- >>
-@end lilypond
+measure.
-The part combiner is rather buggy, and it will be replaced by a better
-mechanism in the near future.
+@code{\partcombine} can not be inside @code{\times}.
-@cindex @code{Thread_devnull_engraver}
-@cindex @code{Voice_engraver}
-@cindex @code{A2_engraver}
+Internally, the @code{\partcombine} interprets both arguments as
+@code{Voice}s named @code{one} and @code{two}, and then decides when
+the parts can be combined. Consequently, if the arguments switch to
+differently named @internalsref{Voice} contexts, then the events in
+those will be ignored.
@node Hiding staves
@subsection Hiding staves
In orchestral scores, staff lines that only have rests are usually
removed. This saves some space. This style is called `French Score'.
-For @internalsref{Lyrics}, @internalsref{LyricsVoice},
+For @internalsref{Lyrics},
@internalsref{ChordNames} and @internalsref{FiguredBass}, this is
switched on by default. When these line of these contexts turn out
empty after the line-breaking process, they are removed.
from the first page too, set @code{remove-first} to false
in @internalsref{RemoveEmptyVerticalGroup}.
+Another application is making ossia sections, i.e. alternative
+melodies on a separate piece of staff, with help of a Frenched
+staff. See @inputfileref{input/test,ossia.ly} for an example.
+
+
@node Different editions from one source
@subsection Different editions from one source
\tag #'part <<
R1 \\
@{
- \property Voice.fontSize = #-1
+ \set fontSize = #-1
c4_"cue" f2 g4 @}
>>
\tag #'score R1
@end example
would yield
-@lilypondfile[notexidoc]{tag-filter.ly}
+@lilypondfile[]{tag-filter.ly}
The argument of the @code{\tag} command should be a symbol, or a list
of symbols, for example,
@seealso
-Examples: @inputfileref{input/regression,tag-filter.ly}
+Examples: @inputfileref{input/regression,tag-filter.ly}.
-@node Sound output for transposing instruments
-@subsection Sound output for transposing instruments
+@node Quoting other voices
+@subsection Quoting other voices
-When you want to make a MIDI file from a score containing transposed
-and untransposed instruments, you have to instruct LilyPond the pitch
-offset (in semitones) for the transposed instruments. This is done
-using the @code{transposing} property. It does not affect printed
-output:
-
-@cindex @code{transposing}
+With quotations, fragments of other parts can be inserted into a part
+directly. Before a part can be quoted, it must be marked especially as
+quotable. This is done with code @code{\addquote} command. The
+quotation may then be done with @code{\quote}
@example
- \property Staff.instrument = #"Cl. in B-flat"
- \property Staff.transposing = #-2
+ \addquote @var{name} @var{music}
+ \quote @var{name} @var{duration}
@end example
+@noindent
+
+Here, @var{name} is an identifying string. The @var{music} is any kind
+of music. This is an example of @code{\addquote}:
+
+@verbatim
+\addquote clarinet \notes\relative c' {
+ f4 fis g gis
+}
+@end verbatim
+
+During a part, a piece of music can be quoted with the @code{\quote}
+command.
+
+@verbatim
+ \quote clarinet 2.
+@end verbatim
+
+This would cite 3 quarter notes (a dotted half note) of the previously
+added clarinet voice.
+
+Quotations take into account the transposition both source and target
+instruments, if they are specified using the @code{\transposition} command.
+
+@lilypond[verbatim fragment]
+\addquote clarinet \notes\relative c' {
+ \transposition bes
+ f4 fis g gis
+}
+\score {
+ \notes {
+ e'8 f'8 \quote clarinet 2
+} }
+@end lilypond
+
+@refbugs
+
+Only the contents of the first @internalsref{Voice} occurring in an
+@code{\addquote} command will be considered for quotation, so
+@var{music} can not contain @code{\new} and @code{\context Voice}
+statements that would switch to a different Voice.
+
+
+@seealso
+
+In this manual: @ref{Instrument transpositions}.
+
+Examples: @inputfileref{input/regression,quote.ly}
+@inputfileref{input/regression,quote-transposition.ly}
+
+Internals: @internalsref{QuoteMusic}.
+
+
+
+
@node Ancient notation
@section Ancient notation
@ref{Ancient note heads}, @ref{Ancient accidentals}, @ref{Ancient
rests}, @ref{Ancient clefs}, @ref{Ancient flags} and @ref{Ancient time
signatures}. By manipulating such a grob property, the typographical
-appearance of the affected graphical objects can be accomodated for a
-specific notation flavour without need for introducing any new
+appearance of the affected graphical objects can be accommodated for a
+specific notation flavor without need for introducing any new
notational concept.
notes and all smaller durations. Stems are centered on the note
heads. This style is in particular useful when transcribing mensural
music, e.g. for the incipit. The @code{mensural} style finally
-produces note heads that mimick the look of note heads in historic
+produces note heads that mimic the look of note heads in historic
printings of the 16th century.
The following example demonstrates the @code{neo_mensural} style:
-@lilypond[fragment,singleline,verbatim]
- \property Voice.NoteHead \set #'style = #'neo_mensural
+@lilypond[fragment,raggedright,verbatim]
+ \override NoteHead #'style = #'neo_mensural
a'\longa a'\breve a'1 a'2 a'4 a'8 a'16
@end lilypond
select ancient accidentals. Supported styles are
@code{mensural}, @code{vaticana}, @code{hufnagel} and @code{medicaea}.
-@lilypond[singleline,26pt]
+@lilypond[raggedright,staffsize=26]
\score {
\notes {
\fatText
accidentals. @ref{Key signature} gives a general introduction into
the use of key signatures.
-Internals: @internalsref{KeySignature}
+Internals: @internalsref{KeySignature}.
Examples: @inputfileref{input/test,ancient-accidentals.ly}.
from the @code{default} style only in that the quarter rest looks like
a horizontally mirrored 8th rest. The @code{neo_mensural} style suits
well for e.g. the incipit of a transcribed mensural piece of music.
-The @code{mensural} style finally mimicks the appearance of rests as
+The @code{mensural} style finally mimics the appearance of rests as
in historic prints of the 16th century.
The following example demonstrates the @code{neo_mensural} style:
-@lilypond[fragment,singleline,verbatim]
- \property Voice.Rest \set #'style = #'neo_mensural
+@lilypond[fragment,raggedright,verbatim]
+ \override Rest #'style = #'neo_mensural
r\longa r\breve r1 r2 r4 r8 r16
@end lilypond
modern style mensural C clef @tab
@code{neo_mensural_c1}, @code{neo_mensural_c2},
@code{neo_mensural_c3}, @code{neo_mensural_c4} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "neo_mensural_c2" c
@end lilypond
@code{clefs-petrucci_c5}
@tab
-petrucci style mensural C clefs, for use on different stafflines
-(the examples shows the 2nd staffline C clef).
+petrucci style mensural C clefs, for use on different staff lines
+(the examples shows the 2nd staff line C clef).
@tab
@code{petrucci_c1}
@code{petrucci_c5}
@tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "petrucci_c2" c
@end lilypond
@code{clefs-petrucci_f} @tab
petrucci style mensural F clef @tab
@code{petrucci_f} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "petrucci_f" c
@end lilypond
@code{clefs-petrucci_g} @tab
petrucci style mensural G clef @tab
@code{petrucci_g} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "petrucci_g" c
@end lilypond
historic style mensural C clef @tab
@code{mensural_c1}, @code{mensural_c2}, @code{mensural_c3},
@code{mensural_c4} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "mensural_c2" c
@end lilypond
@code{clefs-mensural_f} @tab
historic style mensural F clef @tab
@code{mensural_f} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "mensural_f" c
@end lilypond
@code{clefs-mensural_g} @tab
historic style mensural G clef @tab
@code{mensural_g} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "mensural_g" c
@end lilypond
@code{clefs-vaticana_do} @tab
Editio Vaticana style do clef @tab
@code{vaticana_do1}, @code{vaticana_do2}, @code{vaticana_do3} @tab
-@lilypond[relative 0, notime]
- \property Staff.StaffSymbol \set #'line-count = #4
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+ \override Staff.StaffSymbol #'line-count = #4
+\override Staff.TimeSignature #'transparent = ##t
\clef "vaticana_do2" c
@end lilypond
@code{clefs-vaticana_fa} @tab
Editio Vaticana style fa clef @tab
@code{vaticana_fa1}, @code{vaticana_fa2} @tab
-@lilypond[relative 0, notime]
- \property Staff.StaffSymbol \set #'line-count = #4
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+ \override Staff.StaffSymbol #'line-count = #4
+\override Staff.TimeSignature #'transparent = ##t
\clef "vaticana_fa2" c
@end lilypond
@code{clefs-medicaea_do} @tab
Editio Medicaea style do clef @tab
@code{medicaea_do1}, @code{medicaea_do2}, @code{medicaea_do3} @tab
-@lilypond[relative 0, notime]
- \property Staff.StaffSymbol \set #'line-count = #4
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+ \override Staff.StaffSymbol #'line-count = #4
+\override Staff.TimeSignature #'transparent = ##t
\clef "medicaea_do2" c
@end lilypond
@code{clefs-medicaea_fa} @tab
Editio Medicaea style fa clef @tab
@code{medicaea_fa1}, @code{medicaea_fa2} @tab
-@lilypond[relative 0, notime]
- \property Staff.StaffSymbol \set #'line-count = #4
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+ \override Staff.StaffSymbol #'line-count = #4
+\override Staff.TimeSignature #'transparent = ##t
\clef "medicaea_fa2" c
@end lilypond
@code{clefs-hufnagel_do} @tab
historic style hufnagel do clef @tab
@code{hufnagel_do1}, @code{hufnagel_do2}, @code{hufnagel_do3} @tab
-@lilypond[relative 0, notime]
- \property Staff.StaffSymbol \set #'line-count = #4
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+ \override Staff.StaffSymbol #'line-count = #4
+\override Staff.TimeSignature #'transparent = ##t
\clef "hufnagel_do2" c
@end lilypond
@code{clefs-hufnagel_fa} @tab
historic style hufnagel fa clef @tab
@code{hufnagel_fa1}, @code{hufnagel_fa2} @tab
-@lilypond[relative 0, notime]
- \property Staff.StaffSymbol \set #'line-count = #4
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+ \override Staff.StaffSymbol #'line-count = #4
+\override Staff.TimeSignature #'transparent = ##t
\clef "hufnagel_fa2" c
@end lilypond
@code{clefs-hufnagel_do_fa} @tab
historic style hufnagel combined do/fa clef @tab
@code{hufnagel_do_fa} @tab
-@lilypond[relative 0, notime]
-\property Staff.TimeSignature \set #'transparent = ##t
+@lilypond[relative,notime]
+\override Staff.TimeSignature #'transparent = ##t
\clef "hufnagel_do_fa" c
@end lilypond
@c Supported clefs:
@c @code{percussion}
@c
-@c @lilypond{\property Staff.TimeSignature \set #'transparent = ##t \clef "percussion" c'}
+@c @lilypond{\override Staff.TimeSignature #'transparent = ##t \clef "percussion" c'}
@c
@c @item modern style tab clef (glyph: @code{clefs-tab})
@c
@c Supported clefs:
@c @code{tab}
@c
-@c @lilypond{\context Staff \outputproperty #(make-type-checker 'staff-symbol-interface) #'line-count = #6 \property Staff.TimeSignature \set #'transparent = ##t \clef "tab" c'}
+@c @lilypond{\context Staff \outputproperty #(make-type-checker 'staff-symbol-interface) #'line-count = #6 \override Staff.TimeSignature #'transparent = ##t \clef "tab" c'}
@emph{Modern style} means ``as is typeset in contemporary editions of
transcribed mensural music''.
@emph{Editio XXX style} means ``as is/was printed in Editio XXX''.
Petrucci used C clefs with differently balanced left-side vertical
-beams, depending on which staffline it is printed.
+beams, depending on which staff line it is printed.
@seealso
Internals: for modern clefs, see @ref{Clef}.
+@refbugs
+
+The mensural g clef is temporarily mapped to the Petrucci g clef,
+until a new mensural g clef will have been implemented.
+
@node Ancient flags
select ancient flags. Besides the @code{default} flag style,
only @code{mensural} style is supported:
-@lilypond[fragment,singleline,verbatim]
- \property Voice.Stem \set #'flag-style = #'mensural
- \property Voice.Stem \set #'thickness = #1.0
- \property Voice.NoteHead \set #'style = #'mensural
+@lilypond[fragment,raggedright,verbatim]
+ \override Stem #'flag-style = #'mensural
+ \override Stem #'thickness = #1.0
+ \override NoteHead #'style = #'mensural
\autoBeamOff
c'8 d'8 e'8 f'8 c'16 d'16 e'16 f'16 c'32 d'32 e'32 f'32 s8
c''8 d''8 e''8 f''8 c''16 d''16 e''16 f''16 c''32 d''32 e''32 f''32
Note that the innermost flare of each mensural flag always is
vertically aligned with a staff line. If you do not like this
-behaviour, you can set the @code{adjust-if-on-staffline} property of
+behavior, you can set the @code{adjust-if-on-staffline} property of
grob @internalsref{Stem} to @code{##f}. Then, the vertical position
of the end of each flare is different between notes on staff lines and
notes between staff lines:
-@lilypond[fragment,singleline]
- \property Voice.Stem \set #'flag-style = #'mensural
- \property Voice.Stem \set #'thickness = #1.0
- \property Voice.Stem \set #'adjust-if-on-staffline = ##f
- \property Voice.NoteHead \set #'style = #'mensural
+@lilypond[fragment,raggedright]
+ \override Stem #'flag-style = #'mensural
+ \override Stem #'thickness = #1.0
+ \override Stem #'adjust-if-on-staffline = ##f
+ \override NoteHead #'style = #'mensural
\autoBeamOff
c'8 d'8 e'8 f'8 c'16 d'16 e'16 f'16 c'32 d'32 e'32 f'32 s8
c''8 d''8 e''8 f''8 c''16 d''16 e''16 f''16 c''32 d''32 e''32 f''32
@end lilypond
There is no particular flag style for neo-mensural notation. Hence,
-when typesetting e.g. the incipit of a transcibed piece of mensural
+when typesetting e.g. the incipit of a transcribed piece of mensural
music, the default flag style should be used. There are no flags in
Gregorian Chant notation.
@lilypond
\score {
\notes {
- \property Score.timing = ##f
- \property Score.barAlways = ##t
+ \set Score.timing = ##f
+ \set Score.barAlways = ##t
s_\markup { "$\\backslash$time 4/4" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural4/4" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural4/4" }
s
s_\markup { "$\\backslash$time 2/2" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural2/2" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural2/2" }
s
s_\markup { "$\\backslash$time 6/4" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural6/4" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural6/4" }
s
s_\markup { "$\\backslash$time 6/8" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural6/8" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural6/8" }
\break
s_\markup { "$\\backslash$time 3/2" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural3/2" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural3/2" }
s
s_\markup { "$\\backslash$time 3/4" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural3/4" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural3/4" }
s
s_\markup { "$\\backslash$time 9/4" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural9/4" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural9/4" }
s
s_\markup { "$\\backslash$time 9/8" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural9/8" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural9/8" }
\break
s_\markup { "$\\backslash$time 4/8" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural4/8" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural4/8" }
s
s_\markup { "$\\backslash$time 2/4" }
- ^\markup { " " \musicglyph #"timesig-neo\_mensural2/4" }
+ ^\markup { " " \musicglyph #"timesig-neo_mensural2/4" }
\break
}
\paper {
@code{neo_mensural} and @code{mensural}. The above table uses the
@code{neo_mensural} style. This style is appropriate e.g. for the
incipit of transcriptions of mensural pieces. The @code{mensural}
-style mimicks the look of historical printings of the 16th century.
+style mimics the look of historical printings of the 16th century.
@inputfileref{input/test,time.ly} gives an overview over all available
ancient and modern styles.
@cindex custos
@cindex custodes
-A @emph{custos} (plural: @emph{custodes}; latin word for `guard') is a
+A @emph{custos} (plural: @emph{custodes}; Latin word for `guard') is a
symbol that appears at the end of a staff. It anticipates the pitch
of the first note(s) of the following line and thus helps the player
or singer to manage line breaks during performance, thus enhancing
century. Nowadays, they have survived only in a few particular forms
of musical notation such as contemporary editions of Gregorian chant
like the @emph{editio vaticana}. There are different custos glyphs
-used in different flavours of notational style.
+used in different flavors of notational style.
@syntax
\score {
\notes {
a'1
- \property Staff.Custos \set #'style = #'mensural
+ \override Staff.Custos #'style = #'mensural
\break
g'
}
If the boolean property @code{adjust-if-on-staffline} is set to
@code{#t} (which it is by default), lily typesets slightly different
variants of the custos glyph, depending on whether the custos, is
-typeset on or between stafflines. The glyph will
+typeset on or between staff lines. The glyph will
optically fit well into the staff, with the appendage on the right of
the custos always ending at the same vertical position between two
-stafflines regardless of the pitch. If you set
+staff lines regardless of the pitch. If you set
@code{adjust-if-on-staffline} to @code{#f}, then
a compromise between both forms is used.
-Just like stems can be attached to noteheads in two directions
+Just like stems can be attached to note heads in two directions
@emph{up} and @emph{down}, each custos glyph is available with its
appendage pointing either up or down. If the pitch of a custos is
above a selectable position, the appendage will point downwards; if
@seealso
-Internals: @internalsref{Custos}
+Internals: @internalsref{Custos}.
Examples: @inputfileref{input/regression,custos.ly}.
@cindex divisiones
@cindex finalis
-A @emph{divisio} (plural: @emph{divisiones}; latin word for
+A @emph{divisio} (plural: @emph{divisiones}; Latin word for
`division') is a staff context symbol that is used to structure
Gregorian music into phrases and sections. The musical meaning of
@emph{divisio minima}, @emph{divisio maior} and @emph{divisio maxima}
Therefore, @code{gregorian-init.ly} also defines @code{\virgula} and
@code{\caesura}:
-@lilypondfile[notexidoc]{divisiones.ly}
+@lilypondfile[]{divisiones.ly}
@refcommands
In this manual: @ref{Breath marks}.
-Internals: @internalsref{BreathingSign}, @internalsref{BreathingSignEvent},
+Internals: @internalsref{BreathingSign}, @internalsref{BreathingSignEvent}.
-Examples: @inputfileref{input/test,divisiones.ly}
+Examples: @inputfileref{input/test,divisiones.ly}.
@node Ligatures
@subsection Ligatures
In musical terminology, a ligature is a coherent graphical symbol that
represents at least two distinct notes. Ligatures originally appeared
in the manuscripts of Gregorian chant notation roughly since the 9th
-century as an allusion to the accent symbols of greek lyric poetry to
+century as an allusion to the accent symbols of Greek lyric poetry to
denote ascending or descending sequences of notes. Both, the shape
and the exact meaning of ligatures changed tremendously during the
following centuries: In early notation, ligatures were used for
By default, the @internalsref{LigatureBracket} engraver just puts a
square bracket above the ligature:
-@lilypond[singleline,verbatim]
+@lilypond[raggedright,verbatim]
\score {
\notes \transpose c c' {
\[ g c a f d' \]
For example,
@example
- \property Score.timing = ##f
- \property Score.defaultBarType = "empty"
- \property Voice.NoteHead \set #'style = #'neo_mensural
- \property Staff.TimeSignature \set #'style = #'neo_mensural
+ \set Score.timing = ##f
+ \set Score.defaultBarType = "empty"
+ \override NoteHead #'style = #'neo_mensural
+ \override Staff.TimeSignature #'style = #'neo_mensural
\clef "petrucci_g"
\[ g\longa c\breve a\breve f\breve d'\longa \]
s4
\[ e1 f1 a\breve g\longa \]
@end example
-@lilypond[singleline]
+@lilypond[raggedright]
\score {
\notes \transpose c c' {
- \property Score.timing = ##f
- \property Score.defaultBarType = "empty"
- \property Voice.NoteHead \set #'style = #'neo_mensural
- \property Staff.TimeSignature \set #'style = #'neo_mensural
+ \set Score.timing = ##f
+ \set Score.defaultBarType = "empty"
+ \override NoteHead #'style = #'neo_mensural
+ \override Staff.TimeSignature #'style = #'neo_mensural
\clef "petrucci_g"
\[ g\longa c\breve a\breve f\breve d'\longa \]
s4
@internalsref{Mensural_ligature_engraver}, the same music transcribes
to the following:
-@lilypond[singleline]
+@lilypond[raggedright]
\score {
\notes \transpose c c' {
- \property Score.timing = ##f
- \property Score.defaultBarType = "empty"
- \property Voice.NoteHead \set #'style = #'neo_mensural
- \property Staff.TimeSignature \set #'style = #'neo_mensural
+ \set Score.timing = ##f
+ \set Score.defaultBarType = "empty"
+ \override NoteHead #'style = #'neo_mensural
+ \override Staff.TimeSignature #'style = #'neo_mensural
\clef "petrucci_g"
\[ g\longa c\breve a\breve f\breve d'\longa \]
s4
@item
@code{1. Punctum}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.5cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.5\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=2.5cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=2.5\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{2. Virga}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{3. Apostropha vel Stropha}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{4. Oriscus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{5. Clivis vel Flexa}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=2.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=2.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{6. Podatus vel Pes}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=2.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=2.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{7. Pes Quassus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{8. Quilisma Pes}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{9. Podatus Initio Debilis}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{10. Torculus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{11. Torculus Initio Debilis}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{12. Porrectus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{13. Climacus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{14. Scandicus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{15. Salicus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@end lilypond
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@item
@code{16. Trigonus}
@tab
-@lilypond[noindent, 26pt, nofragment, linewidth=1.0cm]
+@lilypond[noindent,staffsize=26,nofragment,linewidth=1.0\cm]
\include "gregorian-init.ly"
\score {
\notes \transpose c c' {
\StaffContext
\remove "Clef_engraver"
\remove "Key_engraver"
- StaffSymbol \set #'transparent = ##t
+ \override StaffSymbol #'transparent = ##t
\remove "Time_signature_engraver"
\remove "Bar_engraver"
minimumVerticalExtent = ##f
\VoiceContext
\remove Ligature_bracket_engraver
\consists Vaticana_ligature_engraver
- NoteHead \set #'style = #'vaticana_punctum
- Stem \set #'transparent = ##t
+ \override NoteHead #'style = #'vaticana_punctum
+ \override Stem #'transparent = ##t
}
}
}
@lilypond[raggedright,verbatim,noindent]
\include "gregorian-init.ly"
\score {
- \addlyrics
- \context VaticanaVoice {
- \property Score.BarNumber \set #'transparent = ##t
+<<
+ \context VaticanaVoice = "cantus" {
+ \override Score.BarNumber #'transparent = ##t
\notes {
- \[ c'( c' \flexa a \] \[ a \flexa \deminutum g) \] f \divisioMinima
- \[ f( \pes a c' c' \pes d') \] c' \divisioMinima \break
- \[ c'( c' \flexa a \] \[ a \flexa \deminutum g) \] f \divisioMinima
+ \[ c'\melisma c' \flexa a \] \[ a \flexa \deminutum g\melismaEnd \] f \divisioMinima
+ \[ f\melisma \pes a c' c' \pes d'\melismaEnd \] c' \divisioMinima \break
+ \[ c'\melisma c' \flexa a \] \[ a \flexa \deminutum g\melismaEnd \] f \divisioMinima
}
}
- \context Lyrics \lyrics {
+ \lyricsto "cantus" \new Lyrics \lyrics {
San- ctus, San- ctus, San- ctus
- }
+ } >>
+
}
@end lilypond
In musical terminology, a @emph{cluster} denotes a range of
simultaneously sounding pitches that may change over time. The set of
-available pitches to apply usually depends on the accoustic source.
-Thus, in piano music, a cluster typically consists of a continous range
+available pitches to apply usually depends on the acoustic source.
+Thus, in piano music, a cluster typically consists of a continuous range
of the semitones as provided by the piano's fixed set of a chromatic
scale. In choral music, each singer of the choir typically may sing an
arbitrary pitch within the cluster's range that is not bound to any
diatonic, chromatic or other scale. In electronic music, a cluster
(theoretically) may even cover a continuous range of pitches, thus
-resulting in coloured noise, such as pink noise.
+resulting in colored noise, such as pink noise.
Clusters can be denoted in the context of ordinary staff notation by
engraving simple geometrical shapes that replace ordinary notation of
the note symbol. In contrast, the shape of a cluster geometrically
describes the development of a range of pitches (vertical extent) over
time (horizontal extent). Still, the geometrical shape of a cluster
-covers the area in wich any single pitch contained in the cluster would
+covers the area in which any single pitch contained in the cluster would
be notated as an ordinary note. From this point of view, it is
reasonable to specify a cluster as the envelope of a set of notes.
cluster-notes. Cluster notes are created by applying the function
@code{notes-to-clusters} to a sequence of chords, e.g.
@c
-@lilypond[relative 1,verbatim]
+@lilypond[relative=1,verbatim]
\apply #notes-to-clusters { <c e > <b f'> }
@end lilypond
@inputfileref{input/regression,cluster.ly}) shows what the result
looks like:
-@lilypondfile[notexidoc]{cluster.ly}
+@lilypondfile[]{cluster.ly}
By default, @internalsref{Cluster_spanner_engraver} is in the
@internalsref{Voice} context. This allows putting ordinary notes and
The following are supported
-@lilypond[singleline]
+@lilypond[raggedright]
\score {
<< \addlyrics \notes {
b'
See @ref{Articulations} for general instructions how to apply scripts
such as fermatas to a @code{\notes@{@}} block.
-@node Tuning output
-@section Tuning output
-
-There are situations where default layout decisions are not
-sufficient. In this section we discuss ways to override these
-defaults.
-
-Formatting is internally done by manipulating so called objects
-(graphic objects). Each object carries with it a set of properties
-(object or layout properties) specific to that object. For example, a
-stem object has properties that specify its direction, length and
-thickness.
-
-The most direct way of tuning the output is by altering the values of
-these properties. There are two ways of doing that: first, you can
-temporarily change the definition of one type of object, thus
-affecting a whole set of objects. Second, you can select one specific
-object, and set a layout property in that object.
-
-Do not confuse layout properties with translation
-properties. Translation properties always use a mixed caps style
-naming, and are manipulated using @code{\property}:
-@example
- \property Context.propertyName = @var{value}
-@end example
-Layout properties are use Scheme style variable naming, i.e. lower
-case words separated with dashes. They are symbols, and should always
-be quoted using @code{#'}. For example, this could be an imaginary
-layout property name:
-@example
- #'layout-property-name
-@end example
-
-@menu
-* Tuning objects::
-* Constructing a tweak::
-* Applyoutput::
-* Font selection::
-* Text markup::
-@end menu
-
-
-
-@node Tuning objects
-@subsection Tuning objects
-
-@cindex object description
-
-The definition of an object is a list of default object
-properties. For example, the definition of the Stem object (available
-in @file{scm/define-grobs.scm}), includes the following definitions
-for @internalsref{Stem}:
-
-@example
- (thickness . 1.3)
- (beamed-lengths . (0.0 2.5 2.0 1.5))
- (Y-extent-callback . ,Stem::height)
- @var{...}
-@end example
-
-
-Adding variables on top of this existing definition overrides the
-system default, and alters the resulting appearance of the layout
-object.
-
-@syntax
-
-
-Changing a variable for only one object is commonly achieved with
-@code{\once}:
-
-@example
-\once \property @var{context}.@var{objectname}
- \override @var{symbol} = @var{value}
-@end example
-Here @var{symbol} is a Scheme expression of symbol type, @var{context}
-and @var{objectname} is a string and @var{value} is a Scheme expression.
-This command applies a setting only during one moment in the score.
-
-In the following example, only one @internalsref{Stem} object is
-changed from its original setting:
-
-@lilypond[verbatim, fragment, relative=1]
- c4
- \once \property Voice.Stem \set #'thickness = #4
- c4
- c4
-@end lilypond
-@cindex @code{\once}
-
-For changing more objects, the same command, without @code{\once} can
-be used:
-@example
-\property @var{context}.@var{objectname} \override @var{symbol} = @var{value}
-@end example
-This command adds @code{@var{symbol} = @var{value}} to the definition
-of @var{objectname} in the context @var{context}, and this definition
-stays in place until it is removed.
-
-An existing definition may be removed by the following command:
-@c
-@example
-\property @var{context}.@var{objectname} \revert @var{symbol}
-@end example
-@c
-All @code{\override} and @code{\revert} commands should be balanced.
-The @code{\set} shorthand performs a revert followed by an override,
-and is often more convenient to use
-
-@example
-\property @var{context}.@var{objectname} \set @var{symbol} = @var{value}
-@end example
-
-Some examples:
-@lilypond[verbatim,quote]
-c'4 \property Voice.Stem \override #'thickness = #4.0
-c'4
-c'4 \property Voice.Stem \revert #'thickness
-c'4
-@end lilypond
-
-The following example gives exactly the same result as the previous
-one (assuming the system default for stem thickness is 1.3):
-@c
-@lilypond[verbatim,quote]
- c'4 \property Voice.Stem \set #'thickness = #4.0
- c'4
- c'4 \property Voice.Stem \set #'thickness = #1.3
- c'4
-@end lilypond
-
-Reverting a setting which was not set in the first place has no
-effect. However, if the setting was set as a system default, this may
-remove the default value, and this may give surprising results,
-including crashes. In other words, @code{\override} and
-@code{\revert} must be carefully balanced. The following are examples
-of correct nesting of @code{\override}, @code{\set}, @code{\revert}:
-
-@itemize @bullet
-@item
-a clumsy but correct form:
-@example
- \override \revert \override \revert \override \revert
-@end example
-
-@item
-shorter version of the same:
-@example
- \override \set \set \revert
-@end example
-
-@item
-a short form, using only @code{\set}. This requires you to know the
-default value:
-@example
- \set \set \set \set @var{to default value}
-@end example
-
-@item
-if there is no default (i.e. by default, the object property is unset),
-then you can use
-@example
- \set \set \set \revert
-@end example
-@end itemize
-
-The object description is an Scheme association list. Since a Scheme
-list is a singly linked list, we can treat it as a stack, and
-@code{\override} and @code{\revert} are push and pop operations. The
-association list is stored in a normal context property, hence
-@example
- \property Voice.NoteHead = #'()
-@end example
-will effectively erase @internalsref{NoteHead}s from the current
-@internalsref{Voice}. Typically, this will blank the object. However,
-this mechanism should not be used: it may cause crashes or other
-anomalous behavior.
-
-@seealso
-
-Internals: @internalsref{OverrideProperty}, @internalsref{RevertProperty},
-@internalsref{PropertySet}, @internalsref{All-backend-properties}, and
-@internalsref{All-layout-objects}.
-
-
-@refbugs
-
-The backend is not very strict in type-checking object properties.
-Cyclic references in Scheme values for properties cause hangs and/or
-crashes. Reverting properties that are system defaults may also lead
-to crashes.
-
-A property tweak of modifies a local copy of the object definition.
-After such a tweak, the definition is independent of the objects in
-enclosing contexts. For example
-
-@lilypond
- \property Voice.Stem \set #'neutral-direction = #1
- b'8
- \property Staff.Stem \set #'thickness = #4.0
- b'16
- \new Voice { b'32 }
-@end lilypond
-
-In this fragment, @code{neutral-direction} is tweaked. As a result,
-the current @internalsref{Voice} gets a private version of the
-@internalsref{Stem} object. The following tweak modifies the
-definition at @internalsref{Staff} level. Since it a different
-definition, the thickness of the @code{b'16} is unaffected. For the
-third note, a new Voice is created, which inherits the new definition,
-including the changed thickness, but excluding the new neutral
-direction.
-
+@node Special notation
+@section Special notation
@menu
-* Constructing a tweak::
-* Applyoutput::
-* Font selection::
-* Text markup::
+* Balloon help::
+* Easy Notation note heads::
@end menu
-@node Constructing a tweak
-@subsection Constructing a tweak
-
-
-@cindex internal documentation
-@cindex finding graphical objects
-@cindex graphical object descriptions
-@cindex tweaking
-@cindex @code{\override}
-@cindex @code{\set}
-@cindex internal documentation
-
-
-
-Three pieces of information are required to use @code{\override} and
-@code{\set}: the name of the layout object, the context and the name
-of the property. We demonstrate how to glean this information from
-the notation manual and the generated documentation.
+@node Balloon help
+@subsection Balloon help
-The generated documentation is a set of HTML pages which should be
-included if you installed a binary distribution, typically in
-@file{/usr/share/doc/lilypond}. They are also available on the web:
-go to the @uref{http://lilypond.org,LilyPond website}, click
-``Documentation'', select the correct version, and click then
-``Program reference.'' It is advisable to bookmark the local HTML
-files. They will load faster than the ones on the web. If you use the
-version from the web, you must check whether the documentation matches
-the program version: it is generated from the definitions that the
-program uses, and therefore it is strongly tied to the LilyPond
-version.
+Elements of notation can be marked and named with the help of a square
+balloon. The primary purpose of this feature is to explain notation.
+The following example demonstrates its use.
-@c [TODO: revise for new site.]
-
-Suppose we want to move the fingering indication in the fragment below:
-
-@lilypond[relative=2,verbatim]
-c-2
-\stemUp
-f
+@lilypond[verbatim,fragment,raggedright,relative=1]
+ \context Voice
+ \applyoutput
+ #(add-balloon-text 'NoteHead "heads, or tails?"
+ '(1 . -3))
+ c8
@end lilypond
-If you visit the documentation of @code{Fingering} (in @ref{Fingering
-instructions}), you will notice that there is written:
-
-@quotation
-@seealso
-
-Internals: @internalsref{FingerEvent} and @internalsref{Fingering}.
-
-@end quotation
-
-@separate
-
-@noindent
-In other words, the fingerings once entered, are internally stored as
-@code{FingerEvent} music objects. When printed, a @code{Fingering}
-layout object is created for every @code{FingerEvent}.
-
-The Fingering object has a number of different functions, and each of
-those is captured in an interface. The interfaces are listed under
-@internalsref{Fingering} in the program reference.
-
-
-
-The @code{Fingering} object has a fixed size
-(@internalsref{item-interface}), the symbol is a piece of text
-(@internalsref{text-interface}), whose font can be set
-(@internalsref{font-interface}). It is centered horizontally
-(@internalsref{self-alignment-interface}), it is placed next to other
-objects (@internalsref{side-position-interface}) vertically, and its
-placement is coordinated with other scripts
-(@internalsref{text-script-interface}). It also has the standard
-@internalsref{grob-interface} (grob stands for Graphical object)
-@cindex grob
-@cindex graphical object
-@cindex layout object
-@cindex object, layout
-with all the variables that come with
-it. Finally, it denotes a fingering instruction, so it has
-@internalsref{finger-interface}.
-
-For the vertical placement, we have to look under
-@code{side-position-interface}:
-@quotation
-@code{side-position-interface}
-
- Position a victim object (this one) next to other objects (the
- support). In this case, the property @code{direction} signifies where to put the
- victim object relative to the support (left or right, up or down?)
-@end quotation
-
-@cindex padding
@noindent
-below this description, the variable @code{padding} is described as
-@quotation
-@table @code
-@item padding
- (dimension, in staff space)
-
- add this much extra space between objects that are next to each
-other. Default value: @code{0.6}
-@end table
-@end quotation
-
-By increasing the value of @code{padding}, we can move away the
-fingering. The following command inserts 3 staff spaces of white
-between the note and the fingering:
-@example
-\once \property Voice.Fingering \set #'padding = #3
-@end example
-
-Inserting this command before the Fingering object is created,
-i.e. before @code{c2}, yields the following result:
-
-@lilypond[relative=2,fragment,verbatim]
-\once \property Voice.Fingering
- \set #'padding = #3
-c-2
-\stemUp
-f
-@end lilypond
-
-The context name @code{Voice} in the example above can be determined
-as follows. In the documentation for @internalsref{Fingering}, it says
-@quotation
-Fingering grobs are created by: @internalsref{Fingering_engraver}
-@end quotation
-
-Clicking @code{Fingering_engraver} shows the documentation of
-the module responsible for interpreting the fingering instructions and
-translating them to a @code{Fingering} object. Such a module is called
-an @emph{engraver}. The documentation of the @code{Fingering_engraver}
-says
-@example
-Fingering_engraver is part of contexts: Voice
-@end example
-so tuning the settings for Fingering should be done with
-@example
- \property Voice.Fingering \set @dots{}
-@end example
-
-Of course, the tweak may also done in a larger context than
-@code{Voice}, for example, @internalsref{Staff} or
-@internalsref{Score}.
-
-@seealso
-
-Internals: the program reference also contains alphabetical lists of
-@internalsref{Contexts}, @internalsref{All-layout-objects} and
-@internalsref{Music-expressions}, so you can also find which objects
-to tweak by browsing the internals document.
-
-
-@node Applyoutput
-@subsection Applyoutput
-
-The most versatile way of tuning an object is @code{\applyoutput}. Its
-syntax is
-@example
-\applyoutput @var{proc}
-@end example
-
-@noindent
-where @var{proc} is a Scheme function, taking three arguments.
-
-When interpreted, the function @var{proc} is called for every layout
-object found in the context, with the following arguments:
-@itemize @bullet
-@item the layout object itself,
-@item the context where the layout object was created, and
-@item the context where @code{\applyoutput} is processed.
-@end itemize
-
-
-In addition, the cause of the layout object, i.e. the music
-expression or object that was responsible for creating it, is in the
-object property @code{cause}. For example, for a note head, this is a
-@internalsref{NoteHead} event, and for a @internalsref{Stem} object,
-this is a @internalsref{NoteHead} object.
-
-Here is a simple example of @code{\applyoutput}; it blanks note-heads on the
-center-line:
-@example
-(define (blanker grob grob-origin context)
- (if (and (memq (ly:get-grob-property grob 'interfaces)
- note-head-interface)
- (eq? (ly:get-grob-property grob 'staff-position) 0))
-
- (ly:set-grob-property! grob 'transparent #t)))
-@end example
-
-
-
-@node Font selection
-@subsection Font selection
-
-The most common thing to change about the appearance of fonts is their
-size. The font size of any context can be easily changed by setting
-the @code{fontSize} property for that context. Its value is a number:
-negative numbers make the font smaller, positive numbers larger. An
-example is given below:
-@c
-@lilypond[fragment,relative=1,verbatim,quote]
- c4 c4 \property Voice.fontSize = #-1
- f4 g4
-@end lilypond
-This command will set @code{font-size} (see below), and does
-not change the size of variable symbols, such as beams or slurs.
-
-One of the uses of @code{fontSize} is to get smaller symbols for cue
-notes. An elaborate example of those is in
-@inputfileref{input/test,cue-notes.ly}.
-
-@cindex magnification
-@cindex cue notes
-
-The font used for printing a object can be selected by setting
-@code{font-name}, e.g.
-@example
- \property Staff.TimeSignature
- \set #'font-name = #"cmr17"
-@end example
-
-@noindent
-Any font can be used, as long as it is available to @TeX{}. Possible
-fonts include foreign fonts or fonts that do not belong to the
-Computer Modern font family. The size of fonts selected in this way
-can be changed with the @code{font-magnification} property. For
-example, @code{2.0} blows up all letters by a factor 2 in both
-directions.
-
-@cindex font size
-@cindex font magnification
-
-Font selection for the standard fonts, @TeX{}'s Computer Modern fonts,
-can also be adjusted with a more fine-grained mechanism. By setting
-the object properties described below, you can select a different font;
-all three mechanisms work for every object that supports
-@code{font-interface}:
-
-
-@table @code
-@item font-family
- is a symbol indicating the general class of the typeface. Supported are
-@code{roman} (Computer Modern), @code{braces} (for piano staff
-braces), @code{music} (the standard music font, including ancient
-glyphs), @code{dynamic} (for dynamic signs) and @code{typewriter}.
-
-@item font-shape
- is a symbol indicating the shape of the font, there are typically several
- font shapes available for each font family. Choices are @code{italic},
- @code{caps} and @code{upright}.
-
-@item font-series
-is a symbol indicating the series of the font. There are typically several
-font series for each font family and shape. Choices are @code{medium}
-and @code{bold}.
-
-@end table
-
-For any of these properties, the value @code{*} (i.e. the symbol
-@code{*}, entered as @code{#'*}), acts as a wildcard. This can be used
-to override default setting, which are always present. For example:
-@example
- \property Lyrics . LyricText \override #'font-series = #'bold
- \property Lyrics . LyricText \override #'font-family = #'typewriter
- \property Lyrics . LyricText \override #'font-shape = #'*
-@end example
-
-@cindex @code{font-style}
-
-The font size is set by modifying the @code{font-size} property. Its
-value is a number indicating the size relative to the standard size.
-Each step up is an increase of approximately 12% of the font size. Six
-steps is exactly a factor two. The Scheme function @code{magstep}
-converts a @code{font-size} number to a scaling factor.
-
-LilyPond has fonts in different design sizes: the music fonts for
-smaller sizes are chubbier, while the text fonts are relatively wider.
-Font size changes are achieved by scaling the design size that is
-closest to the desired size.
-
-The @code{font-size} mechanism does not work for fonts selected
-through @code{font-name}. These may be scaled with
-@code{font-magnification}.
-
-@refcommands
-
-The following commands set @code{fontSize} for the current voice.
-
-@cindex @code{\tiny}
-@code{\tiny},
-@cindex @code{\small}
-@code{\small},
-@cindex @code{\normalsize}
-@code{\normalsize},
-
-@seealso
-
-Init files: @file{ly/paper20.ly} contains hints how new fonts may be
-added to LilyPond.
-
-@refbugs
-
-There is no style sheet provided for other fonts besides the @TeX{}
-family.
-
-@cindex font selection
-@cindex font magnification
-@cindex @code{font-interface}
-
-
-@node Text markup
-@subsection Text markup
-@cindex text markup
-@cindex markup text
-
-
-@cindex typeset text
-
-LilyPond has an internal mechanism to typeset texts. You can access it
-with the keyword @code{\markup}. Within markup mode, you can enter texts
-similar to lyrics: simply enter them, surrounded by spaces:
-@cindex markup
-
-@lilypond[verbatim,fragment,relative=1]
- c1^\markup { hello }
- c1_\markup { hi there }
- c1^\markup { hi \bold there, is \italic anyone home? }
-@end lilypond
-
-@cindex font switching
-
-The markup in the example demonstrates font switching commands. The
-command @code{\bold} and @code{\italic} only apply to the first
-following word; enclose a set of texts with braces to apply a command
-to more words:
-@example
- \markup @{ \bold @{ hi there @} @}
-@end example
-
-@noindent
-For clarity, you can also do this for single arguments, e.g.
-@example
- \markup @{ is \italic @{ anyone @} home @}
-@end example
-
-@cindex font size, texts
-
-The following size commands set absolute sizes:
-
-@cindex @code{\teeny}
-@cindex @code{\tiny}
-@cindex @code{\small}
-@cindex @code{\large}
-@cindex @code{\huge}
-
-@table @code
-@item \teeny
-@item \tiny
-@item \small
-@item \large
-@item \huge
-@end table
-
-You can also make letter larger or smaller relative to their neighbors,
-with the commands @code{\larger} and @code{\smaller}.
-@cindex smaller
-@cindex larger
-
-@cindex font style, for texts
-@cindex @code{\bold}
-@cindex @code{\dynamic}
-@cindex @code{\number}
-@cindex @code{\italic}
-
-The following font change commands are defined:
-@table @code
-@item \dynamic
-changes to the font used in dynamic signs. This font does not
-contain all characters of the alphabet, so when producing ``piu f'',
-the ``piu'' should be done in a different font.
-
-
-@item \number
-changes to the font used in time signatures. It only contains
-numbers and a few punctuation marks.
-@item \italic
-changes @code{font-shape} to @code{italic}.
-@item \bold
-changes @code{font-series} to @code{bold}.
-@end table
-
-@cindex raising text
-@cindex lowering text
-@cindex moving text
-@cindex translating text
-
-@cindex @code{\sub}
-@cindex @code{\super}
-
-Raising and lowering texts can be done with @code{\super} and
-@code{\sub}:
-
-@lilypond[verbatim,fragment,relative=1]
- c1^\markup { E "=" mc \super "2" }
-@end lilypond
-
-@cindex @code{\raise}
-
-If you want to give an explicit amount for lowering or raising, use
-@code{\raise}. This command takes a Scheme valued first argument, and
-a markup object as second argument:
-@c
-@lilypond[verbatim,fragment,relative=1,quote]
- c1^\markup { C \small \raise #1.0 \bold { "9/7+" }}
-@end lilypond
-The argument to @code{\raise} is the vertical displacement amount,
-measured in (global) staff spaces. @code{\raise} and @code{\super}
-raise objects in relation to their surrounding markups. They cannot be
-used to move a single text up or down, when it is above or below a
-note, since the mechanism that positions it next to the note cancels
-any vertical shift. For vertical positioning, use the @code{padding}
-and/or @code{extra-offset} properties.
-
-Other commands taking single arguments include
-@table @code
-
-@item \bracket, \hbracket
- Bracket the argument markup with normal and horizontal brackets
-respectively.
-
-@item \musicglyph
-@cindex @code{\musicglyph}
- This is converted to a musical symbol, e.g. @code{\musicglyph
-#"accidentals-0"} will select the natural sign from the music font.
-See @ref{The Feta font} for a complete listing of the possible glyphs.
-@item \char
-This produces a single character, e.g. @code{\char #65} produces the
-letter 'A'.
-
-@item \note @var{log} @var{dots} @var{dir}
-@cindex @code{\note}
-
-This produces a note with a stem pointing in @var{dir} direction, with
-duration log @var{log} and @var{dots} augmentation dots. The duration
-log is the negative 2-logarithm of the duration denominator. For
-example, a quarter note has log 2, an eighth note 3 and a breve has
-log -1.
-
-@item \hspace #@var{amount}
-@cindex @code{\hspace}
-This produces a invisible object taking horizontal space.
-@example
-\markup @{ A \hspace #2.0 B @}
-@end example
-will put extra space between A and B, on top of the space that is
-normally inserted before elements on a line.
-
-@item \fontsize #@var{size}
-@cindex @code{\fontsize}
-This sets the relative font size, eg.
-@example
-A \fontsize #2 @{ B C @} D
-@end example
-
-
-This will enlarge the B and the C by two steps.
-@item \translate #(cons @var{x} @var{y})
-@cindex \translate
-This translates an object. Its first argument is a cons of numbers
-@example
-A \translate #(cons 2 -3) @{ B C @} D
-@end example
-This moves `B C' 2 spaces to the right, and 3 down, relative to its
-surroundings. This command cannot be used to move isolated scripts
-vertically, for the same reason that @code{\raise} cannot be used for
-that.
-
-@item \magnify #@var{mag}
-@cindex @code{\magnify}
-This sets the font magnification for the its argument. In the following
-example, the middle A will be 10% larger:
-@example
-A \magnify #1.1 @{ A @} A
-@end example
-
-
-@item \override #(@var{key} . @var{value})
-@cindex @code{\override}
-This overrides a formatting property for its argument. The argument
-should be a key/value pair, e.g.
-@example
- m \override #'(font-family . math) m m
-@end example
-@end table
-
-In markup mode you can compose expressions, similar to mathematical
-expressions, XML documents and music expressions. The braces group
-notes into horizontal lines. Other types of lists also exist: you can
-stack expressions grouped with @code{<}, and @code{>} vertically with
-the command @code{\column}. Similarly, @code{\center} aligns texts by
-their center lines:
-
-@lilypond[verbatim,fragment,relative=1]
- c1^\markup { \column < a bbbb c > }
- c1^\markup { \center < a bbbb c > }
- c1^\markup { \line < a b c > }
-@end lilypond
-
-Markups can be stored in variables, and these variables
-may be attached to notes, like
-@verbatim
-allegro = \markup { \bold \large { Allegro } }
-\notes { a^\allegro b c d }
-@end verbatim
-
-The markup mechanism is extensible. Refer to
-@file{scm/new-markup.scm} for more information.
+The function @code{add-balloon-text} takes the name of a grob, the
+label to print and where to put the label relative to the object. In
+the above example, the text ``heads or tails?'' ends 3 spaces below
+the `balloon.'
+@cindex balloon
+@cindex notation, explaining
@seealso
-Internals: @internalsref{Markup-functions},
+Internals: @internalsref{text-balloon-interface}.
-Init files: @file{scm/new-markup.scm}.
-
-@refbugs
+Examples: @inputfileref{input/regression,balloon.ly}.
-@cindex kerning
-
-
-Text layout is ultimately done by @TeX{}, which does kerning of
-letters. LilyPond does not account for kerning, so texts will be
-spaced slightly too wide.
-
-Syntax errors for markup mode are confusing.
-
-Markup texts cannot be used in the titling of the @code{\header}
-field. Titles are made by La@TeX{}, so La@TeX{} commands should be used
-for formatting.
-
-
-
-
-@node Global layout
-@section Global layout
-
-The global layout determined by three factors: the page layout, the
-line breaks and the spacing. These all influence each other. The
-choice of spacing determines how densely each system of music is set,
-which influences where line breaks breaks are chosen, and thus
-ultimately how many pages a piece of music takes. This section
-explains how to tune the algorithm for spacing.
-
-Globally spoken, this procedure happens in three steps: first,
-flexible distances (``springs'') are chosen, based on durations. All
-possible line breaking combination are tried, and the one with the
-best results---a layout that has uniform density and requires as
-little stretching or cramping as possible---is chosen. When the score
-is processed by @TeX{}, each page is filled with systems, and page breaks
-are chosen whenever the page gets full.
-
-
-
-@menu
-* Vertical spacing::
-* Horizontal spacing::
-* Font Size::
-* Line breaking::
-* Page layout::
-@end menu
-
-
-@node Vertical spacing
-@subsection Vertical spacing
-
-@cindex vertical spacing
-@cindex distance between staves
-@cindex staff distance
-@cindex between staves, distance
-@cindex staffs per page
-@cindex space between staves
-
-The height of each system is determined automatically by LilyPond, to
-keep systems from bumping into each other, some minimum distances are
-set. By changing these, you can put staves closer together, and thus
-put more systems onto one page.
-
-Normally staves are stacked vertically. To make
-staves maintain a distance, their vertical size is padded. This is
-done with the property @code{minimumVerticalExtent}. It takes a pair
-of numbers, so if you want to make it smaller from its, then you could
-set
-@example
- \property Staff.minimumVerticalExtent = #'(-4 . 4)
-@end example
-This sets the vertical size of the current staff to 4 staff spaces on
-either side of the center staff line. The argument of
-@code{minimumVerticalExtent} is interpreted as an interval, where the
-center line is the 0, so the first number is generally negative. The
-staff can be made larger at the bottom by setting it to @code{(-6
-. 4)}.
-
-The piano staves are handled a little differently: to make cross-staff
-beaming work correctly, it is necessary that the distance between staves
-is fixed beforehand. This is also done with a
-@internalsref{VerticalAlignment} object, created in
-@internalsref{PianoStaff}. In this object the distance between the
-staves is fixed by setting @code{forced-distance}. If you want to
-override this, use a @code{\translator} block as follows:
-@example
- \translator @{
- \PianoStaffContext
- VerticalAlignment \override #'forced-distance = #9
- @}
-@end example
-This would bring the staves together at a distance of 9 staff spaces,
-measured from the center line of each staff.
+@node Easy Notation note heads
+@subsection Easy Notation note heads
-@seealso
+@cindex easy notation
+@cindex Hal Leonard
-Internals: Vertical alignment of staves is handled by the
-@internalsref{VerticalAlignment} object.
-
-
-
-@node Horizontal spacing
-@subsection Horizontal Spacing
-
-The spacing engine translates differences in durations into
-stretchable distances (``springs'') of differing lengths. Longer
-durations get more space, shorter durations get less. The shortest
-durations get a fixed amount of space (which is controlled by
-@code{shortest-duration-space} in the @internalsref{SpacingSpanner} object).
-/The longer the duration, the more space it gets: doubling a
-duration adds a fixed amount (this amount is controlled by
-@code{spacing-increment}) of space to the note.
-
-For example, the following piece contains lots of half, quarter and
-8th notes, the eighth note is followed by 1 note head width (NHW).
-The quarter note is followed by 2 NHW, the half by 3 NHW, etc.
-@lilypond[fragment, verbatim, relative=1] c2 c4. c8 c4. c8 c4. c8 c8
-c8 c4 c4 c4
-@end lilypond
-
-Normally, @code{shortest-duration-space} is set to 1.2, which is the
-width of a note head, and @code{shortest-duration-space} is set to
-2.0, meaning that the shortest note gets 2 NHW (2 times
-@code{shortest-duration-space}) of space. For normal notes, this space
-is always counted from the left edge of the symbol, so the shortest
-notes are generally followed by one NHW of space.
-
-If one would follow the above procedure exactly, then adding a single
-32th note to a score that uses 8th and 16th notes, would widen up the
-entire score a lot. The shortest note is no longer a 16th, but a 32nd,
-thus adding 1 NHW to every note. To prevent this, the
-shortest duration for spacing is not the shortest note in the score,
-but the most commonly found shortest note. Notes that are even
-shorter this are followed by a space that is proportional to their
-duration relative to the common shortest note. So if we were to add
-only a few 16th notes to the example above, they would be followed by
-half a NHW:
-
-@lilypond[fragment, verbatim, relative=2]
- c2 c4. c8 c4. c16[ c] c4. c8 c8 c8 c4 c4 c4
-@end lilypond
-
-The most common shortest duration is determined as follows: in every
-measure, the shortest duration is determined. The most common short
-duration, is taken as the basis for the spacing, with the stipulation
-that this shortest duration should always be equal to or shorter than
-1/8th note. The shortest duration is printed when you run lilypond
-with @code{--verbose}. These durations may also be customized. If you
-set the @code{common-shortest-duration} in
-@internalsref{SpacingSpanner}, then this sets the base duration for
-spacing. The maximum duration for this base (normally 1/8th), is set
-through @code{base-shortest-duration}.
-
-@cindex @code{common-shortest-duration}
-@cindex @code{base-shortest-duration}
-@cindex @code{stem-spacing-correction}
-@cindex @code{spacing}
-
-In the introduction it was explained that stem directions influence
-spacing. This is controlled with @code{stem-spacing-correction}
-property in @internalsref{NoteSpacing}, which are generated for every
-@internalsref{Voice} context. The @code{StaffSpacing} object
-(generated at @internalsref{Staff} context) contains the same property
-for controlling the stem/barline spacing. The following example
-shows these corrections, once with default settings, and once with
-exaggerated corrections:
+The `easy play' note head includes a note name inside the head. It is
+used in music aimed at beginners:
-@lilypond
- \score { \notes {
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
- \property Staff.NoteSpacing \override #'stem-spacing-correction
- = #1.5
- \property Staff.StaffSpacing \override #'stem-spacing-correction
- = #1.5
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
- }
- \paper { raggedright = ##t } }
+@lilypond[raggedright,verbatim,staffsize=26]
+\score {
+ \notes { c'2 e'4 f' | g'1 }
+ \paper { \translator { \EasyNotation } }
+}
@end lilypond
-@cindex SpacingSpanner, overriding properties
-
-Properties of the @internalsref{SpacingSpanner} must be overridden
-from the @code{\paper} block, since the @internalsref{SpacingSpanner} is
-created before any @code{\property} statements are interpreted.
-@example
-\paper @{ \translator @{
- \ScoreContext
- SpacingSpanner \override #'spacing-increment = #3.0
-@} @}
-@end example
-
-
-@seealso
-
-Internals: @internalsref{SpacingSpanner}, @internalsref{NoteSpacing},
-@internalsref{StaffSpacing}, @internalsref{SeparationItem}, and
-@internalsref{SeparatingGroupSpanner}.
-
-@refbugs
-
-Spacing is determined on a score wide basis. If you have a score that
-changes its character (measured in durations) halfway during the
-score, the part containing the longer durations will be spaced too
-widely.
-
-There is no convenient mechanism to manually override spacing.
-
-
-
-@node Font Size
-@subsection Font size
-@cindex font size, setting
-@cindex staff size, setting
-@cindex @code{paper} file
-
-The Feta font provides musical symbols at seven different sizes.
-These fonts are 11 point, 13 point, 16 point, 20 point, 23 point, and
-26 point. The point size of a font is the height of the corresponding
-staff (excluding line thicknesses).
-
-Definitions for these sizes are the files @file{paperSZ.ly}, where
-@code{SZ} is one of 11, 13, 16, 20, 23 and 26. If you include any
-of these files, the variables @code{paperEleven},
-@code{paperThirteen}, @code{paperSixteen},
-@code{paperTwenty}, @code{paperTwentythree}, and @code{paperTwentysix}
-are defined respectively. The default @code{\paper} block is also
-set. These files should be imported at toplevel, i.e.
-@example
- \include "paper26.ly"
- \score @{ ... @}
-@end example
-
-The default font size settings for each staff heights are generated
-from the 20pt style sheet. For more details, see the file
-@file{scm/font.scm}.
-
-
-@node Line breaking
-@subsection Line breaking
-
-@cindex line breaks
-@cindex breaking lines
-
-Line breaks are normally computed automatically. They are chosen such
-that lines look neither cramped nor loose, and that consecutive lines
-have similar density.
-
-Occasionally you might want to override the automatic breaks; you can
-do this by specifying @code{\break}. This will force a line break at
-this point. Line breaks can only occur at places where there are bar
-lines. If you want to have a line break where there is no bar line,
-you can force an invisible bar line by entering @code{\bar
-""}. Similarly, @code{\noBreak} forbids a line break at a
-point.
+The @code{EasyNotation} variable overrides a @internalsref{Score} @c
+context. To make the letters readable, it has to be printed in a
+large font size. To print with a larger font, see @ref{Font Size}.
+@cindex Xdvi
+@cindex ghostscript
-@cindex regular line breaks
-@cindex four bar music.
-
-For linebreaks at regular intervals use @code{\break} separated by
-skips and repeated with @code{\repeat}:
-@example
-<< \repeat unfold 7 @{ s1 * 4 \break @}
- @emph{the real music}
->>
-@end example
-
-@noindent
-This makes the following 28 measures (assuming 4/4 time) be broken every
-4 measures.
-
-@seealso
-
-Internals: @internalsref{BreakEvent}.
-
-
-@node Page layout
-@subsection Page layout
-
-@cindex page breaks
-@cindex breaking pages
-
-@cindex @code{indent}
-@cindex @code{linewidth}
-
-The most basic settings influencing the spacing are @code{indent} and
-@code{linewidth}. They are set in the @code{\paper} block. They
-control the indentation of the first line of music, and the lengths of
-the lines.
-
-If @code{raggedright} is set to true in the @code{\paper}
-block, then the lines are justified at their natural length. This
-useful for short fragments, and for checking how tight the natural
-spacing is.
-
-@cindex page layout
-@cindex vertical spacing
-
-The page layout process happens outside the LilyPond formatting
-engine: variables controlling page layout are passed to the output,
-and are further interpreted by @code{lilypond} wrapper program. It
-responds to the following variables in the @code{\paper} block. The
-variable @code{textheight} sets the total height of the music on each
-page. The spacing between systems is controlled with
-@code{interscoreline}, its default is 16pt. The distance between the
-score lines will stretch in order to fill the full page
-@code{interscorelinefill} is set to a positive number. In that case
-@code{interscoreline} specifies the minimum spacing.
-
-@cindex @code{textheight}
-@cindex @code{interscoreline}
-@cindex @code{interscorelinefill}
-
-If the variable @code{lastpagefill} is defined,
-@c fixme: this should only be done if lastpagefill == #t
-systems are evenly distributed vertically on the last page. This
-might produce ugly results in case there are not enough systems on the
-last page. The @command{lilypond-book} command ignores
-@code{lastpagefill}. See @ref{lilypond-book manual} for more
-information.
-
-@cindex @code{lastpagefill}
-
-Page breaks are normally computed by @TeX{}, so they are not under
-direct control of LilyPond. However, you can insert a commands into
-the @file{.tex} output to instruct @TeX{} where to break pages. This
-is done by setting the @code{between-systems-strings} on the
-@internalsref{NonMusicalPaperColumn} where the system is broken.
-An example is shown in @inputfileref{input/regression,between-systems.ly}.
-The predefined command @code{\newpage} also does this.
-
-@cindex paper size
-@cindex page size
-@cindex @code{papersize}
-
-To change the paper size, you must first set the @code{papersize} paper
-variable variable as in the example below. Set it to
-the strings @code{a4}, @code{letter}, or @code{legal}. After this
-specification, you must set the font as described above. If you want
-the default font, then use the 20 point font.
-
-@example
- \paper@{ papersize = "a4" @}
- \include "paper16.ly"
-@end example
-
-The file @code{paper16.ly} will now include a file named @file{a4.ly}, which
-will set the paper variables @code{hsize} and @code{vsize} (used by
-@code{lilypond-book} and @code{lilypond}).
-
-
-@refcommands
-
-@cindex @code{\newpage}
-@code{\newpage}.
-
-
-@seealso
-
-In this manual @ref{Invoking lilypond}
-
-Examples: @inputfileref{input/regression,between-systems.ly}
-
-Internals: @internalsref{NonMusicalPaperColumn}.
-
-@refbugs
-
-LilyPond has no concept of page layout, which makes it difficult to
-reliably choose page breaks in longer pieces.
-
-
-
-
-@node Sound
-@section Sound
-@cindex Sound
-
-Entered music can also be converted to MIDI output. The performance
-is good enough for proof-hearing the music for errors.
-
-Ties, dynamics and tempo changes are interpreted. Dynamic marks,
-crescendi and decrescendi translate into MIDI volume levels. Dynamic
-marks translate to a fixed fraction of the available MIDI volume
-range, crescendi and decrescendi make the volume vary linearly between
-their two extremities. The fractions can be adjusted by
-@code{dynamicAbsoluteVolumeFunction} in @internalsref{Voice} context.
-For each type of MIDI instrument, a volume range can be defined. This
-gives a basic equalizer control, which can enhance the quality of
-the MIDI output remarkably. The equalizer can be controlled by
-setting @code{instrumentEqualizer}.
-
-@refbugs
-
-Many musically interesting effects, such as swing, articulation,
-slurring, etc., are not translated to MIDI.
-
-
-@menu
-* MIDI block::
-* MIDI instrument names::
-@end menu
-
-
-@node MIDI block
-@subsection MIDI block
-@cindex MIDI block
-
-
-The MIDI block is analogous to the paper block, but it is somewhat
-simpler. The @code{\midi} block can contain:
-@cindex MIDI block
-
-@itemize @bullet
- @item a @code{\tempo} definition, and
- @item context definitions.
-@end itemize
-
-Assignments in the @code{\midi} block are not allowed.
-
-A number followed by a period is interpreted as a real number, so
-for setting the tempo for dotted notes, an extra space should be
-inserted, for example:
-
-@example
- \midi @{ \tempo 4 . = 120 @}
-@end example
-
-
-@cindex context definition
-
-Context definitions follow precisely the same syntax as within the
-\paper block. Translation modules for sound are called performers.
-The contexts for MIDI output are defined in @file{ly/performer-init.ly}.
-
-
-@node MIDI instrument names
-@subsection MIDI instrument names
-
-@cindex instrument names
-@cindex @code{Staff.midiInstrument}
-
-The MIDI instrument name is set by the @code{Staff.midiInstrument}
-property. The instrument name should be chosen from the list in
-@ref{MIDI instruments}.
-
-@refbugs
-
-If the selected string does not exactly match, then the default is
-used, which is the Grand Piano.
+If you view the result with Xdvi, then staff lines may show through
+the letters. Printing the PostScript file obtained does produce the
+correct result.