]> git.donarmstrong.com Git - lilypond.git/blobdiff - Documentation/user/pitches.itely
Merge branch 'master' of git://git.sv.gnu.org/lilypond
[lilypond.git] / Documentation / user / pitches.itely
index 264946ff47fc368841b5e787c8b85a5157adeef3..e1ad2ca5ca050d626bcbade3ef0ccffa51c0054e 100644 (file)
@@ -6,12 +6,13 @@
     version that you are working on.  See TRANSLATION for details.
 @end ignore
 
+@c \version "2.11.38"
+
 
 @node Pitches
 @section Pitches
 
-@lilypondfile[quote,ragged-right,line-width=16\cm,staffsize=16]
-{pitches-headword.ly}
+@lilypondfile[quote]{pitches-headword.ly}
 
 This section discusses how to specify the pitch of notes.  There
 are three steps to this process: input, modification, and output.
@@ -40,7 +41,7 @@ mode.  In most cases, relative mode will be more convenient.
 
 
 @node Absolute octave entry
-@subsubsection Absolute octave entry
+@unnumberedsubsubsec Absolute octave entry
 
 @cindex pitch names
 @cindex pitches
@@ -51,7 +52,7 @@ A pitch name is specified using lowercase letters@tie{}@code{a}
 through@tie{}@code{g}.  The note names @code{c} to @code{b} are
 engraved in the octave below middle C.
 
-@c NOTE: don't use c' here.
+@c don't use c' here.
 @lilypond[verbatim,quote,ragged-right,fragment]
 \clef bass
 c d e f
@@ -78,13 +79,15 @@ d,, d, d c
 
 @seealso
 
-Music Glossary: @rglos{Pitch names}.
+Music Glossary:
+@rglos{Pitch names}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
 
 @node Relative octave entry
-@subsubsection Relative octave entry
+@unnumberedsubsubsec Relative octave entry
 
 @cindex relative
 @cindex relative octave specification
@@ -103,8 +106,8 @@ octave.
 @end example
 
 In relative mode, each note is assumed to be as close to the
-previous note as possible.  This means that the octave of pitches
-in @var{musicexpr} is calculated as follows:
+previous note as possible.  This means that the octave of each
+pitch inside @var{musicexpr} is calculated as follows:
 
 @itemize
 @item
@@ -163,15 +166,14 @@ large intervals:
 If the preceding item is a chord, the first note of the chord is
 used as the reference point for the octave placement of a
 following note or chord.  Inside chords, the next note is always
-relative to the preceding one.
+relative to the preceding one.  Examine the next example
+carefully, paying attention to the @code{c} notes.
 
 @lilypond[verbatim,quote,ragged-right]
 \relative c' {
   c
   <c e g>
-  % the C is now an octave higher
   <c' e g'>
-  % the C returns to the original pitch
   <c, e, g''>
 }
 @end lilypond
@@ -196,21 +198,33 @@ that each interval contains.
 
 @seealso
 
-Music Glossary: @rglos{fifth}, @rglos{interval}, @rglos{Pitch names}.
+Music Glossary:
+@rglos{fifth},
+@rglos{interval},
+@rglos{Pitch names}.
+
+Notation Reference:
+@ref{Octave checks}.
+
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Notation Reference: @ref{Octave checks}.
+Internals Reference:
+@internalsref{RelativeOctaveMusic}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
 
+@funindex \transpose
+@funindex \chordmode
+@funindex \relative
 
-@refbugs
+@knownissues
 
 The relative conversion will not affect @code{\transpose},
 @code{\chordmode} or @code{\relative} sections in its argument.
 To use relative mode within transposed music, an additional
 @code{\relative} must be placed inside @code{\transpose}.
 
-@c NOTE: DEPRECATED
+@c DEPRECATED
 If no @var{startpitch} is specified for @code{\relative},
 then@tie{}@code{c'} is assumed.  However, this is a deprecated
 option and may disappear in future versions, so its use is
@@ -219,8 +233,13 @@ discouraged.
 
 
 @node Accidentals
-@subsubsection Accidentals
+@unnumberedsubsubsec Accidentals
 
+@cindex accidental
+@cindex key signature
+@cindex clef
+
+@c duplicated in Key signature and Accidentals
 @warning{New users are sometimes confused about accidentals and
 key signatures.  In LilyPond, note names are the raw input; key
 signatures and clefs determine how this raw input is displayed.
@@ -230,13 +249,20 @@ see @rlearning{Accidentals and key signatures}.}
 
 @cindex note names, Dutch
 @cindex note names, default
-
-A @notation{sharp} pitch is made by adding @code{is} to the name,
-and a @notation{flat} pitch by adding @code{es}.  As you might
-expect, a @notation{double sharp} or @notation{double flat} is
-made by adding @code{isis} or @code{eses}.  This syntax is derived
-from Dutch note naming conventions.  To use other names for
-accidentals, see @ref{Note names in other languages}.
+@cindex sharp
+@cindex flat
+@cindex double sharp
+@cindex sharp, double
+@cindex double flat
+@cindex flat, double
+@cindex natural sign
+
+A @notation{sharp} pitch is made by adding @code{is} to the note name,
+and a @notation{flat} pitch by adding @code{es}.  As you might expect,
+a @notation{double sharp} or @notation{double flat} is made by adding
+@code{isis} or @code{eses}.  This syntax is derived from Dutch note
+naming conventions.  To use other names for accidentals, see
+@ref{Note names in other languages}.
 
 @lilypond[verbatim,quote,ragged-right,fragment,relative=2]
 ais1 aes aisis aeses
@@ -255,7 +281,7 @@ a4 aes a2
 @cindex semi-flats, semi-sharps
 
 Quarter tones may be added; the following is a series of Cs with
-increasing pitches
+increasing pitches:
 
 @lilypond[verbatim,quote,ragged-right,fragment,relative=2]
 ceseh1 ces ceh c cih cis cisih
@@ -294,26 +320,40 @@ cis
 @end lilypond
 
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
 {preventing-extra-naturals-from-being-automatically-added.ly}
 
 @seealso
 
-Music Glossary: @rglos{sharp}, @rglos{flat}, @rglos{double sharp},
-@rglos{double flat}, @rglos{Pitch names}.
+Music Glossary:
+@rglos{sharp},
+@rglos{flat},
+@rglos{double sharp},
+@rglos{double flat},
+@rglos{Pitch names},
+@rglos{quarter tone}.
 
-Learning Manual: @rlearning{Accidentals and key signatures}.
+Learning Manual:
+@rlearning{Accidentals and key signatures}.
 
-Notation Reference: @ref{Automatic accidentals},
-@ref{Musica ficta accidentals},
+Notation Reference:
+@ref{Automatic accidentals},
+@ref{Annotational accidentals},
 @ref{Note names in other languages}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
+Internals Reference:
+@internalsref{Accidental_engraver}, 
+@internalsref{Accidental},
+@internalsref{AccidentalCautionary},
+@internalsref{accidental-interface}.
 
-@refbugs
+
+@knownissues
 
 There are no generally accepted standards for denoting
 quarter-tone accidentals, so LilyPond's symbol does not conform to
@@ -322,7 +362,7 @@ any standard.
 
 
 @node Note names in other languages
-@subsubsection Note names in other languages
+@unnumberedsubsubsec Note names in other languages
 
 There are predefined sets of note names for various other
 languages.  To use them, include the language-specific init file.
@@ -331,6 +371,7 @@ For example, to use English notes names, add @code{\include
 language files and the note names they define are:
 
 @cindex note names, other languages
+@cindex pitch names, other languages
 
 @smallexample
 @multitable {nederlands.ly} {do re mi fa sol la sib si} {-iss/-is} {-ess/-es} {-ss/-x/-sharpsharp} {-essess/-eses}
@@ -398,7 +439,7 @@ languages, no special names have been defined yet.
 @multitable {nederlands.ly} {do re mi fa sol la sib si} {-iss/-is} {-ess/-es} {-ississ/-isis} {-ississ/-isis}
 @headitem Language
   @tab Note names
-  @tab semi- @tab semi- @tab sesqui- @tab sesqui-
+  @tab semi-sharp @tab semi-flat @tab sesqui-sharp @tab sesqui-flat
 
 @item nederlands.ly
   @tab c d e f g a bes b
@@ -421,9 +462,11 @@ languages, no special names have been defined yet.
 
 @seealso
 
-Music Glossary: @rglos{Pitch names}.
+Music Glossary:
+@rglos{Pitch names}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
 
 @node Changing multiple pitches
@@ -437,7 +480,7 @@ This section discusses how to modify pitches.
 @end menu
 
 @node Octave checks
-@subsubsection Octave checks
+@unnumberedsubsubsec Octave checks
 
 @cindex octave correction
 @cindex octave check
@@ -449,7 +492,7 @@ Octave checks make such errors easier to find by displaying a
 warning and correcting the octave if a note is found in an
 unexpected octave.
 
-To check the octave of a specific note, specify the absolute
+To check the octave of a note, specify the absolute
 octave after the @code{=}@tie{}symbol.  This example will generate
 a warning (and change the pitch) because the second note is the
 absolute octave @code{d''} instead of @code{d'} as indicated by
@@ -462,14 +505,13 @@ the octave correction.
 }
 @end lilypond
 
-The octave of pitches may also be checked with the
-@code{\octave}@tie{}@var{controlpitch} command.
-@var{controlpitch} is specified in absolute mode.  This checks
-that the interval between the previous note and the
-@var{controlpitch} is within a fourth (i.e. the normal calculation
-of relative mode).  If this check fails, a warning is printed, but
-the previous note is not changed.  Future notes are relative to
-the @var{controlpitch}.
+The octave of notes may also be checked with the
+@code{\octave}@tie{}@var{controlpitch} command.  @var{controlpitch} is
+specified in absolute mode.  This checks that the interval between the
+previous note and the @var{controlpitch} is within a fourth (i.e., the
+normal calculation of relative mode).  If this check fails, a warning
+is printed, but the previous note is not changed.  Future notes are
+relative to the @var{controlpitch}.
 
 @lilypond[verbatim,quote,ragged-right,fragment]
 \relative c'' {
@@ -480,7 +522,7 @@ the @var{controlpitch}.
 @end lilypond
 
 Compare the two bars below.  The first and third @code{\octave}
-check fail, but the second one does not fail.
+checks fail, but the second one does not fail.
 
 @lilypond[verbatim,quote,ragged-right,fragment]
 \relative c'' {
@@ -499,13 +541,18 @@ check fail, but the second one does not fail.
 
 @seealso
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
+
+Internals Reference:
+@internalsref{RelativeOctaveCheck}.
 
 
 @node Transpose
-@subsubsection Transpose
+@unnumberedsubsubsec Transpose
 
 @cindex transpose
+@cindex transposition
 @cindex transposition of pitches
 @funindex \transpose
 
@@ -536,7 +583,7 @@ automatically transposed as well.
 }
 @end lilypond
 
-If a part written in C (normal concert pitch) is to be played on
+If a part written in C (normal @notation{concert pitch}) is to be played on
 the A clarinet (for which an A is notated as a C and thus sounds a
 minor third lower than notated), the appropriate part will be
 produced with:
@@ -599,7 +646,7 @@ For more information about transposing instruments,
 see @ref{Instrument transpositions}.
 
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
 {transposing-pitches-with-minimum-accidentals-smart-transpose.ly}
@@ -607,13 +654,21 @@ see @ref{Instrument transpositions}.
 
 @seealso
 
-Notation Reference: @ref{Instrument transpositions}.
+Notation Reference:
+@ref{Instrument transpositions}.
+
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Internals Reference:
+@internalsref{TransposedMusic}.
 
-Internals Reference: @internalsref{TransposedMusic}.
+@funindex \transpose
+@funindex \chordmode
+@funindex \relative
+
+@knownissues
 
-@refbugs
 
 The relative conversion will not affect @code{\transpose},
 @code{\chordmode} or @code{\relative} sections in its argument.
@@ -637,10 +692,9 @@ This section discusses how to alter the output of pitches.
 
 
 @node Clef
-@subsubsection Clef
+@unnumberedsubsubsec Clef
 
 @funindex \clef
-
 @cindex G clef
 @cindex C clef
 @cindex F clef
@@ -655,6 +709,23 @@ This section discusses how to alter the output of pitches.
 @cindex baritone clef
 @cindex varbaritone clef
 @cindex subbass clef
+@cindex clef
+@cindex ancient clef
+@cindex clef, ancient
+@cindex clef, G
+@cindex clef, C
+@cindex clef, F
+@cindex clef, treble
+@cindex clef, violin 
+@cindex clef, alto 
+@cindex clef, tenor
+@cindex clef, bass 
+@cindex clef, french 
+@cindex clef, soprano 
+@cindex clef, mezzosoprano 
+@cindex clef, baritone 
+@cindex clef, varbaritone 
+@cindex subbass clef, subbass 
 
 The clef is set with the @code{\clef} @var{clefname} command.
 Middle C is shown in every example.
@@ -696,9 +767,13 @@ c2 c
 
 Further supported clefs are described under @ref{Ancient clefs}.
 
+@cindex transposing clefs
+@cindex clef, transposing
+@cindex octave transposition
+
 By adding @code{_8} or @code{^8} to the clef name, the clef is
 transposed one octave down or up, respectively, and @code{_15} and
-@code{^15} transposes by two octaves.  The argument @var{clefname}
+@code{^15} transpose by two octaves.  The argument @var{clefname}
 must be enclosed in quotes when it contains underscores or digits.
 
 @cindex choral tenor clef
@@ -711,27 +786,34 @@ c2 c
 @end lilypond
 
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
-{clefs-commonly-tweaked-properties.ly}
+{tweaking-clef-properties.ly}
 
 
 @seealso
 
-Notation Reference: @ref{Ancient clefs}.
+Notation Reference:
+@ref{Ancient clefs}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Internals Reference: @internalsref{Clef}.
+Internals Reference:
+@internalsref{Clef_engraver},
+@internalsref{Clef},
+@internalsref{OctavateEight},
+@internalsref{clef-interface}.
 
 
 @node Key signature
-@subsubsection Key signature
+@unnumberedsubsubsec Key signature
 
 @cindex key signature
 @funindex \key
 
+@c duplicated in Key signature and Accidentals
 @warning{New users are sometimes confused about accidentals and
 key signatures.  In LilyPond, note names are the raw input; key
 signatures and clefs determine how this raw input is displayed.
@@ -748,7 +830,6 @@ is done with the @code{\key} command:
 \key @var{pitch} @var{mode}
 @end example
 
-@funindex \minor
 @funindex \major
 @funindex \minor
 @funindex \ionian
@@ -759,11 +840,12 @@ is done with the @code{\key} command:
 @funindex \phrygian
 @funindex \dorian
 @cindex church modes
+@cindex modes
 
 Here, @var{mode} should be @code{\major} or @code{\minor} to get a
 key signature of @var{pitch}-major or @var{pitch}-minor,
 respectively.  You may also use the standard mode names, also
-called @q{church modes}: @code{\ionian}, @code{\dorian},
+called @notation{church modes}: @code{\ionian}, @code{\dorian},
 @code{\phrygian}, @code{\lydian}, @code{\mixolydian},
 @code{\aeolian}, and @code{\locrian}.
 
@@ -775,7 +857,7 @@ fis
 @end lilypond
 
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
 {preventing-natural-signs-from-being-printed-when-the-key-signature-changes.ly}
@@ -786,18 +868,28 @@ fis
 
 @seealso
 
-Music Glossary: @rglos{church mode}, @rglos{scordatura}.
+Music Glossary:
+@rglos{church mode},
+@rglos{scordatura}.
 
-Learning Manual: @rlearning{Accidentals and key signatures}.
+Learning Manual:
+@rlearning{Accidentals and key signatures}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Internals Reference: @internalsref{KeyCancellation},
-@internalsref{KeySignature}, @internalsref{Key_engraver}.
+Internals Reference:
+@internalsref{KeyChangeEvent},
+@internalsref{Key_engraver},
+@internalsref{Key_performer},
+@internalsref{KeyCancellation},
+@internalsref{KeySignature},
+@internalsref{key-cancellation-interface},
+@internalsref{key-signature-interface}.
 
 
 @node Ottava brackets
-@subsubsection Ottava brackets
+@unnumberedsubsubsec Ottava brackets
 
 @cindex ottava
 @cindex 15ma
@@ -820,7 +912,7 @@ The @code{set-octavation} function also takes -1 (for 8va bassa),
 2@tie{}(for 15ma), and -2 (for 15ma bassa) as arguments.
 
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
 {ottava-text.ly}
@@ -828,19 +920,27 @@ The @code{set-octavation} function also takes -1 (for 8va bassa),
 
 @seealso
 
-Music Glossary: @rglos{ottava}.
+Music Glossary:
+@rglos{octavation}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Internals Reference: @internalsref{OttavaBracket}.
+Internals Reference:
+@internalsref{Ottava_spanner_engraver},
+@internalsref{OttavaBracket},
+@internalsref{ottava-bracket-interface}.
 
 
 
 @node Instrument transpositions
-@subsubsection Instrument transpositions
+@unnumberedsubsubsec Instrument transpositions
 
 @cindex transposition, MIDI
 @cindex transposition, instrument
+@cindex transposing instrument
+@cindex MIDI
+@funindex \transposition
 
 When typesetting scores that involve transposing instruments, some
 parts can be typeset in a different pitch than the
@@ -866,15 +966,16 @@ concert pitch.
 Here are a few notes for violin and B-flat clarinet where the
 parts have been entered using the notes and key as they appear in
 each part of the conductor's score.  The two instruments are
-playing in unison.
+playing in unison.  Adding the @code{\transposition c'} to the
+violin part is not strictly necessary, but it is a useful
+reminder.
 
 @lilypond[verbatim,quote,ragged-right]
 \new GrandStaff <<
   \new Staff = "Vln" {
     \relative c'' {
       \set Staff.instrumentName = "Vln"
-      \set Staff.midiInstrument="violin"
-      % strictly speaking not necessary, but a good reminder
+      \set Staff.midiInstrument = "violin"
       \transposition c'
 
       \key c \major
@@ -883,11 +984,10 @@ playing in unison.
   }
   \new Staff = "clarinet" {
     \relative c'' {
-      \set Staff.instrumentName = \markup {Cl (B\flat)}
-      \set Staff.midiInstrument="clarinet"
+      \set Staff.instrumentName = \markup { Cl (B\flat) }
+      \set Staff.midiInstrument = "clarinet"
       \transposition bes
 
-      % not concert pitch
       \key d \major
       a4( d8) r d r d4
     }
@@ -905,7 +1005,8 @@ clarinet.
 \transposition a
 c d e f
 \textLengthOn
-r1^\markup{Switch to B\flat clarinet}
+s1*0^\markup { Switch to B\flat clarinet }
+R1
 
 \key bes \major
 \transposition bes
@@ -915,18 +1016,26 @@ c2 g
 
 @seealso
 
-Music Glossary: @rglos{concert pitch},
+Music Glossary:
+@rglos{concert pitch},
 @rglos{transposing instrument}.
 
-Notation Reference: @ref{Quoting other voices}, @ref{Transpose}.
+Notation Reference:
+@ref{Quoting other voices}, @ref{Transpose}.
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
 
 @node Automatic accidentals
-@subsubsection Automatic accidentals
-@cindex automatic accidentals
+@unnumberedsubsubsec Automatic accidentals
 
+@cindex accidental style
+@cindex accidental style, default
+@cindex accidentals
+@cindex accidentals, automatic
+@cindex automatic accidentals
+@cindex default accidental style
 @funindex set-accidental-style
 
 There are many different conventions on how to typeset
@@ -989,12 +1098,10 @@ musicB = {
 \new PianoStaff {
   <<
     \context Staff = "up" {
-      %%% change the next line as desired:
       #(set-accidental-style 'default)
       \musicA
     }
     \context Staff = "down" {
-      %%% change the next line as desired:
       #(set-accidental-style 'default)
       \musicB
     }
@@ -1005,6 +1112,7 @@ musicB = {
 Note that the last lines of this example can be replaced by the
 following, as long as the same accidental style should be used in
 both staves.
+
 @example
 \new PianoStaff @{
   <<
@@ -1021,12 +1129,12 @@ both staves.
 @end example
 
 
-@c NOTE: don't use verbatim in this table.
+@c don't use verbatim in this table.
 @table @code
 @item default
 This is the default typesetting behavior.  It corresponds to
 eighteenth-century common practice: accidentals are remembered to
-the end of the measure in which they occur and only on their own
+the end of the measure in which they occur and only in their own
 octave.  Thus, in the example below, no natural signs are printed
 before the@tie{}@code{b} in the second measure or the
 last@tie{}@code{c}:
@@ -1078,7 +1186,7 @@ musicB = {
 @end lilypond
 
 @item voice
-The normal behavior is to remember the accidentals on Staff-level.
+The normal behavior is to remember the accidentals at @code{Staff}-level.
 In this style, however, accidentals are typeset individually for
 each voice.  Apart from that, the rule is similar to
 @code{default}.
@@ -1140,6 +1248,8 @@ musicB = {
 @end lilypond
 
 @item modern
+@cindex accidentals, modern style
+@cindex modern style accidentals
 @funindex modern style accidentals
 
 This rule corresponds to the common practice in the twentieth
@@ -1198,6 +1308,11 @@ musicB = {
 @end lilypond
 
 @item modern-cautionary
+@cindex accidentals, modern cautionary style
+@cindex modern accidental style
+@cindex modern cautionary accidental style
+@cindex modern style accidentals
+@cindex modern style cautionary accidentals
 @funindex modern-cautionary
 
 This rule is similar to @code{modern}, but the @q{extra}
@@ -1255,6 +1370,12 @@ musicB = {
 @end lilypond
 
 @item modern-voice
+@cindex accidental style, modern
+@cindex accidentals, modern
+@cindex accidentals, multivoice
+@cindex modern accidental style
+@cindex modern accidentals
+@cindex multivoice accidentals
 @funindex modern-voice
 
 This rule is used for multivoice accidentals to be read both by
@@ -1313,6 +1434,9 @@ musicB = {
 }
 @end lilypond
 
+@cindex accidental style, cautionary, modern voice
+@cindex accidental style, modern voice cautionary
+@cindex accidental style, voice, modern cautionary
 @funindex modern-voice-cautionary
 @item modern-voice-cautionary
 
@@ -1369,13 +1493,16 @@ musicB = {
 @end lilypond
 
 @item piano
-@funindex piano accidentals
+@cindex accidental style, piano
+@cindex accidentals, piano
+@cindex piano accidental style
+@cindex piano accidentals
 
 This rule reflects twentieth-century practice for piano notation.
 Its behavior is very similar to @code{modern} style, but here
 accidentals also get canceled across the staves in the same
-GrandStaff or PianoStaff, hence all the cancellations of the final
-notes.
+@code{GrandStaff} or @code{PianoStaff}, hence all the cancellations
+of the final notes.
 
 This accidental style applies to the current @code{GrandStaff} or
 @code{PianoStaff} by default.
@@ -1427,6 +1554,12 @@ musicB = {
 
 @item piano-cautionary
 @funindex #(set-accidental-style 'piano-cautionary)
+@cindex accidentals, piano cautionary
+@cindex cautionary accidentals, piano
+@cindex piano cautionary accidentals
+@cindex accidental style, piano cautionary
+@cindex cautionary accidental style, piano
+@cindex piano cautionary accidental style
 
 Same as @code{#(set-accidental-style 'piano)} but with the extra
 accidentals typeset as cautionaries.
@@ -1478,6 +1611,8 @@ musicB = {
 
 @item no-reset
 @funindex no-reset accidental style
+@cindex accidental style, no reset
+@cindex no reset accidental style
 
 This is the same as @code{default} but with accidentals lasting
 @q{forever} and not only within the same measure:
@@ -1530,10 +1665,12 @@ musicB = {
 
 @item forget
 @funindex forget accidental style
+@cindex forget accidental style
+@cindex accidental style, forget
 
 This is the opposite of @code{no-reset}: Accidentals are not
 remembered at all -- and hence all accidentals are typeset
-relative to the key signature, regardless of what was before in
+relative to the key signature, regardless of what came before in
 the music:
 
 @lilypond[quote,ragged-right]
@@ -1583,7 +1720,7 @@ musicB = {
 @end lilypond
 @end table
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
 {dodecaphonic-style-accidentals-for-each-note-including-naturals.ly}
@@ -1591,15 +1728,26 @@ musicB = {
 
 @seealso
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Internals Reference: @internalsref{Accidental_engraver},
-@internalsref{Accidental}, @internalsref{AccidentalSuggestion},
-@internalsref{AccidentalPlacement}, @internalsref{GrandStaff} and
-@internalsref{PianoStaff}, @internalsref{Staff}.
+Internals Reference:
+@internalsref{Accidental},
+@internalsref{Accidental_engraver},
+@internalsref{GrandStaff} and
+@internalsref{PianoStaff},
+@internalsref{Staff},
+@internalsref{AccidentalSuggestion},
+@internalsref{AccidentalPlacement},
+@internalsref{accidental-suggestion-interface}.
 
 
-@refbugs
+@cindex accidentals and simultaneous notes
+@cindex simultaneous notes and accidentals
+@cindex accidentals in chords
+@cindex chords, accidentals in
+
+@knownissues
 
 Simultaneous notes are considered to be entered in sequential
 mode.  This means that in a chord the accidentals are typeset as
@@ -1612,16 +1760,19 @@ problematic notes.
 
 
 @node Ambitus
-@subsubsection Ambitus
+@unnumberedsubsubsec Ambitus
+
 @cindex ambitus
+@cindex range of pitches
+@cindex pitch range
 
-The term @notation{ambitus} or @notation{ambit} denotes a range of
+The term @notation{ambitus} (pl. ambitus) denotes a range of
 pitches for a given voice in a part of music.  It may also denote
 the pitch range that a musical instrument is capable of playing.
-Ambits are printed on vocal parts so that performers can easily
+Ambitus are printed on vocal parts so that performers can easily
 determine if it matches their capabilities.
 
-Ambits are denoted at the beginning of a piece near the initial
+Ambitus are denoted at the beginning of a piece near the initial
 clef.  The range is graphically specified by two note heads that
 represent the lowest and highest pitches.  Accidentals are only
 printed if they are not part of the key signature.
@@ -1630,36 +1781,46 @@ printed if they are not part of the key signature.
 \layout {
   \context {
     \Voice
-    \consists Ambitus_engraver
+    \consists "Ambitus_engraver"
   }
 }
 
 \relative c'' {
-  aes c e2 cis,2
+  aes c e2
+  cis,1
 }
 @end lilypond
 
 
-@commonprop
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
-{adding-ambiti-per-voice.ly}
+{adding-ambitus-per-voice.ly}
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
-{ambiti-multiple-voices.ly}
+{ambitus-with-multiple-voices.ly}
 
 
 @seealso
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Music Glossary:
+@rglos{ambitus}.
 
-Internals Reference: @internalsref{Ambitus},
-@internalsref{AmbitusLine}, @internalsref{AmbitusNoteHead},
-@internalsref{AmbitusAccidental}, @internalsref{Ambitus_engraver},
-@internalsref{Staff}, @internalsref{Voice}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
+Internals Reference:
+@internalsref{Ambitus_engraver},
+@internalsref{Voice},
+@internalsref{Staff},
+@internalsref{Ambitus},
+@internalsref{AmbitusAccidental},
+@internalsref{AmbitusLine},
+@internalsref{AmbitusNoteHead},
+@internalsref{ambitus-interface}.
 
-@refbugs
+
+@knownissues
 
 There is no collision handling in the case of multiple per-voice
 ambitus.
@@ -1668,6 +1829,8 @@ ambitus.
 @node Note heads
 @subsection Note heads
 
+This section suggests ways of altering note heads.
+
 @menu
 * Special note heads::          
 * Easy notation note heads::    
@@ -1676,9 +1839,20 @@ ambitus.
 @end menu
 
 @node Special note heads
-@subsubsection Special note heads
+@unnumberedsubsubsec Special note heads
 
 @cindex note heads, special
+@cindex note heads, cross
+@cindex note heads, diamond
+@cindex note heads, parlato
+@cindex note heads, harmonic
+@cindex note heads, guitar
+@cindex special note heads
+@cindex cross note heads
+@cindex diamond note heads
+@cindex parlato note heads
+@cindex harmonic note heads
+@cindex guitar note heads
 
 Different note heads are used by various instruments for various
 meanings -- crosses are used for @q{parlato} with vocalists,
@@ -1701,21 +1875,33 @@ To see all note head styles, see @ref{Note head styles}.
 
 @seealso
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Notation Reference: @ref{Note head styles}.
+Notation Reference:
+@ref{Note head styles}.
 
-Internals Reference: @internalsref{NoteHead},
-@internalsref{LedgerLineSpanner}.
+Internals Reference:
+@internalsref{note-event},
+@internalsref{Note_heads_engraver},
+@internalsref{Ledger_line_engraver},
+@internalsref{NoteHead},
+@internalsref{LedgerLineSpanner},
+@internalsref{note-head-interface},
+@internalsref{ledger-line-spanner-interface}.
 
 
 @node Easy notation note heads
-@subsubsection Easy notation note heads
+@unnumberedsubsubsec Easy notation note heads
 
 @cindex note heads, practice
 @cindex note heads, easy notation
 @cindex easy notation
 @cindex Hal Leonard
+@cindex beginners' music
+@cindex music, beginners'
+@cindex easy play note heads
+@cindex note heads, easy play
 
 The @q{easy play} note head includes a note name inside the head.
 It is used in music for beginners.
@@ -1737,7 +1923,7 @@ The command @code{\easyHeadsOn} overrides settings for the
 in a large font size.  To print with a larger font, see @ref{Setting the
 staff size}.
 
-@refcommands
+@predefined
 
 @funindex \easyHeadsOn
 @funindex \easyHeadsOff
@@ -1745,17 +1931,28 @@ staff size}.
 
 @seealso
 
-Notation Reference: @ref{Setting the staff size}.
+Notation Reference:
+@ref{Setting the staff size}.
 
-Snippets: @lsrdir{Pitches,Pitches},
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Internals Reference: @internalsref{NoteHead}.
+Internals Reference:
+@internalsref{note-event},
+@internalsref{Note_heads_engraver},
+@internalsref{NoteHead},
+@internalsref{note-head-interface}.
 
 
 @node Shape note heads
-@subsubsection Shape note heads
+@unnumberedsubsubsec Shape note heads
 
 @cindex note heads, shape
+@cindex note heads, Aiken
+@cindex note heads, sacred harp
+@cindex shape notes
+@cindex Aiken shape note heads
+@cindex sacred harp note heads
 @funindex \key
 @funindex shapeNoteStyles
 @funindex \aikenHeads
@@ -1770,27 +1967,47 @@ Shape note heads can be produced by setting @code{\aikenHeads} or
 
 @lilypond[verbatim,fragment,quote,ragged-right,relative=1]
 \aikenHeads
-c8 d4 e8 a2 g1
+c8 d4 e8 a2
+g1
 \sacredHarpHeads
-c,8 d4 e8 a2 g1
+c,8 d4 e8 a2
+g1
 @end lilypond
 
 Shapes are typeset according to the step in the scale, where
 the base of the scale is determined by the @code{\key} command.
 
-@commonprop
+@predefined
+
+@funindex \aikenHeads
+@funindex \sacredHarpHeads
+@code{\aikenHeads}, @code{\sacredHarpHeads}
+
+@snippets
 
 @lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
-{applying-noteheads-styles-depending-on-the-step-of-the-scale.ly}
+{applying-note-head-styles-depending-on-the-step-of-the-scale.ly}
 
+@noindent
+To see all note head styles, see @ref{Note head styles}.
 
 @seealso
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
+
+Notation Reference:
+@ref{Note head styles}.
+
+Internals Reference:
+@internalsref{note-event},
+@internalsref{Note_heads_engraver},
+@internalsref{NoteHead},
+@internalsref{note-head-interface}.
 
 
 @node Improvisation
-@subsubsection Improvisation
+@unnumberedsubsubsec Improvisation
 
 @cindex improvisation
 @cindex slashed note heads
@@ -1803,20 +2020,20 @@ rhythm.  Such note heads can be created:
 
 @lilypond[verbatim,quote,ragged-right]
 \new Voice \with {
-  \consists Pitch_squash_engraver
+  \consists "Pitch_squash_engraver"
 } \transpose c c' {
   e8 e g a a16( bes) a8 g
   \improvisationOn
-  e8
-  ~e2~e8 f4 fis8
-  ~fis2
+  e8 ~
+  e2 ~ e8 f4 f8 ~
+  f2
   \improvisationOff
-  a16(bes) a8 g e
+  a16( bes) a8 g e
 }
 @end lilypond
 
 
-@refcommands
+@predefined
 
 @funindex \improvisationOn
 @funindex \improvisationOff
@@ -1825,9 +2042,12 @@ rhythm.  Such note heads can be created:
 
 @seealso
 
-Snippets: @lsrdir{Pitches,Pitches}.
+Snippets:
+@lsrdir{Pitches,Pitches}.
 
-Internals Reference: @internalsref{Pitch_squash_engraver},
-@internalsref{Voice}.
+Internals Reference:
+@internalsref{Pitch_squash_engraver},
+@internalsref{Voice},
+@internalsref{RhythmicStaff}.