version that you are working on. See TRANSLATION for details.
@end ignore
+@c \version "2.11.38"
+
@c A menu is needed before every deeper *section nesting of @node's; run
@c M-x texinfo-all-menus-update
@c to automatically fill in these menus before saving changes
@node Non-musical notation
@chapter Non-musical notation
-This section deals with general lilypond issues, rather than
+This section deals with general LilyPond issues, rather than
specific notation.
@menu
-* Input files::
-* Titles and headers::
* MIDI output::
-* Displaying LilyPond notation::
-* Skipping corrected music::
+* other midi::
@end menu
-@node Input files
-@section Input files
-
-The main format of input for LilyPond are text files. By convention,
-these files end with ``@code{.ly}''.
-
-@menu
-* File structure (introduction)::
-* Multiple scores in a book::
-* Extracting fragments of notation::
-* File structure::
-* A single music expression::
-* Including LilyPond files::
-* Text encoding::
-@end menu
-
-
-@node File structure (introduction)
-@subsection File structure (introduction)
-
-A basic example of a lilypond input file is
-
-@example
-\version "2.9.13"
-\score @{
- @{ @} % this is a single music expression;
- % all the music goes in here.
- \header @{ @}
- \layout @{ @}
- \midi @{ @}
-@}
-@end example
-
-@noindent
-There are many variations of this basic pattern, but this
-example serves as a useful starting place.
-
-The major part of this manual is concerned with entering various
-forms of music in LilyPond. However, many music expressions are not
-valid input on their own, for example, a @code{.ly} file containing
-only a note
-@example
-c'4
-@end example
-
-@noindent
-will result in a parsing error. Instead, music should be inside other
-expressions, which may be put in a file by themselves. Such
-expressions are called toplevel expressions. The next section enumerates
-them all.
-
-
-@node Multiple scores in a book
-@subsection Multiple scores in a book
-
-@funindex \book
-@cindex movements, multiple
-
-A document may contain multiple pieces of music and texts. Examples
-of these are an etude book, or an orchestral part with multiple
-movements. Each movement is entered with a @code{\score} block,
-
-@example
-\score @{
- @var{..music..}
-@}
-@end example
-
-and texts are entered with a @code{\markup} block,
-
-@example
-\markup @{
- @var{..text..}
-@}
-@end example
-
-@funindex \book
-
-All the movements and texts which appear in the same @code{.ly} file
-will normally be typeset in the form of a single output file.
-
-@example
-\score @{
- @var{..}
-@}
-\markup @{
- @var{..}
-@}
-\score @{
- @var{..}
-@}
-@end example
-
-However, if you want multiple output files from the same @code{.ly}
-file, then you can add multiple @code{\book} blocks, where each such
-@code{\book} block will result in a separate output. If you do not
-specify any @code{\book} block in the file, LilyPond will implicitly
-treat the full file as a single @code{\book} block, see @ref{File
-structure}. One important exception is within lilypond-book documents,
-where you explicitly have to add a @code{\book} block, otherwise only
-the first @code{\score} or @code{\markup} will appear in the output.
-
-The header for each piece of music can be put inside the @code{\score}
-block. The @code{piece} name from the header will be printed before
-each movement. The title for the entire book can be put inside the
-@code{\book}, but if it is not present, the @code{\header} which is at
-the top of the file is inserted.
-
-@example
-\header @{
- title = "Eight miniatures"
- composer = "Igor Stravinsky"
-@}
-\score @{
- @dots{}
- \header @{ piece = "Romanze" @}
-@}
-\markup @{
- ..text of second verse..
-@}
-\markup @{
- ..text of third verse..
-@}
-\score @{
- @dots{}
- \header @{ piece = "Menuetto" @}
-@}
-@end example
-
-@node Extracting fragments of notation
-@subsection Extracting fragments of notation
-
-It is possible to quote small fragments of a large score directly from
-the output. This can be compared to clipping a piece of a paper score
-with scissors.
-
-This is done by definining the measures that need to be cut out
-separately. For example, including the following definition
-
-
-@verbatim
-\layout {
- clip-regions
- = #(list
- (cons
- (make-rhythmic-location 5 1 2)
- (make-rhythmic-location 7 3 4)))
-}
-@end verbatim
-
-@noindent
-will extract a fragment starting halfway the fifth measure, ending in
-the seventh measure. The meaning of @code{5 1 2} is: after a 1/2 note
-in measure 5, and @code{7 3 4} after 3 quarter notes in measure 7.
-
-More clip regions can be defined by adding more pairs of
-rhythmic-locations to the list.
-
-In order to use this feature, LilyPond must be invoked with
-@code{-dclip-systems}. The clips are output as EPS files, and are
-converted to PDF and PNG if these formats are switched on as well.
-
-For more information on output formats, see @ref{Invoking lilypond}.
-
-@seealso
-
-Examples: @inputfileref{input/regression/,clip-systems.ly}
-
-
-@node File structure
-@subsection File structure
-
-A @code{.ly} file contains any number of toplevel expressions, where a
-toplevel expression is one of the following
-
-@itemize @bullet
-@item
-An output definition, such as @code{\paper}, @code{\midi}, and
-@code{\layout}. Such a definition at the toplevel changes the default
-settings for the block entered.
-
-@item
-A direct scheme expression, such as
-@code{#(set-default-paper-size "a7" 'landscape)} or
-@code{#(ly:set-option 'point-and-click #f)}.
-
-@item
-A @code{\header} block. This sets the global header block. This
-is the block containing the definitions for book-wide settings, like
-composer, title, etc.
-
-@item
-A @code{\score} block. This score will be collected with other
-toplevel scores, and combined as a single @code{\book}.
-
-This behavior can be changed by setting the variable
-@code{toplevel-score-handler} at toplevel. The default handler is
-defined in the init file @file{scm/@/lily@/.scm}.
-
-The @code{\score} must begin with a music expression, and may
-contain only one music expression.
-
-@item
-A @code{\book} block logically combines multiple movements
-(i.e., multiple @code{\score} blocks) in one document. If there are
-a number of @code{\scores}, one output file will be created for
-each @code{\book} block, in which all corresponding movements are
-concatenated. The only reason to explicitly specify @code{\book} blocks
-in a @code{.ly} file is if you wish multiple output files from a single
-input file. One exception is within lilypond-book documents, where you
-explicitly have to add a @code{\book} block if you want more than a
-single @code{\score} or @code{\markup} in the same example.
-
-This behavior can be changed by setting the variable
-@code{toplevel-book-handler} at toplevel. The default handler is
-defined in the init file @file{scm/@/lily@/.scm}.
-
-@item
-A compound music expression, such as
-@example
-@{ c'4 d' e'2 @}
-@end example
-
-This will add the piece in a @code{\score} and format it in a
-single book together with all other toplevel @code{\score}s and music
-expressions. In other words, a file containing only the above
-music expression will be translated into
-
-@example
-\book @{
- \score @{
- \new Staff @{
- \new Voice @{
- @{ c'4 d' e'2 @}
- @}
- @}
- @}
- \layout @{ @}
- \header @{ @}
-@}
-@end example
-
-This behavior can be changed by setting the variable
-@code{toplevel-music-handler} at toplevel. The default handler is
-defined in the init file @file{scm/@/lily@/.scm}.
-
-@item
-A markup text, a verse for example
-@example
-\markup @{
- 2. The first line verse two.
-@}
-@end example
-
-Markup texts are rendered above, between or below the scores or music
-expressions, wherever they appear.
-
-@cindex variables
-@cindex identifiers
-
-@item
-An identifier, such as
-@example
-foo = @{ c4 d e d @}
-@end example
-
-This can be used later on in the file by entering @code{\foo}. The
-name of an identifier should have alphabetic characters only; no
-numbers, underscores or dashes.
-
-@end itemize
-
-The following example shows three things that may be entered at
-toplevel
-
-@example
-\layout @{
- % movements are non-justified by default
- ragged-right = ##t
-@}
-
-\header @{
- title = "Do-re-mi"
-@}
-
-@{ c'4 d' e2 @}
-@end example
-
-
-At any point in a file, any of the following lexical instructions can
-be entered:
-
-@itemize @bullet
-@item @code{\version}
-@item @code{\include}
-@item @code{\sourcefilename}
-@item @code{\sourcefileline}
-
-@end itemize
-
-
-@node A single music expression
-@subsection A single music expression
-
-A @code{\score} must contain a single music expression. However,
-this music expression may be of any size. Recall that music
-expressions may be included inside other expressions to form
-larger expressions. All of these examples are single music
-expressions; note the curly braces @{ @} or angle brackets <<
->> at the beginning and ending of the music.
-
-@example
-@{ c'4 c' c' c' @}
-@end example
-
-@lilypond[ragged-right,verbatim,quote]
-{
- { c'4 c' c' c'}
- { d'4 d' d' d'}
-}
-@end lilypond
-
-@lilypond[ragged-right,verbatim,quote]
-<<
- \new Staff { c'4 c' c' c' }
- \new Staff { d'4 d' d' d' }
->>
-@end lilypond
-
-@example
-@{
- \new GrandStaff <<
- \new StaffGroup <<
- \new Staff @{ \flute @}
- \new Staff @{ \oboe @}
- >>
- \new StaffGroup <<
- \new Staff @{ \violinI @}
- \new Staff @{ \violinII @}
- >>
- >>
-@}
-@end example
-
-
-@node Including LilyPond files
-@subsection Including LilyPond files
-
-@funindex \include
-@cindex including files
-
-A large project may be split up into separate files. To refer to another
-file, use
-
-@example
-\include "otherfile.ly"
-@end example
-
-The line @code{\include "file.ly"} is equivalent to pasting the contents
-of file.ly into the current file at the place where you have the
-\include. For example, for a large project you might write separate files
-for each instrument part and create a ``full score'' file which brings
-together the individual instrument files.
-
-The initialization of LilyPond is done in a number of files that are
-included by default when you start the program, normally transparent to the
-user. Run lilypond --verbose to see a list of paths and files that Lily
-finds.
-
-Files placed in directory @file{PATH/TO/share/lilypond/VERSION/ly/} (where
-VERSION is in the form ``2.6.1'') are on the path and available to
-@code{\include}. Files in the
-current working directory are available to \include, but a file of the same
-name in LilyPond's installation takes precedence. Files are
-available to \include from directories in the search path specified as an
-option when invoking @code{lilypond --include=DIR} which adds DIR to the
-search path.
-
-The @code{\include} statement can use full path information, but with the Unix
-convention @code{"/"} rather than the DOS/Windows @code{"\"}. For example,
-if @file{stuff.ly} is located one directory higher than the current working
-directory, use
-
-@example
-\include "../stuff.ly"
-@end example
-
-
-@node Text encoding
-@subsection Text encoding
-
-LilyPond uses the Pango library to format multi-lingual texts, and
-does not perform any input-encoding conversions. This means that any
-text, be it title, lyric text, or musical instruction containing
-non-ASCII characters, must be utf-8. The easiest way to enter such text is
-by using a Unicode-aware editor and saving the file with utf-8 encoding. Most
-popular modern editors have utf-8 support, for example, vim, Emacs,
-jEdit, and GEdit do.
-
-@c Currently not working
-@ignore
-Depending on the fonts installed, the following fragment shows Hebrew
-and Cyrillic lyrics,
-
-@cindex Cyrillic
-@cindex Hebrew
-@cindex ASCII, non
-
-@li lypondfile[fontload]{utf-8.ly}
-
-The @TeX{} backend does not handle encoding specially at all. Strings
-in the input are put in the output as-is. Extents of text items in the
-@TeX{} backend, are determined by reading a file created via the
-@file{texstr} backend,
-
-@example
-lilypond -b texstr input/les-nereides.ly
-latex les-nereides.texstr
-@end example
-
-The last command produces @file{les-nereides.textmetrics}, which is
-read when you execute
-
-@example
-lilypond -b tex input/les-nereides.ly
-@end example
-
-Both @file{les-nereides.texstr} and @file{les-nereides.tex} need
-suitable LaTeX wrappers to load appropriate La@TeX{} packages for
-interpreting non-ASCII strings.
-
-@end ignore
-
-To use a Unicode escape sequence, use
-
-@example
-#(ly:export (ly:wide-char->utf-8 #x2014))
-@end example
-
-
-@seealso
-
-@inputfileref{input/regression,utf-8.ly}
-
-
-
-@node Titles and headers
-@section Titles and headers
-
-Almost all printed music includes a title and the composer's name;
-some pieces include a lot more information.
-
-@menu
-* Creating titles::
-* Custom titles::
-@end menu
-
-
-@node Creating titles
-@subsection Creating titles
-
-Titles are created for each @code{\score} block, and for the full input
-file (or @code{\book} block).
-
-The contents of the titles are taken from the @code{\header} blocks.
-The header block for a book supports the following
-
-
-@table @code
-@funindex dedication
-@item dedication
-The dedicatee of the music, centered at the top of the first page.
-
-@funindex title
-@item title
-The title of the music, centered just below the dedication.
-
-@funindex subtitle
-@item subtitle
-Subtitle, centered below the title.
-
-@funindex subsubtitle
-@item subsubtitle
-Subsubtitle, centered below the subtitle.
-
-@funindex poet
-@item poet
-Name of the poet, flush-left below the subtitle.
-
-@funindex composer
-@item composer
-Name of the composer, flush-right below the subtitle.
-
-@funindex meter
-@item meter
-Meter string, flush-left below the poet.
-
-@funindex opus
-@item opus
-Name of the opus, flush-right below the composer.
-
-@funindex arranger
-@item arranger
-Name of the arranger, flush-right below the opus.
-
-@funindex instrument
-@item instrument
-Name of the instrument, centered below the arranger. Also
-centered at the top of pages (other than the first page).
-
-@funindex piece
-@item piece
-Name of the piece, flush-left below the instrument.
-
-@cindex page breaks, forcing
-@funindex breakbefore
-@item breakbefore
-This forces the title to start on a new page (set to ##t or ##f).
-
-@funindex copyright
-@item copyright
-Copyright notice, centered at the bottom of the first page. To
-insert the copyright symbol, see @ref{Text encoding}.
-
-@funindex tagline
-@item tagline
-Centered at the bottom of the last page.
-
-@end table
-
-Here is a demonstration of the fields available. Note that you
-may use any @ref{Text markup} commands in the header.
-
-@lilypond[quote,verbatim,line-width=11.0\cm]
-\paper {
- line-width = 9.0\cm
- paper-height = 10.0\cm
-}
-
-\book {
- \header {
- dedication = "dedicated to me"
- title = \markup \center-align { "Title first line" "Title second line,
-longer" }
- subtitle = "the subtitle,"
- subsubtitle = #(string-append "subsubtitle LilyPond version "
-(lilypond-version))
- poet = "Poet"
- composer = \markup \center-align { "composer" \small "(1847-1973)" }
- texttranslator = "Text Translator"
- meter = \markup { \teeny "m" \tiny "e" \normalsize "t" \large "e" \huge
-"r" }
- arranger = \markup { \fontsize #8.5 "a" \fontsize #2.5 "r" \fontsize
-#-2.5 "r" \fontsize #-5.3 "a" \fontsize #7.5 "nger" }
- instrument = \markup \bold \italic "instrument"
- piece = "Piece"
- }
-
- \score {
- { c'1 }
- \header {
- piece = "piece1"
- opus = "opus1"
- }
- }
- \markup {
- and now...
- }
- \score {
- { c'1 }
- \header {
- piece = "piece2"
- opus = "opus2"
- }
- }
-}
-@end lilypond
-
-As demonstrated before, you can use multiple @code{\header} blocks.
-When same fields appear in different blocks, the latter is used.
-Here is a short example.
-
-@example
-\header @{
- composer = "Composer"
-@}
-\header @{
- piece = "Piece"
-@}
-\score @{
- \new Staff @{ c'4 @}
- \header @{
- piece = "New piece" % overwrite previous one
- @}
-@}
-@end example
-
-If you define the @code{\header} inside the @code{\score} block, then
-normally only the @code{piece} and @code{opus} headers will be printed.
-Note that the music expression must come before the @code{\header}.
-
-@lilypond[quote,verbatim,line-width=11.0\cm]
-\score {
- { c'4 }
- \header {
- title = "title" % not printed
- piece = "piece"
- opus = "opus"
- }
-}
-@end lilypond
-
-@funindex printallheaders
-@noindent
-You may change this behavior (and print all the headers when defining
-@code{\header} inside @code{\score}) by using
-
-@example
-\paper@{
- printallheaders=##t
-@}
-@end example
-
-@cindex copyright
-@cindex tagline
-
-The default footer is empty, except for the first page, where the
-@code{copyright} field from @code{\header} is inserted, and the last
-page, where @code{tagline} from @code{\header} is added. The default
-tagline is ``Music engraving by LilyPond (@var{version})''.@footnote{Nicely
-printed parts are good PR for us, so please leave the tagline if you
-can.}
-
-Headers may be completely removed by setting them to false.
-
-@example
-\header @{
- tagline = ##f
- composer = ##f
-@}
-@end example
-
-
-@node Custom titles
-@subsection Custom titles
-
-A more advanced option is to change the definitions of the following
-variables in the @code{\paper} block. The init file
-@file{ly/titling-init.ly} lists the default layout.
-
-@table @code
-@funindex bookTitleMarkup
-@item bookTitleMarkup
- This is the title added at the top of the entire output document.
-Typically, it has the composer and the title of the piece
-
-@funindex scoreTitleMarkup
-@item scoreTitleMarkup
- This is the title put over a @code{\score} block. Typically, it has
-the name of the movement (@code{piece} field).
-
-@funindex oddHeaderMarkup
-@item oddHeaderMarkup
- This is the page header for odd-numbered pages.
-
-@funindex evenHeaderMarkup
-@item evenHeaderMarkup
- This is the page header for even-numbered pages. If unspecified,
- the odd header is used instead.
-
- By default, headers are defined such that the page number is on the
- outside edge, and the instrument is centered.
-
-@funindex oddFooterMarkup
-@item oddFooterMarkup
- This is the page footer for odd-numbered pages.
-
-@funindex evenFooterMarkup
-@item evenFooterMarkup
- This is the page footer for even-numbered pages. If unspecified,
- the odd header is used instead.
-
- By default, the footer has the copyright notice on the first, and
- the tagline on the last page.
-@end table
-
-
-@cindex \paper
-@cindex header
-@cindex footer
-@cindex page layout
-@cindex titles
-
-The following definition will put the title flush left, and the
-composer flush right on a single line.
-
-@verbatim
-\paper {
- bookTitleMarkup = \markup {
- \fill-line {
- \fromproperty #'header:title
- \fromproperty #'header:composer
- }
- }
-}
-@end verbatim
-
-
-
@node MIDI output
@section MIDI output
that are off or accidentals that were mistyped stand out very much
when listening to the MIDI output.
-@refbugs
+@knownissues
Many musically interesting effects, such as swing, articulation,
slurring, etc., are not translated to midi.
* Creating MIDI files::
* MIDI block::
* MIDI instrument names::
+* What goes into the MIDI? FIXME::
@end menu
@node Creating MIDI files
The tempo can be specified using the @code{\tempo} command within the
actual music, see @ref{Metronome marks}. An alternative, which does not
result in a metronome mark in the printed score, is shown in the example
-above. In this example the tempo of quarter notes is set to 72 beats per
+above. In this example the tempo of quarter notes is set to 72 beats per
minute.
This kind of tempo
-specification can not take dotted note lengths as an argument. In this
-case, break the dotted notes into smaller units. For example, a tempo
+specification can not take dotted note lengths as an argument. In this
+case, break the dotted notes into smaller units. For example, a tempo
of 90 dotted quarter notes per minute can be specified as 270 eighth
notes per minute
marks translate to a fixed fraction of the available MIDI volume
range, crescendi and decrescendi make the volume vary linearly between
their two extremes. The fractions can be adjusted by
-@code{dynamicAbsoluteVolumeFunction} in @internalsref{Voice} context.
+@code{dynamicAbsoluteVolumeFunction} in @rinternals{Voice} context.
For each type of MIDI instrument, a volume range can be defined. This
gives a basic equalizer control, which can enhance the quality of
the MIDI output remarkably. The equalizer can be controlled by
\context @{
\Voice
\remove "Dynamic_performer"
- \remove "Span_dynamic_performer"
@}
@}
@end example
-@refbugs
+@knownissues
Unterminated (de)crescendos will not render properly in the midi file,
resulting in silent passages of music. The workaround is to explicitly
will.
+MIDI output is only created when the @code{\midi} command is within
+a @code{\score} block. If you put it within an explicitly instantiated
+context ( i.e. @code{\new Score} ) the file will fail. To solve this,
+enclose the @code{\new Score} and the @code{\midi} in a @code{\score} block.
+
+@example
+\score @{
+ \new Score @{ @dots{}notes@dots{} @}
+ \midi
+@}
+@end example
+
+
@node MIDI block
@subsection MIDI block
@cindex MIDI block
The MIDI block is analogous to the layout block, but it is somewhat
-simpler. The @code{\midi} block is similar to @code{\layout}. It can contain
+simpler. The @code{\midi} block is similar to @code{\layout}. It can contain
context definitions.
instrument is used.
-@c Yes, this is a cop-out; this info doesn't belong in the Scheme
-@c chapter, but I'm not certain where to stick it.
-@c I think I'll eventually split this chapter into a "paper/layout"
-@c chapter and a "misc issues" chapter. -gp
-@node Displaying LilyPond notation
-@section Displaying LilyPond notation
-
-@funindex \displayLilyMusc
-Displaying a music expression in LilyPond notation can be
-done using the music function @code{\displayLilyMusic}. For example,
+@node What goes into the MIDI? FIXME
+@subsection What goes into the MIDI? FIXME
-@example
-@{
- \displayLilyMusic \transpose c a, @{ c e g a bes @}
-@}
-@end example
-
-will display
+@menu
+* Repeats and MIDI::
+@end menu
-@example
-@{ a, cis e fis g @}
-@end example
+@node Repeats and MIDI
+@subsubsection Repeats and MIDI
+
+@cindex expanding repeats
+@funindex \unfoldRepeats
+
+With a little bit of tweaking, all types of repeats can be present
+in the MIDI output. This is achieved by applying the
+@code{\unfoldRepeats} music function. This function changes all
+repeats to unfold repeats.
+
+@lilypond[quote,verbatim,fragment,line-width=8.0\cm]
+\unfoldRepeats {
+ \repeat tremolo 8 {c'32 e' }
+ \repeat percent 2 { c''8 d'' }
+ \repeat volta 2 {c'4 d' e' f'}
+ \alternative {
+ { g' a' a' g' }
+ {f' e' d' c' }
+ }
+}
+\bar "|."
+@end lilypond
-By default, LilyPond will print these messages to the console along
-with all the other messages. To split up these messages and save
-the results of @code{\display@{STUFF@}}, redirect the output to
-a file.
+When creating a score file using @code{\unfoldRepeats} for MIDI,
+it is necessary to make two @code{\score} blocks: one for MIDI
+(with unfolded repeats) and one for notation (with volta, tremolo,
+and percent repeats). For example,
@example
-lilypond file.ly >display.txt
+\score @{
+ @var{..music..}
+ \layout @{ .. @}
+@}
+\score @{
+ \unfoldRepeats @var{..music..}
+ \midi @{ .. @}
+@}
@end example
-@node Skipping corrected music
-@section Skipping corrected music
-
-
-@funindex skipTypesetting
-@funindex showLastLength
-
-When entering or copying music, usually only the music near the end (where
-you
-are adding notes) is interesting to view and correct. To speed up
-this correction process, it is possible to skip typesetting of all but
-the last few measures. This is achieved by putting
-
-@verbatim
-showLastLength = R1*5
-\score { ... }
-@end verbatim
-
-@noindent
-in your source file. This will render only the last 5 measures
-(assuming 4/4 time signature) of every @code{\score} in the input
-file. For longer pieces, rendering only a small part is often an order
-of magnitude quicker than rendering it completely
-
-Skipping parts of a score can be controlled in a more fine-grained
-fashion with the property @code{Score.skipTypesetting}. When it is
-set, no typesetting is performed at all.
-
-This property is also used to control output to the MIDI file. Note that
-it skips all events, including tempo and instrument changes. You have
-been warned.
-
-@lilypond[quote,fragment,ragged-right,verbatim]
-\relative c'' {
- c8 d
- \set Score.skipTypesetting = ##t
- e e e e e e e e
- \set Score.skipTypesetting = ##f
- c d b bes a g c2 }
-@end lilypond
-
-In polyphonic music, @code{Score.skipTypesetting} will affect all
-voices and staves, saving even more time.
+@node other midi
+@section other midi
+Micro tones are also exported to the MIDI file.
+Figured bass has no effect on MIDI.
projects / lilypond.git / blobdiff