@node Editorial annotations
@section Editorial annotations
-@lilypondfile[ragged-right,line-width=16\cm,staffsize=16,quote]
-{editorial-headword.ly}
+@lilypondfile[quote]{editorial-headword.ly}
+
+This section discusses the various ways to change the appearance of
+notes and add analysis or educational emphasis.
@menu
* Inside the staff::
@node Inside the staff
@subsection Inside the staff
+This section discusses how to add emphasis to elements that are
+inside the staff.
@menu
* Selecting notation font size::
@end menu
@node Selecting notation font size
-@subsubsection Selecting notation font size
+@unnumberedsubsubsec Selecting notation font size
@cindex font size
@cindex font size, selecting
@cindex selecting font size
-The easiest method of setting the font size of any context is by
-setting the @code{fontSize} property.
+The font size of notation elements may be altered. It does not
+change the size of variable symbols, such as beams or slurs.
@lilypond[quote,fragment,relative=2,verbatim,ragged-right]
-c4
-\set fontSize = #-4
-c f
-\set fontSize = #3
-g8 a
+\huge
+c4.-> d8---3
+\large
+c4.-> d8---3
+\normalsize
+c4.-> d8---3
+\small
+c4.-> d8---3
+\tiny
+c4.-> d8---3
+\normalsize
+c2
@end lilypond
-@noindent
-It does not change the size of variable symbols, such as beams or
-slurs.
-
@cindex font size scaling
-Internally, the @code{fontSize} context property will cause the
-@code{font-size} property to be set in all layout objects. The
-value of @code{font-size} is a number indicating the size relative
-to the standard size for the current staff height. Each step up
-is an increase of approximately 12% of the font size. Six steps
-is exactly a factor two. The Scheme function @code{magstep}
-converts a @code{font-size} number to a scaling factor. The
-@code{font-size} property can also be set directly, so that only
-certain layout objects are affected.
+Internally, this sets the @code{fontSize} property. This in turns
+causes the @code{font-size} property to be set in all layout
+objects. The value of @code{font-size} is a number indicating the
+size relative to the standard size for the current staff height.
+Each step up is an increase of approximately 12% of the font size.
+Six steps is exactly a factor two. The Scheme function
+@code{magstep} converts a @code{font-size} number to a scaling
+factor. The @code{font-size} property can also be set directly,
+so that only certain layout objects are affected.
@lilypond[quote,fragment,relative=2,verbatim,ragged-right]
-c4
+\set fontSize = #3
+c4.-> d8---3
\override NoteHead #'font-size = #-4
-c f
-\override NoteHead #'font-size = #3
-g8 a
+c4.-> d8---3
+\override Script #'font-size = #2
+c4.-> d8---3
+\override Stem #'font-size = #-5
+c4.-> d8---3
@end lilypond
@cindex standard font size
@code{font-size} equals 0), depends on the standard staff height.
For a 20pt staff, a 10pt font is selected.
-The @code{font-size} property can only be set on layout objects that
-use fonts. These are the ones supporting the @code{font-interface}
-layout interface.
+The @code{font-size} property can only be set on layout objects
+that use fonts. These are the ones supporting the
+@code{font-interface} layout interface.
@predefined
-The following commands set @code{fontSize} for the current voice:
-
@funindex \tiny
@code{\tiny},
@funindex \small
@code{\small},
@funindex \normalsize
-@code{\normalsize}.
+@code{\normalsize},
+@funindex \large
+@code{\large},
+@funindex \huge
+@code{\huge}.
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
-Internals Reference: @internalsref{font-interface}.
+Internals Reference:
+@internalsref{font-interface}.
@node Fingering instructions
-@subsubsection Fingering instructions
+@unnumberedsubsubsec Fingering instructions
@cindex fingering
@cindex finger change
c4-1 d-2 f-4 e-3
@end lilypond
-Use markup texts for finger changes.
+Markup texts may be used for finger changes.
@lilypond[quote,verbatim,ragged-right,fragment,relative=2]
c4-1 d-2 f-4 c^\markup { \finger "2 - 3" }
< c-1 e-2 g-3 b-5 >2 < d-1 f-2 a-3 c-5 >
@end lilypond
+Fingering instructions may be manually placed above or below the
+staff, see @ref{Controlling direction and placement}.
@snippets
-@code{fingeringOrientations} are used to control where the fingering
-numbers are placed.
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
+{controlling-the-placement-of-chord-fingerings.ly}
-@lilypond[quote,verbatim,ragged-right,fragment,relative=2]
-\set fingeringOrientations = #'(left)
-<c-1 e-3 a-5 > 4
-\set fingeringOrientations = #'(down)
-<c-1 e-3 a-5 >
-\set fingeringOrientations = #'(right)
-<c-1 e-3 a-5 >
-\set fingeringOrientations = #'(up)
-<c-1 e-3 a-5 >
-\set fingeringOrientations = #'(left down)
-<c-1 e-3 a-5 > 2
-\set fingeringOrientations = #'(up right down)
-<c-1 e-3 a-5 >
-@end lilypond
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Notation Reference:
+@ref{Controlling direction and placement}
+
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
-Internals Reference: @internalsref{Fingering}.
+Internals Reference:
+@internalsref{Fingering}.
@node Hidden notes
-@subsubsection Hidden notes
+@unnumberedsubsubsec Hidden notes
@cindex Hidden notes
@cindex Invisible notes
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
@node Coloring objects
-@subsubsection Coloring objects
+@unnumberedsubsubsec Coloring objects
@cindex colored objects
@cindex colors
\set Staff.instrumentName = \markup {
\with-color #(x11-color 'navy) "Clarinet"
}
-gis4 a
+
+gis8 a
\override Beam #'color = #(x11-color "medium turquoise")
gis a
\override Accidental #'color = #(x11-color 'DarkRed)
You can get exact RGB colors by specifying the rgb-color number.
@lilypond[quote,ragged-right,verbatim,fragment,relative=2]
-{
- \override Staff.StaffSymbol #'color = #(x11-color 'SlateBlue2)
- \set Staff.instrumentName = \markup {
- \with-color #(x11-color 'navy) "Clarinet"
- }
- \time 4/4
-
- %black
- \override Stem #'color = #(rgb-color 0 0 0)
- c4
- % white
- \override Stem #'color = #(rgb-color 1 1 1)
- d
- % dark blue
- \override Stem #'color = #(rgb-color 0 0 0.5)
- e
+\override Staff.StaffSymbol #'color = #(x11-color 'SlateBlue2)
+\set Staff.instrumentName = \markup {
+ \with-color #(x11-color 'navy) "Clarinet"
}
+
+%black
+\override Stem #'color = #(rgb-color 0 0 0)
+gis8 a
+% white
+\override Stem #'color = #(rgb-color 1 1 1)
+gis8 a
+% dark blue
+\override Stem #'color = #(rgb-color 0 0 0.5)
+gis4 a
@end lilypond
@seealso
-Notation Reference: @ref{List of colors}, @ref{Objects connected to
+Notation Reference:
+@ref{List of colors}, @ref{Objects connected to
the input}.
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
@knownissues
An x11 color is not necessarily exactly the same shade as a
Notes in a chord cannot be colored with @code{\override}; use
-@code{\tweak} instead. See @ref{Objects connected to the input},
-for details.
+@code{\tweak} instead, see @ref{Objects connected to the input}.
@node Parentheses
-@subsubsection Parentheses
+@unnumberedsubsubsec Parentheses
@cindex ghost notes
@cindex notes, ghost
parenthesize a single note it must be enclosed with @code{<>} as
if it is a chord.
-@lilypond[relative=2,fragment,verbatim,ragged-right]
+FIXME: after 2.11.44 is out,
+@c \parenthesize c4-. \parenthesize r4 \parenthesize <c e g>4->
+
+@lilypond[quote,relative=2,fragment,verbatim,ragged-right]
c2 < \parenthesize d>
-<\parenthesize e> d
@end lilypond
Non-note objects may be parenthesized as well.
-@lilypond[relative=2,fragment,verbatim,ragged-right]
-< c \parenthesize d g >2-\parenthesize -. d
-g < c, \parenthesize fis >
+@lilypond[quote,relative=2,fragment,verbatim,ragged-right]
+< c d g >2-\parenthesize -. d
@end lilypond
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
+
+@knownissues
+
+Rests cannot be parenthesized.
@node Stems
-@subsubsection Stems
+@unnumberedsubsubsec Stems
@cindex stem
@cindex stem, down
@cindex stem, neutral
-To change the direction of stems on the center line of the staff, use
-
-@lilypond[quote,ragged-right,fragment,relative=2,verbatim]
-a4 b c b
-\override Stem #'neutral-direction = #up
-a4 b c b
-\override Stem #'neutral-direction = #down
-a4 b c b
-@end lilypond
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
+{default-direction-of-stems-on-the-center-line-of-the-staff.ly}
@seealso
+Notation Reference:
+@ref{Controlling direction and placement}.
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
@node Outside the staff
@subsection Outside the staff
+This section discusses how to add emphasis to elements in the staff
+from outside of the staff.
@menu
* Balloon help::
@end menu
@node Balloon help
-@subsubsection Balloon help
+@unnumberedsubsubsec Balloon help
Elements of notation can be marked and named with the help of a
square balloon. The primary purpose of this feature is to explain
notation.
-The following example demonstrates its use.
-
@lilypond[quote,verbatim,fragment,ragged-right,relative=2]
\new Voice \with { \consists "Balloon_engraver" }
- {
- \time 2/4
- \balloonGrobText #'Stem #'(3 . 4) \markup { "I'm a Stem" }
- a'8
- <c' g'-\balloonText #'(-2 . -2) \markup { "I'm a note head" }
-c''>4.
- }
+{
+ \balloonGrobText #'Stem #'(3 . 4) \markup { "I'm a Stem" }
+ a8
+ \balloonGrobText #'Rest #' (-4 . -4) \markup { "I'm a rest" }
+ r
+ <c, g'-\balloonText #'(-2 . -2) \markup { "I'm a note head" } c>2.
+}
@end lilypond
There are two music functions, @code{balloonGrobText} and
-@code{balloonText}; The former is used like \once \override to
-attach text to any grob, and the latter is used like \tweak,
+@code{balloonText}; The former is used like @code{\once \override} to
+attach text to any grob, and the latter is used like @code{ \tweak},
typically within chords, to attach text to an individual note.
@cindex balloon
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
-Internals Reference: @internalsref{text-balloon-interface}.
+Internals Reference:
+@internalsref{text-balloon-interface}.
@node Grid lines
-@subsubsection Grid lines
+@unnumberedsubsubsec Grid lines
Vertical lines can be drawn between staves synchronized with the
notes.
-@lilypond[ragged-right,quote,verbatim]
+@lilypond[quote,verbatim,ragged-right]
\layout {
\context {
\Staff
- \consists "Grid_point_engraver"
% sets up grids
- gridInterval = #(ly:make-moment 1 4)
+ \consists "Grid_point_engraver"
% this sets the grid interval to 1 quarternote (crotchet)
- }
+ gridInterval = #(ly:make-moment 1 4)
+ }
}
\new Score \with {
+ % by default this centers grid lines horizontally below and to the
+ % left side of the notehead, the grid lines extend from
+ % the middle lines of each staff
\consists "Grid_line_span_engraver"
- %% centers grid lines horizontally below note heads by default
- %the grid lines are aligned with the left side of the notehead
- \override NoteColumn #'X-offset = #-0.5
- % this moves them to the right half a staff space
-}
+ }
\new ChoirStaff <<
\new Staff {
- \stemUp
- \relative {
- c'4. d8 e8 f g4
+ \relative c'' {
+ \stemUp
+ c4. d8 e8 f g4
}
}
\new Staff {
- \override Score.GridLine #'extra-offset = #'( 0.0 . 1.0 )
- % by default the grid lines join the middle line of each staff,
- % this moves them up one staff space
- \stemDown
\clef bass
\relative c {
+ \stemDown
c4 g' f e
}
}
>>
@end lilypond
+@snippets
+
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc]
+{grid-lines-changing-their-appearance.ly}
+
+
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
@node Analysis brackets
-@subsubsection Analysis brackets
+@unnumberedsubsubsec Analysis brackets
@cindex brackets
@cindex phrasing brackets
@cindex note grouping bracket
Brackets are used in musical analysis to indicate structure in musical
-pieces. LilyPond supports a simple form of nested horizontal
-brackets. To use this, add the @code{Horizontal_bracket_engraver} to
-the @code{Staff} context. A bracket is started with
-@code{\startGroup} and closed with @code{\stopGroup}.
-
-@lilypond[quote,ragged-right,verbatim]
-\score {
- \relative c'' {
- c4\startGroup\startGroup
- c4\stopGroup
- c4\startGroup
- c4\stopGroup\stopGroup
+pieces. LilyPond supports a simple form of horizontal brackets.
+
+@lilypond[quote,verbatim,ragged-right]
+\layout {
+ \context {
+ \Staff \consists "Horizontal_bracket_engraver"
}
- \layout {
- \context {
- \Staff \consists "Horizontal_bracket_engraver"
- }
+}
+\relative c'' {
+ c2\startGroup
+ d\stopGroup
+}
+@end lilypond
+
+Analysis brackets may be nested.
+
+@lilypond[quote,verbatim,ragged-right]
+\layout {
+ \context {
+ \Staff \consists "Horizontal_bracket_engraver"
}
}
+\relative c'' {
+ c4\startGroup\startGroup
+ d4\stopGroup
+ e4\startGroup
+ d4\stopGroup\stopGroup
+}
@end lilypond
@seealso
-Snippets: @lsrdir{Editorial,Editorial-annotations}.
+Snippets:
+@lsrdir{Editorial,Editorial-annotations}.
-Internals Reference: @internalsref{HorizontalBracket},
-@internalsref{Horizontal_bracket_engraver}, @internalsref{Staff}.
+Internals Reference:
+@internalsref{HorizontalBracket},
+@internalsref{Horizontal_bracket_engraver},
+@internalsref{Staff}.
projects / lilypond.git / blobdiff