-@c -*-texinfo-*-
+@c -*- coding: utf-8; mode: texinfo; -*-
@node Changing defaults
@chapter Changing defaults
The purpose of LilyPond's design is to provide the finest output
-quality as a default. Nevertheless, it may happen that you need to
+quality as a default. Nevertheless, it may happen that you need to
change this default layout. The layout is controlled through a large
number of proverbial ``knobs and switches.'' This chapter does not
-list each and every knob. Rather, it outlines what groups of controls
+list each and every knob. Rather, it outlines what groups of controls
are available and explains how to lookup which knob to use for a
-certain effect.
+particular effect.
@cindex Program reference
The controls available for tuning are described in a separate
-document, the @internalsref{Program reference} manual. That manual
+document, the @internalsref{Program reference} manual. That manual
lists all different variables, functions and options available in
-LilyPond. It is written as a HTML document, which is available
-@uref{http://lilypond.org/doc/Documentation/user/out-www/lilypond-internals/,on-line},
+LilyPond. It is written as a HTML document, which is available
+@uref{http://@/lilypond@/.org/@/doc/@/Documentation/@/user/@/out@/-www/@/lilypond@/-internals/,on@/-line},
but is also included with the LilyPond documentation package.
There are three areas where the default settings may be changed:
@itemize @bullet
-@item Output: changing the appearance of individual
- objects. For example, changing stem directions, or the location of
- subscripts.
+@item
+Output: changing the appearance of individual
+objects. For example, changing stem directions or the location of
+subscripts.
-@item Context: changing aspects of the translation from music events to
- notation. For example, giving each staff a separate time signature.
+@item
+Context: changing aspects of the translation from music events to
+notation. For example, giving each staff a separate time signature.
-@item Global layout: changing the appearance of the spacing, line
- breaks and page dimensions.
+@item
+Global layout: changing the appearance of the spacing, line
+breaks, and page dimensions.
@end itemize
-Then, there are separate systems for typesetting text (like
-@emph{ritardando}) and selecting different fonts. This chapter also
+Then there are separate systems for typesetting text (like
+@emph{ritardando}) and selecting different fonts. This chapter also
discusses these.
Internally, LilyPond uses Scheme (a LISP dialect) to provide
infrastructure. Overriding layout decisions in effect accesses the
program internals, which requires Scheme input. Scheme elements are
introduced in a @code{.ly} file with the hash mark
-@code{#}.@footnote{@ref{Scheme tutorial} contains a a short tutorial
-on entering numbers, lists, strings and symbols in Scheme.}
+@code{#}.@footnote{@ref{Scheme tutorial} contains a short tutorial
+on entering numbers, lists, strings, and symbols in Scheme.}
@menu
* The \override command::
* Fonts::
* Text markup::
-* Global layout::
-* File structure::
@end menu
@node Interpretation contexts
@section Interpretation contexts
-When music is printed, a lot of notation elements must be added to the
+When music is printed, a lot of notational elements must be added to the
input, which is often bare bones. For example, compare the input and
output of the following example:
-@lilypond[verbatim,relative=2,fragment]
- cis4 cis2. g4
+@lilypond[quote,verbatim,relative=2,fragment]
+cis4 cis2. g4
@end lilypond
The input is rather sparse, but in the output, bar lines, accidentals,
-clef, and time signature are added. LilyPond @emph{interprets} the
-input. During this step, the musical information is inspected in time
-order, similar to reading a score from left to right. While reading,
-the program remembers where measure boundaries are, and what pitches
-need explicit accidentals. This information can be presented on
+clef, and time signature are added. LilyPond @emph{interprets} the
+input. During this step, the musical information is inspected in time
+order, similar to reading a score from left to right. While reading,
+the input, the program remembers where measure boundaries are, and what
+pitches need explicit accidentals. This information can be presented on
several levels. For example, the effect of an accidental is limited
-to a single stave, while a bar line must be synchronized across the
+to a single staff, while a bar line must be synchronized across the
entire score.
Within LilyPond, these rules and bits of information are grouped in
-so-called Contexts. Examples of context are @context{Voice},
+so-called Contexts. Examples of context are @context{Voice},
@context{Staff}, and @context{Score}. They are hierarchical, for
example, a @context{Staff} can contain many @context{Voice}s, and a
@context{Score} can contain many @context{Staff} contexts.
creating some notation objects and maintaining the associated
properties. So, the synchronization of bar lines is handled at
@context{Score} context. The @context{Voice} may introduce an
-accidentals and then the @context{Staff} context maintains the rule to
+accidental and then the @context{Staff} context maintains the rule to
show or suppress the accidental for the remainder of the measure.
For simple scores, contexts are created implicitly, and you need not
-be aware of them. For larger pieces, such as piano music, they must be
+be aware of them. For larger pieces, such as piano music, they must be
created explicitly to make sure that you get as many staves as you
need, and that they are in the correct order. For typesetting pieces
with specialized notation, it can be useful to modify existing or
-define new contexts.
+to define new contexts.
-Full description of all available contexts is in the program
+A complete description of all available contexts is in the program
reference, see
@ifhtml
@internalsref{Contexts}.
* Modifying context plug-ins::
* Layout tunings within contexts::
* Changing context default settings::
-* Defining new contexts::
+* Defining new contexts::
@end menu
@node Creating contexts
@subsection Creating contexts
For scores with only one voice and one staff, correct contexts are
-created automatically. For more complex scores, it is necessary to
-create them by hand. There are three commands which do this.
+created automatically. For more complex scores, it is necessary to
+create them by hand. There are three commands that do this.
The easiest command is @code{\new}, and it also the quickest to type.
It is prepended to a music expression, for example
@cindex Context, creating
@example
- \new @var{type} @var{music expression}
+\new @var{type} @var{music expression}
@end example
@noindent
where @var{type} is a context name (like @code{Staff} or
@code{Voice}). This command creates a new context, and starts
-interpreting @var{music expression} with that.
+interpreting the @var{music expression} with that.
A practical application of @code{\new} is a score with many
-staves. Each part that should be on its own staff, is preceded with
+staves. Each part that should be on its own staff, is preceded with
@code{\new Staff}.
-@lilypond[verbatim,relative=2,raggedright,fragment]
- << \new Staff { c4 c }
- \new Staff { d4 d }
- >>
+@lilypond[quote,verbatim,relative=2,raggedright,fragment]
+<< \new Staff { c4 c }
+ \new Staff { d4 d }
+>>
@end lilypond
@cindex @code{\context}
Like @code{\new}, the @code{\context} command also directs a music
-expression to a context object, but gives the context an extra name. The
+expression to a context object, but gives the context an extra name. The
syntax is
@example
- \context @var{type} = @var{id} @var{music}
+\context @var{type} = @var{id} @var{music}
@end example
This form will search for an existing context of type @var{type}
-called @var{id}. If that context does not exist yet, it is created.
-This is useful if the context is referred to later on. For example, when
+called @var{id}. If that context does not exist yet, it is created.
+This is useful if the context is referred to later on. For example, when
setting lyrics the melody is in a named context
@example
- \context Voice = "@b{tenor}" @var{music}
+\CONtext Voice = "@b{tenor}" @var{music}
@end example
@noindent
@noindent
Another possibility is funneling two different music expressions into
-one context. In the following example, articulations and notes are
+one context. In the following example, articulations and notes are
entered separately,
-@verbatim
-music = { c4 c4 }
-arts = { s4-. s4-> }
-@end verbatim
+@example
+music = @{ c4 c4 @}
+arts = @{ s4-. s4-> @}
+@end example
They are combined by sending both to the same @context{Voice} context,
-@verbatim
- << \new Staff \context Voice = "A" \music
- \context Voice = "A" \arts
- >>
-@end verbatim
-@lilypond[raggedright]
-music = { c4 c4 }
-arts = { s4-. s4-> }
- \relative c'' << \new Staff \context Voice = "A" \music
- \context Voice = "A" \arts
- >>
+@example
+<< \new Staff \context Voice = "A" \music
+ \context Voice = "A" \arts
+>>
+@end example
+@lilypond[quote,raggedright]
+music = { c4 c4 }
+arts = { s4-. s4-> }
+\relative c'' <<
+ \new Staff \context Voice = "A" \music
+ \context Voice = "A" \arts
+>>
@end lilypond
With this mechanism, it is possible to define an Urtext (original
-edition), with the option put several distinct articulations on the
+edition), with the option to put several distinct articulations on the
same notes.
@cindex @code{\context}
The third command for creating contexts is
@example
- \context @var{type} @var{music}
+\context @var{type} @var{music}
@end example
any context of type @var{type}, regardless of its given name.
This variant is used with music expressions that can be interpreted at
-several levels. For example, the @code{\applyoutput} command (see
-@ref{Running a function on all layout objects}). Without an explicit
-@code{\context}, it is usually is applied to @context{Voice}
+several levels. For example, the @code{\applyoutput} command (see
+@ref{Running a function on all layout objects}). Without an explicit
+@code{\context}, it is usually applied to @context{Voice}
@example
- \applyoutput #@var{function} % apply to Voice
+\applyoutput #@var{function} % apply to Voice
@end example
To have it interpreted at the @context{Score} or @context{Staff} level use
these forms
@example
- \context Score \applyoutput #@var{function}
- \context Staff \applyoutput #@var{function}
+\context Score \applyoutput #@var{function}
+\context Staff \applyoutput #@var{function}
@end example
@cindex changing properties
Each context can have different @emph{properties}, variables contained
-in that context. They can be changed during the interpretation step.
+in that context. They can be changed during the interpretation step.
This is achieved by inserting the @code{\set} command in the music,
-@quotation
- @code{\set } @var{context}@code{.}@var{prop}@code{ = #}@var{value}
-@end quotation
+@example
+\set @var{context}.@var{prop} = #@var{value}
+@end example
For example,
-@lilypond[verbatim,relative=2,fragment]
- R1*2
- \set Score.skipBars = ##t
- R1*2
+@lilypond[quote,verbatim,relative=2,fragment]
+R1*2
+\set Score.skipBars = ##t
+R1*2
@end lilypond
-This command skips measures that have no notes. The result is that
-multi rests are condensed. The value assigned is a Scheme object. In
+This command skips measures that have no notes. The result is that
+multi-rests are condensed. The value assigned is a Scheme object. In
this case, it is @code{#t}, the boolean True value.
If the @var{context} argument is left out, then the current bottom-most
context (typically @context{ChordNames}, @context{Voice}, or
@context{Lyrics}) is used. In this example,
-@lilypond[verbatim,relative=2,fragment]
- c8 c c c
- \set autoBeaming = ##f
- c8 c c c
+@lilypond[quote,verbatim,relative=2,fragment]
+c8 c c c
+\set autoBeaming = ##f
+c8 c c c
@end lilypond
@noindent
the @var{context} argument to @code{\set} is left out, so automatic
-beaming is switched off in the current @internalsref{Voice}.
+beaming is switched off in the current @internalsref{Voice}. Note that
+the bottom-most context does not always contain the property that you
+wish to change -- for example, attempting to set the @code{skipBars}
+property (of the bottom-most context, in this case @code{Voice}) will
+have no effect.
+
+@lilypond[quote,verbatim,relative=2,fragment]
+R1*2
+\set skipBars = ##t
+R1*2
+@end lilypond
Contexts are hierarchical, so if a bigger context was specified, for
example @context{Staff}, then the change would also apply to all
-@context{Voice}s in the current stave. The change is applied
+@context{Voice}s in the current stave. The change is applied
`on-the-fly', during the music, so that the setting only affects the
second group of eighth notes.
@cindex @code{\unset}
There is also an @code{\unset} command,
-@quotation
- @code{\unset }@var{context}@code{.}@var{prop}
-@end quotation
+@example
+\unset @var{context}.@var{prop}
+@end example
@noindent
-which removes the definition of @var{prop}. This command removes
+which removes the definition of @var{prop}. This command removes
the definition only if it is set in @var{context}, so
@example
- \set Staff.autoBeaming = ##f
+\set Staff.autoBeaming = ##f
@end example
@noindent
-introduces a property setting at @code{Staff} level. The setting also
-applies to the current @code{Voice}. However,
+introduces a property setting at @code{Staff} level. The setting also
+applies to the current @code{Voice}. However,
@example
- \unset Voice.autoBeaming
+\unset Voice.autoBeaming
@end example
@noindent
-does not have any effect. To cancel this setting, the @code{\unset}
-must be specified on the same level as the original @code{\set}. In
+does not have any effect. To cancel this setting, the @code{\unset}
+must be specified on the same level as the original @code{\set}. In
other words, undoing the effect of @code{Staff.autoBeaming = ##f}
requires
@example
- \unset Staff.autoBeaming
+\unset Staff.autoBeaming
@end example
Like @code{\set}, the @var{context} argument does not have to be
specified for a bottom context, so the two statements
@example
- \set Voice.autoBeaming = ##t
- \set autoBeaming = ##t
+\set Voice.autoBeaming = ##t
+\set autoBeaming = ##t
@end example
@noindent
are equivalent.
+@cindex \once
Settings that should only apply to a single time-step can be entered
with @code{\once}, for example in
-@lilypond[verbatim,relative=2,fragment]
- c4
- \once \set fontSize = #4.7
- c4
- c4
+@lilypond[quote,verbatim,relative=2,fragment]
+c4
+\once \set fontSize = #4.7
+c4
+c4
@end lilypond
the property @code{fontSize} is unset automatically after the second
A full description of all available context properties is in the
program reference, see
@ifhtml
-@internalsref{Tunable-context-properties}.
+@internalsref{Tunable context properties}.
@end ifhtml
@ifnothtml
Translation @arrow{} Tunable context properties.
Notation contexts (like Score and Staff) not only store properties,
they also contain plug-ins, called ``engravers'' that create notation
-elements. For example, the Voice context contains a
+elements. For example, the Voice context contains a
@code{Note_head_engraver} and the Staff context contains a
@code{Key_signature_engraver}.
lists the engravers used for that context.
-It can be useful to shuffle around these plug-ins. This is done by
+It can be useful to shuffle around these plug-ins. This is done by
starting a new context, with @code{\new} or @code{\context}, and
modifying it like this,
@example
- \new @var{context} \with @{
- \consists @dots{}
- \consists @dots{}
- \remove @dots{}
- \remove @dots{}
- @emph{etc.}
- @}
- @var{..music..}
+\new @var{context} \with @{
+ \consists @dots{}
+ \consists @dots{}
+ \remove @dots{}
+ \remove @dots{}
+ @emph{etc.}
+@}
+@emph{..music..}
@end example
-where the @dots{} should be the name of an engraver. Here is a simple
+@noindent
+where the @dots{} should be the name of an engraver. Here is a simple
example which removes @code{Time_signature_engraver} and
@code{Clef_engraver} from a @code{Staff} context,
-@lilypond[relative=1, verbatim,fragment]
+@lilypond[quote,relative=1,verbatim,fragment]
<< \new Staff {
f2 g
}
>>
@end lilypond
-In the second stave there are no time signature or clef symbols. This
+In the second staff there are no time signature or clef symbols. This
is a rather crude method of making objects disappear since it will affect
-the entire staff. The spacing is adversely influenced too. A more
-sophisticated methods of blanking objects is shown in @ref{Common
-tweaks}.
+the entire staff. The spacing is adversely influenced too. A more
+sophisticated method of blanking objects is shown in @ref{Common tweaks}.
The next example shows a practical application. Bar lines and time
signatures are normally synchronized across the score. This is done
-by the @code{Timing_engraver}. This plug-in keeps an administration of
-time signature, location within the measure, etc. By moving the
+by the @code{Timing_engraver}. This plug-in keeps an administration of
+time signature, location within the measure, etc. By moving the
@code{Timing_engraver} engraver from @code{Score} to @code{Staff}
context, we can have a score where each staff has its own time
signature.
@cindex polymetric scores
+@cindex Time signatures, multiple
-
-@lilypond[relative=1,raggedright,verbatim,fragment]
+@lilypond[quote,relative=1,raggedright,verbatim,fragment]
\new Score \with {
\remove "Timing_engraver"
} <<
@subsection Layout tunings within contexts
Each context is responsible for creating certain types of graphical
-objects. The settings used for printing these objects are also stored by
-context. By changing these settings, the appearance of objects can be
+objects. The settings used for printing these objects are also stored by
+context. By changing these settings, the appearance of objects can be
altered.
The syntax for this is
@example
- \override @var{context}.@var{name}@code{ #'}@var{property} = #@var{value}
+\override @var{context}.@var{name} #'@var{property} = #@var{value}
@end example
Here @var{name} is the name of a graphical object, like @code{Stem} or
@code{NoteHead}, and @var{property} is an internal variable of the
-formatting system (`grob property' or `layout property'). The latter is a
-symbol, so it must be quoted. The subsection @ref{Constructing a
+formatting system (`grob property' or `layout property'). The latter is a
+symbol, so it must be quoted. The subsection @ref{Constructing a
tweak} explains what to fill in for @var{name}, @var{property}, and
-@var{value}. Here we only discuss functionality of this command.
+@var{value}. Here we only discuss the functionality of this command.
The command
@verbatim
- \override Staff.Stem #'thickness = #4.0
+\override Staff.Stem #'thickness = #4.0
@end verbatim
@noindent
makes stems thicker (the default is 1.3, with staff line thickness as a
-unit). Since the command specifies @context{Staff} as context, it only
-applies to the current staff. Other staves will keep their normal
+unit). Since the command specifies @context{Staff} as context, it only
+applies to the current staff. Other staves will keep their normal
appearance. Here we see the command in action:
-@lilypond[verbatim,relative=2,fragment]
- c4
- \override Staff.Stem #'thickness = #4.0
- c4
- c4
- c4
+@lilypond[quote,verbatim,relative=2,fragment]
+c4
+\override Staff.Stem #'thickness = #4.0
+c4
+c4
+c4
@end lilypond
The @code{\override} command changes the definition of the @code{Stem}
-within the current @context{Staff}. After the command is interpreted
+within the current @context{Staff}. After the command is interpreted
all stems are thickened.
Analogous to @code{\set}, the @var{context} argument may be left out,
causing it to default to @context{Voice}, and adding @code{\once} applies
the change during one timestep only
-@lilypond[fragment,verbatim,relative=2]
- c4
- \once \override Stem #'thickness = #4.0
- c4
- c4
+@lilypond[quote,fragment,verbatim,relative=2]
+c4
+\once \override Stem #'thickness = #4.0
+c4
+c4
@end lilypond
The @code{\override} must be done before the object is
-started. Therefore, when altering @emph{Spanner} objects, like slurs or
+started. Therefore, when altering @emph{Spanner} objects, like slurs or
beams, the @code{\override} command must be executed at the moment when
-the object is created. In this example,
+the object is created. In this example,
-@lilypond[fragment,verbatim,relative=2]
- \override Slur #'thickness = #3.0
- c8[( c
- \override Beam #'thickness = #0.6
- c8 c])
+@lilypond[quote,fragment,verbatim,relative=2]
+\override Slur #'thickness = #3.0
+c8[( c
+\override Beam #'thickness = #0.6
+c8 c])
@end lilypond
@noindent
-the slur is fatter but the beam is not. This is because the command for
-@code{Beam} comes after the Beam is started. Therefore it has no effect.
+the slur is fatter but the beam is not. This is because the command for
+@code{Beam} comes after the Beam is started. Therefore it has no effect.
Analogous to @code{\unset}, the @code{\revert} command for a context
-undoes a @code{\override} command; like with @code{\unset}, it only
-affects settings that were made in the same context. In other words, the
+undoes an @code{\override} command; like with @code{\unset}, it only
+affects settings that were made in the same context. In other words, the
@code{\revert} in the next example does not do anything.
-@verbatim
- \override Voice.Stem #'thickness = #4.0
- \revert Staff.Stem #'thickness
-@end verbatim
+@example
+\override Voice.Stem #'thickness = #4.0
+\revert Staff.Stem #'thickness
+@end example
Internals: @internalsref{OverrideProperty}, @internalsref{RevertProperty},
@internalsref{PropertySet}, @internalsref{All-backend-properties}, and
-@internalsref{All-layout-objects}.
+@internalsref{All layout objects}.
@refbugs
@subsection Changing context default settings
The adjustments of the previous subsections (@ref{Changing context
-properties on the fly}, @ref{Modifying context plug-ins} and
-@ref{Layout tunings within contexts}) can also be entered separate
-from the music, in the @code{\paper} block,
+properties on the fly}, @ref{Modifying context plug-ins}, and
+@ref{Layout tunings within contexts}) can also be entered separately
+from the music, in the @code{\layout} block,
@example
-\paper @{
+\layout @{
@dots{}
\context @{
\Staff
\set fontSize = #-2
- \override Stem #'thickness
+ \override Stem #'thickness = #4.0
\remove "Time_signature_engraver"
@}
@}
Here
@example
- \Staff
+\Staff
@end example
@noindent
The statements
@example
- \set fontSize = #-2
- \override Stem #'thickness
- \remove "Time_signature_engraver"
+\set fontSize = #-2
+\override Stem #'thickness = #4.0
+\remove "Time_signature_engraver"
@end example
@noindent
Other contexts can be modified analogously.
-The @code{\set} keyword is optional within the @code{\paper} block, so
+The @code{\set} keyword is optional within the @code{\layout} block, so
@example
\context @{
It is not possible to collect context changes in a variable, and apply
them to one @code{\context} definition by referring to that variable.
+The @code{\RemoveEmptyStaffContext} will override your current
+@code{\Staff} variable. If you wish to change the defaults for a
+staff that uses @code{\RemoveEmptyStaffContext}, you must do so
+after calling @code{\RemoveemptyStaffContext}, ie
+
+@example
+\layout @{
+ \context @{
+ \RemoveEmptyStaffContext
+
+ \override Stem #'thickness = #4.0
+ @}
+@}
+@end example
-@node Defining new contexts
-@subsection Defining new contexts
+
+@node Defining new contexts
+@subsection Defining new contexts
Specific contexts, like @context{Staff} and @code{Voice}, are made of
simple building blocks, and it is possible to compose engraver
The next example shows how to build a different type of
@context{Voice} context from scratch. It will be similar to
-@code{Voice}, but print centered slash noteheads only. It can be used
+@code{Voice}, but prints centered slash noteheads only. It can be used
to indicate improvisation in Jazz pieces,
-@lilypond[raggedright]
- \paper { \context {
- \name ImproVoice
- \type "Engraver_group_engraver"
- \consists "Note_heads_engraver"
- \consists "Text_engraver"
- \consists Pitch_squash_engraver
- squashedPosition = #0
- \override NoteHead #'style = #'slash
- \override Stem #'transparent = ##t
- \alias Voice
- }
- \context { \Staff
- \accepts "ImproVoice"
- }}
-
+@lilypond[quote,raggedright]
+\layout { \context {
+ \name ImproVoice
+ \type "Engraver_group_engraver"
+ \consists "Note_heads_engraver"
+ \consists "Text_engraver"
+ \consists Pitch_squash_engraver
+ squashedPosition = #0
+ \override NoteHead #'style = #'slash
+ \override Stem #'transparent = ##t
+ \alias Voice
+}
+\context { \Staff
+ \accepts "ImproVoice"
+}}
\relative c'' {
- a4 d8 bes8 \new ImproVoice { c4^"ad lib" c
- c4 c^"undress" c_"while playing :)" c }
- a1
+ a4 d8 bes8 \new ImproVoice { c4^"ad lib" c
+ c4 c^"undress" c_"while playing :)" c }
+ a1
}
@end lilypond
These settings are again done within a @code{\context} block inside a
-@code{\paper} block,
+@code{\layout} block,
@example
- \paper @{
- \context @{
- @dots{}
- @}
+\layout @{
+ \context @{
+ @dots{}
@}
+@}
@end example
In the following discussion, the example input shown should go on the
@dots{} in the previous fragment.
-First, name the context gets a name. Instead of @context{Voice} it
+First, the context gets a name. Instead of @context{Voice} it
will be called @context{ImproVoice},
-@verbatim
- \name ImproVoice
-@end verbatim
+@example
+\name ImproVoice
+@end example
Since it is similar to the @context{Voice}, we want commands that work
-on (existing) @context{Voice}s to remain working. This is achieved by
+on (existing) @context{Voice}s to remain working. This is achieved by
giving the new context an alias @context{Voice},
-@verbatim
- \alias Voice
-@end verbatim
+@example
+\alias Voice
+@end example
The context will print notes, and instructive texts
-@verbatim
- \consists Note_heads_engraver
- \consists Text_engraver
-@end verbatim
+@example
+\consists Note_heads_engraver
+\consists Text_engraver
+@end example
but only on the center line,
-@verbatim
- \consists Pitch_squash_engraver
- squashedPosition = #0
-@end verbatim
+@example
+\consists Pitch_squash_engraver
+squashedPosition = #0
+@end example
The @internalsref{Pitch_squash_engraver} modifies note heads (created
by @internalsref{Note_heads_engraver}) and sets their vertical
-position to the value of @code{squashedPosition}, in this case
-@code{0}, the center line.
+position to the value of @code{squashedPosition}, in this case@tie{}@code{0},
+the center line.
-The notes look like a slash, without a stem,
+The notes look like a slash, without a stem,
-@verbatim
- \override NoteHead #'style = #'slash
- \override Stem #'transparent = ##t
-@end verbatim
+@example
+\override NoteHead #'style = #'slash
+\override Stem #'transparent = ##t
+@end example
All these plug-ins have to cooperate, and this is achieved with a
This should always be @internalsref{Engraver_group_engraver},
@example
- \type "Engraver_group_engraver"
+\type "Engraver_group_engraver"
@end example
-Putting together, we get
+Put together, we get
-@verbatim
- \context {
- \name ImproVoice
- \type "Engraver_group_engraver"
- \consists "Note_heads_engraver"
- \consists "Text_engraver"
- \consists Pitch_squash_engraver
- squashedPosition = #0
- \override NoteHead #'style = #'slash
- \override Stem #'transparent = ##t
- \alias Voice
- }
-@end verbatim
+@example
+\context @{
+ \name ImproVoice
+ \type "Engraver_group_engraver"
+ \consists "Note_heads_engraver"
+ \consists "Text_engraver"
+ \consists Pitch_squash_engraver
+ squashedPosition = #0
+ \override NoteHead #'style = #'slash
+ \override Stem #'transparent = ##t
+ \alias Voice
+@}
+@end example
-Contexts form hierarchies. We want to hang the @context{ImproVoice}
-under @context{Staff}, just like normal @code{Voice}s. Therefore, we
+Contexts form hierarchies. We want to hang the @context{ImproVoice}
+under @context{Staff}, just like normal @code{Voice}s. Therefore, we
modify the @code{Staff} definition with the @code{\accepts}
command,@footnote{The opposite of @code{\accepts} is @code{\denies},
-which is sometimes when reusing existing context definitions. }
+which is sometimes needed when reusing existing context definitions.}
-@verbatim
- \context {
- \Staff
- \accepts ImproVoice
- }
-@end verbatim
+@example
+\context @{
+ \Staff
+ \accepts ImproVoice
+@}
+@end example
-Putting both into a @code{\paper} block, like
+Putting both into a @code{\layout} block, like
@example
- \paper @{
- \context @{
- \name ImproVoice
- @dots{}
- @}
+\layout @{
+ \context @{
+ \name ImproVoice
+ @dots{}
+ @}
\context @{
\Staff
\accepts "ImproVoice"
Then the output at the start of this subsection can be entered as
-@verbatim
-\relative c'' {
- a4 d8 bes8
- \new ImproVoice {
- c4^"ad lib" c
- c4 c^"undress"
- c c_"while playing :)"
- }
- a1
-}
-@end verbatim
+@example
+\relative c'' @{
+ a4 d8 bes8
+ \new ImproVoice @{
+ c4^"ad lib" c
+ c4 c^"undress"
+ c c_"while playing :)"
+ @}
+ a1
+@}
+@end example
@section The \override command
In the previous section, we have already touched on a command that
-changes layout details, the @code{\override} command. In this section,
-we will look at in more detail how to use the command in practice.
-First, we will give a a few versatile commands, which are sufficient
-for many situations. The next section will discuss general use of
+changes layout details: the @code{\override} command. In this section,
+we will look in more detail at how to use the command in practice.
+First, we will give a few versatile commands that are sufficient
+for many situations. The next section will discuss the general use of
@code{\override}.
@node Common tweaks
@subsection Common tweaks
+@c Should we point at ly/property-init.ly ? -gp
Some overrides are so common that predefined commands are provided as
-a short-cut, for example, @code{\slurUp} and @code{\stemDown}. These
+short-cuts, for example, @code{\slurUp} and @code{\stemDown}. These
commands are described in
@ifhtml
the
@end ifhtml
-@ref{Notation manual}, under the sections for slurs and stems
+@c @ref{Notation manual},
+Notation manual
+@c FIXME
+under the sections for slurs and stems
respectively.
The exact tuning possibilities for each type of layout object are
documented in the program reference of the respective
-object. However, many layout objects share properties, which can be
+object. However, many layout objects share properties, which can be
used to apply generic tweaks. We mention a few of these:
@itemize @bullet
@item The @code{extra-offset} property, which
@cindex @code{extra-offset}
-has a pair of numbers as value, moves around objects in the printout.
+has a pair of numbers as value, moves objects around in the printout.
The first number controls left-right movement; a positive number will
move the object to the right. The second number controls up-down
movement; a positive number will move it higher. The units of these
@cindex setting object properties
-@lilypond[fragment,relative=1,verbatim]
+@lilypond[quote,fragment,relative=1,verbatim]
\stemUp
f-5
\once \override Fingering
@item
Setting the @code{transparent} property will cause an object to be printed
in `invisible ink': the object is not printed, but all its other
-behavior is retained. The object still takes up space, it takes part in
-collisions, and slurs, and ties and beams can be attached to it.
+behavior is retained. The object still takes up space, it takes part in
+collisions, and slurs, ties, and beams can be attached to it.
@cindex transparent objects
@cindex removing objects
@cindex hiding objects
@cindex invisible objects
The following example demonstrates how to connect different voices
-using ties. Normally, ties only connect two notes in the same
-voice. By introducing a tie in a different voice,
-
-@lilypond[fragment,relative=2]
- << {
- b8~ b8\noBeam
- } \\ {
- b[ g8]
- } >>
+using ties. Normally, ties only connect two notes in the same
+voice. By introducing a tie in a different voice,
+
+@lilypond[quote,fragment,relative=2]
+<< {
+ b8~ b8\noBeam
+} \\ {
+ b[ g8]
+} >>
@end lilypond
@noindent
and blanking the first up-stem in that voice, the tie appears to cross
voices:
-@lilypond[fragment,relative=2,verbatim]
- << {
- \once \override Stem #'transparent = ##t
- b8~ b8\noBeam
- } \\ {
- b[ g8]
- } >>
+@lilypond[quote,fragment,relative=2,verbatim]
+<< {
+ \once \override Stem #'transparent = ##t
+ b8~ b8\noBeam
+} \\ {
+ b[ g8]
+} >>
@end lilypond
@item
The @code{padding} property for objects with
@cindex @code{padding}
-@code{side-position-interface} can be set to increase distance between
-symbols that are printed above or below notes. We only give an
+@code{side-position-interface} can be set to increase the distance between
+symbols that are printed above or below notes. We only give an
example; a more elaborate explanation is in @ref{Constructing a
tweak}:
-@lilypond[fragment,relative=1,verbatim]
- c2\fermata
- \override Script #'padding = #3
- b2\fermata
+@lilypond[quote,fragment,relative=1,verbatim]
+c2\fermata
+\override Script #'padding = #3
+b2\fermata
@end lilypond
@end itemize
a command like
@example
- \override Voice.Stem #'thickness = #3.0
+\override Voice.Stem #'thickness = #3.0
@end example
@noindent
@cindex graphical object descriptions
@cindex tweaking
@cindex @code{\override}
-@cindex @code{\set}
@cindex internal documentation
We demonstrate how to glean this information from the notation manual
Suppose we want to move the fingering indication in the fragment
below:
-@lilypond[fragment,relative=2,verbatim]
+@lilypond[quote,fragment,relative=2,verbatim]
c-2
\stemUp
f
This fragment points to two parts of the program reference: a page
-on @code{FingerEvent} and on @code{Fingering}.
+on @code{FingerEvent} and one on @code{Fingering}.
-The page on @code{FingerEvent} describes the properties of the music
-expression for the input @code{-2}. The page contains many links
+The page on @code{FingerEvent} describes the properties of the music
+expression for the input @code{-2}. The page contains many links
forward. For example, it says
@quotation
- Accepted by: @internalsref{Fingering_engraver},
+Accepted by: @internalsref{Fingering_engraver},
@end quotation
@noindent
plug-in, which says
@quotation
- This engraver creates the following layout objects: @internalsref{Fingering}.
+This engraver creates the following layout objects: @internalsref{Fingering}.
@end quotation
In other words, once the @code{FingerEvent}s are interpreted, the
@internalsref{Fingering} objects,
- Lo and behold, that is also the
+Lo and behold, that is also the
second bit of information listed under @b{See also} in the Notation
-manual. By clicking around in the program reference, we can follow the
+manual. By clicking around in the program reference, we can follow the
flow of information within the program, either forward (like we did
here), or backwards, following links like this:
@itemize @bullet
@item @internalsref{Fingering}:
- @internalsref{Fingering} objects are created by:
- @b{@internalsref{Fingering_engraver}}
+@internalsref{Fingering} objects are created by:
+@b{@internalsref{Fingering_engraver}}
@item @internalsref{Fingering_engraver}:
Music types accepted: @b{@internalsref{fingering-event}}
+
@item @internalsref{fingering-event}:
Music event type @code{fingering-event} is in Music expressions named
@b{@internalsref{FingerEvent}}
The program reference can also be browsed like a normal document. It
contains a chapter on
@ifhtml
-@internalsref{Music-definitions},
+@internalsref{Music definitions},
@end ifhtml
@ifnothtml
@code{Music definitions}
@end ifnothtml
-on @internalsref{Translation}, and the @internalsref{Backend}. Every
+on @internalsref{Translation}, and the @internalsref{Backend}. Every
chapter lists all the definitions used, and all properties that may be
tuned.
@cindex interface, layout
@cindex layout interface
-The HTML page which we found in the previous section, describes the
-layout object called @internalsref{Fingering}. Such an object is a
-symbol within the score. It has properties, which store numbers (like
+The HTML page that we found in the previous section, describes the
+layout object called @internalsref{Fingering}. Such an object is a
+symbol within the score. It has properties that store numbers (like
thicknesses and directions), but also pointers to related objects. A
layout object is also called @emph{grob},
@cindex grob
The page for @code{Fingering} lists the definitions for the
-@code{Fingering} object. For example, the page says
+@code{Fingering} object. For example, the page says
@quotation
- @code{padding} (dimension, in staff space):
+@code{padding} (dimension, in staff space):
- @code{0.6}
+@code{0.6}
@end quotation
+@noindent
which means that the number will be kept at a distance of at least 0.6
of the note head.
Each layout object may have several functions as a notational or
-typographical element. For example, the Fingering object
+typographical element. For example, the Fingering object
has the following aspects
@itemize @bullet
-@item Its size is independent of the horizontal spacing, unlike slurs or beams.
+@item
+Its size is independent of the horizontal spacing, unlike slurs or beams.
+
+@item
+It is a piece of text. Granted, it is usually a very short text.
+
+@item
+That piece of text is typeset with a font, unlike slurs or beams.
-@item It is a piece of text. Granted, it is usually a very short text.
+@item
+Horizontally, the center of the symbol should be aligned to the
+center of the notehead.
-@item That piece of text is typeset with a font, unlike slurs or beams.
-@item Horizontally, the center of the symbol should be aligned to the
-center of the notehead
-@item Vertically, the symbol is placed next to the note and the staff.
+@item
+Vertically, the symbol is placed next to the note and the staff.
-@item The
- vertical position is also coordinated with other super and subscript
+@item
+The vertical position is also coordinated with other super- and subscript
symbols.
@end itemize
-Each of these aspects is captured in a so-called @emph{interface},
+Each of these aspects is captured in so-called @emph{interface}s,
which are listed on the @internalsref{Fingering} page at the bottom
@quotation
them are not user-serviceable (``Internal properties''), but others
are.
-We have been talking of `the' @code{Fingering} object, but actually it
-does not amount to much. The initialization file
-@file{scm/define-grobs.scm} shows the soul of the `object',
+We have been talking of @emph{the} @code{Fingering} object, but actually it
+does not amount to much. The initialization file
+@file{scm/@/define@/-grobs@/.scm} shows the soul of the `object',
-@verbatim
- (Fingering
- . (
- (print-function . ,Text_interface::print)
- (padding . 0.6)
- (staff-padding . 0.6)
- (self-alignment-X . 0)
- (self-alignment-Y . 0)
- (script-priority . 100)
- (font-encoding . number)
- (font-size . -5)
- (meta . ((interfaces . (finger-interface font-interface
- text-script-interface text-interface
- side-position-interface self-alignment-interface
- item-interface))))
- ))
-@end verbatim
+@example
+(Fingering
+ . ((print-function . ,Text_interface::print)
+ (padding . 0.6)
+ (staff-padding . 0.6)
+ (self-alignment-X . 0)
+ (self-alignment-Y . 0)
+ (script-priority . 100)
+ (font-size . -5)
+ (meta . ((interfaces . (finger-interface font-interface
+ text-script-interface text-interface
+ side-position-interface
+ self-alignment-interface
+ item-interface))))))
+@end example
@noindent
As you can see, the @code{Fingering} object is nothing more than a
Recall that we wanted to change the position of the @b{2} in
-@lilypond[fragment,relative=2,verbatim]
+@lilypond[quote,fragment,relative=2,verbatim]
c-2
\stemUp
f
@end lilypond
Since the @b{2} is vertically positioned next to its note, we have to
-meddle with the interface associated with this positioning. This is
-done using @code{side-position-interface}. The page for this interface
+meddle with the interface associated with this positioning. This is
+done using @code{side-position-interface}. The page for this interface
says
@quotation
@code{side-position-interface}
- Position a victim object (this one) next to other objects (the
- support). The property @code{direction} signifies where to put the
- victim object relative to the support (left or right, up or down?)
+Position a victim object (this one) next to other objects (the
+support). The property @code{direction} signifies where to put the
+victim object relative to the support (left or right, up or down?)
@end quotation
@cindex padding
@noindent
below this description, the variable @code{padding} is described as
+
@quotation
@table @code
@item padding
- (dimension, in staff space)
+(dimension, in staff space)
- Add this much extra space between objects that are next to each
- other.
+Add this much extra space between objects that are next to each other.
@end table
@end quotation
@end example
Inserting this command before the Fingering object is created,
-i.e. before @code{c2}, yields the following result:
+i.e., before @code{c2}, yields the following result:
-@lilypond[relative=2,fragment,verbatim]
+@lilypond[quote,relative=2,fragment,verbatim]
\once \override Voice.Fingering #'padding = #3
c-2
\stemUp
the @internalsref{Fingering_engraver} plug-in says
@quotation
- Fingering_engraver is part of contexts: @dots{} @b{@internalsref{Voice}}
+Fingering_engraver is part of contexts: @dots{} @b{@internalsref{Voice}}
@end quotation
@node Difficult tweaks
@subsection Difficult tweaks
-There are two classes of difficult adjustments. First, when there are
+There are two classes of difficult adjustments. First, when there are
several of the same objects at one point, and you want to adjust only
-one. For example, if you want to change only one note head in a chord.
+one. For example, if you want to change only one note head in a chord.
In this case, the @code{\applyoutput} function must be used. The
next example defines a Scheme function @code{set-position-font-size}
on objects that have @internalsref{note-head-interface} and are at the
right Y-position.
-@lilypond[verbatim]
+@lilypond[quote,verbatim]
#(define ((set-position-font-size pos size) grob origin current)
(let*
((interfaces (ly:grob-property grob 'interfaces))
(position (ly:grob-property grob 'staff-position)))
- (if (and
-
+ (if (and
; is this a note head?
(memq 'note-head-interface interfaces)
(set! (ly:grob-property grob 'font-size) size))))
\relative {
- c
- \applyoutput #(set-position-font-size -2 4)
- <c e g>
+ c
+ \applyoutput #(set-position-font-size -2 4)
+ <c e g>
}
@end lilypond
@noindent
-A similar technique can be used for accidentals. In that case, the
+A similar technique can be used for accidentals. In that case, the
function should check for @code{accidental-interface}.
Another difficult adjustment is the appearance of spanner objects,
-such as slur and tie. Initially, only one of these objects is created,
-and they can be adjust with the normal mechanism. However, in some
-cases the spanners cross line breaks. If this happens, these objects
+such as slur and tie. Initially, only one of these objects is created,
+and they can be adjusted with the normal mechanism. However, in some
+cases the spanners cross line breaks. If this happens, these objects
are cloned. A separate object is created for every system that it is
-in. These are clones of the original object and inherit all
+in. These are clones of the original object and inherit all
properties, including @code{\override}s.
In other words, an @code{\override} always affects all pieces of a
-broken spanner. To change only one part of a spanner at a line break,
-it is necessary to hook into the formatting process. The
+broken spanner. To change only one part of a spanner at a line break,
+it is necessary to hook into the formatting process. The
@code{after-line-breaking-callback} property contains the Scheme procedure
-that is called after line breaks have been determined, and layout
+that is called after the line breaks have been determined, and layout
objects have been split over different systems.
In the following example, we define a procedure
-@code{my-callback}. This procedure
+@code{my-callback}. This procedure
@itemize @bullet
@item
@end itemize
This procedure is installed into @internalsref{Tie}, so the last part
-of broken tie is translated up.
+of the broken tie is translated up.
-@lilypond[verbatim,raggedright]
+@lilypond[quote,verbatim,raggedright]
#(define (my-callback grob)
(let* (
+ ; have we been split?
+ (orig (ly:grob-original grob))
- ; have we been split?
- (orig (ly:grob-original grob))
-
- ; if yes, get the split pieces (our siblings)
- (siblings (if (ly:grob? orig) (ly:spanner-broken-into orig) '() )))
+ ; if yes, get the split pieces (our siblings)
+ (siblings (if (ly:grob? orig)
+ (ly:spanner-broken-into orig) '() )))
-
- (if (and (>= (length siblings) 2)
+ (if (and (>= (length siblings) 2)
(eq? (car (last-pair siblings)) grob))
- (ly:grob-set-property! grob 'extra-offset '(-2 . 5))
- )))
+ (ly:grob-set-property! grob 'extra-offset '(-2 . 5)))))
\relative c'' {
- \override Tie #'after-line-breaking-callback =
- #my-callback
- c1 ~ \break c2 ~ c
+ \override Tie #'after-line-breaking-callback =
+ #my-callback
+ c1 ~ \break c2 ~ c
}
@end lilypond
-
+@noindent
When applying this trick, the new @code{after-line-breaking-callback}
should also call the old @code{after-line-breaking-callback}, if there
-is one. For example, if using this with @code{Slur},
+is one. For example, if using this with @code{Slur},
@code{Slur::after_line_breaking} should also be called.
@node Fonts
@section Fonts
+This section details the ways that the font can be changed.
+
@menu
* Selecting font sizes::
* Font selection::
The easiest method of setting the font size of any context, is by
setting the @code{fontSize} property.
-@lilypond[fragment,relative=1,verbatim]
- c8
- \set fontSize = #-4
- c f
- \set fontSize = #3
- g
+@lilypond[quote,fragment,relative=1,verbatim]
+c8
+\set fontSize = #-4
+c f
+\set fontSize = #3
+g
@end lilypond
+@noindent
It does not change the size of variable symbols, such as beams or
slurs.
-Internally, the @code{fontSize} context property will cause
+Internally, the @code{fontSize} context property will cause the
@code{font-size} property to be set in all layout objects. The value
of @code{font-size} is a number indicating the size relative to the
standard size for the current staff height. Each step up is an
-increase of approximately 12% of the font size. Six steps is exactly a
-factor two. The Scheme function @code{magstep} converts a
+increase of approximately 12% of the font size. Six steps is exactly a
+factor two. The Scheme function @code{magstep} converts a
@code{font-size} number to a scaling factor.
-@lilypond[fragment,relative=1,verbatim]
- c8
- \override NoteHead #'font-size = #-4
- c f
- \override NoteHead #'font-size = #3
- g
+@lilypond[quote,fragment,relative=1,verbatim]
+c8
+\override NoteHead #'font-size = #-4
+c f
+\override NoteHead #'font-size = #3
+g
@end lilypond
-LilyPond has fonts in different design sizes. The music fonts for
+LilyPond has fonts in different design sizes. The music fonts for
smaller sizes are chubbier, while the text fonts are relatively wider.
Font size changes are achieved by scaling the design size that is
-closest to the desired size. The standard font size (for
-@code{font-size} equals 0), depends on the standard staff height. For
-a 20 pt staff, a 10pt font is selected.
+closest to the desired size. The standard font size (for
+@code{font-size} equals 0), depends on the standard staff height. For
+a 20pt staff, a 10pt font is selected.
The @code{font-size} mechanism does not work for fonts selected
-through @code{font-name}. These may be scaled with
-@code{font-magnification}. The @code{font-size} property can only be
+through @code{font-name}. These may be scaled with
+@code{font-magnification}. The @code{font-size} property can only be
set on layout objects that use fonts; these are the ones supporting
-@internalsref{font-interface} layout interface.
+the @internalsref{font-interface} layout interface.
@refcommands
@itemize @bullet
@item @code{font-encoding}
-is a symbol that sets layout of the glyphs. Choices include @code{ec}
-for @TeX{} EC font encoding, @code{fetaBraces} (for piano staff
-braces), @code{fetaMusic} (the standard music font, including ancient
-glyphs), @code{fetaDynamic} (for dynamic signs) and @code{fetaNumber}
-for the number font.
+is a symbol that sets layout of the glyphs. This should only be set to
+select different types of non-text fonts, eg.
+@code{fetaBraces} for piano staff braces, @code{fetaMusic} the
+standard music font, including ancient glyphs, @code{fetaDynamic} for
+dynamic signs and @code{fetaNumber} for the number font.
@item @code{font-family}
- is a symbol indicating the general class of the typeface. Supported are
+is a symbol indicating the general class of the typeface. Supported are
@code{roman} (Computer Modern), @code{sans}, and @code{typewriter}.
@item @code{font-shape}
- is a symbol indicating the shape of the font, there are typically
-several font shapes available for each font family. Choices are
+is a symbol indicating the shape of the font. There are typically
+several font shapes available for each font family. Choices are
@code{italic}, @code{caps}, and @code{upright}.
@item @code{font-series}
-is a symbol indicating the series of the font. There are typically several
-font series for each font family and shape. Choices are @code{medium}
-and @code{bold}.
+is a symbol indicating the series of the font. There are typically
+several font series for each font family and shape. Choices are
+@code{medium} and @code{bold}.
@end itemize
Fonts selected in the way sketched above come from a predefined style
sheet.
- The font used for printing a object can be selected by setting
-@code{font-name}, e.g.
+The font used for printing a object can be selected by setting
+@code{font-name}, e.g.,
@example
- \override Staff.TimeSignature
- #'font-name = #"cmr17"
+\override Staff.TimeSignature
+ #'font-name = #"cmr17"
@end example
@noindent
-Any font can be used, as long as it is available to @TeX{}. Possible
+Any font can be used, as long as it is available to @TeX{}. Possible
fonts include foreign fonts or fonts that do not belong to the
Computer Modern font family. The size of fonts selected in this way
can be changed with the @code{font-magnification} property. For
@seealso
-Init files: @file{ly/declarations-init.ly} contains hints how new
+Init files: @file{ly/@/declarations@/-init@/.ly} contains hints how new
fonts may be added to LilyPond.
@cindex typeset text
The internal mechanism to typeset texts is accessed with the keyword
-@code{\markup}. Within markup mode, you can enter texts similar to
-lyrics. They are simply entered, while commands use the backslash @code{\}.
+@code{\markup}. Within markup mode, you can enter texts similar to
+lyrics. They are simply entered, while commands use the backslash @code{\}.
@cindex markup
-@lilypond[verbatim,fragment,relative=1]
- c1^\markup { hello }
- c1_\markup { hi there }
- c1^\markup { hi \bold there, is \italic anyone home? }
+@lilypond[quote,verbatim,fragment,relative=1]
+c1^\markup { hello }
+c1_\markup { hi there }
+c1^\markup { hi \bold there, is \italic anyone home? }
@end lilypond
@cindex font switching
word only; enclose a set of texts with braces to apply a command
to more words:
@example
- \markup @{ \bold @{ hi there @} @}
+\markup @{ \bold @{ hi there @} @}
@end example
@noindent
-For clarity, you can also do this for single arguments, e.g.
+For clarity, you can also do this for single arguments, e.g.,
-@verbatim
- \markup { is \italic { anyone } home }
-@end verbatim
+@example
+\markup @{ is \italic @{ anyone @} home @}
+@end example
@cindex font size, texts
In markup mode you can compose expressions, similar to mathematical
-expressions, XML documents, and music expressions. The braces group
-notes into horizontal lines. Other types of lists also exist: you can
-stack expressions grouped with @code{<} and @code{>} vertically with
-the command @code{\column}. Similarly, @code{\center-align} aligns
-texts by their center lines:
-
-@lilypond[verbatim,fragment,relative=1]
- c1^\markup { \column < a bbbb c > }
- c1^\markup { \center-align < a bbbb c > }
- c1^\markup { \line < a b c > }
+expressions, XML documents, and music expressions. You can stack
+expressions grouped vertically with the command @code{\column}.
+Similarly, @code{\center-align} aligns texts by their center lines:
+
+@lilypond[quote,verbatim,fragment,relative=1]
+c1^\markup { \column { a bbbb \line { c d } } }
+c1^\markup { \center-align { a bbbb c } }
+c1^\markup { \line { a b c } }
@end lilypond
-Markups can be stored in variables, and these variables
+Markups can be stored in variables and these variables
may be attached to notes, like
-@verbatim
-allegro = \markup { \bold \large { Allegro } }
- { a^\allegro b c d }
-@end verbatim
+@example
+allegro = \markup @{ \bold \large @{ Allegro @} @}
+ @{ a^\allegro b c d @}
+@end example
Some objects have alignment procedures of their own, which cancel out
Similarly, for moving whole texts over notes with
@code{\raise}, use the following trick:
-@lilypond[verbatim]
+@lilypond[quote,verbatim]
{
c'^\markup { \raise #0.5 not-raised }
- c'^\markup { "" \raise #0.5 raised }
+ c'^\markup { "" \raise #0.5 raised }
}
@end lilypond
@seealso
-Init files: @file{scm/new-markup.scm}.
+Init files: @file{scm/@/new@/-markup@/.scm}.
@refbugs
-No kerning or generation of ligatures is only done when the by @TeX{}
+Kerning or generation of ligatures is only done when the @TeX{}
backend is used. In this case, LilyPond does not account for them so
texts will be spaced slightly too wide.
* Text encoding::
* Nested scores::
* Overview of text markup commands::
+* New dynamic marks::
@end menu
@node Text encoding
@subsection Text encoding
-Texts can be entered in different encodings. The encoding of the
-file can be set with @code{\encoding}.
+LilyPond uses the Pango library to format multi-lingual texts, and
+does not perform any input-encoding conversions. This means that any
+text, be it title, lyric text, or musical instruction containing
+non-ASCII characters, must be utf-8. Easiest to enter such texts is
+by using a Unicode-aware editor, and save using utf-8 encoding. Most
+popular modern editors have utf-8 support, for example, vim, Emacs,
+jEdit, and GEdit do.
-@example
- \encoding "latin1"
-@end example
+Depending on the fonts installed, the following fragment shows Hebrew
+and Cyrillic lyrics,
-This command may be placed anywhere in the input file. The current
-encoding is passed as an extra argument to @code{\markup} commands,
-and is passed similarly to lyric syllables.
+@cindex Cyrillic
+@cindex Hebrew
+@cindex ASCII, non
-If no @code{\encoding} has been specified, then the encoding is taken
-from the @code{\paper} block (or @code{\bookpaper}, if @code{\paper}
-does not specify encoding). The variable @code{inputencoding} may be
-set to a string or symbol specifying the encoding, e.g.
+@lilypondfile[fontload]{utf8.ly}
-@verbatim
- \paper {
- inputencoding = "latin1"
- }
-@end verbatim
-Normal strings, are unaffected by @code{\encoding}. This means that
-the following will usually not produce ba@ss{}tuba in the title.
+The @TeX{} backend does not handle encoding specially at all. Strings
+in the input are put in the output as-is. Extents of text items in the
+@TeX{} backend, are determined by reading a file created via the
+@file{texstr} backend,
-@verbatim
- \header {
- title = "Grazing cow"
- instrument = "Baßtuba"
- }
-@end verbatim
+@example
+lilypond -b texstr input/les-nereides.ly
+latex les-nereides.texstr
+@end example
-Rather, you should say
-@verbatim
- instrument = \markup { Baßtuba }
-@end verbatim
+The last command produces @file{les-nereides.textmetrics}, which is
+read when you execute
-@noindent
-or set @code{inputencoding} in the @code{\bookpaper} block.
+@example
+lilypond -b tex input/les-nereides.ly
+@end example
+
+Both @file{les-nereides.texstr} and @file{les-nereides.tex} need
+suitable LaTeX wrappers to load appropriate La@TeX{} packages for
+interpreting non-ASCII strings.
-There is a special encoding, called @code{TeX}. This encoding does not
-reencode text for the font used. Rather, it tries to guess the width
-of @TeX{} commands, such as @code{\"}. Strings encoded with @code{TeX}
-are passed to the output back-end verbatim.
+@seealso
-@cindex encoding
-@cindex @code{\encoding}
-@cindex inputencoding
-@cindex @TeX{} commands in strings
+@inputfileref{input/regression,utf8.ly}
@node Nested scores
@subsection Nested scores
It is possible to nest music inside markups, by adding a @code{\score}
-block to markup expression. Such a score must contain a @code{\paper}
+block to a markup expression. Such a score must contain a @code{\layout}
block.
-@lilypond[verbatim,raggedright]
+@lilypond[quote,verbatim,raggedright]
\relative {
- c4 d^\markup {
+ c4 d^\markup {
\score {
\relative { c4 d e f }
- \paper { }
+ \layout { }
}
}
e f
-@node Overview of text markup commands
+@node Overview of text markup commands
@subsection Overview of text markup commands
The following commands can all be used inside @code{\markup @{ @}}.
@include markup-commands.tely
-@node Global layout
-@section Global layout
-
-The global layout determined by three factors: the page layout, the
-line breaks, and the spacing. These all influence each other. The
-choice of spacing determines how densely each system of music is set,
-which influences where line breaks are chosen, and thus ultimately how
-many pages a piece of music takes.
-
-Globally spoken, this procedure happens in three steps: first,
-flexible distances (``springs'') are chosen, based on durations. All
-possible line breaking combination are tried, and the one with the
-best results --- a layout that has uniform density and requires as
-little stretching or cramping as possible --- is chosen.
-
-After spacing and linebreaking, the systems are distributed across
-pages, taking into account the size of the page, and the size of the
-titles.
-
-
-
-@menu
-* Setting global staff size::
-* Vertical spacing of piano staves::
-* Vertical spacing::
-* Horizontal spacing::
-* Line length::
-* Line breaking::
-* Multiple movements::
-* Creating titles::
-* Page breaking::
-* Paper size::
-* Page layout::
-@end menu
-
-
-@node Setting global staff size
-@subsection Setting global staff size
-
-@cindex font size, setting
-@cindex staff size, setting
-@cindex @code{paper} file
-
-The Feta font provides musical symbols at eight different
-sizes. Each font is tuned for a different staff size: at a smaller size
-the font becomes heavier, to match the relatively heavier staff lines.
-The recommended font sizes are listed in the following table:
-
-@multitable @columnfractions .25 .25 .25 .25
-
-@item @b{font name}
-@tab @b{staff height (pt)}
-@tab @b{staff height (mm)}
-@tab @b{use}
-
-@item feta11
-@tab 11.22
-@tab 3.9
-@tab pocket scores
+@node New dynamic marks
+@subsection New dynamic marks
-@item feta13
-@tab 12.60
-@tab 4.4
-@tab
-
-@item feta14
-@tab 14.14
-@tab 5.0
-@tab
-
-@item feta16
-@tab 15.87
-@tab 5.6
-@tab
-
-@item feta18
-@tab 17.82
-@tab 6.3
-@tab song books
-
-@item feta20
-@tab 20
-@tab 7.0
-@tab standard parts
-
-@item feta23
-@tab 22.45
-@tab 7.9
-@tab
-
-@item feta26
-@tab 25.2
-@tab 8.9
-@tab
-@c modern rental material ?
-
-@end multitable
-
-These fonts are available in any sizes. The context property
-@code{fontSize} and the layout property @code{staff-space} (in
-@internalsref{StaffSymbol}) can be used to tune size for individual
-staves. The size of individual staves are relative to the global size,
-which can be set in the following manner:
-
-@example
- #(set-global-staff-size 14)
-@end example
-
-This sets the global default size to 14pt staff height, and scales all
-fonts accordingly.
-
-@seealso
-
-This manual: @ref{Selecting font sizes}.
-
-
-
-
-@node Vertical spacing of piano staves
-@subsection Vertical spacing of piano staves
+It is possible to print new dynamic marks or text that should be aligned
+with dynamics. Use @code{make-dynamic-script} to create these marks.
-The distance between staves of a @internalsref{PianoStaff} cannot be
-computed during formatting. Rather, to make cross-staff beaming work
-correctly, that distance has to be fixed beforehand.
-
-The distance of staves in a @code{PianoStaff} is set with the
-@code{forced-distance} property of the
-@internalsref{VerticalAlignment} object, created in
-@internalsref{PianoStaff}.
+@cindex make-dynamic-script
-It can be adjusted as follows
-@verbatim
-\new PianoStaff \with {
- \override VerticalAlignment #'forced-distance = #7
-} {
- ...
+@lilypond[quote,verbatim,raggedright]
+sfzp = #(make-dynamic-script "sfzp")
+\relative c' {
+ c4 c c\sfzp c
}
-@end verbatim
-This would bring the staves together at a distance of 7 staff spaces,
-measured from the center line of each staff.
-
-The difference is demonstrated in the following example,
-@lilypond[verbatim]
-\relative <<
- \new PianoStaff \with {
- \override VerticalAlignment #'forced-distance = #7
- } <<
- \new Staff { c1 }
- \new Staff { c }
- >>
- \new PianoStaff <<
- \new Staff { c }
- \new Staff { c }
- >>
->>
@end lilypond
+@cindex Dynamics, editorial
+@cindex Dynamics, parenthesis
+It is also possible to print dynamics in round parenthesis or square
+brackets. These are often used for adding editorial dynamics.
-@refbugs
-
-@code{forced-distance} cannot be changed per system.
-
-@node Vertical spacing
-@subsection Vertical spacing
-
-@cindex vertical spacing
-@cindex distance between staves
-@cindex staff distance
-@cindex between staves, distance
-@cindex staves per page
-@cindex space between staves
-
-The height of each system is determined automatically. To prevent
-systems from bumping into each other, some minimum distances are set.
-By changing these, you can put staves closer together, and thus put
-more systems onto one page.
-
-Normally staves are stacked vertically. To make staves maintain a
-distance, their vertical size is padded. This is done with the
-property @code{minimumVerticalExtent}. It takes a pair of numbers, so
-if you want to make it smaller from its default, then you could set
-@example
- \set Staff.minimumVerticalExtent = #'(-4 . 4)
-@end example
-This sets the vertical size of the current staff to 4 staff spaces on
-either side of the center staff line. The argument of
-@code{minimumVerticalExtent} is interpreted as an interval, where the
-center line is the 0, so the first number is generally negative. The
-staff can be made larger at the bottom by setting it to @code{(-6
-. 4)}.
-
-
-@seealso
-
-Internals: Vertical alignment of staves is handled by the
-@internalsref{VerticalAlignment} object.
-
-@refbugs
-
-@code{minimumVerticalExtent} is syntactic sugar for setting
-@code{minimum-Y-extent} of the @internalsref{VerticalAxisGroup} of the
-current context. It can only be changed score wide.
-
-
-
-@node Horizontal spacing
-@subsection Horizontal Spacing
-
-The spacing engine translates differences in durations into
-stretchable distances (``springs'') of differring lengths. Longer
-durations get more space, shorter durations get less. The shortest
-durations get a fixed amount of space (which is controlled by
-@code{shortest-duration-space} in the @internalsref{SpacingSpanner} object).
-The longer the duration, the more space it gets: doubling a
-duration adds a fixed amount (this amount is controlled by
-@code{spacing-increment}) of space to the note.
-
-For example, the following piece contains lots of half, quarter, and
-8th notes, the eighth note is followed by 1 note head width (NHW).
-The quarter note is followed by 2 NHW, the half by 3 NHW, etc.
-@lilypond[fragment,verbatim,relative=1] c2 c4. c8 c4. c8 c4. c8 c8
-c8 c4 c4 c4
-@end lilypond
-
-Normally, @code{spacing-increment} is set to 1.2 staff space, which is
-approximately the width of a note head, and
-@code{shortest-duration-space} is set to 2.0, meaning that the
-shortest note gets 2.4 staff space (2.0 times the
-@code{spacing-increment}) of horizontal space. This space is counted
-from the left edge of the symbol, so the shortest notes are generally
-followed by one NHW of space.
-
-If one would follow the above procedure exactly, then adding a single
-32th note to a score that uses 8th and 16th notes, would widen up the
-entire score a lot. The shortest note is no longer a 16th, but a 32nd,
-thus adding 1 NHW to every note. To prevent this, the shortest
-duration for spacing is not the shortest note in the score, but rather
-the one which occurs most frequently.
-
-
-The most common shortest duration is determined as follows: in every
-measure, the shortest duration is determined. The most common short
-duration, is taken as the basis for the spacing, with the stipulation
-that this shortest duration should always be equal to or shorter than
-1/8th note. The shortest duration is printed when you run
-@code{lilypond} with the @code{--verbose} option.
-
-These durations may also be customized. If you set the
-@code{common-shortest-duration} in @internalsref{SpacingSpanner}, then
-this sets the base duration for spacing. The maximum duration for this
-base (normally 1/8th), is set through @code{base-shortest-duration}.
-
-@cindex @code{common-shortest-duration}
-@cindex @code{base-shortest-duration}
-@cindex @code{stem-spacing-correction}
-@cindex @code{spacing}
-
-Notes that are even shorter than the commoon shortest note are
-followed by a space that is proportional to their duration relative to
-the common shortest note. So if we were to add only a few 16th notes
-to the example above, they would be followed by half a NHW:
-
-@lilypond[fragment,verbatim,relative=2]
- c2 c4. c8 c4. c16[ c] c4. c8 c8 c8 c4 c4 c4
+@lilypond[quote,verbatim,raggedright]
+\version "2.4.2"
+rndf = \markup{ \center-align {\line { \bold{\italic (}
+ \dynamic f \bold{\italic )} }} }
+boxf = \markup{ \bracket { \dynamic f } }
+{ c'1_\rndf c'1_\boxf }
@end lilypond
-In the introduction (see @ref{Engraving}), it was explained that stem
-directions influence spacing. This is controlled with the
-@code{stem-spacing-correction} property in the
-@internalsref{NoteSpacing}, object. These are generated for every
-@internalsref{Voice} context. The @code{StaffSpacing} object
-(generated at @internalsref{Staff} context) contains the same property
-for controlling the stem/bar line spacing. The following example shows
-these corrections, once with default settings, and once with
-exaggerated corrections:
-
-@lilypond[raggedright]
-{
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
- \override Staff.NoteSpacing #'stem-spacing-correction = #1.5
- \override Staff.StaffSpacing #'stem-spacing-correction = #1.5
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
-}
-@end lilypond
-
-
-@seealso
-
-Internals: @internalsref{SpacingSpanner}, @internalsref{NoteSpacing},
-@internalsref{StaffSpacing}, @internalsref{SeparationItem}, and
-@internalsref{SeparatingGroupSpanner}.
-
-@refbugs
-
-Spacing is determined on a score wide basis. If you have a score that
-changes its character (measured in durations) halfway during the
-score, the part containing the longer durations will be spaced too
-widely.
-
-There is no convenient mechanism to manually override spacing. The
-following work-around may be used to insert extra space into a score.
-@example
- \once \override Score.SeparationItem #'padding = #1
-@end example
-
-No work-around exists for decreasing the amount of space.
-
-@node Line length
-@subsection Line length
-
-@cindex page breaks
-@cindex breaking pages
-
-@cindex @code{indent}
-@cindex @code{linewidth}
-
-The most basic settings influencing the spacing are @code{indent} and
-@code{linewidth}. They are set in the @code{\paper} block. They
-control the indentation of the first line of music, and the lengths of
-the lines.
-
-If @code{raggedright} is set to true in the @code{\paper}
-block, then the lines are justified at their natural length. This
-useful for short fragments, and for checking how tight the natural
-spacing is.
-
-@cindex page layout
-@cindex vertical spacing
-
-The option @code{raggedlast} is similar to @code{raggedright}, but
-only affects the last line of the piece. No restrictions are put on
-that line. The result is similar to formatting text paragraphs. In a
-paragraph, the last line simply takes its natural length.
-
-
-@node Line breaking
-@subsection Line breaking
-
-@cindex line breaks
-@cindex breaking lines
-
-Line breaks are normally computed automatically. They are chosen such
-that lines look neither cramped nor loose, and that consecutive lines
-have similar density.
-
-Occasionally you might want to override the automatic breaks; you can
-do this by specifying @code{\break}. This will force a line break at
-this point. Line breaks can only occur at places where there are bar
-lines. If you want to have a line break where there is no bar line,
-you can force an invisible bar line by entering @code{\bar
-""}. Similarly, @code{\noBreak} forbids a line break at a
-point.
-
-
-@cindex regular line breaks
-@cindex four bar music.
-
-For line breaks at regular intervals use @code{\break} separated by
-skips and repeated with @code{\repeat}:
-@example
-<< \repeat unfold 7 @{
- s1 \noBreak s1 \noBreak
- s1 \noBreak s1 \break @}
- @emph{the real music}
->>
-@end example
-
-@noindent
-This makes the following 28 measures (assuming 4/4 time) be broken every
-4 measures, and only there.
-
-@refcommands
-
-@code{\break}, and @code{\noBreak}.
-@cindex @code{\break}
-@cindex @code{\noBreak}
-
-@seealso
-
-Internals: @internalsref{BreakEvent}.
-
-
-
-@node Multiple movements
-@subsection Multiple movements
-
-@cindex bibliographic information
-@cindex titles
-@cindex composer
-@cindex Engraved by LilyPond
-
-A document may contains multiple pieces of music. Examples of these
-are an etude book, or an orchestral part with multiple movements.
-Each movement is entered with a @code{\score} block,
-
-@example
- \score @{
- @var{..music..}
- @}
-@end example
-
-The movements are combined together to
-@code{\book} block is used to group the individual movements.
-
-@example
-\book @{
- \score @{
- @var{..}
- @}
- \score @{
- @var{..}
- @}
-@}
-@end example
-
-
-The header for each piece of music can be put inside the @code{\score}
-block. The @code{piece} name from the header will be printed before
-each movement. The title for the entire book can be put inside the
-@code{\book}, but if it is not present, the @code{\header} which is at
-the top of the file is inserted.
-
-@cindex Engraved by LilyPond
-@cindex signature line
-
-@example
-\book @{
- \header @{
- title = "Eight miniatures"
- composer = "Igor Stravinsky"
- @}
- \score @{
- @dots{}
- \header @{ piece = "Romanze" @}
- @}
- \score @{
- @dots{}
- \header @{ piece = "Menuetto" @}
- @}
-@}
-@end example
-
-@node Creating titles
-@subsection Creating titles
-
-Titles are created for each @code{\score} block, and over a
-@code{\book}.
-
-The contents of the titles are taken from the @code{\header} blocks.
-The header block for a book supports the following
-@table @code
-@item title
- The title of the music. Centered on top of the first page.
-@item subtitle
- Subtitle, centered below the title.
-@item poet
- Name of the poet, left flushed below the subtitle.
-@item composer
- Name of the composer, right flushed below the subtitle.
-@item meter
- Meter string, left flushed below the poet.
-@item opus
- Name of the opus, right flushed below the composer.
-@item arranger
- Name of the arranger, right flushed below the opus.
-@item instrument
- Name of the instrument, centered below the arranger.
-@item dedication
- To whom the piece is dedicated.
-@item piece
- Name of the piece, left flushed below the instrument.
-@end table
-
-This is a demonstration of the fields available,
-
-@lilypond[verbatim]
-\book {
- \header {
- title = "Title"
- subtitle = "and the subtitle"
- subsubtitle = "Sub sub title"
- poet = "Poet"
- composer = "Composer"
- texttranslator = "Text Translator"
- meter = "Meter"
- arranger = "Arranger"
- instrument = "Instrument"
- piece = "Piece"
- }
-
- \score {
- \header {
- piece = "piece1"
- opus = "opus1"
- }
- { c'1 }
- }
- \score {
- \header {
- piece = "piece2"
- opus = "opus2"
- }
- { c'1 }
- }
-}
-@end lilypond
-
-Different fonts may be selected for each element, by using a
-@code{\markup}, e.g.
-
-@verbatim
- \header {
- title = \markup { \italic { The italic title } }
- }
-@end verbatim
-
-A more advanced option is to change the Scheme functions
-@code{make-book-title} and @code{make-score-title} functions, defined
-in the @code{\bookpaper} of the @code{\book} block. These functions
-create a block of titling, given the information in the
-@code{\header}. The init file @file{ly/titling.scm} shows how the
-default format is created, and it may be used as a template for
-different styles.
-
-
-@cindex \bookpaper
-@cindex header
-@cindex footer
-@cindex page layout
-@cindex titles
-
-
-
-
-@node Page breaking
-@subsection Page breaking
-
-The default page breaking may be overriden by inserting
-@code{\pageBreak} or @code{\noPageBreak} commands. These commands are
-analogous to @code{\break} and @code{\noBreak}. They should be
-inserted with a bar line. These commands force and forbid a page-break
-from happening. Of course, the @code{\pageBreak} command also forces
-a line break.
-
-Page breaks are computed by the @code{page-breaking} function in the
-@code{\bookpaper} block.
-
-@refcommands
-
-@cindex @code{\pageBreak}
-@code{\pageBreak}
-@cindex @code{\noPageBreak}
-@code{\noPageBreak}
-
-@node Paper size
-@subsection Paper size
-
-@cindex paper size
-@cindex page size
-@cindex @code{papersize}
-
-To change the paper size, there are two commands,
-@example
- #(set-default-paper-size "a4")
- \paper@{
- #(set-paper-size "a4")
- @}
-@end example
-The second one sets the size of the @code{\paper} block that it is in.
-
-The following paper sizes are supported.
-
-@table @code
-@item a6
-@item a5
-@item a4
-@item a3
-@item legal
-@item letter
-@item tabloid
-@end table
-
-@cindex orientation
-@cindex landscape
-
-If the symbol @code{landscape} is supplied as argument to
-@code{set-default-paper-size}, the pages will be rotated 90 degrees,
-and line widths will be set longer correspondingly.
-
-@example
-#(set-default-paper-size "a6" 'landscape)
-@end example
-
-@node Page layout
-@subsection Page layout
-
-@cindex page layout
-@cindex margins
-@cindex header, page
-@cindex footer, page
-
-LilyPond will do page layout, setting margins and adding headers and
-footers to each page.
-
-The default layout responds to the following settings in the
-@code{\bookpaper} block
-
-@cindex \bookpaper
-
-@table @code
-@item firstpagenumber
- The value of the page number of the first page. Default is 1.
-@item printfirstpagenumber
- If set to true will print the page number in the first page. Default is
- false.
-@item hsize
- The width of the page
-@item vsize
- The height of the page
-@item topmargin
- Margin between header and top of the page
-@item bottommargin
- Margin between footer and bottom of the page
-@item leftmargin
- Margin between the left side of the page and the beginning of the music.
-@item linewidth
- The length of the paper line.
-@item headsep
- Distance between top-most music system and the page header
-@item footsep
- Distance between bottom-most music system and the page footer
-@item raggedbottom
- If set to true, systems will not be spread across the page.
-
- This should be set false for pieces that have only two or three
-systems per page, for example orchestral scores.
-
-@item raggedlastbottom
- If set to false, systems will be spread to fill the last page.
-
- Pieces that amply fill two pages or more should have this set to
-true.
-
-@item betweensystemspace
- This dimensions determines the distance between systems. It is the
-ideal distance between the center of the bottom staff of one system,
-and the center of the top staff of the next system.
-
-Increasing this will provide a more even appearance of the page at the
-cost of using more vertical space.
-
-@item betweensystempadding
-This dimension is the minimum amount of white space that will always
-be present between the bottom most symbol of one system, and the
-topmost of the next system.
-
-Increasing this will put systems whose bounding boxes almost touch
-farther apart.
-
-@item aftertitlespace
-Amount of space between title and the first system
-@item beforetitlespace
-Amount of space between last system of the previous piece and the
-title of the next
-@item betweentitlespace
-Amount of space between consecutive titles (eg. the title of the
-book and the title of piece).
-
-@end table
-
-@example
- \bookpaper@{
- hsize = 2\cm
- topmargin = 3\cm
- bottommargin = 3\cm
- raggedlastbottom = ##t
- @}
-@end example
-
-You can also define these values in scheme. In that case @code{mm},
-@code{in}, @code{pt} and @code{cm} are variables defined in
-@file{book-paper-defaults.ly} with values in millimeters. That's why the
-value has to be multiplied in the example above.
-
-@example
- \bookpaper@{
- #(define bottommargin (* 2 cm))
- @}
-@end example
-
-@cindex copyright
-@cindex tagline
-
-The default footer is empty, except for the first page, where it the
-@code{copyright} field from @code{\header} is inserted, and the last
-page, where @code{tagline} from @code{\header} is added. The default
-tagline is ``Engraved by LilyPond (@var{version})''.@footnote{Nicely
-printed parts are good PR for us, so please leave the tagline if you
-can.}
-
-The header and footer are created by the functions @code{make-footer}
-and @code{make-header}, defined in @code{\bookpaper}. The default
-implementations are in @file{scm/page-layout.scm}.
-
-The following settings influence the header and footer layout.
-
-@table @code
-@item printpagenumber
- this boolean controls whether a pagenumber is printed.
-@end table
-
-The page layout itself is done by two functions in the
-@code{\bookpaper}, @code{page-music-height} and
-@code{page-make-stencil}. The former tells the line-breaking algorithm
-how much space can be spent on a page, the latter creates the actual
-page given the system to put on it.
-
-
-@seealso
-
-Examples: @inputfileref{input/test,page-breaks.ly}
-
-@refbugs
-
-The option rightmargin is defined but doesn't set the right margin
-yet. The value for the right margin has to be defined adjusting the
-values of the leftmargin and linewidth.
-
-The default page header puts the page number and the @code{instrument}
-field from the @code{\header} block on a line.
-
-
-
-@node File structure
-@section File structure
-
-The bigger part of this manual is concerned with entering various
-forms of music in LilyPond. However, many music expressions are not
-valid input on their own, for example, a @code{.ly} file containing
-only a note
-@example
- c'4
-@end example
-
-@noindent
-will result in a parsing error. Instead, music should be inside other
-expressions, which may be put in a file by themselves. Such
-expressions are called toplevel expressions. This section enumerates
-them all.
-
-A @code{.ly} file contains any number of toplevel expressions, where a
-toplevel expressions is one of the following
-
-@itemize @bullet
-@item An output definition, such as @code{\bookpaper}, @code{\midi}
-and @code{\paper}. Such a definition at toplevel changes the default
-settings for the block entered.
-
-@item An @code{\header} block. This sets the global header block. This
-is the block containing the definitions for book-wide settings, like
-composer, title, etc.
-
-@item An @code{\addquote} statement. See @ref{Quoting other voices}
-for more information.
-
-@item A @code{\score} block. This score will be collected with other
-toplevel scores, and combined as a single @code{\book}.
-
-This behavior can be changed by setting the variable
-@code{toplevel-score-handler} at toplevel. The default handler is
-defined in the init file @file{scm/lily.scm}.
-
-@item
-A @code{\book} block logically combines multiple movements
-(ie. multiple @code{\score} blocks) into one document. A number of
-@code{\scores} creates a single output file, where all movement are
-concatenated..
-
-This behavior can be changed by setting the variable
-@code{toplevel-book-handler} at toplevel. The default handler is
-defined in the init file @file{scm/lily.scm}.
-
-
-@item A compound music expression, such as
-@example
- @{ c'4 d' e'2 @}
-@end example
-
-This will add the piece in a @code{\score}, and formats it into a
-single book together with all other toplevel @code{\score}s and music
-expressions.
-
-This behavior can be changed by setting the variable
-@code{toplevel-music-handler} at toplevel. The default handler is
-defined in the init file @file{scm/lily.scm}.
-
-@end itemize
-
-The following example shows three things which may be entered at
-toplevel
-@verbatim
- \paper {
- % movements are non-justified by default
- raggedright = ##t
- }
-
- \header {
- title = "Do-re-mi"
- }
-
- { c'4 d' e2 }
-@end verbatim
-
-
-At any point in a file, any of the following lexical instructions can
-be entered:
-
-@itemize @bullet
-@item @code{\version}
-@item @code{\include}
-@item @code{\encoding}
-@item @code{\renameinput}
-@end itemize
projects / lilypond.git / blobdiff