@c -*- coding: utf-8; mode: texinfo; -*-
@c This file is part of lilypond.tely
+@ignore
+ Translation of GIT committish: FILL-IN-HEAD-COMMITTISH
+
+ When revising a translation, copy the HEAD committish of the
+ version that you are working on. See TRANSLATION for details.
+@end ignore
+
@c A menu is needed before every deeper *section nesting of @node's; run
@c M-x texinfo-all-menus-update
@menu
* Pitches::
* Rhythms::
-* Multiple notes at once::
+* Polyphony::
* Staff notation::
* Connecting notes::
* Expressive marks::
* Accidentals::
* Cautionary accidentals::
* Micro tones::
-* Notes names in other languages::
+* Note names in other languages::
* Relative octaves::
* Octave check::
* Transpose::
@funindex ,
The optional octave specification takes the form of a series of
-single quote (`@code{'}') characters or a series of comma
-(`@code{,}') characters. Each @code{'} raises the pitch by one
-octave; each @code{,} lowers the pitch by an octave.
+single quote (@samp{'}) characters or a series of comma
+(@samp{,}) characters. Each @samp{'} raises the pitch by one
+octave; each @samp{,} lowers the pitch by an octave.
@lilypond[quote,ragged-right,fragment,verbatim]
\clef treble
a4 aes a2
@end lilypond
-The input @code{d e f} is interpreted as ``print a D-natural,
-E-natural, and an F-natural,'' regardless of the key
+The input @code{d e f} is interpreted as @q{print a D-natural,
+E-natural, and an F-natural,} regardless of the key
signature. For more information about the distinction between
musical content and the presentation of that content, see
-@ref{More about pitches}.
+@ref{Accidentals and key signatures}.
@lilypond[fragment,quote,ragged-right,verbatim,relative]
\key d \major
can be forced by adding an exclamation mark @code{!}
after the pitch. A cautionary accidental
(i.e., an accidental within parentheses) can be obtained by adding the
-question mark `@code{?}' after the pitch. These extra accidentals
+question mark @samp{?} after the pitch. These extra accidentals
can be used to produce natural signs, too.
@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
standard.
-@node Notes names in other languages
-@subsection Notes names in other languages
+@node Note names in other languages
+@subsection Note names in other languages
There are predefined sets of note names for various other languages.
To use them, include the language specific init file. For
@code{\transpose} may also be used to input written notes for a
transposing instrument. Pitches are normally entered into LilyPond
-in C (or ``concert pitch''), but they may be entered in another
+in C (or @q{concert pitch}), but they may be entered in another
key. For example, when entering music for a B-flat trumpet which
begins on concert D, one would write
@funindex \skip
@funindex s
-An invisible rest (also called a `skip') can be entered like a note
-with note name `@code{s}' or with @code{\skip @var{duration}}
+An invisible rest (also called a @q{skip}) can be entered like a note
+with note name @samp{s} or with @code{\skip @var{duration}}
@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
a4 a4 s4 a4 \skip 1 a4
@funindex .
-To obtain dotted note lengths, simply add a dot (`@code{.}') to
+To obtain dotted note lengths, simply add a dot (@samp{.}) to
the number. Double-dotted notes are produced in a similar way.
@lilypond[quote,ragged-right,fragment,verbatim]
@subsection Scaling durations
You can alter the length of duration by a fraction @var{N/M}
-appending `@code{*}@var{N/M}' (or `@code{*}@var{N}' if @var{M=1}). This
+appending @samp{*@var{N/M}} (or @samp{*@var{N}} if @var{M=1}). This
will not affect the appearance of the notes or rests produced.
In the following example, the first three notes take up exactly two
@funindex |
Bar checks help detect errors in the durations. A bar check is
-entered using the bar symbol, `@code{|}'. Whenever it is encountered
+entered using the bar symbol, @samp{|}. Whenever it is encountered
during interpretation, it should fall on a measure boundary. If it
does not, a warning is printed. In the next example, the second bar
check will signal an error
Program reference: @internalsref{Completion_heads_engraver}.
-@node Multiple notes at once
-@section Multiple notes at once
+@node Polyphony
+@section Polyphony
Polyphony in music refers to having more than one voice occurring in
a piece of music. Polyphony in LilyPond refers to having more than
@end lilypond
The separator causes @internalsref{Voice} contexts@footnote{Polyphonic
-voices are sometimes called ``layers'' in other notation packages}
+voices are sometimes called @q{layers} in other notation packages}
@cindex layers
to be instantiated. They bear the names @code{"1"}, @code{"2"}, etc. In
each of these contexts, vertical direction of slurs, stems, etc., is set
Here, @var{type} should be @code{\major} or @code{\minor} to get
@var{pitch}-major or @var{pitch}-minor, respectively. You may also
-use the standard mode names (also called ``church modes''): @code{\ionian},
+use the standard mode names (also called @q{church modes}): @code{\ionian},
@code{\locrian}, @code{\aeolian}, @code{\mixolydian}, @code{\lydian},
@code{\phrygian}, and @code{\dorian}.
Accidentals and key signatures often confuse new users, because
unaltered notes get natural signs depending on the key signature. For
-more information, see @ref{Accidentals} or @ref{More about pitches}.
+more information, see @ref{Accidentals} or @ref{Accidentals and key signatures}.
@lilypond[quote,ragged-right,verbatim,relative=2,fragment]
\key g \major
The property @code{measurePosition} contains a rational number
indicating how much of the measure has passed at this point. Note
that this is a negative number; @code{\partial 4} is internally
-translated to mean ``there is a quarter note left in the bar''.
+translated to mean @qq{there is a quarter note left in the bar.}
@refbugs
@cindex adjusting staff symbol
Notes, dynamic signs, etc., are grouped
-with a set of horizontal lines, called a staff (plural `staves'). In
+with a set of horizontal lines, called a staff (plural @q{staves}). In
LilyPond, these lines are drawn using a separate layout object called
@code{staff symbol}.
A tie connects two adjacent note heads of the same pitch. The tie in
effect extends the length of a note. Ties should not be confused with
slurs, which indicate articulation, or phrasing slurs, which indicate
-musical phrasing. A tie is entered using the tilde symbol `@code{~}'
+musical phrasing. A tie is entered using the tilde symbol @samp{~}
@lilypond[quote,ragged-right,fragment,verbatim]
e' ~ e' <c' e' g'> ~ <c' e' g'>
Unlike @code{\acciaccatura} and @code{\appoggiatura}, the
@code{\grace} command does not start a slur.
-Internally, timing for grace notes is done using a second, `grace'
+Internally, timing for grace notes is done using a second, @q{grace}
timing. Every point in time consists of two rational numbers: one
denotes the logical time, one denotes the grace timing. The above
example is shown here with timing tuples
c1 \afterGrace d1 { c16[ d] } c4
@end lilypond
-This will put the grace notes after a ``space'' lasting 3/4 of the
+This will put the grace notes after a @q{space} lasting 3/4 of the
length of the main note. The fraction 3/4 can be changed by setting
@code{afterGraceFraction}, ie.
In the following example, the first ending is not a complete
bar (it only had 3 beats). The beginning of the second ending
-contains the 4th beat from the first ending. This ``extra''
+contains the 4th beat from the first ending. This @q{extra}
beat in the second ending is due to the first time ending,
and has nothing to do with the @code{\partial} at the
beginning of the example.
@funindex tremoloFlags
Tremolo marks can be printed on a single note by adding
-`@code{:}[@var{number}]' after the note. The number indicates the
+@q{@code{:}[@var{number}]} after the note. The number indicates the
duration of the subdivision, and it must be at least 8. A
@var{length} value of 8 gives one line across the note stem. If the
length is omitted, the last value (stored in @code{tremoloFlags}) is
projects / lilypond.git / blobdiff