@c -*- coding: utf-8; mode: texinfo; -*-
@c This file is part of lilypond.tely
+@ignore
+ Translation of GIT committish: FILL-IN-HEAD-COMMITTISH
+
+ When revising a translation, copy the HEAD committish of the
+ version that you are working on. See TRANSLATION for details.
+@end ignore
+
@c A menu is needed before every deeper *section nesting of @node's; run
@c M-x texinfo-all-menus-update
@menu
* Pitches::
* Rhythms::
-* Multiple notes at once::
+* Polyphony::
* Staff notation::
* Connecting notes::
* Expressive marks::
* Accidentals::
* Cautionary accidentals::
* Micro tones::
-* Notes names in other languages::
+* Note names in other languages::
* Relative octaves::
* Octave check::
* Transpose::
c1
@end lilypond
-@findex '
-@findex ,
+@funindex '
+@funindex ,
The optional octave specification takes the form of a series of
-single quote (`@code{'}') characters or a series of comma
-(`@code{,}') characters. Each @code{'} raises the pitch by one
-octave; each @code{,} lowers the pitch by an octave.
+single quote (@samp{'}) characters or a series of comma
+(@samp{,}) characters. Each @samp{'} raises the pitch by one
+octave; each @samp{,} lowers the pitch by an octave.
@lilypond[quote,ragged-right,fragment,verbatim]
\clef treble
@cindex note names, default
A sharp is formed by adding @code{-is} to the end of a pitch name and
-a flat is formed by adding @code{-es}
+a flat is formed by adding @code{-es}. Double sharps and double flats
+are obtained by adding @code{-isis} or @code{-eses} to a note name.
@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
a2 ais a aes
+a2 aisis a aeses
@end lilypond
-Double sharps and double flats
-are obtained by adding @code{-isis} or @code{-eses} to a note name. These
-are the Dutch note names. In Dutch, @code{aes} is contracted to
+@noindent
+These are the Dutch note names. In Dutch, @code{aes} is contracted to
@code{as}, but both forms are accepted. Similarly, both
@code{es} and @code{ees} are accepted
@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
-a2 aisis a aeses
+a2 as e es
@end lilypond
A natural will cancel the effect of an accidental or key signature.
a4 aes a2
@end lilypond
+The input @code{d e f} is interpreted as @q{print a D-natural,
+E-natural, and an F-natural,} regardless of the key
+signature. For more information about the distinction between
+musical content and the presentation of that content, see
+@ref{Accidentals and key signatures}.
+
+@lilypond[fragment,quote,ragged-right,verbatim,relative]
+\key d \major
+d e f g
+d e fis g
+@end lilypond
+
@commonprop
@cindex accidental, cautionary
@cindex accidental, parenthesized
@cindex reminder accidental
-@findex ?
+@funindex ?
@cindex cautionary accidental
@cindex parenthesized accidental
-@findex !
+@funindex !
Normally accidentals are printed automatically, but you may also
print them manually. A reminder accidental
can be forced by adding an exclamation mark @code{!}
after the pitch. A cautionary accidental
(i.e., an accidental within parentheses) can be obtained by adding the
-question mark `@code{?}' after the pitch. These extra accidentals
+question mark @samp{?} after the pitch. These extra accidentals
can be used to produce natural signs, too.
@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
standard.
-@node Notes names in other languages
-@subsection Notes names in other languages
+@node Note names in other languages
+@subsection Note names in other languages
There are predefined sets of note names for various other languages.
To use them, include the language specific init file. For
and the note names they define are
@c what about micro-tunes, double-sharps, and double-flats? add
-@c more clumns to the table?
+@c more columns to the table?
@c Oh, and should this be made into a multitable?
@cindex note names, other languages
@example
@cindex Relative
@cindex Relative octave specification
-@findex \relative
+@funindex \relative
Octaves are specified by adding @code{'} and @code{,} to pitch names.
When you copy existing music, it is easy to accidentally put a pitch
@end lilypond
Octave changing marks are used for intervals greater than a fourth
+
@lilypond[quote,ragged-right,fragment,verbatim]
\relative c'' {
c g c f, c' a, e''
}
@end lilypond
-The pitch after the @code{\relative} contains a note name.
+The pitch after @code{\relative} contains a note name.
The relative conversion will not affect @code{\transpose},
@code{\chordmode} or @code{\relative} sections in its argument. To use
@end example
This checks that @var{pitch} (without quotes) yields @var{pitch} (with
-quotes) in @code{\relative} mode. If not, a warning is printed, and the
+quotes) in @code{\relative} mode compared to the note given in the
+@code{\relative} command. If not, a warning is printed, and the
octave is corrected. The @var{pitch} is not printed as a note.
In the example below, the first check passes without incident, since
-the @code{e} (in relative mode) is within a fifth of @code{a'}. However,
+the @code{e} (in @code{relative} mode) is within a fifth of
+@code{a'}. However,
the second check produces a warning, since the @code{e} is not within
a fifth of @code{b'}. The warning message is printed, and the octave
is adjusted so that the following notes are in the correct octave
@cindex Transpose
@cindex Transposition of pitches
-@findex \transpose
+@funindex \transpose
A music expression can be transposed with @code{\transpose}. The
syntax is
@code{\transpose} may also be used to input written notes for a
transposing instrument. Pitches are normally entered into LilyPond
-in C (or ``concert pitch''), but they may be entered in another
+in C (or @q{concert pitch}), but they may be entered in another
key. For example, when entering music for a B-flat trumpet which
begins on concert D, one would write
\transpose c bes @{ e4 @dots{} @}
@end example
-To print this music in B-flat again (i.e. producing a trumpet part,
+To print this music in B-flat again (i.e., producing a trumpet part,
instead of a concert pitch conductor's score) you would wrap the
existing music with another @code{transpose}
Program reference: @internalsref{TransposedMusic}.
+Example: @inputfileref{input/@/test,smart@/-transpose@/.ly}.
+
@refbugs
If you want to use both @code{\transpose} and @code{\relative},
you must put @code{\transpose} outside of @code{\relative}, since
-@code{\relative} will have no effect music that appears inside a
+@code{\relative} will have no effect on music that appears inside a
@code{\transpose}.
@subsection Rests
@cindex Rests
-@findex \rest
-@findex r
+@funindex \rest
+@funindex r
Rests are entered like notes with the note name @code{r}
@cindex Skip
@cindex Invisible rest
@cindex Space note
-@findex \skip
-@findex s
+@funindex \skip
+@funindex s
-An invisible rest (also called a `skip') can be entered like a note
-with note name `@code{s}' or with @code{\skip @var{duration}}
+An invisible rest (also called a @q{skip}) can be entered like a note
+with note name @samp{s} or with @code{\skip @var{duration}}
@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
a4 a4 s4 a4 \skip 1 a4
@subsection Durations
@cindex duration
-@findex \longa
-@findex \breve
-@findex \maxima
+@funindex \longa
+@funindex \breve
+@funindex \maxima
In Note, Chord, and Lyrics mode, durations are designated by numbers and
dots: durations are entered as their reciprocal values. For example, a
quarter note is entered using a @code{4} (since it is a 1/4 note), while
a half note is entered using a @code{2} (since it is a 1/2 note). For
-notes longer than a whole you must use the variables @code{\longa} and
-@code{\breve}
+notes longer than a whole you must use the @code{\longa} and
+@code{\breve} commands
@example
c'\breve
}
\layout {
ragged-right = ##t
+ indent=0\mm
+ \context {
+ \Score
+ \remove "Bar_number_engraver"
+ }
\context {
\Staff
\remove "Clef_engraver"
@node Augmentation dots
@subsection Augmentation dots
-@findex .
+@funindex .
-To obtain dotted note lengths, simply add a dot (`@code{.}') to
+To obtain dotted note lengths, simply add a dot (@samp{.}) to
the number. Double-dotted notes are produced in a similar way.
@lilypond[quote,ragged-right,fragment,verbatim]
situations. The following commands may be used to force a particular
direction manually
-@findex \dotsUp
+@funindex \dotsUp
@code{\dotsUp},
-@findex \dotsDown
+@funindex \dotsDown
@code{\dotsDown},
-@findex \dotsNeutral
+@funindex \dotsNeutral
@code{\dotsNeutral}.
@seealso
@cindex tuplets
@cindex triplets
-@findex \times
+@funindex \times
Tuplets are made out of a music expression by multiplying all durations
with a fraction
Tuplets may be nested, for example,
@lilypond[fragment,ragged-right,verbatim,relative=2]
-\set tupletNumberFormatFunction = #fraction-tuplet-formatter
+\override TupletNumber #'text = #tuplet-number::calc-fraction-text
\times 4/6 {
a4 a
\times 3/5 { a a a a a }
@refcommands
-@findex \tupletUp
+@funindex \tupletUp
@code{\tupletUp},
-@findex \tupletDown
+@funindex \tupletDown
@code{\tupletDown},
-@findex \tupletNeutral
+@funindex \tupletNeutral
@code{\tupletNeutral}.
@commonprop
-@findex tupletNumberFormatFunction
+@funindex tupletNumberFormatFunction
@cindex tuplet formatting
The property @code{tupletSpannerDuration} specifies how long each
For more information about @code{make-moment}, see
@ref{Time administration}.
-The format of the number is determined by the property
-@code{tupletNumberFormatFunction}. The default prints only the
-denominator, but if it is set to the Scheme function
-@code{fraction-tuplet-formatter}, @var{num}:@var{den} will be printed
-instead.
+The format of the number is determined by the property @code{text} in
+@code{TupletNumber}. The default prints only the denominator, but if
+it is set to the function @code{tuplet-number::calc-fraction-text},
+@var{num}:@var{den} will be printed instead.
To avoid printing tuplet numbers, use
\times 2/3 { c8 c c } \times 2/3 { c8 c c }
@end lilypond
+Tuplet brackets can be made to run to prefatory matter or
+the next note
+
+@lilypond[ragged-right]
+\new RhythmicStaff {
+ \set tupletFullLength = ##t
+ \time 4/4
+ \times 4/5 {
+ c4 c1
+ }
+ \set tupletFullLengthNote = ##t
+ \time 2/4
+ \times 2/3 {
+ c4 c c
+ }
+ \time 3/4
+ c4
+}
+@end lilypond
+
@seealso
@subsection Scaling durations
You can alter the length of duration by a fraction @var{N/M}
-appending `@code{*}@var{N/M}' (or `@code{*}@var{N}' if @var{M=1}). This
+appending @samp{*@var{N/M}} (or @samp{*@var{N}} if @var{M=1}). This
will not affect the appearance of the notes or rests produced.
In the following example, the first three notes take up exactly two
@subsection Bar check
@cindex Bar check
-@findex barCheckSynchronize
-@findex |
+@funindex barCheckSynchronize
+@funindex |
Bar checks help detect errors in the durations. A bar check is
-entered using the bar symbol, `@code{|}'. Whenever it is encountered
+entered using the bar symbol, @samp{|}. Whenever it is encountered
during interpretation, it should fall on a measure boundary. If it
does not, a warning is printed. In the next example, the second bar
check will signal an error
especially if the score is polyphonic, so a good place to start correcting
input is by scanning for failed bar checks and incorrect durations.
-@findex |
-@findex pipeSymbol
+@funindex |
+@funindex pipeSymbol
It is also possible to redefine the meaning of @code{|}. This is done
by assigning a music expression to @code{pipeSymbol},
not entirely filled, then the ties exactly show how much each measure
is off.
+If you want to allow line breaking on the bar lines where
+@internalsref{Completion_heads_engraver} splits notes, you must
+also remove @internalsref{Forbid_line_breaks_engraver}.
+
@refbugs
Program reference: @internalsref{Completion_heads_engraver}.
-@node Multiple notes at once
-@section Multiple notes at once
+@node Polyphony
+@section Polyphony
Polyphony in music refers to having more than one voice occurring in
a piece of music. Polyphony in LilyPond refers to having more than
@cindex Chords
-A chord is formed by a enclosing a set of pitches in @code{<} and
-@code{>}. A chord may be followed by a duration, and a set of
+A chord is formed by a enclosing a set of pitches between @code{<}
+and @code{>}. A chord may be followed by a duration, and a set of
articulations, just like simple notes
@lilypond[verbatim,ragged-right,fragment,quote,relative=1]
@refcommands
-@findex \stemUp
+@funindex \stemUp
@code{\stemUp},
-@findex \stemDown
+@funindex \stemDown
@code{\stemDown},
-@findex \stemNeutral
+@funindex \stemNeutral
@code{\stemNeutral}.
is to enter each voice as a sequence (with @code{@{...@}}), and combine
them simultaneously, separating the voices with @code{\\}
-@findex \\
+@funindex \\
@lilypond[quote,verbatim,fragment]
\new Staff \relative c' {
@end lilypond
The separator causes @internalsref{Voice} contexts@footnote{Polyphonic
-voices are sometimes called ``layers'' in other notation packages}
+voices are sometimes called @q{layers} in other notation packages}
@cindex layers
to be instantiated. They bear the names @code{"1"}, @code{"2"}, etc. In
each of these contexts, vertical direction of slurs, stems, etc., is set
voice in the first @code{<< \\ >>} construct is effective in the second
@code{<< \\ >>}, and the voice is tied across the two constructs.
+@cindex note heads, styles
+
@lilypond[quote,verbatim,fragment]
\new Staff \relative c' {
\override NoteHead #'style = #'cross
c8 c4. } \\ { c2 c2 } >>
@end lilypond
+@noindent
+@code{merge-differently-headed} and @code{merge-differently-dotted}
+only apply to opposing stem directions (ie. Voice 1 & 2).
+
LilyPond also vertically shifts rests that are opposite of a stem,
for example
@refcommands
-@findex \oneVoice
+@funindex \oneVoice
@code{\oneVoice},
-@findex \voiceOne
+@funindex \voiceOne
@code{\voiceOne},
-@findex \voiceTwo
+@funindex \voiceTwo
@code{\voiceTwo},
-@findex \voiceThree
+@funindex \voiceThree
@code{\voiceThree},
-@findex \voiceFour
+@funindex \voiceFour
@code{\voiceFour}.
-@findex \shiftOn
+@funindex \shiftOn
@code{\shiftOn},
-@findex \shiftOnn
+@funindex \shiftOnn
@code{\shiftOnn},
-@findex \shiftOnnn
+@funindex \shiftOnnn
@code{\shiftOnnn},
-@findex \shiftOff
+@funindex \shiftOff
@code{\shiftOff}: these commands specify in what chords of the current
voice should be shifted. The outer voices (normally: voice one and
two) have @code{\shiftOff}, while the inner voices (three and four)
* Unmetered music::
* System start delimiters::
* Staff symbol::
+* Writing music in parallel::
@end menu
@node Clef
@subsection Clef
-@findex \clef
+@funindex \clef
The clef indicates which lines of the staff correspond to which
pitches. The clef is set with the @code{\clef} command
@seealso
+Manual: @ref{Grace notes}.
+
Program reference: @internalsref{Clef}.
@subsection Key signature
@cindex Key signature
-@findex \key
+@funindex \key
The key signature indicates the tonality in which a piece is played. It
is denoted by a set of alterations (flats or sharps) at the start of the
@code{\key} @var{pitch} @var{type}
@end example
-@findex \minor
-@findex \major
-@findex \minor
-@findex \ionian
-@findex \locrian
-@findex \aeolian
-@findex \mixolydian
-@findex \lydian
-@findex \phrygian
-@findex \dorian
+@funindex \minor
+@funindex \major
+@funindex \minor
+@funindex \ionian
+@funindex \locrian
+@funindex \aeolian
+@funindex \mixolydian
+@funindex \lydian
+@funindex \phrygian
+@funindex \dorian
@cindex church modes
Here, @var{type} should be @code{\major} or @code{\minor} to get
@var{pitch}-major or @var{pitch}-minor, respectively. You may also
-use the standard mode names (also called ``church modes''): @code{\ionian},
+use the standard mode names (also called @q{church modes}): @code{\ionian},
@code{\locrian}, @code{\aeolian}, @code{\mixolydian}, @code{\lydian},
@code{\phrygian}, and @code{\dorian}.
Accidentals and key signatures often confuse new users, because
unaltered notes get natural signs depending on the key signature. For
-more information, see @ref{More about pitches}.
+more information, see @ref{Accidentals} or @ref{Accidentals and key signatures}.
+
+@lilypond[quote,ragged-right,verbatim,relative=2,fragment]
+\key g \major
+f1
+fis
+@end lilypond
@commonprop
@cindex Time signature
@cindex meter
-@findex \time
+@funindex \time
Time signature indicates the metrum of a piece: a regular pattern of
strong and weak beats. It is denoted by a fraction at the start of the
@cindex partial measure
@cindex measure, partial
@cindex shorten measures
-@findex \partial
+@funindex \partial
Partial measures, such as an anacrusis or upbeat, are entered using the
\partial @var{duration}
@end example
+where @code{duration} is the rhythmic length to be added before
+the next bar.
+
This is internally translated into
@example
@end example
The property @code{measurePosition} contains a rational number
-indicating how much of the measure has passed at this point.
+indicating how much of the measure has passed at this point. Note
+that this is a negative number; @code{\partial 4} is internally
+translated to mean @qq{there is a quarter note left in the bar.}
@refbugs
a2 g2
@end lilypond
+@code{\partial} is only intended to be used at the beginning of a
+piece. If you use it after the beginning, some odd warnings may
+occur.
+
@node Bar lines
@subsection Bar lines
@cindex Bar lines
-@findex \bar
+@funindex \bar
@cindex measure lines
@cindex repeat bars
@noindent
This will insert an invisible bar line and allow line breaks at this
-point.
+point (without increasing the bar number counter).
In scores with many staves, a @code{\bar} command in one staff is
automatically applied to all staves. The resulting bar lines are
-connected between different staves of a StaffGroup
+connected between different staves of a @code{StaffGroup},
+@code{PianoStaff}, or @code{ChoirStaff}.
@lilypond[quote,ragged-right,fragment,verbatim]
<<
@commonprop
-@findex whichBar
-@findex repeatCommands
-@findex defaultBarType
+@funindex whichBar
+@funindex repeatCommands
+@funindex defaultBarType
The command @code{\bar }@var{bartype} is a short cut for doing
@code{\set Timing.whichBar = }@var{bartype}. Whenever @code{whichBar}
Program reference: @internalsref{BarLine} (created at
@internalsref{Staff} level), @internalsref{SpanBar} (across staves).
-Examples: @inputfileref{input/@/test,bar@/-lines@/.ly},
-
@node Unmetered music
@subsection Unmetered music
@cindex cadenza
-@findex \cadenzaOn
-@findex \cadenzaOff
+@funindex \cadenzaOn
+@funindex \cadenzaOff
Bar lines and bar numbers are calculated automatically. For unmetered
music (cadenzas, for example), this is not desirable. To turn off
@refbugs
-LilyPond will only insert page breaks at a barline. Unless the unmetered
-music ends before the end of the staff line, you will need to insert
+LilyPond will only insert line breaks and page breaks at a
+barline. Unless the unmetered music ends before the end of
+the staff line, you will need to insert
invisible bar lines
@example
@end example
@noindent
-to indicate where line breaks can occur.
+to indicate where breaks can occur.
@node System start delimiters
@internalsref{SystemStartBar}, @internalsref{SystemStartBrace}, and
@internalsref{SystemStartBracket}. Only one of these types is created
in every context, and that type is determined by the property
-@code{systemStartDelimiter}.
+@internalsref{systemStartDelimiter}.
+
+
+@commonprop
+
+System start delimiters may be deeply nested,
+
+@lilypond[quote,ragged-right,verbatim]
+\new StaffGroup
+\relative <<
+ \set StaffGroup.systemStartDelimiterHierarchy
+ = #'(SystemStartSquare (SystemStartBracket a (SystemStartSquare b)) d)
+ \new Staff { c1 }
+ \new Staff { c1 }
+ \new Staff { c1 }
+ \new Staff { c1 }
+ \new Staff { c1 }
+>>
+@end lilypond
@node Staff symbol
@cindex adjusting staff symbol
Notes, dynamic signs, etc., are grouped
-with a set of horizontal lines, called a staff (plural `staves'). In
+with a set of horizontal lines, called a staff (plural @q{staves}). In
LilyPond, these lines are drawn using a separate layout object called
-staff symbol.
+@code{staff symbol}.
The staff symbol may be tuned in the number, thickness and distance
of lines, using properties. This is demonstrated in the example files
@end lilypond
In combination with Frenched staves, this may be used to typeset ossia
-sections. An example is in @inputfileref{input/@/test@/,ossia.ly},
-shown here
+sections. An example is shown here
@cindex ossia
@inputfileref{input/@/regression,staff@/-line@/-positions@/.ly}.
+@node Writing music in parallel
+@subsection Writing music in parallel
+
+@cindex Writing music in parallel
+@cindex Interleaved music
+
+Music for multiple parts can be interleaved
+
+@lilypond[quote,fragment,verbatim]
+\parallelMusic #'(voiceA voiceB) {
+ r8 g'16[ c''] e''[ g' c'' e''] r8 g'16[ c''] e''[ g' c'' e''] |
+ c'2 c'2 |
+ r8 a'16[ d''] f''[ a' d'' f''] r8 a'16[ d''] f''[ a' d'' f''] |
+ c'2 c'2 |
+}
+\new StaffGroup <<
+ \new Staff \new Voice \voiceA
+ \new Staff \new Voice \voiceB
+>>
+@end lilypond
+
+This works quite well for piano music
+
+@lilypond[quote,verbatim]
+music = {
+ \key c \major
+ \time 4/4
+ \parallelMusic #'(voiceA voiceB voiceC voiceD) {
+ % Bar 1
+ r8 g'16[ c''] e''[ g' c'' e''] r8 g'16[ c''] e''[ g' c''
+e''] |
+ c'2 c'2 |
+ r8 a16[ d'] f'[ a d' f'] r8 a16[ d'] f'[ a d' f'] |
+ c2 c2 |
+
+ % Bar 2
+ a'8 b' c'' d'' e'' f'' g'' a'' |
+ d'4 d' d' d' |
+ c16 d e f d e f g e f g a f g a b |
+ a,4 a,4 a,4 a,4 |
+
+ % Bar 3 ...
+ }
+}
+
+\score {
+ \new PianoStaff <<
+ \music
+ \new Staff <<
+ \voiceA \\
+ \voiceB
+ >>
+ \new Staff {
+ \clef bass
+ <<
+ \voiceC \\
+ \voiceD
+ >>
+ }
+ >>
+}
+@end lilypond
+
@node Connecting notes
@section Connecting notes
@subsection Ties
@cindex tie
-@findex ~
+@funindex ~
A tie connects two adjacent note heads of the same pitch. The tie in
effect extends the length of a note. Ties should not be confused with
slurs, which indicate articulation, or phrasing slurs, which indicate
-musical phrasing. A tie is entered using the tilde symbol `@code{~}'
+musical phrasing. A tie is entered using the tilde symbol @samp{~}
@lilypond[quote,ragged-right,fragment,verbatim]
e' ~ e' <c' e' g'> ~ <c' e' g'>
@end lilypond
When a tie is applied to a chord, all note heads whose pitches match
-are connected. When no note heads match, no ties will be created.
+are connected. When no note heads match, no ties will be created. Chords
+may be partially tied by placing the tie inside the chord,
+
+@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
+<c~ e g~ b> <c e g b>
+@end lilypond
A tie is just a way of extending a note duration, similar to the
augmentation dot. The following example shows two ways of notating
mechanism automatically splits long notes, and ties them across bar
lines.
+@funindex \repeatTie
+
When a second alternative of a repeat starts with a tied note, you
have to repeat the tie. This can be achieved with @code{\repeatTie},
@code{tieWaitForNote} property to true. The same feature is also useful,
for example, to tie a tremolo to a chord. For example,
-@lilypond[fragment,verbatim,relative=1,ragged-right]
+@lilypond[fragment,verbatim,relative=1,ragged-right,quote]
\set tieWaitForNote = ##t
\grace { c16[~ e~ g]~ } <c, e g>2
\repeat "tremolo" 8 { c32~ c'~ } <c c,>1
+e8~ c~ a~ f~ <e' c a f>2
+@end lilypond
+
+Ties may be engraved manually by changing the @code{tie-configuration}
+property. The first number indicates the distance from the center
+of the staff in staff-spaces, and the second number indicates the
+direction (1=up, -1=down).
+
+@lilypond[fragment,verbatim,relative=1,ragged-right,quote]
+<c e g>2~ <c e g> |
+\override TieColumn #'tie-configuration =
+ #'((0.0 . 1) (-2.0 . 1) (-4.0 . 1))
+<c e g>~ <c e g> |
@end lilypond
@refcommands
-@findex \tieUp
+@funindex \tieUp
@code{\tieUp},
-@findex \tieDown
+@funindex \tieDown
@code{\tieDown},
-@findex \tieNeutral
+@funindex \tieNeutral
@code{\tieNeutral},
-@findex \tieDotted
+@funindex \tieDotted
@code{\tieDotted},
-@findex \tieDashed
+@funindex \tieDashed
@code{\tieDashed},
-@findex \tieSolid
+@funindex \tieSolid
@code{\tieSolid}.
Switching staves when a tie is active will not produce a slanted tie.
+Changing clefs or octavations during a tie is not really
+well-defined. In these cases, a slur may be preferable.
+
@node Slurs
@subsection Slurs
@refcommands
-@findex \slurUp
+@funindex \slurUp
@code{\slurUp},
-@findex \slurDown
+@funindex \slurDown
@code{\slurDown},
-@findex \slurNeutral
+@funindex \slurNeutral
@code{\slurNeutral},
-@findex \slurDashed
+@funindex \slurDashed
@code{\slurDashed},
-@findex \slurDotted
+@funindex \slurDotted
@code{\slurDotted},
-@findex \slurSolid
+@funindex \slurSolid
@code{\slurSolid}.
@seealso
@refcommands
-@findex \phrasingSlurUp
+@funindex \phrasingSlurUp
@code{\phrasingSlurUp},
-@findex \phrasingSlurDown
+@funindex \phrasingSlurDown
@code{\phrasingSlurDown},
-@findex \phrasingSlurNeutral
+@funindex \phrasingSlurNeutral
@code{\phrasingSlurNeutral}.
@subsection Manual beams
@cindex beams, manual
-@findex ]
-@findex [
+@funindex ]
+@funindex [
In some cases it may be necessary to override the automatic beaming
algorithm. For example, the autobeamer will not put beams over rests
@commonprop
-@findex stemLeftBeamCount
-@findex stemRightBeamCount
+@funindex stemLeftBeamCount
+@funindex stemRightBeamCount
Normally, beaming patterns within a beam are determined automatically.
If necessary, the properties @code{stemLeftBeamCount} and
\set Score.beatLength = #(ly:make-moment 1 8)
c16[ c c c c c c c]
@end lilypond
-@findex subdivideBeams
+@funindex subdivideBeams
@noindent
For more information about @code{make-moment}, see
Line breaks are normally forbidden when beams cross bar lines. This
behavior can be changed by setting @code{allowBeamBreak}.
-@findex allowBeamBreak
+@funindex allowBeamBreak
@cindex beams and line breaks
@cindex beams, kneed
@cindex kneed beams
@node Grace notes
@subsection Grace notes
-@findex \grace
+@funindex \grace
@cindex ornaments
@cindex grace notes
@cindex appoggiatura
Unlike @code{\acciaccatura} and @code{\appoggiatura}, the
@code{\grace} command does not start a slur.
-Internally, timing for grace notes is done using a second, `grace'
+Internally, timing for grace notes is done using a second, @q{grace}
timing. Every point in time consists of two rational numbers: one
denotes the logical time, one denotes the grace timing. The above
example is shown here with timing tuples
\new Staff { c4 \grace { g8[ b] } c4 } >>
@end lilypond
-@findex \afterGrace
+@funindex \afterGrace
If you want to end a note with a grace, use the @code{\afterGrace}
command. It takes two arguments: the main note, and the grace notes
c1 \afterGrace d1 { c16[ d] } c4
@end lilypond
-This will put the grace notes after a ``space'' lasting 3/4 of the
+This will put the grace notes after a @q{space} lasting 3/4 of the
length of the main note. The fraction 3/4 can be changed by setting
@code{afterGraceFraction}, ie.
for example, to produce smaller type, and set directions. Hence, when
introducing layout tweaks, they should be inside the grace section,
for example,
+
@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
\new Voice {
\acciaccatura {
The layout of grace sections can be changed throughout the music using
the function @code{add-grace-property}. The following example
-undefines the Stem direction for this grace, so stems do not always
-point up.
+undefines the @code{Stem} direction for this grace, so
+that stems do not always point up.
@example
\new Staff @{
The slash through the stem in acciaccaturas can be obtained
in other situations by @code{\override Stem #'stroke-style = #"grace"}.
+
+@commonprop
+
+Grace notes may be forced to use floating spacing,
+
+@lilypond[relative=2,ragged-right]
+<<
+ \override Score.SpacingSpanner #'strict-grace-spacing = ##t
+ \new Staff {
+ c'4
+ \afterGrace
+ c'4
+ { c'16[ c'8 c'16] }
+ c'4
+ }
+ \new Staff {
+ c'16[ c'16 c'16 c'16]
+ c'16[ c'16 c'16 c'16]
+ c'4
+ }
+>>
+@end lilypond
+
+
@seealso
Program reference: @internalsref{GraceMusic}.
* Trills::
* Glissando::
* Arpeggio::
+* Falls and doits::
@end menu
@subsection Dynamics
@cindex Dynamics
-@findex \pppp
-@findex \ppp
-@findex \pp
-@findex \p
-@findex \mp
-@findex \mf
-@findex \f
-@findex \ff
-@findex \fff
-@findex \ffff
-@findex \fp
-@findex \sf
-@findex \sff
-@findex \sp
-@findex \spp
-@findex \sfz
-@findex \rfz
+@funindex \pppp
+@funindex \ppp
+@funindex \pp
+@funindex \p
+@funindex \mp
+@funindex \mf
+@funindex \f
+@funindex \ff
+@funindex \fff
+@funindex \ffff
+@funindex \fp
+@funindex \sf
+@funindex \sff
+@funindex \sp
+@funindex \spp
+@funindex \sfz
+@funindex \rfz
Absolute dynamic marks are specified using a command after a note
@code{c4\ff}. The available dynamic marks are @code{\ppppp},
c2\fp c\sf c\sff c\sp c\spp c\sfz c\rfz
@end lilypond
-@findex \<
-@findex \>
-@findex \!
+@funindex \<
+@funindex \>
+@funindex \!
A crescendo mark is started with @code{\<} and terminated with
@code{\!} or an absolute dynamic. A decrescendo is started with
@end lilypond
@noindent
-A hairpin starts at the left edge of the beginning note and ends on the
-right edge of the ending note.
+A hairpin normally starts at the left edge of the beginning note
+and ends on the right edge of the ending note. If the ending
+note falls on the downbeat, the hairpin ends on the immediately
+preceding barline. This may be modified by setting the
+@code{hairpinToBarline} property,
+
+@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
+\set hairpinToBarline = ##f
+c4\< c2. c4\!
+@end lilypond
In some situations the @code{\espressivo} articulation mark may
be suitable to indicate a crescendo and decrescendo on the one note,
example
@example
-\override Staff.Hairpin #'minimum-length = #5
+\override Voice.Hairpin #'minimum-length = #5
@end example
+@cindex al niente
+@cindex niente, al
+
+Hairpins may be printed with a circled tip (al niente notation) by
+setting the @code{circled-tip} property,
+
+@lilypond[quote,ragged-right,fragment,relative=2,verbatim]
+\override Hairpin #'circled-tip = ##t
+c2\< c\!
+c4\> c\< c2\!
+@end lilypond
+
+
@cindex crescendo
@cindex decrescendo
@cindex diminuendo
-You can also use a text saying @emph{cresc.} instead of hairpins
+You can also use text saying @emph{cresc.} instead of hairpins
@lilypond[quote,ragged-right,fragment,relative=2,verbatim]
\setTextCresc
\override Score.Hairpin #'after-line-breaking = ##t
@end example
-Text style dynamic changes (such as cresc. and dim.) are printed with a
+Text style dynamic changes (such as @emph{cresc.} and @emph{dim.})
+are printed with a
dashed line showing their extent. To surpress printing this line, use
@example
@refcommands
-@findex \dynamicUp
+@funindex \dynamicUp
@code{\dynamicUp},
-@findex \dynamicDown
+@funindex \dynamicDown
@code{\dynamicDown},
-@findex \dynamicNeutral
+@funindex \dynamicNeutral
@code{\dynamicNeutral}.
Trills that should be executed on an explicitly specified pitch can be
typeset with the command @code{pitchedTrill},
-@lilypond[ragged-right,verbatim,fragment,relative=1]
+@lilypond[ragged-right,verbatim,fragment,relative=1,quote]
\pitchedTrill c4\startTrillSpan fis
f\stopTrillSpan
@end lilypond
@refcommands
@code{\startTrillSpan},
-@findex \startTrillSpan
+@funindex \startTrillSpan
@code{\stopTrillSpan}.
-@findex \stopTrillSpan
+@funindex \stopTrillSpan
@seealso
@subsection Glissando
@cindex Glissando
-@findex \glissando
+@funindex \glissando
A glissando is a smooth change in pitch. It is denoted by a line or a
wavy line between two notes. It is requested by attaching
@cindex Arpeggio
@cindex broken chord
-@findex \arpeggio
+@funindex \arpeggio
You can specify an arpeggio sign (also known as broken chord) on a
chord by attaching an @code{\arpeggio} to a chord
@refcommands
@code{\arpeggio},
-@findex \arpeggioUp
+@funindex \arpeggioUp
@code{\arpeggioUp},
-@findex \arpeggioDown
+@funindex \arpeggioDown
@code{\arpeggioDown},
-@findex \arpeggioNeutral
+@funindex \arpeggioNeutral
@code{\arpeggioNeutral},
-@findex \arpeggioBracket
+@funindex \arpeggioBracket
@code{\arpeggioBracket}.
arpeggios in one @internalsref{PianoStaff} at the same point in time.
+@node Falls and doits
+@subsection Falls and doits
+
+Falls and doits can be added to notes using the @code{\bendAfter}
+command,
+@lilypond[fragment,ragged-right,relative=2]
+\override Score.SpacingSpanner #'shortest-duration-space = #3.0
+c4-\bendAfter #+5
+c4-\bendAfter #-3
+@end lilypond
@node Repeats
@subsection Repeat types
@cindex repeats
-@findex \repeat
+@funindex \repeat
The following types of repetition are supported
for repeats with alternatives. These are not played in MIDI output by
default.
-@ignore
-@item fold
-Alternative endings are written stacked. This has limited use but may be
-used to typeset two lines of lyrics in songs with repeats, see
-@inputfileref{input,star-spangled-banner@/.ly}.
-@end ignore
@item tremolo
Make tremolo beams. These are not played in MIDI output by default.
@item percent
Make beat or measure repeats. These look like percent signs. These
are not played in MIDI output by default. Percent repeats must be
-declared within a Voice context.
+declared within a @code{Voice} context.
@end table
@node Repeat syntax
@subsection Repeat syntax
+@cindex volta
+@cindex prima volta
+@cindex seconda volta
+
LilyPond has one syntactic construct for specifying different types of
repeats. The syntax is
@end example
If you have alternative endings, you may add
-@findex \alternative
+@funindex \alternative
@example
\alternative @{
@var{alternative1}
is assumed to be played more than once.
Standard repeats are used like this
+
@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
c1
\repeat volta 2 { c4 d e f }
@end lilypond
With alternative endings
+
@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
c1
\repeat volta 2 {c4 d e f}
\alternative { {d2 d} {f f,} }
@end lilypond
-In this example, the first ending is not a complete bar (it
-only had 3 beats). The beginning of the second ending
-contains the 4th beat from the first ending. This ``extra''
+In the following example, the first ending is not a complete
+bar (it only had 3 beats). The beginning of the second ending
+contains the 4th beat from the first ending. This @q{extra}
beat in the second ending is due to the first time ending,
and has nothing to do with the @code{\partial} at the
beginning of the example.
}
@end lilypond
+@funindex \repeatTie
+
+Ties may be added to a second ending,
+
+@lilypond[quote,ragged-right,fragment,verbatim,relative=2]
+c1
+\repeat volta 2 {c4 d e f ~ }
+\alternative { {f2 d} {f\repeatTie f,} }
+@end lilypond
+
It is possible to shorten volta brackets
by setting @code{voltaSpannerDuration}. In the next example, the
bracket only lasts one measure, which is a duration of 3/4.
For clarity, it is advisable to use braces in such situations.
Timing information is not remembered at the start of an alternative,
-so after a repeat timing information must be reset by hand, for
-example by setting @code{Score.measurePosition} or entering
+so after a repeat timing information must be reset by hand; for
+example, by setting @code{Score.measurePosition} or entering
@code{\partial}. Similarly, slurs or ties are also not repeated.
+Volta brackets are not vertically aligned.
+
@node Repeats and MIDI
@subsection Repeats and MIDI
@cindex expanding repeats
-@findex \unfoldRepeats
+@funindex \unfoldRepeats
With a little bit of tweaking, all types of repeats can be present
in the MIDI output. This is achieved by applying the
-@code{\unfoldRepeats} music function. This functions changes all
+@code{\unfoldRepeats} music function. This function changes all
repeats to unfold repeats.
@lilypond[quote,verbatim,fragment,line-width=8.0\cm]
\bar "|."
@end lilypond
-When creating a score file using @code{\unfoldRepeats} for midi, then
-it is necessary to make two @code{\score} blocks. One for MIDI (with
+When creating a score file using @code{\unfoldRepeats} for MIDI,
+it is necessary to make two @code{\score} blocks: one for MIDI (with
unfolded repeats) and one for notation (with volta, tremolo, and
percent repeats). For example,
@node Manual repeat commands
@subsection Manual repeat commands
-@findex repeatCommands
+@funindex repeatCommands
The property @code{repeatCommands} can be used to control the layout of
repeats. Its value is a Scheme list of repeat commands.
@subsection Tremolo subdivisions
@cindex tremolo marks
-@findex tremoloFlags
+@funindex tremoloFlags
Tremolo marks can be printed on a single note by adding
-`@code{:}[@var{number}]' after the note. The number indicates the
+@q{@code{:}[@var{number}]} after the note. The number indicates the
duration of the subdivision, and it must be at least 8. A
@var{length} value of 8 gives one line across the note stem. If the
length is omitted, the last value (stored in @code{tremoloFlags}) is
-Isolated percents can also be printed. This is done by putting a multi
-measure rest with a different print function,
+Isolated percents can also be printed. This is done by putting a
+multi-measure rest with a different print function,
-@lilypond[fragment,verbatim]
+@lilypond[fragment,verbatim,quote]
\override MultiMeasureRest #'stencil
= #ly:multi-measure-rest::percent
R1