@c -*- coding: utf-8; mode: texinfo; -*-
@c This file is part of lilypond.tely
-@c A menu is needed before every deeper *section nesting of @node's; run
+@c A menu is needed before every deeper *section nesting of @node's; run
@c M-x texinfo-all-menus-update
@c to automatically fill in these menus before saving changes
* Orchestral music::
* Contemporary notation::
* Educational use::
-* Automatic notation::
@end menu
c4^"longtext" \fatText c4_"longlongtext" c4
@end lilypond
+@noindent
+To prevent text from influencing spacing, use @code{\emptyText}.
+
More complex formatting may also be added to a note by using the
markup command,
@lilypond[fragment,ragged-right,verbatim,quote]
@refcommands
-@cindex @code{\fatText}
+@funindex \fatText
@code{\fatText},
-@cindex @code{\emptyText}
+@funindex \emptyText
@code{\emptyText}.
@commonprop
-Checking to make sure that text scripts and lyrics are within the margins is a relatively large computational task. To speed up processing, lilypond does not perform such calculations by default; to enable it, use
+Checking to make sure that text scripts and lyrics are within the margins is
+a relatively large computational task. To speed up processing, lilypond does
+not perform such calculations by default; to enable it, use
@example
\override Score.PaperColumn #'keep-inside-line = ##t
@cindex textSpannerUp
@code{textSpannerUp},
-@cindex textSpannerDown
+@cindex textSpannerDown
@code{textSpannerDown},
@cindex textSpannerNeutral
@code{textSpannerNeutral}.
+@commonprop
+
+To print a solid line, use
+
+@example
+\override TextSpanner #'dash-fraction = #'()
+@end example
+
+
@seealso
Program reference: @internalsref{TextSpanner}.
@cindex segno on bar line
@cindex fermata on bar line
@cindex bar lines, symbols on
-@cindex @code{\mark}
+@funindex \mark
The @code{\mark} command is primarily used for
@ref{Rehearsal marks},
but it can also be used to put signs like coda,
segno, and fermata on a bar line. Use @code{\markup} to
-access the appropriate symbol
+access the appropriate symbol (symbols are listed in
+@ref{The Feta font})
@lilypond[fragment,quote,ragged-right,verbatim,relative=2]
c1 \mark \markup { \musicglyph #"scripts.ufermata" }
c1
\key cis \major
\clef alto
- \set Score.rehearsalMarkAlignSymbol = #'key-signature
+ \override Score.RehearsalMark #'break-align-symbol = #'key-signature
\mark "on key"
cis
\key ces \major
- \set Score.rehearsalMarkAlignSymbol = #'clef
+ \override Score.RehearsalMark #'break-align-symbol = #'clef
\clef treble
\mark "on clef"
ces
- \set Score.rehearsalMarkAlignSymbol = #'time-signature
+ \override Score.RehearsalMark #'break-align-symbol = #'time-signature
\key d \minor
\clef tenor
\time 3/4
}
@end lilypond
+Although text marks are normally only printed above the topmost
+staff, you may alter this to print them on every staff,
+
+@lilypond[quote,ragged-right,verbatim,relative=2]
+{
+ \new Score \with {
+ \remove "Mark_engraver"
+ }
+ <<
+ \new Staff \with {
+ \consists "Mark_engraver"
+ }
+ { c''1 \mark "foo" c'' }
+ \new Staff \with {
+ \consists "Mark_engraver"
+ }
+ { c'1 \mark "foo" c' }
+ >>
+}
+@end lilypond
+
@seealso
@lilypond[quote,verbatim,fragment,relative=1]
c1^\markup { hello }
c1_\markup { hi there }
-c1^\markup { hi \bold there, is \italic anyone home? }
-c1_\markup { "\special #characters" }
+c1^\markup { hi \bold there, is \italic {anyone home?} }
+c1_\markup { "\special {weird} #characters" }
@end lilypond
@noindent
Text can also be placed on its own, away from any @code{\score}
block. This is primarily used in a @code{\book} (see
-@ref{Multiple movements}).
+@ref{Multiple scores in a book}).
@lilypond[quote,ragged-right,verbatim]
\markup{ Here is some text. }
@cindex font switching
The markup in the example demonstrates font switching commands. The
-command @code{\bold} and @code{\italic} apply to the first following
+command @code{\bold} and @code{\italic} apply to the first following
word only; to apply a command to more than one word, enclose the
words with braces,
Lists with no previous command are not kept distinct. The expression
@example
-\center-align @{ @{ a b @} @{ c d @} @}
+\center-align @{ @{ a b @} @{ c d @} @}
@end example
@noindent
c'4^\markup{ \hspace #0 \raise #1.5 raised }
@end lilypond
+Some situations (such as dynamic marks) have preset font-related
+properties. If you are creating text in such situations, it
+is advisable to cancel those properties with
+@code{normal-text}. See @ref{Overview of text markup commands}
+for more details.
+
@seealso
@cindex font selection
@cindex font magnification
-@cindex @code{font-interface}
+@funindex font-interface
By setting the object properties described below, you can select a
font from the preconfigured font families. LilyPond has default
@itemize @bullet
@item @code{font-encoding}
is a symbol that sets layout of the glyphs. This should only be set to
-select different types of non-text fonts, eg.
+select different types of non-text fonts, e.g.
@code{fetaBraces} for piano staff braces, @code{fetaMusic} the
standard music font, including ancient glyphs, @code{fetaDynamic} for
@item @code{font-family}
is a symbol indicating the general class of the typeface. Supported are
@code{roman} (Computer Modern), @code{sans}, and @code{typewriter}.
-
+
@item @code{font-shape}
is a symbol indicating the shape of the font. There are typically
several font shapes available for each font family. Choices are
@item @code{font-series}
is a symbol indicating the series of the font. There are typically
several font series for each font family and shape. Choices are
-@code{medium} and @code{bold}.
+@code{medium} and @code{bold}.
@end itemize
Fonts selected in the way sketched above come from a predefined style
-sheet. If you want to use a font from outside the style sheet,
-then set the
-@code{font-name} property,
+sheet. If you want to use a font from outside the style sheet,
+then set the
+@code{font-name} property,
@lilypond[fragment,verbatim]
{
- \override Staff.TimeSignature #'font-name = #"Charter"
- \override Staff.TimeSignature #'font-size = #2
+% \override Staff.TimeSignature #'font-name = #"Charter"
+% \override Staff.TimeSignature #'font-size = #2
\time 3/4
c'1_\markup {
- \override #'(font-name . "Vera Bold")
- { This text is in Vera Bold }
+% \override #'(font-name . "Vera Bold")
+% { This text is in Vera Bold }
}
}
@end lilypond
@lilypond[verbatim]
\paper {
myStaffSize = #20
-
+
#(define fonts
(make-pango-font-tree "Times New Roman"
"Nimbus Sans"
@end lilypond
@c we don't do Helvetica / Courier, since GS incorrectly loads
-@c Apple TTF fonts
+@c Apple TTF fonts
@seealso
-Examples: @file{ly/@/font@/-family@/-override.ly}
+Examples: @inputfileref{input/@/regression,font@/-family@/-override.ly}.
@node New dynamic marks
@subsection New dynamic marks
It is possible to print new dynamic marks or text that should be aligned
-with dynamics. Use @code{make-dynamic-script} to create these marks.
+with dynamics. Use @code{make-dynamic-script} to create these
+marks. Note that the dynamic font only contains the characters
+@code{f,m,p,r,s} and @code{z}.
+
+Some situations (such as dynamic marks) have preset font-related
+properties. If you are creating text in such situations, it
+is advisable to cancel those properties with
+@code{normal-text}. See @ref{Overview of text markup commands}
+for more details.
@cindex make-dynamic-script
@cindex Rests, multi measure
@cindex Rests, full measure
@cindex whole rests for a full measure
-@cindex @code{R}
+@funindex R
Rests for one full measure (or many bars) are entered using `@code{R}'. It
is specifically meant for full bar rests and for entering parts: the rest
be expanded, and the appropriate number is added automatically
@lilypond[quote,ragged-right,fragment,verbatim]
-\time 4/4 r1 | R1 | R1*2
+\time 4/4 r1 | R1 | R1*2 \time 3/4 R2. \time 2/4 R2 \time 4/4
\set Score.skipBars = ##t R1*17 R1*4
@end lilypond
In the MIDI output, they are interpreted as a tempo change. In the
layout output, a metronome marking is printed
-@cindex @code{\tempo}
+@funindex \tempo
@lilypond[quote,ragged-right,verbatim,fragment]
\tempo 8.=120 c''1
@end lilypond
Collisions are not checked. If you have notes above the top line of
the staff (or notes with articulations, slurs, text, etc), then the
metronome marking may be printed on top of musical symbols. If this
-occurs, increase the padding of the metronome mark to place it
+occurs, increase the padding of the metronome mark to place it
further away from the staff.
@example
@subsection Rehearsal marks
@cindex Rehearsal marks
-@cindex @code{\mark}
+@funindex \mark
To print a rehearsal mark, use the @code{\mark} command
@end lilypond
The file @file{scm/@/translation@/-functions@/.scm} contains the definitions
-of @code{format-mark-numbers} (the default format), @code{format-mark-box-numbers},
+of @code{format-mark-numbers} (the default format),
+@code{format-mark-box-numbers},
@code{format-mark-letters} and @code{format-mark-box-letters}.
These can be used as inspiration for other formatting functions.
and @code{format-mark-circle-barnumbers} to get bar numbers instead of
incremented numbers or letters.
+@cindex segno
+@cindex coda
+@cindex D.S al Fine
+
+Music glyphs (such as the segno sign) may be printed inside
+a @code{\mark}
+
+@lilypond[fragment,quote,ragged-right,verbatim,relative]
+c1 \mark \markup { \musicglyph #"scripts.segno" }
+c1 \mark \markup { \musicglyph #"scripts.coda" }
+c1 \mark \markup { \musicglyph #"scripts.ufermata" }
+c1
+@end lilypond
+
+@noindent
+See @ref{The Feta font} for a list of symbols which may be
+printed with @code{\musicglyph}.
+
+The horizontal location of rehearsal marks can be adjusted by
+setting @code{break-align-symbol}
+
+@lilypond[fragment,quote,ragged-right,verbatim,relative]
+c1
+\key cis \major
+\clef alto
+\override Score.RehearsalMark #'break-align-symbol = #'key-signature
+\mark "on-key"
+cis
+\key ces \major
+\override Score.RehearsalMark #'break-align-symbol = #'clef
+\clef treble
+\mark "on clef"
+ces
+@end lilypond
+
+@code{break-align-symbol} may also accept the following values:
+@code{ambitus}, @code{breathing-sign}, @code{clef}, @code{custos},
+@code{staff-bar}, @code{left-edge}, @code{key-cancellation},
+@code{key-signature}, and @code{time-signature}. Setting
+@code{break-align-symbol} will only have an effect if the symbol
+appears at that point in the music.
+
@seealso
@cindex Bar numbers
@cindex measure numbers
-@cindex @code{currentBarNumber}
+@funindex currentBarNumber
Bar numbers are printed by default at the start of the line. The
number itself is stored in the @code{currentBarNumber} property, which
is normally updated automatically for every measure.
+@lilypond[verbatim,ragged-right,quote,fragment,relative]
+\repeat unfold 4 {c4 c c c} \break
+\set Score.currentBarNumber = #50
+\repeat unfold 4 {c4 c c c}
+@end lilypond
+
+Bar numbers may only be printed at bar lines; to print a bar
+number at the beginning of a piece, an empty bar line must
+be added
+
+@lilypond[verbatim,ragged-right,quote,fragment,relative]
+\set Score.currentBarNumber = #50
+\bar ""
+\repeat unfold 4 {c4 c c c} \break
+\repeat unfold 4 {c4 c c c}
+@end lilypond
+
Bar numbers can be typeset at regular intervals instead of at the
beginning of each line. This is illustrated in the following example,
whose source is available as
@lilypondfile[ragged-right,quote]{bar-number-regular-interval.ly}
-Bar numbers can be typeset manually by tweaking the
-@code{markFormatter} property
+Bar numbers can be removed entirely by removing the Bar number
+engraver from the score.
@lilypond[verbatim,ragged-right,quote]
-\relative c' {
- \set Score.markFormatter
- = #(lambda (mark context)
- (make-bold-markup
- (make-box-markup
- (number->string (ly:context-property context
- 'currentBarNumber)))))
-
- c1 \bar "||" \mark \default c1 c1 \mark \default c1 \bar "|."
+\layout {
+ \context {
+ \Score
+ \remove "Bar_number_engraver"
+ }
}
-@end lilypond
-
-Bar numbers can be manually changed by setting the
-@code{Staff.currentBarNumber} property
-
-@lilypond[verbatim,ragged-right,quote]
-\relative c' {
- \repeat unfold 4 {c4 c c c} \break
- \set Score.currentBarNumber = #50
- \repeat unfold 4 {c4 c c c}
+\relative c''{
+c4 c c c \break
+c4 c c c
}
@end lilypond
For longer instrument names, it may be useful to increase the
@code{indent} setting in the @code{\layout} block.
+To center instrument names while leaving extra space to the right,
+
+@lilypond[quote,verbatim,ragged-right]
+\new StaffGroup \relative
+<<
+ \new Staff {
+ \set Staff.instrument
+ = \markup { \hcenter-in #10 "blabla" }
+ c1 c1
+ }
+ \new Staff {
+ \set Staff.instrument
+ = \markup { \hcenter-in #10 "blo" }
+ c1 c1
+ }
+>>
+@end lilypond
+
+
@seealso
Program reference: @internalsref{InstrumentName}.
used to move the instrument names to the left, in such situations.
@example
-\override Score.InstrumentName #'space-alist = #'((left-edge extra-space . 2.0))
+\override Score.InstrumentName #'padding = #2.0
@end example
@node Different editions from one source
@subsection Different editions from one source
-@cindex @code{\tag}
+@funindex \tag
@cindex tag
The @code{\tag} command marks music expressions with a name. These
@lilypondfile[ragged-right,quote]{tag-filter.ly}
-The argument of the @code{\tag} command should be a symbol. It's
-possible to put multiple tags on a piece of music, with multiple
-@code{\tag} entries,
+The arguments of the @code{\tag} command should be a symbol
+(such as @code{#'score} or @code{#'part}), followed by a
+music expression. It is possible to put multiple tags on
+a piece of music with multiple @code{\tag} entries,
+
@example
\tag #'original-part \tag #'transposed-part @dots{}
@end example
Multiple rests are not merged if you create the score with both tagged
sections.
-
+
@node Orchestral music
@node Quoting other voices
@subsection Quoting other voices
+@cindex cues
+
With quotations, fragments of other parts can be inserted into a part
directly. Before a part can be quoted, it must be marked especially as
quotable. This is done with the @code{\addquote} command.
@node Formatting cue notes
@subsection Formatting cue notes
+@cindex cues, formatting
+
The previous section deals with inserting notes from another voice.
There is a more advanced music function called @code{\cueDuring},
which makes formatting cue notes easier.
\addquote clarinet \relative {
R1*20
r2 r8 c f f
-}
+}
\new Staff \relative <<
% setup a context for cue notes.
\new Voice = "cue" { \smaller \skip 1*21 }
-
+
\set Score.skipBars = ##t
-
+
\new Voice {
R1*20
\cueDuring #"clarinet" #1 {
R1
}
- g4 g2.
+ g4 g2.
}
>>
-@end lilypond
+@end lilypond
Here are a couple of hints for successful cue notes
@c Yes, this is good practice. Otherwise, the start of the original
@c part can only be seen from the font size. This is not good enough
@c for sight-reading. It is possilbe to use other
-@c markers (eg. a big close-bracket over the staff) to indicate the cue notes are
+@c markers (e.g. a big close-bracket over the staff) to indicate the cue
+@c notes are
@c finished.
@c -hwn
microtones, nested tuplet beams, and unusual fermatas, please
see those sections of the documentation.
-
-@c I don't think we should discourage modern composers who might
-@c want to sponsor new features. :)
-@c In general, the use of new, innovative notation makes a piece
-@c harder to understand and perform and its use should therefore be
-@c avoided. For this reason, support for contemporary notation in
-@c LilyPond is limited.
-
-
@menu
* Polymetric notation::
* Time administration::
* Special noteheads::
* Feathered beams::
* Improvisation::
+* Selecting notation font size::
@end menu
Double time signatures are not supported explicitly, but they can be
faked. In the next example, the markup for the time signature is
created with a markup text. This markup text is inserted in the
-@internalsref{TimeSignature} grob.
+@internalsref{TimeSignature} grob. See also
+@inputfileref{input/@/test,compound@/-time@/.ly}).
@lilypond[verbatim,ragged-right]
% create 2/4 + 5/8
tsMarkup =\markup {
- \number {
+ \override #'(baseline-skip . 2) \number {
\column { "2" "4" }
- \musicglyph #"scripts.stopped"
+ \lower #1 "+"
\bracket \column { "5" "8" }
}
}
\consists "Timing_translator"
\consists "Default_bar_line_engraver"
@}
-
+
@}
@end example
@noindent
As the example illustrates, @code{ly:make-moment n m} constructs a
-duration of n/m of a whole note. For example, @code{ly:make-moment 1 8} is an eighth
+duration of n/m of a whole note. For example, @code{ly:make-moment 1 8} is
+an eighth
note duration and @code{ly:make-moment 7 16} is the duration of
seven sixteenths notes.
accurately. Use @code{<g a>8 <e a>8} instead.
-@ignore
-
-This is covered in articulation; does it really need its
-own doc section? -gp
-@n ode Special fermatas
-@s ubsection Special fermatas
-
-@c index fermatas, special
-
-In contemporary music notation, special fermata symbols denote breaks
-of differing lengths. The following fermatas are supported
-
-@li lypond[quote,ragged-right]
-<<
- \oldaddlyrics {
- b'2
- ^\shortfermata
- _\shortfermata
- r
-
- b'
- ^\fermata
- _\fermata
- r
-
- b'
- ^\longfermata
- _\longfermata
- r
-
- b'
- ^\verylongfermata
- _\verylongfermata
- r
- }
- \new Lyrics \lyricmode {
- \override LyricText #'font-family = #'typewriter
- "shortfermata" "fermata" "longfermata" "verylongfermata"
- }
->>
-@end li lypond
-
-See @ref{Articulations} for general instructions how to apply scripts
-such as fermatas to notes.
-
-@end ignore
-
-
@node Special noteheads
@subsection Special noteheads
+@cindex note heads, special
+
Different noteheads are used by various instruments for various
meanings -- crosses are used for ``parlato'' with vocalists, stopped
notes on guitar; diamonds are used for harmonics on string instruments,
@end lilypond
+@node Selecting notation font size
+@subsection Selecting notation font size
+
+The easiest method of setting the font size of any context is by
+setting the @code{fontSize} property.
+
+@lilypond[quote,fragment,relative=1,verbatim]
+c8
+\set fontSize = #-4
+c f
+\set fontSize = #3
+g
+@end lilypond
+
+@noindent
+It does not change the size of variable symbols, such as beams or
+slurs.
+
+Internally, the @code{fontSize} context property will cause the
+@code{font-size} property to be set in all layout objects. The value
+of @code{font-size} is a number indicating the size relative to the
+standard size for the current staff height. Each step up is an
+increase of approximately 12% of the font size. Six steps is exactly a
+factor two. The Scheme function @code{magstep} converts a
+@code{font-size} number to a scaling factor.
+
+@lilypond[quote,fragment,relative=1,verbatim]
+c8
+\override NoteHead #'font-size = #-4
+c f
+\override NoteHead #'font-size = #3
+g
+@end lilypond
+
+Font size changes are achieved by scaling the design size that is
+closest to the desired size. The standard font size (for
+@code{font-size} equals 0), depends on the standard staff height. For
+a 20pt staff, a 10pt font is selected.
+
+The @code{font-size} property can only be set on layout objects that
+use fonts. These are the ones supporting the
+@internalsref{font-interface} layout interface.
+
+@refcommands
+
+The following commands set @code{fontSize} for the current voice:
+
+@funindex \tiny
+@code{\tiny},
+@funindex \small
+@code{\small},
+@funindex \normalsize
+@code{\normalsize}.
+
+
+
@node Educational use
@section Educational use
* Balloon help::
* Blank music sheet::
* Hidden notes::
-* Shape note heads ::
+* Shape note heads::
* Easy Notation note heads::
* Analysis brackets::
* Coloring objects::
+* Parentheses::
@end menu
@node Balloon help
The following example demonstrates its use.
@lilypond[quote,verbatim,fragment,ragged-right,relative=2]
-\new Voice {
- \applyOutput
- #(add-balloon-text 'NoteHead "heads, or tails?"
- '(1 . -3))
+\applyOutput #'Voice
+ #(add-balloon-text 'NoteHead "heads, or tails?"
+ '(1 . -3))
c8
-}
@end lilypond
@noindent
@node Blank music sheet
@subsection Blank music sheet
+@cindex Sheet music, empty
+@cindex Staves, blank sheet
+
A blank music sheet can be produced also by using invisible notes, and
removing @code{Bar_number_engraver}.
@cindex Invisible notes
@cindex Transparent notes
-@cindex @code{\hideNotes}
-@cindex @code{\unHideNotes}
+@funindex \hideNotes
+@funindex \unHideNotes
Hidden (or invisible or transparent) notes can be useful in preparing theory
or composition exercises.
g4 a
@end lilypond
-Hidden notes are also great for performing weird tricks. For example,
-slurs cannot be attached to rests or spacer rests, but you may wish
-to include that in your score -- string instruments use this notation
-when doing pizzicato to indicate that the note should ring for as long
-as possible.
-
-@lilypond[quote,ragged-right,verbatim,relative=0,fragment]
-\clef bass
-<< {
- c4^"pizz"( \hideNotes c)
- \unHideNotes c( \hideNotes c)
-} {
- s4 r s r
-} >>
-@end lilypond
+@node Shape note heads
+@subsection Shape note heads
-@node Shape note heads
-@subsection Shape note heads
+@cindex note heads, shape
In shape note head notation, the shape of the note head corresponds
to the harmonic function of a note in the scale. This notation was
Shapes are determined on the step in the scale, where the base of the
scale is determined by the @code{\key} command
-@findex \key
-@findex shapeNoteStyles
-@findex \aikenHeads
-@findex \sacredHarpHeads
+@funindex \key
+@funindex shapeNoteStyles
+@funindex \aikenHeads
+@funindex \sacredHarpHeads
Shape note heads are implemented through the @code{shapeNoteStyles}
property. Its value is a vector of symbols. The k-th element indicates
the style to use for the k-th step of the scale. Arbitrary
-combinations are possible, eg.,
-
+combinations are possible, e.g.
@lilypond[verbatim,relative=1,fragment]
\set shapeNoteStyles = ##(cross triangle fa #f mensural xcircle diamond)
@node Easy Notation note heads
@subsection Easy Notation note heads
+@cindex note heads, practice
+@cindex note heads, easy notation
@cindex easy notation
@cindex Hal Leonard
@refcommands
-@cindex @code{\setEasyHeads}
+@funindex \setEasyHeads
@code{\setEasyHeads}
@end lilypond
The full range of colors defined for X11 can be accessed by using the
-scheme function x11-color. The function takes one argument that can be a
+Scheme function x11-color. The function takes one argument that can be a
symbol
@example
defaults to black. It should be obvious from the final score that
something is wrong.
-This example, illustrates the use of x11-color. Notice that the stem
+This example illustrates the use of x11-color. Notice that the stem
color remains black after being set to (x11-color 'Boggle), which is
deliberate nonsense.
@refbugs
Not all x11 colors are distinguishable in a web browser. For web use
-normal colors are recommended.
+normal colors are recommended.
An x11 color is not necessarily exactly the same shade as a similarly
-named normal color.
-
-
-@node Automatic notation
-@section Automatic notation
-
-This section describes how to change the way that accidentals and
-beams are automatically displayed.
-
-FIXME: this might get moved into Changing Defaults. Please send
-opinions to lilypond-devel. Thanks! :)
-
-@menu
-* Automatic accidentals::
-* Setting automatic beam behavior::
-@end menu
-
-@node Automatic accidentals
-@subsection Automatic accidentals
-@cindex Automatic accidentals
-
-Common rules for typesetting accidentals have been placed in a
-function. This function is called as follows
-
-@cindex @code{set-accidental-style}
-@example
-#(set-accidental-style 'STYLE #('CONTEXT#))
-@end example
-
-The function can take two arguments: the name of the accidental style,
-and an optional argument that denotes the context that should be
-changed. If no context name is supplied, @code{Staff} is the default,
-but you may wish to apply the accidental style to a single @code{Voice}
-instead.
-
-The following accidental styles are supported
-@table @code
-@item default
-This is the default typesetting behavior. It corresponds
-to 18th century common practice: Accidentals are
-remembered to the end of the measure in which they occur and
-only on their own octave.
-
-@item voice
-The normal behavior is to remember the accidentals on
-Staff-level. This variable, however, typesets accidentals
-individually for each voice. Apart from that, the rule is similar to
-@code{default}.
-
-As a result, accidentals from one voice do not get canceled in other
-voices, which is often an unwanted result
-
-@lilypond[quote,ragged-right,relative=1,fragment,verbatim]
-\new Staff <<
- #(set-accidental-style 'voice)
- <<
- { es g } \\
- { c, e }
->> >>
-@end lilypond
-
-The @code{voice} option should be used if the voices
-are to be read solely by individual musicians. If the staff is to be
-used by one musician (e.g., a conductor) then
-@code{modern} or @code{modern-cautionary}
-should be used instead.
-
-@item modern
-@cindex @code{modern} style accidentals
-This rule corresponds to the common practice in the 20th century. This rule
-prints the same accidentals as @code{default}, but temporary
-accidentals also are canceled in other octaves. Furthermore,
-in the same octave, they also get canceled in the following
-measure
-
-@lilypond[quote,ragged-right,fragment,verbatim]
-#(set-accidental-style 'modern)
-cis' c'' cis'2 | c'' c'
-@end lilypond
+named normal color.
-@item @code{modern-cautionary}
-@cindex @code{modern-cautionary}
-This rule is similar to @code{modern}, but the ``extra'' accidentals
-(the ones not typeset by @code{default}) are typeset as cautionary
-accidentals. They are printed in reduced size or with parentheses
-@lilypond[quote,ragged-right,fragment,verbatim]
-#(set-accidental-style 'modern-cautionary)
-cis' c'' cis'2 | c'' c'
-@end lilypond
-
-@cindex @code{modern-voice}
-@item modern-voice
-This rule is used for multivoice accidentals to be read both by musicians
-playing one voice and musicians playing all voices. Accidentals are
-typeset for each voice, but they @emph{are} canceled across voices in
-the same @internalsref{Staff}.
-
-@cindex @code{modern-voice-cautionary}
-@item modern-voice-cautionary
-This rule is the same as @code{modern-voice}, but with the extra
-accidentals (the ones not typeset by @code{voice}) typeset
-as cautionaries. Even though all accidentals typeset by
-@code{default} @emph{are} typeset by this variable,
-some of them are typeset as cautionaries.
-
-@item piano
-@cindex @code{piano} accidentals
-This rule reflects 20th century practice for piano notation. Very similar to
-@code{modern} but accidentals also get canceled
-across the staves in the same @internalsref{GrandStaff} or
-@internalsref{PianoStaff}.
-
-@item piano-cautionary
-@cindex @code{#(set-accidental-style 'piano-cautionary)}
-Same as @code{#(set-accidental-style 'piano)} but with the extra
-accidentals typeset as cautionaries.
-
-@item no-reset
-@cindex @code{no-reset} accidental style
-This is the same as @code{default} but with accidentals lasting
-``forever'' and not only until the next measure
-@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
-#(set-accidental-style 'no-reset)
-c1 cis cis c
-@end lilypond
-
-@item forget
-This is sort of the opposite of @code{no-reset}: Accidentals
-are not remembered at all---and hence all accidentals are
-typeset relative to the key signature, regardless of what was
-before in the music
-
-@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
-#(set-accidental-style 'forget)
-\key d\major c4 c cis cis d d dis dis
-@end lilypond
-@end table
+Notes in a chord cannot be colored with @code{\override}; use
+@code{\tweak} instead. See @ref{Objects connected to the input}
+for details.
-@seealso
+@node Parentheses
+@subsection Parentheses
-Program reference: @internalsref{Accidental_engraver},
-@internalsref{Accidental}, and @internalsref{AccidentalPlacement}.
+@cindex ghost notes
+@cindex notes, ghost
+@cindex notes, parenthesized
+Objects may be parenthesized by prefixing @code{\parenthesize} to the music
+event,
-@refbugs
-
-Simultaneous notes are considered to be entered in sequential
-mode. This means that in a chord the accidentals are typeset as if the
-notes in the chord happened once at a time - in the order in which
-they appear in the input file.
-
-This is a problem when accidentals in a chord depend on each other,
-which does not happen for the default accidental style. The problem
-can be solved by manually inserting @code{!} and @code{?} for the
-problematic notes.
-
-
-@node Setting automatic beam behavior
-@subsection Setting automatic beam behavior
-
-@cindex @code{autoBeamSettings}
-@cindex @code{(end * * * *)}
-@cindex @code{(begin * * * *)}
-@cindex automatic beams, tuning
-@cindex tuning automatic beaming
-
-@c [TODO: use \applyContext]
-
-In normal time signatures, automatic beams can start on any note but can
-only end in a few positions within the measure: beams can end on a beat,
-or at durations specified by the properties in
-@code{autoBeamSettings}. The properties in @code{autoBeamSettings}
-consist of a list of rules for where beams can begin and end. The
-default @code{autoBeamSettings} rules are defined in
-@file{scm/@/auto@/-beam@/.scm}.
-
-In order to add a rule to the list, use
-@example
-#(override-auto-beam-setting '(be p q n m) a b [context])
-@end example
-
-@itemize @bullet
-
-@item @code{be} is either "begin" or "end".
-
-@item @code{p/q} is the duration of the note for which you want
-to add a rule. A beam is considered to have the duration of its
-shortest note. Set @code{p} and @code{q} to @code{'*'} to
-have this apply to any beam.
-
-@item @code{n/m} is the time signature to which
-this rule should apply. Set @code{n} and @code{m} to @code{'*'}
-to have this apply in any time signature.
-
-@item @code{a/b} is the position in the bar at which the beam should begin/end.
-
-@item @code{context} is optional, and it specifies the context at which
-the change should be made. The default is @code{'Voice}.
-@code{#(score-override-auto-beam-setting '(A B C D) E F)} is equivalent to
-@code{#(override-auto-beam-setting '(A B C D) E F 'Score)}.
-
-@end itemize
-
-For example, if automatic beams should always end on the first quarter
-node, use
-
-@example
-#(override-auto-beam-setting '(end * * * *) 1 4)
-@end example
-
-You can force the beam settings to only take effect on beams whose shortest
-note is a certain duration
-
-@lilypond[quote,fragment,ragged-right,verbatim,relative=2]
-\time 2/4
-#(override-auto-beam-setting '(end 1 16 * *) 1 16)
-a16 a a a a a a a |
-a32 a a a a16 a a a a a |
-#(override-auto-beam-setting '(end 1 32 * *) 1 16)
-a32 a a a a16 a a a a a |
-@end lilypond
-
-You can force the beam settings to only take effect in certain time
-signatures
-
-@lilypond[quote,fragment,ragged-right,verbatim,relative=2]
-\time 5/8
-#(override-auto-beam-setting '(end * * 5 8) 2 8)
-c8 c d d d
-\time 4/4
-e8 e f f e e d d
-\time 5/8
-c8 c d d d
-@end lilypond
-
-You can also remove a previously set beam-ending rule by using
-
-@example
-#(revert-auto-beam-setting '(be p q n m) a b [context])
-@end example
-
-@noindent
-be, p, q, n, m, a, b and context are the same as above. Note that the
-default rules are specified in @file{scm/@/auto@/-beam@/.scm},
-so you can revert rules that you did not explicitly create.
-
-@lilypond[quote,fragment,ragged-right,verbatim,relative=2]
-\time 4/4
-a16 a a a a a a a a a a a a a a a
-#(revert-auto-beam-setting '(end 1 16 4 4) 1 4)
-a16 a a a a a a a a a a a a a a a
-@end lilypond
-
-The rule in a revert-auto-beam-setting statement must exactly match the
-original rule. That is, no wildcard expansion is taken into account.
-
-@lilypond[quote,fragment,ragged-right,verbatim,relative=2]
-\time 1/4
-#(override-auto-beam-setting '(end 1 16 1 4) 1 8)
-a16 a a a
-#(revert-auto-beam-setting '(end 1 16 * *) 1 8) % this won't revert it!
-a a a a
-#(revert-auto-beam-setting '(end 1 16 1 4) 1 8) % this will
-a a a a
+@lilypond[relative=2,fragment,verbatim,ragged-right]
+<
+ c
+ \parenthesize d
+ g
+>4-\parenthesize -.
@end lilypond
+This only functions inside chords, even for single notes
-
-@c TODO: old material -- not covered by above stuff, I think.
-If automatic beams should end on every quarter in 5/4 time, specify
-all endings
-@example
-#(override-auto-beam-setting '(end * * * *) 1 4 'Staff)
-#(override-auto-beam-setting '(end * * * *) 1 2 'Staff)
-#(override-auto-beam-setting '(end * * * *) 3 4 'Staff)
-#(override-auto-beam-setting '(end * * * *) 5 4 'Staff)
-@dots{}
-@end example
-
-The same syntax can be used to specify beam starting points. In this
-example, automatic beams can only end on a dotted quarter note
@example
-#(override-auto-beam-setting '(end * * * *) 3 8)
-#(override-auto-beam-setting '(end * * * *) 1 2)
-#(override-auto-beam-setting '(end * * * *) 7 8)
+< \parenthesize NOTE>
@end example
-In 4/4 time signature, this means that automatic beams could end only on
-3/8 and on the fourth beat of the measure (after 3/4, that is 2 times
-3/8, has passed within the measure).
-
-@cindex automatic beam generation
-@cindex autobeam
-@cindex @code{autoBeaming}
-@cindex lyrics
-
-If beams are used to indicate melismata in songs, then automatic
-beaming should be switched off with @code{\autoBeamOff}.
-
-
-@refcommands
-
-@cindex @code{\autoBeamOff}
-@code{\autoBeamOff},
-@cindex @code{\autoBeamOn}
-@code{\autoBeamOn}.
-
-
-@refbugs
-
-If a score ends while an automatic beam has not been ended and is
-still accepting notes, this last beam will not be typeset at all. The
-same holds polyphonic voices, entered with @code{<< @dots{} \\ @dots{}
->>}. If a polyphonic voice ends while an automatic beam is still
-accepting notes, it is not typeset.
-