Running @command{lilypond-book} and @command{latex} creates a lot of
temporary files, which would clutter up the working directory. To
-remedy this, use the @code{--output=@var{dir}} option. It will create
+remedy this, use the @option{--output=@var{dir}} option. It will create
the files in a separate subdirectory @file{dir}.
Finally the result of the @LaTeX{} example shown above.@footnote{This
@emph{The Not So Short Introduction to @LaTeX{}}} for an overview on how
to use @LaTeX{}.
-Music is entered using
+@code{lilypond-book} provides the following commands and environments to include
+music in @LaTeX{} files:
+
+@itemize
+
+@item
+the @code{\lilypond@{...@}} command, where you can directly enter short
+lilypond code
+
+@item
+the @code{\begin@{lilypond@}...\end@{lilypond@}} environment, where you
+can directly enter longer lilypond code
+
+@item
+the @code{\lilypondfile@{...@}} command to insert a lilypond file
+
+@item
+the @code{\musicxmlfile@{...@}} command to insert a MusicXML file, which
+will be processed by @code{musicxml2ly} and @code{lilypond}.
+
+@end itemize
+
+In the input file, music is specified with any of the following commands:
@example
\begin@{lilypond@}[options,go,here]
YOUR LILYPOND CODE
\end@{lilypond@}
-@end example
-@noindent
-or
+\lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
-@example
\lilypondfile[options,go,here]@{@var{filename}@}
+
+\musicxmlfile[options,go,here]@{@var{filename}@}
@end example
-@noindent
-or
-@example
-\lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
-@end example
+@noindent
Additionally, @code{\lilypondversion} displays the current version
of lilypond.
example of a Texinfo document is this manual. The HTML, PDF, and Info
versions of the manual are made from the Texinfo document.
-In the input file, music is specified with
+@code{lilypond-book} provides the following commands and environments to include
+music into Texinfo files:
+
+@itemize
+
+@item
+the @code{@@lilypond@{...@}} command, where you can directly enter short
+lilypond code
+
+@item
+the @code{@@lilypond...@@end lilypond} environment, where you can directly
+enter longer lilypond code
+
+@item
+the @code{@@lilypondfile@{...@}} command to insert a lilypond file
+
+@item
+the @code{@@musicxmlfile@{...@}} command to insert a MusicXML file, which
+will be processed by @code{musicxml2ly} and @code{lilypond}.
+
+@end itemize
+
+In the input file, music is specified with any of the following commands
@example
@@lilypond[options,go,here]
YOUR LILYPOND CODE
@@end lilypond
-@end example
-
-@noindent
-or
-@example
@@lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
-@end example
-@noindent
-or
-
-@example
@@lilypondfile[options,go,here]@{@var{filename}@}
+
+@@musicxmlfile[options,go,here]@{@var{filename}@}
@end example
Additionally, @code{@@lilypondversion} displays the current version
@node HTML
@subsection HTML
-Music is entered using
+@code{lilypond-book} provides the following commands and environments to include
+music in HTML files:
+
+@itemize
+
+@item
+the @code{<lilypond .... />} command, where you can directly enter short lilypond code
+
+@item
+the @code{<lilyond>...</lilypond>} environment, where you can directly enter longer
+lilypond code
+
+@item
+the @code{<lilypondfile>...</lilypondfile>} command to insert a lilypond file
+
+@item
+the @code{<musicxmlfile>...</musicxmlfile>} command to insert a MusicXML file, which
+will be processed by @code{musicxml2ly} and @code{lilypond}.
+
+@end itemize
+
+In the input file, music is specified with any of the following commands:
+\begin@{lilypond@}[options,go,here]
+ YOUR LILYPOND CODE
+\end@{lilypond@}
+
+\lilypond[options,go,here]@{ YOUR LILYPOND CODE @}
+
+\lilypondfile[options,go,here]@{@var{filename}@}
+
+\musicxmlfile[options,go,here]@{@var{filename}@}
+@example
+<lilypond options go here>
+ YOUR LILYPOND CODE
+</lilypond>
+
+<lilypond options go here: YOUR LILYPOND CODE />
+
+<lilypondfile options go here>@var{filename}</lilypondfile>
+
+<musicxmlfile options go here>@var{filename}</musicxmlfile>
+@end example
+
+For example, you can write
@example
<lilypond fragment relative=2>
\key c \minor c4 es g2
<lilypondfile @var{option1} @var{option2} ...>@var{filename}</lilypondfile>
@end example
+@code{<musicxmlfile>} uses the same syntax as @code{<lilypondfile>}, but simply
+references a MusicXML file rather than a LilyPond file.
+
For a list of options to use with the @code{lilypond} or
@code{lilypondfile} tags, see @ref{Music fragment options}.
@item ragged-right
Produce ragged-right lines with natural spacing, i.e.,
-@code{ragged-right = ##t} is added to the LilyPond snippet. This is the
-default for the @code{\lilypond@{@}} command if no @code{line-width}
-option is present. It is also the default for the @code{lilypond}
-environment if the @code{fragment} option is set, and no line width is
-explicitly specified.
+@code{ragged-right = ##t} is added to the LilyPond snippet. Single-line
+snippets will always be typeset by default as ragged-right, unless
+@code{noragged-right} is explicitly given.
@item noragged-right
For single-line snippets, allow the staff length to be stretched to
called @file{foo.ly}, it creates a file @file{foo.texidoc} if there
is a @code{texidoc} field in the @code{\header}. The @code{texidoc}
option makes @command{lilypond-book} include such files, adding its
-contents as a documentation block right before the music snippet.
+contents as a documentation block right before the music snippet (but
+outside the @code{example} environment generated by a @code{quote}
+option).
Assuming the file @file{foo.ly} contains
@file{foo.texidoc@var{LANG}} will be included instead of
@file{foo.texidoc}.
-@item lilyquote
-(Only for Texinfo output.) This option is similar to quote, but only
-the music snippet (and the optional verbatim block implied by
-@code{verbatim} option) is put into a quotation block. This option is
-useful if you want to @code{quote} the music snippet but not the
-@code{texidoc} documentation block.
-
@item doctitle
(Only for Texinfo output.) This option works similarly to
@code{texidoc} option: if @command{lilypond} is called with the
Running @command{dvips} may produce some warnings about fonts; these
are harmless and may be ignored. If you are running @command{latex} in
-twocolumn mode, remember to add @code{-t landscape} to the
+twocolumn mode, remember to add @option{-t landscape} to the
@command{dvips} options.
@subsubheading Texinfo
for already compiled snippets in the include path, and does not write
them back to the output directory, so in some cases it is necessary to
invoke further processing commands such as @command{makeinfo} or
-@command{latex} with the same @code{-I @var{dir}} options.
+@command{latex} with the same @option{-I @var{dir}} options.
@item -o @var{dir}
@itemx --output=@var{dir}
LilyPond Info documentation without images.
@itemx --lily-output-dir=@var{dir}
-Write lily-XXX files to directory @var{dir}, link into @code{--output}
+Write lily-XXX files to directory @var{dir}, link into @option{--output}
directory. Use this option to save building time for documents in
different directories which share a lot of identical snippets.
@item -P @var{command}
@itemx --process=@var{command}
Process LilyPond snippets using @var{command}. The default command is
-@code{lilypond}. @code{lilypond-book} will not @code{--filter} and
-@code{--process} at the same time.
+@code{lilypond}. @code{lilypond-book} will not @option{--filter} and
+@option{--process} at the same time.
@item --pdf
Create PDF files for use with PDF@LaTeX{}.
@itemx --use-source-file-names
Write snippet output files with the same base name as their source file.
This option works only for snippets included with @code{lilypondfile}
-and only if directories implied by @code{--output-dir} and
-@code{--lily-output-dir} options are different.
+and only if directories implied by @option{--output-dir} and
+@option{--lily-output-dir} options are different.
@item -V
@itemx --verbose
If you use the same filename extension for the input file than the
extension @command{lilypond-book} uses for the output file, and if the
input file is in the same directory as @command{lilypond-book} working
-directory, you must use @code{--output} option to make
+directory, you must use @option{--output} option to make
@command{lilypond-book} running, otherwise it will exit with an error
message like @qq{Output would overwrite input file}.