@node Top, , , (dir)
@top
+@contents
+
@chapter INSTALL - compiling and installing GNU LilyPond
-@section Obtaining
-You can get the latest version of LilyPond at
-@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/,
-ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/}.
+This document describes how to build LilyPond on Unix platforms. It is
+also known to run and compile on Windows NT/95/98 as well. More
+information on this topic can be found at the
+@uref{ftp://ftp.lilypond.org/pub/LilyPond/gnu-windows/, LilyPond on Windows
+page}.
-@emph{If you upgrade by patching do remember to rerun autoconf after
-applying the patch}.
+@html
+<a name="download-source">
+@end html
-If you do not want to download the entire archive for each version, the
-safest method for upgrading is to use @file{xdelta}, see
-@uref{ftp://ftp.xcf.berkeley.edu/pub/xdelta/}.
+@section Downloading
-The following command produces @file{lilypond-1.1.55.tar.gz} from
-@file{lilypond-1.1.54} identical (up to compression dates) to the .55 on
-the FTP site.
-@example
- xdelta patch lilypond-1.1.54-1.1.55.xd lilypond-1.1.54.tar.gz
-@end example
+Even numbered versions are `stable'. The webpages for the stable version
+(1.2) reside @uref{http://www.gnu.org/software/lilypond, on the GNU
+servers}. Big enhancements go into the latest odd numbered version
+(1.3), whose webpages are on @uref{http://www.lilypond.org/,the lilypond
+site}.
-@section Prerequisites
+@subsection source code
-For compilation you need:
+If you want to compile LilyPond from source, download here:
@itemize @bullet
-@item A GNU system: GNU LilyPond is known to run on these GNU systems: Linux
- (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix and
- Solaris.
+@item Download development releases from
+@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/development/} by FTP and
+@uref{http://ftp.cs.uu.nl/pub/GNU/LilyPond/development/}, by HTTP.
+@item @uref{ftp://sca.uwaterloo.ca/pub/} by FTP (Canadian mirror)
+@item at @code{lilypond.org}
+@uref{ftp://ftp.lilypond.org/pub/LilyPond/} by FTP and
+@uref{http://www.lilypond.org/ftp/} by HTTP.
+@end itemize
+
+@html
+<a name="download-binaries">
+@end html
+
-@item Lots of disk space: LilyPond takes between 30 and 100 mb to
-compile if you use debugging information. If you are short on
-disk-space run configure with @code{--disable-debugging}.
+@subsection Binaries
+
+Binaries are available, but are not updated for every version released.
+@itemize @bullet
+@item @uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/RedHat/RPMS/, RedHat i386}
+@item @uref{ftp://ftp.lilypond.org/pub/LilyPond/binaries/linuxppc, LinuxPPC}
@item
-Although we recommend to use Unix, LilyPond is known to run on Windows
-NT/95/98 as well. See Section Windows NT/95,es.
+@uref{ftp://ftp.debian.org/debian/pool/main/l/lilypond,
+Debian GNU/Linux Stable}
+@item
+@uref{ftp://ftp.debian.org/debian/pool/main/l/lilypond1.3,
+Debian GNU/Linux Unstable}
+@item @uref{http://home.austin.rr.com/jbr/jeff/lilypond/, Windows Stable}
+@c @item @uref{ftp://ftp.lilypond.org/pub/lilypond/gnu-windows, Windows
+@c Testing}
+@uref{http://www.lilypond.org/gnu-windows, Windows Testing}
+
+@end itemize
+
+@subsection Upgrading
-@item A reasonable C++ compiler: EGCS 1.1, GCC 2.95.2 or newer. Check out @uref{ftp://ftp.gnu.org/gnu/gcc/}.
+There are two options for upgrading sources.
+
+@itemize
+@item if you have an unpacked source tree of a previous version, you
+may the patches.
+
+@emph{If you upgrade by patching do remember to rerun autoconf after
+applying the patch}.
+
+@item if you have the @code{.tar.gz} file of a previous release, you can
+use
+@uref{ftp://ftp.xcf.berkeley.edu/pub/xdelta/, xdelta}.
+ This is much safer than using patches, and is the recommended way.
+
+The following command produces @file{lilypond-1.3.122.tar.gz} from
+@file{lilypond-1.3.121} identical (up to compression dates) to the .122
+on the FTP site.
+@example
+ xdelta patch lilypond-1.3.121-1.3.122.xd lilypond-1.3.121.tar.gz
+@end example
+@end itemize
+
+@section Requirements
+
+@subsection Compilation
+
+You need the following packages to compile Lilypond.
+
+@itemize
+@item A reasonably new C++ compiler: EGCS 1.1, GCC 2.95.2 or
+newer. Check out @uref{ftp://ftp.gnu.org/gnu/gcc/, the gcc site}.
@item Python 1.5,
-Check out @uref{ftp://ftp.python.org} or
-@uref{ftp://ftp.cwi.nl/pub/python}.
+Check out @uref{http://www.python.org, the python website}.
@item GUILE 1.3.4 or newer, check out
-@uref{http://www.gnu.org/software/guile/guile.html,http://www.gnu.org/software/guile/guile.html}.
+@uref{http://www.gnu.org/software/guile/guile.html,the GUILE webpage}.
Version 1.4 is recommended for better performance.
@item GNU Make.
Check out
-@uref{ftp://ftp.gnu.org/gnu/make/,ftp://ftp.gnu.org/gnu/make/}.
+@uref{ftp://ftp.gnu.org/gnu/make/, the GNU
+make FTP directory}.
@item Flex (version 2.5.4a or newer).
-Check out @uref{ftp://ftp.gnu.org/pub/gnu/non-gnu/flex/,ftp://ftp.gnu.org/pub/gnu/non-gnu/flex/}.
+Check out @uref{http://www.gnu.org/software/flex/,the Flex webpage}.
@item Bison (version 1.25 or newer).
-Check out @uref{ftp://ftp.gnu.org/gnu/bison/,ftp://ftp.gnu.org/gnu/bison/}.
+Check out @uref{http://www.gnu.org/software/bison/,the bison webpage}
+
+@item @TeX{}.
-@item TeX. If you want LilyPond to use kpathsea support (recommended),
-make sure you have tetex 1.0 or newer (1.0.6 is known to work). You may
+@TeX{} is used as an output backend.
+
+Also, @TeX{}'s libkpathsea is used to find the fonts (.mf, .afm, .tfm).
+Make sure you have tetex 1.0 or newer (1.0.6 is known to work). You may
need to install a tetex-devel or tetex-dev package too.
-@item Texinfo (version 4.0 or newer).
-Check out @uref{ftp://ftp.gnu.org/gnu/texinfo/,ftp://ftp.gnu.org/gnu/texinfo/}.
-Most documentation is in texinfo.
+@item Texinfo (version 4.0 or newer).
+The documentation of lily is written in texinfo. Check out
+@uref{ftp://ftp.gnu.org/gnu/texinfo/,the texinfo FTP directory}.
@item The geometry package for LaTeX is needed to use ly2dvi.
-Available at
-@uref{ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry,ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry}
-or at mirror site @uref{ftp://ftp.dante.de,ftp://ftp.dante.de}
+It is available at
+@uref{ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry,the
+FTP directory for @code{geometry}}. This package is normally included
+with the @TeX{} distribution.
@item MetaPost, needed for generating PostScript fonts. Please
-note that tetex-0.4pl8 (included with Redhat 5.x) does not include
+note that tetex-0.4pl8 (included with Red Hat 5.x) does not include
@file{mfplain.mp}, which is needed for producing the scalable font
files.
-If you do not want to use PostScript output, edit @file{mf/GNUmakefile},
-removing the line saying @code{PFA_FILES=}
+If you don't have MetaPost and don't want to use PostScript output, then
+edit @file{mf/GNUmakefile}, removing the line saying @code{PFA_FILES=}.
@item kpathsea, a library for searching (TeX) files. @code{kpathsea} is
-usually included with your installation of TeX.
+usually included with your installation of TeX. You may need to install
+a tetex-devel or tetex-dev package too.
+
+In the very unlikely case that kpathsea is not available for your
+platform (ie, you're not running GNU/Linux, Windows, or any recent
+UNIX), you can compile LilyPond without kpathsea support. In that case,
+you'll probably have to indicate where @TeX{}'s tfm files live. Invoke
+configure something like:
+
+@example
+./configure --without-kpathsea --enable-tfm-path=/usr/share/texmf/fonts/tfm/public/cm/:/usr/share/texmf/fonts/tfm/ams/symbols
+@end example
@end itemize
-@section Running
+@subsection Running requirements
GNU LilyPond does use a lot of resources. For operation you need the
following software
@itemize @bullet
@item TeX.
-@item A PostScript printer and/or viewer (such as Ghostscript) is strongly
- recommended. Xdvi will show all embedded PostScript too if you have
- Ghostscript installed.
-@item GUILE 1.3.4, or newer. Check out @uref{http://www.gnu.org/programs/guile.html,http://www.gnu.org/software/guile/}
+@item Xdvi and ghostscript
+@item GUILE 1.3.4, or newer. Check out
+@uref{http://www.gnu.org/software/guile.html,the GUILE webpage}
@end itemize
For running LilyPond successfully you have to help TeX and MetaFont find
various files. The recommended way of doing so is adjusting the
environment variables in the start-up scripts of your shell. Appropriate
-Csh and sh scripts are left in @file{buildscripts/out/lilypond-profile}
-and @file{buildscripts/out/lilypond-login} after compilation.
-
-The empty path component represents TeX and MetaFont's default search
-paths. Scripts with the proper paths for the bourne and C-shell
-respectively are generated in @file{buildscripts/out/lilypond-profile}
-and @file{buildscripts/out/lilypond-login} during compilation.
+Csh and bourne sh scripts are left in
+@file{buildscripts/out/lilypond-profile} and
+@file{buildscripts/out/lilypond-login} after compilation.
LilyPond is a big and slow program. A fast CPU and plenty of RAM is
recommended for comfortable use.
-@section Website
+@subsection Website requirements
-The website is the most convenient form to use for reading the
-documentation on-line documentation. It is made by entering @example
+The documentation comes in the form of a website. You can view this
+website on the internet, but you can also build it locally. This process
+requires a successful compile of lilypond. The website is built
+by issuing
+@example
- make htmldoc
+ make web-doc
@end example
-This does require a functioning LilyPond. The binary doesn't have to
-be installed.
-If you want to auto-generate Lily's website, you'll need some additional
-conversion tools.
+Building the website requires some additional tools:
@itemize @bullet
-@item xpmtoppm (from the netpbm package: the Portable Bitmap Utilities) (For RedHat Linux
- users: it is included within the package libgr-progs).
- the original is at
-@uref{ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz,ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz}
+@item xpmtoppm (from the netpbm package: the Portable Bitmap Utilities).
+ The original is at
+@uref{ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz,the
+netpbm FTP site}
-@item pnmtopng (also in libgr-progs for RedHat). The original is
+@item pnmtopng. The original is
at
-@uref{ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz,ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz}.i
-
-The version of @file{pnmtopng} that is distributed with RedHat 5.1 and
-5.2 contains a bug: pnmtopng is dynamically linked to the wrong
-version of libpng.
+@uref{ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz,in
+the pnmtopng FTP site}.
@item @uref{http://www.lri.fr/~filliatr/ftp/bibtex2html/, Bibtex2html}, or
@uref{http://www.uni-koblenz.de/ag-ki/ftp/bib2html/, Bib2html}.
The website will build without bib converter utility, but you will not
see our hypertextified bibliography.
+@item texinfo (a development release)
+The documentation will build with texinfo-4.0, but if you want split
+html pages, you're best off using the lates pretest version from
+@uref{ftp://texinfo.org/texinfo/pretests/texinfo-4.0b.tar.gz,
+texinfo-4.0b} or
+@uref{ftp://alpha.gnu.org/gnu/texinfo-4.0b.tar.gz,texinfo-4.0b}
@end itemize
-@section Configuring and compiling
+@section Building LilyPond
-to install GNU LilyPond, simply type:
+to install GNU LilyPond, type:
@example
gunzip -c lilypond-x.y.z | tar xf -
cd lilypond-x.y.z
- ./configure # fill in your standard prefix with --prefix
+ ./configure # run with --help to see appropriate options
make
make install
+ sh buildscripts/clean-fonts.sh
@end example
-This will install a number of files, something close to:
-
-@example
- /usr/local/man/man1/midi2ly.1
- /usr/local/man/man1/abc2ly.1
- /usr/local/man/man1/etf2ly.1
- /usr/local/man/man1/convert-ly.1
- /usr/local/man/man1/lilypond-book.1
- /usr/local/man/man1/lilypond.1
- /usr/local/bin/lilypond
- /usr/local/bin/midi2ly
- /usr/local/bin/convert-ly
- /usr/local/bin/lilypond-book
- /usr/local/bin/abc2ly
- /usr/local/bin/pmx2ly
- /usr/local/bin/musedata2ly
- /usr/local/bin/etf2ly
- /usr/local/share/lilypond/*
- /usr/local/share/locale/@{....@}/LC_MESSAGES/lilypond.mo
-@end example
+If you are doing an upgrade, you should remove all @file{feta}
+@code{.pk} and @file{.tfm} files. A script has been provided to do the
+work for you, see @file{buildscripts/clean-fonts.sh}.
-The above assumes that you are root and have the GNU development
-tools, and your make is GNU make. If this is not the case, you can
-adjust your environment variables to your taste:
-
+If you are not root, you should choose a @code{--prefix} argument that
+points into your home directory, eg.
@example
- export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
- ./configure
+ ./configure --prefix=$HOME/usr
@end example
-@code{CPPFLAGS} are the preprocessor flags.
+In this case, you have to insert the contents of
+@code{buildscripts/out/lilypond-login} or
+@code{buildscripts/out/lilypond-profile} into your start up scripts by
+hand.
+
+
-The configure script is Cygnus configure, and it will accept
-@code{--help}. If you are not root, you will probably have to make it
-with a different @code{--prefix} option. Our favourite location is
+@subsection Configuring for multiple platforms
+If you want to build multiple versions of LilyPond with different
+configuration settings, you can use the @code{--enable-config=CONF}
+option of configure. You should use @samp{make conf=CONF} to generate
+the output in @file{out-CONF}. Example: suppose I want to build with
+and without profiling. Then I'd use the following for the normal build,
@example
- ./configure --prefix=$HOME/usr
-
+ ./configure --prefix=~ --enable-checking
+ make
+ make install
@end example
-In this case, you will have to set up MFINPUTS, and TEXINPUTS accordingly.
-
-Since GNU LilyPond currently is beta, you are advised to also use
+and for the profiling version, I specify a different configuration.
@example
- --enable-debugging
- --enable-checking
-
+ ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking
+ make conf=prof
+ make conf=prof install
+
@end example
-Options to configure include:
-@table @samp
-@item @code{--enable-printing}
- Enable debugging print routines (lilypond @code{-D} option)
-@item @code{--enable-optimise}
- Set maximum optimisation: compile with @code{-O2}. This can be
-unreliable on some compiler/platform combinations (eg, DEC Alpha and PPC)
-@item @code{--enable-profiling}
- Compile with support for profiling.
-@item @code{--enable-config}
- Output to a different configuration file. Needed for multi-platform
- builds
-@end table
-All options are documented in the @file{configure} help
-The option @code{--enable-optimise} is recommended for Real Life usage.
-If you do
-@example
+@section Emacs mode
- make all
-
-@end example
+An emacs mode for LilyPond is included with the source archive as
+@file{lilypond-mode.el} and @file{lilypond-font-lock.el}. If you have
+an RPM, it is in @file{/usr/share/doc/lilypond-X/}. You have to install
+it yourself.
-everything will be compiled, but nothing will be installed. The
-resulting binaries can be found in the subdirectories @file{out/} (which
-contain all files generated during compilation).
-
-@section Configuring for multiple platforms
+Add this to your @file{~/.emacs} or @file{~/.emacs.el}:
+@example
+ (load-library "lilypond-mode.el")
+ (setq auto-mode-alist
+ (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
+ (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
+@end example
-If you want to compile LilyPond with different configuration settings,
-then, you can use the @code{--enable-config} option. Example: suppose I
-want to build with and without profiling. Then I'd use the
-following for the normal build,
+If you have the latest LilyPond-1.3.x Debian package, LilyPond-mode is
+automatically loaded, so you need not modify your @code{~/.emacs} file.
-@example
+@section Compiling for distributions
- ./configure --prefix=~ --disable-optimise --enable-checking
- make
- make install
-
-@end example
+@subsection Red Hat Linux
-and for the profiling version, I specify a different configuration.
+Red Hat 7.0 i386 RPMS are available from
+@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/}.
+You can also compile them yourself. A spec file is in
+@file{make/out/redhat.spec}. This file is distributed along with the
+sources. You can make the rpm by issuing
@example
- ./configure --prefix=~ --enable-profiling --enable-config=prof --enable-optimise --disable-checking
- make config=prof
- make config=prof install
+ rpm -tb lilypond-x.y.z.tar.gz
+ rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
@end example
+For running on a Red Hat system you need these packages: guile, tetex,
+tetex-latex, tetex-dvips, libstdc++, python, ghostscript.
-@section Installing
+For compilation on a Red Hat system you need these packages, in addition
+to the those needed for running: glibc-devel, gcc-c++, libstdc++-devel,
+guile-devel, flex, bison, texinfo, tetex-devel, groff,
+libgr-progs.
-if you have done a successful @code{make}, then a simple
+@subsection SuSE
-@example
+You can also compile them yourself. A spec file is in
+@file{make/out/suse.spec}. This file is distributed along with the
+sources.
- make install
-
-@end example
+You must have the following packages: guile tcsh tetex te_latex te_kpath
+te_mpost libpng python gpp libgpp gettext autoconf netpbm libnetpb
+gs_serv gs_lib gs_fonts guile
-should do the trick.
+@subsection Mandrake
-If you are doing an upgrade, please remember to remove obsolete
-@file{.pk} and @file{.tfm} files of the fonts. A script has been
-provided to do the work for you, see @file{bin/clean-fonts.sh}.
+[TODO]
+@subsection Debian GNU/Linux
-@section Redhat linux
+A Debian package is also available. You may install it easily by using
+apt-get as root:
-RedHat Linux users can compile an RPM. A spec file is in
-@file{make/out/lilypond.spec}, it is distributed along with the
-sources.
+@example
+ apt-get install lilypond1.3
+@end example
-You can make the rpm by issuing
-@example
- rpm -tb lilypond-x.y.z.tar.gz
- rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+Debian's tex installation is a bit short on memory, you may want to
+increase it like this:
+@example
+--- /etc/texmf/texmf.cnf.dpkg Sun Jan 28 14:12:14 2001
++++ /etc/texmf/texmf.cnf Fri Apr 27 11:09:35 2001
+@@ -384,8 +384,8 @@
+ main_memory.context = 1500000
+ main_memory.mpost = 1000000
+ main_memory = 263000 % words of inimemory available; also applies to inimf&mp
+-extra_mem_top = 0 % extra high memory for chars, tokens, etc.
+-extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
++extra_mem_top = 100000 % extra high memory for chars, tokens, etc.
++extra_mem_bot = 100000 % extra low memory for boxes, glue, breakpoints, etc.
+
+ obj_tab_size.context = 256000
-@end example
-Precompiled RedHat-7.0 i386 RPMS are available from
-@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/RedHat/}.
+@end example
+
+Alternatively, visit
-For compilation on a RedHat system you need these packages,
-in addition to the those needed for running:
@itemize @bullet
-@item glibc-devel
-@item libstdc++-devel
-@item guile-devel
-@item flex
-@item bison
-@item texinfo
-@item tetex-devel
+@item @uref{http://packages.debian.org/lilypond,http://packages.debian.org/lilypond}
+@item @uref{http://ftp.debian.org/debian/pool/main/l/lilypond1.3/,http://ftp.debian.org/debian/pool/main/l/lilypond1.3/}
+for latest package uploaded to Debian unstable;
+@item @uref{http://people.debian.org/~foka/lilypond/,http://people.debian.org/~foka/lilypond/}
+for latest semi-unofficial build of LilyPond 1.3.121 for Debian 2.2r2 (potato) users.
+The official stable Debian 2.2r2 is stuck with the old LilyPond-1.3.24.
@end itemize
-@section Debian GNU/linux
-
-A Debian package is also available; see
-@uref{http://packages.debian.org/lilypond,http://packages.debian.org/lilypond}
-or contact Anthony Fok @email{foka@@debian.org} for more information.
+You may contact Anthony Fok @email{foka@@debian.org} for more information.
The build scripts are in the subdirectory @file{debian/}; you can
-make the .deb by doing
+make the .deb by doing, for example:
-@example
-
- tar xzf lilypond-x.y.z.tar.gz
- cd lilypond-x.y.z
- dpkg-buildpackage
- dpkg -i ../lilypond_x.y.z*deb
-
-@end example
+@example
+ $ su - root
+ # dpkg --purge lilypond lilypond1.3
+ # exit
+ $ tar xzf lilypond-1.3.122.tar.gz
+ $ cd lilypond-1.3.122
+ $ dch -p -v 1.3.122-0.local.1 "Local build."
+ $ debuild
+ $ su - root
+ # dpkg -i ../lilypond1.3_1.3.122*.deb
+ # exit
+ $
+@end example
For compilation on a Debian GNU/Linux system you need these packages,
in addition to the those needed for running:
+
@itemize @bullet
-@item libc6-dev
-@item libstdc++<your-libstdc++-version-here>-dev
+@item g++, cpp, libc6-dev, libstdc++<your-libstdc++-version-here>-dev
@item libguile<your-libguile-version-here>-dev
-@item flex
-@item bison
+@item make, m4, flex, bison
@item gettext
-@item texinfo
-@item tetex-dev
-@item debhelper
+@item groff, texinfo, bibtex2html (not in 2.2r2)
+@item tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
+@item dpkg-dev, debhelper, fakeroot
+@item gs, netpbm, pnmtopng
@end itemize
+Most of these are listed on the Build-Depends line in the
+debian/control file. To ensure the creation of the lilypond deb is
+trouble-free, we recommend that you first install the following packages
+before starting dpkg-buildpackage by running apt-get as root.
-@section Windows NT/95
-
-Separate instructions on building for W32 are available; See the files
-in @file{Documentation/ntweb/}, included with the sources.
+For Debian 2.2 (or 2.2r2, 2.2r3):
-@section Problems
+@example
+ apt-get install task-debian-devel task-c++-dev \
+ python-base libguile6-dev tetex-bin tetex-dev \
+ tetex-extra flex bison texinfo groff gs \
+ netpbm pnmtopng m4 gettext
+@end example
-For help and questions use @email{help-gnu-music@@gnu.org} and
-@email{gnu-music-discuss@@gnu.org}. Please consult the faq before
-mailing your problems.
+For Debian in development ("unstable", the future 2.3 or 3.0):
-If you find bugs, please send bug reports to
-@email{bug-gnu-music@@gnu.org}.
-
-Bugs that are LilyPond's fault are listed in our TODO list on the
-web, or demonstrated in @file{input/bugs/}.
+@example
+ apt-get install task-debian-devel task-c++-dev \
+ python-base libguile9-dev tetex-bin libkpathsea-dev \
+ tetex-extra flex bison texinfo bibtex2html groff gs \
+ netpbm pnmtopng m4 gettext
+@end example
-Bugs that are not LilyPond's fault are documented here.
+And, just so that old fonts from previous versions of LilyPond won't
+interfere with your build, you may want to do this before the build too:
+@example
+ dpkg --purge lilypond lilypond1.3
+@end example
-@unnumbered LinuxPPC Bugs:
-@itemize @bullet
-@item egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
-fixed in egcs-1.1.2-12f or gcc-2.95-0a, @uref{ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/}
-@item egcs-1.0.2 (LinuxPPC R4):
-all compiling with @code{-O2} is suspect, in particular guile-1.3, and
-Lily herself will break.
-@end itemize
+@section Problems
+For help and questions use @email{help-gnu-music@@gnu.org} and
+@email{gnu-music-discuss@@gnu.org}. Please consult the faq before
+mailing your problems. If you find bugs, please send bug reports to
+@email{bug-gnu-music@@gnu.org}.
+Bugs that are not fault of LilyPond are documented here.
-@unnumbered Linux-i386
+@unnumberedsubsec NetBSD
@itemize @bullet
-@item SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)
-
-Lily will crash during parsing (which suggests a C++ library
-incompatibility). Precise cause, precise platform description or
-solution are not known.
-
-Note that this only happens on some computers with the said platform.
-
-@item libg++ 2.7
-
-LilyPond occasionally crashes while parsing the initialisation files.
-This is a very obscure bug, and usually entering the commandline
-differently "fixes" it.
+@item The flex precompiled in NetBSD-1.4.2 is broken.
+Download flex-2.5.4a, build, install.
+@item The configuration of Gcc (egcs-2.91.60 19981201 (egcs-1.1.1
+release)) does not include @file{/usr/pkg} paths. Configure using:
@example
- lilypond input.ly
-@end example
-and
-@example
- lilypond -I. ./input.ly
-@end example
-makes a difference
+CFLAGS='-I /usr/pkg/include' LDFLAGS='-L/usr/pkg/lib' ./configure
-Typical stacktrace:
-@example
- SIGSEGV
- __libc_malloc (bytes=16384)
- ?? ()
- yyFlexLexer::yy_create_buffer ()
- Includable_lexer::new_input (this=0x8209a00, s=@{strh_ = @{
@end example
-This behaviour has been observed with machines that have old libg++
-versions (LinuxPPC feb '98, RedHat 4.x).
@end itemize
-
-
-
-@unnumbered Solaris:
+@unnumberedsubsec Solaris:
@itemize @bullet
@item Sparc64/Solaris 2.6, GNU make-3.77
GNU make-3.77 is buggy on this platform, upgrade to 3.78.1 or newer.
-
@item Sparc64/Solaris 2.6, ld
Not yet resolved.
@end itemize
-@unnumbered AIX
+@unnumberedsubsec AIX
@itemize @bullet
@item AIX 4.3 ld
@quotation
Some versions of the AIX binder (linker) can fail with a relocation
overflow severe error when the -bbigtoc option is used to link
- GCC-produced object files into an executable that overflows the TOC. A
- fix for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND
+ GCC-produced object files into an executable that overflows the TOC.
+ A fix for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND
-BBIGTOC) is available from IBM Customer Support and from its
27service.boulder.ibm.com website as PTF U455193.