\input texinfo @c -*-texinfo-*-
+@documentencoding utf-8
+@documentlanguage en
@setfilename INSTALL.info
@settitle INSTALL - compiling and installing GNU LilyPond
-@documentencoding utf-8
-@documentlanguage en
+
+@set INSTALL 1
@node Top
@top
@contents
-@chapter Compiling and installing on Unix
-
-
-@html
-<a name="download-source">
-@end html
-
-@section Downloading
-
-Even numbered minor versions are `stable' (2.6, 2.8, etc), while odd
-version are development releases (2.7, 2.9, etc). Building LilyPond
-is an involved process. If possible
-@uref{http://lilypond.org/install,download a precompiled binary} for
-your platform.
-
-@subsection Source code
-
-Download source
-@itemize @bullet
-@item tarballs from
-@itemize @bullet
-@uref{http://lilypond.org/download/} by HTTP.
-@item @uref{ftp://sca.uwaterloo.ca/pub/} by FTP (Canadian mirror).
-@end itemize
-@item
-CVS from @uref{http://savannah.gnu.org/cvs/?group=lilypond,savannah.gnu.org}
-@itemize @bullet
-@c @quotation
-@example
-CVS_RSH=ssh cvs -d:ext:anoncvs@@savannah.gnu.org:/cvsroot/lilypond co lilypond
-@end example
-@c @end quotation
-The CVS repository does not contain generated files. To create
-@file{configure}, run
-@example
-./autogen.sh
-@end example
-@end itemize
-@end itemize
-
-For information on packaging, see @uref{http://lilypond.org/devel}.
-
-@subsection Precompiled binary packages
-
-Check out @uref{http://lilypond.org/web/install/} for up to date
-information on binary packages for your platform.
-
-
-@section Requirements
-
-@subsection Compilation
-
-In addition to the packages needed for running Lilypond (see below),
-you need the following extra packages for building.
-
-When installing a binary package FOO, you may need to install the
-FOO-devel, libFOO-dev or FOO-dev package too.
-
-@itemize
-
-@item @uref{http://fontforge.sf.net/,FontForge} 20060125 or newer.
-
-@item New Century Schoolbook fonts, as PFB files. These are shipped
-with X11 and Ghostscript, and are named @file{c059033l.pfb}
-@file{c059036l.pfb}, @file{c059013l.pfb} and @file{c059016l.pfb}
-
-@item @uref{http://www.xs4all.nl/~hanwen/mftrace/,mftrace} (1.1.19 or
-newer),
-
-You will need to install some additional packages to get mftrace to
-work.
-
-@item @uref{http://www.gnu.org/software/guile/guile.html,GUILE}
-(version 1.6.7 or newer). If you are installing binary packages, you
-may need to install guile-devel or guile-dev or libguile-dev too.
-
-@item @uref{ftp://ftp.gnu.org/gnu/texinfo/,Texinfo} (version 4.8 or newer).
-
-@item
- @uref{http://gcc.gnu.org/, The GNU c++ compiler} (version 4.x or
-newer).
-
-@item @uref{http://www.python.org,Python} (version 2.3 or newer)
-
-@item @uref{ftp://ftp.gnu.org/gnu/make/,GNU Make} (version 3.78 or newer).
-
-@item @uref{http://www.gnu.org/software/gettext/gettext.html,gettext}.
-
-
-@item @uref{http://www.gnu.org/software/flex/,Flex}
-
-@item @uref{http://www.perl.org/,Perl}
-
-@item @uref{http://www.gnu.org/software/flex/,GNU Bison}
-
-@item All packages required for running, including development packages with
-header files and libraries.
-
-@end itemize
-
-@subsection Running requirements
-
-Running LilyPond requires proper installation of the following
-software
-
-@itemize @bullet
-
-@item @uref{http://www.freetype.org/,Freetype} (version 2).
-@item @uref{http://www.freetype.org/,FontConfig} (version 2.2).
-@item @uref{http://www.pango.org/,Pango} (version 1.12 or newer).
-@item @uref{http://www.gnu.org/software/guile/guile.html,GUILE}
-(version 1.8.0 or newer).
-@item @uref{http://www.python.org,Python} (version 2.4 or newer).
-@item @uref{http://www.ghostscript.com,Ghostscript} (version 8.15 or
-newer. 8.50 recommended)
-@end itemize
-
-@subsection Building documentation
-
-You can view the documentation online at
-@uref{http://lilypond.org/doc/}, but you can also build it locally.
-This process requires a successful compile of lilypond. The
-documentation is built by issuing
-@quotation
-@example
-make web
-@end example
-@end quotation
-
-Building the website requires some additional tools and packages
-
-@itemize @bullet
-@item The @uref{http://netpbm.sourceforge.net/,netpbm utilities}
-@item ImageMagick
-@item International fonts (see input/regression/utf-8.ly for hints
-about which font packages are necessary for your platform)
-@item Ghostscript, 8.50 with the patch from
-@uref{http://bugs.ghostscript.com/show_bug.cgi?id=688154}
-and the patch from
-@uref{http://bugs.ghostscript.com/show_bug.cgi?id=688017}.
-@end itemize
-
-The HTML files can be installed into the standard documentation path
-by issuing
-
-@quotation
-@example
-make out=www web-install
-@end example
-@end quotation
-
-
-@section Building LilyPond
-
-To install GNU LilyPond, type
-@quotation
-@example
-gunzip -c lilypond-x.y.z | tar xf -
-cd lilypond-x.y.z
-./configure # run with --help for applicable options
-make
-make install
-@end example
-@end quotation
-
-If you are not root, you should choose a @code{--prefix} argument that
-points into your home directory, e.g.
-@quotation
-@example
-./configure --prefix=$HOME/usr
-@end example
-@end quotation
-
-
-@subsection Configuring for multiple platforms
-
-If you want to build multiple versions of LilyPond with different
-configuration settings, you can use the @code{--enable-config=CONF}
-option of configure. You should use @samp{make conf=CONF} to generate
-the output in @file{out-CONF}. Example: Suppose you want to build
-with and without profiling, then use the following for the normal
-build
-
-@quotation
-@example
-./configure --prefix=$HOME/usr/ --enable-checking
-make
-make install
-@end example
-@end quotation
-
-and for the profiling version, specify a different configuration
-
-@quotation
-@example
-./configure --prefix=$HOME/usr/ --enable-profiling --enable-config=prof --disable-checking
-make conf=prof
-make conf=prof install
-@end example
-@end quotation
-
-
-@section Emacs mode
-
-An Emacs mode for entering music and running LilyPond is contained in
-the source archive in the @file{elisp} directory. Do @command{make
-install} to install it to @var{elispdir}. The file @file{lilypond-init.el}
-should be placed to @var{load-path}@file{/site-start.d/} or appended
-to your @file{~/.emacs} or @file{~/.emacs.el}.
-
-As a user, you may want add your source path (e.g. @file{~/site-lisp/}) to
-your @var{load-path} by appending the following line (as modified) to your
-@file{~/.emacs}
-@c any reason we do not advise: (push "~/site-lisp" load-path)
-@quotation
-@example
-(setq load-path (append (list (expand-file-name "~/site-lisp")) load-path))
-@end example
-@end quotation
-
-
-@section Vim mode
-
-A Vim mode for entering music and running LilyPond is contained in the
-source archive in @code{$VIM} directory.
-
-The LilyPond file type is detected if the file @file{~/.vim/filetype.vim} @c
-has the following content
-@quotation
-@example
-if exists("did_load_filetypes")
- finish
-endif
-augroup filetypedetect
- au! BufNewFile,BufRead *.ly setf lilypond
-augroup END
-@end example
-@end quotation
-
-Please include this path by appending the following line to your
-@file{~/.vimrc}
-
-@quotation
-@example
-set runtimepath+=/usr/local/share/lilypond/$@{LILYPOND_VERSION@}/vim/
-@end example
-@end quotation
-
-@noindent
-where $@{LILYPOND_VERISON@} is your lilypond version. If Lilypond was not
-installed in @file{/usr/local/}, then change this path accordingly.
-
-
-@section Problems
-
-For help and questions use @email{lilypond-user@@gnu.org}. Send bug
-reports to @email{bug-lilypond@@gnu.org}.
-
-Bugs that are not fault of LilyPond are documented here.
-
-@subsection Bison 1.875
-
-There is a bug in bison-1.875: compilation fails with "parse error
-before `goto'" in line 4922 due to a bug in bison. To fix, please
-recompile bison 1.875 with the following fix
-
-@quotation
-@example
-$ cd lily; make out/parser.cc
-$ vi +4919 out/parser.cc
-# append a semicolon to the line containing "__attribute__ ((__unused__))
-# save
-$ make
-@end example
-@end quotation
-
-
-
-@unnumberedsubsec Gcc-3.0.4
-
-Gcc 3.0.4 is flaky; upgrade GCC.
-
-@unnumberedsubsec Flex-2.5.4a and gcc-3.x
-
-Flex 2.5.4a does not produce g++-3.1.1 compliant C++ code. To compile
-LilyPond with gcc-3.1.1 or higher you may do
-
-@quotation
-@example
-CONF=gcc-3.1 ./lexer-gcc-3.1.sh
-CPPFLAGS=-I$(pwd)/lily/out-gcc-3.1 CC=gcc-3.1 CXX=g++-3.1 \
-./configure --enable-config=gcc-3.1
-CONF=gcc-3.1 ./lexer-gcc-3.1.sh
-make conf=gcc-3.1
-@end example
-@end quotation
-
-@unnumberedsubsec MacOS X
-
-For Fink, use the following command to compile.
-
-@verbatim
-export GUILE=guile-1.6
-export GUILE_CONFIG=guile-1.6-config
-export PKG_CONFIG_PATH=/sw/lib/freetype219/lib/pkgconfig/:/sw/lib/fontconfig2/lib/pkgconfig/
-./configure
-@end verbatim
-
-@unnumberedsubsec NetBSD
-
-@itemize @bullet
-@item The flex precompiled in NetBSD-1.4.2 is broken.
-Upgrade to flex-2.5.4a.
-@end itemize
-
-@unnumberedsubsec Solaris
-
-@itemize @bullet
-@item Solaris7, ./configure
-
-@file{./configure} needs a POSIX compliant shell. On Solaris7,
-@file{/bin/sh} is not yet POSIX compliant, but @file{/bin/ksh} or bash
-is. Run configure like
-@quotation
-@example
- CONFIG_SHELL=/bin/ksh ksh -c ./configure
-@end example
-@end quotation
-or
-@quotation
-@example
- CONFIG_SHELL=/bin/bash bash -c ./configure
-@end example
-@end quotation
-
-@end itemize
+@include macros.itexi
+@include contributor/basic-compile.itexi
@bye
projects / lilypond.git / blobdiff