-@node Top, , , (dir)
-@top
-@comment node-name, next, previous, up\input texinfo @c -*-texinfo-*-
+\input texinfo @c -*-texinfo-*-
@setfilename INSTALL.info
@settitle INSTALL - compiling and installing GNU LilyPond
-@html
-<!--- @@WEB-TITLE@@=Installation Instructions --->
-@end html
+@documentencoding utf-8
+@documentlanguage en
-@contents
-
-@chapter INSTALL - compiling and installing GNU LilyPond
+@node Top
+@top
+@contents
-This document describes how to build LilyPond on Unix platforms. It
-is also known to run and compile on Windows NT/95/98/ME/XP as well.
-More information on this topic can be found at the
-@uref{http://www.lilypond.org/cygwin/, LilyPond on Windows page}.
+@chapter Compiling and installing on Unix
@html
@section Downloading
-Even numbered versions are `stable'. The webpages for the stable version
-(1.4) reside @uref{http://www.gnu.org/software/lilypond, on the GNU
-servers}. Big enhancements go into the latest odd numbered version
-(1.5), whose webpages are on @uref{http://www.lilypond.org/,the lilypond
-site}.
+Even numbered minor versions are `stable' (2.6, 2.8, etc), while odd
+version are development releases (2.7, 2.9, etc). Building LilyPond
+is an involved process. If possible
+@uref{http://lilypond.org/install,download a precompiled binary} for
+your platform.
@subsection Source code
-If you want to compile LilyPond from source, download here:
+Download source
@itemize @bullet
-@item Download development releases from
-@c Hmm, these won't show up in lilypond.org/stats
-@c Otoh, lilypond.org is not updated when release mail arrives
-@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/} by FTP and
-@uref{http://ftp.cs.uu.nl/pub/GNU/LilyPond/}, by HTTP.
-@item @uref{ftp://sca.uwaterloo.ca/pub/} by FTP (Canadian mirror)
-@item at @code{lilypond.org}
-@uref{ftp://ftp.lilypond.org/pub/LilyPond/} by FTP and
-@uref{http://www.lilypond.org/ftp/} by HTTP.
-@end itemize
-
-
-For Red Hat Linux and SuSE Linux, @file{.spec} files are included in the
-tarball; see instructions below.
-
-
-
-Of course, if your platform supports LilyPond, such as Debian GNU/Linux,
-FreeBSD, OpenBSD or NetBSD, you're encouraged to use the native build
-from source drill.
-
-The latest development version is also available through anonymous
-CVS. See @uref{http://savannah.gnu.org/cvs/?group=lilypond}.
-
-CVS does not contain generated files. To create @file{configure}, run
-@quotation
+@item tarballs from
+@uref{http://lilypond.org/download/} by HTTP.
+@item tarballs from
+@uref{http://download.linuxaudio.org/lilypond/} by HTTP.
+@item
+GIT from @uref{http://git.sv.gnu.org/gitweb/?p=lilypond.git;a=summary,git.sv.gnu.org}
@example
-./autogen.sh
+git clone git://git.sv.gnu.org/lilypond.git
@end example
-@end quotation
-
-@html
-<a name="download-binaries">
-@end html
-
-
-
-@subsection Precompiled binaries
-
-If you want to track bleeding edge development, try:
-
-@itemize @bullet
-@item @uref{ftp://ftp.debian.org/debian/pool/main/l/lilypond/, Debian
-GNU/Linux} usually has the latest binaries for the most useful stable
-and development versions, while
-@item @uref{http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/,
-Mandrake Cooker} also provides fairly recent versions.
-@end itemize
-
-Binaries are made available for other popular platforms, but as we need
-to compile them ourselves, they are not updated for every version
-released.
-
-@itemize @bullet
-@item @uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/RedHat/RPMS/, Red Hat i386}
-@item @uref{ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE, SuSE}
-@item @uref{ftp://ftp.lilypond.org/pub/LilyPond/binaries/linuxppc/,
-LinuxPPC}
-@item
-@uref{http://www.lilypond.org/gnu-windows/, Windows}
-@end itemize
-
-@subsection Upgrading
-There are two options for upgrading sources.
-
-@itemize
-@item if you have an unpacked source tree of a previous version, you
-may the patches.
-
-@emph{If you upgrade by patching do remember to rerun autoconf after
-applying the patch}.
-
-@item if you have the @code{.tar.gz} file of a previous release, you can
-use
-@uref{ftp://ftp.xcf.berkeley.edu/pub/xdelta/, xdelta}.
- This is much safer than using patches, and is the recommended way.
-
-The following command produces @file{lilypond-1.4.3.tar.gz} from
-@file{lilypond-1.4.2.tar.gz} identical (up to compression dates) to the .3
-on the FTP site.
+The repository does not contain generated files. To create
+@file{configure}, run
@example
- xdelta patch lilypond-1.4.2-1.4.3.xd lilypond-1.4.2.tar.gz
+./autogen.sh
@end example
@end itemize
-@subsection Font problems.
-
-If you are upgrading from a previous version of LilyPond, be sure to
-remove all old font files. These include @file{.pk} and @file{.tfm} files
-that may be located in @file{/var/lib/texmf}, @file{/var/spool/texmf},
-@file{/var/tmp/texmf} or @file{@var{prefix}/share/lilypond/fonts/}. A
-script automating this has been included, see
-@file{buildscripts/clean-fonts.sh}.
+For information on packaging, see @uref{http://lilypond.org/devel}.
+@subsection Precompiled binary packages
+Check out @uref{http://lilypond.org/web/install/} for up to date
+information on binary packages for your platform.
@section Requirements
@subsection Compilation
-You need the following packages to compile Lilypond.
+In addition to the packages needed for running Lilypond (see below),
+you need the following extra packages for building.
-@itemize
-@item The GNU c++ compiler (version 2.95.2 or newer).
-EGCS 1.1 may work, but is no longer supported.
-Check out @uref{ftp://ftp.gnu.org/gnu/gcc/, the gcc site}.
+When installing a binary package FOO, you may need to install the
+FOO-devel, libFOO-dev or FOO-dev package too.
-WARNING: if you choose to upgrade to GCC 3.x, enquire if your
-distribution supports g++ 3.x and flex. At the time of writing (Fri
-Jul 5 2002), @strong{no} distribution that we know of ships a flex
-that generates gcc-3.1.x compliant C++ code.
+@itemize
-@item Python (version 1.5 or newer).
-Check out @uref{http://www.python.org, the python website}.
+@item @uref{http://fontforge.sf.net/,FontForge} 20060125 or newer.
-@item GUILE (version 1.4 or newer).
-Check out
-@uref{http://www.gnu.org/software/guile/guile.html,the GUILE webpage}.
+@item New Century Schoolbook fonts, as PFB files. These are shipped
+with X11 and Ghostscript, and are named @file{c059033l.pfb}
+@file{c059036l.pfb}, @file{c059013l.pfb} and @file{c059016l.pfb}
-@item GNU Make.
-Check out
-@uref{ftp://ftp.gnu.org/gnu/make/, the GNU
-make FTP directory}.
+@item @uref{http://www.xs4all.nl/~hanwen/mftrace/,mftrace} (1.1.19 or
+newer),
-@item Flex (version 2.5.4a or newer).
-Check out @uref{http://www.gnu.org/software/flex/,the Flex webpage}.
+You will need to install some additional packages to get mftrace to
+work.
-WARNING: plain Flex 2.5.4(a) generates invalid C++ code. GCC 3.x
-chokes on this. If you wish to use GCC 3.x, make sure that your
-distribution supports g++ 3.x and flex. For workarounds, see
-lexer-gcc-3.0.patch and lexer-gcc-3.1.sh in the source directory.
+@item @uref{http://www.gnu.org/software/guile/guile.html,GUILE}
+(version 1.8.2 or newer). If you are installing binary packages, you
+may need to install guile-devel or guile-dev or libguile-dev too.
-@item Bison (version 1.25 or newer).
-Check out @uref{http://www.gnu.org/software/bison/,the bison webpage}
+@item @uref{ftp://ftp.gnu.org/gnu/texinfo/,Texinfo} (version 4.8 or newer).
-@item @TeX{}.
+@item
+@uref{http://gcc.gnu.org/, The GNU c++ compiler} (version 4.x or
+newer).
-@TeX{} is used as an output backend.
+@item @uref{http://www.python.org,Python} (version 2.3 or newer)
-Also, @TeX{}'s libkpathsea is used to find the fonts (@file{.mf},
-@file{.afm}, @file{.tfm}). Make sure you have tetex 1.0 or newer
-(1.0.6 is known to work). You may need to install a tetex-devel (or
-tetex-dev or libkpathsea-dev) package too.
+@item @uref{ftp://ftp.gnu.org/gnu/make/,GNU Make} (version 3.78 or newer).
-@item Texinfo (version 4.2 or newer).
-The documentation of lily is written in texinfo. Check out
-@uref{ftp://ftp.gnu.org/gnu/texinfo/,the texinfo FTP directory}.
+@item @uref{http://www.gnu.org/software/gettext/gettext.html,gettext}.
-@item The geometry package for LaTeX is needed to use ly2dvi.
-It is available at
-@uref{ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry,the
-FTP directory for @code{geometry}}. This package is normally included
-with the @TeX{} distribution.
+@item @uref{http://www.gnu.org/software/flex/,Flex}
-@item kpathsea, a library for searching (@TeX{}) files. @code{kpathsea} is
-usually included with your installation of @TeX{}. You may need to
-install a tetex-devel or tetex-dev package too. If kpathsea is not
-installed in a directory where the compiler normally looks, read the
-hints for Slackware below.
+@item @uref{http://www.perl.org/,Perl}
-In the very unlikely case that kpathsea is not available for your
-platform (ie, you're not running GNU/Linux, Windows, or any recent
-UNIX), you can compile LilyPond without kpathsea support. In that case,
-you'll probably have to indicate where @TeX{}'s tfm files live. Invoke
-configure something like:
+@item @uref{http://www.gnu.org/software/flex/,GNU Bison}
-@quotation
-@example
-./configure --without-kpathsea --enable-tfm-path=/usr/share/texmf/fonts/tfm/public/cm/:/usr/share/texmf/fonts/tfm/ams/symbols
-@end example
-@end quotation
+@item All packages required for running, including development packages with
+header files and libraries.
@end itemize
@subsection Running requirements
-GNU LilyPond does use a lot of resources. For operation you need the
-following software
+Running LilyPond requires proper installation of the following
+software
@itemize @bullet
-@item @TeX{}.
-@item Xdvi and Ghostscript
-@item GUILE 1.4, or newer.
-Check out
-@uref{http://www.gnu.org/software/guile.html,the GUILE webpage}
-@end itemize
-
-For running LilyPond successfully you have to help @TeX{} and MetaFont find
-various files. The recommended way of doing so is adjusting the
-environment variables in the start-up scripts of your shell. Appropriate
-Csh and bourne sh scripts are left in
-@file{buildscripts/out/lilypond-profile} and
-@file{buildscripts/out/lilypond-login} after compilation.
-
-LilyPond is a big and slow program. A fast CPU and plenty of RAM is
-recommended for comfortable use.
-
-@subsection Building website
-
-The documentation comes in the form of a website. You can view this
-website on the internet, but you can also build it locally. This process
-requires a successful compile of lilypond. The website is built
-by issuing
-@example
- make web-doc
-
-@end example
-
-Building the website requires some additional tools:
-
-@itemize @bullet
-@item The netpbm utilities, see @uref{http://netpbm.sourceforge.net/}
-@item mftrace 1.0 or newer, needed for generating PostScript Type1
-fonts. Get it from @uref{http://www.cs.uu.nl/~hanwen/mftrace/}. You
-will need to install some additional packages to get mftrace to work.
+@item @uref{http://www.freetype.org/,Freetype} (version 2).
+@item @uref{http://www.freetype.org/,FontConfig} (version 2.2).
+@item @uref{http://www.pango.org/,Pango} (version 1.12 or newer).
+@item @uref{http://www.gnu.org/software/guile/guile.html,GUILE}
+(version 1.8.2 or newer), or patch 1.8.x with
+@uref{http://lilypond.org/vc/gub.darcs/patches/guile-1.8-rational.patch}.
+@item @uref{http://www.python.org,Python} (version 2.4 or newer).
+@item @uref{http://www.ghostscript.com,Ghostscript} (version 8.15 or
+newer. 8.50 recommended)
@end itemize
-@section Building LilyPond
-
-to install GNU LilyPond, type:
-@example
- gunzip -c lilypond-x.y.z | tar xf -
- cd lilypond-x.y.z
- ./configure # run with --help to see appropriate options
- make
- make install
- sh buildscripts/clean-fonts.sh
-@end example
-
-If you are doing an upgrade, you should remove all @file{feta}
-@code{.pk} and @file{.tfm} files. A script has been provided to do the
-work for you, see @file{buildscripts/clean-fonts.sh}.
-
-
-If you are not root, you should choose a @code{--prefix} argument that
-points into your home directory, eg.
-@example
-
- ./configure --prefix=$HOME/usr
-
-@end example
-
-In this case, you have to insert the contents of
-@code{buildscripts/out/lilypond-login} or
-@code{buildscripts/out/lilypond-profile} into your start up scripts by
-hand.
-
-
-
-@subsection Configuring for multiple platforms
-
-If you want to build multiple versions of LilyPond with different
-configuration settings, you can use the @code{--enable-config=CONF}
-option of configure. You should use @samp{make conf=CONF} to generate
-the output in @file{out-CONF}. Example: suppose I want to build with
-and without profiling. Then I'd use the following for the normal
-build,
-@c prefix=~ ?
-@example
-
- ./configure --prefix=$HOME/usr/ --enable-checking
- make
- make install
-@end example
-
-and for the profiling version, I specify a different configuration.
-
-@example
-
- ./configure --prefix=$HOME/usr/ --enable-profiling --enable-config=prof --disable-checking
- make conf=prof
- make conf=prof install
-
-@end example
-
-
-
+@subsection Building documentation
-
-@section Emacs mode
-
-An Emacs mode for entering music and running LilyPond is included with
-the source archive as @file{lilypond-mode.el},
-@file{lilypond-indent.el} and @file{lilypond-font-lock.el}. You
-should install these files somewhere in your @var{load-path}. If you
-have installed a precompiled LilyPond package, these files can be
-found in @file{/usr/share/doc/lilypond-x.y.z/}.
-
-Add this to your @file{~/.emacs} or @file{~/.emacs.el}, or install this
-file in Emacs' @file{site-start.d}:
+You can view the documentation online at
+@uref{http://lilypond.org/doc/}, but you can also build it locally.
+This process requires a successful compile of lilypond. The
+documentation is built by issuing
@quotation
@example
- ;;; lilypond-init.el --- Startup code for LilyPond mode
-
- (autoload 'LilyPond-mode "lilypond-mode")
- (setq auto-mode-alist
- (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
-
- (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
+make web
@end example
@end quotation
-If you have the latest LilyPond-1.4.x Debian package, LilyPond-mode is
-automatically loaded, you not even need to modify your @code{~/.emacs}
-file.
-
-@section Compiling for distributions
-
-@subsection Red Hat Linux
-
-Red Hat 7.x i386 RPMS are available from
-@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/}. For running on
-a Red Hat system you need these packages: guile, tetex, tetex-latex,
-tetex-dvips, libstdc++, python, ghostscript.
-
-You can also compile them yourself. A spec file is in
-@file{make/out/lilypond.redhat.spec}. This file is distributed along
-with the sources. You can make the rpm by issuing
-@example
-
- tar xfz lilypond-x.y.z.tar.gz
- rpm -bb lilypond-x.y.z/make/out/lilypond.redhat.spec
- rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
-
-@end example
-
-For compilation on a Red Hat system you need these packages, in
-addition to the those needed for running: glibc-devel, gcc-c++,
-libstdc++-devel, guile-devel, flex, bison, texinfo, groff, mftrace,
-netpbm-progs, autotrace, t1utils.
-
-
-
-@subsection LinuxPPC
-
-
-Some LinuxPPC RPMS should available from
-@uref{ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/}.
-
-A LinuxPPC RPM can be made using the @file{lilypond.redhat.spec} file.
-
-@subsection SuSE
-
-Some SUSE RPMS should available from
-@uref{ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE}.
-
-You can also compile a RPM for SUSE yourself. A spec file is in
-@file{make/out/lilypond.suse.spec}, see the instructions for building
-the Red Hat RPM.
-
-You must have the following packages: guile tcsh tetex te_latex te_kpath
-te_mpost libpng python gpp libgpp gettext autoconf netpbm libnetpb
-gs_serv gs_lib gs_fonts guile
-
-@subsection Slackware
-
-No precompiled packages for Slackware are available.
-
-Problems have been reported with Slackware 7.0; apparently, it ships
-with a faulty compiler. Do not compile LilyPond with -O2 on this
-platform.
+Building the website requires some additional tools and packages
-At least on Slackware 8.0, you have to manually specify the paths to the
-Kpathsea library, see the section on kpathsea
-
-
-@subsection Mandrake
-
-Some binaries are available at rpmfind.net. Refer to
-@uref{http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/}.
-
-You can also compile a RPM for Mandrake yourself. A spec file is in
-@file{make/out/lilypond.mandrake.spec}, see the instructions for building
-the Red Hat RPM.
+@itemize @bullet
+@item The @uref{http://netpbm.sourceforge.net/,netpbm utilities}
+@item ImageMagick
+@item International fonts (see input/regression/utf-8.ly for hints
+about which font packages are necessary for your platform)
+@item Ghostscript, 8.50 with the patch from
+@uref{http://bugs.ghostscript.com/show_bug.cgi?id=688154}
+and the patch from
+@uref{http://bugs.ghostscript.com/show_bug.cgi?id=688017}.
+@end itemize
-@subsection Debian GNU/Linux
+The HTML files can be installed into the standard documentation path
+by issuing
-A Debian package is also available. You may install it easily by running
-@command{apt-get} as root:
+@quotation
@example
-
- apt-get install lilypond lilypond-doc
+make out=www web-install
@end example
+@end quotation
-You can also compile the .deb for Debian yourself, do:
-@example
- apt-get -b source lilypond
-@end example
+@section Building LilyPond
-If you're real impatient, you may even do:
+To install GNU LilyPond, type
+@quotation
@example
-
- cd lilypond-x.y.z # a previous version
- uscan # download and build latest directly from upstream
+gunzip -c lilypond-x.y.z | tar xf -
+cd lilypond-x.y.z
+./configure # run with --help for applicable options
+make
+make install
@end example
+@end quotation
-
-Debian's @TeX{} installation is a bit short on memory, you may want to
-increase it like this:
+If you are not root, you should choose a @code{--prefix} argument that
+points into your home directory, e.g.
+@quotation
@example
---- texmf.cnf.orig Sun Dec 16 23:47:07 2001
-+++ texmf.cnf Sun Dec 16 23:46:34 2001
-@@ -411,8 +411,8 @@
- main_memory.context = 1500000
- main_memory.mpost = 1000000
- main_memory = 263000 % words of inimemory available; also applies to inimf&mp
--extra_mem_top = 0 % extra high memory for chars, tokens, etc.
--extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
-+extra_mem_top = 1000000 % extra high memory for chars, tokens, etc.
-+extra_mem_bot = 1000000 % extra low memory for boxes, glue, breakpoints, etc.
-
- obj_tab_size.context = 300000
-
-@@ -430,7 +430,7 @@
- % Max number of characters in all strings, including all error messages,
- % help texts, font names, control sequences. These values apply to TeX and MP.
- pool_size.context = 750000
--pool_size = 125000
-+pool_size = 250000
- % Minimum pool space after TeX/MP's own strings; must be at least
- % 25000 less than pool_size, but doesn't need to be nearly that large.
- string_vacancies.context = 45000
+./configure --prefix=$HOME/usr
@end example
+@end quotation
-You could also export @env{extra_mem_top} and @env{extra_mem_bot} as
-environment variables if you do not want to or cannot modify
-@file{/etc/texmf/texmf.cnf}.
-
-Alternatively, visit
-
-@itemize @bullet
-@item @uref{http://packages.debian.org/lilypond,http://packages.debian.org/lilypond}
-@item @uref{http://people.debian.org/~foka/lilypond/,http://people.debian.org/~foka/lilypond/}
-for latest semi-unofficial build of LilyPond 1.4.2 for Debian 2.2 (potato) users.
-The official stable Debian 2.2 is stuck with the old LilyPond-1.3.24.
-Since LilyPond-1.4 has been released, the older lilypond1.3 Debian
-package is now obsolete.
-@end itemize
-Please contact Anthony Fok @email{lilypond@@packages.debian.org} for more
-information.
+@subsection Configuring for multiple platforms
-The build scripts are in the subdirectory @file{debian/}; you can
-make the .deb by doing, for example:
+If you want to build multiple versions of LilyPond with different
+configuration settings, you can use the @code{--enable-config=CONF}
+option of configure. You should use @samp{make conf=CONF} to generate
+the output in @file{out-CONF}. Example: Suppose you want to build
+with and without profiling, then use the following for the normal
+build
+@quotation
@example
- $ su - root
- # dpkg --purge lilypond lilypond1.3
- # exit
- $ tar xzf lilypond-1.4.3.tar.gz
- $ cd lilypond-1.4.3
- $ dch -p -v 1.4.3-0.local.1 "Local build."
- $ debuild -B
- $ su - root
- # dpkg -i ../lilypond_1.4.3*.deb
- # exit
- $
+./configure --prefix=$HOME/usr/ --enable-checking
+make
+make install
@end example
+@end quotation
-Use command @command{debuild} instead of @command{debuild -B} if you have
-a very fast machine and want to build the HTML, PS and DVI documentation
-too.
-
-For compilation on a Debian GNU/Linux system you need these packages,
-in addition to the those needed for running:
-
-@itemize @bullet
-@item g++, cpp, libc6-dev, libstdc++<@var{your-libstdc++-version-here}>-dev
-@item libguile<@var{your-libguile-version-here}>-dev
-@item make, m4, flex, bison
-@item gettext
-@item groff, texinfo
-@item tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
-@item dpkg-dev, debhelper, fakeroot
-@item gs, netpbm
-@item pnmtopng (only in Debian 2.2; pnmtopng has been merged with netpbm
- in Debian testing/unstable.)
-@end itemize
-
-Most of these are listed on the @samp{Build-Depends} line in the
-@file{debian/control} file. To ensure the creation of the lilypond deb is
-trouble-free, we recommend that you first install the following packages
-by running \@command{apt-get} as root before building the package:
-
-For Debian 2.2:
+and for the profiling version, specify a different configuration
+@quotation
@example
- apt-get install task-debian-devel task-c++-dev \
- python-base libguile6-dev tetex-bin tetex-dev \
- tetex-extra flex bison texinfo groff gs \
- netpbm pnmtopng m4 gettext
+./configure --prefix=$HOME/usr/ --enable-profiling --enable-config=prof --disable-checking
+make conf=prof
+make conf=prof install
@end example
+@end quotation
-For Debian in development ("unstable", the future 2.3 or 3.0):
-@example
- apt-get install binutils cpp gcc libc6-dev \
- g++ libstdc++2.10-dev \
- python-base libguile-dev tetex-bin libkpathsea-dev \
- tetex-extra flex bison texinfo groff gs \
- netpbm m4 gettext
-@end example
+@section Emacs mode
-And, just so that old fonts from previous versions of LilyPond won't
-interfere with your build, you may want to do this before the build too:
+An Emacs mode for entering music and running LilyPond is contained in
+the source archive in the @file{elisp} directory. Do @command{make
+install} to install it to @var{elispdir}. The file @file{lilypond-init.el}
+should be placed to @var{load-path}@file{/site-start.d/} or appended
+to your @file{~/.emacs} or @file{~/.emacs.el}.
+As a user, you may want add your source path (e.g. @file{~/site-lisp/}) to
+your @var{load-path} by appending the following line (as modified) to your
+@file{~/.emacs}
+@c any reason we do not advise: (push "~/site-lisp" load-path)
+@quotation
@example
- dpkg --purge lilypond lilypond1.3
+(setq load-path (append (list (expand-file-name "~/site-lisp")) load-path))
@end example
+@end quotation
-@subsection MacOS X
-LilyPond is available through fink, in the unstable cvs distribution.
+@section Vim mode
-You need to:
-@itemize @bullet
-@item Get the Fink package manager from @uref{http://fink.sourceforge.net}
-@item Get the Lilypond package description by enabling the "unstable" tree
-in fink and executing @command{fink selfupdate-cvs}.
-@end itemize
+A Vim mode for entering music and running LilyPond is contained in the
+source archive in @code{$VIM} directory.
-Then do:
+The LilyPond file type is detected if the file @file{~/.vim/filetype.vim} @c
+has the following content
@quotation
@example
- fink install lilypond-unstable
+if exists("did_load_filetypes")
+ finish
+endif
+augroup filetypedetect
+ au! BufNewFile,BufRead *.ly setf lilypond
+augroup END
@end example
@end quotation
-That's it! The command should compile and install all LilyPond
-prerequisites (python, TeX, X11, ghostscript) and then LilyPond
-itself.
-
-
-@subsection compiling on MacOS X
-LilyPond has been built on Darwin, to be precise, on:
-@example
- Darwin buoux.aspiratie.nl 5.3 Darwin Kernel Version 5.3: Thu Jan 24
- 22:06:02 PST 2002; root:xnu/xnu-201.19.obj~1/RELEASE_PPC Power Macintosh powerpc
-@end example
-
-using:
+Please include this path by appending the following line to your
+@file{~/.vimrc}
+@quotation
@example
- Apple Computer, Inc. version gcc-932.1, based on gcc version 2.95.2 19991024 (release)
+set runtimepath+=/usr/local/share/lilypond/$@{LILYPOND_VERSION@}/vim/
@end example
+@end quotation
-To make sure you have all packages needed to build LilyPond installed,
-run as root:
-
-@example
- apt-get install bash python guile debianutils flex bison texinfo \
- ghostscript6 netpbm m4 gettext
-@end example
-
-and:
-
-@example
- fink install tetex
-@end example
-
-For more information about @file{apt-get} and @file{fink}, see
-@uref{http://fink.sf.net,fink.sourceforge.net}.
-
-@c brokenness of autoconf; don't ask
-Then, configure, patch, make and install LilyPond using these commands:
-
-@example
- CC="cc -I/sw/include" CXX="c++ -I/sw/include" LDFLAGS="-L/sw/lib" \
- ./configure --prefix=/sw
- make -C lily out/parser.hh out/parser.cc out/config.h
- patch -p0 < darwin.patch
- make -C lily out/parser.o
- make DEPENDENCIES_OUTPUT=/dev/null all
- make install
-@end example
+@noindent
+where $@{LILYPOND_VERISON@} is your lilypond version. If Lilypond was not
+installed in @file{/usr/local/}, then change this path accordingly.
-For installing, you must be root, of course.
-@c Why isn't this in BUGS (where it belongs?)
@section Problems
-For help and questions use @email{lilypond-user@@gnu.org}. Please
-consult the FAQ before mailing your problems. If you find bugs, please
-send bug reports to @email{bug-lilypond@@gnu.org}.
+For help and questions use @email{lilypond-user@@gnu.org}. Send bug
+reports to @email{bug-lilypond@@gnu.org}.
Bugs that are not fault of LilyPond are documented here.
-@subsection Linking to kpathsea
-
-If kpathsea and the corresponding header files are installed in some
-directory where GCC does not search by default, for example in
-@file{/usr/local/lib/} and @file{/usr/local/include/} respectively,
-you have to explicitly tell configure where to find it. To do this,
-
-@itemize
-@item @code{rm config.cache}
-@item @code{export LDFLAGS=-L/usr/share/texmf/lib}
-@item @code{export CPPFLAGS=-I/usr/share/texmf/include}
-@item @code{./configure}
-@end itemize
-Once configure has found them, the paths are stored in
-@file{config.make} and will be used even if you don't have the
-environment variables set during make.
-
-
-@unnumberedsubsec Gcc-3.0.4
-
-Gcc 3.0.4, is a bit flaky. Try downgrading to 2.95.x, or if you're
-adventurous (see below), upgrading to 3.1.x.
+@subsection Bison 1.875
-@unnumberedsubsec Flex-2.5.4a and gcc-3.x
-
-Flex 2.5.4a does not produce g++-3.0 compliant C++ code. To compile
-LilyPond with gcc-3.0 you may do:
-
-@example
- CC=gcc-3.0 CXX=g++-3.0 ./configure --enable-config=gcc-3.0
- make conf=gcc-3.0 -C lily out-gcc-3.0/lexer.cc
- patch -p1 < lexer-gcc-3.0.patch
- make conf=gcc-3.0 -C lily
-@end example
-
-Note that this is fixed in Debian/unstable for flex >= 2.5.4a-13.
-
-@unnumberedsubsec Flex-2.5.4a and gcc-3.1.x
-
-Flex 2.5.4a does not produce g++-3.1.1 compliant C++ code. To compile
-LilyPond with gcc-3.1.1 you may do:
+There is a bug in bison-1.875: compilation fails with "parse error
+before `goto'" in line 4922 due to a bug in bison. To fix, please
+recompile bison 1.875 with the following fix
+@quotation
@example
- CONF=gcc-3.1 ./lexer-gcc-3.1.sh
- CPPFLAGS=-I$(pwd)/lily/out-gcc-3.1 CC=gcc-3.1 CXX=g++-3.1 \
- ./configure --enable-config=gcc-3.1
- CONF=gcc-3.1 ./lexer-gcc-3.1.sh
- make conf=gcc-3.1
+$ cd lily; make out/parser.cc
+$ vi +4919 out/parser.cc
+# append a semicolon to the line containing "__attribute__ ((__unused__))
+# save
+$ make
@end example
+@end quotation
-This assumes that the GCC 3.1 binaries are called gcc-3.1 and g++-3.1.
-Note that this is @strong{not} fixed in Debian/unstable for flex <=
-2.5.4a-26.
-@unnumberedsubsec Linux-2.4.0, Guile-1.4 --with-threads
+@unnumberedsubsec MacOS X
-There's a bug in certain kernels around version 2.4.0, that is
-triggered when using Guile 1.4 compiled with pthreads. You'll see
-random segmentation fault crashes of LilyPond. Upgrade to a newer
-version of Linux. If you can't do that, you may try to recompiling
-Guile without threads (YMMV):
+For Fink, use the following command to compile.
-@example
- guile-1.4$ ./configure --without-threads; make all install
-@end example
+@verbatim
+export GUILE=guile-1.6
+export GUILE_CONFIG=guile-1.6-config
+export PKG_CONFIG_PATH=/sw/lib/freetype219/lib/pkgconfig/:/sw/lib/fontconfig2/lib/pkgconfig/
+./configure
+@end verbatim
-@unnumberedsubsec OpenBSD
+@unnumberedsubsec Solaris
@itemize @bullet
-@item By default, gcc on OpenBSD doesn't include
-@file{/usr/local/include} and @file{/usr/local/lib} in the system
-paths. Depending upon where/how you installed kpathsea and other
-libraries, you may need to refer to the section ``Linking to
-kpathsea''.
-
-@end itemize
+@item Solaris7, ./configure
-@unnumberedsubsec NetBSD
-
-@itemize @bullet
-@item The flex precompiled in NetBSD-1.4.2 is broken.
-Download flex-2.5.4a, build, install.
-
-@item The configuration of Gcc (egcs-2.91.60 19981201 (egcs-1.1.1
-release)) does not include @file{/usr/pkg} paths. Configure using:
+@file{./configure} needs a POSIX compliant shell. On Solaris7,
+@file{/bin/sh} is not yet POSIX compliant, but @file{/bin/ksh} or bash
+is. Run configure like
+@quotation
@example
-
-CFLAGS='-I /usr/pkg/include' LDFLAGS='-L/usr/pkg/lib' ./configure
-
+ CONFIG_SHELL=/bin/ksh ksh -c ./configure
@end example
-
-@end itemize
-
-@unnumberedsubsec Solaris:
-
-@itemize @bullet
-@item Sparc64/Solaris 2.6, GNU make-3.77
-
-GNU make-3.77 is buggy on this platform, upgrade to 3.78.1 or newer.
-
-@item Sparc64/Solaris 2.6, ld
-
-Not yet resolved.
-@end itemize
-
-
-@unnumberedsubsec AIX
-
-@itemize @bullet
-@item AIX 4.3 ld
-
-The following is from the gcc install/SPECIFIC file.
-@quotation
- Some versions of the AIX binder (linker) can fail with a relocation
- overflow severe error when the -bbigtoc option is used to link
- GCC-produced object files into an executable that overflows the TOC.
- A fix for APAR IX75823 (OVERFLOW DURING LINK WHEN USING GCC AND
- -BBIGTOC) is available from IBM Customer Support and from its
- 27service.boulder.ibm.com website as PTF U455193.
-
- Binutils does not support AIX 4.3 (at least through release 2.9). GNU
- as and GNU ld will not work properly and one should not configure GCC
- to use those GNU utilities. Use the native AIX tools which do
- interoperate with GCC.
@end quotation
-
-add -Wl,-bbigtoc to USER_LDFLAGS, ie:
+or
+@quotation
@example
- LDFLAGS='-Wl,-bbigtoc' ./configure
+ CONFIG_SHELL=/bin/bash bash -c ./configure
@end example
+@end quotation
@end itemize
-
@bye
-
+