Guide, node Updating translation committishes..
@end ignore
-@c \version "2.12.0"
+@c \version "2.14.0"
@node Wind instruments
@section Wind instruments
@lilypondfile[quote]{wind-headword.ly}
-This section includes some elements of music notation that arise when
-writing for winds.
+This section includes elements of music notation that arise when
+writing specifically for wind instruments.
@menu
* Common notation for wind instruments::
@node Common notation for wind instruments
@subsection Common notation for wind instruments
-This section discusses some issues common to most wind instruments.
+This section discusses notation common to most wind instruments.
@menu
* References for wind instruments::
@item Legato playing is indicated by @ref{Slurs}.
@item Different types of tonguings, ranging from legato to non-legato to
staccato are usually shown by articulation marks, sometimes combined
-with slurs, see @ref{Articulations and ornamentations} and @ref{List of
-articulations}.
+with slurs, see @ref{Articulations and ornamentations} and
+@ref{List of articulations}.
@item Flutter tonguing is usually indicated by placing a tremolo mark
and a text markup on the note. See @ref{Tremolo repeats}.
@end itemize
-There are also other aspects of musical notation that can apply to wind
-instruments:
+Other aspects of musical notation that can apply to wind instruments:
@itemize
@item Many wind instruments are transposing instruments, see
@item Harmonic series glissandi, which are possible on all brass
instruments but common for French Horns, are usually written out as
@ref{Grace notes}.
-@item Pitch inflections at the end of a note are discussed in @ref{Falls
-and doits}.
+@item Pitch inflections at the end of a note are discussed in
+@ref{Falls and doits}.
@item Key slaps or valve slaps are often shown by the @code{cross} style
of @ref{Special note heads}.
@item Woodwinds can overblow low notes to sound harmonics. These are
-shown by the @code{flageolet} articulation. See @ref{List of articulations}.
+shown by the @code{flageolet} articulation.
+See @ref{List of articulations}.
@item The use of brass mutes is usually indicated by a text markup, but
where there are many rapid changes it is better to use the
-@code{stopped} and @code{open} articulations. See @ref{Articulations and
-ornamentations} and @ref{List of articulations}.
+@code{stopped} and @code{open} articulations.
+See @ref{Articulations and ornamentations} and
+@ref{List of articulations}.
@item Stopped horns are indicated by the @code{stopped} articulation.
See @ref{Articulations and ornamentations}.
@end itemize
@unnumberedsubsubsec Fingerings
All wind instruments other than the trombone require the use of several
-fingers to produce each pitch. Some fingering helps are shown in
+fingers to produce each pitch. Some fingering examples are shown in
the snippets below.
Woodwind diagrams can be produced and are described in
@node Bagpipes
@subsection Bagpipes
-This section includes extra information for writing for bagpipes.
+This section discusses notation common bagpipes.
@menu
* Bagpipe definitions::
@funindex \showKeySignature
@funindex showKeySignature
-LilyPond contains special definitions for music for the Scottish
-highland bagpipe; to use them, add
+LilyPond contains special definitions for Scottish, Highland Bagpipe
+music; to use them, add
@example
\include "bagpipe.ly"
@end example
@noindent
-at the top of your input file. This lets you add the special grace notes
+to the top of your input file. This lets you add the special grace notes
common to bagpipe music with short commands. For example, you could
write @code{\taor} instead of
\grace @{ \small G32[ d G e] @}
@end example
-@code{bagpipe.ly} also contains pitch definitions for the bagpipe
+@file{bagpipe.ly} also contains pitch definitions for the bagpipe
notes in the appropriate octaves, so you do not need to worry about
@code{\relative} or @code{\transpose}.
@node Woodwinds
@subsection Woodwinds
-This section describes notation specifically for woodwinds.
+This section discusses notation specifically for woodwind instruments.
@menu
* Woodwind diagrams::
@subsubsection Woodwind diagrams
Woodwind diagrams can be used to indicate the fingering to be used
-to play specific notes. Woodwind diagrams are available for most woodwind
-instruments.
-
-Woodwind diagrams are available for the following instruments:
+for specific notes and are available for the following instruments:
@itemize
@item piccolo
@item clarinet
@item bass clarinet
@item saxophone
-@item basson
+@item bassoon
@item contrabassoon
@end itemize
@noindent
-The diagrams and the scheme instrument names are shown in the snippet below.
-
Woodwind diagrams are created as markups:
-@lilypond[verbatim, quote, relative=2]
-c1^ \markup \woodwind-diagram #'piccolo #'((lh . (gis))
- (cc . (one three))
- (rh . (ees)))
+@lilypond[verbatim,quote,relative=2]
+c1^\markup {
+ \woodwind-diagram #'piccolo #'((lh . (gis))
+ (cc . (one three))
+ (rh . (ees)))
+}
@end lilypond
Keys can be open, partially-covered, ring-depressed, or fully covered:
-@lilypond [verbatim, quote, relative=2]
+@lilypond[verbatim,quote,relative=2]
\textLengthOn
-c1^ \markup \center-column {
- "one quarter"
- \woodwind-diagram #'flute #'((cc . (one1q))
- (lh . ())
- (rh . ()))
+c1^\markup {
+ \center-column {
+ "one quarter"
+ \woodwind-diagram #'flute #'((cc . (one1q))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "one half"
- \woodwind-diagram #'flute #'((cc . (one1h))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "one half"
+ \woodwind-diagram #'flute #'((cc . (one1h))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "three quarter"
- \woodwind-diagram #'flute #'((cc . (one3q))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "three quarter"
+ \woodwind-diagram #'flute #'((cc . (one3q))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "ring"
- \woodwind-diagram #'flute #'((cc . (oneR))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "ring"
+ \woodwind-diagram #'flute #'((cc . (oneR))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "full"
- \woodwind-diagram #'flute #'((cc . (oneF two))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "full"
+ \woodwind-diagram #'flute #'((cc . (oneF two))
+ (lh . ())
+ (rh . ()))
+ }
}
@end lilypond
-Trills are indicated in the woodwind diagrams as shaded keys:
+Trills are indicated as shaded keys:
-@lilypond [verbatim, quote, relative=2]
-c1^ \markup \woodwind-diagram #'bass-clarinet
- #'((cc . (threeT four))
- (lh . ())
- (rh . (b fis)))
+@lilypond[verbatim,quote,relative=2]
+c1^\markup {
+ \woodwind-diagram #'bass-clarinet
+ #'((cc . (threeT four))
+ (lh . ())
+ (rh . (b fis)))
+}
@end lilypond
A variety of trills can be displayed:
-@lilypond [verbatim, quote, relative=2]
+@lilypond[verbatim,quote,relative=2]
\textLengthOn
-c1^ \markup \center-column {
- "one quarter to ring"
- \woodwind-diagram #'flute #'((cc . (one1qTR))
- (lh . ())
- (rh . ()))
+c1^\markup {
+ \center-column {
+ "one quarter to ring"
+ \woodwind-diagram #'flute #'((cc . (one1qTR))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "ring to shut"
- \woodwind-diagram #'flute #'((cc . (oneTR))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "ring to shut"
+ \woodwind-diagram #'flute #'((cc . (oneTR))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "ring to open"
- \woodwind-diagram #'flute #'((cc . (oneRT))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "ring to open"
+ \woodwind-diagram #'flute #'((cc . (oneRT))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "open to shut"
- \woodwind-diagram #'flute #'((cc . (oneT))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "open to shut"
+ \woodwind-diagram #'flute #'((cc . (oneT))
+ (lh . ())
+ (rh . ()))
+ }
}
-c1^ \markup \center-column {
- "one quarter to three quarters"
- \woodwind-diagram #'flute #'((cc . (one1qT3q))
- (lh . ())
- (rh . ()))
+
+c1^\markup {
+ \center-column {
+ "one quarter to three quarters"
+ \woodwind-diagram #'flute #'((cc . (one1qT3q))
+ (lh . ())
+ (rh . ()))
+ }
}
@end lilypond
can be displayed on the console or in the log file, although they
will not show up in the music output:
-@lilypond[verbatim, quote]
+@lilypond[verbatim,quote]
#(print-keys-verbose 'flute)
@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{woodwind-diagrams-listing.ly}
-@lilypondfile[verbatim, lilyquote, texidoc, doctitle]
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{graphical-and-text-woodwind-diagrams.ly}
-@lilypondfile[verbatim, lilyquote, texidoc, doctitle]
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{changing-the-size-of-woodwind-diagrams.ly}
-@lilypondfile[verbatim, lilyquote, texidoc, doctitle]
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{woodwind-diagrams-key-lists.ly}
@seealso
Internals Reference:
@rinternals{TextScript},
@rinternals{instrument-specific-markup-interface}.
-
-@knownissues