Guide, node Updating translation committishes..
@end ignore
-@c \version "2.13.36"
+@c \version "2.14.0"
@node Simultaneous notes
Notation Reference:
@ref{Chord notation},
@ref{Articulations and ornamentations},
-@ref{Relative octave entry}.
+@ref{Relative octave entry},
+@ref{Multiple voices}.
Snippets:
@rlsr{Simultaneous notes}.
+@knownissues
+Chords containing more than two pitches within a staff space,
+such as @samp{<e f! fis!>}, create overlapping noteheads.
+Depending on the situation, better representations might involve
+
+@itemize
+
+@item
+temporary use of @ref{Multiple voices},
+@samp{<< f! \\ <e fis!> >>},
+
+@item
+enharmonic transcription of one or more pitches,
+@samp{<e f ges>}, or
+
+@item
+@ref{Clusters}.
+
+@end itemize
@node Chord repetition
@unnumberedsubsubsec Chord repetition
@ref{Articulations and ornamentations}.
Installed Files:
-@file{ly/@/chord@/-repetition@/-init@/.ly}.
+@file{ly/chord-repetition-init.ly}.
@node Simultaneous expressions
would otherwise collide with a stem from another voice, and only
if the colliding stems point in the same direction. The
@code{\shiftOff} command prevents this type of shifting from
-occuring.
+occurring.
By default, the outer voices (normally voices one and two) have
@code{\shiftOff} specified, while the inner voices (three and
@snippets
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{additional-voices-to-avoid-collisions.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{forcing-horizontal-shift-of-notes.ly}
@rinternals{RestCollision}.
-@knownissues
-
@ignore
+@knownissues
@c TODO investigate! Sometimes it works, sometimes not. --FV
The requirements for successfully merging different note heads that
are at the same time differently dotted are not clear.
@end ignore
-There is no support for chords where the same note occurs with
-different accidentals in the same chord. In this case, it is
-recommended to use enharmonic transcription, or to use special
-cluster notation (see @ref{Clusters}).
-
-
@node Automatic part combining
@unnumberedsubsubsec Automatic part combining
@funindex \partcombine
@funindex partcombine
-Automatic part combining is used to merge two parts of music onto
-a staff. It is aimed at typesetting orchestral scores. When the
-two parts are identical for a period of time, only one is shown.
-In places where the two parts differ, they are typeset as separate
-voices, and stem directions are set automatically. Also, solo and
-@notation{a due} parts are identified and marked by default.
+Automatic part combining is used to merge two separate parts of music
+onto a single staff. This can be especially helpful when typesetting
+orchestral scores. A single @code{Voice} is printed while the two parts
+of music are the same, but in places where they differ, a second
+@code{Voice} is printed. Stem directions are set up & down accordingly
+while Solo and @notation{a due} parts are also identified and marked
+appropriately.
-The syntax for part combining is:
+The syntax for automatic part combining is:
@example
\partcombine @var{musicexpr1} @var{musicexpr2}
@end example
-The following example demonstrates the basic functionality of the
-part combiner: putting parts on one staff and setting stem
-directions and polyphony. The same variables are used for the
-independent parts and the combined staff.
+The following example demonstrates the basic functionality, putting
+parts on a single staff as polyphony and setting stem directions
+accordingly. The same variables are used for the independent parts and
+the combined staff.
@lilypond[quote,verbatim]
instrumentOne = \relative c' {
- c4 d e f
- R1
- d'4 c b a
- b4 g2 f4
- e1
+ c4 d e f |
+ R1 |
+ d'4 c b a |
+ b4 g2 f4 |
+ e1 |
}
instrumentTwo = \relative g' {
- R1
- g4 a b c
- d c b a
- g f( e) d
- e1
+ R1 |
+ g4 a b c |
+ d4 c b a |
+ g4 f( e) d |
+ e1 |
}
<<
>>
@end lilypond
-The notes in the third measure appear only once, although they were
-specified in both parts. Stem, slur, and tie directions are set
-automatically, depending whether there is a solo or unison. When
-needed in polyphony situations, the first part (with context called
-@code{one}) always gets up stems, while the second (called @code{two})
-always gets down stems. In solo situations, the first and second
-parts get marked with @q{Solo} and @q{Solo II}, respectively. The
-unisono (@notation{a due}) parts are marked by default with the text
-@qq{a2}.
-
-Both arguments to @code{\partcombine} will be interpreted as
-@code{Voice} contexts. If using relative octaves,
-@code{\relative} should be specified for both music expressions,
+Both parts have identical notes in the third measure, so only one
+instance of the notes is printed. Stem, slur, and tie directions are
+set automatically, depending on whether the parts are playing solo or in
+unison. When needed in polyphony situations, the first part (with
+context called @code{one}) gets @qq{up} stems, while the second (called
+@code{two}) always gets @qq{down} stems. In solo situations, the first
+and second parts get marked with @qq{Solo} and @qq{Solo II},
+respectively. The unison (@notation{a due}) parts are marked with the
+text @qq{a2}.
+
+Both arguments to @code{\partcombine} will be interpreted as separate
+@code{Voice} contexts, so if the music is being specified in relative
+mode then @emph{both} parts must contain a @code{\relative} function,
i.e.,
@example
@end example
@noindent
-A @code{\relative} section that is outside of @code{\partcombine}
-has no effect on the pitches of @code{@var{musicexpr1}} and
+A @code{\relative} section that encloses a @code{\partcombine} has no
+effect on the pitches of @code{@var{musicexpr1}} or
@code{@var{musicexpr2}}.
+@funindex \partcombineChords
+@funindex partcombineChords
+@funindex \partcombineApart
+@funindex partcombineApart
+@funindex \partcombineUnisono
+@funindex partcombineUnisono
+@funindex \partcombineSoloI
+@funindex partcombineSoloI
+@funindex \partcombineSoloII
+@funindex partcombineSoloII
+@funindex \partcombineAutomatic
+@funindex partcombineAutomatic
+
+In professional scores, voices are often kept apart from each other for
+long passages of music even if some of the notes are the same in both
+voices, and could just as easily be printed as unison. Combining notes
+into a chord, or showing one voice as solo is, therefore, not ideal as
+the @code{\partcombine} function considers each note separately. In this
+case the @code{\partcombine} function can be overriden with the
+following commands:
+
+Commands ending in @code{...Once} apply only to the next note in the
+music expression.
+
+@itemize
+@item
+@code{\partcombineApart} and @code{\partcombineApartOnce} keep the
+notes as two separate voices, even if they can be combined into a chord
+or unison.
+
+@item
+@code{\partcombineChords} and @code{\partcombineChordsOnce} combine the
+notes into a chord.
+
+@item
+@code{\partcombineUnisono} and @code{\partcombineUnisonoOnce} combine
+both voices as @qq{unison}.
+
+@item
+@code{\partcombineSoloI} and @code{\partcombineSoloIOnce} print only
+voice one, and mark it as a @qq{Solo}.
+
+@item
+@code{\partcombineSoloII} or @code{\partcombineSoloIIOnce} print only
+voice two and mark it as a @qq{Solo}.
+
+@item
+@code{\partcombineAutomatic} and @code{\partcombineAutomaticOnce} end
+the functions of the commands above, and revert back to the standard
+@code{\partcombine} functionality.
+@end itemize
+
+@lilypond[quote,verbatim]
+instrumentOne = \relative c' {
+ \partcombineApart c2^"apart" e |
+ \partcombineAutomatic e2^"auto" e |
+ \partcombineChords e'2^"chord" e |
+ \partcombineAutomatic c2^"auto" c |
+ \partcombineApart c2^"apart" \partcombineChordsOnce e^"chord once" |
+ c2 c |
+}
+instrumentTwo = \relative c' {
+ c2 c |
+ e2 e |
+ a,2 c |
+ c2 c' |
+ c2 c |
+ c2 c |
+}
+
+<<
+ \new Staff { \instrumentOne }
+ \new Staff { \instrumentTwo }
+ \new Staff { \partcombine \instrumentOne \instrumentTwo }
+>>
+@end lilypond
+
+
@snippets
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{combining-two-parts-on-the-same-staff.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{changing-partcombine-texts.ly}
@rinternals{PartCombineMusic},
@rinternals{Voice}.
-
@knownissues
-@code{\partcombine} can only accept two voices.
-
-When @code{printPartCombineTexts} is set, if the two voices play
-the same notes on and off, the part combiner may typeset @code{a2}
-more than once in a measure.
-
-@code{\partcombine} cannot be inside @code{\times}.
-
-@code{\partcombine} cannot be inside @code{\relative}.
-
-Internally, the @code{\partcombine} interprets both arguments as
-@code{Voice}s and decides when the parts can be combined. When they have
-different durations they cannot be combined and are given the names
-@code{one} and @code{two}. Consequently, if the arguments switch to
-differently named @rinternals{Voice} contexts, the events in those will
-be ignored. Likewise, partcombining isn't designed to work with lyrics;
-when one of the voices is explicitly named in order to attach lyrics to
-it, the partcombining stops working.
-
-@code{\partcombine} only observes onset times of notes. It cannot
-determine whether a previously started note is playing or not, leading
-to various problems.
+All @code{\partcombine...} functions can only accept two voices and are
+not designed to work with lyrics; such that when one of the voices is
+explicitly named in order to attach lyrics to it, the partcombiner will
+stop working.
+
+@code{\partcombine...} functions cannot be placed inside a @code{\times}
+or @code{\relative} block.
+
+If @code{printPartCombineTexts} is set and the two voices play the same
+notes @qq{on and off}, in the same measure, the part combiner may
+typeset @code{a2} more than once in that measure.
+
+@code{\partcombine} only knows when a note starts in a @code{Voice}; it
+cannot, for example, remember if a note in one @code{Voice} has already
+started when combining notes that have just started in the other
+@code{Voice}. This can lead to a number of unexpected issues including
+@qq{Solo} or @qq{Unison} marks being printed incorrectly.
+
+@code{\partcombine} keeps all spanners (slurs, ties, hairpins etc.) in
+the same @code{Voice} so that if any such spanners start or end in a
+different @code{Voice}, they may not be printed properly or at all.
+
+If the @code{\partcombine} function cannot combine both music
+expressions (i.e. when both voices have different durations), it will
+give the voices, internally, its own custom names: @code{one} and
+@code{two} respectively. This means if there is any @qq{switch} to a
+differently named @code{Voice} context, the events in that differently
+named @code{Voice} will be ignored.
+
+Refer also to @emph{Known issues and warnings} when using
+@code{\partcombine} with tablature in @ref{Default tablatures} and the
+@emph{Note} in @ref{Automatic beams} when using automatic beaming.
@node Writing music in parallel
projects / lilypond.git / blobdiff