Guide, node Updating translation committishes..
@end ignore
-@c \version "2.14.0"
+@c \version "2.17.6"
@node Simultaneous notes
@section Simultaneous notes
-@lilypondfile[quote]{simultaneous-headword.ly}
+@lilypondfile[quote,ragged-right,line-width=16\cm]{simultaneous-headword.ly}
Polyphony in music refers to having more than one voice occurring
in a piece of music. Polyphony in LilyPond refers to having more
and ornamentation.
@lilypond[verbatim,quote,relative=2]
-<a c\prall e>1 <a-> c-^ e>2 <f-. a c-. e-.>4 <a-+ c-->8. <g\fermata c e\turn>16
+<a c\prall e>1 <a-> c-^ e>2 <f-. a c-. e-.>4
+<a-+ c-->8. <g\fermata c e\turn>16
@end lilypond
However some notation, such as dynamics, hairpins and slurs must be
they will not print.
@lilypond[verbatim,quote,relative=2]
-<a\f c( e>1 <a c) e>\f <a\< c e>( <a\! c e>) <a c e>\< <a c e> <a c e>\!
+<a\f c( e>1 <a c) e>\f <a\< c e>( <a\! c e>)
+<a c e>\< <a c e> <a c e>\!
+@end lilypond
+
+@cindex chords, empty
+@cindex placeholder events
+
+A chord acts merely as a container for its notes, its articulations and
+other attached elements. Consequently, a chord without notes inside
+does not actually have a duration. Any attached articulations will
+happen at the same musical time as the next following note or chord and
+be combined with them (for more complex possibilities of combining such
+elements, see @ref{Simultaneous expressions}):
+
+@lilypond[verbatim,quote,relative=2]
+\grace { g8[( a b] }
+<> ) \p \< -. -\markup \italic "sempre staccato"
+\repeat unfold 4 { c4 e } c1\f
@end lilypond
@cindex relative pitch, chords
@end itemize
+
@node Chord repetition
@unnumberedsubsubsec Chord repetition
+@cindex Chord, repetition
+@cindex repetition, using @code{q}
+
In order to save typing, a shortcut can be used to repeat the preceding
chord. The chord repetition symbol is @code{q}:
other non-chorded notes or rests have been added since.
@lilypond[verbatim,quote,relative=2]
-<a c e>1 c4 q2 r8 q8
+<a c e>1 c'4 q2 r8 q8 |
+q2 c, |
@end lilypond
However, the chord repetition symbol does not retain any dynamics,
-articulation or ornamentation within, or attached to the previous chord.
+articulation or ornamentation within, or attached to, the previous
+chord.
@lilypond[verbatim,quote,relative=2]
-<a-. c\prall e>1\sfz c4 q2 r8 q8
+<a-. c\prall e>1\sfz c'4 q2 r8 q8 |
+q2 c, |
@end lilypond
+To have some of them retained, the @code{\chordRepeats} function can be
+be called explicitly with an extra argument specifying a list of
+@var{event types} to keep unless events of that type are already
+present on the @code{q} chord itself.
+
+@lilypond[verbatim,quote]
+\relative c'' {
+ \chordRepeats #'(articulation-event)
+ { <a-. c\prall e>1\sfz c'4 q2 r8 q8-. } |
+ q2 c, |
+}
+@end lilypond
+
+Here using @code{\chordRepeats} inside of a @code{\relative} construction
+produces unexpected results: once chord events have been expanded, they
+are indistinguishable from having been entered as regular chords, making
+@code{\relative} assign an octave based on their current context.
+
+Since nested instances of @code{\relative} don't affect one another,
+another @code{\relative} inside of @code{\chordRepeats} can be used for
+establishing the octave relations before expanding the repeat chords.
+In that case, the whole content of the inner @code{\relative} does not
+affect the outer one; hence the different octave entry of the final note
+in this example.
+
+@c Without \new Voice, implicit voice creation does the dumbest thing.
+@lilypond[verbatim,quote]
+\new Voice
+\relative c'' {
+ \chordRepeats #'(articulation-event)
+ \relative c''
+ { <a-. c\prall e>1\sfz c'4 q2 r8 q8-. } |
+ q2 c |
+}
+@end lilypond
+
+Interactions with @code{\relative} occur only with explicit calls of
+@code{\chordRepeats}: the implicit expansion at the start of typesetting
+is done at a time where all instances of @code{\relative} have already
+been processed.
+
@seealso
Notation Reference:
@ref{Chord notation},
@end lilypond
This can be useful if the simultaneous sections have identical
-rhythms, but attempts to attach notes with different durations
-to the same stem will cause errors.
+rhythms, but attempts to attach notes with different durations to
+the same stem will cause errors. Notes, articulations, and property
+changes in a @emph{single} @samp{Voice} are collected and engraved in
+musical order:
+
+@lilypond[quote,verbatim,relative=2]
+<a c>4-. <>-. << c a >> << { c-. <c a> } { a s-. } >>
+@end lilypond
+
+Multiple stems or beams or different note durations or properties at
+the same musical time require the use of multiple voices.
The following example shows how simultaneous expressions can
generate multiple staves implicitly:
<< { a4 b g2 } { d4 g2 c,4 } >>
@end lilypond
-Here different rhythms cause no problems.
+Here different rhythms cause no problems because they are
+interpreted in different voices.
@cindex collisions, clashing note columns
@cindex collisions, ignoring
will appear during compilation. This message can be suppressed by:
@example
-\override NoteColumn #'ignore-collision = ##t
+\override NoteColumn.ignore-collision = ##t
@end example
However, this not only suppresses the warning but will prevent any
even simultaneously. In such a case no attempt is made to
automatically avoid collisions between ordinary notes and clusters.
-
@seealso
Music Glossary:
@rglos{cluster}.
@rinternals{ClusterSpannerBeacon},
@rinternals{Cluster_spanner_engraver}.
-
@knownissues
-
Clusters look good only if they span at least two chords; otherwise
they appear too narrow.
Clusters do not produce MIDI output.
+
@node Multiple voices
@subsection Multiple voices
@funindex \oneVoice
@funindex oneVoice
-@strong{@i{Explicitly instantiating voices}}
+@subsubsubheading Explicitly instantiating voices
The basic structure needed to achieve multiple independent
voices in a single staff is illustrated in the following example:
command returns all the voice settings to the neutral default
directions.
-@strong{@i{Temporary polyphonic passages}}
+@subsubsubheading Temporary polyphonic passages
A temporary polyphonic passage can be created with the following
construct:
Here, the @code{\voiceOne} and @code{\voiceTwo} commands are
required to define the settings of each voice.
-@strong{@i{The double backslash construct}}
+@subsubsubheading The double backslash construct
The @code{<< @{...@} \\ @{...@} >>} construct, where the two (or
more) expressions are separated by double backslashes, behaves
@code{Voice} contexts as explained in @rlearning{Contexts and engravers} and
@rlearning{Explicitly instantiating voices}.
-@strong{@i{Voice order}}
+@subsubsubheading Voice order
When entering multiple voices in the input file, use the following
order:
>>
@end lilypond
-@strong{@i{Identical rhythms}}
+@warning{Lyrics, spanners (such as slurs, ties, hairpins etc.) cannot be
+created @q{across} voices.}
+
+@subsubsubheading Identical rhythms
In the special case that we want to typeset parallel pieces of music
that have the same rhythm, we can combine them into a single
@code{\oneVoice}.
@endpredefined
-
@seealso
Learning Manual:
@rlearning{Voices contain music},
@code{\voiceNeutralStyle}.
@endpredefined
-
@seealso
Learning Manual:
@rlearning{I'm hearing Voices},
@cindex collisions, ignoring
@knownissues
-Using @code{\override NoteColumn #'ignore-collision = ##t} will cause
+Using @code{\override NoteColumn.ignore-collision = ##t} will cause
differently headed notes in different voices to merge incorrectly.
@lilypond[quote,relative=1,verbatim]
\mergeDifferentlyHeadedOn
<< { c16 a' b a } \\ { c,2 } >>
-\override NoteColumn #'ignore-collision = ##t
+\override NoteColumn.ignore-collision = ##t
<< { c16 a' b a } \\ { c,2 } >>
@end lilypond
are at the same time differently dotted are not clear.
@end ignore
+
@node Automatic part combining
@unnumberedsubsubsec Automatic part combining
@lilypondfile[verbatim,quote,texidoc,doctitle]
{changing-partcombine-texts.ly}
-
@seealso
Music Glossary:
@rglos{a due},
@rinternals{Voice}.
@knownissues
-
All @code{\partcombine...} functions can only accept two voices and are
not designed to work with lyrics; such that when one of the voices is
explicitly named in order to attach lyrics to it, the partcombiner will
}
@end lilypond
-
@seealso
Learning Manual:
@rlearning{Organizing pieces with variables}.
projects / lilypond.git / blobdiff