Guide, node Updating translation committishes..
@end ignore
-@c \version "2.15.39"
+@c \version "2.17.5"
@node Rhythms
@section Rhythms
@funindex \overrideTimeSignatureSettings
In addition to setting the printed time signature, the @code{\time}
-command also sets time-signature-based default values for the properties
-@code{baseMoment}, @code{beatStructure}, and @code{beamExceptions}. The
-predefined default values for these properties can be found in
-@file{scm/time-signature-settings.scm}. The existing default values can
-be changed, or new default values can be added:
+command also sets the values of the time-signature-based properties
+@code{baseMoment}, @code{beatStructure}, and @code{beamExceptions}.
+The predefined default values for these properties can be found in
+@file{scm/time-signature-settings.scm}.
+
+The default value of @code{beatStructure} can be overridden in the
+@code{\time} command itself by supplying it as the optional first
+argument:
+
+@lilypond[quote,verbatim]
+\score {
+ \new Staff {
+ \relative c' {
+ \time #'(2 2 3) 7/8
+ \repeat unfold 7 { c8 } |
+ \time #'(3 2 2) 7/8
+ \repeat unfold 7 { c8 } |
+ }
+ }
+}
+@end lilypond
+
+Alternatively, the default values of all these time-signature-based
+variables, including @code{baseMoment} and @code{beamExceptions},
+can be set together. The values can be set independently for several
+different time signatures. The new values take effect when a
+subsequent @code{\time} command with the same value of the time
+signature is executed:
@lilypond[quote,verbatim]
\score {
@item
@code{@var{timeSignatureFraction}}, a fraction describing the
-time signature.
+time signature to which these values apply.
@item
@code{@var{baseMomentFraction}}, a fraction containing the numerator
}
@end lilypond
+A further method of changing these time-signature-related variables,
+which avoids reprinting the time signature at the time of the change,
+is shown in @ref{Setting automatic beam behavior}.
+
@predefined
@code{\numericTimeSignature},
@code{\defaultTimeSignature}.
Notation Reference:
@ref{Mensural time signatures},
+@ref{Setting automatic beam behavior},
@ref{Time administration}.
+Installed Files:
+@file{scm/time-signature-settings.scm}.
+
Snippets:
@rlsr{Rhythms}.
Polymetric notation is supported explicitly or by manually modifying the
visible time signature symbol and/or scaling note durations.
-@subsubheading Different time signatures with equal-length measures
+@subsubsubheading Different time signatures with equal-length measures
Set a common time signature for each staff, and set the
@code{timeSignatureFraction} to the desired fraction. Then use the
>>
@end lilypond
-@subsubheading Different time signatures with unequal-length measures
+@subsubsubheading Different time signatures with unequal-length measures
Each staff can be given its own independent time signature by
moving the @code{Timing_translator} and the
@cindex compound time signatures
@cindex time signature, compound
-@subsubheading Compound time signatures
+@subsubsubheading Compound time signatures
These are created using the @code{\compoundMeter} function. The syntax
for this is:
}
}
\new Voice \with {
- \consists Pitch_squash_engraver
+ \consists "Pitch_squash_engraver"
} \relative c'' {
\improvisationOn
c4 c8 c c4 c8 c
@funindex \set
@funindex set
+When automatic beaming is enabled, the placement of automatic beams
+is determined by three context properties:
+@code{baseMoment}, @code{beatStructure}, and @code{beamExceptions}.
+The default values of these variables may be overridden as described
+below, or alternatively the default values themselves may be changed
+as explained in @ref{Time signature}.
+
+If a @code{beamExceptions} rule is defined for the time signature in
+force, that rule is used to determine the beam placement. If no
+@code{beamExceptions} rule is defined for the time signature in force,
+the beam placement is determined by the settings of @code{baseMoment}
+and @code{beatStructure}.
+
+By default, @code{beamExceptions} rules are defined for most common
+time signatures, so the @code{beamException} rules must be disabled
+if automatic beaming is to be based on @code{baseMoment} and
+@code{beatStructure}. The @code{beamExceptions} rules are disabled
+by
+
+@example
+\set Timing.beamExceptions = #'()
+@end example
+
+
+@subsubsubheading Beaming based on @code{baseMoment} and @code{beatStructure}
+
In most instances, automatic beams will end at the end of a beat.
The ending points for beats are determined by the context properties
@code{baseMoment} and @code{beatStructure}. @code{beatStructure}
is a scheme list that defines the length of each beat in the measure
in units of @code{baseMoment}. By default, @code{baseMoment} is
-the one over numerator of the time signature. By default,
+one over the denominator of the time signature. By default,
each unit of length @code{baseMoment} is a single beat.
@lilypond[quote,relative=2,verbatim]
c16^"(3+2)" c c c c |
@end lilypond
+If a common time signature is being used, @code{beamExceptions}
+@emph{must} be disabled to enable @code{beatStructure} to work.
+The @code{\set Timing.beamExceptions = #'()} command can always
+be included if beaming is being determined by @code{beatStructure}.
+
+@lilypond[quote,relative=2,verbatim]
+\time 4/4
+a8^"default" a a a a a a a
+
+\set Timing.baseMoment = #(ly:make-moment 1 4)
+\set Timing.beatStructure = #'(1 1 1 1)
+a8^"no change" a a a a a a a
+
+\set Timing.beamExceptions = #'()
+\set Timing.baseMoment = #(ly:make-moment 1 4)
+\set Timing.beatStructure = #'(1 1 1 1)
+a8^"changed" a a a a a a a
+@end lilypond
+
Beam setting changes can be limited to specific contexts. If no
setting is included in a lower-level context, the setting of the
enclosing context will apply.
the time signature. Any exceptions to this default can be found in
@file{scm/time-signature-settings.scm}.
+@subsubsubheading Beaming based on @code{beamExceptions}
+
Special autobeaming rules (other than ending a beam on a beat)
are defined in the @code{beamExceptions} property.
@lilypond[quote,verbatim,relative=2]
\time 3/4
-% by default we beam in (3) due to beamExceptions
+% by default we beam in (6) due to beamExceptions
\repeat unfold 6 {a8} |
% This will beam (1 1 1) due to beatLength
\set Timing.beamExceptions = #'()
r4. a8 a a |
@end lilypond
-@i{@strong{How automatic beaming works}}
+@subsubsubheading How automatic beaming works
When automatic beaming is enabled, the placement of automatic beams
is determined by the context properties
{beam-endings-in-score-context.ly}
@seealso
+Notation Reference:
+@ref{Time signature}.
+
Installed Files:
-@file{scm/beam-settings.scm}.
+@file{scm/time-signature-settings.scm}.
Snippets:
@rlsr{Rhythms}.
f1 \bar "."
g1 \bar "||"
a1 \bar ".|"
-b1 \bar ".|."
+b1 \bar ".."
c1 \bar "|.|"
d1 \bar "|."
e1
together with dotted and dashed bar lines:
@lilypond[quote,relative=1,verbatim]
-f1 \bar ":"
-g1 \bar "dashed"
+f1 \bar ";"
+g1 \bar "!"
a1
@end lilypond
and five types of repeat bar line:
@lilypond[quote,relative=1,verbatim]
-f1 \bar "|:"
-g1 \bar ":|:"
+f1 \bar ".|:"
+g1 \bar ":..:"
a1 \bar ":|.|:"
b1 \bar ":|.:"
-c1 \bar ":|"
+c1 \bar ":|."
e1
@end lilypond
c4 c c c \break
\bar "S"
c4 c c c
-\bar "|S"
+\bar "S-|"
c4 c c c \break
-\bar "|S"
+\bar "S-|"
c4 c c c
-\bar "S|"
+\bar "S-S"
c4 c c c \break
-\bar "S|"
+\bar "S-S"
c1
@end lilypond
@lilypond[quote,relative=2,verbatim]
c4 c c c
-\bar "||:"
+\bar ".|:-||"
c4 c c c \break
-\bar "||:"
+\bar ".|:-||"
c4 c c c
@end lilypond
@lilypond[quote,relative=2,verbatim]
c4 c c c
-\bar ":|S"
+\bar ":|.S"
c4 c c c \break
-\bar ":|S"
+\bar ":|.S"
c4 c c c
-\bar ":|S."
+\bar ":|.S-S"
c4 c c c \break
-\bar ":|S."
+\bar ":|.S-S"
c4 c c c
-\bar "S|:"
+\bar "S.|:-S"
c4 c c c \break
-\bar "S|:"
+\bar "S.|:-S"
c4 c c c
-\bar ".S|:"
+\bar "S.|:"
c4 c c c \break
-\bar ".S|:"
+\bar "S.|:"
c4 c c c
-\bar ":|S|:"
+\bar ":|.S.|:"
c4 c c c \break
-\bar ":|S|:"
+\bar ":|.S.|:"
c4 c c c
-\bar ":|S.|:"
+\bar ":|.S.|:-S"
c4 c c c \break
-\bar ":|S.|:"
+\bar ":|.S.|:-S"
c1
@end lilypond
+Additionally there is an @code{\inStaffSegno} command which
+creates a segno bar, placed in cooperation
+with the @code{\repeat volta} command.
+
In scores with many staves, a @code{\bar} command in one staff is
automatically applied to all staves. The resulting bar lines are
@lilypond[quote,relative=2,verbatim]
<<
- \new Staff { e4 \bar "|:" \grace c16 d2. }
- \new Staff { c4 \bar "|:" d2. }
+ \new Staff { e4 \bar ".|:" \grace c16 d2. }
+ \new Staff { c4 \bar ".|:" d2. }
>>
@end lilypond
@lilypond[quote,relative=2,verbatim]
<<
- \new Staff { e4 \bar "|:" \grace c16 d2. }
- \new Staff { c4 \bar "|:" \grace s16 d2. }
+ \new Staff { e4 \bar ".|:" \grace c16 d2. }
+ \new Staff { c4 \bar ".|:" \grace s16 d2. }
>>
@end lilypond
\MyCadenza c'1
}
\new Staff {
- $(mmrest-of-length MyCadenza)
+ #(mmrest-of-length MyCadenza)
c'1
- $(skip-of-length MyCadenza)
+ #(skip-of-length MyCadenza)
c'1
}
>>
projects / lilypond.git / blobdiff