Translation of GIT committish: FILL-IN-HEAD-COMMITTISH
When revising a translation, copy the HEAD committish of the
- version that you are working on. See TRANSLATION for details.
+ version that you are working on. For details, see the Contributors'
+ Guide, node Updating translation committishes..
@end ignore
@c \version "2.12.0"
c4 c8 c16 c32 c64 c128 c128
@end lilypond
-@noindent
Here are the same durations with automatic beaming turned off.
@c not strictly "writing rhythms"; more of a "displaying" thing,
@endpredefined
+@snippets
+
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+{changing-the-number-of-augmentation-dots-per-note.ly}
+
+
@seealso
Music Glossary:
@rglos{breve},
@lilypond[quote,verbatim,relative=2]
\autoBeamOff
-c4 \times 4/5 { f8 e f \times 2/3 { e[ f g] } } f4 |
+c4 \times 4/5 { f8 e f \times 2/3 { e[ f g] } } f4
@end lilypond
Modifying nested tuplets which begin at the same musical moment
@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
{non-default-tuplet-numbers.ly}
+@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+{controlling-tuplet-bracket-visibility.ly}
+
@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
{permitting-line-breaks-within-beamed-tuplets.ly}
@rglos{tuplet},
@rglos{polymetric}.
-Learning Manual: @rlearning{Tweaking methods}.
+Learning Manual:
+@rlearning{Tweaking methods}.
Notation Reference:
@ref{Time administration},
@rinternals{TupletNumber},
@rinternals{TimeScaledMusic}.
+
@cindex grace notes within tuplet brackets
@knownissues
-When the first note on a staff is a grace note followed by a
-tuplet the grace note must be placed before the @code{\times}
-command to avoid errors. Anywhere else, grace notes may be
-placed within tuplet brackets.
+Grace notes may be placed within tuplet brackets, @emph{except}
+when a staff begins with a grace note followed by a tuplet. In this
+particular case, the grace note must be placed before the @code{\times}
+command to avoid errors.
+
+@cindex tempo marks within tuplet brackets
+
+When using a tuplet at the beginning of a piece with a @code{\tempo}
+mark, the music must be explicitly entered in a @code{\new Voice}
+block, as discussed in @rlearning{Voices contain music}.
@node Scaling durations
b16*4 c4
@end lilypond
-The duration of skip or spacing notes may also be modified by
+The duration of spacing notes may also be modified by
a multiplier. This is useful for skipping many measures, e.g.,
@code{s1*23}.
}
@end lilypond
-@noindent
One application of this command is in polymetric
notation, see @ref{Polymetric notation}.
a2 ~ a
@end lilypond
-
-@noindent
Ties are used either when the note crosses a bar line, or when
dots cannot be used to denote the rhythm. Ties should also be
used when note values cross larger subdivisions of the measure:
@funindex \laissezVibrer
@funindex laissezVibrer
-@notation{L.v.} ties (@notation{laissez vibrer}) indicate that
+@notation{L.v.}@: ties (@notation{laissez vibrer}) indicate that
notes must not be damped at the end. It is used in notation for
piano, harp and other string and percussion instruments. They can
be entered as follows:
c2 ~ c
@end lilypond
-Dash pattern definitions for ties have the same structure as
+Dash pattern definitions for ties have the same structure as
dash pattern definitions for slurs.
For more information about complex dash patterns,
-see the snippets under @ref{Slurs}.
+see the snippets under @ref{Slurs}.
@predefined
@code{\tieUp},
@rglos{tie},
@rglos{laissez vibrer}.
-Notation Reference:
+Notation Reference:
@ref{Slurs},
@ref{Automatic note splitting}.
@cindex lyrics, skip
Spacer rests are available only in note mode and chord mode. In
-other situations, for example, when entering lyrics, @code{\skip}
-is used to skip a musical moment. @code{\skip} requires an
-explicit duration.
+other situations, for example, when entering lyrics, the
+command @code{\skip} is used to skip a musical moment.
+@code{\skip} requires an explicit duration.
@lilypond[quote,verbatim,relative=2]
<<
>>
@end lilypond
+Because @code{\skip} is a command, it does not affect the default
+durations of following notes, unlike@tie{}@code{s}.
+
+@lilypond[quote,verbatim,relative=2]
+<<
+ {
+ \repeat unfold 8 {a4}
+ }
+ {
+ a4 \skip 2 a |
+ s2 a
+ }
+>>
+@end lilypond
+
+
A spacer rest implicitly causes @code{Staff} and @code{Voice}
contexts to be created if none exist, just like notes and rests
do:
@seealso
+Learning Manual:
+@rlearning{Visibility and color of objects}.
+
+Notation Reference:
+@ref{Hidden notes},
+@ref{Visibility of objects}.
+
Snippets:
@rlsr{Rhythms}.
-Internals Reference: @rinternals{SkipMusic}
+Internals Reference:
+@rinternals{SkipMusic}.
@node Full measure rests
@funindex \textLengthOn
@funindex textLengthOn
@funindex \textLengthOff
-@funindex textLenthOff
+@funindex textLengthOff
@funindex \fermataMarkup
@funindex fermataMarkup
@funindex \compressFullBarRests
Mensural time signatures are covered in
@ref{Mensural time signatures}.
+@cindex time signature default settings
+@cindex autobeaming properties for time signatures
+@cindex beaming, time signature default properties
+@funindex \overrideTimeSignatureSettings
+
+In addition to setting the printed time signature, the @code{\time}
+command also sets time-signature-based default values for the properties
+@code{baseMoment}, @code{beatStructure}, and @code{beamExceptions}. The
+predefined default values for these properties can be found in
+@file{scm/time-signature-settings.scm}. The existing default values can
+be changed, or new default values can be added:
+
+@lilypond[quote,verbatim]
+\score {
+ \relative c' {
+ \overrideTimeSignatureSettings
+ #'Score
+ #'(4 . 4) % time signature fraction
+ #'(1 . 4) % base moment fraction
+ #'(3 1) % beatStructure
+ #'() % beamExceptions
+ \time 4/4
+ \repeat unfold 8 c8 |
+ }
+}
+@end lilypond
+
+@code{\overrideTimeSignatureSettings} takes five arguments:
+context, time signature fraction, base moment, beat structure, and
+beaming exception. The context is a Scheme symbol that describes
+the context to which the default setting will apply. The
+time signature fraction is a Scheme pair describing the time signature.
+The base moment is a Scheme pair containing the
+numerator and denominator of the basic timing unit for the
+time signature. The beat structure is a Scheme list indicating
+the structure of the beats in the measure, in units of the base moment.
+The beaming exception is an alist containing any beaming rules for the
+time signature that go beyond ending at every beat,
+as described in @ref{Setting automatic beam behavior}.
+
+@cindex time signature properties, restoring default values
+@cindex restoring default properties for time signatures
+@funindex \revertTimeSignatureSettings
+
+Changed values of default time signature properties can be restored
+to the original values:
+
+@lilypond[quote,verbatim]
+
+\score{
+ \relative c' {
+ \repeat unfold 8 c8 |
+ \overrideTimeSignatureSettings
+ #'Score
+ #'(4 . 4)
+ #'(1 . 4)
+ #'(3 1)
+ #'((end . (((1 . 8) . (3 1)))))
+ \time 4/4
+ \repeat unfold 8 c8 |
+ \revertTimeSignatureSettings #'Score #'(4 . 4)
+ \time 4/4
+ \repeat unfold 8 c8 |
+ }
+}
+@end lilypond
@predefined
@code{\numericTimeSignature},
@cindex compound time signatures
@cindex time signature, compound
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
{compound-time-signatures.ly}
+@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+{time-signature-printing-only-the-numerator-as-a-number-instead-of-the-fraction.ly}
+
@seealso
Music Glossary:
\partial @var{duration}
@end example
-where @code{duration} is the rhythmic length of the interval
-before the start of the first complete measure:
+@noindent
+where @code{duration} is the rhythmic length of the remaining
+interval of the current measure before the start of the next.
@lilypond[quote,verbatim,relative=2]
\partial 4 e4 |
a2. c,4 |
@end lilypond
-The partial measure can be any duration less than a full measure:
+The partial measure can be any duration less than the full measure:
@lilypond[quote,verbatim,relative=2]
\partial 8*3 c8 d e |
a2. c,4 |
@end lilypond
-Internally, this is translated into
+Internally, @code{\partial @var{duration}} is translated into:
@example
-\set Timing.measurePosition = -@var{duration}
+\set Timing.measurePosition -@var{duration}
+@end example
+
+For example, @code{\partial 8*3} becomes:
+
+@example
+\set Timing.measurePosition = #(ly:make-moment -3 8)
@end example
The property @code{measurePosition} contains a rational number
indicating how much of the measure has passed at this point. Note
-that this is set to a negative number by the @code{\partial}
-command: i.e., @code{\partial 4} is internally translated to
-@code{-4}, meaning @qq{there is a quarter note left in the measure.}
-
+that this is set to a negative number by the @code{\partial} command:
+i.e., @code{\partial 4} is internally translated to @code{-4}, meaning
+@qq{there is a quarter note left in the measure.}
@seealso
Music Glossary:
Internal Reference:
@rinternals{Timing_translator}.
-
@knownissues
The @code{\partial} command is intended to be used only at the
beginning of a piece. If you use it after the beginning, some
-odd warnings may occur.
+odd warnings or effects may occur, in this case use
+@code{\set Timing.measurePosition} instead.
@node Unmetered music
@unnumberedsubsubsec Unmetered music
d4 e d c
@end lilypond
+Note that these predefined commands affect all staves in the
+score, even when they are placed in just one @code{Voice}
+context. To change this, move the @code{Timing_translator}
+from the @code{Score} context to the @code{Staff} context, as
+shown in @ref{Polymetric notation}.
@predefined
@code{\cadenzaOn},
@rglos{cadenza}.
Notation Reference:
-@ref{Visibility of objects}.
+@ref{Visibility of objects},
+@ref{Polymetric notation}.
Snippets:
@rlsr{Rhythms}.
@noindent
to indicate where breaks can occur.
+You must explicitly create a @code{Voice} context when starting a
+piece with @code{\cadenzaOn}, otherwise strange errors may occur.
+
+@lilypond[verbatim,relative=2,fragment]
+\new Voice \relative c'{
+ \cadenzaOn
+ c16^"Solo Free Time" d e f g2. \bar "||"
+ \cadenzaOff
+}
+@end lilypond
+
@node Polymetric notation
@unnumberedsubsubsec Polymetric notation
\new Staff {
\time 3/4
c4 c c |
- c c c |
+ c4 c c |
}
\new Staff {
\time 2/4
c4 c |
- c c |
- c c |
+ c4 c |
+ c4 c |
}
\new Staff {
\time 3/8
@knownissues
When using different time signatures in parallel, notes
-at the same moment will be be placed at the same horizontal
+at the same moment will be placed at the same horizontal
location. However, the bar lines in the different staves
will cause the note spacing to be less regular in each of the
individual staves than would be normal without the different
@seealso
-Music Glossary: @rglos{tie}
+Music Glossary:
+@rglos{tie}
Learning Manual:
@rlearning{Engravers explained},
automatic beaming should be switched off with @code{\autoBeamOff}
and the beams indicated manually.}
-Beaming patterns that differ from the automatic defaults may be
-created, see @ref{Setting automatic beam behavior}.
+Beaming patterns that differ from the automatic defaults can be
+created; see @ref{Setting automatic beam behavior}.
@predefined
Snippets:
@rlsr{Rhythms}.
-Internals Reference: @rinternals{Beam}.
+Internals Reference:
+@rinternals{Auto_beam_engraver},
+@rinternals{Beam_engraver},
+@rinternals{Beam},
+@rinternals{BeamEvent},
+@rinternals{BeamForbidEvent},
+@rinternals{beam-interface},
+@rinternals{unbreakable-spanner-interface}.
@knownissues
-Beams can collide with note heads and accidentals in other voices
+Beams can collide with note heads and accidentals in other voices.
@node Setting automatic beam behavior
@cindex lyrics and beaming
@funindex autoBeaming
-@funindex autoBeamSettings
-@funindex (end * * * *)
-@funindex (begin * * * *)
+@funindex baseMoment
+@funindex beamExceptions
+@funindex beatStructure
@funindex measureLength
-@funindex beatLength
-@funindex beatGrouping
@funindex \time
@funindex time
@funindex \set
@funindex set
-There are two types of beaming rules: @emph{beam-grouping}
-rules and @emph{beam-ending} rules. Beam-grouping rules are the
-simplest, but are over-ridden by any beam-ending rules which apply.
+The placement of automatic beams is determined by the context properties
+@code{baseMoment}, @code{beatStructure}, @code{beamExceptions},
+and @code{autoBeaming}.
-The placement of automatic beams is determined by applying the
-following rules in order:
+The following rules, in order of priority, apply when determining
+the appearance of beams:
@itemize
-
-@item If a manual beam is specified with @code{[..]} set the beam
+@item
+If a manual beam is specified with @code{[..]} set the beam
as specified, otherwise
-@item if @code{\autoBeamOff} is in force do not beam, otherwise
+@item
+if @code{\autoBeamOff} is in force do not beam, otherwise
-@item if a beam-ending rule applies use it to determine the valid
-places where beams may end, otherwise
+@item
+if a beam-ending rule is defined in @code{beamExceptions}
+for the beam type, use it to determine the valid places where
+beams may end, otherwise
-@item if a valid (see below) beat-grouping rule applies use it to
-group notes with beams, otherwise
+@item
+if a beam-ending rule is defined in @code{beamExceptions}
+for a larger beam-type, use it to determined the valid places
+where beams may end, otherwise
-@item use the value of @code{beatLength} to group notes with beams
+@item
+use the values of @code{baseMoment} and @code{beatStructure} to
+determine the ends of the beats in the measure, and
+end beams at the end of beats.
@end itemize
-@i{@strong{Modifying the grouping of beats}}
-
-If there are no beam-ending rules defined for the beam duration of a
-particular beam in the time signature in use, its beaming is
-controlled by three context properties: @code{measureLength},
-@code{beatLength} and @code{beatGrouping}. These properties may be
-set in the @code{Score}, @code{Staff} or @code{Voice} contexts to
-delimit their scope. The default values are set while processing
-@code{\time} commands, so any @code{\set} commands to modify their
-value must be placed after all @code{\time} commands.
-
-@warning{These three properties become effective for a particular
-beam @strong{only} if there are no beam-ending rules predefined for
-that beam's duration in the time signature in use, or if these
-beam-ending rules have all been reverted.}
-
-These determine the beaming as follows:
+The beam type is the duration of the shortest note in the beamed group.
+If no beam-ending rule is defined for a beam type, the rule for the
+smallest beam-type larger than the current beam is used.
-Beams may begin anywhere (unless a beam is already active). Beams
-end at a time determined by the values of @code{beatGrouping} and
-@code{beatLength}, as follows:
-
-@itemize
-
-@item If @code{beatGrouping} and @code{beatLength} are consistent
-with @code{measureLength}, @code{beatGrouping} is used to determine
-the end points of beams.
-
-@item If @code{beatGrouping} and @code{beatLength} are inconsistent
-with @code{measureLength}, @code{beatLength} is used to determine
-the end points of beams.
+@i{@strong{Modifying the grouping of beats}}
-@end itemize
+By default @code{baseMoment} is set by the @code{\time} command,
+normally to one over the denominator of the time signature.
+Any exceptions to this default
+can be found in @file{scm/@/time@/-signature@/-settings@/.scm}.
+Changing the default value of @code{baseMoment} for a given
+time signature is described in @ref{Time signature}.
-By default the @code{measureLength} and @code{beatLength} are
-derived from the time signature set by the @code{\time} command.
-The @code{measureLength} is set to be exactly the same length as
-the measure length given by the time signature, and the
-@code{beatLength} is set to be the same as one over the denominator
-of the time signature.
-
-The default value of @code{beatGrouping} is taken from a table in
-@file{scm/@/music@/-functions@/.scm}. To find this, see
-@rlearning{Other sources of information}. It defines the beat
-grouping for 3/8, 4/8, 5/8, 8/8, and all the common compound time
-signatures.
-
-Both @code{measureLength} and @code{beatLength} are @i{moments},
-units of musical duration. A quantity of type @i{moment} is
+@code{baseMoment} is a @i{moment},
+a unit of musical duration. A quantity of type @i{moment} is
created by the scheme function @code{ly:make-moment}. For more
information about this function, see @ref{Time administration}.
-@code{beatGrouping} is a list of integers giving the number of
-beats in each group.
-
-@snippets
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{grouping-beats.ly}
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{specifying-context-with-beatgrouping.ly}
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{using-beatlength-and-beatgrouping.ly}
-
-@funindex subdivideBeams
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{sub-dividing-beams.ly}
-
-@cindex measure groupings
-@cindex beats, grouping
-@cindex grouping beats
-@cindex measure sub-grouping
-
-@funindex autoBeamSettings
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{conducting-signs,-measure-grouping-signs.ly}
-
-
-@strong{@i{Modifying the beam end points}}
+Special (i.e., other than at the end of the beat) autobeam settings
+are stored in the
+@code{beamExceptions} property. Default values of @code{beamExceptions}
+are established by the @code{\time} command. Default values of
+@code{beamExceptions} for a time signature
+are determined in @file{scm/@/time@/-signature@/-settings@/.scm}.
+Entries in @code{beamExceptions} are indexed by rule type and beam type.
-Beam-ending rules are required when beams of different durations are
-to end at different points within the measure. For example, it may
-be desirable for eighth-note beams in 4/4 time to end only at the
-end of the measure or half-way through it, but for sixteenth-note
-beams to end at quarter note positions to avoid overly long beamed
-runs. The rules work as follows:
+Rule type should be @code{#'end} for beam ending.
-Automatic beams can start on any note but can end at only a few
-positions within the measure, namely at positions specified by the
-properties in @code{autoBeamSettings}. These properties consist of
-a list of rules defining where beams can end. The default
-@code{autoBeamSettings} rules are defined in
-@file{scm/@/auto@/-beam@/.scm}. To find this file, see
-@rlearning{Other sources of information}.
-
-In order to add a rule to the list, use
+The ending rules consist of a scheme alist
+(or list of pairs) that
+indicates the beam type and the grouping to be applied to
+beams containing notes with a shortest duration of that
+beam type.
@example
-#(override-auto-beam-setting
- '(beam-limit
- beam-numerator beam-denominator
- time-signature-numerator time-signature-denominator)
- moment-numerator moment-denominator [context])
+#'((beam-type1 . grouping-1)
+ (beam-type2 . grouping-2)
+ (beam-type3 . grouping-3))
@end example
-@noindent
-where
-
-@itemize
-
-@item @code{beam-limit} is the type of automatic beam limit
-defined. This can be either @code{begin} or @code{end} but
-only @code{end} is effective.
-
-@item @code{beam-numerator/beam-denominator} is the beam duration
-to which the rule is to apply. A beam is considered to have the
-duration of its shortest note. Set @code{beam-numerator} and
-@code{beam-denominator} to @code{'*'} to have this rule apply to beams
-of any duration.
+Beam type is a scheme pair indicating the duration
+of the beam, e.g., @code{(1 . 16)}.
-@item @code{time-signature-numerator/time-signature-denominator}
-specifies the time signature to which this rule should apply. If
-@code{time-signature-numerator} and @code{time-signature-denominator}
-are set to @code{'*'} this rule will apply in any time signature.
+Grouping is a scheme list indicating the grouping to be applied to
+the beam. The grouping is in units of the beam type.
-@item @code{moment-numerator/moment-denominator} is the position
-in the bar at which the beam should end.
+For reference, the default beaming rules are found in
+@file{scm/time-signature-settings.scm}.
-@funindex score-override-auto-beam-setting
-@funindex override-auto-beam-setting
-
-@item @code{context} is optional, and it specifies the context at which
-the change should be made. The default is @code{'Voice}.
-
-@code{#(score-override-auto-beam-setting '(A B C D) E F)} is equivalent to
-@code{#(override-auto-beam-setting '(A B C D) E F 'Score)}.
-
-@end itemize
-
-For example, if automatic beams should always end on the first quarter
-note, whatever the time signature or beam duration, use
-
-@lilypond[quote,verbatim,relative=2]
-a8 a a a a a a a
-#(override-auto-beam-setting '(end * * * *) 1 4)
-a8 a a a a a a a
-@end lilypond
+Alternate values for @code{beamExceptions}
+can be defined using the @code{\set} command.
-You can force the beam settings to take effect only on beams whose shortest
-note is a certain duration
+@warning{
+A @code{beamExceptions} value must be
+@emph{complete} exceptions list. That is, every exception that should
+be applied must be included in the setting.
+It is not possible to add, remove, or change only one of the exceptions.
+While this may seem cumbersome,
+it means that the current beaming settings need not be known
+in order to specify a new beaming pattern.}
-@lilypond[quote,verbatim,relative=2]
-\time 2/4
-% end 1/16 beams for all time signatures at the 1/16 moment
-#(override-auto-beam-setting '(end 1 16 * *) 1 16)
-a16 a a a a a a a |
-a32 a a a a16 a a a a a |
-% end 1/32 beams for all time signatures at the 1/16 moment
-#(override-auto-beam-setting '(end 1 32 * *) 1 16)
-a32 a a a a16 a a a a a |
+@lilypond[quote,relative=2,verbatim]
+\time 5/16
+c8^"beats" c16 c8 |
+\set beatStructure = #'(2 3)
+c8^"(2+3)" c16 c8
+\set beatStructure = #'(3 2)
+c8^"(3+2)" c16 c8
@end lilypond
-You can force the beam settings to take effect only in certain time
-signatures
+Beam setting changes can be limited to specific contexts. If no
+setting is included in a lower-level context, the setting of the
+enclosing context will apply.
-@lilypond[quote,verbatim,relative=2]
-\time 5/8
-% end beams of all durations in 5/8 time signature at the 2/8 moment
-#(override-auto-beam-setting '(end * * 5 8) 2 8)
-c8 c d d d
-\time 4/4
-e8 e f f e e d d
-\time 5/8
-c8 c d d d
+@lilypond[quote, verbatim,relative=1]
+\new Staff {
+ \time 7/8
+ \set Staff.beatStructure = #'(2 3 2)
+ <<
+ \new Voice = one {
+ \relative c'' {
+ a8 a a a a a a
+ }
+ }
+ \new Voice = two {
+ \relative c' {
+ \voiceTwo
+ \set Voice.beatStructure = #'(1 3 3)
+ f8 f f f f f f
+ }
+ }
+ >>
+}
@end lilypond
When multiple voices are used the @code{Staff} context must be
@lilypond[quote,verbatim,relative=2]
\time 7/8
% rhythm 3-1-1-2
-% Context not specified - does not work correctly
-#(override-auto-beam-setting '(end * * 7 8) 3 8)
-#(override-auto-beam-setting '(end * * 7 8) 4 8)
-#(override-auto-beam-setting '(end * * 7 8) 5 8)
+% Context Voice specified -- does not work correctly
+% Because of autogenerated voices, all beating will
+% be at baseMoment (1 . 8)
+\set beatStructure = #'(3 1 1 2)
<< {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
-% Works correctly with context specified
-#(override-auto-beam-setting '(end * * 7 8) 3 8 'Staff)
-#(override-auto-beam-setting '(end * * 7 8) 4 8 'Staff)
-#(override-auto-beam-setting '(end * * 7 8) 5 8 'Staff)
+% Works correctly with context Staff specified
+\set Staff.beatStructure = #'(3 1 1 2)
<< {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
@end lilypond
-@warning{If any unexpected beam behavior occurs, check the default
-automatic beam settings in @file{scm/@/auto@/-beam@/.scm} for
-possible interference, because the beam endings defined there will
-still apply in addition to your own.}
-
-@funindex revert-auto-beam-setting
-
-Any unwanted or conflicting default endings must be reverted for
-your time signature(s). Existing default or user-defined
-beam-ending rules are removed by using
-
-@example
-#(revert-auto-beam-setting
- '(beam-limit
- beam-numerator beam-denominator
- time-signature-numerator time-signature-denominator)
- moment-numerator moment-denominator [context])
-@end example
-
-@noindent
-@code{beam-limit}, @code{beam-numerator}, @code{beam-denominator},
-@code{time-signature-numerator}, @code{time-signature-denominator},
-@code{moment-numerator}, @code{moment-denominator} and @code{context}
-are the same as above.
+Beam settings can be set back to default behavior. This
+is accomplished by setting the time signature.
@lilypond[quote,verbatim,relative=2]
\time 4/4
-a16 a a a a a a a a a a a a a a a
-% undo a rule ending 1/16 beams in 4/4 time at 1/4 moment
-#(revert-auto-beam-setting '(end 1 16 4 4) 1 4)
-a16 a a a a a a a a a a a a a a a
+\repeat unfold 8 {a8}
+% eliminate beam exception that groups beats 1, 2 and 3, 4
+\set Timing.beamExceptions = #'()
+\repeat unfold 8 {a8}
+% go back to default behavior
+\time 4/4
+\repeat unfold 8 {a8}
@end lilypond
-The rule in a @code{revert-auto-beam-setting} statement must exactly
-match the original rule. That is, no wildcard expansion is taken into
-account.
-
-@lilypond[quote,verbatim,relative=2]
-\time 1/4
-#(override-auto-beam-setting '(end 1 16 1 4) 1 8)
-a16 a a a
-#(revert-auto-beam-setting '(end 1 16 * *) 1 8) % this won't revert it!
-a a a a
-#(revert-auto-beam-setting '(end 1 16 1 4) 1 8) % this will
-a a a a
-@end lilypond
@snippets
+@cindex beams, subdividing
+
@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{beam-grouping-in-7-8-time.ly}
+{subdividing-beams.ly}
+
+@cindex measure groupings
+@cindex beats, grouping
+@cindex grouping beats
+@cindex measure sub-grouping
@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{reverting-default-beam-endings.ly}
+{conducting-signs,-measure-grouping-signs.ly}
+
+@cindex beam, last in score
+@cindex beam, last in polyphonic voice
@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
{beam-endings-in-score-context.ly}
-@funindex \autoBeamOff
-@funindex autoBeamOff
-@funindex \autoBeamOn
-@funindex autoBeamOn
-@predefined
-@code{\autoBeamOff},
-@code{\autoBeamOn}.
-@endpredefined
+@seealso
+Installed files:
+@file{scm/beam-settings.scm}.
+Snippets:
+@rlsr{Rhythms}.
+
+Internals Reference:
+@rinternals{Auto_beam_engraver},
+@rinternals{Beam},
+@rinternals{BeamForbidEvent},
+@rinternals{beam-interface}.
-@cindex beam, last in score
-@cindex beam, last in polyphonic voice
@knownissues
The same holds for polyphonic voices, entered with @code{<<
@dots{} \\ @dots{} >>}. If a polyphonic voice ends while an
automatic beam is still accepting notes, it is not typeset.
-
-
-@seealso
-Snippets:
-@rlsr{Rhythms}.
-
+The workaround for these problems is to manually beam the last
+beam in the voice or score.
@node Manual beams
@unnumberedsubsubsec Manual beams
beaming algorithm. For example, the autobeamer will not put beams
over rests or bar lines, and in choral scores the beaming is
often set to follow the meter of the lyrics rather than the
-notes. Such beams can be specified manually by
-marking the begin and end point with @code{[} and @code{]}
+notes. Such beams can be specified manually by
+marking the begin and end point with @code{[} and @code{]}.
@lilypond[quote,relative=1,verbatim]
-{
- r4 r8[ g' a r8] r8 g[ | a] r8
-}
+r4 r8[ g' a r8] r8 g[ | a] r8
@end lilypond
+@cindex manual beams, direction shorthand for
+@cindex manual beams, grace notes
+
+Beaming direction can be set manually using direction indicators:
+
+@lilypond[quote,relative=2,verbatim]
+c8^[ d e] c,_[ d e f g]
+@end lilypond
@funindex \noBeam
@funindex noBeam
from being beamed:
@lilypond[quote,verbatim,relative=2]
-\time 2/4 c8 c\noBeam c c
+\time 2/4
+c8 c\noBeam c c
+@end lilypond
+
+Grace note beams and normal note beams can occur simultaneously.
+Unbeamed grace notes are not put into normal note beams.
+
+@lilypond[quote,verbatim,relative=2]
+c4 d8[
+\grace { e32[ d c d] }
+e8] e8[ e
+\grace { f16 }
+e8 e]
@end lilypond
@funindex stemLeftBeamCount
a8[ r16
\set stemLeftBeamCount = #2
\set stemRightBeamCount = #1
-f
+f16
\set stemLeftBeamCount = #1
-g a]
+g16 a]
@end lilypond
+@predefined
+@code{\noBeam}.
+@endpredefined
+
+
@snippets
@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
{flat-flags-and-beam-nibs.ly}
+
+@seealso
+Notation Reference:
+@ref{Direction and placement},
+@ref{Grace notes}.
+
+Snippets:
+@rlsr{Rhythms}.
+
+Internals Reference:
+@rinternals{Beam},
+@rinternals{BeamEvent},
+@rinternals{Beam_engraver},
+@rinternals{beam-interface},
+@rinternals{Stem_engraver}.
+
+
@node Feathered beams
@unnumberedsubsubsec Feathered beams
The spacing in the printed output represents the
note durations only approximately, but the MIDI output is exact.
-@knownissues
-
-The @code{\featherDurations} command only works with very short
-music snippets, and when numbers in the fraction are small.
+@predefined
+@code{\featherDurations}.
+@endpredefined
@seealso
Snippets:
@rlsr{Rhythms}.
+@knownissues
+
+The @code{\featherDurations} command only works with very short
+music snippets, and when numbers in the fraction are small.
+
+
@node Bars
@subsection Bars
Line breaks are also permitted at manually inserted bar lines
even within incomplete measures. To allow a line break without
-printing a bar line, use
+printing a bar line, use the following:
@example
\bar ""
@cindex measure lines, manual
This and other special bar lines may be inserted manually at any
-point. When they coincide with the end of a measure they replace the
-simple bar line which would have been inserted there automatically.
-When they do not coincide with the end of a measure the specified bar
-line is inserted at that point in the printed output. Such insertions
-do not affect the calculation and placement of subsequent automatic
-bar lines.
-
-Two types of simple bar lines and five types of double bar lines are available
-for manual insertion:
+point. When they coincide with the end of a measure they replace
+the simple bar line which would have been inserted there
+automatically. When they do not coincide with the end of a measure
+the specified bar line is inserted at that point in the printed
+output.
+
+Note that manual bar lines are purely visual. They do not affect
+any of the properties that a normal bar line would affect, such as
+measure numbers, accidentals, line breaks, etc. They do not affect
+the calculation and placement of subsequent automatic bar lines.
+When a manual bar line is placed where a normal bar line already
+exists, the effects of the original bar line are not altered.
+
+Two types of simple bar lines and five types of double bar lines are
+available for manual insertion:
@lilypond[quote,relative=1,verbatim]
-f1 \bar "|" f \bar "." g \bar "||" a \bar ".|" b \bar ".|." c \bar "|.|" d \bar "|." e
+f1 \bar "|"
+f1 \bar "."
+g1 \bar "||"
+a1 \bar ".|"
+b1 \bar ".|."
+c1 \bar "|.|"
+d1 \bar "|."
+e1
@end lilypond
@noindent
together with dotted and dashed bar lines:
@lilypond[quote,relative=1,verbatim]
-f1 \bar ":" g \bar "dashed" a
+f1 \bar ":"
+g1 \bar "dashed"
+a1
@end lilypond
@noindent
and five types of repeat bar line:
@lilypond[quote,relative=1,verbatim]
-f1 \bar "|:" g \bar ":|:" a \bar ":|.|:" b \bar ":|.:" c \bar ":|" d
+f1 \bar "|:"
+g1 \bar ":|:"
+a1 \bar ":|.|:"
+b1 \bar ":|.:"
+c1 \bar ":|"
+d1
@end lilypond
Additionally, a bar line can be printed as a simple tick:
@lilypond[quote,relative=1,verbatim]
f1 \bar "'"
@end lilypond
-However, as such ticks are typically used in Gregorian chant, it is preferable
-to use @code{\divisioMinima} there instead, described in the section
-@ref{Divisiones} in Gregorian chant.
+However, as such ticks are typically used in Gregorian chant, it is
+preferable to use @code{\divisioMinima} there instead, described in
+the section @ref{Divisiones} in Gregorian chant.
+
+@cindex segno
+For in-line segno signs, there are three types of bar lines which
+differ in their behavior at line breaks:
+
+@lilypond[quote,relative=2,verbatim]
+c4 c c c
+\bar "S"
+c4 c c c \break
+\bar "S"
+c4 c c c
+\bar "|S"
+c4 c c c \break
+\bar "|S"
+c4 c c c
+\bar "S|"
+c4 c c c \break
+\bar "S|"
+c1
+@end lilypond
@cindex repeats
the next line.
@lilypond[quote,relative=2,verbatim]
-\override Score.RehearsalMark #'padding = #3
-c c c c
+c4 c c c
\bar "||:"
-c c c c \break
+c4 c c c \break
\bar "||:"
-c c c c
+c4 c c c
+@end lilypond
+
+For combinations of repeats with the segno sign, there are six different
+variations:
+
+@lilypond[quote,relative=2,verbatim]
+c4 c c c
+\bar ":|S"
+c4 c c c \break
+\bar ":|S"
+c4 c c c
+\bar ":|S."
+c4 c c c \break
+\bar ":|S."
+c4 c c c
+\bar "S|:"
+c4 c c c \break
+\bar "S|:"
+c4 c c c
+\bar ".S|:"
+c4 c c c \break
+\bar ".S|:"
+c4 c c c
+\bar ":|S|:"
+c4 c c c \break
+\bar ":|S|:"
+c4 c c c
+\bar ":|S.|:"
+c4 c c c \break
+\bar ":|S.|:"
+c1
@end lilypond
+
In scores with many staves, a @code{\bar} command in one staff is
automatically applied to all staves. The resulting bar lines are
connected between different staves of a @code{StaffGroup},
@code{PianoStaff}, or @code{GrandStaff}.
-@lilypond[quote,fragment,verbatim]
+@lilypond[quote,relative=1,verbatim]
<<
\new StaffGroup <<
\new Staff {
- e'4 d'
+ e4 d
\bar "||"
- f' e'
+ f4 e
}
\new Staff { \clef bass c4 g e g }
>>
The command @code{\bar }@var{bartype} is a shortcut for
@code{\set Timing.whichBar = }@var{bartype}. A bar line is
-created whenever the @code{whichBar} property is
-set.
+created whenever the @code{whichBar} property is set.
The default bar type used for automatically inserted bar lines is
@code{"|"}. This may be changed at any time
Snippets:
@rlsr{Rhythms}.
-Internals Reference: @rinternals{BarLine} (created at
-@rinternals{Staff} level), @rinternals{SpanBar} (across
-staves), @rinternals{Timing_translator} (for Timing
-properties).
+Internals Reference:
+@rinternals{BarLine} (created at @code{Staff} level),
+@rinternals{SpanBar} (across staves),
+@rinternals{Timing_translator} (for Timing properties).
@node Bar numbers
@code{currentBarNumber} property, which is normally updated
automatically for every measure. It may also be set manually:
-@lilypond[verbatim,quote,fragment,relative=1]
+@lilypond[verbatim,quote,relative=1]
c1 c c c
\break
\set Score.currentBarNumber = #50
Snippets:
@rlsr{Rhythms}.
-Internals Reference: @rinternals{BarNumber}.
+Internals Reference:
+@rinternals{BarNumber},
+@rinternals{Bar_number_engraver}.
@cindex bar number collision
@knownissues
-Bar numbers may collide with the top of the
-@rinternals{StaffGroup} bracket, if there is one. To solve
-this, the @code{padding} property of @rinternals{BarNumber} can
-be used to position the number correctly.
-
+Bar numbers may collide with the top of the @code{StaffGroup} bracket,
+if there is one. To solve this, the @code{padding} property of
+@code{BarNumber} can be used to position the number correctly. See
+@rinternals{StaffGroup} and @rinternals{BarNumber} for more.
@node Bar and bar number checks
\time 3/4 c2 e4 | g2 |
@end example
-Bar checks can also be used in lyrics, for example
+Bar checks can also be used in lyrics:
@example
\lyricmode @{
@funindex \mark
@funindex mark
-To print a rehearsal mark, use the @code{\mark} command
+To print a rehearsal mark, use the @code{\mark} command.
+
+@lilypond[quote,verbatim,relative=2]
+c1 \mark \default
+c1 \mark \default
+c1 \mark \default
+c1 \mark \default
+@end lilypond
+
+@noindent
+The mark is incremented automatically if you use @code{\mark
+\default}, but you can also use an integer argument to set the
+mark manually. The value to use is stored in the property
+@code{rehearsalMark}.
@lilypond[quote,verbatim,relative=2]
c1 \mark \default
@noindent
The letter@tie{}@q{I} is skipped in accordance with engraving
-traditions. If you wish to include the letter @q{I}, then use
+traditions. If you wish to include the letter @q{I}, then use one
+of the following commands, depending on which style of rehearsal mark
+you want (letters only, letters in a hollow box, or letters in a
+hollow circle).
@example
\set Score.markFormatter = #format-mark-alphabet
+\set Score.markFormatter = #format-mark-box-alphabet
+\set Score.markFormatter = #format-mark-circle-alphabet
@end example
-The mark is incremented automatically if you use @code{\mark
-\default}, but you can also use an integer argument to set the
-mark manually. The value to use is stored in the property
-@code{rehearsalMark}.
+@lilypond[quote,verbatim,relative=2]
+\set Score.markFormatter = #format-mark-box-alphabet
+c1 \mark \default
+c1 \mark \default
+c1 \mark #8
+c1 \mark \default
+c1 \mark \default
+@end lilypond
@cindex rehearsal mark format
@cindex rehearsal mark style
@code{format-mark-circle-barnumbers} to get bar numbers instead of
incremented numbers or letters.
-Other styles of rehearsal mark can be specified manually
+Other styles of rehearsal mark can be specified manually:
@example
\mark "A1"
@end example
@noindent
-@code{Score.markFormatter} does not affect marks specified in this
-manner. However, it is possible to apply a @code{\markup} to the
+Note that @code{Score.markFormatter} does not affect marks specified
+in this manner. However, it is possible to apply a @code{\markup} to the
string.
@example
printed with @code{\musicglyph}.
For common tweaks to the positioning of rehearsal marks, see
-@ref{Formatting text}.
+@ref{Formatting text}. For more precise control, see
+@code{break-alignable-interface} in @ref{Aligning objects}.
@seealso
Notation Reference:
@ref{The Feta font},
-@ref{Formatting text}.
+@ref{Formatting text},
+@ref{Aligning objects}.
Installed Files:
@file{scm/@/translation@/-functions@/.scm} contains
-the definition of @code{format-mark-numbers} and
+the definitions of @code{format-mark-numbers} and
@code{format-mark-letters}. They can be used as inspiration for
other formatting functions.
Snippets:
@rlsr{Rhythms}.
-Internals Reference: @rinternals{RehearsalMark}.
+Internals Reference:
+@rinternals{MarkEvent},
+@rinternals{Mark_engraver},
+@rinternals{RehearsalMark}.
@node Special rhythmic concerns
@funindex \grace
@funindex grace
-Grace notes are ornaments that are written out. Grace notes
+Grace notes are ornaments that are written out. Grace notes
are printed in a smaller font and take up no logical time
in a measure.
@end lilypond
LilyPond also supports two special types of grace notes, the
-@emph{acciaccatura}--an unmeasured grace note indicated by a slurred
-small note with a slashed stem--and the @emph{appoggiatura}, which
+@emph{acciaccatura} -- an unmeasured grace note indicated by a slurred
+small note with a slashed stem -- and the @emph{appoggiatura}, which
takes a fixed fraction of the main note and appears in small print
without a slash.
notes for every eighth grace note
@lilypond[quote,relative=2,verbatim]
-<< \new Staff { e2 \grace { c16[ d e f] } e2 }
- \new Staff { c2 \grace { g8[ b] } c2 } >>
+<<
+ \new Staff { e2 \grace { c16[ d e f] } e2 }
+ \new Staff { c2 \grace { g8[ b] } c2 }
+>>
@end lilypond
@cindex grace notes, following
@end lilypond
The space between the main note and the grace note may also be
-specified using spacers. The following example places the grace
+specified using spacers. The following example places the grace
note after a space lasting 7/8 of the main note.
@lilypond[quote,verbatim,relative=2]
\new Voice {
- << { d1^\trill_( }
- { s2 s4. \grace { c16[ d] } } >>
+ <<
+ { d1^\trill_( }
+ { s2 s4. \grace { c16[ d] } }
+ >>
c1)
}
@end lilypond
typesetting settings, for example, to produce smaller type, and
set directions. Hence, when introducing layout tweaks to
override the special settings, they should be placed inside
-the grace expression. The overrides should also be reverted
-inside the grace expression. Here, the grace note's default stem
+the grace expression. The overrides should also be reverted
+inside the grace expression. Here, the grace note's default stem
direction is overridden and then reverted.
@lilypond[quote,verbatim,relative=2]
@rglos{acciaccatura},
@rglos{appoggiatura}.
-Installed Files: @file{ly/@/grace@/-init@/.ly}.
+Notation Reference:
+@ref{Manual beams}.
-Snippets: @rlsr{Rhythms}.
+Installed Files:
+@file{ly/@/grace@/-init@/.ly}.
-Internals Reference: @rinternals{GraceMusic}.
+Snippets:
+@rlsr{Rhythms}.
+
+Internals Reference:
+@rinternals{GraceMusic},
+@rinternals{Grace_beam_engraver},
+@rinternals{Grace_engraver},
+@rinternals{Grace_spacing_engraver}.
@knownissues
Time is administered by the @code{Timing_translator}, which by
default is to be found in the @code{Score} context. An alias,
@code{Timing}, is added to the context in which the
-@code{Timing_translator} is placed.
+@code{Timing_translator} is placed. To ensure that the
+@code{Timing} alias is available, you may need to explicitly
+instantiate the containing context (such as @code{Voice} or
+@code{Staff}).
The following properties of @code{Timing} are used
to keep track of timing within the score.
advanced by 1/8 to 5/8, shortening that bar by 1/8.
The next bar line then falls at 9/8 rather than 5/4.
-@lilypond[quote,verbatim,relative=1]
-\set Score.measureLength = #(ly:make-moment 5 4)
-c1 c4
-c1 c4
-c4 c4
-\set Score.measurePosition = #(ly:make-moment 5 8)
-b4 b4 b8
-c4 c1
+@lilypond[quote,verbatim]
+\new Voice \relative c' {
+ \set Timing.measureLength = #(ly:make-moment 5 4)
+ c1 c4 |
+ c1 c4 |
+ c4 c
+ \set Timing.measurePosition = #(ly:make-moment 5 8)
+ b4 b b8 |
+ c4 c1 |
+}
@end lilypond
@noindent
@seealso
-This manual: @ref{Bar numbers}, @ref{Unmetered music}
+Notation Reference:
+@ref{Bar numbers},
+@ref{Unmetered music}.
Snippets:
@rlsr{Rhythms}.
-Internals Reference: @rinternals{Timing_translator},
-@rinternals{Score}
+Internals Reference:
+@rinternals{Timing_translator},
+@rinternals{Score}.
projects / lilypond.git / blobdiff