Guide, node Updating translation committishes..
@end ignore
-@c \version "2.13.36"
+@c \version "2.15.18"
@node Rhythms
@section Rhythms
@snippets
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{changing-the-number-of-augmentation-dots-per-note.ly}
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
+{alternative-breve-note.ly}
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
+{changing-the-number-of-augmentation-dots-per-note.ly}
@seealso
Music Glossary:
@rinternals{Dots},
@rinternals{DotColumn}.
-
@knownissues
-
@c Deliberately duplicated in Durations and Rests. -gp
There is no fundamental limit to rest durations (both in terms of
longest and shortest), but the number of glyphs is limited:
@funindex tupletNumberFormatFunction
@funindex tupletSpannerDuration
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{entering-several-tuplets-using-only-one--times-command.ly}
@cindex Tuplet number changes
@funindex TupletNumber
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{changing-the-tuplet-number.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{non-default-tuplet-numbers.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{controlling-tuplet-bracket-visibility.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{permitting-line-breaks-within-beamed-tuplets.ly}
-
@seealso
Music Glossary:
@rglos{triplet},
@rinternals{TupletNumber},
@rinternals{TimeScaledMusic}.
-
@cindex grace notes within tuplet brackets
@knownissues
One application of this command is in polymetric
notation, see @ref{Polymetric notation}.
-
@seealso
Notation Reference:
@ref{Tuplets},
c2 ~ c
@end lilypond
-Dash pattern definitions for ties have the same structure as
-dash pattern definitions for slurs.
-For more information about complex dash patterns,
-see the snippets under @ref{Slurs}.
+Dash pattern definitions for ties have the same structure as dash
+pattern definitions for slurs. For more information about complex dash
+patterns, see @ref{Slurs}.
+
+Override @var{whiteout} and @var{layer} layout properties for ties that
+collide with other objects in a staff.
+
+@lilypond[verbatim,quote,ragged-right,relative=2]
+\override Tie #'layer = #-2
+\override Staff.TimeSignature #'layer = #-1
+\override Staff.KeySignature #'layer = #-1
+\override Staff.TimeSignature #'whiteout = ##t
+\override Staff.KeySignature #'whiteout = ##t
+b2 b~
+\time 3/4
+\key a \major
+b r4
+@end lilypond
@predefined
@code{\tieUp},
@code{\tieSolid}.
@endpredefined
-
@snippets
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{using-ties-with-arpeggios.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{engraving-ties-manually.ly}
-
@seealso
Music Glossary:
@rglos{tie},
@ref{Automatic note splitting}.
Snippets:
+@rlsr{Expressive marks},
@rlsr{Rhythms}.
Internals Reference:
@rinternals{TieColumn},
@rinternals{Tie}.
-
@knownissues
-Switching staves when a tie is active will not produce a slanted
-tie.
-
-Changing clefs or octavations during a tie is not really
-well-defined. In these cases, a slur may be preferable.
+Switching staves when a tie is active will not produce a slanted tie.
+Changing clefs or ottavations during a tie is not really well-defined.
+In these cases, a slur may be preferable.
@node Writing rests
@snippets
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{rest-styles.ly}
-
@seealso
Music Glossary:
@rglos{breve},
Internals Reference:
@rinternals{Rest}.
-
@knownissues
-
@c Deliberately duplicated in Durations and Rests. -gp
There is no fundamental limit to rest durations (both in terms of
longest and shortest), but the number of glyphs is limited: there
\skip 1 \skip1 \skip 1
@end lilypond
-
@seealso
Learning Manual:
@rlearning{Visibility and color of objects}.
@cindex rest, church
@cindex kirchenpausen
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{changing-form-of-multi-measure-rests.ly}
@cindex multi-measure rests, positioning
@cindex positioning multi-measure rests
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{positioning-multi-measure-rests.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{multi-measure-rest-markup.ly}
-
@seealso
Music Glossary:
@rglos{multi-measure rest}.
@rinternals{MultiMeasureRestNumber},
@rinternals{MultiMeasureRestText}.
-
@cindex fingerings and multi-measure rests
@cindex multi-measure rests and fingerings
Multi-measure rests do not take part in rest collisions.
+
@node Displaying rhythms
@subsection Displaying rhythms
@lilypond[quote,verbatim]
\score {
- \relative c' {
- \overrideTimeSignatureSettings
- #'Score % context
- #'(4 . 4) % timeSignatureFraction
- #'(1 . 4) % baseMomentFraction
- #'(3 1) % beatStructure
- #'() % beamExceptions
- \time 4/4
- \repeat unfold 8 { c8 } |
+ \new Staff {
+ \relative c' {
+ \overrideTimeSignatureSettings
+ #'(4 . 4) % timeSignatureFraction
+ #'(1 . 4) % baseMomentFraction
+ #'(3 1) % beatStructure
+ #'() % beamExceptions
+ \time 4/4
+ \repeat unfold 8 { c8 } |
+ }
}
}
@end lilypond
-@code{\overrideTimeSignatureSettings} takes five arguments:
+@code{\overrideTimeSignatureSettings} takes four arguments:
@enumerate
-@item
-@code{@var{context}}, a Scheme symbol that describes the context
-to which the default setting will apply.
@item
@code{@var{timeSignatureFraction}}, a Scheme pair describing the
described in @ref{Setting automatic beam behavior}.
@end enumerate
+The context containing @code{\overrideTimeSignatureSettings} must
+be instantiated before the @code{\overrideTimeSignatureSettings}
+call is executed. That means it must either be explicitly
+instantiated or there must be music in the context before the
+@code{\overrideTimeSignatureSettings} call:
+
+@lilypond[quote,verbatim]
+\score {
+ \relative c' {
+ % This call will fail because the context isn't yet instantiated
+ \overrideTimeSignatureSettings
+ #'(4 . 4) % timeSignatureFraction
+ #'(1 . 4) % baseMomentFraction
+ #'(3 1) % beatStructure
+ #'() % beamExceptions
+ \time 4/4
+ c8^\markup {"Beamed (2 2)"}
+ \repeat unfold 7 { c8 } |
+ % This call will succeed
+ \overrideTimeSignatureSettings
+ #'(4 . 4) % timeSignatureFraction
+ #'(1 . 4) % baseMomentFraction
+ #'(3 1) % beatStructure
+ #'() % beamExceptions
+ \time 4/4
+ c8^\markup {"Beamed (3 1)"}
+ \repeat unfold 7 { c8 } |
+ }
+}
+@end lilypond
+
+
@cindex time signature properties, restoring default values
@cindex restoring default properties for time signatures
@funindex \revertTimeSignatureSettings
\relative c' {
\repeat unfold 8 { c8 } |
\overrideTimeSignatureSettings
- #'Score % context
- #'(4 . 4) % timeSignatureFraction
- #'(1 . 4) % baseMomentFraction
- #'(3 1) % beatStructure
- #'((end . (((1 . 8) . (3 1))))) % beamExceptions
+ #'(4 . 4) % timeSignatureFraction
+ #'(1 . 4) % baseMomentFraction
+ #'(3 1) % beatStructure
+ #'() % beamExceptions
\time 4/4
\repeat unfold 8 { c8 } |
- \revertTimeSignatureSettings #'Score #'(4 . 4)
+ \revertTimeSignatureSettings #'(4 . 4)
\time 4/4
\repeat unfold 8 { c8 } |
}
}
@end lilypond
+Different values of default time signature properties can be established
+for different staves by moving the @code{Timing_translator} and the
+@code{Default_bar_line_engraver} from the @code{Score} context to the
+@code{Staff} context.
+
+@lilypond[quote, verbatim]
+\score {
+ \new StaffGroup <<
+ \new Staff {
+ \overrideTimeSignatureSettings
+ #'(4 . 4) % timeSignatureFraction
+ #'(1 . 4) % baseMomentFraction
+ #'(3 1) % beatStructure
+ #'() % beamExceptions
+ \time 4/4
+ \repeat unfold 8 {c''8}
+ }
+ \new Staff {
+ \overrideTimeSignatureSettings
+ #'(4 . 4) % timeSignatureFraction
+ #'(1 . 4) % baseMomentFraction
+ #'(1 3) % beatStructure
+ #'() % beamExceptions
+ \time 4/4
+ \repeat unfold 8 {c''8}
+ }
+ >>
+ \layout {
+ \context {
+ \Score
+ \remove "Timing_translator"
+ \remove "Default_bar_line_engraver"
+ }
+ \context {
+ \Staff
+ \consists "Timing_translator"
+ \consists "Default_bar_line_engraver"
+ }
+ }
+}
+@end lilypond
+
@predefined
@code{\numericTimeSignature},
@code{\defaultTimeSignature}.
@snippets
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{changing-the-time-signature-without-affecting-the-beaming.ly}
-
-@cindex compound time signatures
-@cindex time signature, compound
-
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
-{compound-time-signatures.ly}
-
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{time-signature-printing-only-the-numerator-as-a-number-instead-of-the-fraction.ly}
-
@seealso
Music Glossary:
@rglos{time signature}
@rinternals{TimeSignature},
@rinternals{Timing_translator}.
+
@node Metronome marks
@unnumberedsubsubsec Metronome marks
@lilypond[verbatim,quote,relative=1]
\tempo 4 = 40 ~ 46
-c4. ees8
-fis g aes c,
-b1
+c4. e8 a4 g
+b,2 d4 r
@end lilypond
Tempo indications with text can be used instead:
@snippets
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{printing-metronome-and-rehearsal-marks-below-the-staff.ly}
@c perhaps also an example of how to move it horizontally?
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{changing-the-tempo-without-a-metronome-mark.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{creating-metronome-marks-in-markup-mode.ly}
For more details, see @ref{Formatting text}.
-
@seealso
Music Glossary:
@rglos{metronome},
@cindex upbeat
@cindex partial measure
@cindex measure, partial
+@cindex measure, pickup
@cindex pickup measure
-@cindex measure, change length
@funindex measurePosition
@funindex \partial
@funindex partial
-Partial or pick-up measures, such as an anacrusis or upbeat, are
-entered using the @code{\partial} command, with the syntax
+Partial or pick-up measures, such as an @emph{anacrusis} or an
+@emph{upbeat}, are entered using the @code{\partial} command,
@example
\partial @var{duration}
@end example
@noindent
-where @code{@var{duration}} is the rhythmic length of the
-remaining interval of the current measure before the start of the
-next.
+where @code{@var{duration}} is the @emph{remaining} length of the
+partial measure @emph{before} the start of the next full measure.
-@lilypond[quote,verbatim,relative=2]
-\partial 4 e4 |
-a2. c,4 |
+@lilypond[quote,verbatim,relative=1]
+\time 3/4
+\partial 8
+e8 | a4 c8 b c4 |
@end lilypond
-The partial measure can be any duration less than the full measure:
+The @var{duration} can be any value less than a full measure:
-@lilypond[quote,verbatim,relative=2]
-\partial 8*3 c8 d e |
-a2. c,4 |
+@lilypond[quote,verbatim,relative=1]
+\time 3/4
+\partial 4.
+r4 e8 | a4 c8 b c4 |
@end lilypond
-Internally, @code{\partial @var{duration}} is translated into:
+The @code{\partial @var{duration}} can also be written as;
@example
\set Timing.measurePosition -@var{duration}
@end example
-For example, @code{\partial 8*3} becomes:
+So @code{\partial 8} becomes:
-@example
-\set Timing.measurePosition = #(ly:make-moment -3 8)
-@end example
+@lilypond[quote,verbatim,relative=1]
+\time 3/4
+\set Timing.measurePosition = #(ly:make-moment -1 8)
+e8 | a4 c8 b c4 |
+@end lilypond
The property @code{measurePosition} contains a rational number
indicating how much of the measure has passed at this point. Note
that this is set to a negative number by the @code{\partial} command:
-i.e., @code{\partial 4} is internally translated to @code{-4}, meaning
-@qq{there is a quarter note left in the measure.}
+i.e., @code{\partial 4} is internally translated to @w{@code{-4}},
+meaning @qq{there is a quarter note left in the measure.}
@seealso
Music Glossary:
@rinternals{Timing_translator}.
@knownissues
+The @code{\partial} command should be used only at the beginning of a
+piece. If you use it after the beginning, warnings or problems may
+occur, so use @code{\set Timing.measurePosition} instead.
+
+@lilypond[quote,verbatim,relative=1]
+\time 6/8
+\partial 8
+e8 | a4 c8 b[ c b] |
+\set Timing.measurePosition = #(ly:make-moment -1 4)
+r8 e,8 | a4 c8 b[ c b] |
+@end lilypond
-The @code{\partial} command is intended to be used only at the
-beginning of a piece. If you use it after the beginning, some
-odd warnings or effects may occur, in this case use
-@code{\set Timing.measurePosition} instead.
@node Unmetered music
@unnumberedsubsubsec Unmetered music
d4 e d c
@end lilypond
-@cindex beaming in cadenzas
-@cindex beaming in unmetered music
-@cindex cadenza, beaming in
-@cindex unmetered music, beaming in
+@cindex beams, in cadenzas
+@cindex beams, in unmetered music
+@cindex cadenza, with beams
+@cindex unmetered music, with beams
Automatic beaming is disabled by @code{\cadenzaOn} and enabled
by @code{\cadenzaOff}. Therefore, all beaming in cadenzas
@code{\cadenzaOff}.
@endpredefined
-
@seealso
Music Glossary:
@rglos{cadenza}.
Snippets:
@rlsr{Rhythms}.
-
@cindex cadenza line breaks
@cindex cadenza page breaks
@cindex unmetered music, line breaks
@cindex page breaks in unmetered music
@knownissues
-
LilyPond will insert line breaks and page breaks only at a
bar line. Unless the unmetered music ends before the end of the
staff line, you will need to insert invisible bar lines with
@funindex \times
@funindex times
-Polymetric notation is supported, either explicitly or by modifying
-the visible time signature symbol and scaling the note durations.
+Polymetric notation is supported explicitly or by manually modifying the
+visible time signature symbol and/or scaling note durations.
-@strong{@i{Staves with different time signatures, equal measure lengths}}
+@subsubheading Different time signatures with equal-length measures
-This notation can be created by setting a common time signature
-for each staff but replacing the symbol manually by setting
-@code{timeSignatureFraction} to the desired fraction and scaling
-the printed durations in each staff to the common time
-signature; see @ref{Time signature}. The scaling is done with
-@code{\scaleDurations}, which is used in a similar way to
-@code{\times}, but does not create a tuplet bracket; see
-@ref{Scaling durations}.
+Set a common time signature for each staff, and set the
+@code{timeSignatureFraction} to the desired fraction. Then use the
+@code{\scaleDurations} function to scale the durations of the notes in
+each staff to the common time signature.
-@cindex beaming in polymetric music
-@cindex beaming in polymetric meter
+@cindex beams, with polymetric meters
+@cindex polymetric meters, with beams
-In this example, music with the time signatures of 3/4, 9/8, and
-10/8 are used in parallel. In the second staff, shown durations
-are multiplied by 2/3, as 2/3 * 9/8 = 3/4, and in the third
-staff, shown durations are multiplied by 3/5, as 3/5 * 10/8 = 3/4.
-It will often be necessary to insert beams manually, as the
-duration scaling affects the autobeaming rules.
+In the following example, music with the time signatures of 3/4, 9/8 and
+10/8 are used in parallel. In the second staff, shown durations are
+multiplied by 2/3 (because 2/3 * 9/8 = 3/4) and in the third staff, the
+shown durations are multiplied by 3/5 (because 3/5 * 10/8 = 3/4). It
+may be necessary to insert beams manually, as the duration scaling will
+affect the autobeaming rules.
@lilypond[quote,verbatim]
\relative c' <<
\new Staff {
\time 3/4
c4 c c |
- c c c |
+ c4 c c |
}
\new Staff {
\time 3/4
\set Staff.timeSignatureFraction = #'(9 . 8)
\scaleDurations #'(2 . 3)
- \repeat unfold 6 { c8[ c c] }
+ \repeat unfold 6 { c8[ c c] }
}
\new Staff {
\time 3/4
\scaleDurations #'(3 . 5) {
\repeat unfold 2 { c8[ c c] }
\repeat unfold 2 { c8[ c] } |
- c4. c4. \times 2/3 { c8[ c c] } c4
+ c4. c \times 2/3 { c8[ c c] } c4
}
}
>>
@end lilypond
-@strong{@i{Staves with different time signatures, unequal bar lengths}}
+@subsubheading Different time signatures with unequal-length measures
Each staff can be given its own independent time signature by
moving the @code{Timing_translator} and the
>>
@end lilypond
-@snippets
+@funindex \compoundMeter
+@cindex compound time signatures
+@cindex time signature, compound
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
-{compound-time-signatures.ly}
+@subsubheading Compound time signatures
+These are created using the @code{\compoundMeter} function. The syntax
+for this is:
+
+@example
+\compoundMeter #'@code{(list of lists)}
+@end example
+
+The simplest construction is a single list, where the @emph{last} number
+indicates the bottom number of the time signature and those that come
+before it, the top numbers.
+
+@lilypond[quote,verbatim]
+\relative c' {
+ \compoundMeter #'((2 2 2 8))
+ \repeat unfold 6 c8 \repeat unfold 12 c16
+}
+@end lilypond
+
+More complex meters can be constructed using additional lists. Also,
+automatic beaming settings will be adjusted depending on the values.
+
+@lilypond[quote,verbatim]
+\relative c' {
+ \compoundMeter #'((1 4) (3 8))
+ \repeat unfold 5 c8 \repeat unfold 10 c16
+}
+
+\relative c' {
+ \compoundMeter #'((1 2 3 8) (3 4))
+ \repeat unfold 12 c8
+}
+@end lilypond
@seealso
Music Glossary:
@rglos{meter}.
Notation Reference:
+@ref{Automatic beams},
+@ref{Manual beams},
@ref{Time signature},
@ref{Scaling durations}.
@rinternals{Default_bar_line_engraver},
@rinternals{Staff}.
-
@knownissues
+When using different time signatures in parallel, notes at the same
+moment will be placed at the same horizontal location. However, the bar
+lines in the different staves will cause the note spacing to be less
+regular in each of the individual staves than would be normal without
+the different time signatures.
-When using different time signatures in parallel, notes
-at the same moment will be placed at the same horizontal
-location. However, the bar lines in the different staves
-will cause the note spacing to be less regular in each of the
-individual staves than would be normal without the different
-time signatures.
@node Automatic note splitting
@unnumberedsubsubsec Automatic note splitting
@cindex notes, splitting
@cindex splitting notes
+@cindex rests, splitting
+@cindex splitting rests
@funindex Note_heads_engraver
@funindex Completion_heads_engraver
+@funindex Completion_rest_engraver
-Long notes which overrun bar lines can be converted automatically
-to tied notes. This is done by replacing the
-@code{Note_heads_engraver} with the
-@code{Completion_heads_engraver}. In the following
-example, notes crossing the bar lines are split and tied.
+Long notes which overrun bar lines can be converted automatically to
+tied notes. This is done by replacing the @code{Note_heads_engraver}
+with the @code{Completion_heads_engraver}. Similarly, long rests which
+overrun bar lines are split automatically by replacing the
+@code{Rest_engraver} with the @code{Completion_rest_engraver}. In the
+following example, notes and rests crossing the bar lines are split,
+notes are also tied.
@lilypond[quote,verbatim,relative=1]
\new Voice \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
+ \remove "Rest_engraver"
+ \consists "Completion_rest_engraver"
}
-{ c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 }
+{ c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 r1*2 }
@end lilypond
-This engraver splits all running notes at the bar line, and
-inserts ties. One of its uses is to debug complex scores: if the
-measures are not entirely filled, then the ties show exactly how
+These engravers split all running notes and rests at the bar line, and
+inserts ties for notes. One of its uses is to debug complex scores: if
+the measures are not entirely filled, then the ties show exactly how
much each measure is off.
-
@seealso
Music Glossary:
@rglos{tie}
Internals Reference:
@rinternals{Note_heads_engraver},
@rinternals{Completion_heads_engraver},
+@rinternals{Rest_engraver},
+@rinternals{Completion_rest_engraver},
@rinternals{Forbid_line_break_engraver}.
-
@knownissues
-
Not all durations (especially those containing tuplets) can be
represented exactly with normal notes and dots, but the
@code{Completion_heads_engraver} will not insert tuplets.
@snippets
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{guitar-strum-rhythms.ly}
-
@seealso
Snippets:
@rlsr{Rhythms}.
@cindex beams, manual
@cindex manual beams
-@cindex beams, setting rules for
-@cindex beams, custom rules for
+@cindex beams, customizing rules
@funindex \autoBeamOn
@funindex autoBeamOn
c16 c8
@end lilypond
-@cindex melismata, beams
-@cindex beams and melismata
+@cindex melismata, with beams
+@cindex beams, with melismata
@warning{If beams are used to indicate melismata in songs, then
automatic beaming should be switched off with @code{\autoBeamOff}
-and the beams indicated manually.}
-
-@warning{Using @code{@bs{}partcombine} with @code{@bs{}autoBeamOff} can
-produce unintended results. See the snippet below for more information.}
+and the beams indicated manually. Using @code{@bs{}partcombine} with
+@code{@bs{}autoBeamOff} can produce unintended results. See the
+snippets for more information.}
Beaming patterns that differ from the automatic defaults can be
created; see @ref{Setting automatic beam behavior}.
-
@predefined
@code{\autoBeamOff},
@code{\autoBeamOn}.
@endpredefined
-
-@snippets
-
-
-@cindex line breaks and beams
-@cindex beams and line breaks
-
+@cindex beams, line breaks
+@cindex line breaks, beams
+@cindex beams, with knee gap
+@cindex knee gap, with beams
@funindex breakable
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@snippets
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{beams-across-line-breaks.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{changing-beam-knee-gap.ly}
-@cindex \partcombine and \autoBeamOff
-@cindex \autoBeamOff and \partcombine
-
+@cindex beams, \partcombine with \autoBeamOff
+@cindex voices, \partcombine with \autoBeamOff
-@lilypondfile [verbatim, lilyquote, ragged-right, texidoc, doctitle]
+@lilypondfile [verbatim, quote, ragged-right, texidoc, doctitle]
{partcombine-and-autobeamoff.ly}
-
@seealso
Notation Reference:
@ref{Manual beams},
@rinternals{beam-interface},
@rinternals{unbreakable-spanner-interface}.
-
@knownissues
-
-Beams can collide with note heads and accidentals in other voices.
+The properties of a beam are determined at the @emph{start} of its
+construction and any additional beam-property changes that occur before
+the beam has been completed will not take effect until the @emph{next},
+new beam starts.
@node Setting automatic beam behavior
@unnumberedsubsubsec Setting automatic beam behavior
-
-@cindex automatic beams, tuning
-@cindex tuning automatic beaming
-@cindex automatic beam generation
-@cindex autobeam
-@cindex lyrics and beaming
+@cindex beams, with lyrics
+@cindex lyrics, with beams
@funindex autoBeaming
@funindex baseMoment
of beaming-rules.
At this time the only available value of rule-type is
-@code{#'end} for beam ending.
+@code{'end} for beam ending.
Beaming-rules is a scheme alist (or list of pairs) that indicates the
beam type and the grouping to be applied to beams containing notes with
\repeat unfold 6 { a8 }
@end lilypond
-These default automatic beaming settings for a time signature
+The default automatic beaming settings for a time signature
are determined in @file{scm/time-signature-settings.scm}.
-The automatic beaming settings for a time signature can be changed
-as described in @ref{Time signature}.
+Changing the default automatic beaming settings
+for a time signature is described in @ref{Time signature}.
-Most automatic beaming settings for a time signature contain an
+Many automatic beaming settings for a time signature contain an
entry for @code{beamExceptions}. For example, 4/4 time tries to
beam the measure in two if there are only eighth notes. The
@code{beamExceptions} rule can override the @code{beatStructure} setting
\repeat unfold 8 {c8}
@end lilypond
-In a similar fashion, eighth notes in 3/4 time are beamed as a full
-measure by default. To beam eighth notes in 3/4 time on the beat,
-reset @code{beamExceptions}.
+In traditional engraving, eighth notes can have special beaming rules.
+A measure consisting of only eighth notes can be beamed in one. This rule is
+controlled by the context property @code{beamWholeMeasure}:
@lilypond[quote,verbatim,relative=2]
\time 3/4
-% by default we beam in (3) due to beamExceptions
-\repeat unfold 6 {a8} |
-% This will beam (1 1 1) due to beatLength
-\set Timing.beamExceptions = #'()
-\repeat unfold 6 {a8}
+% By default we beam in one
+\repeat unfold 6 { a8 }
+% We can avoid beaming in one
+\set Timing.beamWholeMeasure = ##f
+\repeat unfold 6 { a8 }
+@end lilypond
+
+In some engraving from the Romantic and Classical periods,
+a half-measure of eighth notes can be beamed
+together even though this violates the general rule (see Gould, p. 153).
+This behavior is controlled by the context property @code{beamHalfMeasure}:
+
+@lilypond[quote,verbatim,relative=2]
+\time 3/4
+% By default we avoid half-measure beams
+r4. a8 a a |
+% We can allow half-measure beams
+\set Timing.beamHalfMeasure = ##t
+r4. a8 a a |
@end lilypond
@i{@strong{How automatic beaming works}}
@end itemize
-In the rules above, the beam-type is the duration of the
+In the rules above, the @emph{beam-type} is the duration of the
shortest note in the beamed group.
-For reference, the default beaming rules are found in
+The default beaming rules can be found in
@file{scm/time-signature-settings.scm}.
@snippets
@cindex beams, subdividing
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{subdividing-beams.ly}
+@cindex beamlets, orienting
+
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
+{strict-beat-beaming.ly}
+
@cindex measure groupings
@cindex beats, grouping
@cindex grouping beats
@cindex measure sub-grouping
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{conducting-signs,-measure-grouping-signs.ly}
-@cindex beam, last in score
-@cindex beam, last in polyphonic voice
+@cindex beam, endings in a score
+@cindex beam, endings with multiple voices
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{beam-endings-in-score-context.ly}
-
@seealso
Installed Files:
@file{scm/beam-settings.scm}.
@rinternals{BeamForbidEvent},
@rinternals{beam-interface}.
-
@knownissues
If a score ends while an automatic beam has not been ended and is
still accepting notes, this last beam will not be typeset at all.
The workaround for these problems is to manually beam the last
beam in the voice or score.
+By default, the @code{Timing} translator is aliased to the
+@code{Score} context. This means that setting the time signature
+in one staff will affect the beaming of the other staves as well.
+Thus, a time signature setting in a later staff will reset custom
+beaming that was set in an earlier staff.
+One way to avoid this problem is to set the time signature
+in only one staff.
+
+@lilypond[quote,verbatim,relative=2]
+<<
+ \new Staff {
+ \time 3/4
+ \set Timing.baseMoment = #(ly:make-moment 1 8)
+ \set Timing.beatStructure = #'(1 5)
+ \repeat unfold 6 { a8 }
+ }
+ \new Staff {
+ \repeat unfold 6 { a8 }
+ }
+>>
+@end lilypond
+
+The default beam settings for the time signature can also be changed, so
+that the desired beaming will always be used. Changes in automatic
+beaming settings for a time signature are described in
+@ref{Time signature}.
+
+@lilypond[quote,verbatim,relative=2]
+<<
+ \new Staff {
+ \overrideTimeSignatureSettings
+ #'(3 . 4) % timeSignatureFraction
+ #'(1 . 8) % baseMomentFraction
+ #'(1 5) % beatStructure
+ #'() % beamExceptions
+ \time 3/4
+ \repeat unfold 6 { a8 }
+ }
+ \new Staff {
+ \time 3/4
+ \repeat unfold 6 { a8 }
+ }
+>>
+@end lilypond
+
+
@node Manual beams
@unnumberedsubsubsec Manual beams
@snippets
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{flat-flags-and-beam-nibs.ly}
-
@seealso
Notation Reference:
@ref{Direction and placement},
direction to the @code{Beam} property @code{grow-direction}.
If the placement of the notes and the sound in the MIDI output is to
-reflect the ritardando or accelerando indicated by the feathered beam
-the notes must be grouped as a music expression delimited by braces
-and preceded by a @code{featherDurations} command which specifies
+reflect the @emph{ritardando} or @emph{accelerando} indicated by the
+feathered beam the notes must be grouped as a music expression delimited
+by braces and preceded by a @code{featherDurations} command which specifies
the ratio between the durations of the first and last notes in the
group.
The spacing in the printed output represents the
note durations only approximately, but the MIDI output is exact.
-
@predefined
@code{\featherDurations}.
@endpredefined
Snippets:
@rlsr{Rhythms}.
-
@knownissues
-
The @code{\featherDurations} command only works with very short
music snippets, and when numbers in the fraction are small.
@node Bars
@subsection Bars
-
@menu
* Bar lines::
* Bar numbers::
@code{"|"}. This may be changed at any time with
@samp{\set Timing.defaultBarType = @var{bartype}}.
-
@seealso
Notation Reference:
@ref{Line breaking},
c1 | c | c | c
@end lilypond
-
@snippets
-
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{printing-the-bar-number-for-the-first-measure.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{printing-bar-numbers-at-regular-intervals.ly}
@cindex measure number, format
@cindex bar number, format
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{printing-bar-numbers-inside-boxes-or-circles.ly}
+@cindex bar numbers, with letters
+@cindex bar numbers, with repeats
+
+@lilypondfile[verbatim,quote,texidoc,doctitle]
+{alternative-bar-numbering.ly}
+
@cindex bar number alignment
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{aligning-bar-numbers.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{removing-bar-numbers-from-a-score.ly}
-
@seealso
Snippets:
@rlsr{Rhythms}.
@rinternals{BarNumber},
@rinternals{Bar_number_engraver}.
-
@cindex bar number collision
@cindex collision, bar number
will print a warning if the @code{currentBarNumber} is not 123
when it is processed.
-
@seealso
Snippets:
@rlsr{Rhythms}.
@ref{Formatting text}. For more precise control, see
@code{break-alignable-interface} in @ref{Aligning objects}.
+The file @file{scm/translation-functions.scm} contains
+the definitions of @code{format-mark-numbers} and
+@code{format-mark-letters}. They can be used as inspiration for
+other formatting functions.
@seealso
Notation Reference:
@ref{Aligning objects}.
Installed Files:
-@file{scm/translation-functions.scm} contains
-the definitions of @code{format-mark-numbers} and
-@code{format-mark-letters}. They can be used as inspiration for
-other formatting functions.
+@file{scm/translation-functions.scm}.
Snippets:
@rlsr{Rhythms}.
@cindex acciaccatura
@funindex \grace
-@funindex grace
+@funindex \slashedGrace
+@funindex \acciaccatura
+@funindex \appoggiatura
-Grace notes are ornaments that are written out. Grace notes
-are printed in a smaller font and take up no logical time
-in a measure.
+Grace notes are musical ornaments, printed in a smaller font, that take
+up no additional logical time in a measure.
@lilypond[quote,relative=2,verbatim]
-c4 \grace c16 c4
-\grace { c16[ d16] } c2
+c4 \grace b16 a4(
+\grace { b16[ c16] } a2)
@end lilypond
-LilyPond also supports two special types of grace notes, the
+There are three other types of grace notes possible; the
@emph{acciaccatura} -- an unmeasured grace note indicated by a slurred
-small note with a slashed stem -- and the @emph{appoggiatura}, which
-takes a fixed fraction of the main note and appears in small print
-without a slash.
+note with a slashed stem -- and the @emph{appoggiatura}, which takes a
+fixed fraction of the main note it is attached to and prints without the
+slash. It is also possible to write a grace note with a slashed stem,
+like the @emph{acciaccatura} but without the slur, so as to place it
+between notes that are slurred themselves, using the
+@code{\slashedGrace} function.
@lilypond[quote,relative=2,verbatim]
-\grace c8 b4
\acciaccatura d8 c4
\appoggiatura e8 d4
-\acciaccatura { g16[ f] } e4
+\acciaccatura { g16[ f] } e2
+\slashedGrace a,8 g4
+\slashedGrace b16 a4(
+\slashedGrace b8 a2)
@end lilypond
-The placement of grace notes is synchronized between different
-staves. In the following example, there are two sixteenth grace
-notes for every eighth grace note
+The placement of grace notes is synchronized between different staves.
+In the following example, there are two sixteenth grace notes for every
+eighth grace note
@lilypond[quote,relative=2,verbatim]
<<
@snippets
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{using-grace-note-slashes-with-normal-heads.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{tweaking-grace-layout-within-music.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{redefining-grace-note-global-defaults.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{positioning-grace-notes-with-floating-space.ly}
-
@seealso
Music Glossary:
@rglos{grace notes},
@rglos{appoggiatura}.
Notation Reference:
+@ref{Scaling durations},
@ref{Manual beams}.
Installed Files:
@knownissues
-
@cindex acciaccatura, multi-note
@cindex multi-note acciaccatura
@cindex grace-note synchronization
>>
@end lilypond
-Grace sections should only be used within sequential music
-expressions. Nesting or juxtaposing grace sections is not
-supported, and might produce crashes or other errors.
+The use of grace notes within voice contexts confuses the way the voice
+is typeset. This can be overcome by inserting a rest or note between the
+voice command and the grace note.
+
+@lilypond[quote,verbatim]
+accMusic = {
+ \acciaccatura { f8 } e8 r8 \acciaccatura { f8 } e8 r4
+}
+
+\new Staff {
+ <<
+ \new Voice {
+ \relative c'' {
+ r8 r8 \voiceOne \accMusic \oneVoice r8 |
+ r8 \voiceOne r8 \accMusic \oneVoice r8 |
+ }
+ }
+ \new Voice {
+ \relative c' {
+ s8 s8 \voiceTwo \accMusic \oneVoice s8 |
+ s8 \voiceTwo r8 \accMusic \oneVoice s8 |
+ }
+ }
+ >>
+}
+@end lilypond
+
+Grace sections should only be used within sequential music expressions.
+Nesting or juxtaposing grace sections is not supported, and might
+produce crashes or other errors.
+
+Each grace note in MIDI output has a length of 1/4 of its actual
+duration. If the combined length of the grace notes is greater than the
+length of the preceding note a @qq{@code{Going back in MIDI time}}
+error will be generated. Either make the grace notes shorter in
+duration, for example:
+
+@example
+\acciaccatura @{ c'8[ d' e' f' g'] @}
+@end example
+
+becomes:
+
+@example
+\acciaccatura @{ c'16[ d' e' f' g'] @}
+@end example
+
+Or explicitly change the musical duration:
+
+@example
+\acciaccatura @{ \scaleDurations #' (1 . 2) @{ c'8[ d' e' f' g'] @} @}
+@end example
+
+See @ref{Scaling durations}.
+
@node Aligning to cadenzas
@unnumberedsubsubsec Aligning to cadenzas
\MyCadenza c'1
}
\new Staff {
- #(ly:export (mmrest-of-length MyCadenza))
+ $(mmrest-of-length MyCadenza)
c'1
- #(ly:export (skip-of-length MyCadenza))
+ $(skip-of-length MyCadenza)
c'1
}
>>
@end lilypond
-
@seealso
Music Glossary:
@rglos{cadenza}.
@code{ly:make-moment 7 16} is the duration of seven sixteenths
notes.
-
@seealso
Notation Reference:
@ref{Bar numbers},
Internals Reference:
@rinternals{Timing_translator},
@rinternals{Score}.
-
projects / lilypond.git / blobdiff