Guide, node Updating translation committishes..
@end ignore
-@c \version "2.14.0"
+@c \version "2.17.11"
@node Repeats
@section Repeats
c1
@end lilypond
-A single repeat with more than one alternate ending:
+Multiple repeats with one alternate ending:
@lilypond[verbatim,quote,relative=2]
\repeat volta 4 { c4 d e f | }
@cindex repeat with upbeat
@cindex upbeat in a repeat
-@cindex anacrucis in a repeat
-@cindex repeat with anacrucis
+@cindex anacrusis in a repeat
+@cindex repeat with anacrusis
@cindex repeat with pickup
@cindex pickup in a repeat
@funindex \partial
\alternative {
{
f2 d |
- \set Timing.measureLength = #(ly:make-moment 3 4)
+ \set Timing.measureLength = #(ly:make-moment 3/4)
g4 g g % optional bar check is allowed here
}
{
- \set Timing.measureLength = #(ly:make-moment 4 4)
+ \set Timing.measureLength = #(ly:make-moment 4/4)
a2 a |
}
}
The @code{measureLength} property is described in @ref{Time
administration}.
-@funindex \inStaffSegno
-
-The @code{\inStaffSegno} command can be used to place the segno
-symbol in cooperation with the @code{\repeat volta} command.
-Alternative bar line symbols can be set in a Score context by
-overriding the properties @code{segnoType},
-@code{startRepeatSegnoType}, @code{endRepeatSegnoType} or
-@code{doubleRepeatSegnoType} as required.
-
-@lilypond[verbatim,quote,relative=1]
-e1
-\repeat volta 2 {
- \inStaffSegno
- f2 g a b
-}
-c1_"D.S." \bar "|."
-@end lilypond
-
@cindex repeats, with ties
@cindex alternative endings, with ties
@cindex ties, in repeats
}
@end lilypond
+@funindex \inStaffSegno
+@cindex repeats, with segno
+@cindex segno, with repeats
+
+The @code{\inStaffSegno} command can be used to generate a composite
+bar line incorporating the segno symbol with the appropriate repeat
+bar line when used with the @code{\repeat volta} command. The
+correct type of repeat bar line, viz. start repeat, end repeat or
+double repeat, is selected automatically. Note that the
+corresponding @qq{D.S.} mark must be added manually.
+
+Away from a repeat:
+
+@lilypond[verbatim,quote,relative=1]
+e1
+\inStaffSegno
+f2 g a b
+c1_"D.S." \bar "|."
+@end lilypond
+
+At the start of a repeat:
+
+@lilypond[verbatim,quote,relative=1]
+e1
+\repeat volta 2 {
+ \inStaffSegno % start repeat
+ f2 g a b
+}
+c1_"D.S." \bar "|."
+@end lilypond
+
+At the end of a repeat:
+
+@lilypond[verbatim,quote,relative=1]
+e1
+\repeat volta 2 {
+ f2 g a b
+ \inStaffSegno % end repeat
+}
+f2 g a b
+c1_"D.S." \bar "|."
+@end lilypond
+
+Between two repeats:
+
+@lilypond[verbatim,quote,relative=1]
+e1
+\repeat volta 2 {
+ f2 g a b
+}
+\inStaffSegno % double repeat
+\repeat volta 2 {
+ f2 g a b
+}
+c1_"D.S." \bar "|."
+@end lilypond
+
+Alternative bar line symbols can be obtained by setting (in the Score
+context) the properties @code{segnoType}, @code{startRepeatSegnoType},
+@code{endRepeatSegnoType} or @code{doubleRepeatSegnoType} to the
+required bar line type. The alternative bar line types must be
+selected from the pre-defined types or types previously defined
+with the @code{\defineBarLine} command (see @ref{Bar lines}).
+
+@lilypond[verbatim,quote,relative=1]
+\defineBarLine ":|.S[" #'(":|." "S[" "")
+\defineBarLine "]" #'("]" "" "")
+e1
+\repeat volta 2 {
+ f2 g a b
+ \once \set Score.endRepeatSegnoType = ":|.S["
+ \inStaffSegno
+}
+f2 g \bar "]" a b
+c1_"D.S." \bar "|."
+@end lilypond
+
@snippets
@lilypondfile[verbatim,quote,texidoc,doctitle]
{shortening-volta-brackets.ly}
Notation Reference:
@ref{Bar lines},
@ref{Modifying context plug-ins},
+@ref{Modifying ties and slurs},
@ref{Time administration}.
Snippets:
@cindex repeat and measure number
@cindex timing information and repeats
@cindex measure number and repeats
-@cindex repeat and slur
-@cindex slur and repeat
+@cindex repeats and slur
+@cindex slur and repeats
+@cindex glissandi and repeats
+@cindex repeats and glissandi
Slurs that span from a @code{\repeat} block into an
-@code{\alternative} block will only work for the first alternate
-ending. Also, slurs cannot wrap around from the end of one
+@code{\alternative} block will only work for the first alternative
+ending. The visual appearance of a continuing slur in other
+alternative blocks may be simulated with @code{\repeatTie} if the
+slur extends into only one note in the alternative block, although
+this method does not work in @code{TabStaff}. Other methods which
+may be tailored to indicate continuing slurs over several notes in
+alternative blocks, and which also work in @code{TabStaff} contexts,
+are shown in @ref{Modifying ties and slurs}.
+
+Also, slurs cannot wrap around from the end of one
alternative back to the beginning of the repeat.
+Glissandi that span from a @code{\repeat} block into an
+@code{\alternative} block will only work for the first alternative
+ending. The visual appearance of a continuing glissando in other
+alternative blocks may be indicated by coding a glissando starting
+on a hidden grace note. For an example, see
+@qq{Extending glissandi across repeats} under Selected Snippets
+in @ref{Glissando}.
+
If a repeat that begins with an incomplete measure has an
@code{\alternative} block that contains modifications to the
@code{measureLength} property, using @code{\unfoldRepeats} will
@table @code
@item start-repeat
-Print a @code{|:} bar line.
+Print a @code{.|:} bar line.
@lilypond[verbatim,quote,relative=2]
c1
at the beginning of a piece.
@item end-repeat
-Print a @code{:|} bar line:
+Print a @code{:|.} bar line:
@lilypond[verbatim,quote,relative=2]
c1
c1
@end lilypond
-@item (volta @var{number}) ... (volta #f)
+@item (volta @var{number}) @dots{} (volta #f)
Create a new volta with the specified number. The volta bracket must
be explicitly terminated, or it will not be printed.
@lilypond[verbatim,quote,relative=2]
\repeat percent 4 { c8. <d f>16 }
-\repeat percent 2 { \times 2/3 { r8 c d } e4 }
+\repeat percent 2 { \tuplet 3/2 { r8 c d } e4 }
@end lilypond
@snippets
projects / lilypond.git / blobdiff