Guide, node Updating translation committishes..
@end ignore
-@c \version "2.12.0"
+@c \version "2.17.6"
@node Chord notation
describe chords. More information on different input modes can be
found at @ref{Input modes}.
-@lilypond[verbatim,quote,ragged-right,relative=1]
+@lilypond[verbatim,quote,ragged-right]
\chordmode { c1 g a g c }
@end lilypond
\chordmode { f2 g }
@end lilypond
-
@seealso
Music Glossary:
@rglos{chord}.
Snippets:
@rlsr{Chords}.
-
@knownissues
-
Predefined shorthands for articulations and ornaments cannot be used
on notes in chord mode, see @ref{Articulations and ornamentations}.
<c e g>2 <g' b d>
@end lilypond
+@noindent
To avoid this behavior, explicitly create the @code{Staff} context:
@lilypond[verbatim,quote,ragged-right,relative=1]
}
@end lilypond
+
@node Common chords
@unnumberedsubsubsec Common chords
Major triads are entered by including the root and an
optional duration:
-@lilypond[verbatim,quote,relative=1,ragged-right]
+@lilypond[verbatim,quote,ragged-right]
\chordmode { c2 f4 g }
@end lilypond
Minor, augmented, and diminished triads are entered by placing
@code{:} and a quality modifier string after the duration:
-@lilypond[verbatim,quote,ragged-right,relative=1]
+@lilypond[verbatim,quote,ragged-right]
\chordmode { c2:m f4:aug g:dim }
@end lilypond
Seventh chords can be created:
-@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
+@lilypond[quote,ragged-right,verbatim]
\chordmode { c1:7 c:m7 c:maj7 c:dim7 c:aug7 }
@end lilypond
@funindex maj
@funindex m
-The table belows shows the actions of the quality modifiers on
+The table below shows the actions of the quality modifiers on
triads and seventh chords. The default seventh step added to
chords is a minor or flatted seventh, which makes the dominant
seventh the basic seventh chord. All alterations are relative to
@tab
@lilypond[line-width=4\cm, noragged-right]
\chordmode {
- \override Staff.TimeSignature #'stencil = ##f
+ \override Staff.TimeSignature.stencil = ##f
c1
}
@end lilypond
@tab
@lilypond[line-width=4\cm, noragged-right]
\chordmode {
- \override Staff.TimeSignature #'stencil = ##f
+ \override Staff.TimeSignature.stencil = ##f
c1:m c:m7
}
@end lilypond
@tab
@lilypond[line-width=4\cm, noragged-right]
\chordmode {
- \override Staff.TimeSignature #'stencil = ##f
+ \override Staff.TimeSignature.stencil = ##f
c1:dim c:dim7
}
@end lilypond
@tab
@lilypond[line-width=4\cm, noragged-right]
\chordmode {
- \override Staff.TimeSignature #'stencil = ##f
+ \override Staff.TimeSignature.stencil = ##f
c1:aug
}
@end lilypond
@tab
@lilypond[line-width=4\cm, noragged-right]
\chordmode {
- \override Staff.TimeSignature #'stencil = ##f
+ \override Staff.TimeSignature.stencil = ##f
c1:maj c:maj7
}
@end lilypond
@end multitable
-
@seealso
Notation Reference:
@ref{Common chord modifiers},
Snippets:
@rlsr{Chords}.
-
@knownissues
Only one quality modifier should be used per chord, typically on the
highest step present in the chord. Chords with more than quality
added. The largest possible value for the extent is 13. Any
larger value is interpreted as 13.
-@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
+@lilypond[quote,ragged-right,verbatim]
\chordmode {
c1:2 c:3 c:4 c:5
c1:6 c:7 c:8 c:9
unaltered 13, the 11 is removed from a @code{:13} chord (unless it
is added explicitly).
-@lilypond[quote,ragged-right,fragment,verbatim,relative=1]
+@lilypond[quote,ragged-right,verbatim]
\chordmode {
c1:13 c:13.11 c:m13
}
step added to a chord is the minor or flatted seventh, rather than
the major seventh.
-@lilypond[quote,verbatim,fragment,relative=1]
+@lilypond[quote,verbatim]
\chordmode {
c1:5.6 c:3.7.8 c:3.6.13
}
Added steps can be as high as desired.
-@lilypond[quote,verbatim,fragment,relative=1]
+@lilypond[quote,verbatim]
\chordmode {
c4:5.15 c:5.20 c:5.25 c:5.30
}
sign to the number. To alter a step that is automatically included
as part of the basic chord structure, add it as an altered step.
-@lilypond[quote,verbatim,fragment,relative=1]
+@lilypond[quote,verbatim]
\chordmode {
c1:7+ c:5+.3- c:3-.5-.7-
}
removed are separated by @code{.} following the
initial @code{^}.
-@lilypond[quote,verbatim,fragment,relative=1]
+@lilypond[quote,verbatim]
\chordmode {
c1^3 c:7^5 c:9^3 c:9^3.5 c:13.11^3.7
}
chord. @code{sus} is equivalent to @code{^3}; @code{sus4} is
equivalent to @code{.4^3}.
-@lilypond[quote,ragged-right,fragment,verbatim]
+@lilypond[quote,ragged-right,verbatim]
\chordmode {
c1:sus c:sus2 c:sus4 c:5.4^3
}
chord) and added bass notes can be specified by appending
@code{/}@var{pitch} to the chord.
-@lilypond[quote,ragged-right,fragment,verbatim, relative=2]
+@lilypond[quote,ragged-right,verbatim]
\chordmode {
c1 c/g c/f
}
A bass note that is part of the chord can be added, instead of
moved as part of an inversion, by using @code{/+}@var{pitch}.
-@lilypond[quote,ragged-right,fragment,verbatim]
+@lilypond[quote,ragged-right,verbatim]
\chordmode {
c1 c/g c/+g
}
standard chords are shown in
@ref{Common chord modifiers}.
-
@seealso
Notation Reference:
@ref{Common chord modifiers}.
Snippets:
@rlsr{Chords}.
-
@knownissues
-
Each step can only be present in a chord once. The following
simply produces the augmented chord, since @code{5+} is
interpreted last.
-@lilypond[quote,ragged-right,verbatim,fragment]
+@lilypond[quote,ragged-right,verbatim]
\chordmode { c1:5.5-.5+ }
@end lilypond
note. The first inversion requires changing the root of
the chord.
-@lilypond[quote,ragged-right,verbatim,fragment]
+@lilypond[quote,ragged-right,verbatim]
\chordmode {
c'1: c':/g e:6-3-^5 e:m6-^5
}
@end lilypond
+
@node Displaying chords
@subsection Displaying chords
Chord names are printed in the @code{ChordNames} context:
-@lilypond[verbatim,quote,relative=1,ragged-right]
+@lilypond[verbatim,quote,ragged-right]
\new ChordNames {
\chordmode {
c2 f4. g8
g1
c1
}
- \new Score \chordmode {
+ \chordmode {
c1
r1
g1
@code{\chords @{ ... @}} is a shortcut notation for
@code{\new ChordNames @{ \chordmode @{ ... @} @}}.
-@lilypond[verbatim,quote,ragged-right, relative=1]
+@lilypond[verbatim,quote,ragged-right]
\chords {
c2 f4.:m g8:maj7
}
@end lilypond
-@lilypond[verbatim,quote,ragged-right, relative=1]
+@lilypond[verbatim,quote,ragged-right]
\new ChordNames {
\chordmode {
c2 f4.:m g8:maj7
@cindex chords, suppressing repeated
@funindex chordChanges
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{showing-chords-at-changes.ly}
-@c @lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@c @lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
@c {adding-bar-lines-to-chordnames-context.ly}
-@lilypondfile[verbatim,lilyquote,ragged-right,texidoc,doctitle]
+@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{simple-lead-sheet.ly}
-
@seealso
Music Glossary:
@rglos{chord}.
@rinternals{Volta_engraver},
@rinternals{Bar_engraver}.
-
@knownissues
-
Chords containing inversions or altered bass notes are not named
properly if entered using simultaneous music.
There is no unique system for naming chords. Different musical
traditions use different names for the same set of chords. There
-are also different symbols displayed for a given chord name. The
+are also different symbols displayed for a given chord name. The
names and symbols displayed for chord names are customizable.
@cindex jazz chords
system can be modified as described below. An alternate jazz
chord system has been developed using these modifications.
The Ignatzek and alternate
-Jazz notation are shown on the chart in @ref{Chord
-name chart}.
+Jazz notation are shown on the chart in @ref{Chord name chart}.
@c TODO -- Change this so we don't have a non-verbatim example.
@c Make short example in docs, then move longer example to
In addition to the different naming systems, different note names
are used for the root in different languages. The predefined
-variables @code{\germanChords}, @code{\semiGermanChords},
+commands @code{\germanChords}, @code{\semiGermanChords},
@code{\italianChords} and @code{\frenchChords} set these variables.
The effect is demonstrated here:
without any @var{m} suffix. This can be obtained by setting the
@code{chordNameLowercaseMinor} property:
-@lilypond[verbatim,quote,ragged-right, relative=1]
+@lilypond[verbatim,quote,ragged-right]
\chords {
\set chordNameLowercaseMinor = ##t
c2 d:m e:m f
options are @code{whiteTriangleMarkup} and
@code{blackTriangleMarkup}.
+@funindex additionalPitchPrefix
+
+@item additionalPitchPrefix
+
+When the chord name contains additional pitches, they can optionally
+be prefixed with some text. The default is no prefix, in order to
+avoid too much visual clutter, but for small numbers of additional
+pitches this can be visually effective.
+
+@lilypond[verbatim,quote,ragged-right]
+\new ChordNames {
+ <c e g d'> % add9
+ \set additionalPitchPrefix = #"add"
+ <c e g d'> % add9
+}
+@end lilypond
+
@funindex chordNoteNamer
@item chordNoteNamer
@item chordNameSeparator
-Different parts of a chord name are normally separated by a slash.
-By setting @code{chordNameSeparator}, you can use any desired markup
-for a separator.
+Different parts of a chord name are normally separated by a small
+amount of horizontal space. By setting @code{chordNameSeparator}, you
+can use any desired markup for a separator. This does not affect the
+separator between a chord and its bass note; to customize that, use
+@code{slashChordSeparator}.
+
+@lilypond[verbatim,quote,ragged-right]
+\chords {
+ c4:7.9- c:7.9-/g
+ \set chordNameSeparator = \markup { "/" }
+ \break
+ c4:7.9- c:7.9-/g
+}
+@end lilypond
+
+@funindex slashChordSeparator
+
+@item slashChordSeparator
+
+Chords can be played over a bass note other than the conventional root
+of the chord. These are known as ``inversions'' or ``slash chords'',
+because the default way of notating them is with a forward slash
+between the main chord and the bass note. Therefore the value of
+@code{slashChordSeparator} defaults to a forward slash, but you can
+change it to any markup you choose.
+
+@lilypond[verbatim,quote,ragged-right]
+\chords {
+ c4:7.9- c:7.9-/g
+ \set slashChordSeparator = \markup { " over " }
+ \break
+ c4:7.9- c:7.9-/g
+}
+@end lilypond
@funindex chordNameExceptions
The second item is a markup that will follow the @code{chordRootNamer}
output to create the chord name.
+@funindex minorChordModifier
+
+@item minorChordModifier
+
+Minor chords are often denoted via a @q{m} suffix to the right of the
+root of the chord. However some idioms prefer other suffices, such as
+a minus sign.
+
+@lilypond[verbatim,quote,ragged-right]
+\chords {
+ c4:min f:min7
+ \set minorChordModifier = \markup { "-" }
+ \break
+ c4:min f:min7
+}
+@end lilypond
+
@funindex chordPrefixSpacer
+
@item chordPrefixSpacer
-The @q{m} for minor chords is usually printed immediately to the
-right of the root of the chord. A spacer can be placed between
-the root and @q{m} by setting @code{chordPrefixSpacer}.
-The spacer is not used when the root is altered.
+The modifier for minor chords as determined by
+@code{minorChordModifier} is usually printed immediately to the right
+of the root of the chord. A spacer can be placed between the root and
+the modifier by setting @code{chordPrefixSpacer}. The spacer is not
+used when the root is altered.
@end table
@snippets
@cindex exceptions, chord names.
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{chord-name-exceptions.ly}
@c TODO - tweak snippet to use \blackTriangleMarkup as well
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{chord-name-major7.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{adding-bar-lines-to-chordnames-context.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{volta-below-chords.ly}
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{changing-chord-separator.ly}
-
@seealso
Notation Reference:
@ref{Chord name chart},
@ref{Common chord modifiers}.
+Essay on automated music engraving:
+@ressay{Literature list}.
+
Installed Files:
-@file{scm/@/chords@/-ignatzek@/.scm},
-@file{scm/@/chord@/-entry@/.scm},
-@file{ly/@/chord@/-modifier@/-init@/.ly}.
+@file{scm/chords-ignatzek.scm},
+@file{scm/chord-entry.scm},
+@file{ly/chord-modifier-init.ly}.
Snippets:
@rlsr{Chords}.
-@c Internals Reference:
-@c @r internals{}.
-
-
@knownissues
-
Chord names are determined from both the pitches that are present
in the chord and the information on the chord structure that may
have been entered in @code{\chordmode}. If the simultaneous pitches
@node Figured bass
@subsection Figured bass
-@lilypondfile[quote]{figured-bass-headword.ly}
+@c Line width hack because of instrument names
+@lilypondfile[quote,staffsize=18,line-width=14.5\cm]{figured-bass-headword.ly}
Figured bass notation can be displayed.
LilyPond has support for figured bass, also called thorough bass
or basso continuo:
-@lilypond[quote,ragged-right,verbatim,fragment]
+@lilypond[quote,ragged-right,verbatim]
<<
\new Voice { \clef bass dis4 c d ais g fis}
\new FiguredBass {
@code{baseline-skip}.
@end ignore
-
@seealso
Music Glossary:
@rglos{figured bass}.
In figure mode, a group of bass figures is delimited by
@code{<} and @code{>}. The duration is entered after the @code{>}.
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
\new FiguredBass {
\figuremode {
<6 4>2
Accidentals (including naturals) can be added to figures:
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
\figures {
<7! 6+ 4-> <5++> <3-->
}
Augmented and diminished steps can be indicated:
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
\figures {
<6\+ 5/> <7/>
}
A backward slash through a figure (typically used for raised
sixth steps) can be created:
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
\figures {
<6> <6\\>
}
Vertical spaces and brackets can be included in figures:
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
\figures {
<[12 _!] 8 [6 4]>
}
Any text markup can be inserted as a figure:
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
\figures {
<\markup { \tiny \number 6 \super (1) } 5>
}
Continuation lines can be used to indicate repeated figures:
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
<<
{
\clef bass
In this case, the extender lines replace existing figures,
unless the continuation lines have been explicitly terminated.
-@lilypond[verbatim,quote,ragged-right,fragment]
+@lilypond[verbatim,quote,ragged-right]
<<
\figures {
\bassFigureExtendersOn
@snippets
-@lilypondfile[verbatim,lilyquote,texidoc,doctitle]
+@lilypondfile[verbatim,quote,texidoc,doctitle]
{changing-the-positions-of-figured-bass-alterations.ly}
-
@seealso
-@c Music Glossary:
-@c @rglos{}.
-@c
-@c Learning Manual:
-@c @rlearning{}.
-@c
-@c Notation Reference:
-@c @ref{}.
-@c
-@c Application Usage:
-@c @rprogram{}.
-@c
-@c Installed Files:
-@c @file{}.
-@c
Snippets:
@rlsr{Chords}.
@rinternals{FiguredBass}.
-@c @knownissues
-
-
@node Displaying figured bass
@unnumberedsubsubsec Displaying figured bass
When displayed in a @code{FiguredBass} context, the vertical location
of the figures is independent of the notes on the staff.
-@lilypond[verbatim,ragged-right,fragment,quote]
+@lilypond[verbatim,ragged-right,quote]
<<
\relative c'' {
c4 c'8 r8 c,4 c'
directly. In this case, the vertical position of the
figures is adjusted automatically.
-@lilypond[verbatim,ragged-right,fragment,quote]
+@lilypond[verbatim,ragged-right,quote]
<<
- \new Staff = myStaff
+ \new Staff = "myStaff"
\figuremode {
<4>4 <10 6>8 s8
<6 4>4 <6 4>
}
%% Put notes on same Staff as figures
- \context Staff = myStaff
+ \context Staff = "myStaff"
{
\clef bass
c4 c'8 r8 c4 c'
When added in a @code{Staff} context, figured bass can be displayed above
or below the staff.
-@lilypond[verbatim,ragged-right,fragment,quote]
+@lilypond[verbatim,ragged-right,quote]
<<
- \new Staff = myStaff
+ \new Staff = "myStaff"
\figuremode {
<4>4 <10 6>8 s8
\bassFigureStaffAlignmentDown
<6 4>4 <6 4>
}
%% Put notes on same Staff as figures
- \context Staff = myStaff
+ \context Staff = "myStaff"
{
\clef bass
c4 c'8 r8 c4 c'
>>
@end lilypond
-
@predefined
@cindex figured bass alignment
@code{\bassFigureStaffAlignmentDown},
@code{\bassFigureStaffAlignmentNeutral}.
@endpredefined
-
-@c @snippets
-
-
@seealso
-@c Music Glossary:
-@c @rglos{}.
-@c
-@c Learning Manual:
-@c @rlearning{}.
-@c
-@c Notation Reference:
-@c @ref{}.
-@c
-@c Application Usage:
-@c @rprogram{}.
-@c
-@c Installed Files:
-@c @file{}.
-@c
Snippets:
@rlsr{Chords}.
@rinternals{BassFigureContinuation},
@rinternals{FiguredBass}.
-
@knownissues
-
To ensure that continuation lines work properly, it is
safest to use the same rhythm in the figure line as in
the bass line.
-@lilypond[verbatim,ragged-right,fragment,quote]
+@lilypond[verbatim,ragged-right,quote]
<<
{
\clef bass
}
>>
@end lilypond
-
-When using extender lines, adjacent figures with the same number in
-a different figure location can cause the figure positions to invert.
-
-@lilypond[verbatim,ragged-right,fragment,quote,relative=1]
-<<
- { fis4 g g, e' }
- \figures {
- \bassFigureExtendersOn
- <6 5>4 <5\! 4> < 5 _!> <6>
- }
->>
-@end lilypond
-
-To avoid this problem, simply turn on extenders after the figure that
-begins the extender line and turn them off at the end of the extender line.
-
-@lilypond[verbatim,ragged-right,fragment,quote,relative=1]
-<<
- { fis4 g g, e' }
- \figures {
- <6 5>4 <5 4>
- \bassFigureExtendersOn
- < 5 _!>4 <6>
- \bassFigureExtendersOff
- }
->>
-@end lilypond
-
projects / lilypond.git / blobdiff