Guide, node Updating translation committishes..
@end ignore
-@c \version "2.15.20"
+@c \version "2.16.0"
@node Changing defaults
@chapter Changing defaults
@c TODO Should this be Modifying engravers or Modifying contexts?
-Notation contexts (like @code{Score} and @code{Staff}) not only
-store properties,
-they also contain plug-ins called @q{engravers} that create notation
-elements. For example, the @code{Voice} context contains a
+Notation contexts (like @code{Score} and @code{Staff}) not only store
+properties, they also contain plug-ins called @q{engravers} that create
+notation elements. For example, the @code{Voice} context contains a
@code{Note_heads_engraver} and the @code{Staff} context contains a
-@code{Key_signature_engraver}.
+@code{Key_engraver}.
For a full a description of each plug-in, see
@ifhtml
@knownissues
-Usually the order in which the engravers are specified
-does not matter, but in a few special cases the order
-is important, for example where one engraver writes
-a property and another reads it, or where one engraver
-creates a grob and another must process it. The order in
-which the engravers are specified is the order in which
-they are called to carry out their processing.
+The order in which the engravers are specified is the order in
+which they are called to carry out their processing. Usually the
+order in which the engravers are specified does not matter, but in
+a few special cases the order is important, for example where one
+engraver writes a property and another reads it, or where one
+engraver creates a grob and another must process it.
+
+The following orderings are important:
+
+@itemize
+@item
+the @code{Bar_engraver} must normally be first,
+
+@item
+the @code{New_fingering_engraver} must come before the
+@code{Script_column_engraver},
+
+@item
+the @code{Timing_translator} must come before the
+@code{Bar_number_engraver}.
+
+@end itemize
+
+@seealso
+Installed Files:
+@file{ly/engraver-init.ly}.
-The following orderings are important: the
-@code{Bar_engraver} must normally be first, and
-the @code{New_fingering_engraver} must come before
-the @code{Script_column_engraver}. There may be others
-with ordering dependencies.
@node Changing context default settings
@subsection Changing context default settings
+@cindex default context properties, changing
+@cindex context properties, changing defaults
+
+Context and grob properties can be changed with @code{\set}
+and @code{\override} commands, as described in
+@ref{Modifying properties}. These commands create music events,
+making the changes take effect at the point in time the music
+is being processed.
+
+In contrast, this section explains how to change the @emph{default}
+values of context and grob properties at the time the context is
+created. There are two ways of doing this. One modifies the default
+values in all contexts of a particular type, the other modifies the
+default values in just one particular instance of a context.
+
+@menu
+* Changing all contexts of the same type::
+* Changing just one specific context::
+* Order of precedence::
+@end menu
+
+@node Changing all contexts of the same type
+@unnumberedsubsubsec Changing all contexts of the same type
+
+@cindex \context in \layout block
+@funindex \context
+@funindex \layout
+
The context settings which are to be used by default in
-@code{Score}, @code{Staff} and @code{Voice} contexts may be specified
-in a @code{\layout} block, as illustrated in the following example.
+@code{Score}, @code{Staff}, @code{Voice} and other contexts may be
+specified in a @code{\context} block within any @code{\layout} block.
The @code{\layout} block should be placed within the @code{\score}
-block to which it is to apply, but outside any music.
+block to which it is to apply, after the music.
-Note that the @code{\set} command itself and the context must be
-omitted when the context default values are specified in this way:
+@example
+\layout @{
+ \context @{
+ \Voice
+ [context settings for all Voice contexts]
+ @}
+ \context @{
+ \Staff
+ [context settings for all Staff contexts]
+ @}
+@}
+@end example
+
+The following types of settings may be specified:
+
+@itemize
+@item
+An @code{\override} command, but with the context name omitted
@lilypond[quote,verbatim]
\score {
\relative c'' {
- a4^"Really small, thicker stems, no time signature" a a a
- a a a a
+ a4^"Thicker stems" a a a
+ a4 a a\ff a
}
\layout {
\context {
\Staff
- fontSize = #-4
\override Stem #'thickness = #4.0
- \remove "Time_signature_engraver"
}
}
}
@end lilypond
-In this example, the @code{\Staff} command specifies that the
-subsequent specifications are to be applied to all staves within
-this score block.
-
-Modifications can be made to the @code{Score} context or all
-@code{Voice} contexts in a similar way.
+@item
+Directly setting a context property
-Context changes can be placed in a variable and applied to a
-@code{\context} definition by prepending the modification with
-@code{\with}:
@lilypond[quote,verbatim]
-blubb = \with {
- fontSize = #-4
- \override Stem #'thickness = #4.0
- \remove "Time_signature_engraver"
+\score {
+ \relative c'' {
+ a4^"Smaller font" a a a
+ a4 a a\ff a
+ }
+ \layout {
+ \context {
+ \Staff
+ fontSize = #-4
+ }
+ }
}
+@end lilypond
-bla = \with {
- fontSize = #3
- \override Stem #'thickness = #-2.0
+@item
+A predefined command such as @code{\dynamicUp} or a music
+expression like @code{\accidentalStyle "dodecaphonic"}
+
+@lilypond[quote,verbatim]
+\score {
+ \relative c'' {
+ a4^"Dynamics above" a a a
+ a4 a a\ff a
+ }
+ \layout {
+ \context {
+ \Voice
+ \dynamicUp
+ }
+ \context {
+ \Staff
+ \accidentalStyle "dodecaphonic"
+ }
+ }
}
+@end lilypond
-melody = \relative c'' {
- a4 a a a |
- a4 a a a |
+@item
+A user-defined variable containing a @code{\with} block; for details
+of the @code{\with} block see
+@ref{Changing just one specific context}.
+
+@lilypond[quote,verbatim]
+StaffDefaults = \with {
+ fontSize = #-4
}
\score {
- <<
- \new Staff <<
- \melody
- s1*0^"Small, thicker stems, no time signature"
- >>
- \new Staff \bla <<
- \melody
- s1*0^"Different"
- >>
- >>
+ \new Staff {
+ \relative c'' {
+ a4^"Smaller font" a a a
+ a4 a a a
+ }
+ }
\layout {
\context {
\Staff
- \blubb
+ \StaffDefaults
}
}
}
@end lilypond
-@c TODO: add \with in here.
+@end itemize
+Property-setting commands can be placed in a @code{\layout} block
+without being enclosed in a @code{\context} block. Such settings
+are equivalent to including the same property-setting commands at
+the start of every context of the type specified. If no context
+is specified @emph{every} bottom-level context is affected, see
+@ref{Bottom-level contexts - voices}. The syntax of a
+property-setting command in a @code{\layout} block is the same as
+the same command written in the music stream.
+
+@lilypond[quote,verbatim]
+\score {
+ \new Staff {
+ \relative c'' {
+ a4^"Smaller font" a a a
+ a4 a a a
+ }
+ }
+ \layout {
+ \accidentalStyle "dodecaphonic"
+ \set fontSize = #-4
+ \override Voice.Stem #'thickness = #4.0
+ }
+}
+@end lilypond
+
+
+@node Changing just one specific context
+@unnumberedsubsubsec Changing just one specific context
+
+@cindex \with
+@funindex \with
+
+The context properties of just one specific context instance can be
+changed in a @code{\with} block. All other context instances of the
+same type retain the default settings built into LilyPond and modified
+by any @code{\layout} block within scope. The @code{\with} block
+must be placed immediately after the @code{\new} @var{context-type}
+command:
+
+@example
+\new Staff
+\with @{
+ [context settings for this context instance only]
+@} @{
+...
+@}
+@end example
+
+The following types of settings may be specified:
+
+@itemize
+@item
+An @code{\override} command, but with the context name omitted
+
+@lilypond[quote,verbatim]
+\score {
+ \new Staff {
+ \new Voice
+ \with {
+ \override Stem #'thickness = #4.0
+ }
+ {
+ \relative c'' {
+ a4^"Thick stems" a a a
+ a4 a a a
+ }
+ }
+ }
+}
+@end lilypond
+
+@item
+Directly setting a context property
+
+@lilypond[quote,verbatim]
+\score {
+ <<
+ \new Staff {
+ \relative c'' {
+ a4^"Default font" a a a
+ a4 a a a
+ }
+ }
+ \new Staff
+ \with {
+ fontSize = #-4
+ } {
+ \relative c'' {
+ a4^"Smaller font" a a a
+ a4 a a a
+ }
+ }
+ >>
+}
+@end lilypond
+
+@item
+A predefined command such as @code{\dynamicUp}
+
+@lilypond[quote,verbatim]
+\score {
+ <<
+ \new Staff {
+ \new Voice {
+ \relative c'' {
+ a4^"Dynamics below" a a a
+ a4 a a\ff a
+ }
+ }
+ }
+ \new Staff
+ \with { \accidentalStyle "dodecaphonic" }
+ {
+ \new Voice
+ \with { \dynamicUp }
+ {
+ \relative c'' {
+ a4^"Dynamics above" a a a
+ a4 a a\ff a
+ }
+ }
+ }
+ >>
+}
+@end lilypond
+
+@end itemize
+
+@node Order of precedence
+@unnumberedsubsubsec Order of precedence
+
+The value of a property which applies at a particular time is
+determined as follows:
+
+@itemize
+@item
+if an @code{\override} or @code{\set} command in the input stream is
+in effect that value is used,
+
+@item
+otherwise the default value taken from a @code{\with} statement
+on the context initiation statement is used,
+
+@item
+otherwise the default value taken from the most recent appropriate
+@code{\context} block in the @code{\layout} blocks is used,
+
+@item
+otherwise the LilyPond built-in default is used.
+@end itemize
+
+@seealso
+Learning Manual:
+@rlearning{Modifying context properties}.
+
+Notation Reference:
+@ref{Contexts explained},
+@ref{Bottom-level contexts - voices},
+@ref{The set command},
+@ref{The override command},
+@ref{The \layout block}.
@node Defining new contexts
is encountered when there is no suitable context available to
contain it. This can give rise to unexpected new staves or scores.
+@cindex alignAboveContext
+@cindex alignBelowContext
+@funindex alignAboveContext
+@funindex alignBelowContext
+
+Sometimes a context is required to exist for just a brief period, a
+good example being the staff context for an ossia. This is usually
+achieved by introducing the context definition at the appropriate
+place in parallel with corresponding section of the main music.
+By default, the temporary context will be placed below all the
+existing contexts. To reposition it above the context called
+@qq{main}, it should be defined like this:
+
+@example
+@code{\new Staff \with @{ alignAboveContext = #"main" @} }
+@end example
+
+A similar situation arises when positioning a temporary lyrics
+context within a multi-staved layout such as a @code{ChoirStaff},
+for example, when adding a second verse to a repeated section.
+By default the temporary lyrics context will be placed beneath the
+lower staves. By defining the temporary lyrics context with
+@code{alignBelowContext} it can be positioned correctly beneath
+the (named) lyrics context containing the first verse.
+
+Examples showing this repositioning of temporary contexts can be
+found elsewhere --- see @rlearning{Nesting music expressions},
+@ref{Modifying single staves} and @ref{Techniques specific to lyrics}.
+
@seealso
+Learning Manual:
+@rlearning{Nesting music expressions}.
+
+Notation Reference:
+@ref{Modifying single staves},
+@ref{Techniques specific to lyrics}.
+
Application Usage:
@rprogram{An extra staff appears}.
syntax:
@example
-\tweak #'@code{grob-property} #@code{value}
+\tweak @var{layout-object} #'@var{grob-property} @var{value}
@end example
-The @code{\tweak} command applies to the object that immediately
-follows @code{value} in the music stream.
+Specifying @var{layout-object} is optional.
+The @code{\tweak} command applies to the music object that immediately
+follows @var{value} in the music stream.
@ignore
In some cases, it is possible to take a short-cut for tuning
For the @code{\tweak} command to work, it must
remain immediately adjacent to the object to which it is
to apply after the input file has been converted to a music stream.
-At times, LilyPond may insert additional items into the music stream
-during the parsing process. For example, when a note that is not
-explicitly part of a chord will be placed in a chord by LilyPond,
-so notes to be modified with @code{\tweak} must be placed inside
-a chord construct:
+Tweaking a whole chord does not do anything since its music event
+only acts as a container, and all layout objects are created from events
+inside of the @code{EventChord}:
@lilypond[relative=2,verbatim,quote]
\tweak #'color #red c4
-<\tweak #'color #red c>4
+\tweak #'color #red <c e>4
+<\tweak #'color #red c e>4
+@end lilypond
+
+The simple @code{\tweak} command cannot be used to modify any object
+that is not directly created from the input. In particular
+it will not affect stems, automatic
+beams or accidentals, since these are generated later by
+@code{NoteHead} layout objects rather than by music elements in the
+input stream.
+
+Such indirectly created layout objects can be tweaked using the explicit
+form of the @code{\tweak} command:
+
+@lilypond[relative=2,verbatim,quote]
+\tweak Stem #'color #red
+\tweak Beam #'color #green c8 e
+<c e \tweak Accidental #'font-size #-3 ges>4
@end lilypond
-The @code{\tweak} command cannot be used to modify any item
-that does not appear explicitly in the input file. In particular
-it cannot be used to modify stems,
-beams or accidentals directly, since these are generated later by
-note heads, rather than by music elements in the input stream.
-Nor can @code{\tweak} be used to modify clefs or time
+@code{\tweak} cannot be used to modify clefs or time
signatures, since these become separated from any preceding
@code{\tweak} command in the input stream by the automatic
insertion of extra elements required to specify the context.
@rextend{Displaying music expressions}.
@knownissues
-@cindex tweaks in a variable
-
-The @code{\tweak} command cannot be used inside a variable.
-
-@cindex tweaks in lyrics
-The @code{\tweak} commands cannot be used in @code{\lyricmode}.
@cindex tweaking control points
@cindex control points, tweaking
-The @code{\tweak} command will apply to only the first of several
-generated ties in a chord.
-
+The @code{\tweak} command cannot be used to modify the control
+points of just one of several ties in a chord, other than the first
+one encountered in the input file.
@node set versus override
@subsection @code{\set} vs. @code{\override}
@strong{The direction property}
-The position or direction of many layout objects is controlled
-by the @code{direction} property.
+The position or direction of many layout objects is controlled by the
+@code{direction} property.
-The value of the @code{direction} property may be
-set to @code{1}, meaning @qq{up} or @qq{above}, or to @w{@code{-1}},
-meaning @qq{down} or @qq{below}. The symbols @code{UP} and
-@code{DOWN} may be used instead of @code{1} and @w{@code{-1}}
-respectively. The default direction may be specified by setting
-@code{direction} to @code{0} or @code{CENTER}. Alternatively,
-in many cases predefined commands
-exist to specify the direction. These are all of the form
+The value of the @code{direction} property may be set to @code{1},
+meaning @qq{up} or @qq{above}, or to @w{@code{-1}}, meaning @qq{down} or
+@qq{below}. The symbols @code{UP} and @code{DOWN} may be used instead
+of @code{1} and @w{@code{-1}} respectively. The default direction may
+be specified by setting @code{direction} to @code{0} or @code{CENTER}.
+Alternatively, in many cases predefined commands exist to specify the
+direction. These are of the form
-@noindent
-@code{\xxxUp}, @code{xxxDown}, @code{xxxNeutral}
+@example
+@code{\xxxUp}, @code{\xxxDown} or @code{\xxxNeutral}
+@end example
@noindent
-where @code{xxxNeutral} means @qq{use the default direction}.
+where @code{\xxxNeutral} means @qq{use the default} direction.
See @rlearning{Within-staff objects}.
-In a few cases, arpeggio being the only common example, the value
-of the @code{direction} property specifies whether the object
-is to be placed to the right or left of the parent object. In
-this case @w{@code{-1}} or @code{LEFT} means @qq{to the left} and
-@code{1} or @code{RIGHT} means @qq{to the right}. @code{0}
-or @code{CENTER} means @qq{use the default} direction, as before.
+In a few cases, arpeggio for example, the value of the @code{direction}
+property can specify whether the object is to be placed to the right or
+left of the parent. In this case @w{@code{-1}} or @code{LEFT} means
+@qq{to the left} and @code{1} or @code{RIGHT} means @qq{to the right}.
+@code{0} or @code{CENTER} means @qq{use the default} direction.
@ignore
These all have side-axis set to #X
c2( c)
@end lilypond
+In polyphonic music, it is generally better to specify an explicit
+@code{voice} than change an object's direction. For more information.
+See @ref{Multiple voices}.
+
+@seealso
+Learning Manual:
+@rlearning{Within-staff objects}.
+
+Notation Reference:
+@ref{Multiple voices}.
+
@node Distances and measurements
@subsection Distances and measurements
where the last three columns indicate whether the layout objects
will be visible in the positions shown at the head of the columns:
-@multitable {@code{begin-of-line-invisible}} {@code{'#(#t #t #t)}} {yes} {yes} {yes}
+@multitable {@code{begin-of-line-invisible}} {@code{'#(#t #t #t)}} {Before} {At no} {After}
@headitem Function @tab Vector @tab Before @tab At no @tab After
@headitem form @tab form @tab break @tab break @tab break
@item @code{@var{@dots{}music@dots{}}}
@tab normal LilyPond input, using @code{$} (in places where only
Lilypond constructs are allowed) or @code{#} (to use it as a Scheme
-value or music function argument) to reference arguments
+value or music function argument or music inside of music lists) to
+reference arguments
(eg. @samp{#arg1}).
@end multitable
In addition to numbers, we can use music expressions such
as notes for arguments to music functions:
-@c TODO: use a better example (the music argument is redundant).
-
@lilypond[quote,verbatim,ragged-right]
custosNote =
#(define-music-function
(parser location note)
(ly:music?)
#{
- \once \override Voice.NoteHead #'stencil =
- #ly:text-interface::print
- \once \override Voice.NoteHead #'text =
- \markup \musicglyph #"custodes.mensural.u0"
- \once \override Voice.Stem #'stencil = ##f
- $note
+ \tweak NoteHead #'stencil #ly:text-interface::print
+ \tweak NoteHead #'text
+ \markup \musicglyph #"custodes.mensural.u0"
+ \tweak Stem #'stencil ##f
+ #note
#})
\relative c' { c4 d e f \custosNote g }
tempoPadded =
#(define-music-function
(parser location padding tempotext)
- (number? string?)
+ (number? markup?)
#{
\once \override Score.MetronomeMark #'padding = #padding
\tempo \markup { \bold #tempotext }
\relative c'' {
\tempo \markup { "Low tempo" }
c4 d e f g1
- \tempoPadded #4.0 #"High tempo"
+ \tempoPadded #4.0 "High tempo"
g4 f e d c1
}
@end lilypond
projects / lilypond.git / blobdiff