Guide, node Updating translation committishes..
@end ignore
-@c \version "2.19.7"
+@c \version "2.19.20"
@node Changing defaults
@chapter Changing defaults
time signature.
@cindex polymetric scores
-@cindex Time signatures, multiple
+@cindex time signature, multiple
@lilypond[quote,verbatim]
\score {
@seealso
Internals Reference:
-@rinternals{Engraver_group},
@rinternals{Note_heads_engraver},
@rinternals{Text_engraver},
@rinternals{Rhythmic_column_engraver},
@lilypond[quote,relative=2,verbatim]
c-2
-\stemUp
-f
@end lilypond
If you visit the documentation on fingering instructions (in
@lilypond[quote,relative=2,verbatim]
c-2
-\stemUp
-f
@end lilypond
Since the @b{2} is vertically positioned next to its note, we have to
@lilypond[quote,relative=2,verbatim]
\once \override Voice.Fingering.padding = #3
c-2
-\stemUp
-f
@end lilypond
* Input modes::
* Direction and placement::
* Distances and measurements::
+* Dimensions::
* Staff symbol properties::
* Spanners::
* Visibility of objects::
The way in which the notation contained within an input file is
interpreted is determined by the current input mode.
-@strong{Chord mode}
+@subsubsubheading Chord mode
This is activated with the @code{\chordmode} command, and causes
input to be interpreted with the syntax of chord notation, see
chord notation and rendered as chord names in the @code{ChordNames}
context, see @ref{Printing chord names}.
-@strong{Drum mode}
+@subsubsubheading Drum mode
This is activated with the @code{\drummode} command, and causes
input to be interpreted with the syntax of drum notation, see
Drum mode is also activated with the @code{\drums} command.
This also creates a new @code{DrumStaff} context and causes the
following input to be interpreted with the syntax of drum notation
-and rendered as drum symbols on a drum staff, see @ref{Basic
-percussion notation}.
+and rendered as drum symbols on a drum staff, see
+@ref{Basic percussion notation}.
-@strong{Figure mode}
+@subsubsubheading Figure mode
This is activated with the @code{\figuremode} command, and causes
input to be interpreted with the syntax of figured bass, see
and rendered as figured bass symbols in the @code{FiguredBass}
context, see @ref{Introduction to figured bass}.
-@strong{Fret and tab modes}
+@subsubsubheading Fret and tab modes
There are no special input modes for entering fret and tab symbols.
above the notes using the @code{\fret-diagram} command (see
@ref{Fret diagram markups}).
-@strong{Lyrics mode}
+@subsubsubheading Lyrics mode
This is activated with the @code{\lyricmode} command, and causes
input to be interpreted as lyric syllables with optional durations
@code{\lyricsto} command which associates the following lyrics
with the preceding music.
-@strong{Markup mode}
+@subsubsubheading Markup mode
This is activated with the @code{\markup} command, and causes
input to be interpreted with the syntax of markup, see
@ref{Text markup commands}.
-@c silly work-around for texinfo broken-ness
-@c (@strong{Note...} causes a spurious cross-reference in Info)
-@b{Note mode}
+@subsubsubheading Note mode
This is the default mode or it may be activated with the
@code{\notemode} command. Input is interpreted as pitches,
are in lyric mode, chord mode or any other mode and want to insert
something that only can be done with note mode syntax.
-For example, to indicate dynamic markings for the verses of a
-choral pieces it is necessary to enter note mode to interpret
-the markings:
-
-@lilypond[verbatim,relative=2,quote]
-{ c4 c4 c4 c4 }
-\addlyrics {
- \notemode{\set stanza = \markup{ \dynamic f 1. } }
- To be sung loudly
-}
-\addlyrics {
- \notemode{\set stanza = \markup{ \dynamic p 2. } }
- To be sung quietly
-}
-@end lilypond
-
-
@node Direction and placement
@subsection Direction and placement
@ref{Setting the staff size}.
+@node Dimensions
+@subsection Dimensions
+
+@cindex dimensions
+@cindex bounding box
+
+The dimensions of a graphical object specify the positions of the left
+and right edges and the bottom and top edges of the objects' bounding
+box as distances from the objects' reference point in units of
+staff-spaces. These positions are usually coded as two Scheme pairs.
+For example, the text markup command @code{\with-dimensions} takes
+three arguments, the first two of which are a Scheme pair giving the
+left and right edge positions and a Scheme pair giving the bottom and
+top edge positions:
+
+@example
+\with-dimensions #'(-5 . 10) #'(-3 . 15) @var{arg}
+@end example
+
+This specifies a bounding box for @var{arg} with its left edge at -5,
+its right edge at 10, its bottom edge at -3 and its top edge at 15,
+all measured from the objects' reference point in units of
+staff-spaces.
+
+@seealso
+Notation Reference:
+@ref{Distances and measurements}.
+
+
@node Staff symbol properties
@subsection Staff symbol properties
@lilypond[verbatim,quote,relative=2]
a1
-\compressFullBarRests
-R1*23
-% increase the length of the rest bar
-\once \override MultiMeasureRest.minimum-length = #20
-R1*23
-a1
+\compressMMRests {
+ R1*23
+ % increase the length of the rest bar
+ \once \override MultiMeasureRest.minimum-length = #20
+ R1*23
+ a1
+}
@end lilypond
@lilypond[verbatim,quote,relative=2]
@end itemize
The routine responsible for drawing the stencils for these spanners is
-@code{ly:line-interface::print}. This routine determines the
+@code{ly:line-spanner::print}. This routine determines the
exact location of the two end points and draws a line
between them, in the style requested. The locations of the two
end points of the spanner are computed on-the-fly, but it is
where the last three columns indicate whether the layout objects
will be visible in the positions shown at the head of the columns:
-@multitable {@code{begin-of-line-invisible}} {@code{'#(#t #t #t)}} {Before} {At no} {After}
-@headitem Function @tab Vector @tab Before @tab At no @tab After
-@headitem form @tab form @tab break @tab break @tab break
-
-@item @code{all-visible} @tab @code{'#(#t #t #t)} @tab yes @tab yes @tab yes
-@item @code{begin-of-line-visible} @tab @code{'#(#f #f #t)} @tab no @tab no @tab yes
-@item @code{center-visible} @tab @code{'#(#f #t #f)} @tab no @tab yes @tab no
-@item @code{end-of-line-visible} @tab @code{'#(#t #f #f)} @tab yes @tab no @tab no
-@item @code{begin-of-line-invisible} @tab @code{'#(#t #t #f)} @tab yes @tab yes @tab no
-@item @code{center-invisible} @tab @code{'#(#t #f #t)} @tab yes @tab no @tab yes
-@item @code{end-of-line-invisible} @tab @code{'#(#f #t #t)} @tab no @tab yes @tab yes
-@item @code{all-invisible} @tab @code{'#(#f #f #f)} @tab no @tab no @tab no
+@multitable {@code{begin-of-line-invisible}} {@code{#(#t #t #t)}} {Before} {At no} {After}
+@headitem Function @tab Vector @tab Before @tab At no @tab After
+@headitem form @tab form @tab break @tab break @tab break
+
+@item @code{all-visible} @tab @code{#(#t #t #t)} @tab yes @tab yes @tab yes
+@item @code{begin-of-line-visible} @tab @code{#(#f #f #t)} @tab no @tab no @tab yes
+@item @code{center-visible} @tab @code{#(#f #t #f)} @tab no @tab yes @tab no
+@item @code{end-of-line-visible} @tab @code{#(#t #f #f)} @tab yes @tab no @tab no
+@item @code{begin-of-line-invisible} @tab @code{#(#t #t #f)} @tab yes @tab yes @tab no
+@item @code{center-invisible} @tab @code{#(#t #f #t)} @tab yes @tab no @tab yes
+@item @code{end-of-line-invisible} @tab @code{#(#f #t #t)} @tab no @tab yes @tab yes
+@item @code{all-invisible} @tab @code{#(#f #f #f)} @tab no @tab no @tab no
@end multitable
The default settings of @code{break-visibility} depend on the
texts and the lines, and tuning their behavior is therefore also
done in the same way. It is done with a spanner, and the routine
responsible for drawing the spanners is
-@code{ly:line-interface::print}. This routine determines the
+@code{ly:line-spanner::print}. This routine determines the
exact location of the two @i{span points} and draws a line
between them, in the style requested.
projects / lilypond.git / blobdiff