Guide, node Updating translation committishes..
@end ignore
-@c \version "2.14.0"
+@c \version "2.17.6"
@node Fundamental concepts
@chapter Fundamental concepts
music. If a Voice context is not explicitly declared one is created
automatically, as we saw at the beginning of this chapter. Some
instruments such as an Oboe can play only one note at a time. Music
-written for such instruments is monophonic and requires just a single
-voice. Instruments which can play more than one note at a time like
-the piano will often require multiple voices to encode the different
-concurrent notes and rhythms they are capable of playing.
+written for such instruments requires just a single voice. Instruments
+which can play more than one note at a time like the piano will often
+require multiple voices to encode the different concurrent notes and
+rhythms they are capable of playing.
A single voice can contain many notes in a chord, of course,
so when exactly are multiple voices needed? Look first at
@code{\\}, to place them in separate voices. Without these, the
notes would be entered into a single voice, which would usually
cause errors. This technique is particularly suited to pieces of
-music which are largely monophonic with occasional short sections
+music which are largely homophonic with occasional short sections
of polyphony.
Here's how we split the chords above into two voices and add both
\\ % Voice two
{
% Ignore these for now - they are explained in Ch 4
- \once \override NoteColumn #'ignore-collision = ##t
+ \once \override NoteColumn.ignore-collision = ##t
<ees, c>2
- \once \override NoteColumn #'force-hshift = #0.5
+ \once \override NoteColumn.force-hshift = #0.5
des2
}
\\ % No voice three
\\ % Voice four
{
- \override NoteColumn #'force-hshift = #0
+ \override NoteColumn.force-hshift = #0
aes'2 f4 fes
}
>> |
\\ % Voice two
{ \voiceTwoStyle
% Ignore these for now - they are explained in Ch 4
- \once \override NoteColumn #'ignore-collision = ##t
+ \once \override NoteColumn.ignore-collision = ##t
<ees, c>2
- \once \override NoteColumn #'force-hshift = #0.5
+ \once \override NoteColumn.force-hshift = #0.5
des2
}
\\ % No Voice three (we want stems down)
\\ % Voice four
{ \voiceThreeStyle
- \override NoteColumn #'force-hshift = #0
+ \override NoteColumn.force-hshift = #0
aes'2 f4 fes
}
>> |
}
@end lilypond
-Now let's look at three different ways to notate the same passage
-of polyphonic music, each of which is advantageous in different
+Now let's look at three different ways to notate the same passage of
+polyphonic music, each of which is advantageous in different
circumstances, using the example from the previous section.
-An expression that appears directly inside a @code{<< >>} belongs
-to the main voice (but, note, @strong{not} in a @code{<< \\ >>}
-construct). This is useful when extra voices appear while the
-main voice is playing. Here is a more correct rendition of our
-example. The red diamond-shaped notes
-demonstrate that the main melody is now in a single voice context,
+An expression that appears directly inside a @code{<< >>} belongs to the
+main voice (but, note, @strong{not} in a @code{<< \\ >>} construct).
+This is useful when extra voices appear while the main voice is playing.
+Here is a more correct rendition of our example. The red diamond-shaped
+notes demonstrate that the main melody is now in a single voice context,
permitting a phrasing slur to be drawn over them.
@lilypond[quote,ragged-right,verbatim]
\new Staff \relative c' {
\voiceOneStyle
- % The following notes are monophonic
+ % This section is homophonic
c16^( d e f
% Start simultaneous section of three voices
<<
@seealso
-Notation Reference: @ruser{Creating contexts}.
+Notation Reference: @ruser{Creating and referencing contexts}.
@node Engravers explained
@lilypond[quote,verbatim,ragged-right]
\new Staff \with {
- \remove Staff_symbol_engraver
+ \remove "Staff_symbol_engraver"
}
\relative c' {
c4 d
@lilypond[quote,verbatim,ragged-right]
\new Staff <<
\new Voice \with {
- \consists Ambitus_engraver
+ \consists "Ambitus_engraver"
} {
\relative c'' {
\voiceOne
@lilypond[quote,verbatim,ragged-right]
\new Staff \with {
- \consists Ambitus_engraver
+ \consists "Ambitus_engraver"
}
<<
\new Voice {
\layout {
\context {
\Staff
- \consists Ambitus_engraver
+ \consists "Ambitus_engraver"
}
}
}
@seealso
The starting templates can be found in the @q{Templates} appendix,
-see @ref{Single staff}.
+see @ref{Single staff templates}.
@node Four-part SATB vocal score
@end lilypond
None of the templates provides this layout exactly. The nearest is
-@q{SATB vocal score and automatic piano reduction} -- see
-@ref{Vocal ensembles} -- but we need to change the layout and add a piano
+@ref{SATB vocal score and automatic piano reduction} -- but we need
+to change the layout and add a piano
accompaniment which is not derived automatically from the vocal parts.
The variables holding the music and words for the vocal parts are
fine, but we shall need to add variables for the piano reduction.
@}
>> % end ManualOne Staff context
\new Staff = "ManualTwo" \with @{
- \override VerticalAxisGroup
- #'staff-staff-spacing #'stretchability = 5
+ \override VerticalAxisGroup.staff-staff-spacing.stretchability = 5
@} <<
\keyTime
\clef "bass"
}
ManualTwoMusic = \relative c' {
c16 b c8~ c16 b c g a8 g~ g16 g aes ees |
- f16 ees f d g aes g f ees d e8~ ees16 f ees d |
+ f16 ees f d g aes g f ees d ees8~ ees16 f ees d |
}
PedalOrganMusic = \relative c {
r8 c16 d ees d ees8~ ees16 a, b g c b c8 |
}
>> % end ManualOne Staff context
\new Staff = "ManualTwo" \with {
- \override VerticalAxisGroup
- #'staff-staff-spacing #'stretchability = 5
+ \override VerticalAxisGroup.staff-staff-spacing.stretchability = 5
} <<
\keyTime
\clef "bass"
@lilypond[quote,verbatim,ragged-right]
dolce = \markup { \italic \bold dolce }
-padText = { \once \override TextScript #'padding = #5.0 }
+padText = { \once \override TextScript.padding = #5.0 }
fthenp =_\markup {
\dynamic f \italic \small { 2nd } \hspace #0.1 \dynamic p
}
violin = \relative c'' @{
\repeat volta 2 @{
c4._\markup @{ \italic \bold dolce @} b8 a8 g a b |
- \once \override TextScript #'padding = #5.0
+ \once \override TextScript.padding = #5.0
c4.^"hi there!" d8 e' f g d |
c,4.\markup @{
\dynamic f \italic \small @{ 2nd @} \hspace #0.1 \dynamic p
(parser location padding)
(number?)
#{
- \once \override TextScript #'padding = $padding
+ \once \override TextScript.padding = #padding
#})
\relative c''' {
projects / lilypond.git / blobdiff