]> git.donarmstrong.com Git - lilypond.git/blobdiff - Documentation/learning/fundamental.itely
Fix bad cross reference
[lilypond.git] / Documentation / learning / fundamental.itely
index 108d200ca02a6298bb783ea019c07a25ebc58437..c796c5163dd76118e3597d57862d54be1e6aec40 100644 (file)
@@ -8,7 +8,7 @@
     Guide, node Updating translation committishes..
 @end ignore
 
-@c \version "2.19.2"
+@c \version "2.19.22"
 
 @node Fundamental concepts
 @chapter Fundamental concepts
@@ -80,8 +80,8 @@ adds the extra commands which are needed when you give it simple
 input.  LilyPond treats input like this:
 
 @example
-\relative c'' @{
-  c4 a d c
+\relative @{
+  c''4 a d c
 @}
 @end example
 
@@ -93,8 +93,8 @@ as shorthand for this:
   \score @{
     \new Staff @{
       \new Voice @{
-        \relative c'' @{
-          c4 a b c
+        \relative @{
+          c''4 a b c
         @}
       @}
     @}
@@ -178,7 +178,7 @@ Two more commands you have not previously seen are
 shown they will cause LilyPond to produce a printed output and a
 MIDI output respectively.  They are described fully in the
 Notation Reference -- @ruser{Score layout}, and
-@ruser{Creating MIDI files}.
+@ruser{Creating MIDI output}.
 
 @cindex scores, multiple
 @cindex book block, implicit
@@ -222,8 +222,8 @@ shown in @ref{Organizing pieces with variables}.  All the
 templates use this:
 
 @example
-melody = \relative c' @{
-  c4 a b c
+melody = \relative @{
+  c'4 a b c
 @}
 
 \score @{
@@ -341,8 +341,8 @@ At this stage, we could start filling in notes.  Inside the curly
 braces next to @code{\new Voice = "vocal"}, we could start writing
 
 @example
-\relative c'' @{
-  r4 d8\noBeam g, c4 r
+\relative @{
+  r4 d''8\noBeam g, c4 r
 @}
 @end example
 
@@ -360,10 +360,10 @@ So, adding a few notes and a bass clef for the left hand, we now
 have a piece of real music:
 
 @lilypond[verbatim,quote,ragged-right]
-melody = \relative c'' { r4 d8\noBeam g, c4 r }
+melody = \relative { r4 d''8\noBeam g, c4 r }
 text   = \lyricmode { And God said, }
-upper  = \relative c'' { <g d g,>2~ <g d g,> }
-lower  = \relative c { b2 e }
+upper  = \relative { <g' d g,>2~ <g d g,> }
+lower  = \relative { b,2 e }
 
 \score {
   <<
@@ -409,8 +409,8 @@ duration of three notes:
 
 @lilypond[verbatim,quote,ragged-right]
 \new Staff {
-  \relative g' {
-    r4 g8 g c4 c8 d |
+  \relative {
+    r4 g'8 g c4 c8 d |
     e4 r8
     <<
       { f8 c c }
@@ -436,8 +436,8 @@ as follows:
 
 @lilypond[verbatim,quote,ragged-right]
 \new Staff = "main" {
-  \relative g' {
-    r4 g8 g c4 c8 d |
+  \relative {
+    r4 g'8 g c4 c8 d |
     e4 r8
     <<
       { f8 c c }
@@ -678,9 +678,9 @@ voice in context @code{"1"} and the lowest voice in context
 of slurs, stems, ties, dynamics etc., is set appropriately.
 
 @lilypond[quote,verbatim]
-\new Staff \relative c' {
+\new Staff \relative {
   % Main voice
-  c16 d e f
+  c'16 d e f
   %    Voice "1"     Voice "2"                Voice "3"
   << { g4 f e } \\ { r8 e4 d c8~ } >> |
   << { d2 e }   \\ { c8 b16 a b8 g~ 2 } \\ { s4 b c2 } >> |
@@ -702,9 +702,9 @@ split across the same voices in two constructs, shown here in the
 blue triangle voice.
 
 @lilypond[quote,verbatim]
-\new Staff \relative c' {
+\new Staff \relative {
   % Main voice
-  c16 d e f
+  c'16 d e f
   <<  % Bar 1
     {
       \voiceOneStyle
@@ -759,7 +759,7 @@ the note immediately preceding it, or to the first note of the
 preceding chord.  So in
 
 @example
-\relative c' @{ noteA << < noteB noteC > \\ noteD >> noteE @}
+\relative @{ noteA << < noteB noteC > \\ noteD >> noteE @}
 @end example
 
 @noindent
@@ -774,13 +774,13 @@ voices are widely separated, is to place a @code{\relative}
 command at the start of each voice:
 
 @example
-\relative c' @{ noteA @dots{} @}
+\relative @{ noteA @dots{} @}
 <<
-  \relative c'' @{ < noteB noteC > @dots{} @}
+  \relative @{ < noteB noteC > @dots{} @}
 \\
-  \relative g' @{ noteD @dots{} @}
+  \relative @{ noteD @dots{} @}
 >>
-\relative c' @{ noteE @dots{} @}
+\relative @{ noteE @dots{} @}
 @end example
 
 Let us finally analyze the voices in a more complex piece of music.
@@ -794,10 +794,10 @@ later sections.
 
 @c The following should appear as music without code
 @lilypond[quote,ragged-right]
-\new Staff \relative c'' {
+\new Staff \relative {
   \key aes \major
   <<  % Voice one
-    { c2 aes4. bes8 }
+    { c''2 aes4. bes8 }
   \\  % Voice two
     {
       % Ignore these for now - they are explained in Ch 4
@@ -841,12 +841,12 @@ not understand.
 @c The following should appear as music without code
 @c The three voice styles should be defined in -init
 @lilypond[quote,ragged-right]
-\new Staff \relative c'' {
+\new Staff \relative {
   \key aes \major
   <<
     {  % Voice one
       \voiceOneStyle
-      c2 aes4. bes8
+      c''2 aes4. bes8
     }
   \\  % Voice two
     { \voiceTwoStyle
@@ -874,10 +874,10 @@ we have learnt, using the @code{<< \\  >>} construct to
 enter the music of the first bar in three voices:
 
 @lilypond[quote,verbatim,ragged-right]
-\new Staff \relative c'' {
+\new Staff \relative {
   \key aes \major
   <<
-    { c2 aes4. bes8 } \\ { <ees, c>2 des } \\ { aes'2 f4 fes }
+    { c''2 aes4. bes8 } \\ { <ees, c>2 des } \\ { aes'2 f4 fes }
   >> |
   <c ees aes c>1 |
 }
@@ -897,10 +897,10 @@ and placing the music in voice four.  This is done by simply
 adding another pair of @code{\\}.
 
 @lilypond[quote,verbatim,ragged-right]
-\new Staff \relative c'' {
+\new Staff \relative {
   \key aes \major
   <<  % Voice one
-    { c2 aes4. bes8 }
+    { c''2 aes4. bes8 }
   \\  % Voice two
     { <ees, c>2 des }
   \\  % Omit Voice three
@@ -959,8 +959,8 @@ the previous section:
 
 @example
 \new Staff @{
-  \relative c' @{
-    << @{ e4 f g a @} \\ @{ c,4 d e f @} >>
+  \relative @{
+    << @{ e'4 f g a @} \\ @{ c,4 d e f @} >>
   @}
 @}
 @end example
@@ -970,8 +970,8 @@ is equivalent to
 
 @example
 \new Staff <<
-  \new Voice = "1" @{ \voiceOne \relative c' @{ e4 f g a @} @}
-  \new Voice = "2" @{ \voiceTwo \relative c' @{ c4 d e f @} @}
+  \new Voice = "1" @{ \voiceOne \relative @{ e'4 f g a @} @}
+  \new Voice = "2" @{ \voiceTwo \relative @{ c'4 d e f @} @}
 >>
 @end example
 
@@ -980,8 +980,8 @@ Both of the above would produce
 @c The following example should not display the code
 @lilypond[ragged-right,quote]
 \new Staff <<
-  \new Voice = "1" { \voiceOne \relative c' { e4 f g a } }
-  \new Voice = "2" { \voiceTwo \relative c' { c4 d e f } }
+  \new Voice = "1" { \voiceOne \relative { e'4 f g a } }
+  \new Voice = "2" { \voiceTwo \relative { c'4 d e f } }
 >>
 @end lilypond
 
@@ -1002,25 +1002,25 @@ Let us see in some simple examples exactly what effect
 markup, ties, slurs, and dynamics:
 
 @lilypond[quote,ragged-right,verbatim]
-\relative c' {
+\relative {
   % Default behavior or behavior after \oneVoice
-  c4 d8~ 8 e4( f | g4 a) b-> c |
+  c'4 d8~ 8 e4( f | g4 a) b-> c |
 }
 @end lilypond
 
 @lilypond[quote,ragged-right,verbatim]
-\relative c' {
+\relative {
   \voiceOne
-  c4 d8~ 8 e4( f | g4 a) b-> c |
+  c'4 d8~ 8 e4( f | g4 a) b-> c |
   \oneVoice
   c,4 d8~ 8 e4( f | g4 a) b-> c |
 }
 @end lilypond
 
 @lilypond[quote,ragged-right,verbatim]
-\relative c' {
+\relative {
   \voiceTwo
-  c4 d8~ 8 e4( f | g4 a) b-> c |
+  c'4 d8~ 8 e4( f | g4 a) b-> c |
   \oneVoice
   c,4 d8~ 8 e4( f | g4 a) b-> c |
 }
@@ -1038,10 +1038,10 @@ notes demonstrate that the main melody is now in a single voice context,
 permitting a phrasing slur to be drawn over them.
 
 @lilypond[quote,ragged-right,verbatim]
-\new Staff \relative c' {
+\new Staff \relative {
   \voiceOneStyle
   % This section is homophonic
-  c16^( d e f
+  c'16^( d e f
   % Start simultaneous section of three voices
   <<
     % Continue the main voice in parallel
@@ -1073,8 +1073,8 @@ voice appears only briefly this might be a more natural way to
 typeset the music:
 
 @lilypond[quote,ragged-right,verbatim]
-\new Staff \relative c' {
-  c16^( d e f
+\new Staff \relative {
+  c'16^( d e f
   <<
     { g4 f e | d2 e) | }
     \new Voice {
@@ -1102,11 +1102,11 @@ spacing notes to step over sections where the voice is silent,
 as here:
 
 @lilypond[quote,ragged-right,verbatim]
-\new Staff \relative c' <<
+\new Staff \relative <<
   % Initiate first voice
   \new Voice {
     \voiceOne
-    c16^( d e f g4 f e | d2 e) |
+    c'16^( d e f g4 f e | d2 e) |
   }
   % Initiate second voice
   \new Voice {
@@ -1203,10 +1203,10 @@ name assigned to the Voice.
 @lilypond[quote,verbatim]
 <<
   \new Voice = "one" {
-    \relative c'' {
+    \relative {
       \autoBeamOff
       \time 2/4
-      c4 b8. a16 | g4. f8 | e4 d | c2 |
+      c''4 b8. a16 | g4. f8 | e4 d | c2 |
     }
   }
   \new Lyrics \lyricsto "one" {
@@ -1249,14 +1249,14 @@ rather than music.
 @lilypond[quote,verbatim]
 global = { \key f \major \time 6/8 \partial 8 }
 
-SopOneMusic = \relative c'' {
-  c8 | c8([ bes)] a a([ g)] f | f'4. b, | c4.~ 4
+SopOneMusic = \relative {
+  c''8 | c8([ bes)] a a([ g)] f | f'4. b, | c4.~ 4
 }
 SopOneLyrics = \lyricmode {
   Let | flee -- cy flocks the | hills a -- dorn, __
 }
-SopTwoMusic = \relative c' {
-  r8 | r4. r4 c8 | a'8([ g)] f f([ e)] d | e8([ d)] c bes'
+SopTwoMusic = \relative {
+  r8 | r4. r4 c'8 | a'8([ g)] f f([ e)] d | e8([ d)] c bes'
 }
 SopTwoLyrics = \lyricmode {
   Let | flee -- cy flocks the | hills a -- dorn,
@@ -1308,10 +1308,10 @@ examples this is often called @q{global}.
 @lilypond[quote,verbatim]
 keyTime = { \key c \major \time 4/4 \partial 4 }
 
-SopMusic   = \relative c' { c4 | e4. e8 g4  g    | a4   a   g  }
-AltoMusic  = \relative c' { c4 | c4. c8 e4  e    | f4   f   e  }
-TenorMusic = \relative c  { e4 | g4. g8 c4.   b8 | a8 b c d e4 }
-BassMusic  = \relative c  { c4 | c4. c8 c4  c    | f8 g a b c4 }
+SopMusic   = \relative { c'4 | e4. e8 g4  g    | a4   a   g  }
+AltoMusic  = \relative { c'4 | c4. c8 e4  e    | f4   f   e  }
+TenorMusic = \relative  e4 | g4. g8 c4.   b8 | a8 b c d e4 }
+BassMusic  = \relative  c4 | c4. c8 c4  c    | f8 g a b c4 }
 
 VerseOne =
   \lyricmode { E -- | ter -- nal fa -- ther, | strong to save, }
@@ -1487,8 +1487,8 @@ annotated real-music example:
       \clef "treble"
       \key g \minor
       \new Voice {  % create voice for RH notes
-        \relative c'' {  % start of RH notes
-          d4 ees16 c8. |
+        \relative {  % start of RH notes
+          d''4 ees16 c8. |
           d4 ees16 c8. |
         }  % end of RH notes
       }  % end of RH voice
@@ -1498,14 +1498,14 @@ annotated real-music example:
       \key g \minor
       \new Voice {  % create LH voice one
         \voiceOne
-        \relative {  % start of LH voice one notes
+        \relative {  % start of LH voice one notes
           g8 <bes d> ees, <g c> |
           g8 <bes d> ees, <g c> |
         }  % end of LH voice one notes
       }  % end of LH voice one
       \new Voice {  % create LH voice two
         \voiceTwo
-        \relative {  % start of LH voice two notes
+        \relative {  % start of LH voice two notes
           g4 ees |
           g4 ees |
         }  % end of LH voice two notes
@@ -1725,13 +1725,13 @@ because we omitted the context name.
 
 @lilypond[quote,verbatim,ragged-right]
 <<
-  \new Staff \relative c'' {
+  \new Staff \relative {
     \set Staff.instrumentName = #"Soprano"
-    c2 c
+    c''2 c
   }
-  \new Staff \relative c' {
+  \new Staff \relative {
     \set instrumentName = #"Alto"  % Wrong!
-    d2 d
+    d'2 d
   }
 >>
 @end lilypond
@@ -1770,12 +1770,12 @@ So this turns off extra naturals in one staff:
 
 @lilypond[quote,verbatim,ragged-right]
 <<
-  \new Staff \relative c'' {
-    aeses2 aes
+  \new Staff \relative {
+    aeses'2 aes
   }
-  \new Staff \relative c'' {
+  \new Staff \relative {
     \set Staff.extraNatural = ##f
-    aeses2 aes
+    aeses'2 aes
   }
 >>
 @end lilypond
@@ -1785,12 +1785,12 @@ and this turns them off in all staves:
 
 @lilypond[quote,verbatim,ragged-right]
 <<
-  \new Staff \relative c'' {
-    aeses2 aes
+  \new Staff \relative {
+    aeses'2 aes
   }
-  \new Staff \relative c'' {
+  \new Staff \relative {
     \set Score.extraNatural = ##f
-    aeses2 aes
+    aeses'2 aes
   }
 >>
 @end lilypond
@@ -1860,13 +1860,13 @@ like this:
 @lilypond[quote,verbatim,ragged-right]
 <<
   \new Staff {
-    \relative c'' {
-      gisis4 gis aeses aes
+    \relative {
+      gisis'4 gis aeses aes
     }
   }
   \new Staff \with { extraNatural = ##f } {
-    \relative c'' {
-      gisis4 gis aeses aes
+    \relative {
+      gisis'4 gis aeses aes
     }
   }
 >>
@@ -1903,8 +1903,8 @@ throughout the @code{\score} or @code{\book} block in which the
 @lilypond[verbatim,quote]
 \score {
   \new Staff {
-    \relative c'' {
-      cisis4 e d cis
+    \relative {
+      cisis''4 e d cis
     }
   }
   \layout {
@@ -1923,13 +1923,13 @@ within the score:
 \score {
   <<
     \new Staff {
-      \relative c'' {
-        gisis4 gis aeses aes
+      \relative {
+        gisis'4 gis aeses aes
       }
     }
     \new Staff {
-      \relative c'' {
-        gisis4 gis aeses aes
+      \relative {
+        gisis'4 gis aeses aes
       }
     }
   >>
@@ -1991,8 +1991,8 @@ produced by the @code{Staff_symbol_engraver}.
 \new Staff \with {
   \remove "Staff_symbol_engraver"
 }
-\relative c' {
-  c4 d
+\relative {
+  c'4 d
   \set fontSize = #-4  % make note heads smaller
   e4 f |
   \set fontSize = #2.5  % make note heads larger
@@ -2022,15 +2022,15 @@ range from that voice only:
   \new Voice \with {
     \consists "Ambitus_engraver"
   } {
-    \relative c'' {
+    \relative {
       \voiceOne
-      c4 a b g
+      c''4 a b g
     }
   }
   \new Voice {
-    \relative c' {
+    \relative {
       \voiceTwo
-      c4 e d f
+      c'4 e d f
     }
   }
 >>
@@ -2047,15 +2047,15 @@ the notes in all the voices on that staff:
 }
 <<
   \new Voice {
-    \relative c'' {
+    \relative {
       \voiceOne
-      c4 a b g
+      c''4 a b g
     }
   }
   \new Voice {
-    \relative c' {
+    \relative {
       \voiceTwo
-      c4 e d f
+      c'4 e d f
     }
   }
 >>
@@ -2077,24 +2077,24 @@ staff in a four-staff score, we could write
 \score {
   <<
     \new Staff {
-      \relative c'' {
-        c4 a b g
+      \relative {
+        c''4 a b g
       }
     }
     \new Staff {
-      \relative c' {
-        c4 a b g
+      \relative {
+        c'4 a b g
       }
     }
     \new Staff {
       \clef "G_8"
-      \relative c' {
-        c4 a b g
+      \relative {
+        c'4 a b g
       }
     }
     \new Staff {
       \clef "bass"
-      \relative {
+      \relative {
         c4 a b g
       }
     }
@@ -2156,7 +2156,7 @@ soprano and cello.  In this case, we would start with the
 @example
 \version @w{"@version{}"}
 
-melody = \relative c' @{
+melody = \relative @{
   \clef "treble"
   \key c \major
   \time 4/4
@@ -2185,7 +2185,7 @@ Now we want to add a cello part.  Let's look at the @q{Notes only} example:
 @example
 \version @w{"@version{}"}
 
-melody = \relative c' @{
+melody = \relative @{
   \clef "treble"
   \key c \major
   \time 4/4
@@ -2213,7 +2213,7 @@ section for the soprano @code{sopranoMusic} and the section for
 the cello @code{celloMusic}.  While we're doing this, let's rename
 @code{text} to be @code{sopranoLyrics}.  Remember to rename both
 instances of all these names -- both the initial definition (the
-@code{melody = \relative c' @{ } part) and the name's use (in the
+@code{melody = \relative @{ } part) and the name's use (in the
 @code{\score} section).
 
 While we're doing this, let's change the cello part's staff --
@@ -2223,7 +2223,7 @@ different notes.
 @example
 \version @w{"@version{}"}
 
-sopranoMusic = \relative c' @{
+sopranoMusic = \relative @{
   \clef "treble"
   \key c \major
   \time 4/4
@@ -2234,7 +2234,7 @@ sopranoLyrics = \lyricmode @{
   Aaa Bee Cee Dee
 @}
 
-celloMusic = \relative @{
+celloMusic = \relative @{
   \clef "bass"
   \key c \major
   \time 4/4
@@ -2291,7 +2291,7 @@ This looks a bit messy; the indentation is messed up now.  That is
 easily fixed.  Here's the complete soprano and cello template.
 
 @lilypond[quote,verbatim,ragged-right,addversion]
-sopranoMusic = \relative c' {
+sopranoMusic = \relative {
   \clef "treble"
   \key c \major
   \time 4/4
@@ -2302,7 +2302,7 @@ sopranoLyrics = \lyricmode {
   Aaa Bee Cee Dee
 }
 
-celloMusic = \relative {
+celloMusic = \relative {
   \clef "bass"
   \key c \major
   \time 4/4
@@ -2348,44 +2348,44 @@ from Handel's Messiah:
 @lilypond[quote,ragged-right]
 global = { \key d \major \time 4/4 }
 
-sopranoMusic = \relative c'' {
+sopranoMusic = \relative {
   \clef "treble"
-  r4 d2 a4 | d4. d8 a2 | cis4 d cis2 |
+  r4 d''2 a4 | d4. d8 a2 | cis4 d cis2 |
 }
 sopranoWords = \lyricmode {
   Wor -- thy | is the lamb | that was slain |
 }
 
-altoMusic = \relative a' {
+altoMusic = \relative {
   \clef "treble"
-  r4 a2 a4 | fis4. fis8 a2 | g4 fis e2 |
+  r4 a'2 a4 | fis4. fis8 a2 | g4 fis e2 |
 }
 altoWords = \sopranoWords
 
-tenorMusic = \relative c' {
+tenorMusic = \relative {
   \clef "G_8"
-  r4 fis2 e4 | d4. d8 d2 | e4 a, cis2 |
+  r4 fis'2 e4 | d4. d8 d2 | e4 a, cis2 |
 }
 tenorWords = \sopranoWords
 
-bassMusic = \relative c' {
+bassMusic = \relative {
   \clef "bass"
-  r4 d2 cis4 | b4. b8 fis2 | e4 d a'2 |
+  r4 d'2 cis4 | b4. b8 fis2 | e4 d a'2 |
 }
 bassWords = \sopranoWords
 
-upper = \relative a' {
+upper = \relative {
   \clef "treble"
   \global
-  r4 <a d fis>2 <a e' a>4 |
+  r4 <a' d fis>2 <a e' a>4 |
   <d fis d'>4. <d fis d'>8 <a d a'>2 |
   <g cis g'>4 <a d fis> <a cis e>2 |
 }
 
-lower = \relative c, {
+lower = \relative {
   \clef "bass"
   \global
-  <d d'>4 <d d'>2 <cis cis'>4 |
+  <d, d'>4 <d d'>2 <cis cis'>4 |
   <b b'>4. <b' b'>8 <fis fis'>2 |
   <e e'>4 <d d'> <a' a'>2 |
 }
@@ -2587,39 +2587,39 @@ for the three bars of the example above gives:
 
 @lilypond[quote,verbatim,ragged-right,addversion]
 global = { \key d \major \time 4/4 }
-sopranoMusic = \relative c'' {
+sopranoMusic = \relative {
   \clef "treble"
-  r4 d2 a4 | d4. d8 a2 | cis4 d cis2 |
+  r4 d''2 a4 | d4. d8 a2 | cis4 d cis2 |
 }
 sopranoWords = \lyricmode {
   Wor -- thy | is the lamb | that was slain |
 }
-altoMusic = \relative a' {
+altoMusic = \relative {
   \clef "treble"
-  r4 a2 a4 | fis4. fis8 a2 | g4 fis fis2 |
+  r4 a'2 a4 | fis4. fis8 a2 | g4 fis fis2 |
 }
 altoWords = \sopranoWords
-tenorMusic = \relative c' {
+tenorMusic = \relative {
   \clef "G_8"
-  r4 fis2 e4 | d4. d8 d2 | e4 a, cis2 |
+  r4 fis'2 e4 | d4. d8 d2 | e4 a, cis2 |
 }
 tenorWords = \sopranoWords
-bassMusic = \relative c' {
+bassMusic = \relative {
   \clef "bass"
-  r4 d2 cis4 | b4. b8 fis2 | e4 d a'2 |
+  r4 d'2 cis4 | b4. b8 fis2 | e4 d a'2 |
 }
 bassWords = \sopranoWords
-upper = \relative a' {
+upper = \relative {
   \clef "treble"
   \global
-  r4 <a d fis>2 <a e' a>4 |
+  r4 <a' d fis>2 <a e' a>4 |
   <d fis d'>4. <d fis d'>8 <a d a'>2 |
   <g cis g'>4 <a d fis> <a cis e>2 |
 }
-lower = \relative c, {
+lower = \relative {
   \clef "bass"
   \global
-  <d d'>4 <d d'>2 <cis cis'>4 |
+  <d, d'>4 <d d'>2 <cis cis'>4 |
   <b b'>4. <b' b'>8 <fis fis'>2 |
   <e e'>4 <d d'> <a' a'>2 |
 }
@@ -2918,19 +2918,19 @@ is to add the music, and combine all the parts together.
   composer = "J S Bach"
 }
 keyTime = { \key c \minor \time 4/4 }
-ManualOneVoiceOneMusic = \relative g' {
-  g4 g f ees |
+ManualOneVoiceOneMusic = \relative {
+  g'4 g f ees |
   d2 c |
 }
-ManualOneVoiceTwoMusic = \relative c' {
-  ees16 d ees8~ 16 f ees d c8 d~ d c~ |
+ManualOneVoiceTwoMusic = \relative {
+  ees'16 d ees8~ 16 f ees d c8 d~ d c~ |
   8 c4 b8 c8. g16 c b c d |
 }
-ManualTwoMusic = \relative c' {
-  c16 b c8~ 16 b c g a8 g~ 16 g aes ees |
+ManualTwoMusic = \relative {
+  c'16 b c8~ 16 b c g a8 g~ 16 g aes ees |
   f16 ees f d g aes g f ees d ees8~ 16 f ees d |
 }
-PedalOrganMusic = \relative {
+PedalOrganMusic = \relative {
   r8 c16 d ees d ees8~ 16 a, b g c b c8 |
   r16 g ees f g f g8 c,2 |
 }
@@ -2984,7 +2984,7 @@ Music Glossary:
 By this point, you've seen this kind of thing:
 
 @lilypond[quote,verbatim,ragged-right]
-hornNotes = \relative c'' { c4 b dis c }
+hornNotes = \relative { c''4 b dis c }
 
 \score {
   {
@@ -2996,8 +2996,8 @@ hornNotes = \relative c'' { c4 b dis c }
 You may even realize that this could be useful in minimalist music:
 
 @lilypond[quote,verbatim,ragged-right]
-fragmentA = \relative c'' { a4 a8. b16 }
-fragmentB = \relative c'' { a8. gis16 ees4 }
+fragmentA = \relative { a'4 a8. b16 }
+fragmentB = \relative { a'8. gis16 ees4 }
 
 violin = \new Staff {
   \fragmentA \fragmentA |
@@ -3014,21 +3014,21 @@ violin = \new Staff {
 However, you can also use these variables (also known as
 macros, or user-defined commands) for tweaks:
 
-@c TODO Avoid padtext - not needed with skylining
 @lilypond[quote,verbatim,ragged-right]
 dolce = \markup { \italic \bold dolce }
 
-padText = { \once \override TextScript.padding = #5.0 }
+centreText = { \once \override TextScript.self-alignment-X = #CENTER }
+
 fthenp =_\markup {
   \dynamic f \italic \small { 2nd } \hspace #0.1 \dynamic p
 }
 
-violin = \relative c'' {
+violin = \relative {
   \repeat volta 2 {
-    c4._\dolce b8 a8 g a b |
-    \padText
-    c4.^"hi there!" d8 e' f g d |
-    c,4.\fthenp b8 c4 c-. |
+    c''4._\dolce b8 a8 g a b |
+    \centreText
+    c4.^"hi there!" d8 e f g d |
+    c4.\fthenp b8 c4 c-. |
   }
 }
 
@@ -3036,7 +3036,6 @@ violin = \relative c'' {
   {
     \violin
   }
-  \layout { ragged-right = ##t }
 }
 @end lilypond
 
@@ -3048,12 +3047,12 @@ variables.  It's a lot harder to read, especially
 the last line.
 
 @example
-violin = \relative c'' @{
+violin = \relative @{
   \repeat volta 2 @{
-    c4._\markup @{ \italic \bold dolce @} b8 a8 g a b |
-    \once \override TextScript.padding = #5.0
-    c4.^"hi there!" d8 e' f g d |
-    c,4.\markup @{
+    c''4._\markup @{ \italic \bold dolce @} b8 a8 g a b |
+    \once \override TextScript.self-alignment-X = #CENTER
+    c4.^"hi there!" d8 e f g d |
+    c4._\markup @{
       \dynamic f \italic \small @{ 2nd @} \hspace #0.1 \dynamic p
     @}
     b8 c4 c-. |
@@ -3062,9 +3061,9 @@ violin = \relative c'' @{
 @end example
 
 So far we've seen static substitution -- when LilyPond
-sees @code{\padText}, it replaces it with the stuff that
+sees @code{\centreText}, it replaces it with the stuff that
 we've defined it to be (ie the stuff to the right of
-@code{padtext=}).
+@code{centreText=}).
 
 LilyPond can handle non-static substitution, too (you
 can think of these as functions).
@@ -3072,14 +3071,14 @@ can think of these as functions).
 @lilypond[quote,verbatim,ragged-right]
 padText =
 #(define-music-function
-     (parser location padding)
+     (padding)
      (number?)
    #{
      \once \override TextScript.padding = #padding
    #})
 
-\relative c'' {
-  c4^"piu mosso" b a b
+\relative {
+  c''4^"piu mosso" b a b
   \padText #1.8
   c4^"piu mosso" b a b
   \padText #2.6
@@ -3110,7 +3109,7 @@ suppose that the file @file{horn-music.ly} contains the following part
 of a horn/@/bassoon duo
 
 @example
-hornNotes = \relative @{
+hornNotes = \relative @{
   \time 2/4
   r4 f8 a | cis4 f | e4 d |
 @}
@@ -3147,7 +3146,7 @@ tuning of a normal French Horn in@tie{}F.  The transposition can be seen
 in the following output
 
 @lilypond[quote,ragged-right]
-\transpose f c' \relative {
+\transpose f c' \relative {
   \time 2/4
   r4 f8 a | cis4 f | e4 d |
 }
@@ -3165,22 +3164,18 @@ takes 3@tie{}measures in 2/4 time
 R2*3
 @end example
 
-When printing the part, multi-rests
-must be condensed.  This is done by setting a run-time variable
+When printing the part, multi-measure rests must be compressed.  There
+is a music function available to do this:
 
 @example
-\set Score.skipBars = ##t
+\compressMMRests @{ ... @}
 @end example
 
-@noindent
-This command sets the property @code{skipBars} in the
-@code{Score} context to true (@code{##t}).  Prepending the rest and
-this option to the music above, leads to the following result
+Applying this to @code{hornNotes} gives:
 
 @lilypond[quote,ragged-right]
-\transpose f c' \relative c {
+\compressMMRests \transpose f c' \relative {
   \time 2/4
-  \set Score.skipBars = ##t
   R2*3 |
   r4 f8 a | cis4 f | e4 d |
 }
@@ -3205,7 +3200,7 @@ that the other voice is in @code{bassoonNotes} in the file
 leading to
 
 @lilypond[quote,ragged-right]
-\relative <<
+\relative <<
   \new Staff {
     \clef "treble"
     \time 2/4
@@ -3221,5 +3216,13 @@ leading to
 >>
 @end lilypond
 
+@seealso
+Learning Manual:
+@ref{Organizing pieces with variables}.
 
+Notation Reference:
+@ruser{Transpose},
+@ruser{Writing parts},
+@ruser{Full measure rests},
+@ruser{Including LilyPond files}.