Some questions that have been answered before.
+=head2 Installing
+
+Q: I get all kinds of errors while compiling F<parser.cc>
+
+A: LilyPond uses features of bison version 1.25. Please confirm that
+you are using a version 1.25 or better, that is B<GNU> bison
+B<1.25>. Don't forget to do "make clean" after installing it. Don't
+forget to remove the stale F<bison.simple> as well.
+
+If the problem persists, then please mail me.
+
+Q: Some of your neat scripts fail, what directories do you use:
+
+A: [This only applies if you don't do C<make install>, and develop out
+of the source directory]
+
+ ~/something/
+
+which contains:
+
+ lilypond/ # the directory as unpacked from the tarball
+ releases/ # directory for .tar.gz releases
+ patches/ # directory for patches between different releases
+ test/
+
+~/something/lilypond/bin is in the PATH, and contains symlinks to the
+compiled executables.
+
+If you don't use patches, you'd probably want to symlink
+
+ lilypond -> lilypond-x.y.z
+
=head2 Language: mudela
Q: Why can't you type C<#c> in stead of C<cis> ?
cis cis
#c #c
+Why, you might ask? Because independently of how it was written, you
+would say that you are playing and reading "two C-sharp" notes.
+
+
+Q: What is C<cis> anyway
+
+A: C<cis> is the dutch naming for C-sharp. The notes are named
+a, b,.., g. The suffix -is means sharp, and -es flat. This system is
+common in a number of languages (such as swedish, dutch, german.)
+Certain other languages (such as English, French and Italian) just add
+the word for "sharp" to the notename.
+
+We chose the Dutch system, because we're dutch. You are free to chose
+whatever names you like; they are user definable.
Q: I can type
to make a few chords, but why do I have to type
- < { a() e } { c () g } >
+ < { a~ e } { c ~ g } >
instead of
- <a( c(> <)e )g>
+ <a~ c~> <e g>
-to generate slurs between the chords?
+to generate ties between the chords?
A: When you type
< { a } { c } > < { e } { g } >
-Slurs have to be confined to `voices', and the a and the e are in
+Ties have to be confined to `voices', and the a and the e are in
different {} blocks, so they are in different voices. You should view
the desired construct as a "generalised chord" (two voices stacked
vertically). It might help you visualise this by using the following
formatting:
- < { a () e }
- { c () g }
+ < { a ~ e }
+ { c ~ g }
>
Q: and where do the beams come into this picture?
A: Beams are voicegroup-wide, and may be entered in any part of the
voicegroup:
- < { [a () e] } { c () g } >
- < { [a () e } { c () g] } >
- < { [a () e] } { [c () g] } >
+ < { [a ~ e] } { c ~ g } >
+ < { [a ~ e } { c ~ g] } >
+ < { [a ~ e] } { [c ~ g] } >
These all give the same result.
a()a()a
-Q: Why shouldn't I put all commands (\clef, \meter) inside the music?
-
-A: You should do what you like, but at some time we will enable
-quoting of music ("Stichnoten"). Besides if you are going to type an
-orchestral score, then you'd probably want to enter most of the meter,
-repeat commands only once.
-
Q: I want to insert some TeX commands
A: You shouldn't: it's against LilyPond philosophy to have typesetting
translated into printable items is complex: it is not always possible
to associate one Request with one Item or Spanner.
+As a further notice, we want to move away from TeX (and perhaps
+output PostScript or render to an X window too), so using TeX will
+make sources non-portable at some time.
=head2 Miscellaneous
+Q: Do you support pop songs (chords, single staff, lyrics)?
+
+A: Yes, see the F<twinkle-pop> example
+
+Q: Do you support guitar chord diagrams?
+
+A: No, not yet. We ourselves don't play guitar, and don't know the
+fine points of this notation. We would welcome anyone who could give
+this a try.
+
+Q: Do you support TAB notation
+
+A: No. The same as for the previous question goes, but TAB is a lot
+more work than diagrams (TAB needs modification of Parser, Lexer,
+Staff, Notehead, Stem code and all the code that creates these graphic
+elements.)
+
+Q: How do I change the TeX layout?
+
+A: See F<lilyponddefs.tex>, it has some comments.
+
+Q: How do I learn the C++ code?
+
+A: The entry point is in C<main()>. Good luck. :-)
+
+Seriously, read, reread and reread lilygut and CodingStyle, and
+just start anywhere.
+
+Anywhere? Well, most of the comment doco are in the header files, so
+your best bet would be C<less lily/include/*.hh>. Some of the most
+important data-structures are to be found in:
+
+ - p-col.hh
+ - *request.hh
+ - engraver.hh
+ - performer.hh
+ - translator.hh
+ - score-elem.hh
+ - music.hh
+ - music-list.hh
+ - music-iterator.hh
+ - item.hh
+ - spanner.hh
+
+
Q: Why GPL?
A: Yes.
A: If it is reasonable, I'll add XXXX to the TODO list. In general
finding a cute syntax (such as YYYY) isn't very hard. The complicated
-issue how to adapt the internals to do XXXX. The parser is really a
+issue how to adapt the internals to do XXXX. The parser is really a
simple front end to the complicated internals.
-Q: Why do I need g++ >= 2.7?
-A: By using g++, GNU LilyPond is portable to all platforms which support
-g++ (there are quite a few). Not having to support other compilers
-saves us a I<lot> of trouble. GNU LilyPond and FlowerLib use:
+Q: I want to implement XXXX! Should I do this?
-=over 4
+A: There might be better ways of doing XXXX, so it's a good thing to
+ask about this before you start hacking. If you want to keep in touch
+with current developments, you should subscribe to the mailing list
+(see the "links" section of the documentation).
-=item *
-builtin bool
+Q: I want to implement XXXX! How should I do this?
-=item *
+A: Your best bet of getting me to include code, is to present it as a
+"fait accompli", ie., to send me a patch.
-64 bit integral type long long
-=item *
-
-typeof
+Q: Why do I need g++ >= 2.7?
-=item *
+A: By using g++, GNU LilyPond is portable to all platforms which support
+g++ (there are quite a few). Not having to support other compilers
+saves us a I<lot> of trouble.
-operator <?, operator >?
+=head2 Running
-=item *
+Q: I don't get midi-output, even if I use B<-M>
-the new for-scope
+A: Your \score should include a \midi block, eg.
-=item *
+ \score {
+ \melodic { c4 c g g }
+ \paper {}
+ \midi {
+ \output "myfile.mid";
+ \tempo 4=70;
+ }
-class Rational (libg++)
+The B<-M> option was added to LilyPond because processing the \paper
+block is so slow.
-=back
+Q: A lot of musical stuff doesn't make it to the MIDI file (dynamics,
+articulation, etc).
-=head2 Running
+A: The MIDI output was originally put in as a proof that MIDI could be
+done, and as a method of proof"reading" the input. The MIDI support
+is by no means finished.
Q: I get
A.0: Reconsider. Try Linux. It's fun!
-A.1: Currently (patchlevel 27), GNU LilyPond (and flowerLib) compiles, links
-and runs on windhoos-nt, using the cygnus gnu port (release b17.1).
+A.1: Currently (0.0.27), GNU LilyPond (and flowerLib) compiles,
+links and runs on Windows-nt, using Cygnus' gnu port (release b17.1).
I (JCN) only had to make a minor workaround for missing library calls.
-Have a look at http://www.cygnus.com/gnu-win32. To make GNU LilyPond type
-C<make $OSTYPE>. (I am not promising to maintain this platform, it is just
-that when having to use doze, i-m sometimes too lazy to reboot.)
+Have a look at http://www.cygnus.com/gnu-win32. To make GNU LilyPond
+type C<make>. (I am not promising to maintain this platform, it is just
+that when forced into doze, i'm sometimes too lazy to reboot.)
-A.2: I haven't had time to find a GCC crosscompiler (I<with> g++ and
-libg++, mind you) to DOS/win (in rpm, please :).
+A.2: I haven't had time to find a Linux GCC crosscompiler (I<with> g++
+and libg++, mind you) to DOS/Windows (in rpm, please :-)
+A.3: If you are knowledgeable enough to make w32 compiles from time to
+time, please do so! We want to keep away from w32 as far as possible.
-Q: I-m dozed enough to run the (sometimes bit stale) .exe-s you distribute.
+Q: I just love to blindly run the (sometimes bit stale) .exe's you distribute.
Why do i need cygwin.dll?
-A: It-s all in this cut-n-paste:
+A: It's all in this cut-n-paste:
Minimalist GNU-Win32 Readme
version 0.1.3
projects / lilypond.git / blobdiff