Guide, node Updating translation committishes.
@end ignore
-@c \version "2.17.5"
+@c \version "2.19.40"
@c Translators: Till Paala
auch notiert werden, können allerdings nur als Noten mit Balken auftreten.
@c Two 64th notes are needed to obtain beams
-@lilypond[quote,verbatim,relative=2]
-\time 8/1
-c\longa c\breve c1 c2
-c4 c8 c16 c32 c64 c128 c128
+@lilypond[quote,verbatim]
+\relative {
+ \time 8/1
+ c''\longa c\breve c1 c2
+ c4 c8 c16 c32 c64 c128 c128
+}
@end lilypond
Hier die selben Notendauern ohne die Balken.
@c not strictly "writing rhythms"; more of a "displaying" thing,
@c but it's ok here. -gp
-@lilypond[quote,verbatim,relative=2]
-\time 8/1
-\autoBeamOff
-c\longa c\breve c1 c2
-c4 c8 c16 c32 c64 c128 c128
+@lilypond[quote,verbatim]
+\relative {
+ \time 8/1
+ \autoBeamOff
+ c''\longa c\breve c1 c2
+ c4 c8 c16 c32 c64 c128 c128
+}
@end lilypond
Eine Note mit der vierfachen Dauer einer Brevis kann mit dem
wird die Dauer der vorhergehenden Note eingesetzt. Der Standardwert
für die erste Note ist eine Viertel.
-@lilypond[quote,verbatim,relative=2]
-a a a2 a a4 a a1 a
+@lilypond[quote,verbatim]
+\relative { a' a a2 a a4 a a1 a }
@end lilypond
@funindex .
(@code{.}) hinter die Zahl der Dauer gesetzt werden. Zwei Punkte
ergeben eine doppelte Punktierung, usw.
-@lilypond[quote,verbatim,relative=2]
-a4 b c4. b8 a4. b4.. c8.
+@lilypond[quote,verbatim]
+\relative { a'4 b c4. b8 a4. b4.. c8. }
@end lilypond
Manche Notenlängen können nicht mit binären Dauern und Punkten
@snippets
@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
-{alternative-breve-note.ly}
+{alternative-breve-notes.ly}
@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
{changing-the-number-of-augmentation-dots-per-note.ly}
einzelnen Note ist also 2/3 der notierten Länge.
@lilypond[quote,verbatim,relative=2]
-a2 \times 2/3 { b4 b b }
-c4 c \times 2/3 { b4 a g }
+a2 \tuplet 3/2 { b4 b b }
+c4 c \tuplet 3/2 { b4 a g }
@end lilypond
@cindex Triolenklammer, Platzierung
N-tolen können ineinander geschachtelt werden:
-@lilypond[quote,verbatim,relative=2]
-\autoBeamOff
-c4 \times 4/5 { f8 e f \times 2/3 { e[ f g] } } f4
+@lilypond[quote,verbatim]
+\relative {
+ \autoBeamOff
+ c''4 \tuplet 5/4 { f8 e f \tuplet 3/2 { e[ f g] } } f4
+}
@end lilypond
Wenn man die Eigenschaften von N-tolen verändern will, die zum
@funindex tupletSpannerDuration
@lilypondfile[verbatim,quote,ragged-right,texidoc,doctitle]
-{entering-several-tuplets-using-only-one--times-command.ly}
+{entering-several-tuplets-using-only-one--tuplet-command.ly}
@cindex Triolennummer, Änderung
Im nächsten Beispiel nehmen die drei ersten Noten genau zwei Schläge ein,
aber es wird keine Triolenklammer über ihnen ausgegeben.
-@lilypond[quote,relative=2,verbatim]
-\time 2/4
-% Alter durations to triplets
-a4*2/3 gis a
-% Normal durations
-a4 a
-% Double the duration of chord
-<a d>4*2
-% Duration of quarter, appears like sixteenth
-b16*4 c4
+@lilypond[quote,verbatim]
+\relative {
+ \time 2/4
+ % Alter durations to triplets
+ a'4*2/3 gis a
+ % Normal durations
+ a4 a
+ % Double the duration of chord
+ <a d>4*2
+ % Duration of quarter, appears like sixteenth
+ b16*4 c4
+}
@end lilypond
Die Dauer von unsichtbaren Pausen kann auch mit einem Faktor
Tilde @code{~} (AltGr++) notiert.
@lilypond[quote,verbatim,relative=2]
-a2 ~ a
+a2 ~ 2
@end lilypond
Bindebögen werden eingesetzt, wenn die Note entweder über eine
inneren Unterteilungen von Takten hinüberreichen:
@lilypond[quote]
-\relative c' {
- r8 c8 ~ c2 r4 |
- r8^"not" c2 ~ c8 r4
+\relative {
+ r8 c'8 ~ 2 r4 |
+ r8^"not" c2 ~ 8 r4
}
@end lilypond
man die Musik ausklingen lassen soll. Sie werden in der Klavier-, Harfen-,
anderer Saiteninstrument- und Schlagzeugnotation verwendet. Sie können folgendermaßen notiert werden:
-@lilypond[quote,verbatim,relative=1]
-<c f g>1\laissezVibrer
+@lilypond[quote,verbatim,fragment]
+<c' f' g'>1\laissezVibrer
@end lilypond
@cindex ties, placement
@lilypond[quote, verbatim, relative=1]
\tieDotted
-c2 ~ c
+c2 ~ 2
\tieDashed
-c2 ~ c
+c2 ~ 2
\tieHalfDashed
-c2 ~ c
+c2 ~ 2
\tieHalfSolid
-c2 ~ c
+c2 ~ 2
\tieSolid
-c2 ~ c
+c2 ~ 2
@end lilypond
Eigene Strichelungsmuster können definiert werden:
@lilypond[quote, verbatim, relative=1]
\tieDashPattern #0.3 #0.75
-c2 ~ c
+c2 ~ 2
\tieDashPattern #0.7 #1.5
-c2 ~ c
+c2 ~ 2
\tieSolid
-c2 ~ c
+c2 ~ 2
@end lilypond
Die Definition von Muster für die Strichelung der Bindebögen hat
@var{layer} (Ebene) kann verhindert werden, dass Bindebögen mit anderen
Objekten im Notensystem zusammenstoßen.
-@lilypond[verbatim,quote,ragged-right,relative=2]
-\override Tie #'layer = #-2
-\override Staff.TimeSignature #'layer = #-1
-\override Staff.KeySignature #'layer = #-1
-\override Staff.TimeSignature #'whiteout = ##t
-\override Staff.KeySignature #'whiteout = ##t
-b2 b~
-\time 3/4
-\key a \major
-b r4
+@lilypond[verbatim,quote,ragged-right]
+\relative {
+ \override Tie.layer = #-2
+ \override Staff.TimeSignature.layer = #-1
+ \override Staff.KeySignature.layer = #-1
+ \override Staff.TimeSignature.whiteout = ##t
+ \override Staff.KeySignature.whiteout = ##t
+ b'2 b~
+ \time 3/4
+ \key a \major
+ b r4
+}
@end lilypond
@predefined
@c \time 16/1 is used to avoid spurious bar lines
@c and long tracts of empty measures
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
\new Staff {
% These two lines are just to prettify this example
\time 16/1
- \override Staff.TimeSignature #'stencil = ##f
+ \omit Staff.TimeSignature
% Print a maxima rest, equal to four breves
r\maxima
% Print a longa rest, equal to two breves
sehr viel einfacher, da die Formatierungsfunktion zur automatischen
Auflösung von Zusammenstößen diese Pausen nicht mit einbezieht.
-@lilypond[quote,verbatim,relative=2]
-a4\rest d4\rest
+@lilypond[quote,verbatim]
+\relative { a'4\rest d4\rest }
@end lilypond
@snippets
der Befehl @code{\skip} benutzt werden. @code{\skip} benötigt eine
explizite Dauerangabe.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
{
- a2 \skip2 a2 a2
+ a'2 \skip2 a'2 a'2
}
\new Lyrics {
\lyricmode {
Weil @code{\skip} ein Befehl ist, wirkt er sich nicht auf die Dauer
der folgenden Noten aus, anders als@tie{}@code{s}.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
{
- \repeat unfold 8 { a4 }
+ \repeat unfold 8 { a'4 }
}
{
- a4 \skip 2 a |
- s2 a
+ a'4 \skip 2 a' |
+ s2 a'
}
>>
@end lilypond
Die Platzhalterpause mit @code{s} erstellt @code{Staff}- und
@code{Voice}-Kontext, wenn es erforderlich ist, genauso wie Noten und Pausen.
-@lilypond[quote,verbatim,relative=2]
-s1 s s
+@lilypond[quote,verbatim]
+{ s1 s s }
@end lilypond
Der Überspringungsbefehl (@code{\skip}) ist einfach ein leerer Platzhalter.
Durch ihn wird überhaupt nichts gesetzt, auch keine transparenten Objekte.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
% This is valid input, but does nothing
-\skip 1 \skip1 \skip 1
+{ \skip 1 \skip1 \skip 1 }
@end lilypond
@seealso
Eine Ganztaktpause wird abhängig von der Taktart entweder als
Ganze oder Brevis-Pause gesetzt, zentriert im Takt.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 4/4
R1 |
\time 6/4
nicht ignoriert werden. Siehe auch das folgende Beispiel.
}
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
% This fails, as the wrong object name is specified
-\override TextScript #'padding = #5
+\override TextScript.padding = #5
R1^"wrong"
% This is the correct object name to be specified
-\override MultiMeasureRestText #'padding = #5
+\override MultiMeasureRestText.padding = #5
R1^"right"
@end lilypond
ausgegeben. Dieses Verhalten kann verändert werden, siehe
@ref{Sichtbarkeit von Objekten}.
-@lilypond[quote,verbatim,relative=2]
-\time 2/4
-c2 c
-\break
-c c
-\break
-\time 4/4
-c c c c
+@lilypond[quote,verbatim]
+\relative c'' {
+ \time 2/4
+ c2 c
+ \break
+ c c
+ \break
+ \time 4/4
+ c c c c
+}
@end lilypond
@funindex \numericTimeSignature
Das Symbol für die Taktarten 2/2 und 4/4 kann in ein Zahlensymbol
umgewandelt werden:
-@lilypond[quote,verbatim,relative=2]
-% Default style
-\time 4/4 c1
-\time 2/2 c1
-% Change to numeric style
-\numericTimeSignature
-\time 4/4 c1
-\time 2/2 c1
-% Revert to default style
-\defaultTimeSignature
-\time 4/4 c1
-\time 2/2 c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ % Default style
+ \time 4/4 c1
+ \time 2/2 c1
+ % Change to numeric style
+ \numericTimeSignature
+ \time 4/4 c1
+ \time 2/2 c1
+ % Revert to default style
+ \defaultTimeSignature
+ \time 4/4 c1
+ \time 2/2 c1
+}
@end lilypond
Symbole für Modus und Proprietas der mensuralen Notation
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 { c8 } |
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
c8^\markup {"Beamed (2 2)"}
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
c8^\markup {"Beamed (3 1)"}
@lilypond[quote,verbatim]
\score{
- \relative c' {
- \repeat unfold 8 { c8 } |
+ \relative {
+ \repeat unfold 8 { c'8 } |
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 { c8 } |
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(3 1) % beatStructure
+ 3,1 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 {c''8}
\overrideTimeSignatureSettings
4/4 % timeSignatureFraction
1/4 % baseMomentFraction
- #'(1 3) % beatStructure
+ 1,3 % beatStructure
#'() % beamExceptions
\time 4/4
\repeat unfold 8 {c''8}
Eine Metronomanweisung wird wie folgt erstellt:
-@lilypond[verbatim,quote,relative=1]
-\tempo 4 = 120
-c2 d
-e4. d8 c2
+@lilypond[verbatim,quote]
+\relative {
+ \tempo 4 = 120
+ c'2 d
+ e4. d8 c2
+}
@end lilypond
Metronombezeichnungen können auch für einen Zahlenbereich notiert werden:
-@lilypond[verbatim,quote,relative=1]
-\tempo 4 = 40 ~ 46
-c4. e8 a4 g
-b,2 d4 r
+@lilypond[verbatim,quote]
+\relative {
+ \tempo 4 = 40 - 46
+ c'4. e8 a4 g
+ b,2 d4 r
+}
@end lilypond
Anstelle dessen kann auch Text als Argument angegeben werden:
-@lilypond[verbatim,quote,relative=2]
-\tempo "Allegretto"
-c4 e d c
-b4. a16 b c4 r4
+@lilypond[verbatim,quote]
+\relative {
+ \tempo "Allegretto"
+ c''4 e d c
+ b4. a16 b c4 r4
+}
@end lilypond
Wenn eine Metronombezeichnung und Text kombiniert wird, wird
die Metronombezeichnung automatisch in Klammern gesetzt:
-@lilypond[verbatim,quote,relative=2]
-\tempo "Allegro" 4 = 160
-g4 c d e
-d4 b g2
+@lilypond[verbatim,quote]
+\relative {
+ \tempo "Allegro" 4 = 160
+ g'4 c d e
+ d4 b g2
+}
@end lilypond
Der Text kann ein beliebiges Textbeschriftungsobjekt sein:
-@lilypond[verbatim,quote,relative=2]
-\tempo \markup { \italic Faster } 4 = 132
-a8-. r8 b-. r gis-. r a-. r
+@lilypond[verbatim,quote]
+\relative {
+ \tempo \markup { \italic Faster } 4 = 132
+ a'8-. r8 b-. r gis-. r a-. r
+}
@end lilypond
Eine Metronombezeichnung in Klammern ohne Text kann erstellt
werden, indem eine leere Zeichenkette hinzugefügt wird:
-@lilypond[verbatim,quote,relative=2]
-\tempo "" 8 = 96
-d4 g e c
+@lilypond[verbatim,quote]
+\relative {
+ \tempo "" 8 = 96
+ d''4 g e c
+}
@end lilypond
Die @var{Dauer} kan ein beliebiger Wert kleiner als der vollständige
Takt sein.
-@lilypond[quote,verbatim,relative=1]
-\time 3/4
-\partial 4.
-r4 e8 | a4 c8 b c4 |
+@lilypond[quote,verbatim]
+\relative {
+ \time 3/4
+ \partial 4.
+ r4 e'8 | a4 c8 b c4 |
+}
@end lilypond
@code{\partial @var{Dauer}} kann auch folgendermaßen geschrieben werden:
@lilypond[quote,verbatim,relative=1]
\time 3/4
-\set Timing.measurePosition = #(ly:make-moment -1 8)
+\set Timing.measurePosition = #(ly:make-moment -1/8)
e8 | a4 c8 b c4 |
@end lilypond
\time 6/8
\partial 8
e8 | a4 c8 b[ c b] |
-\set Timing.measurePosition = #(ly:make-moment -1 4)
+\set Timing.measurePosition = #(ly:make-moment -1/4)
r8 e,8 | a4 c8 b[ c b] |
@end lilypond
@code{\cadenzaOn}, um dann wieder zum normalen Verhalten mit
@code{\cadenzaOff} zurückzukehren.
-@lilypond[verbatim,relative=2,quote]
-c4 d e d
-\cadenzaOn
-c4 c d8[ d d] f4 g4.
-\cadenzaOff
-\bar "|"
-d4 e d c
+@lilypond[verbatim,quote]
+\relative c'' {
+ c4 d e d
+ \cadenzaOn
+ c4 c d8[ d d] f4 g4.
+ \cadenzaOff
+ \bar "|"
+ d4 e d c
+}
@end lilypond
Taktnummerierung wird am Ende der Kadenz wieder aufgenommen:
@lilypond[verbatim,relative=2,fragment]
% Show all bar numbers
-\override Score.BarNumber #'break-visibility = #all-visible
+\override Score.BarNumber.break-visibility = #all-visible
c4 d e d
\cadenzaOn
c4 c d8[ d d] f4 g4.
Automatische Bebalkung wird durch @code{\cadenzeOn} ausgestellt. Darum müssen
alle Balken in Kadenzen manuell eingegeben werden (siehe @ref{Manuelle Balken}).
-@lilypond[verbatim,relative=2,quote]
-\repeat unfold 8 { c8 }
-\cadenzaOn
-cis8 c c c c
-\bar"|"
-c8 c c
-\cadenzaOff
-\repeat unfold 8 { c8 }
+@lilypond[verbatim,quote]
+\relative {
+ \repeat unfold 8 { c''8 }
+ \cadenzaOn
+ cis8 c c c c
+ \bar"|"
+ c8 c c
+ \cadenzaOff
+ \repeat unfold 8 { c8 }
+}
@end lilypond
Diese vordefinierten Befehle wirken sich auf alle Systeme in der
auswirkt.
@lilypond[quote,verbatim]
-\relative c' <<
+\relative <<
\new Staff {
\time 3/4
- c4 c c |
+ c'4 c c |
c4 c c |
}
\new Staff {
\scaleDurations 3/5 {
\repeat unfold 2 { c8[ c c] }
\repeat unfold 2 { c8[ c] } |
- c4. c4. \times 2/3 { c8[ c c] } c4
+ c4. c4. \tuplet 3/2 { c8[ c c] } c4
}
}
>>
% Now each staff has its own time signature.
-\relative c' <<
+\relative <<
\new Staff {
\time 3/4
- c4 c c |
+ c'4 c c |
c4 c c |
}
\new Staff {
Zahlen die Zähler sind.
@lilypond[quote,verbatim]
-\relative c' {
+\relative {
\compoundMeter #'((2 2 2 8))
- \repeat unfold 6 c8 \repeat unfold 12 c16
+ \repeat unfold 6 c'8 \repeat unfold 12 c16
}
@end lilypond
entsprechend der Werte angepasst.
@lilypond[quote,verbatim]
-\relative c' {
+\relative {
\compoundMeter #'((1 4) (3 8))
- \repeat unfold 5 c8 \repeat unfold 10 c16
+ \repeat unfold 5 c'8 \repeat unfold 10 c16
}
-\relative c' {
+\relative {
\compoundMeter #'((1 2 3 8) (3 4))
- \repeat unfold 12 c8
+ \repeat unfold 12 c'8
}
@end lilypond
Noten und Pausen, die über die Taktlinie dauern, aufgeteilt; Noten
werden auch übergebunden.
-@lilypond[quote,verbatim,relative=1]
+@lilypond[quote,verbatim]
\new Voice \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
\remove "Rest_engraver"
\consists "Completion_rest_engraver"
}
-
-{ c2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 r1*2 }
+\relative {
+ c'2. c8 d4 e f g a b c8 c2 b4 a g16 f4 e d c8. c2 r1*2
+}
@end lilypond
Dieser Engraver teilt alle Noten und Pausen
auf eine Linie reduziert und das System hat auch nur eine einzige
Linie.
-@lilypond[quote,relative=1,verbatim]
+@lilypond[quote,verbatim]
<<
\new RhythmicStaff {
- \new Voice = "myRhythm" {
+ \new Voice = "myRhythm" \relative {
\time 4/4
- c4 e8 f g2
+ c'4 e8 f g2
r4 g g f
g1
}
@funindex \autoBeamOff
@funindex autoBeamOff
-@lilypond[quote,verbatim,relative=2]
-\time 2/4 c8 c c c
-\time 6/8 c8 c c c8. c16 c8
+@lilypond[quote,verbatim]
+\relative c'' {
+ \time 2/4 c8 c c c
+ \time 6/8 c8 c c c8. c16 c8
+}
@end lilypond
Wenn diese automatischen Entscheidungen nicht gut genug sind, können
aufgehoben werden und mit dem Befehl @code{\autoBeamOn} wieder
eingeschaltet werden.
-@lilypond[quote,relative=1,verbatim]
-c4 c8 c8. c16 c8. c16 c8
-\autoBeamOff
-c4 c8 c8. c16 c8.
-\autoBeamOn
-c16 c8
+@lilypond[quote,verbatim]
+\relative c' {
+ c4 c8 c8. c16 c8. c16 c8
+ \autoBeamOff
+ c4 c8 c8. c16 c8.
+ \autoBeamOn
+ c16 c8
+}
@end lilypond
@cindex Melismen, Balken
@lilypond[quote,relative=2,verbatim]
\time 5/16
c16^"default" c c c c |
-\set Timing.beatStructure = #'(2 3)
+\set Timing.beatStructure = 2,3
c16^"(2+3)" c c c c |
-\set Timing.beatStructure = #'(3 2)
+\set Timing.beatStructure = 3,2
c16^"(3+2)" c c c c |
@end lilypond
\time 4/4
a8^"default" a a a a a a a
-\set Timing.baseMoment = #(ly:make-moment 1 4)
-\set Timing.beatStructure = #'(1 1 1 1)
+\set Timing.baseMoment = #(ly:make-moment 1/4)
+\set Timing.beatStructure = 1,1,1,1
a8^"no change" a a a a a a a
\set Timing.beamExceptions = #'()
-\set Timing.baseMoment = #(ly:make-moment 1 4)
-\set Timing.beatStructure = #'(1 1 1 1)
+\set Timing.baseMoment = #(ly:make-moment 1/4)
+\set Timing.beatStructure = 1,1,1,1
a8^"changed" a a a a a a a
@end lilypond
@lilypond[quote, verbatim,relative=1]
\new Staff <<
\time 7/8
- \set Staff.beatStructure = #'(2 3 2)
+ \set Staff.beatStructure = 2,3,2
\new Voice = one {
- \relative c'' {
- a8 a a a a a a
+ \relative {
+ a'8 a a a a a a
}
}
\new Voice = two {
- \relative c' {
+ \relative {
\voiceTwo
- \set Voice.beatStructure = #'(1 3 3)
- f8 f f f f f f
+ \set Voice.beatStructure = 1,3,3
+ f'8 f f f f f f
}
}
>>
% Context applied to Voice by dafault -- does not work correctly
% Because of autogenerated voices, all beating will
% be at baseMoment (1 . 8)
-\set beatStructure = #'(3 1 1 2)
+\set beatStructure = 3,1,1,2
<< {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
% Works correctly with context Staff specified
-\set Staff.beatStructure = #'(3 1 1 2)
+\set Staff.beatStructure = 3,1,1,2
<< {a8 a a a16 a a a a8 a} \\ {f4. f8 f f f} >>
@end lilypond
@lilypond[quote,verbatim,relative=2]
\time 5/8
-\set Timing.baseMoment = #(ly:make-moment 1 16)
-\set Timing.beatStructure = #'(7 3)
+\set Timing.baseMoment = #(ly:make-moment 1/16)
+\set Timing.beatStructure = 7,3
\repeat unfold 10 { a16 }
@end lilypond
@lilypond[quote,relative=2,verbatim]
\time 3/16
-\set Timing.beatStructure = #'(2 1)
+\set Timing.beatStructure = 2,1
\set Timing.beamExceptions =
#'( ;start of alist
(end . ;entry for end of beams
definiert wird, werden die automatischen Bebalkungsregeln für den
@code{Timing}-Kontext auf den Standard zurückgesetzt.
-@lilypond[quote,verbatim,relative=2]
-\time 6/8
-\repeat unfold 6 { a8 }
-% group (4 + 2)
-\set Timing.beatStructure = #'(4 2)
-\repeat unfold 6 { a8 }
-% go back to default behavior
-\time 6/8
-\repeat unfold 6 { a8 }
+@lilypond[quote,verbatim]
+\relative a' {
+ \time 6/8
+ \repeat unfold 6 { a8 }
+ % group (4 + 2)
+ \set Timing.beatStructure = 4,2
+ \repeat unfold 6 { a8 }
+ % go back to default behavior
+ \time 6/8
+ \repeat unfold 6 { a8 }
+}
@end lilypond
Die automatischen Standardeinstellungen für die Bebalkung einer
Die @code{beamExceptions}-Regel kann die @code{beatStructure}-Einstellung
überschreiben, wenn @code{beamExceptions} nicht zurückgesetzt wird:
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim,fragment]
\time 4/4
-\set Timing.baseMoment = #(ly:make-moment 1 8)
-\set Timing.beatStructure = #'(3 3 2)
+\set Timing.baseMoment = #(ly:make-moment 1/8)
+\set Timing.beatStructure = 3,3,2
% This won't beam (3 3 2) because of beamExceptions
-\repeat unfold 8 {c8} |
+\repeat unfold 8 {c''8} |
% This will beam (3 3 2) because we clear beamExceptions
\set Timing.beamExceptions = #'()
-\repeat unfold 8 {c8}
+\repeat unfold 8 {c''8}
@end lilypond
Auf gleiche Art werden Achtelnoten im 3/4-Takt über den ganzen Takt hin
die Eigenschaft @code{beamHalfMeasure} bestimmt, welche sich nur auf
Takte mit einer 3 im Zähler auswirkt:
-@lilypond[quote,verbatim,relative=2]
-\time 3/4
-r4. a8 a a |
-\set Timing.beamHalfMeasure = ##f
-r4. a8 a a |
+@lilypond[quote,verbatim]
+\relative a' {
+ \time 3/4
+ r4. a8 a a |
+ \set Timing.beamHalfMeasure = ##f
+ r4. a8 a a |
+}
@end lilypond
@subsubheading @i{Wie die automatische Bebalkung funktioniert}
<<
\new Staff {
\time 3/4
- \set Timing.baseMoment = #(ly:make-moment 1 8)
- \set Timing.beatStructure = #'(1 5)
+ \set Timing.baseMoment = #(ly:make-moment 1/8)
+ \set Timing.beatStructure = 1,5
\repeat unfold 6 { a8 }
}
\new Staff {
der automatischen Bebalkungsregeln für eine Taktart sind in
@ref{Taktangabe} beschrieben.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
\new Staff {
\overrideTimeSignatureSettings
3/4 % timeSignatureFraction
1/8 % baseMomentFraction
- #'(1 5) % beatStructure
+ 1,5 % beatStructure
#'() % beamExceptions
\time 3/4
- \repeat unfold 6 { a8 }
+ \repeat unfold 6 { a'8 }
}
\new Staff {
\time 3/4
- \repeat unfold 6 { a8 }
+ \repeat unfold 6 { a'8 }
}
>>
@end lilypond
Manuell definierte Balken werden mit den Zeichen @code{[} und
@code{]} (AltGr+8 bzw. 9) markiert.
-@lilypond[quote,relative=1,verbatim]
-r4 r8[ g' a r] r g[ | a] r
+@lilypond[quote,verbatim]
+\relative { r4 r8[ g' a r] r g[ | a] r }
@end lilypond
@cindex manuelle Balken, Richtung zuweisen
Die Richtung von Balken kann mit den Richtungszeichen verändert werden:
-@lilypond[quote,relative=2,verbatim]
-c8^[ d e] c,_[ d e f g]
+@lilypond[quote,verbatim]
+\relative { c''8^[ d e] c,_[ d e f g] }
@end lilypond
@funindex \noBeam
gesetzt werden. Unbebalkte Verzierungen werden nicht innerhalb von
normalen Balken gesetzt.
-@lilypond[quote,verbatim,relative=2]
-c4 d8[
-\grace { e32[ d c d] }
-e8] e[ e
-\grace { f16 }
-e8 e]
+@lilypond[quote,verbatim]
+\relative {
+ c''4 d8[
+ \grace { e32 d c d }
+ e8] e[ e
+ \grace { f16 }
+ e8 e]
+}
@end lilypond
@funindex stemLeftBeamCount
an seiner linken Seite (der als Achtelbalken der gesamten
Gruppe gewertet wird).
-@lilypond[quote,relative=2,verbatim]
-a8[ r16 f g a]
-a8[ r16
-\set stemLeftBeamCount = #2
-\set stemRightBeamCount = #1
-f16
-\set stemLeftBeamCount = #1
-g16 a]
+@lilypond[quote,verbatim]
+\relative a' {
+ a8[ r16 f g a]
+ a8[ r16
+ \set stemLeftBeamCount = #2
+ \set stemRightBeamCount = #1
+ f16
+ \set stemLeftBeamCount = #1
+ g16 a]
+}
@end lilypond
@snippets
das Tempo, während die darauffolgenden vier 32-Noten ein
gleichmäßiges Tempo haben.
-@lilypond[relative=1,verbatim,quote]
-\override Beam #'grow-direction = #LEFT
-\featherDurations #(ly:make-moment 2 1)
-{ c16[ c c c c c c c] }
-\override Beam #'grow-direction = #RIGHT
-\featherDurations #(ly:make-moment 2 3)
-{ c32[ d e f] }
-% revert to non-feathered beams
-\override Beam #'grow-direction = #'()
-{ g32[ a b c] }
+@lilypond[verbatim,quote]
+\relative c' {
+ \override Beam.grow-direction = #LEFT
+ \featherDurations #(ly:make-moment 2/1)
+ { c16[ c c c c c c c] }
+ \override Beam.grow-direction = #RIGHT
+ \featherDurations #(ly:make-moment 2/3)
+ { c32[ d e f] }
+ % revert to non-feathered beams
+ \override Beam.grow-direction = #'()
+ { g32[ a b c] }
+}
@end lilypond
@noindent
@code{\bar}-Befehl geändert werden. Eine doppelter Taktstrich etwa
wird normalerweise am Ende eines Stückes gesetzt:
-@lilypond[quote,relative=1,verbatim]
-e4 d c2 \bar "|."
+@lilypond[quote,verbatim]
+\relative { e'4 d c2 \bar "|." }
@end lilypond
Es ist kein Fehler, wenn die letzte Note in einem Takt nicht
Manuell können zwei einfache Taktstriche und zusätzlich fünf Arten
eines doppelten Taktstriches gesetzt werden:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar "|"
-f1 \bar "."
-g1 \bar "||"
-a1 \bar ".|"
-b1 \bar ".."
-c1 \bar "|.|"
-d1 \bar "|."
-e1
+@lilypond[quote,verbatim]
+\relative {
+ f'1 \bar "|"
+ f1 \bar "."
+ g1 \bar "||"
+ a1 \bar ".|"
+ b1 \bar ".."
+ c1 \bar "|.|"
+ d1 \bar "|."
+ e1
+}
@end lilypond
Zusätzlich gibt es noch punktierte und gestrichelte Taktstriche:
-@lilypond[quote,relative=1,verbatim]
-f1 \bar ";"
-g1 \bar "!"
-a1
+@lilypond[quote,verbatim]
+\relative {
+ f'1 \bar ";"
+ g1 \bar "!"
+ a1
+}
@end lilypond
@noindent
Taktstricharten, die sich in ihrem Verhalten an Zeilenumbrüchen
unterscheiden:
-@lilypond[quote,relative=2,verbatim]
-c4 c c c
-\bar "S"
-c4 c c c \break
-\bar "S"
-c4 c c c
-\bar "S-|"
-c4 c c c \break
-\bar "S-|"
-c4 c c c
-\bar "S-S"
-c4 c c c \break
-\bar "S-S"
-c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ c4 c c c
+ \bar "S"
+ c4 c c c \break
+ \bar "S"
+ c4 c c c
+ \bar "S-|"
+ c4 c c c \break
+ \bar "S-|"
+ c4 c c c
+ \bar "S-S"
+ c4 c c c \break
+ \bar "S-S"
+ c1
+}
@end lilypond
@cindex Wiederholungen
doppelter Taktstrich am Ende der Zeile ausgegeben wird und ein
öffnender Wiederholungsstrich am Anfang der nächsten Zeile.
-@lilypond[quote,relative=2,verbatim]
-c4 c c c
-\bar ".|:-||"
-c4 c c c \break
-\bar ".|:-||"
-c4 c c c
+@lilypond[quote,verbatim]
+\relative c'' {
+ c4 c c c
+ \bar ".|:-||"
+ c4 c c c \break
+ \bar ".|:-||"
+ c4 c c c
+}
@end lilypond
Für Kombinationen von Wiederholungen mit dem segno-Zeichen gibt
es sechs verschiedene Variationen:
-@lilypond[quote,relative=2,verbatim]
-c4 c c c
-\bar ":|.S"
-c4 c c c \break
-\bar ":|.S"
-c4 c c c
-\bar ":|.S-S"
-c4 c c c \break
-\bar ":|.S-S"
-c4 c c c
-\bar "S.|:-S"
-c4 c c c \break
-\bar "S.|:-S"
-c4 c c c
-\bar "S.|:"
-c4 c c c \break
-\bar "S.|:"
-c4 c c c
-\bar ":|.S.|:"
-c4 c c c \break
-\bar ":|.S.|:"
-c4 c c c
-\bar ":|.S.|:-S"
-c4 c c c \break
-\bar ":|.S.|:-S"
-c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ c4 c c c
+ \bar ":|.S"
+ c4 c c c \break
+ \bar ":|.S"
+ c4 c c c
+ \bar ":|.S-S"
+ c4 c c c \break
+ \bar ":|.S-S"
+ c4 c c c
+ \bar "S.|:-S"
+ c4 c c c \break
+ \bar "S.|:-S"
+ c4 c c c
+ \bar "S.|:"
+ c4 c c c \break
+ \bar "S.|:"
+ c4 c c c
+ \bar ":|.S.|:"
+ c4 c c c \break
+ \bar ":|.S.|:"
+ c4 c c c
+ \bar ":|.S.|:-S"
+ c4 c c c \break
+ \bar ":|.S.|:-S"
+ c1
+}
@end lilypond
Darüber hinaus wählt der @code{\inStaffSegno}-Befehl eines dieser
(@code{StaffGroup}) oder einem Klaviersystem
(@code{PianoStaff} bzw. (@code{GrandStaff}).
-@lilypond[quote,relative=1,verbatim]
+@lilypond[quote,verbatim]
<<
\new StaffGroup <<
- \new Staff {
- e4 d
+ \new Staff \relative {
+ e'4 d
\bar "||"
f4 e
}
- \new Staff { \clef bass c4 g e g }
+ \new Staff \relative { \clef bass c'4 g e g }
>>
- \new Staff { \clef bass c2 c2 }
+ \new Staff \relative { \clef bass c'2 c2 }
>>
@end lilypond
Beispiel werden die Taktlinien überall ausgegeben:
@lilypond[verbatim,quote,relative=1]
-\override Score.BarNumber #'break-visibility = #'#(#t #t #t)
+\override Score.BarNumber.break-visibility = #'#(#t #t #t)
\set Score.currentBarNumber = #11
% Permit first bar number to be printed
\bar ""
Systems zusammenstoßen. Um das zu verhindert, kann die
@code{padding}-Eigenschaft von @code{BarNumer} verwendet werden,
um die Zahl zu verschieben. Für mehr Information siehe
-@rinternals{StaffgGroup} und @rinternals{BarNumber}.
+@rinternals{StaffGroup} und @rinternals{BarNumber}.
@node Takt- und Taktzahlüberprüfung
fokussiert.
@funindex |
-@funindex pipeSymbol
+@funindex "|"
Es ist auch möglich, die Bedeutung des Symbols @code{|} (Pipe)
umzudefinieren, so dass hiermit eine andere Aktion als eine
Taktüberprüfung erreicht wird.
-Das geschieht, indem man der Pipe (@code{pipeSymbol} einen musikalischen
+Das geschieht, indem man der Pipe (@code{"|"} einen musikalischen
Ausdruck zuweist. Im nächsten Beispiel wird @code{|} dazu
verwendet, eine doppelte Taktlinie auszugeben, woimmer man
das Zeichen auch setzt. Gleichzeitig hört das Zeichen auf,
als Taktüberprüfung zu funktionieren.
@lilypond[quote,verbatim]
-pipeSymbol = \bar "||"
+"|" = \bar "||"
{
c'2 c' |
c'2 c'
Der Wert, der eingesetzt werden soll, wird in der Eigenschaft
@code{rehearsalMark} gespeichert.
-@lilypond[quote,verbatim,relative=2]
-c1 \mark \default
-c1 \mark \default
-c1 \mark #8
-c1 \mark \default
-c1 \mark \default
+@lilypond[quote,verbatim]
+\relative c'' {
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark #8
+ c1 \mark \default
+ c1 \mark \default
+}
@end lilypond
@noindent
\set Score.markFormatter = #format-mark-circle-alphabet
@end example
-@lilypond[quote,verbatim,relative=2]
-\set Score.markFormatter = #format-mark-box-alphabet
-c1 \mark \default
-c1 \mark \default
-c1 \mark #8
-c1 \mark \default
-c1 \mark \default
+@lilypond[quote,verbatim]
+\relative c'' {
+ \set Score.markFormatter = #format-mark-box-alphabet
+ c1 \mark \default
+ c1 \mark \default
+ c1 \mark #8
+ c1 \mark \default
+ c1 \mark \default
+}
@end lilypond
@cindex Übungszeichen formatieren
eine Zahl ausgegeben wird. Dann wird ein Übungszeichen in einem
Kasten produziert.
-@lilypond[quote,verbatim,relative=2]
-\set Score.markFormatter = #format-mark-numbers
-c1 \mark \default
-c1 \mark \default
-\set Score.markFormatter = #format-mark-box-numbers
-c1 \mark \default
-\set Score.markFormatter = #format-mark-circle-numbers
-c1 \mark \default
-\set Score.markFormatter = #format-mark-circle-letters
-c1
+@lilypond[quote,verbatim]
+\relative c'' {
+ \set Score.markFormatter = #format-mark-numbers
+ c1 \mark \default
+ c1 \mark \default
+ \set Score.markFormatter = #format-mark-box-numbers
+ c1 \mark \default
+ \set Score.markFormatter = #format-mark-circle-numbers
+ c1 \mark \default
+ \set Score.markFormatter = #format-mark-circle-letters
+ c1
+}
@end lilypond
Die Datei @file{scm/translation-functions.scm} beinhaltet
@code{\musicglyph} als ein
@code{\mark}-Zeichen definierte werden:
-@lilypond[quote,verbatim,relative=1]
-c1 \mark \markup { \musicglyph #"scripts.segno" }
-c1 \mark \markup { \musicglyph #"scripts.coda" }
-c1 \mark \markup { \musicglyph #"scripts.ufermata" }
-c1
+@lilypond[quote,verbatim]
+\relative c' {
+ c1 \mark \markup { \musicglyph #"scripts.segno" }
+ c1 \mark \markup { \musicglyph #"scripts.coda" }
+ c1 \mark \markup { \musicglyph #"scripts.ufermata" }
+ c1
+}
@end lilypond
@noindent
@funindex \grace
@funindex \slashedGrace
@funindex \acciaccatura
-@funindex \appoggiature
+@funindex \appoggiatura
@cindex Verzierungen
@cindex Ziernoten
Ornamente. Sie werden in einer kleineren Schriftgröße gesetzt und nehmen
keine logische Zeit im Takt ein.
-@lilypond[quote,relative=2,verbatim]
-c4 \grace b16 a4(
-\grace { b16[ c16] } a2)
+@lilypond[quote,verbatim]
+\relative {
+ c''4 \grace b16 a4(
+ \grace { b16 c16 } a2)
+}
@end lilypond
Es gibt drei Arten von Verzierungen:
den Vorschlag (engl. acciaccatura), eine angebundene Verzierungsnote
-mit einem Schrägstrich durch den Hals, und den Vorhalt (engl. appogiatura),
+mit einem Schrägstrich durch den Hals, und den Vorhalt (engl. appoggiatura),
welcher den Wert der Hauptnote um seinen eigenen Wert verkürzt und
ohne Schrägstrich notiert wird. Man kann einen Vorschlag auch mit
Schrägstrich durch den Hals, aber ohne Legatobogen notieren. Diese
Verzierung wird mit dem Befehl @code{\slashedGrace} notiert und wird
zwischen Noten notiert, die selber einen Legatobogen haben.
-@lilypond[quote,relative=2,verbatim]
-\acciaccatura d8 c4
-\appoggiatura e8 d4
-\acciaccatura { g16[ f] } e2
-\slashedGrace a,8 g4
-\slashedGrace b16 a4(
-\slashedGrace b8 a2)
+@lilypond[quote,verbatim]
+\relative {
+ \acciaccatura d''8 c4
+ \appoggiatura e8 d4
+ \acciaccatura { g16 f } e2
+ \slashedGrace a,8 g4
+ \slashedGrace b16 a4(
+ \slashedGrace b8 a2)
+}
@end lilypond
Die Position von Verzierungen ist zwischen Notensystemen
System zwei 16-Noten für jede 8-Note des zweiten Systems:
@lilypond[quote,relative=2,verbatim]
-<< \new Staff { e2 \grace { c16[ d e f] } e2 }
- \new Staff { c2 \grace { g8[ b] } c2 } >>
+<< \new Staff { e2 \grace { c16 d e f } e2 }
+ \new Staff { c2 \grace { g8 b } c2 } >>
@end lilypond
@funindex \afterGrace
Argumente: die Hauptnote und die Verzierung, die nach der
Hauptnote folgen soll:
-@lilypond[quote,verbatim,relative=2]
-c1 \afterGrace d1 { c16[ d] } c1
+@lilypond[quote,verbatim]
+\relative { c''1 \afterGrace d1 { c16[ d] } c1 }
@end lilypond
Damit wird die Verzierung mit einem Abstand von der Hauptnote
der Abstand verändert, wenn der Wert 3/4, 15/16 und 1/2 der
Hauptnote beträgt.
-@lilypond[quote,verbatim,relative=2]
+@lilypond[quote,verbatim]
<<
- \new Staff {
- c1 \afterGrace d1 { c16[ d] } c1
+ \new Staff \relative {
+ c''1 \afterGrace d1 { c16[ d] } c1
}
- \new Staff {
+ \new Staff \relative {
#(define afterGraceFraction (cons 15 16))
- c1 \afterGrace d1 { c16[ d] } c1
+ c''1 \afterGrace d1 { c16[ d] } c1
}
- \new Staff {
+ \new Staff \relative {
#(define afterGraceFraction (cons 1 2))
- c1 \afterGrace d1 { c16[ d] } c1
+ c''1 \afterGrace d1 { c16[ d] } c1
}
>>
@end lilypond
@lilypond[quote,verbatim,relative=2]
\new Voice {
<< { d1^\trill_( }
- { s2 s4. \grace { c16[ d] } } >>
+ { s2 s4. \grace { c16 d } } >>
c1)
}
@end lilypond
Fall wird die Richtung der Hälse geändert und dann wieder der
Standard eingestellt:
-@lilypond[quote,verbatim,relative=2]
-\new Voice {
+@lilypond[quote,verbatim]
+\new Voice \relative {
\acciaccatura {
\stemDown
- f16->
+ f''16->
\stemNeutral
}
g4 e c2
synchronisiert. Vorsicht ist geboten, wenn nur in bestimmten Systemen
Verzierungen vorkommen:
-@lilypond[quote,relative=2,verbatim]
+@lilypond[quote,verbatim]
<<
- \new Staff { e4 \bar ".|:" \grace c16 d2. }
- \new Staff { c4 \bar ".|:" d2. }
+ \new Staff \relative { e''4 \bar ".|:" \grace c16 d2. }
+ \new Staff \relative { c''4 \bar ".|:" d2. }
>>
@end lilypond
Takte, die genauso lang sind wie der Notenabschnitt.
@lilypond[verbatim,quote]
-MyCadenza = \relative c' {
- c4 d8 e f g g4
+MyCadenza = \relative {
+ c'4 d8 e f g g4
f2 g4 g
}
wird dann auch bei 9/8 gezogen und nicht bei 5/4.
@lilypond[quote,verbatim,relative=1]
-\set Score.measureLength = #(ly:make-moment 5 4)
+\set Score.measureLength = #(ly:make-moment 5/4)
c1 c4
c1 c4
c4 c4
-\set Score.measurePosition = #(ly:make-moment 5 8)
+\set Score.measurePosition = #(ly:make-moment 5/8)
b4 b4 b8
c4 c1
@end lilypond