@enumerate
@item
-Ask on the lilypond-devel maillist if such a rewrite is necessary;
+Ask on the lilypond-devel mailing list if such a rewrite is necessary;
somebody else might already be working on this issue!
@item
Once you have followed these guidelines, please send a message to
lilypond-devel with your documentation submissions. Unfortunately
-there is a strict “no top-posting” check on the mailist; to avoid
+there is a strict “no top-posting” check on the mailing list; to avoid
this, add:
> I'm not top posting.
All manuals live in @file{Documentation/}.
In particular, there are four user manuals, their respective master
-source files are @file{learning.tely} (LM, Learning Manual),
-@file{notation.tely} (NR, Notation Reference),
-@file{music-glossary.tely} (MG, Music Glossary), and
-@file{lilypond-program} (AU). Each chapter is written in a separate
+source files are @file{learning@/.tely} (LM, Learning Manual),
+@file{notation@/.tely} (NR, Notation Reference),
+@file{music@/-glossary@/.tely} (MG, Music Glossary), and
+@file{lilypond@/-program} (AU). Each chapter is written in a separate
file, ending in @file{.itely} for files containing lilypond code, and
@file{.itexi} for files without lilypond code, located in a subdirectory
-associated to the manual (@file{learning/} for @file{learning.tely}, and
+associated to the manual (@file{learning/} for @file{learning@/.tely}, and
so on); list the subdirectory of each manual to determine the filename
of the specific chapter you wish to modify.
Developer manuals live in @file{Documentation/} too. Currently there is
-only one: the Contributor's Guide @file{contrib-guide.texi} you are
+only one: the Contributor's Guide @file{contrib@/-guide@/.texi} you are
reading.
Snippet files are part of documentation, and the Snippet List (SL) lives
@item
All context or layout object strings should be prefaced with @code{#}.
Again, LilyPond does not strictly require this, but it is helpful
-to get users accustomed to this scheme construct. i.e. @code{\set
+to get users accustomed to this scheme construct, i.e. @code{\set
Staff.instrumentName = #"cello"}
@item
@end example
@item
-Use @{ @} marks for additional @code{\markup} format comands; ie
+Use @{ @} marks for additional @code{\markup} format commands; ie
@example
not: c^\markup \tiny\sharp
@code{@@ruser@{@dots{}@}} --- link to Notation Reference.
@item
-@code{@@rweb@{@dots{}@}} --- link to General Informaion.
+@code{@@rweb@{@dots{}@}} --- link to General Information.
@end itemize
Introducing examples must be done with
@example
-. (ie finish the previous sentence/paragaph)
+. (ie finish the previous sentence/paragraph)
: (ie `in this example:')
, (ie `may add foo with the blah construct,')
@end example
@item
@@predefined ... @@endpredefined is for commands in
-@file{ly/*-init.ly}
+@file{ly/@/*-init@/.ly}
@item
Do not include any real info in second-level sections (ie 1.1
Material in the Internals reference is generated automatically
from our source code. Any doc work on Internals therefore
-requires modifying files in @file{scm/*.scm}. Texinfo is allowed
+requires modifying files in @file{scm/@/*.scm}. Texinfo is allowed
in these docstrings.
Most documentation writers never touch these, though. If you want
The mailing list @code{translations@@lilynet.net} is dedicated to
LilyPond web site and documentation translation; on this list, you will
get support from the Translations Meister and experimented translators,
-and we regularly discuss translations issues common to all languagues.
+and we regularly discuss translations issues common to all languages.
All people interested in LilyPond translations are invited to subscribe
to this list regardless of the amount of their contribution, by sending
an email to @code{translations-request@@lilynet.net} with subject
where @var{MY-LANGUAGE} is the ISO 639 language code.
Finally, add a language definition for your language in
-@file{python/langdefs.py}.
+@file{python/@/langdefs@/.py}.
@node Documentation translation details
original text; for instance, in the translation of the web site section
Community, you may take this into account depending on what you know the
community in your language is willing to support, which is possible only
-if you personnally assume this support, or there exists a public forum
+if you personally assume this support, or there exists a public forum
or mailing list listed in Community for LilyPond in your language:
@itemize
Some pieces of text manipulated by build scripts that appear in the
output are translated in a @file{.po} file -- just like LilyPond output
-messages -- in @file{Documentation/po}. The Gettext domain is named
+messages -- in @file{Documentation/@/po}. The Gettext domain is named
@code{lilypond-doc}, and unlike @code{lilypond} domain it is not managed
through the Free Translation Project.
Take care of using typographic rules for your language, especially in
-@file{macros.itexi}.
+@file{macros@/.itexi}.
If you wonder whether a word, phrase or larger piece of text should be
translated, whether it is an argument of a Texinfo command or a small
piece sandwiched between two Texinfo commands, try to track whether and
where it appears in PDF and/or HTML output as visible text. This piece
-of advice is especially useful for translating @file{macros.itexi}.
+of advice is especially useful for translating @file{macros@/.itexi}.
Please keep verbatim copies of music snippets (in @code{@@lilypond}
blocs). However, some music snippets containing text that shows in
@end example
@noindent
-in the source, open @file{Documentation/snippets/@var{filename}.ly},
+in the source, open @file{Documentation/@/snippets/@/@var{filename}@/.ly},
translate the @code{texidoc} header field it contains, enclose it with
@code{texidoc@var{MY-LANGUAGE} = "} and @code{"}, and write it into
-@file{Documentation/@var{MY-LANGUAGE}/texidocs/@var{filename}.texidoc}.
-Additionnally, you may translate the snippet's title in @code{doctitle}
+@file{Documentation/@/@var{MY-LANGUAGE}/@/texidocs/@/@var{filename}@/.texidoc}.
+Additionally, you may translate the snippet's title in @code{doctitle}
header field, in case @code{doctitle} is a fragment option used in
@code{@@lilypondfile}; you can do this exactly the same way as
@code{texidoc}. For instance,
-@file{Documentation/@var{MY-LANGUAGE}/texidocs/@var{filename}.texidoc}
+@file{Documentation/@/@var{MY-LANGUAGE}/@/texidocs/@/@var{filename}@/.texidoc}
may contain
@example
@noindent
Then, you should get these translated strings into compiled snippets in
-@file{Documentation/snippets}, see @q{General guidelines} in @ref{Adding
+@file{Documentation/@/snippets}, see @q{General guidelines} in @ref{Adding
and editing snippets}.
@code{@@example} blocks need not be verbatim copies, e.g. variable
@seeCommittishesUpdate
Global state of the translation is recorded in
-@file{Documentation/translations.itexi}, which is used to generate
+@file{Documentation/@/translations@/.itexi}, which is used to generate
Translations status page. To update that page, do from
@file{Documentation/}
make translation-status
@end example
-This will also leave @file{out/translations-status.txt}, which contains
+This will also leave @file{out/@/translations@/-status@/.txt}, which contains
up-to-dateness percentages for each translated file, and update word
counts of documentation files in this Guide.
make CHECKED_FILES=@var{MY_LANGUAGE/@var{manual}/foo.itely} update-translation
@end example
-For each file to be udpated, @code{update-translation} will open your
+For each file to be updated, @code{update-translation} will open your
text editor with this file and a diff of the file in English; if the
diff cannot be generated or is bigger than the file in English itself,
the full file in English will be opened instead.
make ISOLANG=@var{MY_LANGUAGE} skeleton-update
@end example
-@file{.po} message catalogs in @file{Documentation/po/} may be updated
-by issuing from @file{Documentation/} or @file{Documentation/po/}
+@file{.po} message catalogs in @file{Documentation/@/po/} may be updated
+by issuing from @file{Documentation/} or @file{Documentation/@/po/}
@example
make po-update
@end example
This script overwrites music snippets in
-@file{@var{MY_LANGUAGE/foo/every.itely}} with music snippets from
-@file{@var{foo/every.itely}}. It ignores skeleton files, and keeps
+@file{@var{MY_LANGUAGE/@/foo/@/every@/.itely}} with music snippets from
+@file{@var{foo/@/every@/.itely}}. It ignores skeleton files, and keeps
intact music snippets preceded with a line starting with @code{@@c
KEEP LY}; it reports an error for each @file{.itely} that has not the
same music snippet count in both languages. Always use this script
no sense in their context.
When you have updated texidocs in
-@file{Documentation/@var{MY-LANGUAGE}/texidocs}, you can get these
-changes into compiled snippets in @file{Documentation/snippets}, see
+@file{Documentation/@/@var{MY-LANGUAGE}/@/texidocs}, you can get these
+changes into compiled snippets in @file{Documentation/@/snippets}, see
@q{General guidelines} in @ref{Adding and editing snippets}.
Finally, a command runs the three update processes above for all
@end example
A special case is updating Snippet documentation strings in
-@file{Documentation/@var{MY-LANGUAGE}/texidocs}. For these to be
+@file{Documentation/@/@var{MY-LANGUAGE}/@/texidocs}. For these to be
correctly marked as up-to-date, first run @code{makelsr.py} as
explained in @ref{Adding and editing snippets}, and commit the
-resulting compiled snippets left in @file{Documentation/snippets/}.
+resulting compiled snippets left in @file{Documentation/@/snippets/}.
Say the SHA1 ID code of this commit is <C>. Now edit again your
-translated files in @file{Documentation/@var{MY-LANGUAGE}/texidocs}
+translated files in @file{Documentation/@/@var{MY-LANGUAGE}/@/texidocs}
adjusting the 40-digit committish that appears in the text to be <C>;
finally, commit these updated files. Not doing so would result in
changes made both to your updates and original snippets to
no longer uses this macro.
@item Update @file{*.tely} files completely with
-@command{make check-translation} -- you may want to redirect ouptput
+@command{make check-translation} -- you may want to redirect output
to a file because of overwhelming output, or call check-translation.py
on individual files, see @ref{Check state of translation}.
@end example
@noindent
-This step requires a sucessful documentation build (with @command{make
+This step requires a successful documentation build (with @command{make
doc}). Some cross-references are broken because they point to a node
that exists in the documentation in English, which has not been added
to the translation; in this case, do not fix the cross-reference but
@item @code{lilypond/translation} Git branch may be merged into
master only if LilyPond (@command{make all}) and documentation
-(@command{make doc}) compile succesfully.
+(@command{make doc}) compile successfully.
@item @code{master} Git branch may be merged into
@code{lilypond/translation} whenever @command{make} and @command{make
-doc} are succesful (in order to ease documentation compilation by
+doc} are successful (in order to ease documentation compilation by
translators), or when significant changes had been made in
documentation in English in master branch.
A number of Python scripts handle a part of the documentation
translation process. All scripts used to maintain the translations
-are located in @file{scripts/auxiliar/}.
+are located in @file{scripts/@/auxiliar/}.
@itemize
@item @file{check_translation.py} -- show diff to update a translation,
"makeinfo --html" has been dropped.
@end itemize
-Other scripts are used in the build process, in @file{scripts/build/}:
+Other scripts are used in the build process, in @file{scripts/@/build/}:
@itemize
@item @file{mass-link.py} -- link or symlink files between English documentation
and documentation in other languages.
@end itemize
-Python modules used by scripts in @file{scripts/auxiliar/} or @file{scripts/build/} (but
-not by installed Python scripts) are located in @file{python/auxiliar/}:
+Python modules used by scripts in @file{scripts/@/auxiliar/} or @file{scripts/@/build/} (but
+not by installed Python scripts) are located in @file{python/@/auxiliar/}:
@itemize
@item @file{manuals_definitions.py} -- define manual names and name of
cross-reference Texinfo macros,
@item @file{buildlib.py} -- common functions (read piped output
of a shell command, use Git),
-@item @file{postprocess_html.py} (module imported by @file{www_post.py}) -- add footer and
+@item @file{postprocess_html.py} (module imported by @file{www_post@/.py}) -- add footer and
tweak links in HTML pages.
@end itemize
projects / lilypond.git / blobdiff