* stepmake/aclocal.m4: version check patch (thanks MWD)

[lilypond.git] / INSTALL.txt

diff --git a/INSTALL.txt b/INSTALL.txt
index 65765b509d36b6f6acb701bf8229caeb71096be2..2a431f3a5c0a8c6d9eb00db2c5f15db14fcb0160 100644 (file)
--- a/INSTALL.txt
+++ b/INSTALL.txt
@@ -1,538 +1,385 @@
 
 
 
 

-Table of Contents
-*****************
-
-
-
-
-INSTALL - compiling and installing GNU LilyPond
-  Downloading
-    Source code
-    Precompiled binaries
-    Upgrading
-  Requirements
-    Compilation
-    Running requirements
-    Website requirements
-  Building  LilyPond
-    Configuring for multiple platforms
-  Emacs mode
-  Compiling for distributions
-    Red Hat Linux
-    LinuxPPC
-    SuSE
-    Slackware
-    Mandrake
-    Debian GNU/Linux
-  Problems
-    FLex-2.5.4a and gcc-3.0
-    NetBSD
-    Solaris:
-    AIX
-
-

 INSTALL - compiling and installing GNU LilyPond
 ***********************************************
 
 INSTALL - compiling and installing GNU LilyPond
 ***********************************************
 

-   This document describes how to build LilyPond on Unix platforms.  It
-is also known to run and compile on Windows NT/95/98 as well.  More
-information on this topic can be found at the LilyPond on Windows page
-(http://www.lilypond.org/gnu-windows/).
-
-Downloading
-===========
-
-   Even numbered versions are `stable'. The webpages for the stable
-version (1.2) reside on the GNU servers
-(http://www.gnu.org/software/lilypond). Big enhancements go into the
-latest odd numbered version (1.3), whose webpages are on the lilypond
-site (http://www.lilypond.org/).
-
-Source code
------------
-
-   If you want to compile LilyPond from source, download here:
-   * Download development releases from
-     `ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/' by FTP and
-     `http://ftp.cs.uu.nl/pub/GNU/LilyPond/', by HTTP.
-
-   * `ftp://sca.uwaterloo.ca/pub/' by FTP (Canadian mirror)
-
-   * at `lilypond.org' `ftp://ftp.lilypond.org/pub/LilyPond/' by FTP and
-     `http://www.lilypond.org/ftp/' by HTTP.
-
-   Of course, if your platform supports LilyPond, such as Debian
-GNU/Linux, FreeBSD, OpenBSD or NetBSD, you're encouraged to use the
-native build from source drill.
-
-   For Red Hat Linux and SuSE Linux, `.spec' files are included in the
-tarball; see instructions below.
-
-Precompiled binaries
---------------------
-
-   If you want to track bleeding edge development, try:
-
-   * Debian GNU/Linux
-     (ftp://ftp.debian.org/debian/pool/main/l/lilypond/) usually has
-     the latest binaries for the most useful stable and development
-     versions, while
-
-   * Mandrake Cooker
-     (http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/) also
-     provides fairly recent versions.
-
-   Binaries are made available for other popular platforms, but as we
-need to compile them ourselves, they are not updated for every version
-released.
-
-   * Red Hat i386
-     (ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/RedHat/RPMS/)
-
-   * SuSE (ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE)
-
-   * LinuxPPC (ftp://ftp.lilypond.org/pub/LilyPond/binaries/linuxppc/)
-
-   * Windows (http://www.lilypond.org/gnu-windows/)
+Abstract
+========

 
 

-Upgrading
----------
+   This document explains what you need to install LilyPond, and what
+you should do.  If you are going to compile and install LilyPond often,
+e.g. when doing development, you might want to check out the
+`buildscripts/set-lily.sh' script.  It sets some environment variables
+and symlinks, which comes in handly when you have to compile LilyPond
+more often.

 
 

-   There are two options for upgrading sources.
+Obtaining
+=========

 
 

-   * if you have an unpacked source tree of a previous version, you may
-     the patches.
+   You can get the latest version of LilyPond at
+ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/
+(ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/).

 
 

-     _If you upgrade by patching do remember to rerun autoconf after
-     applying the patch_.
+   _If you upgrade by patching do remember to rerun autoconf after
+applying the patch_.

 
 

-   * if you have the `.tar.gz' file of a previous release, you can use
-     xdelta (ftp://ftp.xcf.berkeley.edu/pub/xdelta/).   This is much
-     safer than using patches, and is the recommended way.
+   If you do not want to download the entire archive for each version,
+the safest method for upgrading is to use `xdelta', see
+`ftp://ftp.xcf.berkeley.edu/pub/xdelta/'.

 
 

-     The following command produces `lilypond-1.4.3.tar.gz' from
-     `lilypond-1.4.2.tar.gz' identical (up to compression dates) to the
-     .3 on the FTP site.
-            xdelta patch lilypond-1.4.2-1.4.3.xd lilypond-1.4.2.tar.gz
+   The following command produces `lilypond-1.1.55.tar.gz' from
+`lilypond-1.1.54' identical (up to compression dates) to the .55 on the
+FTP site.
+       xdelta patch lilypond-1.1.54-1.1.55.xd lilypond-1.1.54.tar.gz

 
 

-Requirements
-============
+Prerequisites
+=============

 
 

-Compilation
------------
+   For compilation you need:

 
 

-   You need the following packages to compile Lilypond.
+   * A GNU system: GNU LilyPond is known to run on these GNU systems:
+     Linux     (PPC, intel), FreeBSD, AIX, NeXTStep, IRIX, Digital Unix
+     and Solaris.

 
 

-   * A reasonably new C++ compiler:  EGCS 1.1, GCC 2.95.2 or newer.
-     Check out the gcc site (ftp://ftp.gnu.org/gnu/gcc/).
+   * Lots of disk space: LilyPond takes between 30 and 100 mb to
+     compile if you use debugging information.  If you are short on
+     disk-space run configure with `--disable-debugging'.

 
 

-   * Python 1.5, Check out the python website (http://www.python.org).
+   * Although we recommend to use Unix, LilyPond is known to run on
+     Windows NT/95/98 as well.  See Section Windows NT/95,es.

 
 

-   * GUILE 1.3.4 or newer,  check out the GUILE webpage
-     (http://www.gnu.org/software/guile/guile.html).  Version 1.4 is
-     recommended for better performance.
+   * EGCS 1.1 or newer. Check out `ftp://ftp.gnu.org/pub/gcc/'.

 
 

-   * GNU Make.  Check out the GNU make FTP directory
-     (ftp://ftp.gnu.org/gnu/make/).
+   * Python 1.5, Check out `ftp://ftp.python.org' or
+     `ftp://ftp.cwi.nl/pub/python'.

 
 

-   * Flex (version 2.5.4a or newer).  Check out the Flex webpage
-     (http://www.gnu.org/software/flex/).
+   * GUILE 1.3.4,  check out
+     http://www.gnu.org/software/guile/guile.html
+     (http://www.gnu.org/software/guile/guile.html).

 
 

-   * Bison (version 1.25 or newer).  Check out the bison webpage
-     (http://www.gnu.org/software/bison/)
+   * GNU make.  Check out ftp://ftp.gnu.org/make/
+     (ftp://ftp.gnu.org/make/).

 
 

-   * TeX.
+   * Flex (version 2.5.4 or newer).  Check out ftp://ftp.gnu.org/flex/
+     (ftp://ftp.gnu.org/flex/).

 
 

-     TeX is used as an output backend.
+   * Bison (version 1.25 or newer).  Check out ftp://ftp.gnu.org/bison/
+     (ftp://ftp.gnu.org/bison/).

 
 

-     Also, TeX's libkpathsea is used to find the fonts (`.mf', `.afm',
-     `.tfm').  Make sure you have tetex 1.0 or newer (1.0.6 is known to
-     work).  You may need to install a tetex-devel or tetex-dev package
-     too.
+   * Texinfo. Check out ftp://ftp.gnu.org/pub/texinfo/
+     (ftp://ftp.gnu.org/pub/texinfo/).  Most documentation is in
+     texinfo.

 
 

-   * Texinfo (version 4.0 or newer).  The documentation of lily is
-     written in texinfo.  Check out the texinfo FTP directory
-     (ftp://ftp.gnu.org/gnu/texinfo/).
+   * The geometry package for LaTeX is needed to use ly2dvi.  Available
+     at
+     ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry
+     (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry)
+     or at mirror site ftp://ftp.dante.de (ftp://ftp.dante.de)

 
 

-   * The geometry package for LaTeX is needed to use ly2dvi.  It is
-     available at the FTP directory for `geometry'
-     (ftp://ftp.ctan.org/tex-archive/macros/latex/contrib/supported/geometry).
-     This package is normally included with the TeX distribution.
-
-   * MetaPost, needed for generating PostScript fonts. Please note that
-     tetex-0.4pl8 (included with Red Hat 5.x) does not include
-     `mfplain.mp', which is needed for producing the scalable font
+   * MetaPost, if you want to use direct PostScript output. Please note
+     that  tetex-0.4pl8 (included with Redhat 5.x) does not include
+     `mfplain.mp', which is needed  for producing the scaleable font

      files.
 
      files.
 

-     If you don't have MetaPost and don't want to use PostScript
-     output, then edit `mf/GNUmakefile', removing the line saying
-     `PFA_FILES='.
-
-   * kpathsea, a library for searching (TeX) files.  `kpathsea' is
-     usually included with your installation of TeX.  You may need to
-     install a tetex-devel or tetex-dev package too.
-
-     In the very unlikely case that kpathsea is not available for your
-     platform (ie, you're not running GNU/Linux, Windows, or any recent
-     UNIX), you can compile LilyPond without kpathsea support.  In that
-     case, you'll probably have to indicate where TeX's tfm files live.
-     Invoke configure something like:
-
-          ./configure --without-kpathsea --enable-tfm-path=/usr/share/texmf/fonts/tfm/public/cm/:/usr/share/texmf/fonts/tfm/ams/symbols

 
 

-
-Running requirements
---------------------
+Running
+=======

 
    GNU LilyPond does use a lot of resources. For operation you need the
 following software
 
 
    GNU LilyPond does use a lot of resources. For operation you need the
 following software
 

-   * TeX.
+   * TeX

 
 

-   * Xdvi and Ghostscript
+   * A PostScript printer and/or viewer (such as Ghostscript) is
+     strongly     recommended.  Xdvi will show all embedded PostScript
+     too if you have     Ghostscript installed.

 
 

-   * GUILE 1.3.4, or newer.  Check out the GUILE webpage
-     (http://www.gnu.org/software/guile.html)
+   * GUILE 1.3.4, check out http://www.gnu.org/software/guile/
+     (http://www.gnu.org/programs/guile.html)

 
    For running LilyPond successfully you have to help TeX and MetaFont
 find various files.  The recommended way of doing so is adjusting the
 
    For running LilyPond successfully you have to help TeX and MetaFont
 find various files.  The recommended way of doing so is adjusting the

-environment variables in the start-up scripts of your shell. Appropriate
-Csh and bourne sh scripts are left in
-`buildscripts/out/lilypond-profile' and
-`buildscripts/out/lilypond-login' after compilation.
+environment variables in the start-up scripts of your shell.  An
+example is given here for the Bourne shell:
+     export MFINPUTS="/usr/local/share/lilypond/mf:"
+     export TEXINPUTS="/usr/local/share/lilypond/tex:/usr/local/share/lilypond/ps:"

 
 

-   LilyPond is a big and slow program.  A fast CPU and plenty of RAM is
-recommended for comfortable use.
+   The empty path component represents TeX and MetaFont's default
+search paths.  Scripts with the proper paths for the bourne and C-shell
+respectively are generated in `buildscripts/out/lilypond-profile' and
+`buildscripts/out/lilypond-login' during compilation.

 
 

-Website requirements
---------------------
+   LilyPond is a hiddeously big, slow and bloated program.  A fast CPU
+and plenty of RAM is recommended for comfortable use.

 
 

-   The documentation comes in the form of a website. You can view this
-website on the internet, but you can also build it locally. This process
-requires a successful compile of lilypond. The website is built by
-issuing
+Website
+=======

 
 

-       make web-doc
+   The website is the most convenient form to use for reading the
+documentation on-line documentation. It is made by entering

 
 

-   Building the website requires some additional tools:
+       make website
+   This does require a fully functioning

 
 

-   * xpmtoppm (from the netpbm package: the Portable Bitmap Utilities).
-     The original is at the netpbm FTP site
-     (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)
+   If you want to auto-generate Lily's website, you'll need some
+additional conversion tools.

 
 

-   * pnmtopng. The original is at in the pnmtopng FTP site
-     (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).
+   * xpmtoppm (from the Portable Bitmap Utilities) (For RedHat Linux
+      users: it is included within the package libgr-progs).
+     the original is at
+     ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz
+     (ftp://ftp.x.org/contrib/utilities/netpbm-1mar1994.p1.tar.gz)

 
 

-   * Bibtex2html (http://www.lri.fr/~filliatr/ftp/bibtex2html/), or
-     Bib2html (http://www.uni-koblenz.de/ag-ki/ftp/bib2html/).
-     Bibtex2html is available in debian, while bib2html is in some rpm
-     based distributions.  Bib2html, in turn depends on man2html for
-     proper installation.  man2html can be had from
+   * pnmtopng, which is also in libgr-progs for RedHat. The original is
+     at
+     ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz
+     (ftp://swrinde.nde.swri.edu/pub/png/applications/pnmtopng-2.37.2.tar.gz).i
+
+     The version of `pnmtopng' that is distributed with RedHat 5.1 and
+     5.2 contains a bug: pnmtopng is dynamically linked to the wrong
+     version of libpng, which results in cropped images.  Recompile it
+     from source, and make sure that the pnmtopng binary is linked
+     statically to the libpng that is included in libgr.  RedHat 6.0
+     does not have this problem.
+
+           tar xzf libgr-2.0.13.tar.gz
+                make
+                cd png
+                rm libpng.so*
+                make pnmtopng
+
+     You can then install the new pnmtopng into `/usr/local/bin/'
+
+   * Bib2html http://pertsserver.cs.uiuc.edu/~hull/bib2html.
+     (http://pertsserver.cs.uiuc.edu/~hull/bib2html.)      Which, in
+     turn depends on man2html for proper installation.  man2html can be
+     had from

      http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
      (http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
 
      http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05
      (http://askdonald.ask.uni-karlsruhe.de/hppd/hpux/Networking/WWW/Man2html-1.05).
 

-     The website will build without bib converter utility, but you will
-     not see our hypertextified bibliography.
+     The website will build without this utility, but you will not see
+     our hypertextified bibliography.
+
+   * Doc++ (optional) to read the source code.

 
 

-   * texinfo (a development release) The documentation will build with
-     texinfo-4.0, but if you want split html pages, you're best off
-     using the lates pretest version from texinfo-4.0b
-     (ftp://texinfo.org/texinfo/pretests/texinfo-4.0b.tar.gz) or
-     texinfo-4.0b (ftp://alpha.gnu.org/gnu/texinfo-4.0b.tar.gz)

 
 

-Building  LilyPond
-==================
+Configuring and compiling
+=========================
+
+   to install GNU LilyPond, simply type:

 
 

-   to install GNU LilyPond, type:

        gunzip -c lilypond-x.y.z | tar xf -
        cd lilypond-x.y.z
        gunzip -c lilypond-x.y.z | tar xf -
        cd lilypond-x.y.z

-       ./configure             # run with --help to see appropriate options
+       ./configure             # fill in your standard prefix with --prefix

        make
        make install
        make
        make install

-             sh buildscripts/clean-fonts.sh
-
-   If you are doing an upgrade, you should remove all `feta' `.pk' and
-`.tfm' files.  A script has been provided to do the work for you, see
-`buildscripts/clean-fonts.sh'.
-
-   If you are not root, you should choose a `--prefix' argument that
-points into your home directory, eg.
-
-       ./configure --prefix=$HOME/usr
-
-   In this case, you have to insert the contents of
-`buildscripts/out/lilypond-login' or
-`buildscripts/out/lilypond-profile' into your start up scripts by hand.
-
-Configuring for multiple platforms
-----------------------------------
-
-   If you want to build multiple versions of LilyPond with different
-configuration settings, you can use the `--enable-config=CONF' option
-of configure.  You should use `make conf=CONF' to generate the output
-in `out-CONF'.  Example: suppose I want to build with and without
-profiling.  Then I'd use the following for the normal build,
-
-           ./configure --prefix=~ --enable-checking
-           make
-           make install
-
-   and for the profiling version, I specify a different configuration.
-
-
-           ./configure --prefix=~ --enable-profiling --enable-config=prof --disable-checking
-           make conf=prof
-           make conf=prof install
-
-Emacs mode
-==========
-
-   An Emacs mode for entering music and running LilyPond is included
-with the source archive as `lilypond-mode.el' and
-`lilypond-font-lock.el'.  You should install these files somewhere in
-your LOAD-PATH.  If you have installed a precompiled LilyPond package,
-these files can be found in `/usr/share/doc/lilypond-x.y.z/'.

 
 

-   Add this to your `~/.emacs' or `~/.emacs.el', or install this file
-in Emacs' `site-start.d':
-         ;;; lilypond-init.el --- Startup code for LilyPond mode
-     
-         (load-library "lilypond-mode.el")
-         (setq auto-mode-alist
-           (cons '("\\.ly$" . LilyPond-mode) auto-mode-alist))
-         (add-hook 'LilyPond-mode-hook (lambda () (turn-on-font-lock)))
+   This will install a number of files, something close to:

 
 

-   If you have the latest LilyPond-1.4.x Debian package, LilyPond-mode
-is automatically loaded, you not even need to modify your `~/.emacs'
-file.
+       /usr/local/man/man1/mi2mu.1
+       /usr/local/man/man1/convert-mudela.1
+       /usr/local/man/man1/mudela-book.1
+       /usr/local/man/man1/lilypond.1
+       /usr/local/bin/lilypond
+       /usr/local/bin/mi2mu
+       /usr/local/bin/convert-mudela
+       /usr/local/bin/mudela-book
+       /usr/local/bin/abc2ly
+       /usr/local/share/lilypond/*
+       /usr/local/share/locale/{it,nl}/LC_MESSAGES/lilypond.mo

 
 

-Compiling for distributions
-===========================
+   The above assumes that you are root and have the GNU development
+tools, and your make is GNU make.  If this is not the case, you can
+adjust your environment variables to your taste:

 
 

-Red Hat Linux
--------------

 
 

-   Red Hat 7.0 i386 RPMS are available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'.
+       export CPPFLAGS="-I /home/me/my_include -DWEIRD_FOOBAR"
+       ./configure

 
 

-   You can also compile them yourself.  A spec file is in
-`make/out/lilypond.redhat.spec'. This file is distributed along with
-the sources.  You can make the rpm by issuing
+   `CPPFLAGS' are the preprocessor flags.

 
 

-             tar xfz lilypond-x.y.z.tar.gz
-       rpm -bb lilypond-x.y.z/make/out/lilypond.redhat.spec
-       rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z
+   The configure script is Cygnus configure, and it will accept
+`--help'. If you are not root, you will probably have to make it with a
+different `--prefix' option.  Our favourite location is

 
 

-   For running on a Red Hat system you need these packages: guile,
-tetex, tetex-latex, tetex-dvips, libstdc++, python, ghostscript.

 
 

-   For compilation on a Red Hat system you need these packages, in
-addition to the those needed for running: glibc-devel, gcc-c++,
-libstdc++-devel, guile-devel, flex, bison, texinfo, tetex-devel, groff,
-libgr-progs.
-
-   Warning
+       ./configure --prefix=$HOME/usr

 
 

-   There appears to be a problem with the Xdvi shipped with Red Hat 7.1.
-Symptoms: Xdvi responds very sluggishly or hangs while viewing lilypond
-output. The cause for this problem is unknown; you are advised to
-recompile Xdvi from source.
+   In this case, you will have to set up MFINPUTS, and TEXINPUTS
+accordingly.

 
 

-LinuxPPC
---------
+   Since GNU LilyPond currently is beta, you are advised to also use

 
 

-   Some LinuxPPC RPMS should available from
-`ftp://ftp.cs.uu.nl/pub/GNU/LilyPond/binaries/'.

 
 

-   A LinuxPPC RPM can be made using the `lilypond.redhat.spec' file.
+       --enable-debugging
+       --enable-checking

 
 

-SuSE
-----
+   Options to configure include:

 
 

-   Some SUSE RPMS should available from
-`ftp://ftp.lilypond.org/pub/LilyPond/binaries/SuSE'.
+``--enable-printing''
+     Enable debugging print routines (lilypond `-D' option)

 
 

-   You can also compile a RPM for SUSE yourself.  A spec file is in
-`make/out/lilypond.suse.spec', see the instructions for building the
-Red Hat RPM.
+``--enable-optimise''
+     Set maximum optimisation: compile with `-O2'.  This can be
+     unreliable on some compiler/platform combinations (eg, DEC Alpha
+     and PPC)

 
 

-   You must have the following packages: guile tcsh tetex te_latex
-te_kpath te_mpost libpng python gpp libgpp gettext autoconf netpbm
-libnetpb gs_serv gs_lib gs_fonts guile
+``--enable-profiling''
+     Compile with support for profiling.

 
 

-Slackware
----------
+``--enable-config''
+     Output to a different configuration file.  Needed for
+     multi-platform     builds

 
 

-   No precompiled packages for Slackware are available.
+   All options are documented in the `configure' help The option
+`--enable-optimise' is recommended for Real Life usage.

 
 

-   Problems have been reported with Slackware 7.0; apparently, it ships
-with a faulty compiler. Do not compile LilyPond with -O2 on this
-platform.
+   If you do

 
 

-Mandrake
---------

 
 

-   Some binaries are available at rpmfind.net. Refer to
-`http://rpmfind.net/linux/mandrake/cooker/contrib/RPMS/'.
+       make all

 
 

-   You can also compile a RPM for Mandrake yourself.  A spec file is in
-`make/out/lilypond.mandrake.spec', see the instructions for building
-the Red Hat RPM.
+   everything will be compiled, but nothing will be installed.  The
+resulting binaries can be found in the subdirectories `out/' (which
+contain all files generated during compilation).

 
 

-Debian GNU/Linux
-----------------
+Configuring for multiple platforms
+==================================

 
 

-   A Debian package is also available.  You may install it easily by
-running `apt-get' as root:
+   If you want to compile LilyPond with different configuration
+settings, then, you can use the `--enable-config' option.  Example:
+suppose I want to build with and   without profiling.  Then I'd use the
+following for the normal build,

 
 

-       apt-get install lilypond lilypond-doc

 
 

-   You can also compile the .deb for Debian yourself, do:
+           ./configure --prefix=~ --disable-optimise --enable-checking
+           make
+           make install

 
 

-       apt-get -b source lilypond
+   and for the profiling version, I specify a different configuration.

 
 

-   If you're real impatient, you may even do:

 
 

-       cd lilypond-x.y.z   # a previous version
-             uscan               # download and build latest directly from upstream
+           ./configure --prefix=~ --enable-profiling --enable-config=optprof --enable-optimise --disable-checking
+           make config=optprof
+           make config=optprof install

 
 

-   Debian's TeX installation is a bit short on memory, you may want to
-increase it like this:
-     --- /etc/texmf/texmf.cnf.dpkg     Sun Jan 28 14:12:14 2001
-     +++ /etc/texmf/texmf.cnf  Fri Apr 27 11:09:35 2001
-     @ -384,8 +384,8 @
-      main_memory.context = 1500000
-      main_memory.mpost = 1000000
-      main_memory = 263000 % words of inimemory available; also applies to inimf&mp
-     -extra_mem_top = 0    % extra high memory for chars, tokens, etc.
-     -extra_mem_bot = 0    % extra low memory for boxes, glue, breakpoints, etc.
-     +extra_mem_top = 100000    % extra high memory for chars, tokens, etc.
-     +extra_mem_bot = 100000    % extra low memory for boxes, glue, breakpoints, etc.
-     
-      obj_tab_size.context = 256000
+Installing
+==========

 
 

-   You could also export `extra_mem_top' and `extra_mem_bot' as
-environment variables if you do not want to or cannot modify
-`/etc/texmf/texmf.cnf'.
+   if you have done a successful `make', then a simple

 
 

-   Alternatively, visit

 
 

-   * http://packages.debian.org/lilypond
-     (http://packages.debian.org/lilypond)
+       make install

 
 

-   * http://people.debian.org/~foka/lilypond/
-     (http://people.debian.org/~foka/lilypond/) for latest
-     semi-unofficial build of LilyPond 1.4.2 for Debian 2.2 (potato)
-     users.  The official stable Debian 2.2 is stuck with the old
-     LilyPond-1.3.24.  Since LilyPond-1.4 has been released, the older
-     lilypond1.3 Debian package is now obsolete.
+   should do the trick.

 
 

-   Please contact Anthony Fok <lilypond@packages.debian.org> for more
-information.
+   If you are doing an upgrade, please remember to remove obsolete
+`.pk' and `.tfm' files of the fonts.  A script has been provided to do
+the work for you, see `bin/clean-fonts.sh'.

 
 

-   The build scripts are in the subdirectory `debian/'; you can make
-the .deb by doing, for example:
+Redhat linux
+============

 
 

-       $ su - root
-       # dpkg --purge lilypond lilypond1.3
-       # exit
-       $ tar xzf lilypond-1.4.3.tar.gz
-       $ cd lilypond-1.4.3
-       $ dch -p -v 1.4.3-0.local.1 "Local build."
-       $ debuild -B
-       $ su - root
-       # dpkg -i ../lilypond_1.4.3*.deb
-       # exit
-       $
+   RedHat Linux users can compile an RPM. A spec file is in
+`make/out/lilypond.spec', it is distributed along with the sources.

 
 

-   Use command `debuild' instead of `debuild -B' if you have a very
-fast machine and want to build the HTML, PS and DVI documentation too.
+   You can make the rpm by issuing

 
 

-   For compilation on a Debian GNU/Linux system you need these packages,
-in addition to the those needed for running:
+       rpm -tb lilypond-x.y.z.tar.gz
+       rpm -i /usr/src/redhat/RPMS/i386/lilypond-x.y.z

 
 

-   * g++, cpp, libc6-dev, libstdc++<YOUR-LIBSTDC++-VERSION-HERE>-dev
+   Precompiled i386 RedHat RPMS are available from
+ftp://freshmeat.net/pub/rpms/lilypond/
+(ftp://freshmeat.net/pub/rpms/lilypond/) and
+http://linux.umbc.edu/software/lilypond/rpms/
+(http://linux.umbc.edu/software/lilypond/rpms/).

 
 

-   * libguile<YOUR-LIBGUILE-VERSION-HERE>-dev
+   For compilation on a RedHat system you need these packages, in
+addition to the those needed for running:
+   * glibc-devel

 
 

-   * make, m4, flex, bison
+   * libstdc++-devel

 
 

-   * gettext
+   * guile-devel

 
 

-   * groff, texinfo
+   * flex

 
 

-   * bibtex2html (not in Debian 2.2)
+   * bison

 
 

-   * tetex-base, tetex-bin, tetex-extra, libkpathsea-dev or tetex-dev
+   * texinfo

 
 

-   * dpkg-dev, debhelper, fakeroot
+Debian GNU/linux
+================

 
 

-   * gs, netpbm
+   A Debian package is also available; contact Anthony Fok
+<foka@debian.org>.  The build scripts are in the subdirectory `debian/'.

 
 

-   * pnmtopng (only in Debian 2.2; pnmtopng has been merged with netpbm
-      in Debian testing/unstable.)
+Windows NT/95
+=============

 
 

-   Most of these are listed on the `Build-Depends' line in the
-`debian/control' file.  To ensure the creation of the lilypond deb is
-trouble-free, we recommend that you first install the following packages
-by running \`apt-get' as root before building the package:
+   Separate instructions on building for W32 are available; See the
+files in `Documentation/ntweb/', included with the sources.

 
 

-   For Debian 2.2:
+Problems
+========

 
 

-       apt-get install task-debian-devel task-c++-dev \
-               python-base libguile6-dev tetex-bin tetex-dev \
-               tetex-extra flex bison texinfo groff gs \
-               netpbm pnmtopng m4 gettext
+   For help and questions use <help-gnu-music@gnu.org> and
+<gnu-music-discuss@gnu.org>.  Please consult the faq before mailing
+your problems.

 
 

-   For Debian in development ("unstable", the future 2.3 or 3.0):
+   If you find bugs, please send bug reports to <bug-gnu-music@gnu.org>.

 
 

-       apt-get install task-debian-devel task-c++-dev \
-               python-base libguile9-dev tetex-bin libkpathsea-dev \
-               tetex-extra flex bison texinfo bibtex2html groff gs \
-               netpbm m4 gettext
+   Known bugs that are LilyPond's fault are listed in `TODO', or
+demonstrated in `input/bugs/'.

 
 

-   And, just so that old fonts from previous versions of LilyPond won't
-interfere with your build, you may want to do this before the build too:
+   Known bugs that are not LilyPond's fault are documented here.

 
 

-       dpkg --purge lilypond lilypond1.3
+LinuxPPC Bugs:
+**************

 
 

-Problems
-========
+   * egcs-1.1.2-12c (stock LinuxPPC R5) has a serious bug, upgrade to
+     fixed in egcs-1.1.2-12f or gcc-2.95-0a,
+     `ftp://dev.linuxppc.org/users/fsirl/R5/RPMS/ppc/'

 
 

-   For help and questions use <lilypond-user@gnu.org>.  Please consult
-the FAQ before mailing your problems.  If you find bugs, please send
-bug reports to <bug-lilypond@gnu.org>.
+   * egcs-1.0.2 (LinuxPPC R4): all compiling with `-O2' is suspect, in
+     particular guile-1.3, and Lily herself will break.

 
 

-   Bugs that are not fault of LilyPond are documented here.
+Linux-i386
+**********

 
 

-FLex-2.5.4a and gcc-3.0
------------------------
+   * SuSE6.2 and similar platforms (glibc 2.1, libstdc++ 2.9.0)

 
 

-   Flex 2.5.4a does not produce g++-3.0 compliant C++ code.  To compile
-LilyPond with gcc-3.0 you may do:
+     Lily will crash during parsing (which suggests a C++ library
+     incompatibility).  Precise cause, precise platform description or
+     solution are not known.

 
 

-             CC=gcc-3.0 CXX=g++-3.0 ./configure --enable-config=gcc-3.0
-             make conf=gcc-3.0 -C lily out-gcc-3.0/lexer.cc
-             patch -p1 < lexer-gcc-3.0.patch
-             make conf=gcc-3.0 -C lily
+     Note that this only happens on some computers with the said
+     platform.

 
 

-   Note that this is fixed in Debian/unstable for flex >= 2.5.4a-13.
+   * libg++ 2.7

 
 

-NetBSD
-------
+     LilyPond occasionally crashes while parsing the initialisation
+     files.  This is a very obscure bug, and usually entering the
+     commandline differently "fixes" it.

 
 

-   * The flex precompiled in NetBSD-1.4.2 is broken.  Download
-     flex-2.5.4a, build, install.
+               lilypond input.ly

 
 

-   * The configuration of Gcc (egcs-2.91.60 19981201 (egcs-1.1.1
-     release)) does not include `/usr/pkg' paths.  Configure using:
+     and
+               lilypond -I. ./input.ly
+     makes a difference

 
 

-          CFLAGS='-I /usr/pkg/include' LDFLAGS='-L/usr/pkg/lib' ./configure
+     Typical stacktrace:
+               SIGSEGV
+               __libc_malloc (bytes=16384)
+               ?? ()
+               yyFlexLexer::yy_create_buffer ()
+               Includable_lexer::new_input (this=0x8209a00, s={strh_ = {

 
 

+     This behaviour has been observed with machines that have old libg++
+     versions (LinuxPPC feb '98, RedHat 4.x).

 
 Solaris:
 
 Solaris:

---------
+********

 
    * Sparc64/Solaris 2.6, GNU make-3.77
 
 
    * Sparc64/Solaris 2.6, GNU make-3.77
 


@@ -544,7 +391,7 @@ Solaris:
      Not yet resolved.
 
 AIX
      Not yet resolved.
 
 AIX

----
+***

 
    * AIX 4.3 ld
 
 
    * AIX 4.3 ld
 


@@ -552,7 +399,7 @@ AIX
              Some versions of the AIX binder (linker) can fail with a
           relocation    overflow severe error when the -bbigtoc option
           is used to link    GCC-produced object files into an
              Some versions of the AIX binder (linker) can fail with a
           relocation    overflow severe error when the -bbigtoc option
           is used to link    GCC-produced object files into an

-          executable that overflows the TOC.     A fix for APAR IX75823
+          executable that overflows the TOC. A    fix for APAR IX75823

           (OVERFLOW DURING LINK WHEN USING GCC AND    -BBIGTOC) is
           available from IBM Customer Support and from its
           27service.boulder.ibm.com website as PTF U455193.
           (OVERFLOW DURING LINK WHEN USING GCC AND    -BBIGTOC) is
           available from IBM Customer Support and from its
           27service.boulder.ibm.com website as PTF U455193.