-The global layout is determined by three factors: the page layout, the
-line breaks, and the spacing. These all influence each other. The
-choice of spacing determines how densely each system of music is set.
-This influences where line breaks are chosen, and thus ultimately, how
-many pages a piece of music takes.
-
-Globally spoken, this procedure happens in three steps: first,
-flexible distances (``springs'') are chosen, based on durations. All
-possible line breaking combinations are tried, and the one with the
-best results -- a layout that has uniform density and requires as
-little stretching or cramping as possible -- is chosen.
-
-After spacing and linebreaking, the systems are distributed across
-pages, taking into account the size of the page, and the size of the
-titles.
-
-
-
-@menu
-* Setting global staff size::
-* Paper size::
-* Page layout::
-* Vertical spacing::
-* Vertical spacing of piano staves::
-* Horizontal spacing::
-* Line length::
-* Line breaking::
-* Page breaking::
-* Multiple movements::
-* Creating titles::
-@end menu
-
-
-@node Setting global staff size
-@subsection Setting global staff size
-
-@cindex font size, setting
-@cindex staff size, setting
-@cindex @code{layout} file
-
-To set the global staff size, use @code{set-global-staff-size}.
-
-@example
-#(set-global-staff-size 14)
-@end example
-
-@noindent
-This sets the global default size to 14pt staff height and scales all
-fonts accordingly.
-
-The Feta font provides musical symbols at eight different
-sizes. Each font is tuned for a different staff size: at a smaller size
-the font becomes heavier, to match the relatively heavier staff lines.
-The recommended font sizes are listed in the following table:
-
-@quotation
-@multitable @columnfractions .15 .2 .22 .2
-
-@item @b{font name}
-@tab @b{staff height (pt)}
-@tab @b{staff height (mm)}
-@tab @b{use}
-
-@item feta11
-@tab 11.22
-@tab 3.9
-@tab pocket scores
-
-@item feta13
-@tab 12.60
-@tab 4.4
-@tab
-
-@item feta14
-@tab 14.14
-@tab 5.0
-@tab
-
-@item feta16
-@tab 15.87
-@tab 5.6
-@tab
-
-@item feta18
-@tab 17.82
-@tab 6.3
-@tab song books
-
-@item feta20
-@tab 20
-@tab 7.0
-@tab standard parts
-
-@item feta23
-@tab 22.45
-@tab 7.9
-@tab
-
-@item feta26
-@tab 25.2
-@tab 8.9
-@tab
-@c modern rental material?
-
-@end multitable
-@end quotation
-
-These fonts are available in any sizes. The context property
-@code{fontSize} and the layout property @code{staff-space} (in
-@internalsref{StaffSymbol}) can be used to tune the size for individual
-staves. The sizes of individual staves are relative to the global size.
-
-@example
-
-@end example
-
-@seealso
-
-This manual: @ref{Selecting font sizes}.
-
-
-@node Paper size
-@subsection Paper size
-
-@cindex paper size
-@cindex page size
-@cindex @code{papersize}
-
-To change the paper size, there are two equal commands,
-@example
-#(set-default-paper-size "a4")
-\paper @{
- #(set-paper-size "a4")
-@}
-@end example
-
-The first command sets the size of all pages. The second command sets the size
-of the pages that the @code{\paper} block applies to -- if the @code{\paper}
-block is at the top of the file, then it will apply to all pages. If the
-@code{\paper} block is inside a @code{\score}, then the paper size will only
-apply to that score.
-
-The following paper sizes are supported: @code{a6}, @code{a5}, @code{a4},
-@code{a3}, @code{legal}, @code{letter}, @code{tabloid}.
-
-@cindex orientation
-@cindex landscape
-
-If the symbol @code{landscape} is supplied as an argument to
-@code{set-default-paper-size}, the pages will be rotated by 90 degrees,
-and wider line widths will be set correspondingly.
-
-@example
-#(set-default-paper-size "a6" 'landscape)
-@end example
-
-
-@node Page layout
-@subsection Page layout
-
-@cindex page layout
-@cindex margins
-@cindex header, page
-@cindex footer, page
-
-LilyPond will do page layout, set margins, and add headers and
-footers to each page.
-
-The default layout responds to the following settings in the
-@code{\paper} block.
-
-@cindex \paper
-
-@quotation
-@table @code
-@item firstpagenumber
-The value of the page number of the first page. Default is@tie{}1.
-
-@item printfirstpagenumber
-If set to true, will print the page number in the first page. Default is
-false.
-
-@item hsize
-The width of the page.
-
-@item vsize
-The height of the page.
-
-@item topmargin
-Margin between header and top of the page.
-
-@item bottommargin
-Margin between footer and bottom of the page.
-
-@item leftmargin
-Margin between the left side of the page and the beginning of the music.
-
-@item linewidth
-The length of the systems.
-
-@item headsep
-Distance between the top-most music system and the page header.
-
-@item footsep
-Distance between the bottom-most music system and the page footer.
-
-@item raggedbottom
-If set to true, systems will not be spread across the page.
-
-This should be set false for pieces that have only two or three
-systems per page, for example orchestral scores.
-
-@item raggedlastbottom
-If set to false, systems will be spread to fill the last page.
-
-Pieces that amply fill two pages or more should have this set to
-true.
-
-@item betweensystemspace
-This dimensions determines the distance between systems. It is the
-ideal distance between the center of the bottom staff of one system
-and the center of the top staff of the next system.
-
-Increasing this will provide a more even appearance of the page at the
-cost of using more vertical space.
-
-@item betweensystempadding
-This dimension is the minimum amount of white space that will always
-be present between the bottom-most symbol of one system, and the
-top-most of the next system.
-
-Increasing this will put systems whose bounding boxes almost touch
-farther apart.
-
-@item aftertitlespace
-Amount of space between the title and the first system.
-
-@item beforetitlespace
-Amount of space between the last system of the previous piece and the
-title of the next.
-
-@item betweentitlespace
-Amount of space between consecutive titles (e.g., the title of the
-book and the title of a piece).
-
-@item systemSeparatorMarkup
-This contains a markup object, which will be inserted between
-systems. This is often used for orchestral scores.
-
-The markup command @code{\slashSeparator} is provided as a sensible
-default, for example
-
-@lilypond[raggedright]
-\paper {
- systemSeparatorMarkup = \slashSeparator
-}
-
-\relative { c1 \break c1 }
-@end lilypond
-
-
-@end table
-@end quotation
-
-Example:
-
-@example
-\paper@{
- hsize = 2\cm
- topmargin = 3\cm
- bottommargin = 3\cm
- raggedlastbottom = ##t
-@}
-@end example
-
-You can also define these values in Scheme. In that case @code{mm},
-@code{in}, @code{pt}, and @code{cm} are variables defined in
-@file{paper-defaults.ly} with values in millimeters. That's why the
-value has to be multiplied in the example
-
-@example
-\paper @{
- #(define bottommargin (* 2 cm))
-@}
-@end example
-
-@cindex copyright
-@cindex tagline
-
-The default footer is empty, except for the first page, where the
-@code{copyright} field from @code{\header} is inserted, and the last
-page, where @code{tagline} from @code{\header} is added. The default
-tagline is ``Engraved by LilyPond (@var{version})''.@footnote{Nicely
-printed parts are good PR for us, so please leave the tagline if you
-can.}
-
-The header and footer are created by the functions @code{make-footer}
-and @code{make-header}, defined in @code{\paper}. The default
-implementations are in @file{scm/@/page@/-layout@/.scm}.
-
-The following settings influence the header and footer layout.
-
-@quotation
-@table @code
-@item printpagenumber
- this boolean controls whether a pagenumber is printed.
-@end table
-@end quotation
-
-The page layout itself is done by two functions in the
-@code{\paper} block, @code{page-music-height} and
-@code{page-make-stencil}. The former tells the line-breaking algorithm
-how much space can be spent on a page, the latter creates the actual
-page given the system to put on it.
-
-
-@refbugs
-
-The option rightmargin is defined but doesn't set the right margin
-yet. The value for the right margin has to be defined adjusting the
-values of the leftmargin and linewidth.
-
-The default page header puts the page number and the @code{instrument}
-field from the @code{\header} block on a line.
-
-
-@node Vertical spacing
-@subsection Vertical spacing
-
-@cindex vertical spacing
-@cindex distance between staves
-@cindex staff distance
-@cindex between staves, distance
-@cindex staves per page
-@cindex space between staves
-
-The height of each system is determined automatically. To prevent
-systems from bumping into each other, some minimum distances are set.
-By changing these, you can put staves closer together, and thus put
-more systems onto one page.
-
-Normally staves are stacked vertically. To make staves maintain a
-distance, their vertical size is padded. This is done with the
-property @code{minimumVerticalExtent}. It takes a pair of numbers, so
-if you want to make it smaller than its default @code{#'(-4 . 4)},
-then you could set
-
-@example
-\set Staff.minimumVerticalExtent = #'(-3 . 3)
-@end example
-
-@noindent
-This sets the vertical size of the current staff to 3 staff spaces on
-either side of the center staff line. The argument of
-@code{minimumVerticalExtent} is interpreted as an interval, where the
-center line is the 0, so the first number is generally negative. The
-staff can be made larger at the bottom by setting it to @code{(-6 . 4)}.
-
-To change the amount of space between systems, use
-@code{betweensystemspace}. A score with only one staff is still
-considered to have systems, so setting @code{betweensystemspace}
-will be much more useful than changing @code{minimumVerticalExtent}.
-
-@example
-\layout @{
- betweensystemspace = 10\mm
-@}
-@end example
-
-
-@seealso
-
-Internals: Vertical alignment of staves is handled by the
-@internalsref{VerticalAlignment} object.
-
-@refbugs
-
-@code{minimumVerticalExtent} is syntactic sugar for setting
-@code{minimum-Y-extent} of the @internalsref{VerticalAxisGroup} of the
-current context. It can only be changed score wide.
-
-
-
-
-@node Vertical spacing of piano staves
-@subsection Vertical spacing of piano staves
-
-The distance between staves of a @internalsref{PianoStaff} cannot be
-computed during formatting. Rather, to make cross-staff beaming work
-correctly, that distance has to be fixed beforehand.
-
-The distance of staves in a @code{PianoStaff} is set with the
-@code{forced-distance} property of the
-@internalsref{VerticalAlignment} object, created in
-@internalsref{PianoStaff}.
-
-It can be adjusted as follows
-@example
-\new PianoStaff \with @{
- \override VerticalAlignment #'forced-distance = #7
-@} @{
- ...
-@}
-@end example
-
-@noindent
-This would bring the staves together at a distance of 7 staff spaces,
-measured from the center line of each staff.
-
-The difference is demonstrated in the following example,
-@lilypond[quote,verbatim]
-\relative <<
- \new PianoStaff \with {
- \override VerticalAlignment #'forced-distance = #7
- } <<
- \new Staff { c1 }
- \new Staff { c }
- >>
- \new PianoStaff <<
- \new Staff { c }
- \new Staff { c }
- >>
->>
-@end lilypond
-
-
-
-@refbugs
-
-@code{forced-distance} cannot be changed per system.
-
-
-@node Horizontal spacing
-@subsection Horizontal Spacing
-
-The spacing engine translates differences in durations into
-stretchable distances (``springs'') of differring lengths. Longer
-durations get more space, shorter durations get less. The shortest
-durations get a fixed amount of space (which is controlled by
-@code{shortest-duration-space} in the @internalsref{SpacingSpanner} object).
-The longer the duration, the more space it gets: doubling a
-duration adds a fixed amount (this amount is controlled by
-@code{spacing-increment}) of space to the note.
-
-For example, the following piece contains lots of half, quarter, and
-8th notes; the eighth note is followed by 1 note head width (NHW).
-The quarter note is followed by 2 NHW, the half by 3 NHW, etc.
-
-@lilypond[quote,fragment,verbatim,relative=1]
-c2 c4. c8 c4. c8 c4. c8 c8
-c8 c4 c4 c4
-@end lilypond
-
-Normally, @code{spacing-increment} is set to 1.2 staff space, which is
-approximately the width of a note head, and
-@code{shortest-duration-space} is set to 2.0, meaning that the
-shortest note gets 2.4 staff space (2.0 times the
-@code{spacing-increment}) of horizontal space. This space is counted
-from the left edge of the symbol, so the shortest notes are generally
-followed by one NHW of space.
-
-If one would follow the above procedure exactly, then adding a single
-32nd note to a score that uses 8th and 16th notes, would widen up the
-entire score a lot. The shortest note is no longer a 16th, but a 32nd,
-thus adding 1 NHW to every note. To prevent this, the shortest
-duration for spacing is not the shortest note in the score, but rather
-the one which occurs most frequently.
-
-
-The most common shortest duration is determined as follows: in every
-measure, the shortest duration is determined. The most common shortest
-duration is taken as the basis for the spacing, with the stipulation
-that this shortest duration should always be equal to or shorter than
-an 8th note. The shortest duration is printed when you run
-@code{lilypond} with the @code{--verbose} option.
-
-These durations may also be customized. If you set the
-@code{common-shortest-duration} in @internalsref{SpacingSpanner}, then
-this sets the base duration for spacing. The maximum duration for this
-base (normally an 8th), is set through @code{base-shortest-duration}.
-
-@cindex @code{common-shortest-duration}
-@cindex @code{base-shortest-duration}
-@cindex @code{stem-spacing-correction}
-@cindex @code{spacing}
-
-Notes that are even shorter than the common shortest note are
-followed by a space that is proportional to their duration relative to
-the common shortest note. So if we were to add only a few 16th notes
-to the example above, they would be followed by half a NHW:
-
-@lilypond[quote,fragment,verbatim,relative=2]
-c2 c4. c8 c4. c16[ c] c4. c8 c8 c8 c4 c4 c4
-@end lilypond
-
-
-In the introduction (see @ref{Engraving}), it was explained that stem
-directions influence spacing. This is controlled with the
-@code{stem-spacing-correction} property in the
-@internalsref{NoteSpacing}, object. These are generated for every
-@internalsref{Voice} context. The @code{StaffSpacing} object
-(generated in @internalsref{Staff} context) contains the same property
-for controlling the stem/bar line spacing. The following example shows
-these corrections, once with default settings, and once with
-exaggerated corrections:
-
-@lilypond[quote,raggedright]
-{
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
- \override Staff.NoteSpacing #'stem-spacing-correction = #1.5
- \override Staff.StaffSpacing #'stem-spacing-correction = #1.5
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
-}
-@end lilypond
-
-
-@seealso
-
-Internals: @internalsref{SpacingSpanner}, @internalsref{NoteSpacing},
-@internalsref{StaffSpacing}, @internalsref{SeparationItem}, and
-@internalsref{SeparatingGroupSpanner}.
-
-@refbugs
-
-Spacing is determined on a score wide basis. If you have a score that
-changes its character (measured in durations) halfway during the
-score, the part containing the longer durations will be spaced too
-widely.
-
-There is no convenient mechanism to manually override spacing. The
-following work-around may be used to insert extra space into a score.
-@example
- \once \override Score.SeparationItem #'padding = #1
-@end example
-
-No work-around exists for decreasing the amount of space.
-
-@node Line length
-@subsection Line length
-
-@cindex page breaks
-@cindex breaking pages
-
-@cindex @code{indent}
-@cindex @code{linewidth}
-
-@c Although linewidth can be set in \layout, it should be set in paper
-@c block, to get page layout right.
-@c Setting indent in \paper block makes not much sense, but it works.
-
-@c Bit verbose and vague, use examples?
-The most basic settings influencing the spacing are @code{indent} and
-@code{linewidth}. They are set in the @code{\layout} block. They
-control the indentation of the first line of music, and the lengths of
-the lines.
-
-If @code{raggedright} is set to true in the @code{\layout} block, then
-the lines are justified at their natural length. This is useful for
-short fragments, and for checking how tight the natural spacing is.
-
-@cindex page layout
-@cindex vertical spacing
-
-The option @code{raggedlast} is similar to @code{raggedright}, but
-only affects the last line of the piece. No restrictions are put on
-that line. The result is similar to formatting text paragraphs. In a
-paragraph, the last line simply takes its natural length.
-@c Note that for text there are several options for the last line.
-@c While Knuth TeX uses natural length, lead typesetters use the same
-@c stretch as the previous line. eTeX uses \lastlinefit to
-@c interpolate between both these solutions.
-
-@node Line breaking
-@subsection Line breaking
-
-@cindex line breaks
-@cindex breaking lines
-
-Line breaks are normally computed automatically. They are chosen so
-that lines look neither cramped nor loose, and that consecutive lines
-have similar density.
-
-Occasionally you might want to override the automatic breaks; you can
-do this by specifying @code{\break}. This will force a line break at
-this point. Line breaks can only occur at places where there are bar
-lines. If you want to have a line break where there is no bar line,
-you can force an invisible bar line by entering @code{\bar
-""}. Similarly, @code{\noBreak} forbids a line break at a
-point.
-
-
-@cindex regular line breaks
-@cindex four bar music.
-
-For line breaks at regular intervals use @code{\break} separated by
-skips and repeated with @code{\repeat}:
-@example
-<< \repeat unfold 7 @{
- s1 \noBreak s1 \noBreak
- s1 \noBreak s1 \break @}
- @emph{the real music}
->>
-@end example
-
-@noindent
-This makes the following 28 measures (assuming 4/4 time) be broken every
-4 measures, and only there.
-
-@refcommands
-
-@code{\break}, and @code{\noBreak}.
-@cindex @code{\break}
-@cindex @code{\noBreak}
-
-@seealso
-
-Internals: @internalsref{BreakEvent}.
-
-
-@node Page breaking
-@subsection Page breaking
-
-The default page breaking may be overriden by inserting
-@code{\pageBreak} or @code{\noPageBreak} commands. These commands are
-analogous to @code{\break} and @code{\noBreak}. They should be
-inserted at a bar line. These commands force and forbid a page-break
-from happening. Of course, the @code{\pageBreak} command also forces
-a line break.
-
-Page breaks are computed by the @code{page-breaking} function in the
-@code{\paper} block.
-
-@refcommands
-
-@cindex @code{\pageBreak}
-@code{\pageBreak}
-@cindex @code{\noPageBreak}
-@code{\noPageBreak}
-
-
-@node Multiple movements
-@subsection Multiple movements
-
-@cindex bibliographic information
-@cindex titles
-@cindex composer
-@cindex Engraved by LilyPond
-
-A document may contain multiple pieces of music. Examples of these
-are an etude book, or an orchestral part with multiple movements.
-Each movement is entered with a @code{\score} block,
projects / lilypond.git / blobdiff