-The text @code{raised} is now raised relative to the empty string
-@code{""} which is not visible. Alternatively, complete objects can
-be moved with layout properties such as @code{padding} and
-@code{extra-offset}.
-
-
-
-@seealso
-
-Init files: @file{scm/new-markup.scm}.
-
-
-@refbugs
-
-Text layout is ultimately done by @TeX{}, which does kerning of
-letters. LilyPond does not account for kerning, so texts will be
-spaced slightly too wide.
-
-Syntax errors for markup mode are confusing.
-
-Markup texts cannot be used in the titling of the @code{\header}
-field. Titles are made by La@TeX{}, so La@TeX{} commands should be used
-for formatting.
-
-
-
-@menu
-* Overview of text markup commands::
-@end menu
-
-@node Overview of text markup commands
-@subsection Overview of text markup commands
-
-@include markup-commands.tely
-
-
-@node Global layout
-@section Global layout
-
-The global layout determined by three factors: the page layout, the
-line breaks, and the spacing. These all influence each other. The
-choice of spacing determines how densely each system of music is set,
-which influences where line breaks are chosen, and thus
-ultimately how many pages a piece of music takes. This section
-explains how to tune the algorithm for spacing.
-
-Globally spoken, this procedure happens in three steps: first,
-flexible distances (``springs'') are chosen, based on durations. All
-possible line breaking combination are tried, and the one with the
-best results --- a layout that has uniform density and requires as
-little stretching or cramping as possible --- is chosen. When the score
-is processed by @TeX{}, each page is filled with systems, and page breaks
-are chosen whenever the page gets full.
-
-
-
-@menu
-* Setting global staff size::
-* Vertical spacing::
-* Horizontal spacing::
-* Line breaking::
-* Page layout::
-@end menu
-
-
-@node Setting global staff size
-@subsection Setting global staff size
-
-@cindex font size, setting
-@cindex staff size, setting
-@cindex @code{paper} file
-
-The Feta font provides musical symbols at eight different
-sizes. Each font is tuned for a different staff size: at a smaller size
-the font becomes heavier, to match the relatively heavier staff lines.
-The recommended font sizes are listed in the following table:
-
-@multitable @columnfractions .25 .25 .25 .25
-
-@item @b{font name}
-@tab @b{staff height (pt)}
-@tab @b{staff height (mm)}
-@tab @b{use}
-
-@item feta11
-@tab 11.22
-@tab 3.9
-@tab pocket scores
-
-@item feta13
-@tab 12.60
-@tab 4.4
-@tab
-
-@item feta14
-@tab 14.14
-@tab 5.0
-@tab
-
-@item feta16
-@tab 15.87
-@tab 5.6
-@tab
-
-@item feta18
-@tab 17.82
-@tab 6.3
-@tab song books
-
-@item feta20
-@tab 17.82
-@tab 7.0
-@tab standard parts
-
-@item feta23
-@tab 22.45
-@tab 7.9
-@tab
-
-@item feta26
-@tab 25.2
-@tab 8.9
-@tab
-@c modern rental material ?
-
-@end multitable
-
-These fonts are available in any sizes. The context property
-@code{fontSize} and the layout property @code{staff-space} (in
-@internalsref{StaffSymbol}) can be used to tune size for individual
-staves. The size of individual staves are relative to the global size,
-which can be set in the following manner:
-
-@example
- #(set-global-staff-size 14)
-@end example
-
-This sets the global default size to 14pt staff height, and scales all
-fonts accordingly.
-
-@seealso
-
-This manual: @ref{Selecting font sizes}.
-
-
-
-@menu
-* Vertical spacing::
-* Horizontal spacing::
-* Line breaking::
-* Page layout::
-@end menu
-
-@node Vertical spacing
-@subsection Vertical spacing
-
-@cindex vertical spacing
-@cindex distance between staves
-@cindex staff distance
-@cindex between staves, distance
-@cindex staves per page
-@cindex space between staves
-
-The height of each system is determined automatically by LilyPond, to
-keep systems from bumping into each other, some minimum distances are
-set. By changing these, you can put staves closer together, and thus
-put more systems onto one page.
-
-Normally staves are stacked vertically. To make
-staves maintain a distance, their vertical size is padded. This is
-done with the property @code{minimumVerticalExtent}. It takes a pair
-of numbers, so if you want to make it smaller from its, then you could
-set
-@example
- \set Staff.minimumVerticalExtent = #'(-4 . 4)
-@end example
-This sets the vertical size of the current staff to 4 staff spaces on
-either side of the center staff line. The argument of
-@code{minimumVerticalExtent} is interpreted as an interval, where the
-center line is the 0, so the first number is generally negative. The
-staff can be made larger at the bottom by setting it to @code{(-6
-. 4)}.
-
-The piano staves are handled a little differently: to make cross-staff
-beaming work correctly, it is necessary that the distance between staves
-is fixed beforehand. This is also done with a
-@internalsref{VerticalAlignment} object, created in
-@internalsref{PianoStaff}. In this object the distance between the
-staves is fixed by setting @code{forced-distance}. If you want to
-override this, use a @code{\context} block as follows:
-@example
- \paper @{
- \context @{
- \PianoStaff
- \override VerticalAlignment #'forced-distance = #9
- @}
- @dots{}
- @}
-@end example
-This would bring the staves together at a distance of 9 staff spaces,
-measured from the center line of each staff.
-
-@seealso
-
-Internals: Vertical alignment of staves is handled by the
-@internalsref{VerticalAlignment} object.
-
-
-
-
-@node Horizontal spacing
-@subsection Horizontal Spacing
-
-The spacing engine translates differences in durations into
-stretchable distances (``springs'') of differing lengths. Longer
-durations get more space, shorter durations get less. The shortest
-durations get a fixed amount of space (which is controlled by
-@code{shortest-duration-space} in the @internalsref{SpacingSpanner} object).
-The longer the duration, the more space it gets: doubling a
-duration adds a fixed amount (this amount is controlled by
-@code{spacing-increment}) of space to the note.
-
-For example, the following piece contains lots of half, quarter, and
-8th notes, the eighth note is followed by 1 note head width (NHW).
-The quarter note is followed by 2 NHW, the half by 3 NHW, etc.
-@lilypond[fragment,verbatim,relative=1] c2 c4. c8 c4. c8 c4. c8 c8
-c8 c4 c4 c4
-@end lilypond
-
-Normally, @code{shortest-duration-space} is set to 1.2, which is the
-width of a note head, and @code{shortest-duration-space} is set to
-2.0, meaning that the shortest note gets 2 NHW (i.e. 2 times
-@code{shortest-duration-space}) of space. For normal notes, this space
-is always counted from the left edge of the symbol, so the shortest
-notes are generally followed by one NHW of space.
-
-If one would follow the above procedure exactly, then adding a single
-32th note to a score that uses 8th and 16th notes, would widen up the
-entire score a lot. The shortest note is no longer a 16th, but a 32nd,
-thus adding 1 NHW to every note. To prevent this, the
-shortest duration for spacing is not the shortest note in the score,
-but the most commonly found shortest note. Notes that are even
-shorter this are followed by a space that is proportional to their
-duration relative to the common shortest note. So if we were to add
-only a few 16th notes to the example above, they would be followed by
-half a NHW:
-
-@lilypond[fragment,verbatim,relative=2]
- c2 c4. c8 c4. c16[ c] c4. c8 c8 c8 c4 c4 c4
-@end lilypond
-
-The most common shortest duration is determined as follows: in every
-measure, the shortest duration is determined. The most common short
-duration, is taken as the basis for the spacing, with the stipulation
-that this shortest duration should always be equal to or shorter than
-1/8th note. The shortest duration is printed when you run lilypond
-with @code{--verbose}. These durations may also be customized. If you
-set the @code{common-shortest-duration} in
-@internalsref{SpacingSpanner}, then this sets the base duration for
-spacing. The maximum duration for this base (normally 1/8th), is set
-through @code{base-shortest-duration}.
-
-@cindex @code{common-shortest-duration}
-@cindex @code{base-shortest-duration}
-@cindex @code{stem-spacing-correction}
-@cindex @code{spacing}
-
-In the Introduction it was explained that stem directions influence
-spacing. This is controlled with @code{stem-spacing-correction}
-property in @internalsref{NoteSpacing}, which are generated for every
-@internalsref{Voice} context. The @code{StaffSpacing} object
-(generated at @internalsref{Staff} context) contains the same property
-for controlling the stem/bar line spacing. The following example
-shows these corrections, once with default settings, and once with
-exaggerated corrections:
-
-@lilypond
- \score { \notes {
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
- \override Staff.NoteSpacing #'stem-spacing-correction = #1.5
- \override Staff.StaffSpacing #'stem-spacing-correction = #1.5
- c'4 e''4 e'4 b'4 |
- b'4 e''4 b'4 e''4|
- }
- \paper { raggedright = ##t } }
-@end lilypond
-
-@cindex SpacingSpanner, overriding properties
-
-Properties of the @internalsref{SpacingSpanner} must be overridden
-from the @code{\paper} block, since the @internalsref{SpacingSpanner} is
-created before any property commands are interpreted.
-@example
-\paper @{ \context @{
- \Score
- \override SpacingSpanner #'spacing-increment = #3.0
-@} @}
-@end example
-
-
-@seealso
-
-Internals: @internalsref{SpacingSpanner}, @internalsref{NoteSpacing},
-@internalsref{StaffSpacing}, @internalsref{SeparationItem}, and
-@internalsref{SeparatingGroupSpanner}.
-
-@refbugs
-
-Spacing is determined on a score wide basis. If you have a score that
-changes its character (measured in durations) halfway during the
-score, the part containing the longer durations will be spaced too
-widely.