1 % texinfo.tex -- TeX macros to handle Texinfo files.
3 % Load plain if necessary, i.e., if running under initex.
4 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
6 \def\texinfoversion{2003-12-07.11}
8 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
9 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
11 % This texinfo.tex file is free software; you can redistribute it and/or
12 % modify it under the terms of the GNU General Public License as
13 % published by the Free Software Foundation; either version 2, or (at
14 % your option) any later version.
16 % This texinfo.tex file is distributed in the hope that it will be
17 % useful, but WITHOUT ANY WARRANTY; without even the implied warranty
18 % of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 % General Public License for more details.
21 % You should have received a copy of the GNU General Public License
22 % along with this texinfo.tex file; see the file COPYING. If not, write
23 % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
24 % Boston, MA 02111-1307, USA.
26 % As a special exception, when this file is read by TeX when processing
27 % a Texinfo source document, you may use the result without
28 % restriction. (This has been our intent since Texinfo was invented.)
30 % Please try the latest version of texinfo.tex before submitting bug
31 % reports; you can get the latest version from:
32 % http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
33 % ftp://tug.org/tex/texinfo.tex
34 % (and all CTAN mirrors, see http://www.ctan.org).
35 % The texinfo.tex in any given distribution could well be out
36 % of date, so if that's what you're using, please check.
38 % Send bug reports to bug-texinfo@gnu.org. Please include including a
39 % complete document in each bug report with which we can reproduce the
40 % problem. Patches are, of course, greatly appreciated.
42 % To process a Texinfo manual with TeX, it's most reliable to use the
43 % texi2dvi shell script that comes with the distribution. For a simple
44 % manual foo.texi, however, you can get away with this:
49 % dvips foo.dvi -o # or whatever; this makes foo.ps.
50 % The extra TeX runs get the cross-reference information correct.
51 % Sometimes one run after texindex suffices, and sometimes you need more
52 % than two; texi2dvi does it as many times as necessary.
54 % It is possible to adapt texinfo.tex for other languages, to some
55 % extent. You can get the existing language-specific files from the
56 % full Texinfo distribution.
58 % The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
61 \message{Loading texinfo [version \texinfoversion]:}
63 % If in a .fmt file, print the version number
64 % and turn on active characters that we couldn't do earlier because
65 % they might have appeared in the input file name.
66 \everyjob{\message{[Texinfo version \texinfoversion]}%
67 \catcode`+=\active \catcode`\_=\active}
72 % We never want plain's \outer definition of \+ in Texinfo.
73 % For @tex, we can use \tabalign.
76 % Save some plain tex macros whose names we will redefine.
78 \let\ptexbullet=\bullet
86 \let\ptexfootnote=\footnote
90 \let\ptexindent=\indent
91 \let\ptexnoindent=\noindent
92 \let\ptexinsert=\insert
101 % If this character appears in an error message or help string, it
102 % starts a new line in the output.
105 % Use TeX 3.0's \inputlineno to get the line number, for better error
106 % messages, but if we're using an old version of TeX, don't do anything.
108 \ifx\inputlineno\thisisundefined
109 \let\linenumber = \empty % Pre-3.0.
111 \def\linenumber{l.\the\inputlineno:\space}
114 % Set up fixed words for English if not already set.
115 \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
116 \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
117 \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
118 \ifx\putwordin\undefined \gdef\putwordin{in}\fi
119 \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
120 \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
121 \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
122 \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
123 \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
124 \ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
125 \ifx\putwordof\undefined \gdef\putwordof{of}\fi
126 \ifx\putwordon\undefined \gdef\putwordon{on}\fi
127 \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
128 \ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
129 \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
130 \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
131 \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
132 \ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
133 \ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
135 \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
136 \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
137 \ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
138 \ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
139 \ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
140 \ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
141 \ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
142 \ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
143 \ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
144 \ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
145 \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
146 \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
148 \ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
149 \ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
150 \ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
151 \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
152 \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
154 % In some macros, we cannot use the `\? notation---the left quote is
155 % in some cases the escape char.
156 \chardef\colonChar = `\:
157 \chardef\commaChar = `\,
158 \chardef\dotChar = `\.
159 \chardef\exclamChar= `\!
160 \chardef\questChar = `\?
161 \chardef\semiChar = `\;
162 \chardef\spaceChar = `\ %
163 \chardef\underChar = `\_
169 % The following is used inside several \edef's.
170 \def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
172 % Make an outer definition into an inner one (due to Chris Thompson).
173 % The arguments should be the control sequence to be defined, and the
174 % new of the \outer control sequence, as characters; the control
175 % sequence #1 is defined to be just the same as \csname#2\endcsname, but
178 % For example, \innerdef\innernewcount{newcount} defines \innernewcount
179 % to be a non-outer version of \newcount.
181 \def\innerdef#1#2{\edef#1{\expandafter\noexpand\csname #2\endcsname}}%
183 \innerdef\innernewcount{newcount}%
186 \hyphenation{ap-pen-dix}
188 \hyphenation{mini-buf-fer mini-buf-fers}
189 \hyphenation{time-stamp}
190 \hyphenation{white-space}
192 % Margin to add to right of even pages, to left of odd pages.
193 \newdimen\bindingoffset
194 \newdimen\normaloffset
195 \newdimen\pagewidth \newdimen\pageheight
197 % For a final copy, take out the rectangles
198 % that mark overfull boxes (in case you have decided
199 % that the text looks ok even though it passes the margin).
201 \def\finalout{\overfullrule=0pt}
203 % @| inserts a changebar to the left of the current line. It should
204 % surround any changed text. This approach does *not* work if the
205 % change spans more than two lines of output. To handle that, we would
206 % have adopt a much more difficult approach (putting marks into the main
207 % vertical list for the beginning and end of each change).
210 % \vadjust can only be used in horizontal mode.
213 % Append this vertical mode material after the current line in the output.
215 % We want to insert a rule with the height and depth of the current
216 % leading; that is exactly what \strutbox is supposed to record.
219 % \vadjust-items are inserted at the left edge of the type. So
220 % the \llap here moves out into the left-hand margin.
223 % For a thicker or thinner bar, change the `1pt'.
224 \vrule height\baselineskip width1pt
226 % This is the space between the bar and the text.
232 % Sometimes it is convenient to have everything in the transcript file
233 % and nothing on the terminal. We don't just call \tracingall here,
234 % since that produces some useless output on the terminal. We also make
235 % some effort to order the tracing commands to reduce output in the log
236 % file; cf. trace.sty in LaTeX.
238 \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
242 \tracinglostchars2 % 2 gives us more in etex
247 \showboxbreadth\maxdimen \showboxdepth\maxdimen
248 \ifx\eTeXversion\undefined\else % etex gives us more logging
255 \tracingcommands3 % 3 gives us more in etex
256 \errorcontextlines\maxdimen
259 % add check for \lastpenalty to plain's definitions. If the last thing
260 % we did was a \nobreak, we don't want to insert more space.
262 \def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
263 \removelastskip\penalty-50\smallskip\fi\fi}
264 \def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
265 \removelastskip\penalty-100\medskip\fi\fi}
266 \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
267 \removelastskip\penalty-200\bigskip\fi\fi}
269 % For @cropmarks command.
270 % Do @cropmarks to get crop marks.
273 \let\cropmarks = \cropmarkstrue
275 % Dimensions to add cropmarks at corners.
276 % Added by P. A. MacKay, 12 Nov. 1986
278 \newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
279 \newdimen\cornerlong \cornerlong=1pc
280 \newdimen\cornerthick \cornerthick=.3pt
281 \newdimen\topandbottommargin \topandbottommargin=.75in
283 % Main output routine.
285 \output = {\onepageout{\pagecontents\PAGE}}
290 % \onepageout takes a vbox as an argument. Note that \pagecontents
291 % does insertions, but you have to call it yourself.
293 \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
295 \ifodd\pageno \advance\hoffset by \bindingoffset
296 \else \advance\hoffset by -\bindingoffset\fi
298 % Do this outside of the \shipout so @code etc. will be expanded in
299 % the headline as they should be, not taken literally (outputting ''code).
300 \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
301 \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
304 % Have to do this stuff outside the \shipout because we want it to
305 % take effect in \write's, yet the group defined by the \vbox ends
306 % before the \shipout runs.
308 \escapechar = `\\ % use backslash in output files.
309 \indexdummies % don't expand commands in the output.
310 \normalturnoffactive % \ in index entries must not stay \, e.g., if
311 % the page break happens to be in the middle of an example.
313 % Do this early so pdf references go to the beginning of the page.
314 \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
316 \ifcropmarks \vbox to \outervsize\bgroup
318 \vskip-\topandbottommargin
320 \line{\ewtop\hfil\ewtop}%
323 \vbox{\moveleft\cornerthick\nstop}%
325 \vbox{\moveright\cornerthick\nstop}%
328 \vskip\topandbottommargin
330 \hfil % center the page within the outer (page) hsize.
331 \ifodd\pageno\hskip\bindingoffset\fi
337 \ifdim\ht\footlinebox > 0pt
338 % Only leave this space if the footline is nonempty.
339 % (We lessened \vsize for it in \oddfootingxxx.)
340 % The \baselineskip=24pt in plain's \makefootline has no effect.
341 \vskip 2\baselineskip
346 \egroup % end of \vbox\bgroup
347 \hfil\egroup % end of (centering) \line\bgroup
348 \vskip\topandbottommargin plus1fill minus1fill
349 \boxmaxdepth = \cornerthick
352 \vbox{\moveleft\cornerthick\nsbot}%
354 \vbox{\moveright\cornerthick\nsbot}%
357 \line{\ewbot\hfil\ewbot}%
359 \egroup % \vbox from first cropmarks clause
361 }% end of \shipout\vbox
362 }% end of group with \normalturnoffactive
364 \ifnum\outputpenalty>-20000 \else\dosupereject\fi
367 \newinsert\margin \dimen\margin=\maxdimen
369 \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
371 \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
372 % marginal hacks, juha@viisa.uucp (Juha Takala)
373 \ifvoid\margin\else % marginal info is present
374 \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
375 \dimen@=\dp#1 \unvbox#1
376 \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
377 \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
380 % Here are the rules for the cropmarks. Note that they are
381 % offset so that the space between them is truly \outerhsize or \outervsize
382 % (P. A. MacKay, 12 November, 1986)
384 \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
386 {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
387 \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
389 {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
391 % Parse an argument, then pass it to #1. The argument is the rest of
392 % the input line (except we remove a trailing comment). #1 should be a
393 % macro which expects an ordinary undelimited TeX argument.
395 \def\parsearg{\parseargusing{}}
396 \def\parseargusing#1#2{%
402 \parseargline\empty% Insert the \empty token, see \finishparsearg below.
406 \gdef\parseargline#1^^M{%
407 \endgroup % End of the group started in \parsearg.
408 \argremovecomment #1\comment\ArgTerm%
412 % First remove any @comment, then any @c comment.
413 \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
414 \def\argremovec#1\c#2\ArgTerm{\argremovespace#1$ $\ArgTerm}
415 % \argremovec might leave us with trailing space, though; e.g.,
416 % @end itemize @c foo
417 % Note that the argument cannot contain the TeX $, as its catcode is
418 % changed to \other when Texinfo source is read.
419 \def\argremovespace#1 $#2\ArgTerm{\finishparsearg#1$\ArgTerm}
421 % If a _delimited_ argument is enclosed in braces, they get stripped; so
422 % to get _exactly_ the rest of the line, we had to prevent such situation.
423 % We prepended an \empty token at the very beginning and we expand it
424 % just before passing the control to \next.
425 % (But first, we have to spend the remaining $ or two.)
426 \def\finishparsearg#1$#2\ArgTerm{\expandafter\next\expandafter{#1}}
428 % \defparsearg\foo{...}
429 % is roughly equivalent to
430 % \def\foo{\parsearg\Xfoo}
433 % Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
434 % favourite TeX trick. --kasal, 16nov03
437 \expandafter \dodefparsearg \csname\string#1\endcsname #1%
439 \def\dodefparsearg#1#2{%
444 % Several utility definitions with active space:
449 % Make each space character in the input produce a normal interword
450 % space in the output. Don't allow a line break at this space, as this
451 % is used only in environments like @example, where each line of input
452 % should produce a line of output anyway.
454 \gdef\sepspaces{\obeyspaces\let =\tie}
456 % If an index command is used in an @example environment, any spaces
457 % therein should become regular spaces in the raw index file, not the
458 % expansion of \tie (\leavevmode \penalty \@M \ ).
459 \gdef\unsepspaces{\let =\space}
463 \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
466 %% These are used to keep @begin/@end levels from running away
467 %% Call \inENV within environments (after a \begingroup)
468 \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
470 \ifENV\errmessage{Still within an environment; press RETURN to continue}
471 \endgroup\fi} % This is not perfect, but it should reduce lossage
473 % @end foo executes the definition of \Efoo.
476 \expandafter\ifx\csname E#1\endcsname\relax
479 % Everything's ok; the right environment has been started.
480 \csname E#1\endcsname
485 \expandafter\ifx\csname#1\endcsname\relax
486 % There's no \foo, i.e., no ``environment'' foo.
488 \errmessage{Undefined command `@end #1'}%
490 \unmatchedenderror{#1}%
494 % There is an environment #1, but it hasn't been started. Give an error.
496 \def\unmatchedenderror#1{%
498 \errmessage{This `@end #1' doesn't have a matching `@#1'}%
501 % Define the control sequence \E#1 to give an unmatched @end error.
503 \def\defineunmatchedend#1{%
504 \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
507 \newhelp\EMsimple{Press RETURN to continue.}
510 %% Simple single-character @ commands
513 % Kludge this until the fonts are right (grr).
516 % This is turned off because it was never documented
517 % and you can use @w{...} around a quote to suppress ligatures.
518 %% Define @` and @' to be the same as ` and '
519 %% but suppressing ligatures.
523 % Used to generate quoted braces.
524 \def\mylbrace {{\tt\char123}}
525 \def\myrbrace {{\tt\char125}}
529 % Definitions to produce \{ and \} commands for indices,
530 % and @{ and @} for the aux file.
531 \catcode`\{ = \other \catcode`\} = \other
532 \catcode`\[ = 1 \catcode`\] = 2
533 \catcode`\! = 0 \catcode`\\ = \other
536 !gdef!lbraceatcmd[@{]%
537 !gdef!rbraceatcmd[@}]%
540 % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
541 % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
544 \def\ringaccent#1{{\accent23 #1}}
549 % Other special characters: @questiondown @exclamdown
550 % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
551 \def\questiondown{?`}
554 % Dotless i and dotless j, used for accents.
559 \ifx\temp\imacro \ptexi
560 \else\ifx\temp\jmacro \j
561 \else \errmessage{@dotless can be used only with i or j}%
565 % Be sure we're in horizontal mode when doing a tie, since we make space
566 % equivalent to this in @example-like environments. Otherwise, a space
567 % at the beginning of a line will start with \penalty -- and
568 % since \penalty is valid in vertical mode, we'd end up putting the
569 % penalty on the vertical list instead of in the new paragraph.
571 % Avoid using \@M directly, because that causes trouble
572 % if the definition is written into an index file.
573 \global\let\tiepenalty = \@M
574 \gdef\tie{\leavevmode\penalty\tiepenalty\ }
577 % @: forces normal size whitespace following.
578 \def\:{\spacefactor=1000 }
580 % @* forces a line break.
581 \def\*{\hfil\break\hbox{}\ignorespaces}
583 % @/ allows a line break.
586 % @. is an end-of-sentence period.
587 \def\.{.\spacefactor=3000 }
589 % @! is an end-of-sentence bang.
590 \def\!{!\spacefactor=3000 }
592 % @? is an end-of-sentence query.
593 \def\?{?\spacefactor=3000 }
595 % @w prevents a word break. Without the \leavevmode, @w at the
596 % beginning of a paragraph, when TeX is still in vertical mode, would
597 % produce a whole line of output instead of starting the paragraph.
598 \def\w#1{\leavevmode\hbox{#1}}
600 % @group ... @end group forces ... to be all on one page, by enclosing
601 % it in a TeX vbox. We use \vtop instead of \vbox to construct the box
602 % to keep its height that of a normal line. According to the rules for
603 % \topskip (p.114 of the TeXbook), the glue inserted is
604 % max (\topskip - \ht (first item), 0). If that height is large,
605 % therefore, no glue is inserted, and the space between the headline and
606 % the text is small, which looks bad.
608 % Another complication is that the group might be very large. This can
609 % cause the glue on the previous page to be unduly stretched, because it
610 % does not have much material. In this case, it's better to add an
611 % explicit \vfill so that the extra space is at the bottom. The
612 % threshold for doing this is if the group is more than \vfilllimit
613 % percent of a page (\vfilllimit can be changed inside of @tex).
618 \def\group{\begingroup
619 \ifnum\catcode`\^^M=\active \else
620 \errhelp = \groupinvalidhelp
621 \errmessage{@group invalid in context where filling is enabled}%
625 % The \vtop we start below produces a box with normal height and large
626 % depth; thus, TeX puts \baselineskip glue before it, and (when the
627 % next line of text is done) \lineskip glue after it. (See p.82 of
628 % the TeXbook.) Thus, space below is not quite equal to space
629 % above. But it's pretty close.
631 \egroup % End the \vtop.
632 % \dimen0 is the vertical size of the group's box.
633 \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
634 % \dimen2 is how much space is left on the page (more or less).
635 \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
636 % if the group doesn't fit on the current page, and it's a big big
637 % group, force a page break.
638 \ifdim \dimen0 > \dimen2
639 \ifdim \pagetotal < \vfilllimit\pageheight
645 \endgroup % End the \group.
648 \setbox\groupbox = \vtop\bgroup
649 % We have to put a strut on the last line in case the @group is in
650 % the midst of an example, rather than completely enclosing it.
651 % Otherwise, the interline space between the last line of the group
652 % and the first line afterwards is too small. But we can't put the
653 % strut in \Egroup, since there it would be on a line by itself.
654 % Hence this just inserts a strut at the beginning of each line.
655 \everypar = {\strut}%
657 % Since we have a strut on every line, we don't need any of TeX's
658 % normal interline spacing.
661 % OK, but now we have to do something about blank
662 % lines in the input in @example-like environments, which normally
663 % just turn into \lisppar, which will insert no space now that we've
664 % turned off the interline space. Simplest is to make them be an
667 \edef\par{\leavevmode \par}%
669 % Reset ^^M's definition to new definition of \par.
673 % Do @comment since we are called inside an environment such as
674 % @example, where each end-of-line in the input causes an
675 % end-of-line in the output. We don't want the end-of-line after
676 % the `@group' to put extra space in the output. Since @group
677 % should appear on a line by itself (according to the Texinfo
678 % manual), we don't worry about eating any user text.
682 % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
683 % message, so this ends up printing `@group can only ...'.
685 \newhelp\groupinvalidhelp{%
686 group can only be used in environments such as @example,^^J%
687 where each line of input produces a line of output.}
689 % @need space-in-mils
690 % forces a page break if there is not space-in-mils remaining.
692 \newdimen\mil \mil=0.001in
694 % Old definition--didn't work.
695 %\defparsearg\need{\par %
696 %% This method tries to make TeX break the page naturally
697 %% if the depth of the box does not fit.
699 %\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
704 % Ensure vertical mode, so we don't make a big box in the middle of a
708 % If the @need value is less than one line space, it's useless.
710 \dimen2 = \ht\strutbox
711 \advance\dimen2 by \dp\strutbox
712 \ifdim\dimen0 > \dimen2
714 % Do a \strut just to make the height of this box be normal, so the
715 % normal leading is inserted relative to the preceding line.
716 % And a page break here is fine.
717 \vtop to #1\mil{\strut\vfil}%
719 % TeX does not even consider page breaks if a penalty added to the
720 % main vertical list is 10000 or more. But in order to see if the
721 % empty box we just added fits on the page, we must make it consider
722 % page breaks. On the other hand, we don't want to actually break the
723 % page after the empty box. So we use a penalty of 9999.
725 % There is an extremely small chance that TeX will actually break the
726 % page at this \penalty, if there are no other feasible breakpoints in
727 % sight. (If the user is using lots of big @group commands, which
728 % almost-but-not-quite fill up a page, TeX will have a hard time doing
729 % good page breaking, for example.) However, I could not construct an
730 % example where a page broke at this \penalty; if it happens in a real
731 % document, then we can reconsider our strategy.
734 % Back up by the size of the box, whether we did a page break or not.
737 % Do not allow a page break right after this kern.
742 % @br forces paragraph break
746 % @dots{} output an ellipsis using the current font.
747 % We do .5em per period so that it has the same spacing in a typewriter
748 % font as three actual period characters.
753 \hskip 0pt plus 0.25fil minus 0.25fil
755 \hskip 0pt plus 0.5fil minus 0.5fil
759 % @enddots{} is an end-of-sentence ellipsis.
764 \hskip 0pt plus 0.25fil minus 0.25fil
766 \hskip 0pt plus 0.5fil minus 0.5fil
771 % @page forces the start of a new page.
773 \def\page{\par\vfill\supereject}
776 % outputs text on separate line in roman font, starting at standard page margin
778 % This records the amount of indent in the innermost environment.
779 % That's how much \exdent should take out.
780 \newskip\exdentamount
782 % This defn is used inside fill environments such as @defun.
783 \defparsearg\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
785 % This defn is used inside nofill environments such as @example.
786 \defparsearg\nofillexdent{{\advance \leftskip by -\exdentamount
787 \leftline{\hskip\leftskip{\rm#1}}}}
789 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
790 % paragraph. For more general purposes, use the \margin insertion
791 % class. WHICH is `l' or `r'.
793 \newskip\inmarginspacing \inmarginspacing=1cm
794 \def\strutdepth{\dp\strutbox}
796 \def\doinmargin#1#2{\strut\vadjust{%
799 \vtop to \strutdepth{%
800 \baselineskip=\strutdepth
802 % if you have multiple lines of stuff to put here, you'll need to
803 % make the vbox yourself of the appropriate size.
805 \llap{\ignorespaces #2\hskip\inmarginspacing}%
807 \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
812 \def\inleftmargin{\doinmargin l}
813 \def\inrightmargin{\doinmargin r}
815 % @inmargin{TEXT [, RIGHT-TEXT]}
816 % (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
817 % else use TEXT for both).
819 \def\inmargin#1{\parseinmargin #1,,\finish}
820 \def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
821 \setbox0 = \hbox{\ignorespaces #2}%
823 \def\lefttext{#1}% have both texts
826 \def\lefttext{#1}% have only one text
831 \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
833 \def\temp{\inleftmargin\lefttext}%
838 % @include file insert text of that file as input.
840 \def\include{\parseargusing\filenamecatcodes\includezzz}
846 \def\temp{\input #1 }%
851 \def\filenamecatcodes{%
863 \def\pushthisfilestack{%
864 \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
866 \def\pushthisfilestackX{%
867 \expandafter\pushthisfilestackY\thisfile\StackTerm
869 \def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
870 \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
873 \def\popthisfilestack{\errthisfilestackempty}
874 \def\errthisfilestackempty{\errmessage{Internal error:
875 the stack of filenames is empty.}}
880 % outputs that line, centered.
882 \defparsearg\center{%
883 \ifhmode \hfil\break \fi
885 \advance\hsize by -\leftskip
886 \advance\hsize by -\rightskip
887 \line{\hfil \ignorespaces#1\unskip \hfil}%
892 % @sp n outputs n lines of vertical space
894 \defparsearg\sp{\vskip #1\baselineskip}
896 % @comment ...line which is ignored...
897 % @c is the same as @comment
898 % @ignore ... @end ignore is another way to write a comment
900 \def\comment{\begingroup \catcode`\^^M=\other%
901 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
903 {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
907 % @paragraphindent NCHARS
908 % We'll use ems for NCHARS, close enough.
909 % NCHARS can also be the word `asis' or `none'.
910 % We cannot feasibly implement @paragraphindent asis, though.
912 \def\asisword{asis} % no translation, these are keywords
915 \defparsearg\paragraphindent{%
920 \defaultparindent = 0pt
922 \defaultparindent = #1em
925 \parindent = \defaultparindent
928 % @exampleindent NCHARS
929 % We'll use ems for NCHARS like @paragraphindent.
930 % It seems @exampleindent asis isn't necessary, but
931 % I preserve it to make it similar to @paragraphindent.
932 \defparsearg\exampleindent{%
939 \lispnarrowing = #1em
944 % @firstparagraphindent WORD
945 % If WORD is `none', then suppress indentation of the first paragraph
946 % after a section heading. If WORD is `insert', then do indent at such
949 % The paragraph indentation is suppressed or not by calling
950 % \suppressfirstparagraphindent, which the sectioning commands do.
951 % We switch the definition of this back and forth according to WORD.
952 % By default, we suppress indentation.
954 \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
955 \newdimen\currentparindent
957 \def\insertword{insert}
959 \defparsearg\firstparagraphindent{%
962 \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
963 \else\ifx\temp\insertword
964 \let\suppressfirstparagraphindent = \relax
967 \errmessage{Unknown @firstparagraphindent option `\temp'}%
971 % Here is how we actually suppress indentation. Redefine \everypar to
972 % \kern backwards by \parindent, and then reset itself to empty.
974 % We also make \indent itself not actually do anything until the next
977 \gdef\dosuppressfirstparagraphindent{%
979 \restorefirstparagraphindent
983 \restorefirstparagraphindent
986 \global\everypar = {%
988 \restorefirstparagraphindent
992 \gdef\restorefirstparagraphindent{%
993 \global \let \indent = \ptexindent
994 \global \let \noindent = \ptexnoindent
995 \global \everypar = {}%
999 % @asis just yields its argument. Used with @table, for example.
1003 % @math outputs its argument in math mode.
1005 % One complication: _ usually means subscripts, but it could also mean
1006 % an actual _ character, as in @math{@var{some_variable} + 1}. So make
1007 % _ active, and distinguish by seeing if the current family is \slfam,
1008 % which is what @var uses.
1010 \catcode\underChar = \active
1011 \gdef\mathunderscore{%
1012 \catcode\underChar=\active
1013 \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
1016 % Another complication: we want \\ (and @\) to output a \ character.
1017 % FYI, plain.tex uses \\ as a temporary control sequence (why?), but
1018 % this is not advertised and we don't care. Texinfo does not
1019 % otherwise define @\.
1021 % The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
1022 \def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
1027 \let\\ = \mathbackslash
1031 \def\finishmath#1{#1$\Etex}
1033 % Some active characters (such as <) are spaced differently in math.
1034 % We have to reset their definitions in case the @math was an argument
1035 % to a command which sets the catcodes (such as @item or @section).
1038 \catcode`^ = \active
1039 \catcode`< = \active
1040 \catcode`> = \active
1041 \catcode`+ = \active
1050 % @bullet and @minus need the same treatment as @math, just above.
1051 \def\bullet{$\ptexbullet$}
1054 % @refill is a no-op.
1057 % If working on a large document in chapters, it is convenient to
1058 % be able to disable indexing, cross-referencing, and contents, for test runs.
1059 % This is done with @novalidate (before @setfilename).
1061 \newif\iflinks \linkstrue % by default we want the aux files.
1062 \let\novalidate = \linksfalse
1064 % @setfilename is done at the beginning of every texinfo file.
1065 % So open here the files we need to have open while reading the input.
1066 % This makes it possible to make a .fmt file for texinfo.
1070 \fi % \openindices needs to do some work in any case.
1072 \fixbackslash % Turn off hack to swallow `\input texinfo'.
1073 \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
1075 % If texinfo.cnf is present on the system, read it.
1076 % Useful for site-wide @afourpaper, etc.
1077 % Just to be on the safe side, close the input stream before the \input.
1078 \openin 1 texinfo.cnf
1079 \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
1083 \comment % Ignore the actual filename.
1086 % Called from \setfilename.
1098 \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
1102 % adobe `portable' document format
1106 \newcount\filenamelength
1115 \newif\ifpdfmakepagedest
1117 \ifx\pdfoutput\undefined
1119 \let\pdfmkdest = \gobble
1120 \let\pdfurl = \gobble
1121 \let\endlink = \relax
1122 \let\linkcolor = \relax
1123 \let\pdfmakeoutlines = \relax
1128 \pdfcatalog{/PageMode /UseOutlines}%
1129 \def\dopdfimage#1#2#3{%
1130 \def\imagewidth{#2}%
1131 \def\imageheight{#3}%
1132 % without \immediate, pdftex seg faults when the same image is
1133 % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
1134 \ifnum\pdftexversion < 14
1137 \immediate\pdfximage
1139 \ifx\empty\imagewidth\else width \imagewidth \fi
1140 \ifx\empty\imageheight\else height \imageheight \fi
1141 \ifnum\pdftexversion<13
1146 \ifnum\pdftexversion < 14 \else
1147 \pdfrefximage \pdflastximage
1150 % We have to set dummies so commands such as @code in a section title
1153 \normalturnoffactive
1154 \pdfdest name{#1} xyz%
1157 \let\linkcolor = \Blue % was Cyan, but that seems light?
1158 \def\endlink{\Black\pdfendlink}
1159 % Adding outlines to PDF; macros for calculating structure of outlines
1160 % come from Petr Olsak
1161 \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
1162 \else \csname#1\endcsname \fi}
1163 \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
1164 \advance\tempnum by 1
1165 \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
1167 % #1 is the section text. #2 is the pdf expression for the number
1168 % of subentries (or empty, for subsubsections). #3 is the node
1169 % text, which might be empty if this toc entry had no
1170 % corresponding node. #4 is the page number.
1172 \def\dopdfoutline#1#2#3#4{%
1173 % Generate a link to the node text if that exists; else, use the
1174 % page number. We could generate a destination for the section
1175 % text in the case where a section has no node, but it doesn't
1176 % seem worthwhile, since most documents are normally structured.
1177 \def\pdfoutlinedest{#3}%
1178 \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
1180 \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
1183 \def\pdfmakeoutlines{%
1184 \openin 1 \jobname.toc
1185 \ifeof 1\else\begingroup
1187 % Thanh's hack / proper braces in bookmarks
1188 \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
1189 \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
1191 % Read toc silently, to get counts of subentries for \pdfoutline.
1192 \def\numchapentry##1##2##3##4{\def\thischapnum{##2}}%
1193 \def\numsecentry##1##2##3##4{%
1194 \def\thissecnum{##2}%
1195 \advancenumber{chap\thischapnum}}%
1196 \def\numsubsecentry##1##2##3##4{%
1197 \def\thissubsecnum{##2}%
1198 \advancenumber{sec\thissecnum}}%
1199 \def\numsubsubsecentry##1##2##3##4{\advancenumber{subsec\thissubsecnum}}%
1201 % use \def rather than \let here because we redefine \chapentry et
1202 % al. a second time, below.
1203 \def\appentry{\numchapentry}%
1204 \def\appsecentry{\numsecentry}%
1205 \def\appsubsecentry{\numsubsecentry}%
1206 \def\appsubsubsecentry{\numsubsubsecentry}%
1207 \def\unnchapentry{\numchapentry}%
1208 \def\unnsecentry{\numsecentry}%
1209 \def\unnsubsecentry{\numsubsecentry}%
1210 \def\unnsubsubsecentry{\numsubsubsecentry}%
1213 % Read toc second time, this time actually producing the outlines.
1214 % The `-' means take the \expnumber as the absolute number of
1215 % subentries, which we calculated on our first read of the .toc above.
1217 % We use the node names as the destinations.
1218 \def\numchapentry##1##2##3##4{%
1219 \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
1220 \def\numsecentry##1##2##3##4{%
1221 \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
1222 \def\numsubsecentry##1##2##3##4{%
1223 \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
1224 \def\numsubsubsecentry##1##2##3##4{% count is always zero
1225 \dopdfoutline{##1}{}{##3}{##4}}%
1227 % Make special characters normal for writing to the pdf file.
1234 \def\makelinks #1,{%
1235 \def\params{#1}\def\E{END}%
1237 \let\nextmakelinks=\relax
1239 \let\nextmakelinks=\makelinks
1240 \ifnum\lnkcount>0,\fi
1242 \startlink attr{/Border [0 0 0]}
1243 goto name{\pdfmkpgn{\the\pgn}}%
1245 \advance\lnkcount by 1%
1250 \def\picknum#1{\expandafter\pn#1}
1261 \def\ppn#1{\pgn=#1\gobble}
1262 \def\ppnn{\pgn=\first}
1263 \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
1264 \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1265 \def\skipspaces#1{\def\PP{#1}\def\D{|}%
1266 \ifx\PP\D\let\nextsp\relax
1267 \else\let\nextsp\skipspaces
1268 \ifx\p\space\else\addtokens{\filename}{\PP}%
1269 \advance\filenamelength by 1
1273 \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
1274 \ifnum\pdftexversion < 14
1275 \let \startlink \pdfannotlink
1277 \let \startlink \pdfstartlink
1281 \normalturnoffactive\def\@{@}%
1282 \makevalueexpandable
1284 \startlink attr{/Border [0 0 0]}%
1285 user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
1288 \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
1289 \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1290 \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
1291 \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
1293 \expandafter\poptoks\the\toksA|ENDTOKS|
1295 \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
1296 \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
1297 \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
1299 \ifnum0=\countA\else\makelink\fi
1300 \ifx\first.\let\next=\done\else
1302 \addtokens{\toksB}{\the\toksD}
1303 \ifx\first,\addtokens{\toksB}{\space}\fi
1305 \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
1307 \def\makelink{\addtokens{\toksB}%
1308 {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
1310 \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
1311 \linkcolor #1\endlink}
1312 \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
1313 \fi % \ifx\pdfoutput
1317 % Font-change commands.
1319 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
1320 % So we set up a \sf analogous to plain's \rm, etc.
1322 \def\sf{\fam=\sffam \tensf}
1323 \let\li = \sf % Sometimes we call it \li, not \sf.
1325 % We don't need math for this one.
1329 \newdimen\textleading \textleading = 13.2pt
1331 % Set the baselineskip to #1, and the lineskip and strut size
1332 % correspondingly. There is no deep meaning behind these magic numbers
1333 % used as factors; they just match (closely enough) what Knuth defined.
1335 \def\lineskipfactor{.08333}
1336 \def\strutheightpercent{.70833}
1337 \def\strutdepthpercent {.29167}
1340 \normalbaselineskip = #1\relax
1341 \normallineskip = \lineskipfactor\normalbaselineskip
1343 \setbox\strutbox =\hbox{%
1344 \vrule width0pt height\strutheightpercent\baselineskip
1345 depth \strutdepthpercent \baselineskip
1349 % Set the font macro #1 to the font named #2, adding on the
1350 % specified font prefix (normally `cm').
1351 % #3 is the font's design size, #4 is a scale factor
1352 \def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1354 % Use cm as the default font prefix.
1355 % To specify the font prefix, you must define \fontprefix
1356 % before you read in texinfo.tex.
1357 \ifx\fontprefix\undefined
1360 % Support font families that don't use the same naming scheme as CM.
1362 \def\rmbshape{bx} %where the normal face is bold
1367 \def\ttslshape{sltt}
1377 \newcount\mainmagstep
1379 % not really supported.
1380 \mainmagstep=\magstep1
1381 \setfont\textrm\rmshape{12}{1000}
1382 \setfont\texttt\ttshape{12}{1000}
1384 \mainmagstep=\magstephalf
1385 \setfont\textrm\rmshape{10}{\mainmagstep}
1386 \setfont\texttt\ttshape{10}{\mainmagstep}
1388 \setfont\textbf\bfshape{10}{\mainmagstep}
1389 \setfont\textit\itshape{10}{\mainmagstep}
1390 \setfont\textsl\slshape{10}{\mainmagstep}
1391 \setfont\textsf\sfshape{10}{\mainmagstep}
1392 \setfont\textsc\scshape{10}{\mainmagstep}
1393 \setfont\textttsl\ttslshape{10}{\mainmagstep}
1394 \font\texti=cmmi10 scaled \mainmagstep
1395 \font\textsy=cmsy10 scaled \mainmagstep
1397 % A few fonts for @defun names and args.
1398 \setfont\defbf\bfshape{10}{\magstep1}
1399 \setfont\deftt\ttshape{10}{\magstep1}
1400 \setfont\defttsl\ttslshape{10}{\magstep1}
1401 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
1403 % Fonts for indices, footnotes, small examples (9pt).
1404 \setfont\smallrm\rmshape{9}{1000}
1405 \setfont\smalltt\ttshape{9}{1000}
1406 \setfont\smallbf\bfshape{10}{900}
1407 \setfont\smallit\itshape{9}{1000}
1408 \setfont\smallsl\slshape{9}{1000}
1409 \setfont\smallsf\sfshape{9}{1000}
1410 \setfont\smallsc\scshape{10}{900}
1411 \setfont\smallttsl\ttslshape{10}{900}
1415 % Fonts for small examples (8pt).
1416 \setfont\smallerrm\rmshape{8}{1000}
1417 \setfont\smallertt\ttshape{8}{1000}
1418 \setfont\smallerbf\bfshape{10}{800}
1419 \setfont\smallerit\itshape{8}{1000}
1420 \setfont\smallersl\slshape{8}{1000}
1421 \setfont\smallersf\sfshape{8}{1000}
1422 \setfont\smallersc\scshape{10}{800}
1423 \setfont\smallerttsl\ttslshape{10}{800}
1424 \font\smalleri=cmmi8
1425 \font\smallersy=cmsy8
1427 % Fonts for title page:
1428 \setfont\titlerm\rmbshape{12}{\magstep3}
1429 \setfont\titleit\itbshape{10}{\magstep4}
1430 \setfont\titlesl\slbshape{10}{\magstep4}
1431 \setfont\titlett\ttbshape{12}{\magstep3}
1432 \setfont\titlettsl\ttslshape{10}{\magstep4}
1433 \setfont\titlesf\sfbshape{17}{\magstep1}
1434 \let\titlebf=\titlerm
1435 \setfont\titlesc\scbshape{10}{\magstep4}
1436 \font\titlei=cmmi12 scaled \magstep3
1437 \font\titlesy=cmsy10 scaled \magstep4
1438 \def\authorrm{\secrm}
1439 \def\authortt{\sectt}
1441 % Chapter (and unnumbered) fonts (17.28pt).
1442 \setfont\chaprm\rmbshape{12}{\magstep2}
1443 \setfont\chapit\itbshape{10}{\magstep3}
1444 \setfont\chapsl\slbshape{10}{\magstep3}
1445 \setfont\chaptt\ttbshape{12}{\magstep2}
1446 \setfont\chapttsl\ttslshape{10}{\magstep3}
1447 \setfont\chapsf\sfbshape{17}{1000}
1449 \setfont\chapsc\scbshape{10}{\magstep3}
1450 \font\chapi=cmmi12 scaled \magstep2
1451 \font\chapsy=cmsy10 scaled \magstep3
1453 % Section fonts (14.4pt).
1454 \setfont\secrm\rmbshape{12}{\magstep1}
1455 \setfont\secit\itbshape{10}{\magstep2}
1456 \setfont\secsl\slbshape{10}{\magstep2}
1457 \setfont\sectt\ttbshape{12}{\magstep1}
1458 \setfont\secttsl\ttslshape{10}{\magstep2}
1459 \setfont\secsf\sfbshape{12}{\magstep1}
1461 \setfont\secsc\scbshape{10}{\magstep2}
1462 \font\seci=cmmi12 scaled \magstep1
1463 \font\secsy=cmsy10 scaled \magstep2
1465 % Subsection fonts (13.15pt).
1466 \setfont\ssecrm\rmbshape{12}{\magstephalf}
1467 \setfont\ssecit\itbshape{10}{1315}
1468 \setfont\ssecsl\slbshape{10}{1315}
1469 \setfont\ssectt\ttbshape{12}{\magstephalf}
1470 \setfont\ssecttsl\ttslshape{10}{1315}
1471 \setfont\ssecsf\sfbshape{12}{\magstephalf}
1473 \setfont\ssecsc\scbshape{10}{\magstep1}
1474 \font\sseci=cmmi12 scaled \magstephalf
1475 \font\ssecsy=cmsy10 scaled 1315
1476 % The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1477 % but that is not a standard magnification.
1479 % In order for the font changes to affect most math symbols and letters,
1480 % we have to define the \textfont of the standard families. Since
1481 % texinfo doesn't allow for producing subscripts and superscripts except
1482 % in the main text, we don't bother to reset \scriptfont and
1483 % \scriptscriptfont (which would also require loading a lot more fonts).
1485 \def\resetmathfonts{%
1486 \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
1487 \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
1488 \textfont\ttfam=\tentt \textfont\sffam=\tensf
1491 % The font-changing commands redefine the meanings of \tenSTYLE, instead
1492 % of just \STYLE. We do this so that font changes will continue to work
1493 % in math mode, where it is the current \fam that is relevant in most
1494 % cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1495 % \tenbf}, for example. By redefining \tenbf, we obviate the need to
1496 % redefine \bf itself.
1498 \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1499 \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1500 \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1501 \resetmathfonts \setleading{\textleading}}
1503 \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
1504 \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
1505 \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
1506 \let\tenttsl=\titlettsl
1507 \resetmathfonts \setleading{25pt}}
1508 \def\titlefont#1{{\titlefonts\rm #1}}
1510 \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1511 \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1512 \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1513 \resetmathfonts \setleading{19pt}}
1515 \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1516 \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1517 \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1518 \resetmathfonts \setleading{16pt}}
1520 \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1521 \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1522 \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1523 \resetmathfonts \setleading{15pt}}
1524 \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1526 \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
1527 \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
1528 \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
1529 \let\tenttsl=\smallttsl
1530 \resetmathfonts \setleading{10.5pt}}
1532 \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
1533 \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
1534 \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
1535 \let\tenttsl=\smallerttsl
1536 \resetmathfonts \setleading{9.5pt}}
1538 % Set the fonts to use with the @small... environments.
1539 \let\smallexamplefonts = \smallfonts
1541 % About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
1542 % can fit this many characters:
1543 % 8.5x11=86 smallbook=72 a4=90 a5=69
1544 % If we use \smallerfonts (8pt), then we can fit this many characters:
1545 % 8.5x11=90+ smallbook=80 a4=90+ a5=77
1546 % For me, subjectively, the few extra characters that fit aren't worth
1547 % the additional smallness of 8pt. So I'm making the default 9pt.
1549 % By the way, for comparison, here's what fits with @example (10pt):
1550 % 8.5x11=71 smallbook=60 a4=75 a5=58
1552 % I wish we used A4 paper on this side of the Atlantic.
1557 % Set up the default fonts, so we can use them for creating boxes.
1561 % Define these so they can be easily changed for other fonts.
1562 \def\angleleft{$\langle$}
1563 \def\angleright{$\rangle$}
1565 % Count depth in font-changes, for error checks
1566 \newcount\fontdepth \fontdepth=0
1568 % Fonts for short table of contents.
1569 \setfont\shortcontrm\rmshape{12}{1000}
1570 \setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12
1571 \setfont\shortcontsl\slshape{12}{1000}
1572 \setfont\shortconttt\ttshape{12}{1000}
1574 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1575 %% serif) and @ii for TeX italic
1577 % \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1578 % unless the following character is such as not to need one.
1579 \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
1580 \ptexslash\fi\fi\fi}
1581 \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
1582 \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
1584 % like \smartslanted except unconditionally uses \ttsl.
1585 % @var is set to this for defun arguments.
1586 \def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx}
1588 % like \smartslanted except unconditionally use \sl. We never want
1589 % ttsl for book titles, do we?
1590 \def\cite#1{{\sl #1}\futurelet\next\smartitalicx}
1593 \let\var=\smartslanted
1594 \let\dfn=\smartslanted
1595 \let\emph=\smartitalic
1600 % We can't just use \exhyphenpenalty, because that only has effect at
1601 % the end of a paragraph. Restore normal hyphenation at the end of the
1602 % group within which \nohyphenation is presumably called.
1604 \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1605 \def\restorehyphenation{\hyphenchar\font = `- }
1607 % Set sfcode to normal for the chars that usually have another value.
1608 % Can't use plain's \frenchspacing because it uses the `\x notation, and
1609 % sometimes \x has an active definition that messes things up.
1612 \def\frenchspacing{%
1613 \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
1614 \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
1619 {\tt \rawbackslash \frenchspacing #1}%
1623 \def\samp#1{`\tclose{#1}'\null}
1624 \setfont\keyrm\rmshape{8}{1000}
1626 \def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
1627 \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
1628 \vbox{\hrule\kern-0.4pt
1629 \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
1631 \kern-.06em\raise0.4pt\hbox{\angleright}}}}
1632 % The old definition, with no lozenge:
1633 %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1634 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
1636 % @file, @option are the same as @samp.
1640 % @code is a modification of @t,
1641 % which makes spaces the same size as normal in the surrounding text.
1644 % Change normal interword space to be same as for the current font.
1645 \spaceskip = \fontdimen2\font
1647 % Switch to typewriter.
1650 % But `\ ' produces the large typewriter interword space.
1651 \def\ {{\spaceskip = 0pt{} }}%
1653 % Turn off hyphenation.
1663 % We *must* turn on hyphenation at `-' and `_' in \code.
1664 % Otherwise, it is too hard to avoid overfull hboxes
1665 % in the Emacs manual, the Library manual, etc.
1667 % Unfortunately, TeX uses one parameter (\hyphenchar) to control
1668 % both hyphenation at - and hyphenation within words.
1669 % We must therefore turn them both off (\tclose does that)
1670 % and arrange explicitly to hyphenate at a dash.
1676 \global\def\code{\begingroup
1677 \catcode`\-=\active \let-\codedash
1678 \catcode`\_=\active \let_\codeunder
1684 \def\codedash{-\discretionary{}{}{}}
1686 % this is all so @math{@code{var_name}+1} can work. In math mode, _
1687 % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
1688 % will therefore expand the active definition of _, which is us
1689 % (inside @code that is), therefore an endless loop.
1691 \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
1692 \else\normalunderscore \fi
1693 \discretionary{}{}{}}%
1696 \def\codex #1{\tclose{#1}\endgroup}
1698 % @kbd is like @code, except that if the argument is just one @key command,
1699 % then @kbd has no effect.
1701 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
1702 % `example' (@kbd uses ttsl only inside of @example and friends),
1703 % or `code' (@kbd uses normal tty font always).
1704 \defparsearg\kbdinputstyle{%
1706 \ifx\arg\worddistinct
1707 \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
1708 \else\ifx\arg\wordexample
1709 \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
1710 \else\ifx\arg\wordcode
1711 \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
1713 \errhelp = \EMsimple
1714 \errmessage{Unknown @kbdinputstyle option `\arg'}%
1717 \def\worddistinct{distinct}
1718 \def\wordexample{example}
1721 % Default is `distinct.'
1722 \kbdinputstyle distinct
1725 \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1726 \ifx\one\xkey\ifx\threex\three \key{#2}%
1727 \else{\tclose{\kbdfont\look}}\fi
1728 \else{\tclose{\kbdfont\look}}\fi}
1730 % For @url, @env, @command quotes seem unnecessary, so use \code.
1735 % @uref (abbreviation for `urlref') takes an optional (comma-separated)
1736 % second argument specifying the text to display and an optional third
1737 % arg as text to display instead of (rather than in addition to) the url
1738 % itself. First (mandatory) arg is the url. Perhaps eventually put in
1739 % a hypertex \special here.
1741 \def\uref#1{\douref #1,,,\finish}
1742 \def\douref#1,#2,#3,#4\finish{\begingroup
1745 \setbox0 = \hbox{\ignorespaces #3}%
1747 \unhbox0 % third arg given, show only that
1749 \setbox0 = \hbox{\ignorespaces #2}%
1752 \unhbox0 % PDF: 2nd arg given, show only it
1754 \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
1757 \code{#1}% only url given, so show it
1763 % rms does not like angle brackets --karl, 17may97.
1764 % So now @email is just like @uref, unless we are pdf.
1766 %\def\email#1{\angleleft{\tt #1}\angleright}
1768 \def\email#1{\doemail#1,,\finish}
1769 \def\doemail#1,#2,#3\finish{\begingroup
1772 \setbox0 = \hbox{\ignorespaces #2}%
1773 \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
1780 % Check if we are currently using a typewriter font. Since all the
1781 % Computer Modern typewriter fonts have zero interword stretch (and
1782 % shrink), and it is reasonable to expect all typewriter fonts to have
1783 % this property, we can check that font parameter.
1785 \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1787 % Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1788 % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
1790 \def\dmn#1{\thinspace #1}
1792 \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1794 % @l was never documented to mean ``switch to the Lisp font'',
1795 % and it is not used as such in any manual I can find. We need it for
1796 % Polish suppressed-l. --karl, 22sep96.
1797 %\def\l#1{{\li #1}\null}
1799 % Explicit font changes: @r, @sc, undocumented @ii.
1800 \def\r#1{{\rm #1}} % roman font
1801 \def\sc#1{{\smallcaps#1}} % smallcaps font
1802 \def\ii#1{{\it #1}} % italic font
1804 % @acronym downcases the argument and prints in smallcaps.
1805 % It would be nicer to go one point size down.
1806 \def\acronym#1{{\smallcaps \lowercase{#1}}}
1808 % @pounds{} is a sterling sign.
1809 \def\pounds{{\it\$}}
1811 % @registeredsymbol - R in a circle. For now, only works in text size;
1812 % we'd have to redo the font mechanism to change the \scriptstyle and
1813 % \scriptscriptstyle font sizes to make it look right in headings.
1814 % Adapted from the plain.tex definition of \copyright.
1816 \def\registeredsymbol{%
1817 $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
1822 \message{page headings,}
1824 \newskip\titlepagetopglue \titlepagetopglue = 1.5in
1825 \newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1827 % First the title page. Must do @settitle before @titlepage.
1829 \newif\iffinishedtitlepage
1831 % Do an implicit @contents or @shortcontents after @end titlepage if the
1832 % user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
1834 \newif\ifsetcontentsaftertitlepage
1835 \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
1836 \newif\ifsetshortcontentsaftertitlepage
1837 \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
1839 \defparsearg\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1840 \endgroup\page\hbox{}\page}
1843 \begingroup \parindent=0pt \textfonts
1844 % Leave some space at the very top of the page.
1845 \vglue\titlepagetopglue
1846 % No rule at page bottom unless we print one at the top with @title.
1847 \finishedtitlepagetrue
1849 % Most title ``pages'' are actually two pages long, with space
1850 % at the top of the second. We don't want the ragged left on the second.
1851 \let\oldpage = \page
1853 \iffinishedtitlepage\else
1856 \let\page = \oldpage
1863 \iffinishedtitlepage\else
1866 % It is important to do the page break before ending the group,
1867 % because the headline and footline are only empty inside the group.
1868 % If we use the new definition of \page, we always get a blank page
1869 % after the title page, which we certainly don't want.
1873 % Need this before the \...aftertitlepage checks so that if they are
1874 % in effect the toc pages will come out with page numbers.
1877 % If they want short, they certainly want long too.
1878 \ifsetshortcontentsaftertitlepage
1881 \global\let\shortcontents = \relax
1882 \global\let\contents = \relax
1885 \ifsetcontentsaftertitlepage
1887 \global\let\contents = \relax
1888 \global\let\shortcontents = \relax
1892 \def\finishtitlepage{%
1893 \vskip4pt \hrule height 2pt width \hsize
1894 \vskip\titlepagebottomglue
1895 \finishedtitlepagetrue
1898 %%% Macros to be used within @titlepage:
1900 \let\subtitlerm=\tenrm
1901 \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
1903 \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
1906 \defparsearg\title{\leftline{\titlefonts\rm #1}
1907 % print a rule at the page bottom also.
1908 \finishedtitlepagefalse
1909 \vskip4pt \hrule height 4pt width \hsize \vskip4pt}
1911 \defparsearg\subtitle{{\subtitlefont \rightline{#1}}}
1913 % @author should come last, but may come many times.
1914 \defparsearg\author{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1915 {\authorfont \leftline{#1}}}
1918 %%% Set up page headings and footings.
1920 \let\thispage=\folio
1922 \newtoks\evenheadline % headline on even pages
1923 \newtoks\oddheadline % headline on odd pages
1924 \newtoks\evenfootline % footline on even pages
1925 \newtoks\oddfootline % footline on odd pages
1927 % Now make TeX use those variables
1928 \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1929 \else \the\evenheadline \fi}}
1930 \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1931 \else \the\evenfootline \fi}\HEADINGShook}
1932 \let\HEADINGShook=\relax
1934 % Commands to set those variables.
1935 % For example, this is what @headings on does
1936 % @evenheading @thistitle|@thispage|@thischapter
1937 % @oddheading @thischapter|@thispage|@thistitle
1938 % @evenfooting @thisfile||
1939 % @oddfooting ||@thisfile
1942 \def\evenheading{\parsearg\evenheadingxxx}
1943 \def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
1944 \def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
1945 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1947 \def\oddheading{\parsearg\oddheadingxxx}
1948 \def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
1949 \def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
1950 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1952 \defparsearg\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
1954 \def\evenfooting{\parsearg\evenfootingxxx}
1955 \def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
1956 \def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
1957 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1959 \def\oddfooting{\parsearg\oddfootingxxx}
1960 \def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
1961 \def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
1962 \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1964 % Leave some space for the footline. Hopefully ok to assume
1965 % @evenfooting will not be used by itself.
1966 \global\advance\pageheight by -\baselineskip
1967 \global\advance\vsize by -\baselineskip
1970 \defparsearg\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
1973 % @headings double turns headings on for double-sided printing.
1974 % @headings single turns headings on for single-sided printing.
1975 % @headings off turns them off.
1976 % @headings on same as @headings double, retained for compatibility.
1977 % @headings after turns on double-sided headings after this page.
1978 % @headings doubleafter turns on double-sided headings after this page.
1979 % @headings singleafter turns on single-sided headings after this page.
1980 % By default, they are off at the start of a document,
1981 % and turned `on' after @end titlepage.
1983 \def\headings #1 {\csname HEADINGS#1\endcsname}
1986 \global\evenheadline={\hfil} \global\evenfootline={\hfil}
1987 \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1989 % When we turn headings on, set the page number to 1.
1990 % For double-sided printing, put current file name in lower left corner,
1991 % chapter name on inside top of right hand pages, document
1992 % title on inside top of left hand pages, and page numbers on outside top
1993 % edge of all pages.
1994 \def\HEADINGSdouble{%
1996 \global\evenfootline={\hfil}
1997 \global\oddfootline={\hfil}
1998 \global\evenheadline={\line{\folio\hfil\thistitle}}
1999 \global\oddheadline={\line{\thischapter\hfil\folio}}
2000 \global\let\contentsalignmacro = \chapoddpage
2002 \let\contentsalignmacro = \chappager
2004 % For single-sided printing, chapter title goes across top left of page,
2005 % page number on top right.
2006 \def\HEADINGSsingle{%
2008 \global\evenfootline={\hfil}
2009 \global\oddfootline={\hfil}
2010 \global\evenheadline={\line{\thischapter\hfil\folio}}
2011 \global\oddheadline={\line{\thischapter\hfil\folio}}
2012 \global\let\contentsalignmacro = \chappager
2014 \def\HEADINGSon{\HEADINGSdouble}
2016 \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
2017 \let\HEADINGSdoubleafter=\HEADINGSafter
2018 \def\HEADINGSdoublex{%
2019 \global\evenfootline={\hfil}
2020 \global\oddfootline={\hfil}
2021 \global\evenheadline={\line{\folio\hfil\thistitle}}
2022 \global\oddheadline={\line{\thischapter\hfil\folio}}
2023 \global\let\contentsalignmacro = \chapoddpage
2026 \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
2027 \def\HEADINGSsinglex{%
2028 \global\evenfootline={\hfil}
2029 \global\oddfootline={\hfil}
2030 \global\evenheadline={\line{\thischapter\hfil\folio}}
2031 \global\oddheadline={\line{\thischapter\hfil\folio}}
2032 \global\let\contentsalignmacro = \chappager
2035 % Subroutines used in generating headings
2036 % This produces Day Month Year style of output.
2037 % Only define if not already defined, in case a txi-??.tex file has set
2038 % up a different format (e.g., txi-cs.tex does this).
2039 \ifx\today\undefined
2043 \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
2044 \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
2045 \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
2050 % @settitle line... specifies the title of the document, for headings.
2051 % It generates no output of its own.
2052 \def\thistitle{\putwordNoTitle}
2053 \def\settitle{\parsearg{\gdef\thistitle}}
2057 % Tables -- @table, @ftable, @vtable, @item(x).
2059 % default indentation of table text
2060 \newdimen\tableindent \tableindent=.8in
2061 % default indentation of @itemize and @enumerate text
2062 \newdimen\itemindent \itemindent=.3in
2063 % margin between end of table item and start of table text.
2064 \newdimen\itemmargin \itemmargin=.1in
2066 % used internally for \itemindent minus \itemmargin
2069 % Note @table, @ftable, and @vtable define @item, @itemx, etc., with
2071 % They also define \itemindex
2072 % to index the item name in whatever manner is desired (perhaps none).
2074 \newif\ifitemxneedsnegativevskip
2076 \def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
2078 \def\internalBitem{\smallbreak \parsearg\itemzzz}
2079 \def\internalBitemx{\itemxpar \parsearg\itemzzz}
2081 \def\itemzzz #1{\begingroup %
2082 \advance\hsize by -\rightskip
2083 \advance\hsize by -\tableindent
2084 \setbox0=\hbox{\itemindicate{#1}}%
2086 \nobreak % This prevents a break before @itemx.
2088 % If the item text does not fit in the space we have, put it on a line
2089 % by itself, and do not allow a page break either before or after that
2090 % line. We do not start a paragraph here because then if the next
2091 % command is, e.g., @kindex, the whatsit would get put into the
2092 % horizontal list on a line by itself, resulting in extra blank space.
2093 \ifdim \wd0>\itemmax
2095 % Make this a paragraph so we get the \parskip glue and wrapping,
2096 % but leave it ragged-right.
2098 \advance\leftskip by-\tableindent
2099 \advance\hsize by\tableindent
2100 \advance\rightskip by0pt plus1fil
2101 \leavevmode\unhbox0\par
2104 % We're going to be starting a paragraph, but we don't want the
2105 % \parskip glue -- logically it's part of the @item we just started.
2106 \nobreak \vskip-\parskip
2108 % Stop a page break at the \parskip glue coming up. (Unfortunately
2109 % we can't prevent a possible page break at the following
2110 % \baselineskip glue.) However, if what follows is an environment
2111 % such as @example, there will be no \parskip glue; then
2112 % the negative vskip we just would cause the example and the item to
2113 % crash together. So we use this bizarre value of 10001 as a signal
2114 % to \aboveenvbreak to insert \parskip glue after all.
2115 % (Possibly there are other commands that could be followed by
2116 % @example which need the same treatment, but not section titles; or
2117 % maybe section titles are the only special case and they should be
2121 \itemxneedsnegativevskipfalse
2123 % The item text fits into the space. Start a paragraph, so that the
2124 % following text (if any) will end up on the same line.
2126 % Do this with kerns and \unhbox so that if there is a footnote in
2127 % the item text, it can migrate to the main vertical list and
2128 % eventually be printed.
2129 \nobreak\kern-\tableindent
2130 \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
2132 \nobreak\kern\dimen0
2134 \itemxneedsnegativevskiptrue
2138 \def\item{\errmessage{@item while not in a list environment}}
2139 \def\itemx{\errmessage{@itemx while not in a list environment}}
2141 % @table, @ftable, @vtable.
2144 \let\itemindex\gobble
2149 \def\itemindex ##1{\doind {fn}{\code{##1}}}%
2154 \def\itemindex ##1{\doind {vr}{\code{##1}}}%
2158 \def\itemindicate{#1}%
2163 \makevalueexpandable
2164 \edef\temp{\noexpand\tablez #1\space\space\space}%
2168 \def\tablez #1 #2 #3 #4\endtablez{%
2170 \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
2171 \ifnum 0#2>0 \tableindent=#2\mil \fi
2172 \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
2173 \itemmax=\tableindent
2174 \advance \itemmax by -\itemmargin
2175 \advance \leftskip by \tableindent
2176 \exdentamount=\tableindent
2178 \parskip = \smallskipamount
2179 \ifdim \parskip=0pt \parskip=2pt \fi
2180 \let\item = \internalBitem
2181 \let\itemx = \internalBitemx
2183 \def\Etable{\endgraf\afterenvbreak\endgroup}
2187 % This is the counter used by @enumerate, which is really @itemize
2191 \defparsearg\itemize{%
2192 \begingroup % ended by the @end itemize
2193 \itemizey {#1}{\Eitemize}
2198 \itemmax=\itemindent
2199 \advance\itemmax by -\itemmargin
2200 \advance\leftskip by \itemindent
2201 \exdentamount=\itemindent
2203 \parskip=\smallskipamount
2204 \ifdim\parskip=0pt \parskip=2pt \fi
2205 \def#2{\endgraf\afterenvbreak\endgroup}%
2206 \def\itemcontents{#1}%
2207 % @itemize with no arg is equivalent to @itemize @bullet.
2208 \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
2209 \let\item=\itemizeitem
2212 % \splitoff TOKENS\endmark defines \first to be the first token in
2213 % TOKENS, and \rest to be the remainder.
2215 \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
2217 % Allow an optional argument of an uppercase letter, lowercase letter,
2218 % or number, to specify the first label in the enumerated list. No
2219 % argument is the same as `1'.
2221 \defparsearg\enumerate{\enumeratey #1 \endenumeratey}
2222 \def\enumeratey #1 #2\endenumeratey{%
2223 \begingroup % ended by the @end enumerate
2225 % If we were given no argument, pretend we were given `1'.
2227 \ifx\thearg\empty \def\thearg{1}\fi
2229 % Detect if the argument is a single token. If so, it might be a
2230 % letter. Otherwise, the only valid thing it can be is a number.
2231 % (We will always have one token, because of the test we just made.
2232 % This is a good thing, since \splitoff doesn't work given nothing at
2233 % all -- the first parameter is undelimited.)
2234 \expandafter\splitoff\thearg\endmark
2236 % Only one token in the argument. It could still be anything.
2237 % A ``lowercase letter'' is one whose \lccode is nonzero.
2238 % An ``uppercase letter'' is one whose \lccode is both nonzero, and
2239 % not equal to itself.
2240 % Otherwise, we assume it's a number.
2242 % We need the \relax at the end of the \ifnum lines to stop TeX from
2243 % continuing to look for a <number>.
2245 \ifnum\lccode\expandafter`\thearg=0\relax
2246 \numericenumerate % a number (we hope)
2249 \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
2250 \lowercaseenumerate % lowercase letter
2252 \uppercaseenumerate % uppercase letter
2256 % Multiple tokens in the argument. We hope it's a number.
2261 % An @enumerate whose labels are integers. The starting integer is
2264 \def\numericenumerate{%
2266 \startenumeration{\the\itemno}%
2269 % The starting (lowercase) letter is in \thearg.
2270 \def\lowercaseenumerate{%
2271 \itemno = \expandafter`\thearg
2273 % Be sure we're not beyond the end of the alphabet.
2275 \errmessage{No more lowercase letters in @enumerate; get a bigger
2282 % The starting (uppercase) letter is in \thearg.
2283 \def\uppercaseenumerate{%
2284 \itemno = \expandafter`\thearg
2286 % Be sure we're not beyond the end of the alphabet.
2288 \errmessage{No more uppercase letters in @enumerate; get a bigger
2295 % Call itemizey, adding a period to the first argument and supplying the
2296 % common last two arguments. Also subtract one from the initial value in
2297 % \itemno, since @item increments \itemno.
2299 \def\startenumeration#1{%
2300 \advance\itemno by -1
2301 \itemizey{#1.}\Eenumerate\flushcr
2304 % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
2307 \def\alphaenumerate{\enumerate{a}}
2308 \def\capsenumerate{\enumerate{A}}
2309 \def\Ealphaenumerate{\Eenumerate}
2310 \def\Ecapsenumerate{\Eenumerate}
2312 % Definition of @item while inside @itemize.
2315 \advance\itemno by 1
2316 {\let\par=\endgraf \smallbreak}%
2317 \ifhmode \errmessage{In hmode at itemizeitem}\fi
2318 {\parskip=0in \hskip 0pt
2319 \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
2320 \vadjust{\penalty 1200}}%
2323 % @multitable macros
2324 % Amy Hendrickson, 8/18/94, 3/6/96
2326 % @multitable ... @end multitable will make as many columns as desired.
2327 % Contents of each column will wrap at width given in preamble. Width
2328 % can be specified either with sample text given in a template line,
2329 % or in percent of \hsize, the current width of text on page.
2331 % Table can continue over pages but will only break between lines.
2335 % Either define widths of columns in terms of percent of \hsize:
2336 % @multitable @columnfractions .25 .3 .45
2339 % Numbers following @columnfractions are the percent of the total
2340 % current hsize to be used for each column. You may use as many
2341 % columns as desired.
2344 % Or use a template:
2345 % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2347 % using the widest term desired in each column.
2349 % Each new table line starts with @item, each subsequent new column
2350 % starts with @tab. Empty columns may be produced by supplying @tab's
2351 % with nothing between them for as many times as empty columns are needed,
2352 % ie, @tab@tab@tab will produce two empty columns.
2354 % @item, @tab do not need to be on their own lines, but it will not hurt
2357 % Sample multitable:
2359 % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2360 % @item first col stuff @tab second col stuff @tab third col
2367 % @item first col stuff @tab second col stuff
2368 % @tab Many paragraphs of text may be used in any column.
2370 % They will wrap at the width determined by the template.
2371 % @item@tab@tab This will be in third column.
2374 % Default dimensions may be reset by user.
2375 % @multitableparskip is vertical space between paragraphs in table.
2376 % @multitableparindent is paragraph indent in table.
2377 % @multitablecolmargin is horizontal space to be left between columns.
2378 % @multitablelinespace is space to leave between table items, baseline
2380 % 0pt means it depends on current normal line spacing.
2382 \newskip\multitableparskip
2383 \newskip\multitableparindent
2384 \newdimen\multitablecolspace
2385 \newskip\multitablelinespace
2386 \multitableparskip=0pt
2387 \multitableparindent=6pt
2388 \multitablecolspace=12pt
2389 \multitablelinespace=0pt
2391 % Macros used to set up halign preamble:
2393 \let\endsetuptable\relax
2394 \def\xendsetuptable{\endsetuptable}
2395 \let\columnfractions\relax
2396 \def\xcolumnfractions{\columnfractions}
2399 % #1 is the part of the @columnfraction before the decimal point, which
2400 % is presumably either 0 or the empty string (but we don't check, we
2401 % just throw it away). #2 is the decimal part, which we use as the
2402 % percent of \hsize for this column.
2403 \def\pickupwholefraction#1.#2 {%
2404 \global\advance\colcount by 1
2405 \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
2412 \ifx\firstarg\xendsetuptable
2415 \ifx\firstarg\xcolumnfractions
2416 \global\setpercenttrue
2419 \let\go\pickupwholefraction
2421 \global\advance\colcount by 1
2422 \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
2423 % separator; typically that is always in the input, anyway.
2424 \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
2427 \ifx\go\pickupwholefraction
2428 % Put the argument back for the \pickupwholefraction call, so
2429 % we'll always have a period there to be parsed.
2430 \def\go{\pickupwholefraction#1}%
2432 \let\go = \setuptable
2438 % multitable-only commands.
2439 \def\headitem{\errmessage{@headitem outside of @multitable}}
2440 \def\tab{\errmessage{@tab outside of @multitable}}
2442 % @multitable ... @end multitable definitions:
2444 \newtoks\everytab % insert after every tab.
2446 \defparsearg\multitable{\bgroup
2450 % @headitem starts a heading row, which we typeset in bold.
2451 % Assignments have to be global since we are inside the implicit group
2452 % of an alignment entry.
2453 \def\headitem{\crcrwithinserts \global\everytab={\bf}\the\everytab}%
2455 % @item within a multitable starts a normal row, get rid of any bold.
2456 \def\item{\crcrwithinserts \global\everytab={}}%
2458 % A \tab used to include \hskip1sp. But then the space in a template
2459 % line is not enough. That is bad. So let's go back to just & until
2460 % we encounter the problem it was intended to solve again. --karl,
2461 % nathan@acm.org, 20apr99.
2462 \def\tab{&\the\everytab}%
2466 \setmultitablespacing
2467 \parskip=\multitableparskip
2468 \parindent=\multitableparindent
2473 \global\setpercentfalse
2478 % To parse everything between @multitable and @item:
2479 \setuptable#1 \endsetuptable
2481 % \everycr will reset column counter, \colcount, at the end of
2482 % each line. Every column entry will cause \colcount to advance by one.
2483 % The table preamble
2484 % looks at the current \colcount to find the correct column width.
2487 % \filbreak%% keeps underfull box messages off when table breaks over pages.
2488 % Maybe so, but it also creates really weird page breaks when the table
2489 % breaks over pages. Wouldn't \vfil be better? Wait until the problem
2490 % manifests itself, so it can be fixed for real --karl.
2491 \global\colcount=0\relax}}%
2493 % This preamble sets up a generic column definition, which will
2494 % be used as many times as user calls for columns.
2495 % \vtop will set a single line and will also let text wrap and
2496 % continue for many paragraphs if desired.
2497 \halign\bgroup&\global\advance\colcount by 1\relax
2498 \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
2500 % In order to keep entries from bumping into each other
2501 % we will add a \leftskip of \multitablecolspace to all columns after
2504 % If a template has been used, we will add \multitablecolspace
2505 % to the width of each template entry.
2507 % If the user has set preamble in terms of percent of \hsize we will
2508 % use that dimension as the width of the column, and the \leftskip
2509 % will keep entries from bumping into each other. Table will start at
2510 % left margin and final column will justify at right margin.
2512 % Make sure we don't inherit \rightskip from the outer environment.
2515 % The first column will be indented with the surrounding text.
2516 \advance\hsize by\leftskip
2519 % If user has not set preamble in terms of percent of \hsize
2520 % we will advance \hsize by \multitablecolspace.
2521 \advance\hsize by \multitablecolspace
2523 % In either case we will make \leftskip=\multitablecolspace:
2524 \leftskip=\multitablecolspace
2526 % Ignoring space at the beginning and end avoids an occasional spurious
2527 % blank line, when TeX decides to break the line at the space before the
2528 % box from the multistrut, so the strut ends up on a line by itself.
2530 % @multitable @columnfractions .11 .89
2532 % @tab Legal holiday which is valid in major parts of the whole country.
2533 % Is automatically provided with highlighting sequences respectively marking
2535 \noindent\ignorespaces##\unskip\multistrut}\cr
2537 \def\crcrwithinserts{\crcr\noalign{\checkinserts}}
2539 \def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2540 % If so, do nothing. If not, give it an appropriate dimension based on
2541 % current baselineskip.
2542 \ifdim\multitablelinespace=0pt
2543 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
2544 \global\advance\multitablelinespace by-\ht0
2545 %% strut to put in table in case some entry doesn't have descenders,
2546 %% to keep lines equally spaced
2547 \let\multistrut = \strut
2549 %% FIXME: what is \box0 supposed to be?
2550 \gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2552 %% Test to see if parskip is larger than space between lines of
2553 %% table. If not, do nothing.
2554 %% If so, set to same dimension as multitablelinespace.
2555 \ifdim\multitableparskip>\multitablelinespace
2556 \global\multitableparskip=\multitablelinespace
2557 \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2558 %% than skip between lines in the table.
2560 \ifdim\multitableparskip=0pt
2561 \global\multitableparskip=\multitablelinespace
2562 \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2563 %% than skip between lines in the table.
2567 \message{conditionals,}
2568 % Prevent errors for section commands.
2569 % Used in @ignore and in failing conditionals.
2570 \def\ignoresections{%
2571 \let\appendix=\relax
2572 \let\appendixsec=\relax
2573 \let\appendixsection=\relax
2574 \let\appendixsubsec=\relax
2575 \let\appendixsubsection=\relax
2576 \let\appendixsubsubsec=\relax
2577 \let\appendixsubsubsection=\relax
2580 \let\centerchap=\relax
2582 \let\contents=\relax
2584 \let\smallbook=\relax
2586 \let\subsection=\relax
2587 \let\subsubsec=\relax
2588 \let\subsubsection=\relax
2589 \let\titlepage=\relax
2591 \let\unnumbered=\relax
2592 \let\unnumberedsec=\relax
2593 \let\unnumberedsection=\relax
2594 \let\unnumberedsubsec=\relax
2595 \let\unnumberedsubsection=\relax
2596 \let\unnumberedsubsubsec=\relax
2597 \let\unnumberedsubsubsection=\relax
2600 % Ignore @ignore, @ifhtml, @ifinfo, and the like.
2602 \def\direntry{\doignore{direntry}}
2603 \def\documentdescriptionword{documentdescription}
2604 \def\documentdescription{\doignore{documentdescription}}
2605 \def\docbook{\doignore{docbook}}
2606 \def\html{\doignore{html}}
2607 \def\ifdocbook{\doignore{ifdocbook}}
2608 \def\ifhtml{\doignore{ifhtml}}
2609 \def\ifinfo{\doignore{ifinfo}}
2610 \def\ifnottex{\doignore{ifnottex}}
2611 \def\ifplaintext{\doignore{ifplaintext}}
2612 \def\ifxml{\doignore{ifxml}}
2613 \def\ignore{\doignore{ignore}}
2614 \def\menu{\doignore{menu}}
2615 \def\xml{\doignore{xml}}
2617 % @dircategory CATEGORY -- specify a category of the dir file
2618 % which this file should belong to. Ignore this in TeX.
2619 \let\dircategory = \comment
2621 % Ignore text until a line `@end #1', keeping track of nested conditionals.
2623 % A count to remember the depth of nesting.
2624 \newcount\doignorecount
2626 \def\doignore#1{\begingroup
2627 % Scan in ``verbatim'' mode:
2628 \catcode`\@ = \other
2629 \catcode`\{ = \other
2630 \catcode`\} = \other
2632 % Make sure that spaces turn into tokens that match what \doignoretext wants.
2633 \catcode\spaceChar = 10
2635 % Count number of #1's that we've seen.
2638 % Swallow text until we reach the matching `@end #1'.
2642 { \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
2645 \gdef\dodoignore#1{%
2646 % #1 contains the string `ifinfo'.
2648 % Define a command to find the next `@end #1', which must be on a line
2650 \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}%
2651 % And this command to find another #1 command, at the beginning of a
2652 % line. (Otherwise, we would consider a line `@c @ifset', for
2653 % example, to count as an @ifset for nesting.)
2654 \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
2656 % And now expand that command.
2662 \def\doignoreyyy#1{%
2664 \ifx\temp\empty % Nothing found.
2665 \let\next\doignoretextzzz
2666 \else % Found a nested condition, ...
2667 \advance\doignorecount by 1
2668 \let\next\doignoretextyyy % ..., look for another.
2669 % If we're here, #1 ends with ^^M\ifinfo (for example).
2671 \next #1% the token \_STOP_ is present just after this macro.
2674 % We have to swallow the remaining "\_STOP_".
2676 \def\doignoretextzzz#1{%
2677 \ifnum\doignorecount = 0 % We have just found the outermost @end.
2678 \let\next\enddoignore
2679 \else % Still inside a nested condition.
2680 \advance\doignorecount by -1
2681 \let\next\doignoretext % Look for the next @end.
2686 % Finish off ignored text.
2687 \def\enddoignore{\endgroup\ignorespaces}
2690 % @set VAR sets the variable VAR to an empty value.
2691 % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
2693 % Since we want to separate VAR from REST-OF-LINE (which might be
2694 % empty), we can't just use \parsearg; we have to insert a space of our
2695 % own to delimit the rest of the line, and then take it out again if we
2697 % We rely on the fact that \parsearg sets \catcode`\ =10.
2699 \def\set{\parseargusing{\catcode`\-=\other \catcode`\_=\other}\setxxx}
2700 \def\setxxx#1{\setyyy#1 \endsetyyy}
2701 \def\setyyy#1 #2\endsetyyy{%
2703 \edef\next{\gdef\makecsname{SET#1}}%
2710 % Remove the trailing space \setxxx inserted.
2711 \def\setzzz#1 \endsetzzz{\next{#1}}
2713 % @clear VAR clears (i.e., unsets) the variable VAR.
2715 \defparsearg\clear{\global\expandafter\let\csname SET#1\endcsname=\relax}
2717 % @value{foo} gets the text saved in variable foo.
2718 \def\value{\begingroup\makevalueexpandable\valuexxx}
2719 \def\valuexxx#1{\expandablevalue{#1}\endgroup}
2721 \catcode`\- = \active \catcode`\_ = \active
2723 \gdef\makevalueexpandable{%
2724 \let\value = \expandablevalue
2725 % We don't want these characters active, ...
2726 \catcode`\-=\other \catcode`\_=\other
2727 % ..., but we might end up with active ones in the argument if
2728 % we're called from @code, as @code{@value{foo-bar_}}, though.
2729 % So \let them to their normal equivalents.
2730 \let-\realdash \let_\normalunderscore
2734 % We have this subroutine so that we can handle at least some @value's
2735 % properly in indexes (we call \makevalueexpandable in \indexdummies).
2736 % The command has to be fully expandable (if the variable is set), since
2737 % the result winds up in the index file. This means that if the
2738 % variable's value contains other Texinfo commands, it's almost certain
2739 % it will fail (although perhaps we could fix that with sufficient work
2740 % to do a one-level expansion on the result, instead of complete).
2742 \def\expandablevalue#1{%
2743 \expandafter\ifx\csname SET#1\endcsname\relax
2744 {[No value for ``#1'']}%
2745 \message{Variable `#1', used in @value, is not set.}%
2747 \csname SET#1\endcsname
2751 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
2754 \defparsearg\ifset{%
2755 \expandafter\ifx\csname SET#1\endcsname\relax
2756 \let\next=\ifsetfail
2758 \let\next=\ifsetsucceed
2762 \def\ifsetsucceed{\conditionalsucceed{ifset}}
2763 \def\ifsetfail{\doignore{ifset}}
2764 \defineunmatchedend{ifset}
2766 % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
2767 % defined with @set, or has been undefined with @clear.
2769 \defparsearg\ifclear{%
2770 \expandafter\ifx\csname SET#1\endcsname\relax
2771 \let\next=\ifclearsucceed
2773 \let\next=\ifclearfail
2777 \def\ifclearsucceed{\conditionalsucceed{ifclear}}
2778 \def\ifclearfail{\doignore{ifclear}}
2779 \defineunmatchedend{ifclear}
2781 % @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
2782 % read the text following, through the first @end iftex (etc.). Make
2783 % `@end iftex' (etc.) valid only after an @iftex.
2785 \def\iftex{\conditionalsucceed{iftex}}
2786 \def\ifnothtml{\conditionalsucceed{ifnothtml}}
2787 \def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
2788 \def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
2789 \defineunmatchedend{iftex}
2790 \defineunmatchedend{ifnothtml}
2791 \defineunmatchedend{ifnotinfo}
2792 \defineunmatchedend{ifnotplaintext}
2794 % True conditional. Since \set globally defines its variables, we can
2795 % just start and end a group (to keep the @end definition undefined at
2798 \def\conditionalsucceed#1{\begingroup
2799 \expandafter\def\csname E#1\endcsname{\endgroup}%
2802 % @defininfoenclose.
2803 \let\definfoenclose=\comment
2807 % Index generation facilities
2809 % Define \newwrite to be identical to plain tex's \newwrite
2810 % except not \outer, so it can be used within \newindex.
2812 \gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2814 % \newindex {foo} defines an index named foo.
2815 % It automatically defines \fooindex such that
2816 % \fooindex ...rest of line... puts an entry in the index foo.
2817 % It also defines \fooindfile to be the number of the output channel for
2818 % the file that accumulates this index. The file's extension is foo.
2819 % The name of an index should be no more than 2 characters long
2820 % for the sake of vms.
2824 \expandafter\newwrite \csname#1indfile\endcsname
2825 \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2827 \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
2828 \noexpand\doindex{#1}}
2831 % @defindex foo == \newindex{foo}
2833 \def\defindex{\parsearg\newindex}
2835 % Define @defcodeindex, like @defindex except put all entries in @code.
2837 \def\defcodeindex{\parsearg\newcodeindex}
2839 \def\newcodeindex#1{%
2841 \expandafter\newwrite \csname#1indfile\endcsname
2842 \openout \csname#1indfile\endcsname \jobname.#1
2844 \expandafter\xdef\csname#1index\endcsname{%
2845 \noexpand\docodeindex{#1}}%
2849 % @synindex foo bar makes index foo feed into index bar.
2850 % Do this instead of @defindex foo if you don't want it as a separate index.
2852 % @syncodeindex foo bar similar, but put all entries made for index foo
2855 \def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
2856 \def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
2858 % #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
2859 % #3 the target index (bar).
2860 \def\dosynindex#1#2#3{%
2861 % Only do \closeout if we haven't already done it, else we'll end up
2862 % closing the target index.
2863 \expandafter \ifx\csname donesynindex#2\endcsname \undefined
2864 % The \closeout helps reduce unnecessary open files; the limit on the
2865 % Acorn RISC OS is a mere 16 files.
2866 \expandafter\closeout\csname#2indfile\endcsname
2867 \expandafter\let\csname\donesynindex#2\endcsname = 1
2869 % redefine \fooindfile:
2870 \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
2871 \expandafter\let\csname#2indfile\endcsname=\temp
2872 % redefine \fooindex:
2873 \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
2876 % Define \doindex, the driver for all \fooindex macros.
2877 % Argument #1 is generated by the calling \fooindex macro,
2878 % and it is "foo", the name of the index.
2880 % \doindex just uses \parsearg; it calls \doind for the actual work.
2881 % This is because \doind is more useful to call from other macros.
2883 % There is also \dosubind {index}{topic}{subtopic}
2884 % which makes an entry in a two-level index such as the operation index.
2886 \def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2887 \def\singleindexer #1{\doind{\indexname}{#1}}
2889 % like the previous two, but they put @code around the argument.
2890 \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2891 \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2893 % Take care of Texinfo commands that can appear in an index entry.
2894 % Since there are some commands we want to expand, and others we don't,
2895 % we have to laboriously prevent expansion for those that we don't.
2898 \def\@{@}% change to @@ when we switch to @ as escape char in index files.
2899 \def\ {\realbackslash\space }%
2900 % Need these in case \tex is in effect and \{ is a \delimiter again.
2901 % But can't use \lbracecmd and \rbracecmd because texindex assumes
2902 % braces and backslashes are used only as delimiters.
2906 % \definedummyword defines \#1 as \realbackslash #1\space, thus
2907 % effectively preventing its expansion. This is used only for control
2908 % words, not control letters, because the \space would be incorrect
2909 % for control characters, but is needed to separate the control word
2910 % from whatever follows.
2912 % For control letters, we have \definedummyletter, which omits the
2915 % These can be used both for control words that take an argument and
2916 % those that do not. If it is followed by {arg} in the input, then
2917 % that will dutifully get written to the index (or wherever).
2919 \def\definedummyword##1{%
2920 \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
2922 \def\definedummyletter##1{%
2923 \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
2926 % Do the redefinitions.
2930 % For the aux file, @ is the escape character. So we want to redefine
2931 % everything using @ instead of \realbackslash. When everything uses
2932 % @, this will be simpler.
2937 \let\{ = \lbraceatcmd
2938 \let\} = \rbraceatcmd
2940 % (See comments in \indexdummies.)
2941 \def\definedummyword##1{%
2942 \expandafter\def\csname ##1\endcsname{@##1\space}%
2944 \def\definedummyletter##1{%
2945 \expandafter\def\csname ##1\endcsname{@##1}%
2948 % Do the redefinitions.
2952 % Called from \indexdummies and \atdummies. \definedummyword and
2953 % \definedummyletter must be defined first.
2955 \def\commondummies{%
2957 \normalturnoffactive
2959 % Control letters and accents.
2960 \definedummyletter{_}%
2961 \definedummyletter{,}%
2962 \definedummyletter{"}%
2963 \definedummyletter{`}%
2964 \definedummyletter{'}%
2965 \definedummyletter{^}%
2966 \definedummyletter{~}%
2967 \definedummyletter{=}%
2968 \definedummyword{u}%
2969 \definedummyword{v}%
2970 \definedummyword{H}%
2971 \definedummyword{dotaccent}%
2972 \definedummyword{ringaccent}%
2973 \definedummyword{tieaccent}%
2974 \definedummyword{ubaraccent}%
2975 \definedummyword{udotaccent}%
2976 \definedummyword{dotless}%
2978 % Other non-English letters.
2979 \definedummyword{AA}%
2980 \definedummyword{AE}%
2981 \definedummyword{L}%
2982 \definedummyword{OE}%
2983 \definedummyword{O}%
2984 \definedummyword{aa}%
2985 \definedummyword{ae}%
2986 \definedummyword{l}%
2987 \definedummyword{oe}%
2988 \definedummyword{o}%
2989 \definedummyword{ss}%
2991 % Although these internal commands shouldn't show up, sometimes they do.
2992 \definedummyword{bf}%
2993 \definedummyword{gtr}%
2994 \definedummyword{hat}%
2995 \definedummyword{less}%
2996 \definedummyword{sf}%
2997 \definedummyword{sl}%
2998 \definedummyword{tclose}%
2999 \definedummyword{tt}%
3001 % Texinfo font commands.
3002 \definedummyword{b}%
3003 \definedummyword{i}%
3004 \definedummyword{r}%
3005 \definedummyword{sc}%
3006 \definedummyword{t}%
3008 \definedummyword{TeX}%
3009 \definedummyword{acronym}%
3010 \definedummyword{cite}%
3011 \definedummyword{code}%
3012 \definedummyword{command}%
3013 \definedummyword{dfn}%
3014 \definedummyword{dots}%
3015 \definedummyword{emph}%
3016 \definedummyword{env}%
3017 \definedummyword{file}%
3018 \definedummyword{kbd}%
3019 \definedummyword{key}%
3020 \definedummyword{math}%
3021 \definedummyword{option}%
3022 \definedummyword{samp}%
3023 \definedummyword{strong}%
3024 \definedummyword{uref}%
3025 \definedummyword{url}%
3026 \definedummyword{var}%
3027 \definedummyword{verb}%
3028 \definedummyword{w}%
3030 % Assorted special characters.
3031 \definedummyword{bullet}%
3032 \definedummyword{copyright}%
3033 \definedummyword{registeredsymbol}%
3034 \definedummyword{dots}%
3035 \definedummyword{enddots}%
3036 \definedummyword{equiv}%
3037 \definedummyword{error}%
3038 \definedummyword{expansion}%
3039 \definedummyword{minus}%
3040 \definedummyword{pounds}%
3041 \definedummyword{point}%
3042 \definedummyword{print}%
3043 \definedummyword{result}%
3045 % Handle some cases of @value -- where it does not contain any
3046 % (non-fully-expandable) commands.
3047 \makevalueexpandable
3049 % Normal spaces, not active ones.
3052 % No macro expansion.
3057 % \indexnofonts is used when outputting the strings to sort the index
3058 % by, and when constructing control sequence names. It eliminates all
3059 % control sequences and just writes whatever the best ASCII sort string
3060 % would be for a given command (usually its argument).
3062 \def\indexdummytex{TeX}
3063 \def\indexdummydots{...}
3068 % how to handle braces?
3069 \def\_{\normalunderscore}%
3081 \let\dotaccent=\asis
3082 \let\ringaccent=\asis
3083 \let\tieaccent=\asis
3084 \let\ubaraccent=\asis
3085 \let\udotaccent=\asis
3088 % Other non-English letters.
3101 \def\questiondown{?}%
3103 % Don't no-op \tt, since it isn't a user-level command
3104 % and is used in the definitions of the active chars like <, >, |, etc.
3105 % Likewise with the other plain tex font commands.
3108 % Texinfo font commands.
3115 \let\TeX=\indexdummytex
3121 \let\dots=\indexdummydots
3138 \let\indexbackslash=0 %overridden during \printindex.
3139 \let\SETmarginindex=\relax % put index entries in margin (undocumented)?
3141 % Most index entries go through here, but \dosubind is the general case.
3142 % #1 is the index name, #2 is the entry text.
3143 \def\doind#1#2{\dosubind{#1}{#2}{}}
3145 % Workhorse for all \fooindexes.
3146 % #1 is name of index, #2 is stuff to put there, #3 is subentry --
3147 % empty if called from \doind, as we usually are (the main exception
3148 % is with most defuns, which call us directly).
3150 \def\dosubind#1#2#3{%
3153 % Store the main index entry text (including the third arg).
3155 % If third arg is present, precede it with a space.
3157 \ifx\thirdarg\empty \else
3158 \toks0 = \expandafter{\the\toks0 \space #3}%
3161 \edef\writeto{\csname#1indfile\endcsname}%
3172 % Write the entry in \toks0 to the index file:
3174 \def\dosubindwrite{%
3175 % Put the index entry in the margin if desired.
3176 \ifx\SETmarginindex\relax\else
3177 \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
3180 % Remember, we are within a group.
3181 \indexdummies % Must do this here, since \bf, etc expand at this stage
3183 \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
3184 % so it will be output as is; and it will print as backslash.
3186 % Process the index entry with all font commands turned off, to
3187 % get the string to sort by.
3189 \edef\temp{\the\toks0}% need full expansion
3190 \xdef\indexsorttmp{\temp}%
3193 % Set up the complete index entry, with both the sort key and
3194 % the original text, including any font commands. We write
3195 % three arguments to \entry to the .?? file (four in the
3196 % subentry case), texindex reduces to two when writing the .??s
3200 \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
3205 % Take care of unwanted page breaks:
3207 % If a skip is the last thing on the list now, preserve it
3208 % by backing up by \lastskip, doing the \write, then inserting
3209 % the skip again. Otherwise, the whatsit generated by the
3210 % \write will make \lastskip zero. The result is that sequences
3215 % will have extra space inserted, because the \medbreak in the
3216 % start of the @defun won't see the skip inserted by the @end of
3217 % the previous defun.
3219 % But don't do any of this if we're not in vertical mode. We
3220 % don't want to do a \vskip and prematurely end a paragraph.
3222 % Avoid page breaks due to these extra skips, too.
3224 % But wait, there is a catch there:
3225 % We'll have to check whether \lastskip is zero skip. \ifdim is not
3226 % sufficient for this purpose, as it ignores stretch and shrink parts
3227 % of the skip. The only way seems to be to check the textual
3228 % representation of the skip.
3230 % The following is almost like \def\zeroskipmacro{0.0pt} except that
3231 % the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
3233 \edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
3237 \def\dosubindsanitize{%
3238 % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
3240 \edef\lastskipmacro{\the\lastskip}%
3241 \count255 = \lastpenalty
3243 % If \lastskip is nonzero, that means the last item was a
3244 % skip. And since a skip is discardable, that means this
3245 % -\skip0 glue we're inserting is preceded by a
3246 % non-discardable item, therefore it is not a potential
3247 % breakpoint, therefore no \nobreak needed.
3248 \ifx\lastskipmacro\zeroskipmacro
3255 \ifx\lastskipmacro\zeroskipmacro
3256 % if \lastskip was zero, perhaps the last item was a
3257 % penalty, and perhaps it was >=10000, e.g., a \nobreak.
3258 % In that case, we want to re-insert the penalty; since we
3259 % just inserted a non-discardable item, any following glue
3260 % (such as a \parskip) would be a breakpoint. For example:
3261 % @deffn deffn-whatever
3262 % @vindex index-whatever
3264 % would allow a break between the index-whatever whatsit
3265 % and the "Description." paragraph.
3266 \ifnum\count255>9999 \nobreak \fi
3268 % On the other hand, if we had a nonzero \lastskip,
3269 % this make-up glue would be preceded by a non-discardable item
3270 % (the whatsit from the \write), so we must insert a \nobreak.
3271 \nobreak\vskip\skip0
3275 % The index entry written in the file actually looks like
3276 % \entry {sortstring}{page}{topic}
3278 % \entry {sortstring}{page}{topic}{subtopic}
3279 % The texindex program reads in these files and writes files
3280 % containing these kinds of lines:
3282 % before the first topic whose initial is c
3283 % \entry {topic}{pagelist}
3284 % for a topic that is used without subtopics
3286 % for the beginning of a topic that is used with subtopics
3287 % \secondary {subtopic}{pagelist}
3288 % for each subtopic.
3290 % Define the user-accessible indexing commands
3291 % @findex, @vindex, @kindex, @cindex.
3293 \def\findex {\fnindex}
3294 \def\kindex {\kyindex}
3295 \def\cindex {\cpindex}
3296 \def\vindex {\vrindex}
3297 \def\tindex {\tpindex}
3298 \def\pindex {\pgindex}
3300 \def\cindexsub {\begingroup\obeylines\cindexsub}
3302 \gdef\cindexsub "#1" #2^^M{\endgroup %
3303 \dosubind{cp}{#2}{#1}}}
3305 % Define the macros used in formatting output of the sorted index material.
3307 % @printindex causes a particular index (the ??s file) to get printed.
3308 % It does not print any chapter heading (usually an @unnumbered).
3310 \defparsearg\printindex{\begingroup
3311 \dobreak \chapheadingskip{10000}%
3315 \everypar = {}% don't want the \kern\-parindent from indentation suppression.
3317 % See if the index file exists and is nonempty.
3318 % Change catcode of @ here so that if the index file contains
3320 % as its first line, TeX doesn't complain about mismatched braces
3321 % (because it thinks @} is a control sequence).
3323 \openin 1 \jobname.#1s
3325 % \enddoublecolumns gets confused if there is no text in the index,
3326 % and it loses the chapter title and the aux file entries for the
3327 % index. The easiest way to prevent this problem is to make sure
3328 % there is some text.
3329 \putwordIndexNonexistent
3332 % If the index file exists but is empty, then \openin leaves \ifeof
3333 % false. We have to make TeX try to read something from the file, so
3334 % it can discover if there is anything in it.
3337 \putwordIndexIsEmpty
3339 % Index files are almost Texinfo source, but we use \ as the escape
3340 % character. It would be better to use @, but that's too big a change
3341 % to make right now.
3342 \def\indexbackslash{\rawbackslashxx}%
3353 % These macros are used by the sorted index file itself.
3354 % Change them to control the appearance of the index.
3357 % Some minor font changes for the special characters.
3358 \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
3360 % Remove any glue we may have, we'll be inserting our own.
3363 % We like breaks before the index initials, so insert a bonus.
3366 % Typeset the initial. Making this add up to a whole number of
3367 % baselineskips increases the chance of the dots lining up from column
3368 % to column. It still won't often be perfect, because of the stretch
3369 % we need before each entry, but it's better.
3371 % No shrink because it confuses \balancecolumns.
3372 \vskip 1.67\baselineskip plus .5\baselineskip
3373 \leftline{\secbf #1}%
3374 \vskip .33\baselineskip plus .1\baselineskip
3376 % Do our best not to break after the initial.
3380 % \entry typesets a paragraph consisting of the text (#1), dot leaders, and
3381 % then page number (#2) flushed to the right margin. It is used for index
3382 % and table of contents entries. The paragraph is indented by \leftskip.
3384 % A straigtforward implementation would start like this:
3385 % \def\entry#1#2{...
3386 % But this frozes the catcodes in the argument, and can cause problems to
3387 % @code, which set's active ``-''. This problem was fixed by a kludge---
3388 % ``-'' was active throughout whole index, but this isn't what we really
3390 % The right solution is to prevent \entry from swallowing the whole text.
3395 % Start a new paragraph if necessary, so our assignments below can't
3396 % affect previous text.
3399 % Do not fill out the last line with white space.
3402 % No extra space above this paragraph.
3405 % Do not prefer a separate line ending with a hyphen to fewer lines.
3406 \finalhyphendemerits = 0
3408 % \hangindent is only relevant when the entry text and page number
3409 % don't both fit on one line. In that case, bob suggests starting the
3410 % dots pretty far over on the line. Unfortunately, a large
3411 % indentation looks wrong when the entry text itself is broken across
3412 % lines. So we use a small indentation and put up with long leaders.
3414 % \hangafter is reset to 1 (which is the value we want) at the start
3415 % of each paragraph, so we need not do anything with that.
3418 % When the entry text needs to be broken, just fill out the first line
3420 \rightskip = 0pt plus1fil
3422 % A bit of stretch before each entry for the benefit of balancing
3426 % Swallow the left brace of the text (first parameter):
3427 \afterassignment\doentry
3431 \bgroup % Instead of the swallowed brace.
3433 \aftergroup\finishentry
3434 % And now comes the text of the entry.
3436 \def\finishentry#1{%
3437 % #1 is the page number.
3439 % The following is kludged to not output a line of dots in the index if
3440 % there are no page numbers. The next person who breaks this will be
3441 % cursed by a Unix daemon.
3444 \edef\tempc{\tempa}%
3445 \edef\tempd{\tempb}%
3450 % If we must, put the page number on a line of its own, and fill out
3451 % this line with blank space. (The \hfil is overwhelmed with the
3452 % fill leaders glue in \indexdotfill if the page number does fit.)
3454 \null\nobreak\indexdotfill % Have leaders before the page number.
3456 % The `\ ' here is removed by the implicit \unskip that TeX does as
3457 % part of (the primitive) \par. Without it, a spurious underfull
3460 \pdfgettoks#1.\ \the\toksA
3469 % Like \dotfill except takes at least 1 em.
3470 \def\indexdotfill{\cleaders
3471 \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
3473 \def\primary #1{\line{#1\hfil}}
3475 \newskip\secondaryindent \secondaryindent=0.5cm
3476 \def\secondary#1#2{{%
3481 \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
3483 \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3490 % Define two-column mode, which we use to typeset indexes.
3491 % Adapted from the TeXbook, page 416, which is to say,
3492 % the manmac.tex format used to print the TeXbook itself.
3496 \newdimen\doublecolumnhsize
3498 \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
3499 % Grab any single-column material above us.
3502 % Here is a possibility not foreseen in manmac: if we accumulate a
3503 % whole lot of material, we might end up calling this \output
3504 % routine twice in a row (see the doublecol-lose test, which is
3505 % essentially a couple of indexes with @setchapternewpage off). In
3506 % that case we just ship out what is in \partialpage with the normal
3507 % output routine. Generally, \partialpage will be empty when this
3508 % runs and this will be a no-op. See the indexspread.tex test case.
3509 \ifvoid\partialpage \else
3510 \onepageout{\pagecontents\partialpage}%
3513 \global\setbox\partialpage = \vbox{%
3514 % Unvbox the main output page.
3516 \kern-\topskip \kern\baselineskip
3519 \eject % run that output routine to set \partialpage
3521 % Use the double-column output routine for subsequent pages.
3522 \output = {\doublecolumnout}%
3524 % Change the page size parameters. We could do this once outside this
3525 % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
3526 % format, but then we repeat the same computation. Repeating a couple
3527 % of assignments once per index is clearly meaningless for the
3528 % execution time, so we may as well do it in one place.
3530 % First we halve the line length, less a little for the gutter between
3531 % the columns. We compute the gutter based on the line length, so it
3532 % changes automatically with the paper format. The magic constant
3533 % below is chosen so that the gutter has the same value (well, +-<1pt)
3534 % as it did when we hard-coded it.
3536 % We put the result in a separate register, \doublecolumhsize, so we
3537 % can restore it in \pagesofar, after \hsize itself has (potentially)
3540 \doublecolumnhsize = \hsize
3541 \advance\doublecolumnhsize by -.04154\hsize
3542 \divide\doublecolumnhsize by 2
3543 \hsize = \doublecolumnhsize
3545 % Double the \vsize as well. (We don't need a separate register here,
3546 % since nobody clobbers \vsize.)
3550 % The double-column output routine for all double-column pages except
3553 \def\doublecolumnout{%
3554 \splittopskip=\topskip \splitmaxdepth=\maxdepth
3555 % Get the available space for the double columns -- the normal
3556 % (undoubled) page height minus any material left over from the
3560 \advance\dimen@ by -\ht\partialpage
3562 % box0 will be the left-hand column, box2 the right.
3563 \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
3564 \onepageout\pagesofar
3566 \penalty\outputpenalty
3569 % Re-output the contents of the output page -- any previous material,
3570 % followed by the two boxes we just split, in box0 and box2.
3574 \hsize = \doublecolumnhsize
3575 \wd0=\hsize \wd2=\hsize
3576 \hbox to\pagewidth{\box0\hfil\box2}%
3579 % All done with double columns.
3580 \def\enddoublecolumns{%
3582 % Split the last of the double-column material. Leave it on the
3583 % current page, no automatic page break.
3586 % If we end up splitting too much material for the current page,
3587 % though, there will be another page break right after this \output
3588 % invocation ends. Having called \balancecolumns once, we do not
3589 % want to call it again. Therefore, reset \output to its normal
3590 % definition right away. (We hope \balancecolumns will never be
3591 % called on to balance too much material, but if it is, this makes
3592 % the output somewhat more palatable.)
3593 \global\output = {\onepageout{\pagecontents\PAGE}}%
3596 \endgroup % started in \begindoublecolumns
3598 % \pagegoal was set to the doubled \vsize above, since we restarted
3599 % the current page. We're now back to normal single-column
3600 % typesetting, so reset \pagegoal to the normal \vsize (after the
3601 % \endgroup where \vsize got restored).
3605 % Called at the end of the double column material.
3606 \def\balancecolumns{%
3607 \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
3609 \advance\dimen@ by \topskip
3610 \advance\dimen@ by-\baselineskip
3611 \divide\dimen@ by 2 % target to split to
3612 %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
3613 \splittopskip = \topskip
3614 % Loop until we get a decent breakpoint.
3618 \global\setbox3 = \copy0
3619 \global\setbox1 = \vsplit3 to \dimen@
3621 \global\advance\dimen@ by 1pt
3624 %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
3625 \setbox0=\vbox to\dimen@{\unvbox1}%
3626 \setbox2=\vbox to\dimen@{\unvbox3}%
3630 \catcode`\@ = \other
3633 \message{sectioning,}
3634 % Chapters, sections, etc.
3636 % \unnumberedno is an oxymoron, of course. But we count the unnumbered
3637 % sections so that we can refer to them unambiguously in the pdf
3638 % outlines by their "section number". We avoid collisions with chapter
3639 % numbers by starting them at 10000. (If a document ever has 10000
3640 % chapters, we're in trouble anyway, I'm sure.)
3641 \newcount\unnumberedno \unnumberedno = 10000
3643 \newcount\secno \secno=0
3644 \newcount\subsecno \subsecno=0
3645 \newcount\subsubsecno \subsubsecno=0
3647 % This counter is funny since it counts through charcodes of letters A, B, ...
3648 \newcount\appendixno \appendixno = `\@
3650 % \def\appendixletter{\char\the\appendixno}
3651 % We do the following ugly conditional instead of the above simple
3652 % construct for the sake of pdftex, which needs the actual
3653 % letter in the expansion, not just typeset.
3655 \def\appendixletter{%
3656 \ifnum\appendixno=`A A%
3657 \else\ifnum\appendixno=`B B%
3658 \else\ifnum\appendixno=`C C%
3659 \else\ifnum\appendixno=`D D%
3660 \else\ifnum\appendixno=`E E%
3661 \else\ifnum\appendixno=`F F%
3662 \else\ifnum\appendixno=`G G%
3663 \else\ifnum\appendixno=`H H%
3664 \else\ifnum\appendixno=`I I%
3665 \else\ifnum\appendixno=`J J%
3666 \else\ifnum\appendixno=`K K%
3667 \else\ifnum\appendixno=`L L%
3668 \else\ifnum\appendixno=`M M%
3669 \else\ifnum\appendixno=`N N%
3670 \else\ifnum\appendixno=`O O%
3671 \else\ifnum\appendixno=`P P%
3672 \else\ifnum\appendixno=`Q Q%
3673 \else\ifnum\appendixno=`R R%
3674 \else\ifnum\appendixno=`S S%
3675 \else\ifnum\appendixno=`T T%
3676 \else\ifnum\appendixno=`U U%
3677 \else\ifnum\appendixno=`V V%
3678 \else\ifnum\appendixno=`W W%
3679 \else\ifnum\appendixno=`X X%
3680 \else\ifnum\appendixno=`Y Y%
3681 \else\ifnum\appendixno=`Z Z%
3682 % The \the is necessary, despite appearances, because \appendixletter is
3683 % expanded while writing the .toc file. \char\appendixno is not
3684 % expandable, thus it is written literally, thus all appendixes come out
3685 % with the same letter (or @) in the toc without it.
3686 \else\char\the\appendixno
3687 \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
3688 \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
3690 % Each @chapter defines this as the name of the chapter.
3691 % page headings and footings can use it. @section does likewise.
3692 % However, they are not reliable, because we don't use marks.
3696 \newcount\absseclevel % used to calculate proper heading level
3697 \newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
3699 % @raisesections: treat @section as chapter, @subsection as section, etc.
3700 \def\raisesections{\global\advance\secbase by -1}
3701 \let\up=\raisesections % original BFox name
3703 % @lowersections: treat @chapter as section, @section as subsection, etc.
3704 \def\lowersections{\global\advance\secbase by 1}
3705 \let\down=\lowersections % original BFox name
3707 % Choose a numbered-heading macro
3708 % #1 is heading level if unmodified by @raisesections or @lowersections
3709 % #2 is text for heading
3710 \def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3714 \or \numberedsubseczzz{#2}%
3715 \or \numberedsubsubseczzz{#2}%
3717 \ifnum \absseclevel<0 \chapterzzz{#2}%
3718 \else \numberedsubsubseczzz{#2}%
3721 \suppressfirstparagraphindent
3724 % like \numhead, but chooses appendix heading levels
3725 \def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3728 \or \appendixsectionzzz{#2}%
3729 \or \appendixsubseczzz{#2}%
3730 \or \appendixsubsubseczzz{#2}%
3732 \ifnum \absseclevel<0 \appendixzzz{#2}%
3733 \else \appendixsubsubseczzz{#2}%
3736 \suppressfirstparagraphindent
3739 % like \numhead, but chooses numberless heading levels
3740 \def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3743 \or \unnumberedseczzz{#2}%
3744 \or \unnumberedsubseczzz{#2}%
3745 \or \unnumberedsubsubseczzz{#2}%
3747 \ifnum \absseclevel<0 \unnumberedzzz{#2}%
3748 \else \unnumberedsubsubseczzz{#2}%
3751 \suppressfirstparagraphindent
3754 % @chapter, @appendix, @unnumbered. Increment top-level counter, reset
3755 % all lower-level sectioning counters to zero.
3757 % Also set \chaplevelprefix, which we prepend to @float sequence numbers
3758 % (e.g., figures), q.v. By default (before any chapter), that is empty.
3759 \let\chaplevelprefix = \empty
3761 \outer\defparsearg\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
3763 % section resetting is \global in case the chapter is in a group, such
3764 % as an @include file.
3765 \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
3766 \global\advance\chapno by 1
3769 \gdef\chaplevelprefix{\the\chapno.}%
3772 \message{\putwordChapter\space \the\chapno}%
3774 % Write the actual heading.
3775 \chapmacro{#1}{Ynumbered}{\the\chapno}%
3777 % So @section and the like are numbered underneath this chapter.
3778 \global\let\section = \numberedsec
3779 \global\let\subsection = \numberedsubsec
3780 \global\let\subsubsection = \numberedsubsubsec
3783 \outer\defparsearg\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz
3784 \def\appendixzzz#1{%
3785 \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
3786 \global\advance\appendixno by 1
3787 \gdef\chaplevelprefix{\appendixletter.}%
3790 \def\appendixnum{\putwordAppendix\space \appendixletter}%
3791 \message{\appendixnum}%
3793 \chapmacro{#1}{Yappendix}{\appendixletter}%
3795 \global\let\section = \appendixsec
3796 \global\let\subsection = \appendixsubsec
3797 \global\let\subsubsection = \appendixsubsubsec
3800 % @centerchap is like @unnumbered, but the heading is centered.
3801 \outer\defparsearg\centerchap{{\unnumberedyyy{#1}}}
3803 \outer\defparsearg\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
3804 \def\unnumberedzzz#1{%
3805 \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
3806 \global\advance\unnumberedno by 1
3808 % Since an unnumbered as no number, no prefix for figures.
3809 \global\let\chaplevelprefix = \empty
3812 % This used to be simply \message{#1}, but TeX fully expands the
3813 % argument to \message. Therefore, if #1 contained @-commands, TeX
3814 % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
3815 % expanded @cite (which turns out to cause errors because \cite is meant
3816 % to be executed, not expanded).
3818 % Anyway, we don't want the fully-expanded definition of @cite to appear
3819 % as a result of the \message, we just want `@cite' itself. We use
3820 % \the<toks register> to achieve this: TeX expands \the<toks> only once,
3821 % simply yielding the contents of <toks register>. (We also do this for
3824 \message{(\the\toks0)}%
3826 \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
3828 \global\let\section = \unnumberedsec
3829 \global\let\subsection = \unnumberedsubsec
3830 \global\let\subsubsection = \unnumberedsubsubsec
3833 % @top is like @unnumbered.
3837 \outer\defparsearg\numberedsec{\numhead1{#1}} % normally calls seczzz
3839 \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
3840 \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
3843 \outer\defparsearg\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz
3844 \def\appendixsectionzzz#1{%
3845 \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
3846 \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
3848 \let\appendixsec\appendixsection
3850 \outer\defparsearg\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz
3851 \def\unnumberedseczzz#1{%
3852 \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
3853 \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
3857 \outer\defparsearg\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz
3858 \def\numberedsubseczzz#1{%
3859 \global\subsubsecno=0 \global\advance\subsecno by 1
3860 \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
3863 \outer\defparsearg\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz
3864 \def\appendixsubseczzz#1{%
3865 \global\subsubsecno=0 \global\advance\subsecno by 1
3866 \sectionheading{#1}{subsec}{Yappendix}%
3867 {\appendixletter.\the\secno.\the\subsecno}%
3870 \outer\defparsearg\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
3871 \def\unnumberedsubseczzz#1{%
3872 \global\subsubsecno=0 \global\advance\subsecno by 1
3873 \sectionheading{#1}{subsec}{Ynothing}%
3874 {\the\unnumberedno.\the\secno.\the\subsecno}%
3878 \outer\defparsearg\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz
3879 \def\numberedsubsubseczzz#1{%
3880 \global\advance\subsubsecno by 1
3881 \sectionheading{#1}{subsubsec}{Ynumbered}%
3882 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
3885 \outer\defparsearg\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz
3886 \def\appendixsubsubseczzz#1{%
3887 \global\advance\subsubsecno by 1
3888 \sectionheading{#1}{subsubsec}{Yappendix}%
3889 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
3892 \outer\defparsearg\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
3893 \def\unnumberedsubsubseczzz#1{%
3894 \global\advance\subsubsecno by 1
3895 \sectionheading{#1}{subsubsec}{Ynothing}%
3896 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
3899 % These are variants which are not "outer", so they can appear in @ifinfo.
3900 % Actually, they are now be obsolete; ordinary section commands should work.
3901 \def\infotop{\parsearg\unnumberedzzz}
3902 \def\infounnumbered{\parsearg\unnumberedzzz}
3903 \def\infounnumberedsec{\parsearg\unnumberedseczzz}
3904 \def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
3905 \def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
3907 \def\infoappendix{\parsearg\appendixzzz}
3908 \def\infoappendixsec{\parsearg\appendixseczzz}
3909 \def\infoappendixsubsec{\parsearg\appendixsubseczzz}
3910 \def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
3912 \def\infochapter{\parsearg\chapterzzz}
3913 \def\infosection{\parsearg\sectionzzz}
3914 \def\infosubsection{\parsearg\subsectionzzz}
3915 \def\infosubsubsection{\parsearg\subsubsectionzzz}
3917 % These macros control what the section commands do, according
3918 % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
3919 % Define them by default for a numbered chapter.
3920 \let\section = \numberedsec
3921 \let\subsection = \numberedsubsec
3922 \let\subsubsection = \numberedsubsubsec
3924 % Define @majorheading, @heading and @subheading
3926 % NOTE on use of \vbox for chapter headings, section headings, and such:
3927 % 1) We use \vbox rather than the earlier \line to permit
3928 % overlong headings to fold.
3929 % 2) \hyphenpenalty is set to 10000 because hyphenation in a
3930 % heading is obnoxious; this forbids it.
3931 % 3) Likewise, headings look best if no \parindent is used, and
3932 % if justification is not attempted. Hence \raggedright.
3936 {\advance\chapheadingskip by 10pt \chapbreak }%
3937 \parsearg\chapheadingzzz
3940 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
3941 \def\chapheadingzzz#1{%
3942 {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3943 \parindent=0pt\raggedright
3945 \bigskip \par\penalty 200\relax
3946 \suppressfirstparagraphindent
3949 % @heading, @subheading, @subsubheading.
3950 \defparsearg\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
3951 \suppressfirstparagraphindent}
3952 \defparsearg\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
3953 \suppressfirstparagraphindent}
3954 \defparsearg\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
3955 \suppressfirstparagraphindent}
3957 % These macros generate a chapter, section, etc. heading only
3958 % (including whitespace, linebreaking, etc. around it),
3959 % given all the information in convenient, parsed form.
3961 %%% Args are the skip and penalty (usually negative)
3962 \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
3964 \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
3966 %%% Define plain chapter starts, and page on/off switching for it
3967 % Parameter controlling skip before chapter headings (if needed)
3969 \newskip\chapheadingskip
3971 \def\chapbreak{\dobreak \chapheadingskip {-4000}}
3972 \def\chappager{\par\vfill\supereject}
3973 \def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
3975 \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
3978 \global\let\contentsalignmacro = \chappager
3979 \global\let\pchapsepmacro=\chapbreak
3980 \global\let\pagealignmacro=\chappager}
3983 \global\let\contentsalignmacro = \chappager
3984 \global\let\pchapsepmacro=\chappager
3985 \global\let\pagealignmacro=\chappager
3986 \global\def\HEADINGSon{\HEADINGSsingle}}
3989 \global\let\contentsalignmacro = \chapoddpage
3990 \global\let\pchapsepmacro=\chapoddpage
3991 \global\let\pagealignmacro=\chapoddpage
3992 \global\def\HEADINGSon{\HEADINGSdouble}}
3997 \global\let\chapmacro=\chfplain
3998 \global\let\centerchapmacro=\centerchfplain}
4000 % Normal chapter opening.
4002 % #1 is the text, #2 is the section type (Ynumbered, Ynothing,
4003 % Yappendix, Yomitfromtoc), #3 the chapter number.
4005 % To test against our argument.
4006 \def\Ynothingkeyword{Ynothing}
4007 \def\Yomitfromtockeyword{Yomitfromtoc}
4008 \def\Yappendixkeyword{Yappendix}
4010 \def\chfplain#1#2#3{%
4015 % Have to define \thissection before calling \donoderef, because the
4016 % xref code eventually uses it. On the other hand, it has to be called
4017 % after \pchapsepmacro, or the headline will change too soon.
4018 \gdef\thissection{#1}%
4019 \gdef\thischaptername{#1}%
4021 % Only insert the separating space if we have a chapter/appendix
4022 % number, and don't print the unnumbered ``number''.
4024 \ifx\temptype\Ynothingkeyword
4026 \def\toctype{unnchap}%
4027 \def\thischapter{#1}%
4028 \else\ifx\temptype\Yomitfromtockeyword
4029 \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
4031 \xdef\thischapter{}%
4032 \else\ifx\temptype\Yappendixkeyword
4033 \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
4035 % We don't substitute the actual chapter name into \thischapter
4036 % because we don't want its macros evaluated now. And we don't
4037 % use \thissection because that changes with each section.
4039 \xdef\thischapter{\putwordAppendix{} \appendixletter:
4040 \noexpand\thischaptername}%
4042 \setbox0 = \hbox{#3\enspace}%
4043 \def\toctype{numchap}%
4044 \xdef\thischapter{\putwordChapter{} \the\chapno:
4045 \noexpand\thischaptername}%
4048 % Write the toc entry for this chapter. Must come before the
4049 % \donoderef, because we include the current node name in the toc
4050 % entry, and \donoderef resets it to empty.
4051 \writetocentry{\toctype}{#1}{#3}%
4053 % For pdftex, we have to write out the node definition (aka, make
4054 % the pdfdest) after any page break, but before the actual text has
4055 % been typeset. If the destination for the pdf outline is after the
4056 % text, then jumping from the outline may wind up with the text not
4057 % being visible, for instance under high magnification.
4060 % Typeset the actual heading.
4061 \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
4062 \hangindent=\wd0 \centerparametersmaybe
4065 \nobreak\bigskip % no page break after a chapter title
4069 % @centerchap -- centered and unnumbered.
4070 \let\centerparametersmaybe = \relax
4071 \def\centerchfplain#1{{%
4072 \def\centerparametersmaybe{%
4073 \advance\rightskip by 3\rightskip
4074 \leftskip = \rightskip
4077 \chfplain{#1}{Ynothing}{}%
4080 \CHAPFplain % The default
4082 % I don't think this chapter style is supported any more, so I'm not
4083 % updating it with the new noderef stuff. We'll see. --karl, 11aug03.
4085 \def\unnchfopen #1{%
4086 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
4087 \parindent=0pt\raggedright
4088 \rm #1\hfill}}\bigskip \par\nobreak
4091 \def\chfopen #1#2{\chapoddpage {\chapfonts
4092 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
4096 \def\centerchfopen #1{%
4097 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
4099 \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
4103 \global\let\chapmacro=\chfopen
4104 \global\let\centerchapmacro=\centerchfopen}
4107 % Section titles. These macros combine the section number parts and
4108 % call the generic \sectionheading to do the printing.
4110 \newskip\secheadingskip
4111 \def\secheadingbreak{\dobreak \secheadingskip{-1000}}
4113 % Subsection titles.
4114 \newskip\subsecheadingskip
4115 \def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
4117 % Subsubsection titles.
4118 \def\subsubsecheadingskip{\subsecheadingskip}
4119 \def\subsubsecheadingbreak{\subsecheadingbreak}
4122 % Print any size, any type, section title.
4124 % #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
4125 % the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
4128 \def\sectionheading#1#2#3#4{%
4130 % Switch to the right set of fonts.
4131 \csname #2fonts\endcsname \rm
4133 % Insert space above the heading.
4134 \csname #2headingbreak\endcsname
4136 % Only insert the space after the number if we have a section number.
4137 \def\sectionlevel{#2}%
4140 \ifx\temptype\Ynothingkeyword
4143 \gdef\thissection{#1}%
4144 \else\ifx\temptype\Yomitfromtockeyword
4145 % for @headings -- no section number, don't include in toc,
4146 % and don't redefine \thissection.
4149 \let\sectionlevel=\empty
4150 \else\ifx\temptype\Yappendixkeyword
4151 \setbox0 = \hbox{#4\enspace}%
4153 \gdef\thissection{#1}%
4155 \setbox0 = \hbox{#4\enspace}%
4157 \gdef\thissection{#1}%
4160 % Write the toc entry (before \donoderef). See comments in \chfplain.
4161 \writetocentry{\toctype\sectionlevel}{#1}{#4}%
4163 % Write the node reference (= pdf destination for pdftex).
4164 % Again, see comments in \chfplain.
4167 % Output the actual section heading.
4168 \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
4169 \hangindent=\wd0 % zero if no section number
4172 % Add extra space after the heading -- half of whatever came above it.
4173 % Don't allow stretch, though.
4174 \kern .5 \csname #2headingskip\endcsname
4176 % Do not let the kern be a potential breakpoint, as it would be if it
4177 % was followed by glue.
4180 % We'll almost certainly start a paragraph next, so don't let that
4181 % glue accumulate. (Not a breakpoint because it's preceded by a
4182 % discardable item.)
4185 % This \nobreak is purely so the last item on the list is a \penalty
4186 % of 10000. This is so other code, for instance \parsebodycommon, can
4187 % check for and avoid allowing breakpoints. Otherwise, it would
4188 % insert a valid breakpoint between:
4189 % @section sec-whatever
4190 % @deffn def-whatever
4196 % Table of contents.
4199 % Write an entry to the toc file, opening it if necessary.
4200 % Called from @chapter, etc.
4202 % Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
4203 % We append the current node name (if any) and page number as additional
4204 % arguments for the \{chap,sec,...}entry macros which will eventually
4205 % read this. The node name is used in the pdf outlines as the
4206 % destination to jump to.
4208 % We open the .toc file for writing here instead of at @setfilename (or
4209 % any other fixed time) so that @contents can be anywhere in the document.
4210 % But if #1 is `omit', then we don't do anything. This is used for the
4211 % table of contents chapter openings themselves.
4213 \newif\iftocfileopened
4214 \def\omitkeyword{omit}%
4216 \def\writetocentry#1#2#3{%
4217 \edef\writetoctype{#1}%
4218 \ifx\writetoctype\omitkeyword \else
4219 \iftocfileopened\else
4220 \immediate\openout\tocfile = \jobname.toc
4221 \global\tocfileopenedtrue
4226 \toks2 = \expandafter{\lastnode}%
4227 \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
4228 {\the\toks2}{\noexpand\folio}}}%
4233 % Tell \shipout to create a pdf destination on each page, if we're
4234 % writing pdf. These are used in the table of contents. We can't
4235 % just write one on every page because the title pages are numbered
4236 % 1 and 2 (the page numbers aren't printed), and so are the first
4237 % two pages of the document. Thus, we'd have two destinations named
4238 % `1', and two named `2'.
4239 \ifpdf \global\pdfmakepagedesttrue \fi
4242 \newskip\contentsrightmargin \contentsrightmargin=1in
4243 \newcount\savepageno
4244 \newcount\lastnegativepageno \lastnegativepageno = -1
4246 % Prepare to read what we've written to \tocfile.
4248 \def\startcontents#1{%
4249 % If @setchapternewpage on, and @headings double, the contents should
4250 % start on an odd page, unlike chapters. Thus, we maintain
4251 % \contentsalignmacro in parallel with \pagealignmacro.
4252 % From: Torbjorn Granlund <tege@matematik.su.se>
4254 \immediate\closeout\tocfile
4256 % Don't need to put `Contents' or `Short Contents' in the headline.
4257 % It is abundantly clear what they are.
4259 \chapmacro{#1}{Yomitfromtoc}{}%
4261 \savepageno = \pageno
4262 \begingroup % Set up to handle contents files properly.
4263 \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
4264 % We can't do this, because then an actual ^ in a section
4265 % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
4266 %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
4267 \raggedbottom % Worry more about breakpoints than the bottom.
4268 \advance\hsize by -\contentsrightmargin % Don't use the full line length.
4270 % Roman numerals for page numbers.
4271 \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
4275 % Normal (long) toc.
4277 \startcontents{\putwordTOC}%
4278 \openin 1 \jobname.toc
4284 \contentsalignmacro % in case @setchapternewpage odd is in effect
4287 \lastnegativepageno = \pageno
4288 \global\pageno = \savepageno
4291 % And just the chapters.
4292 \def\summarycontents{%
4293 \startcontents{\putwordShortTOC}%
4295 \let\numchapentry = \shortchapentry
4296 \let\appentry = \shortchapentry
4297 \let\unnchapentry = \shortunnchapentry
4298 % We want a true roman here for the page numbers.
4300 \let\rm=\shortcontrm \let\bf=\shortcontbf
4301 \let\sl=\shortcontsl \let\tt=\shortconttt
4303 \hyphenpenalty = 10000
4304 \advance\baselineskip by 1pt % Open it up a little.
4305 \def\numsecentry##1##2##3##4{}
4306 \let\appsecentry = \numsecentry
4307 \let\unnsecentry = \numsecentry
4308 \let\numsubsecentry = \numsecentry
4309 \let\appsubsecentry = \numsecentry
4310 \let\unnsubsecentry = \numsecentry
4311 \let\numsubsubsecentry = \numsecentry
4312 \let\appsubsubsecentry = \numsecentry
4313 \let\unnsubsubsecentry = \numsecentry
4314 \openin 1 \jobname.toc
4320 \contentsalignmacro % in case @setchapternewpage odd is in effect
4322 \lastnegativepageno = \pageno
4323 \global\pageno = \savepageno
4325 \let\shortcontents = \summarycontents
4327 % Typeset the label for a chapter or appendix for the short contents.
4328 % The arg is, e.g., `A' for an appendix, or `3' for a chapter.
4330 \def\shortchaplabel#1{%
4331 % This space should be enough, since a single number is .5em, and the
4332 % widest letter (M) is 1em, at least in the Computer Modern fonts.
4333 % But use \hss just in case.
4334 % (This space doesn't include the extra space that gets added after
4335 % the label; that gets put in by \shortchapentry above.)
4337 % We'd like to right-justify chapter numbers, but that looks strange
4338 % with appendix letters. And right-justifying numbers and
4339 % left-justifying letters looks strange when there is less than 10
4340 % chapters. Have to read the whole toc once to know how many chapters
4341 % there are before deciding ...
4342 \hbox to 1em{#1\hss}%
4345 % These macros generate individual entries in the table of contents.
4346 % The first argument is the chapter or section name.
4347 % The last argument is the page number.
4348 % The arguments in between are the chapter number, section number, ...
4350 % Chapters, in the main contents.
4351 \def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
4353 % Chapters, in the short toc.
4354 % See comments in \dochapentry re vbox and related settings.
4355 \def\shortchapentry#1#2#3#4{%
4356 \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
4359 % Appendices, in the main contents.
4360 % Need the word Appendix, and a fixed-size box.
4362 \def\appendixbox#1{%
4363 % We use M since it's probably the widest letter.
4364 \setbox0 = \hbox{\putwordAppendix{} M}%
4365 \hbox to \wd0{\putwordAppendix{} #1\hss}}
4367 \def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
4369 % Unnumbered chapters.
4370 \def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
4371 \def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
4374 \def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
4375 \let\appsecentry=\numsecentry
4376 \def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
4379 \def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
4380 \let\appsubsecentry=\numsubsecentry
4381 \def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
4383 % And subsubsections.
4384 \def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
4385 \let\appsubsubsecentry=\numsubsubsecentry
4386 \def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
4388 % This parameter controls the indentation of the various levels.
4389 \newdimen\tocindent \tocindent = 2pc
4391 % Now for the actual typesetting. In all these, #1 is the text and #2 is the
4394 % If the toc has to be broken over pages, we want it to be at chapters
4395 % if at all possible; hence the \penalty.
4396 \def\dochapentry#1#2{%
4397 \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
4400 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4402 \nobreak\vskip .25\baselineskip plus.1\baselineskip
4405 \def\dosecentry#1#2{\begingroup
4406 \secentryfonts \leftskip=\tocindent
4407 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4410 \def\dosubsecentry#1#2{\begingroup
4411 \subsecentryfonts \leftskip=2\tocindent
4412 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4415 \def\dosubsubsecentry#1#2{\begingroup
4416 \subsubsecentryfonts \leftskip=3\tocindent
4417 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4420 % We use the same \entry macro as for the index entries.
4421 \let\tocentry = \entry
4423 % Space between chapter (or whatever) number and the title.
4424 \def\labelspace{\hskip1em \relax}
4426 \def\dopageno#1{{\rm #1}}
4427 \def\doshortpageno#1{{\rm #1}}
4429 \def\chapentryfonts{\secfonts \rm}
4430 \def\secentryfonts{\textfonts}
4431 \def\subsecentryfonts{\textfonts}
4432 \def\subsubsecentryfonts{\textfonts}
4435 \message{environments,}
4436 % @foo ... @end foo.
4438 % @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
4440 % Since these characters are used in examples, it should be an even number of
4441 % \tt widths. Each \tt character is 1en, so two makes it 1em.
4444 \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
4445 \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
4446 \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
4447 \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
4449 % The @error{} command.
4450 % Adapted from the TeXbook's \boxit.
4454 {\tentt \global\dimen0 = 3em}% Width of the box.
4455 \dimen2 = .55pt % Thickness of rules
4456 % The text. (`r' is open on the right, `e' somewhat less so on the left.)
4457 \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
4459 \setbox\errorbox=\hbox to \dimen0{\hfil
4460 \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
4461 \advance\hsize by -2\dimen2 % Rules.
4463 \hrule height\dimen2
4464 \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
4465 \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
4466 \kern3pt\vrule width\dimen2}% Space to right.
4467 \hrule height\dimen2}
4470 \def\error{\leavevmode\lower.7ex\copy\errorbox}
4472 % @tex ... @end tex escapes into raw Tex temporarily.
4473 % One exception: @ is still an escape character, so that @end tex works.
4474 % But \@ or @@ will get a plain tex @ character.
4476 \def\tex{\begingroup
4477 \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
4478 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
4479 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
4489 \let\bullet=\ptexbullet
4494 \let\equiv=\ptexequiv
4497 \let\indent=\ptexindent
4498 \let\noindent=\ptexnoindent
4506 \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
4507 \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
4509 \let\Etex=\endgroup}
4511 % Define @lisp ... @end lisp.
4512 % @lisp does a \begingroup so it can rebind things,
4513 % including the definition of @end lisp (which normally is erroneous).
4515 % Amount to narrow the margins by for @lisp.
4516 \newskip\lispnarrowing \lispnarrowing=0.4in
4518 % This is the definition that ^^M gets inside @lisp, @example, and other
4519 % such environments. \null is better than a space, since it doesn't
4521 \def\lisppar{\null\endgraf}
4523 % This space is always present above and below environments.
4524 \newskip\envskipamount \envskipamount = 0pt
4526 % Make spacing and below environment symmetrical. We use \parskip here
4527 % to help in doing that, since in @example-like environments \parskip
4528 % is reset to zero; thus the \afterenvbreak inserts no space -- but the
4529 % start of the next paragraph will insert \parskip.
4531 \def\aboveenvbreak{{%
4532 % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
4533 \ifnum \lastpenalty=10000 \else
4534 \advance\envskipamount by \parskip
4536 \ifdim\lastskip<\envskipamount
4538 % it's not a good place to break if the last penalty was \nobreak
4540 \ifnum\lastpenalty>10000 \else \penalty-50 \fi
4541 \vskip\envskipamount
4546 \let\afterenvbreak = \aboveenvbreak
4548 % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
4549 \let\nonarrowing=\relax
4551 % @cartouche ... @end cartouche: draw rectangle w/rounded corners around
4552 % environment contents.
4553 \font\circle=lcircle10
4555 \newdimen\cartouter\newdimen\cartinner
4556 \newskip\normbskip\newskip\normpskip\newskip\normlskip
4557 \circthick=\fontdimen8\circle
4559 \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
4560 \def\ctr{{\hskip 6pt\circle\char'010}}
4561 \def\cbl{{\circle\char'012\hskip -6pt}}
4562 \def\cbr{{\hskip 6pt\circle\char'011}}
4563 \def\carttop{\hbox to \cartouter{\hskip\lskip
4564 \ctl\leaders\hrule height\circthick\hfil\ctr
4566 \def\cartbot{\hbox to \cartouter{\hskip\lskip
4567 \cbl\leaders\hrule height\circthick\hfil\cbr
4570 \newskip\lskip\newskip\rskip
4574 \ifhmode\par\fi % can't be in the midst of a paragraph.
4576 \lskip=\leftskip \rskip=\rightskip
4577 \leftskip=0pt\rightskip=0pt % we want these *outside*.
4578 \cartinner=\hsize \advance\cartinner by-\lskip
4579 \advance\cartinner by-\rskip
4581 \advance\cartouter by 18.4pt % allow for 3pt kerns on either
4582 % side, and for 6pt waste from
4583 % each corner char, and rule thickness
4584 \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
4585 % Flag to tell @lisp, etc., not to narrow margin.
4586 \let\nonarrowing=\comment
4588 \baselineskip=0pt\parskip=0pt\lineskip=0pt
4596 \baselineskip=\normbskip
4597 \lineskip=\normlskip
4600 \comment % For explanation, see the end of \def\group.
4616 % This macro is called at the beginning of all the @example variants,
4620 \inENV % This group ends at the end of the body
4621 \hfuzz = 12pt % Don't be fussy
4622 \sepspaces % Make spaces be word-separators rather than space tokens.
4623 \let\par = \lisppar % don't ignore blank lines
4624 \obeylines % each line of input is a line of output
4627 \emergencystretch = 0pt % don't try to avoid overfull boxes
4628 % @cartouche defines \nonarrowing to inhibit narrowing
4629 % at next level down.
4630 \ifx\nonarrowing\relax
4631 \advance \leftskip by \lispnarrowing
4632 \exdentamount=\lispnarrowing
4633 \let\exdent=\nofillexdent
4634 \let\nonarrowing=\relax
4638 % Define the \E... control sequence only if we are inside the particular
4639 % environment, so the error checking in \end will work.
4641 % To end an @example-like environment, we first end the paragraph (via
4642 % \afterenvbreak's vertical glue), and then the group. That way we keep
4643 % the zero \parskip that the environments set -- \parskip glue will be
4644 % inserted at the beginning of the next paragraph in the document, after
4647 \def\nonfillfinish{\afterenvbreak\endgroup}
4649 % @lisp: indented, narrowed, typewriter font.
4650 \def\lisp{\begingroup
4652 \let\Elisp = \nonfillfinish
4654 \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
4655 \gobble % eat return
4658 % @example: Same as @lisp.
4659 \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4661 % @smallexample and @smalllisp: use smaller fonts.
4662 % Originally contributed by Pavel@xerox.
4663 \def\smalllisp{\begingroup
4664 \def\Esmalllisp{\nonfillfinish\endgroup}%
4665 \def\Esmallexample{\nonfillfinish\endgroup}%
4669 \let\smallexample = \smalllisp
4672 % @display: same as @lisp except keep current font.
4674 \def\display{\begingroup
4676 \let\Edisplay = \nonfillfinish
4680 % @smalldisplay: @display plus smaller fonts.
4682 \def\smalldisplay{\begingroup
4683 \def\Esmalldisplay{\nonfillfinish\endgroup}%
4684 \smallexamplefonts \rm
4688 % @format: same as @display except don't narrow margins.
4690 \def\format{\begingroup
4691 \let\nonarrowing = t%
4693 \let\Eformat = \nonfillfinish
4697 % @smallformat: @format plus smaller fonts.
4699 \def\smallformat{\begingroup
4700 \def\Esmallformat{\nonfillfinish\endgroup}%
4701 \smallexamplefonts \rm
4705 % @flushleft (same as @format).
4707 \def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
4711 \def\flushright{\begingroup
4712 \let\nonarrowing = t%
4714 \let\Eflushright = \nonfillfinish
4715 \advance\leftskip by 0pt plus 1fill
4720 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
4721 % and narrows the margins.
4724 \begingroup\inENV %This group ends at the end of the @quotation body
4725 {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
4727 % We have retained a nonzero parskip for the environment, since we're
4728 % doing normal filling. So to avoid extra space below the environment...
4729 \def\Equotation{\parskip = 0pt \nonfillfinish}%
4731 % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
4732 \ifx\nonarrowing\relax
4733 \advance\leftskip by \lispnarrowing
4734 \advance\rightskip by \lispnarrowing
4735 \exdentamount = \lispnarrowing
4736 \let\nonarrowing = \relax
4738 \parsearg\quotationlabel
4741 % If we're given an argument, typeset it in bold with a colon after.
4742 \def\quotationlabel#1{%
4744 \ifx\temp\empty \else
4750 % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
4751 % If we want to allow any <char> as delimiter,
4752 % we need the curly braces so that makeinfo sees the @verb command, eg:
4753 % `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
4755 % [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
4757 % [Knuth] p.344; only we need to do the other characters Texinfo sets
4758 % active too. Otherwise, they get lost as the first character on a
4761 \do\ \do\\\do\{\do\}\do\$\do\&%
4762 \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
4763 \do\<\do\>\do\|\do\@\do+\do\"%
4767 \def\uncatcodespecials{%
4768 \def\do##1{\catcode`##1=\other}\dospecials}
4770 % [Knuth] pp. 380,381,391
4771 % Disable Spanish ligatures ?` and !` of \tt font
4773 \catcode`\`=\active\gdef`{\relax\lq}
4776 % Setup for the @verb command.
4778 % Eight spaces for a tab
4780 \catcode`\^^I=\active
4781 \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
4785 \tt % easiest (and conventionally used) font for verbatim
4786 \def\par{\leavevmode\endgraf}%
4789 % Respect line breaks,
4790 % print special symbols as themselves, and
4791 % make each space count
4792 % must do in this order:
4793 \obeylines \uncatcodespecials \sepspaces
4796 % Setup for the @verbatim environment
4798 % Real tab expansion
4799 \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
4801 \def\starttabbox{\setbox0=\hbox\bgroup}
4803 \catcode`\^^I=\active
4805 \catcode`\^^I=\active
4806 \def^^I{\leavevmode\egroup
4807 \dimen0=\wd0 % the width so far, or since the previous tab
4808 \divide\dimen0 by\tabw
4809 \multiply\dimen0 by\tabw % compute previous multiple of \tabw
4810 \advance\dimen0 by\tabw % advance to next multiple of \tabw
4811 \wd0=\dimen0 \box0 \starttabbox
4815 \def\setupverbatim{%
4817 \advance\leftskip by -\defbodyindent
4818 % Easiest (and conventionally used) font for verbatim
4820 \def\par{\leavevmode\egroup\box0\endgraf}%
4823 % Respect line breaks,
4824 % print special symbols as themselves, and
4825 % make each space count
4826 % must do in this order:
4827 \obeylines \uncatcodespecials \sepspaces
4828 \everypar{\starttabbox}%
4831 % Do the @verb magic: verbatim text is quoted by unique
4832 % delimiter characters. Before first delimiter expect a
4833 % right brace, after last delimiter expect closing brace:
4835 % \def\doverb'{'<char>#1<char>'}'{#1}
4837 % [Knuth] p. 382; only eat outer {}
4839 \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
4840 \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
4843 \def\verb{\begingroup\setupverb\doverb}
4846 % Do the @verbatim magic: define the macro \doverbatim so that
4847 % the (first) argument ends when '@end verbatim' is reached, ie:
4849 % \def\doverbatim#1@end verbatim{#1}
4851 % For Texinfo it's a lot easier than for LaTeX,
4852 % because texinfo's \verbatim doesn't stop at '\end{verbatim}':
4853 % we need not redefine '\', '{' and '}'.
4855 % Inspired by LaTeX's verbatim command set [latex.ltx]
4860 % ignore everything up to the first ^^M, that's the newline at the end
4861 % of the @verbatim input line itself. Otherwise we get an extra blank
4862 % line in the output.
4863 \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
4864 % We really want {...\end verbatim} in the body of the macro, but
4865 % without the active space; thus we have to use \xdef and \gobble.
4869 \let\Everbatim\nonfillfinish
4871 \setupverbatim\doverbatim
4874 % @verbatiminclude FILE - insert text of file in verbatim environment.
4876 \def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
4878 \def\doverbatiminclude#1{%
4880 \makevalueexpandable
4883 \nonfillfinish % contains \endgroup
4886 % @copying ... @end copying.
4887 % Save the text away for @insertcopying later. Many commands won't be
4888 % allowed in this context, but that's ok.
4890 % We save the uninterpreted tokens, rather than creating a box.
4891 % Saving the text in a box would be much easier, but then all the
4892 % typesetting commands (@smallbook, font changes, etc.) have to be done
4893 % beforehand -- and a) we want @copying to be done first in the source
4894 % file; b) letting users define the frontmatter in as flexible order as
4895 % possible is very desirable.
4897 \def\copying{\begingroup
4898 % Define a command to swallow text until we reach `@end copying'.
4899 % \ is the escape char in this texinfo.tex file, so it is the
4900 % delimiter for the command; @ will be the escape char when we read
4901 % it, but that doesn't matter.
4902 \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
4904 % We must preserve ^^M's in the input file; see \insertcopying below.
4905 \catcode`\^^M = \active
4909 % What we do to finish off the copying text.
4911 \def\enddocopying{\endgroup\ignorespaces}
4913 % @insertcopying. Here we must play games with ^^M's. On the one hand,
4914 % we need them to delimit commands such as `@end quotation', so they
4915 % must be active. On the other hand, we certainly don't want every
4916 % end-of-line to be a \par, as would happen with the normal active
4917 % definition of ^^M. On the third hand, two ^^M's in a row should still
4920 % Our approach is to make ^^M insert a space and a penalty1 normally;
4921 % then it can also check if \lastpenalty=1. If it does, then manually
4924 % This messes up the normal definitions of @c[omment], so we redefine
4925 % it. Similarly for @ignore. (These commands are used in the gcc
4926 % manual for man page generation.)
4928 % Seems pretty fragile, most line-oriented commands will presumably
4929 % fail, but for the limited use of getting the copying text (which
4930 % should be quite simple) inserted, we can hope it's ok.
4932 {\catcode`\^^M=\active %
4933 \gdef\insertcopying{\begingroup %
4934 \parindent = 0pt % looks wrong on title page
4936 \ifnum \lastpenalty=1 %
4943 % Fix @c[omment] for catcode 13 ^^M's.
4944 \def\c##1^^M{\ignorespaces}%
4947 % Don't bother jumping through all the hoops that \doignore does, it
4948 % would be very hard since the catcodes are already set.
4949 \long\def\ignore##1\end ignore{\ignorespaces}%
4958 \newskip\defbodyindent \defbodyindent=.4in
4959 \newskip\defargsindent \defargsindent=50pt
4960 \newskip\deflastargmargin \deflastargmargin=18pt
4962 % \startdefun \deffn
4963 % -- starts the processing of @deffn
4967 \ifnum\lastpenalty<10000
4970 % If there are two @def commands in a row, we'll have a \nobreak,
4971 % which is there to keep the function description together with its
4972 % header. But if there's nothing but headers, we need to allow a
4973 % break somewhere. Check for penalty 10002 (inserted by
4974 % \defargscommonending) instead of 10000, since the sectioning
4975 % commands insert a \penalty10000, and we don't want to allow a break
4976 % between a section heading and a defun.
4977 \ifnum\lastpenalty=10002 \penalty2000 \fi
4979 % Similarly, after a section heading, do not allow a break.
4980 % But do insert the glue.
4981 \medskip % preceded by discardable penalty, so not a breakpoint
4985 \advance\leftskip by \defbodyindent
4986 \exdentamount=\defbodyindent
4989 % \dodefunx \startdefun \deffn
4990 % -- converts \deffn expansion to \deffnx, omitting \startdefun.
4991 \def\dodefunx \startdefun #1{%
4992 % As above, allow line break if we have multiple x headers in a row.
4993 % It's not a great place, though.
4994 \ifnum\lastpenalty=10002 \penalty3000 \fi
4996 % Check whether we are inside the corresponding @defun.
5000 \errmessage{\expandafter\string\temp x inside
5001 \expandafter\noexpand\thisenv environment}%
5005 % Without continued lines we'd just have:
5006 % \def\parsedefunline#1{\parseargusing\activeparens{\parsedefunlineX#1}}
5007 % \def\parsedefunlineX#1#2{\printdefunline #1#2\DefunTerm}
5008 % but with continuations, things are much more complicated.
5010 \def\parsedefunline#1{%
5011 \def\defunlinemacro{#1}% store \deffnheader (initially)
5014 \def\parsedefunlineX{%
5015 \parseargusing\activeparens\parsedefunlineY
5017 \def\parsedefunlineY#1{%
5018 % We have to prepend a token to prevent brace stripping;
5019 % \defunlinemacro just comes handy.
5020 \defunchkspace\defunlinemacro#1\DefunMid\ \DefunMid\DefunTerm
5022 \def\defunchkspace#1\ \DefunMid#2\DefunTerm{%
5025 % The line doesn't end with `@ '; in this case, #1 ends with \DefunMid.
5026 \let\next\defunchktab
5028 % `@ ' was found and stripped.
5031 \next#1\^^I\DefunMid\DefunTerm
5033 \def\defunchktab#1\^^I\DefunMid#2\DefunTerm{%
5036 % The line doesn't end with `@TAB', either.
5037 \let\next\defunchkfinish
5039 % `@TAB' was found and stripped.
5042 \next#1\^^I\DefunMid\DefunTerm
5044 \def\defunloop#1\^^I\DefunMid\DefunTerm{%
5045 % Expand the \defunlinemacro token at the beginning of #1.
5046 \expandafter\def\expandafter\defunlinemacro
5050 \def\defunchkfinish#1\DefunMid\^^I%\DefunMid\DefunTerm -- stays here
5052 % #1 starts with \defunlinemacro, which is expanded and its expansion
5053 % starts with eg. \deffnheader.
5054 \expandafter\replaceeols #1\^^M%\DefunMid\DefunTerm -- stays here
5057 % Each occurence of `\^^M' or `<space>\^^M' is replaced by a single space.
5059 % The parameters start with \deffnheader token, so trere is no risk braces
5060 % could be stripped at #1. And we have a \DefunMid token just before
5061 % \DefunTerm, so we cannot loose braces at #2 either. Uff!
5063 \def\replaceeols#1\^^M#2\DefunTerm{%
5066 % This \^^M is the terminating one.
5067 \printdefunline #1\DefunTerm
5069 \replaceeolsX#1\^^M \^^M#2\DefunTerm
5072 \def\replaceeolsX#1 \^^M{\replaceeolsY#1\^^M}
5073 \def\replaceeolsY#1\^^M#2\^^M{\replaceeols#1 }
5074 \def\stripDefunMid#1\DefunMid{\def\temp{#1}}
5076 % \printdefunline \deffnheader text\DefunTerm
5078 \def\printdefunline#1\DefunTerm{%
5080 % call \deffnheader:
5083 \interlinepenalty = 10000
5084 \advance\rightskip by 0pt plus 1fil
5086 \nobreak\vskip -\parskip
5087 \penalty 10002 % signal to \startdefun and \dodefunx
5088 % Some of the @defun-type tags do not enable magic parentheses,
5089 % rendering the following check redundant. But we don't optimize.
5094 \def\Edefun{\endgraf\endgroup\medbreak}
5096 % \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
5097 % the only thing remainnig is to define \deffnheader.
5100 \expandafter\let\csname E#1\endcsname = \Edefun
5101 \edef\temp{\noexpand\domakedefun
5102 \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
5106 % \domakedefun \deffn \deffnx \deffnheader
5108 % Define \deffn and \deffnx, without parameters.
5109 % \deffnheader has to be defined explicitly.
5111 \def\domakedefun#1#2#3{%
5116 % A tricky way to recycle the code defined above:
5117 \def#2{\expandafter\dodefunx#1}%
5120 % Untyped functions (@deffn, @defop):
5122 \makedefun{deffn} % category name args
5123 \def\deffnheader{\deffngeneral{}}
5125 \makedefun{defop} % category class name args
5126 \def\defopheader#1 {\defopon{#1\ \putwordon}}
5128 % \defopon {category on}class name args
5129 \def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
5131 % \deffngeneral {subind}category name args
5133 \def\deffngeneral#1#2 #3 #4\endheader{%
5134 % Remember that \dosubin{fn}{xxx}{} is equivalent to \doind{fn}{xxx}.
5135 \dosubind{fn}{\code{#3}}{#1}%
5136 \defname{#2}{}{#3}\ampdefunargs{#4\unskip}%
5139 % Typed functions (@deftypefn, @deftypeop):
5141 \makedefun{deftypefn} % category type name args
5142 \def\deftypefnheader{\deftypefngeneral{}}
5144 \makedefun{deftypeop} % category class type name args
5145 \def\deftypeopheader#1 {\deftypeopon{#1\ \putwordon}}
5147 % \deftypeopon {category on}class type name args
5148 \def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
5150 % \deftypefngeneral {subind}category type name args
5152 \def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
5153 \dosubind{fn}{\code{#4}}{#1}%
5154 \defname{#2}{#3}{#4}\normaldefunargs{#5\unskip}%
5157 % Typed variables (@deftypevr, @deftypecv):
5159 \makedefun{deftypevr}% category type var args
5160 \def\deftypevrheader{\deftypecvgeneral{}}
5162 \makedefun{deftypecv}% category class type var args
5163 \def\deftypecvheader#1 {\deftypecvof{#1\ \putwordof}}
5165 % \deftypecvof {category of}class type var args
5166 \def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
5168 % \deftypecvgeneral {subind}category type var args
5170 \def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
5171 \dosubind{vr}{\code{#4}}{#1}%
5172 \defname{#2}{#3}{#4}\normaldefunargs{#5\unskip}%
5175 % Untyped variables (@defvr, @defcv):
5176 \makedefun{defvr}% category var args
5177 \def\defvrheader#1 {\deftypevrheader{#1} {} }
5179 \makedefun{defcv}% category class var args
5180 \def\defcvheader#1 {\defcvof{#1\ \putwordof}}
5182 % \defcvof {category of}class var args
5183 \def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
5186 \makedefun{deftp}% category name args
5187 \def\deftpheader#1 #2 #3\endheader{%
5188 \doind{tp}{\code{#2}}%
5189 \defname{#1}{}{#2}\normaldefunargs{#3\unskip}%
5192 % Remaining @defun-like shortcuts:
5193 \makedefun{defun} \def\defunheader{\deffnheader{\putwordDeffunc} }
5194 \makedefun{defmac} \def\defmacheader{\deffnheader{\putwordDefmac} }
5195 \makedefun{defspec} \def\defspecheader{\deffnheader{\putwordDefspec} }
5196 \makedefun{deftypefun}\def\deftypefunheader{\deftypefnheader{\putwordDeffunc} }
5197 \makedefun{defvar} \def\defvarheader{\defvrheader{\putwordDefvar} }
5198 \makedefun{defopt} \def\defoptheader{\defvrheader{\putwordDefopt} }
5199 \makedefun{deftypevar}\def\deftypevarheader{\deftypevrheader{\putwordDefvar} }
5200 \makedefun{defmethod} \def\defmethodheader{\defopon\putwordMethodon}
5201 \makedefun{deftypemethod}\def\deftypemethodheader{\deftypeopon\putwordMethodon}
5202 \makedefun{defivar} \def\defivarheader{\defcvof\putwordInstanceVariableof}
5203 \makedefun{deftypeivar}\def\deftypeivarheader{\deftypecvof\putwordInstanceVariableof}
5205 % \defname, which formats the name of the @def (not the args).
5206 % #1 is the category, such as "Function".
5207 % #2 is the return type, if any.
5208 % #3 is the function name.
5210 % We are followed by (but not passed) the arguments, if any.
5212 \def\defname#1#2#3{%
5213 % Get the values of \leftskip and \rightskip as they were outside the @def...
5214 \advance\leftskip by -\defbodyindent
5216 % How we'll format the type name. Putting it in brackets helps
5217 % distinguish it from the body text that may end up on the next line
5220 \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
5222 % Figure out line sizes for the paragraph shape.
5223 % The first line needs space for \box0; but if \rightskip is nonzero,
5224 % we need only space for the part of \box0 which exceeds it:
5225 \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip
5226 % The continuations:
5227 \dimen2=\hsize \advance\dimen2 by -\defargsindent
5228 % (plain.tex says that \dimen1 should be used only as global.)
5229 \parshape 2 0in \dimen0 \defargsindent \dimen2
5231 % Put the type name to the right margin.
5234 \hfil\box0 \kern-\hsize
5235 % \hsize has to be shortened this way:
5237 % Intentionally do not respect \rightskip, since we need the space.
5240 % Allow all lines to be underfull without complaint:
5241 \tolerance=10000 \hbadness=10000
5242 \exdentamount=\defbodyindent
5244 % defun fonts. We use typewriter by default (used to be bold) because:
5245 % . we're printing identifiers, they should be in tt in principle.
5246 % . in languages with many accents, such as Czech or French, it's
5247 % common to leave accents off identifiers. The result looks ok in
5248 % tt, but exceedingly strange in rm.
5249 % . we don't want -- and --- to be treated as ligatures.
5250 % . this still does not fix the ?` and !` ligatures, but so far no
5251 % one has made identifiers using them :).
5253 \def\temp{#2}% return value type
5254 \ifx\temp\empty\else \tclose{\temp} \fi
5255 #3% output function name
5257 {\rm\enskip}% hskip 0.5 em of \tenrm
5260 % arguments will be output next, if any.
5263 % This expands the args, with & being treated magically.
5270 % Print arguments in slanted typewriter, prevent hyphenation at `-' chars.
5272 \def\normaldefunargs#1{%
5273 % use sl by default (not ttsl), inconsistently with using tt for the
5274 % name. This is because literal text is sometimes needed in the
5275 % argument list (groff manual), and ttsl and tt are not very
5278 \df \sl \hyphenchar\font=0
5279 % On the other hand, if an argument has two dashes (for instance), we
5280 % want a way to get ttsl. Let's try @var for that.
5283 \sl\hyphenchar\font=45
5286 % We want ()&[] to print specially on the defun line.
5289 \catcode`\(=\active \catcode`\)=\active
5290 \catcode`\[=\active \catcode`\]=\active
5294 % Make control sequences which act like normal parenthesis chars.
5295 \let\lparen = ( \let\rparen = )
5297 % Be sure that we always have a definition for `(', etc. For example,
5298 % if the fn name has parens in it, \boldbrax will not be in effect yet,
5299 % so TeX would otherwise complain about undefined control sequence.
5302 \global\let(=\lparen \global\let)=\rparen
5303 \global\let[=\lbrack \global\let]=\rbrack
5306 \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
5307 \gdef\magicamp{\let&=\amprm}
5310 \newcount\parencount
5312 % If we encounter &foo, then turn on ()-hacking afterwards
5314 \def\amprm#1 {\ampseentrue{\bf\ }}
5318 % At the first level, print parens in roman,
5319 % otherwise use the default font.
5320 \ifnum \parencount=1 \rm \fi
5322 % The \sf parens (in \boldbrax) actually are a little bolder than
5323 % the contained text. This is especially needed for [ and ] .
5327 \def\infirstlevel#1{%
5334 \def\bfafterword#1 {#1 \bf}
5337 \global\advance\parencount by 1
5339 \infirstlevel \bfafterword
5344 \global\advance\parencount by -1
5347 \newcount\brackcount
5349 \global\advance\brackcount by 1
5354 \global\advance\brackcount by -1
5357 \def\checkparencounts{%
5358 \ifnum\parencount=0 \else \badparencount \fi
5359 \ifnum\brackcount=0 \else \badbrackcount \fi
5361 \def\badparencount{%
5362 \errmessage{Unbalanced parentheses in @def}%
5363 \global\parencount=0
5365 \def\badbrackcount{%
5366 \errmessage{Unbalanced square braces in @def}%
5367 \global\brackcount=0
5374 % To do this right we need a feature of e-TeX, \scantokens,
5375 % which we arrange to emulate with a temporary file in ordinary TeX.
5376 \ifx\eTeXversion\undefined
5377 \newwrite\macscribble
5379 \begingroup \newlinechar`\^^M
5380 % Undo catcode changes of \startcontents and \doprintindex
5381 \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
5382 % Append \endinput to make sure that TeX does not see the ending newline.
5383 \toks0={#1\endinput}%
5384 \immediate\openout\macscribble=\jobname.tmp
5385 \immediate\write\macscribble{\the\toks0}%
5386 \immediate\closeout\macscribble
5387 \let\xeatspaces\eatspaces
5393 \begingroup \newlinechar`\^^M
5394 % Undo catcode changes of \startcontents and \doprintindex
5395 \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
5396 \let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
5399 \newcount\paramno % Count of parameters
5400 \newtoks\macname % Macro name
5401 \newif\ifrecursive % Is it recursive?
5402 \def\macrolist{} % List of all defined macros in the form
5403 % \do\macro1\do\macro2...
5406 % Thisdoes \let #1 = #2, except with \csnames.
5408 \expandafter\expandafter
5410 \expandafter\expandafter
5412 \csname#2\endcsname}
5414 % Trim leading and trailing spaces off a string.
5415 % Concepts from aro-bend problem 15 (see CTAN).
5417 \gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
5418 \gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
5419 \gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
5421 \unbrace{\gdef\trim@@@ #1 } #2@{#1}
5424 % Trim a single trailing ^^M off a string.
5425 {\catcode`\^^M=\other \catcode`\Q=3%
5426 \gdef\eatcr #1{\eatcra #1Q^^MQ}%
5427 \gdef\eatcra#1^^MQ{\eatcrb#1Q}%
5428 \gdef\eatcrb#1Q#2Q{#1}%
5431 % Macro bodies are absorbed as an argument in a context where
5432 % all characters are catcode 10, 11 or 12, except \ which is active
5433 % (as in normal texinfo). It is necessary to change the definition of \.
5435 % It's necessary to have hard CRs when the macro is executed. This is
5436 % done by making ^^M (\endlinechar) catcode 12 when reading the macro
5437 % body, and then making it the \newlinechar in \scanmacro.
5439 \def\macrobodyctxt{%
5450 \catcode`\^^M=\other
5464 % \mbodybackslash is the definition of \ in @macro bodies.
5465 % It maps \foo\ => \csname macarg.foo\endcsname => #N
5466 % where N is the macro parameter number.
5467 % We define \csname macarg.\endcsname to be \realbackslash, so
5468 % \\ in macro replacement text gets you a backslash.
5470 {\catcode`@=0 @catcode`@\=@active
5471 @gdef@usembodybackslash{@let\=@mbodybackslash}
5472 @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
5474 \expandafter\def\csname macarg.\endcsname{\realbackslash}
5476 \def\macro{\recursivefalse\parsearg\macroxxx}
5477 \def\rmacro{\recursivetrue\parsearg\macroxxx}
5480 \getargs{#1}% now \macname is the macname and \argl the arglist
5481 \ifx\argl\empty % no arguments
5484 \expandafter\parsemargdef \argl;%
5486 \if1\csname ismacro.\the\macname\endcsname
5487 \message{Warning: redefining \the\macname}%
5489 \expandafter\ifx\csname \the\macname\endcsname \relax
5490 \else \errmessage{Macro name \the\macname\space already defined}\fi
5491 \global\cslet{macsave.\the\macname}{\the\macname}%
5492 \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
5493 % Add the macroname to \macrolist
5494 \toks0 = \expandafter{\macrolist\do}%
5495 \xdef\macrolist{\the\toks0
5496 \expandafter\noexpand\csname\the\macname\endcsname}%
5498 \begingroup \macrobodyctxt
5499 \ifrecursive \expandafter\parsermacbody
5500 \else \expandafter\parsemacbody
5503 \defparsearg\unmacro{%
5504 \if1\csname ismacro.#1\endcsname
5505 \global\cslet{#1}{macsave.#1}%
5506 \global\expandafter\let \csname ismacro.#1\endcsname=0%
5507 % Remove the macro name from \macrolist:
5509 \expandafter\let\csname#1\endcsname \relax
5511 \xdef\macrolist{\macrolist}%
5514 \errmessage{Macro #1 not defined}%
5518 % Called by \do from \dounmacro on each macro. The idea is to omit any
5519 % macro definitions that have been changed to \relax.
5525 \noexpand\do \noexpand #1%
5529 % This makes use of the obscure feature that if the last token of a
5530 % <parameter list> is #, then the preceding argument is delimited by
5531 % an opening brace, and that opening brace is not consumed.
5532 \def\getargs#1{\getargsxxx#1{}}
5533 \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
5534 \def\getmacname #1 #2\relax{\macname={#1}}
5535 \def\getmacargs#1{\def\argl{#1}}
5537 % Parse the optional {params} list. Set up \paramno and \paramlist
5538 % so \defmacro knows what to do. Define \macarg.blah for each blah
5539 % in the params list, to be ##N where N is the position in that list.
5540 % That gets used by \mbodybackslash (above).
5542 % We need to get `macro parameter char #' into several definitions.
5543 % The technique used is stolen from LaTeX: let \hash be something
5544 % unexpandable, insert that wherever you need a #, and then redefine
5545 % it to # just before using the token list produced.
5547 % The same technique is used to protect \eatspaces till just before
5548 % the macro is used.
5550 \def\parsemargdef#1;{\paramno=0\def\paramlist{}%
5551 \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
5552 \def\parsemargdefxxx#1,{%
5553 \if#1;\let\next=\relax
5554 \else \let\next=\parsemargdefxxx
5555 \advance\paramno by 1%
5556 \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
5557 {\xeatspaces{\hash\the\paramno}}%
5558 \edef\paramlist{\paramlist\hash\the\paramno,}%
5561 % These two commands read recursive and nonrecursive macro bodies.
5562 % (They're different since rec and nonrec macros end differently.)
5564 \long\def\parsemacbody#1@end macro%
5565 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5566 \long\def\parsermacbody#1@end rmacro%
5567 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5569 % This defines the macro itself. There are six cases: recursive and
5570 % nonrecursive macros of zero, one, and many arguments.
5571 % Much magic with \expandafter here.
5572 % \xdef is used so that macro definitions will survive the file
5573 % they're defined in; @include reads the file inside a group.
5575 \let\hash=##% convert placeholders to macro parameter chars
5579 \expandafter\xdef\csname\the\macname\endcsname{%
5580 \noexpand\scanmacro{\temp}}%
5582 \expandafter\xdef\csname\the\macname\endcsname{%
5583 \bgroup\noexpand\macroargctxt
5584 \noexpand\braceorline
5585 \expandafter\noexpand\csname\the\macname xxx\endcsname}%
5586 \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5587 \egroup\noexpand\scanmacro{\temp}}%
5589 \expandafter\xdef\csname\the\macname\endcsname{%
5590 \bgroup\noexpand\macroargctxt
5591 \noexpand\csname\the\macname xx\endcsname}%
5592 \expandafter\xdef\csname\the\macname xx\endcsname##1{%
5593 \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5594 \expandafter\expandafter
5596 \expandafter\expandafter
5597 \csname\the\macname xxx\endcsname
5598 \paramlist{\egroup\noexpand\scanmacro{\temp}}%
5603 \expandafter\xdef\csname\the\macname\endcsname{%
5604 \noexpand\norecurse{\the\macname}%
5605 \noexpand\scanmacro{\temp}\egroup}%
5607 \expandafter\xdef\csname\the\macname\endcsname{%
5608 \bgroup\noexpand\macroargctxt
5609 \noexpand\braceorline
5610 \expandafter\noexpand\csname\the\macname xxx\endcsname}%
5611 \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5613 \noexpand\norecurse{\the\macname}%
5614 \noexpand\scanmacro{\temp}\egroup}%
5616 \expandafter\xdef\csname\the\macname\endcsname{%
5617 \bgroup\noexpand\macroargctxt
5618 \expandafter\noexpand\csname\the\macname xx\endcsname}%
5619 \expandafter\xdef\csname\the\macname xx\endcsname##1{%
5620 \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5621 \expandafter\expandafter
5623 \expandafter\expandafter
5624 \csname\the\macname xxx\endcsname
5627 \noexpand\norecurse{\the\macname}%
5628 \noexpand\scanmacro{\temp}\egroup}%
5632 \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
5634 % \braceorline decides whether the next nonwhitespace character is a
5635 % {. If so it reads up to the closing }, if not, it reads the whole
5636 % line. Whatever was read is then fed to the next control sequence
5637 % as an argument (by \parsebrace or \parsearg)
5638 \def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
5639 \def\braceorlinexxx{%
5640 \ifx\nchar\bgroup\else
5641 \expandafter\parsearg
5644 % We mant to disable all macros during \shipout so that they are not
5645 % expanded by \write.
5646 \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
5647 \edef\next{\macrolist}\expandafter\endgroup\next}
5651 % We need some trickery to remove the optional spaces around the equal
5652 % sign. Just make them active and then expand them all to nothing.
5653 \def\alias{\parseargusing\obeyspaces\aliasxxx}
5654 \def\aliasxxx #1{\aliasyyy#1\relax}
5655 \def\aliasyyy #1=#2\relax{%
5657 \expandafter\let\obeyedspace=\empty
5658 \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
5664 \message{cross references,}
5668 \newif\ifhavexrefs % True if xref values are known.
5669 \newif\ifwarnedxrefs % True if we warned once that they aren't known.
5671 % @inforef is relatively simple.
5672 \def\inforef #1{\inforefzzz #1,,,,**}
5673 \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
5674 node \samp{\ignorespaces#1{}}}
5676 % @node's only job in TeX is to define \lastnode, which is used in
5678 \defparsearg\node{\ENVcheck\nodexxx #1,\finishnodeparse}
5679 \def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
5681 \let\lastnode=\empty
5683 % Write a cross-reference definition for the current node. #1 is the
5684 % type (Ynumbered, Yappendix, Ynothing).
5687 \ifx\lastnode\empty\else
5688 \setref{\lastnode}{#1}%
5689 \global\let\lastnode=\empty
5693 % @anchor{NAME} -- define xref target at arbitrary point.
5695 \newcount\savesfregister
5697 \gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
5698 \gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
5701 \setref{#1}{Ynothing}%
5706 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
5707 % anchor), which consists of three parts:
5708 % 1) NAME-title - the current sectioning name, taken from \thissection;
5709 % 2) NAME-snt - section number and type, defined as the SNT arg;
5710 % 3) NAME-pg - the page number.
5711 % This is called from \donoderef, \anchor, and \dofloat.
5713 % We take care not to fully expand the title, since it may contain
5716 % Use \turnoffactive so that punctuation chars such as underscore
5717 % and backslash work in node names.
5724 \edef\writexrdef##1##2{%
5725 \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
5726 ##1}{##2}}% these are parameters of \writexrdef
5728 \toks0 = \expandafter{\thissection}%
5729 \immediate \writexrdef{title}{\the\toks0 }%
5730 \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
5731 \writexrdef{pg}{\folio}% will be written later, during \shipout
5736 % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
5737 % the node name, #2 the name of the Info cross-reference, #3 the printed
5738 % node name, #4 the name of the Info file, #5 the name of the printed
5739 % manual. All but the node name can be omitted.
5741 \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
5742 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
5743 \def\ref#1{\xrefX[#1,,,,,,,]}
5744 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
5746 \def\printedmanual{\ignorespaces #5}%
5747 \def\printedrefname{\ignorespaces #3}%
5748 \setbox1=\hbox{\printedmanual\unskip}%
5749 \setbox0=\hbox{\printedrefname\unskip}%
5751 % No printed node name was explicitly given.
5752 \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
5753 % Use the node name inside the square brackets.
5754 \def\printedrefname{\ignorespaces #1}%
5756 % Use the actual chapter/section title appear inside
5757 % the square brackets. Use the real section title if we have it.
5759 % It is in another manual, so we don't have it.
5760 \def\printedrefname{\ignorespaces #1}%
5763 % We know the real title if we have the xref values.
5764 \def\printedrefname{\refx{#1-title}{}}%
5766 % Otherwise just copy the Info node name.
5767 \def\printedrefname{\ignorespaces #1}%
5773 % Make link in pdf output.
5778 {\turnoffactive \otherbackslash
5779 \ifnum\filenamelength>0
5780 \startlink attr{/Border [0 0 0]}%
5781 goto file{\the\filename.pdf} name{#1}%
5783 \startlink attr{/Border [0 0 0]}%
5784 goto name{\pdfmkpgn{#1}}%
5790 % Float references are printed completely differently: "Figure 1.2"
5791 % instead of "[somenode], p.3". We distinguish them by the
5792 % LABEL-title being set to a magic string.
5793 \expandafter\ifx \csname X#1-title\endcsname \floatmagic
5794 % If the user specified the print name (third arg) to the ref,
5795 % print it instead of our usual "Figure 1.2".
5802 % if the user also gave the printed manual name (fifth arg), append
5805 \space \putwordin{} \cite{\printedmanual}%
5809 % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
5810 % insert empty discretionaries after hyphens, which means that it will
5811 % not find a line break at a hyphen in a node names. Since some manuals
5812 % are best written with fairly long node names, containing hyphens, this
5813 % is a loss. Therefore, we give the text of the node name again, so it
5814 % is as if TeX is seeing it for the first time.
5816 \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
5818 % _ (for example) has to be the character _ for the purposes of the
5819 % control sequence corresponding to the node, but it has to expand
5820 % into the usual \leavevmode...\vrule stuff for purposes of
5821 % printing. So we \turnoffactive for the \refx-snt, back on for the
5822 % printing, back off for the \refx-pg.
5823 {\turnoffactive \otherbackslash
5824 % Only output a following space if the -snt ref is nonempty; for
5825 % @unnumbered and @anchor, it won't be.
5826 \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
5827 \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
5829 % output the `[mynode]' via a macro.
5830 \xrefprintnodename\printedrefname
5832 % But we always want a comma and a space:
5835 % output the `page 3'.
5836 \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
5842 % This macro is called from \xrefX for the `[nodename]' part of xref
5843 % output. It's a separate macro only so it can be changed more easily,
5844 % since square brackets don't work well in some documents. Particularly
5845 % one that Bob is working on :).
5847 \def\xrefprintnodename#1{[#1]}
5849 % Things referred to by \setref.
5855 \putwordChapter@tie \the\chapno
5856 \else \ifnum\subsecno=0
5857 \putwordSection@tie \the\chapno.\the\secno
5858 \else \ifnum\subsubsecno=0
5859 \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
5861 \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
5866 \putwordAppendix@tie @char\the\appendixno{}%
5867 \else \ifnum\subsecno=0
5868 \putwordSection@tie @char\the\appendixno.\the\secno
5869 \else \ifnum\subsubsecno=0
5870 \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
5873 @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
5877 % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
5878 % If its value is nonempty, SUFFIX is output afterward.
5884 \expandafter\global\expandafter\let\expandafter\thisrefX
5885 \csname X#1\endcsname
5888 % If not defined, say something at least.
5889 \angleleft un\-de\-fined\angleright
5892 \message{\linenumber Undefined cross reference `#1'.}%
5895 \global\warnedxrefstrue
5896 \message{Cross reference values unknown; you must run TeX again.}%
5901 % It's defined, so just use it.
5904 #2% Output the suffix in any case.
5907 % This is the macro invoked by entries in the aux file.
5909 \def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
5911 % Read the last existing aux file, if any. No error if none exists.
5914 \def\readauxfile{\begingroup
5915 \catcode`\^^@=\other
5916 \catcode`\^^A=\other
5917 \catcode`\^^B=\other
5918 \catcode`\^^C=\other
5919 \catcode`\^^D=\other
5920 \catcode`\^^E=\other
5921 \catcode`\^^F=\other
5922 \catcode`\^^G=\other
5923 \catcode`\^^H=\other
5924 \catcode`\^^K=\other
5925 \catcode`\^^L=\other
5926 \catcode`\^^N=\other
5927 \catcode`\^^P=\other
5928 \catcode`\^^Q=\other
5929 \catcode`\^^R=\other
5930 \catcode`\^^S=\other
5931 \catcode`\^^T=\other
5932 \catcode`\^^U=\other
5933 \catcode`\^^V=\other
5934 \catcode`\^^W=\other
5935 \catcode`\^^X=\other
5936 \catcode`\^^Z=\other
5937 \catcode`\^^[=\other
5938 \catcode`\^^\=\other
5939 \catcode`\^^]=\other
5940 \catcode`\^^^=\other
5941 \catcode`\^^_=\other
5942 % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
5943 % in xref tags, i.e., node names. But since ^^e4 notation isn't
5944 % supported in the main text, it doesn't seem desirable. Furthermore,
5945 % that is not enough: for node names that actually contain a ^
5946 % character, we would end up writing a line like this: 'xrdef {'hat
5947 % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
5948 % argument, and \hat is not an expandable control sequence. It could
5949 % all be worked out, but why? Either we support ^^ or we don't.
5951 % The other change necessary for this was to define \auxhat:
5952 % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
5953 % and then to call \auxhat in \setq.
5957 % Special characters. Should be turned off anyway, but...
5970 \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
5972 % Make the characters 128-255 be printing characters
5976 \catcode\count 1=\other
5977 \advance\count 1 by 1
5978 \ifnum \count 1<256 \loop \fi
5982 % Turn off \ as an escape so we do not lose on
5983 % entries which were dumped with control sequences in their names.
5984 % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
5985 % Reference to such entries still does not work the way one would wish,
5986 % but at least they do not bomb out when the aux file is read in.
5989 % @ is our escape character in .aux files.
5994 \openin 1 \jobname.aux
5998 \global\havexrefstrue
6000 % Open the new aux file right away (otherwise the \immediate's in
6001 % \setref cause spurious terminal output). TeX will close it
6002 % automatically at exit.
6003 \immediate\openout\auxfile=\jobname.aux
6007 \message{insertions,}
6008 % including footnotes.
6010 \newcount \footnoteno
6012 % The trailing space in the following definition for supereject is
6013 % vital for proper filling; pages come out unaligned when you do a
6014 % pagealignmacro call if that space before the closing brace is
6015 % removed. (Generally, numeric constants should always be followed by a
6016 % space to prevent strange expansion errors.)
6017 \def\supereject{\par\penalty -20000\footnoteno =0 }
6019 % @footnotestyle is meaningful for info output only.
6020 \let\footnotestyle=\comment
6024 % Auto-number footnotes. Otherwise like plain.
6026 \let\indent=\ptexindent
6027 \let\noindent=\ptexnoindent
6028 \global\advance\footnoteno by \@ne
6029 \edef\thisfootno{$^{\the\footnoteno}$}%
6031 % In case the footnote comes at the end of a sentence, preserve the
6032 % extra spacing after we do the footnote number.
6034 \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
6036 % Remove inadvertent blank space before typesetting the footnote number.
6042 % Don't bother with the trickery in plain.tex to not require the
6043 % footnote text as a parameter. Our footnotes don't need to be so general.
6045 % Oh yes, they do; otherwise, @ifset (and anything else that uses
6046 % \parseargline) fails inside footnotes because the tokens are fixed when
6047 % the footnote is read. --karl, 16nov96.
6050 \insert\footins\bgroup
6051 % We want to typeset this text as a normal paragraph, even if the
6052 % footnote reference occurs in (for example) a display environment.
6053 % So reset some parameters.
6055 \interlinepenalty\interfootnotelinepenalty
6056 \splittopskip\ht\strutbox % top baseline for broken footnotes
6057 \splitmaxdepth\dp\strutbox
6058 \floatingpenalty\@MM
6063 \parindent\defaultparindent
6067 % Because we use hanging indentation in footnotes, a @noindent appears
6068 % to exdent this text, so make it be a no-op. makeinfo does not use
6069 % hanging indentation so @noindent can still be needed within footnote
6070 % text after an @example or the like (not that this is good style).
6071 \let\noindent = \relax
6073 % Hang the footnote text off the number. Use \everypar in case the
6074 % footnote extends for more than one paragraph.
6075 \everypar = {\hang}%
6076 \textindent{\thisfootno}%
6078 % Don't crash into the line above the footnote text. Since this
6079 % expands into a box, it must come within the paragraph, lest it
6080 % provide a place where TeX can split the footnote.
6082 \futurelet\next\fo@t
6084 }%end \catcode `\@=11
6086 % In case a @footnote appears in a vbox, save the footnote text and create
6087 % the real \insert just after the vbox finished. Otherwise, the insertion
6089 % Similarily, if a @footnote appears inside an alignment, save the footnote
6090 % text to a box and make the \insert when a row of the table is finished.
6091 % And the same can be done for other insert classes. --kasal, 16nov03.
6093 % Replace the \insert primitive by a cheating macro.
6094 % Deeper inside, just make sure that the saved insertions are not spilled
6097 \def\startsavinginserts{%
6098 \ifx \insert\ptexinsert
6099 \let\insert\saveinsert
6101 \let\checkinserts\relax
6105 % This \insert replacements works for both \insert\footins{xx} and
6106 % \insert\footins\bgroup xx\egroup, but it doesn't work for \insert27{xx}.
6109 \edef\next{\noexpand\savetobox \makeSAVEname#1}%
6110 \afterassignment\next
6111 % swallow the left brace
6114 \def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
6115 \def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
6117 \def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
6119 \def\placesaveins#1{%
6120 \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
6124 % eat @SAVE -- beware, all of them have catcode \other:
6126 \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-)
6127 \gdef\gobblesave @SAVE{}
6131 \def\newsaveins #1{%
6132 \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
6135 \def\newsaveinsX #1{%
6136 \csname newbox\endcsname #1% \newbox cannot be pronounced, as it is outer
6137 \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
6142 \let\checkinserts\empty
6147 % @image. We use the macros from epsf.tex to support this.
6148 % If epsf.tex is not installed and @image is used, we complain.
6150 % Check for and read epsf.tex up front. If we read it only at @image
6151 % time, we might be inside a group, and then its definitions would get
6152 % undone and the next image would fail.
6153 \openin 1 = epsf.tex
6156 % Do not bother showing banner with epsf.tex v2.7k (available in
6157 % doc/epsf.tex and on ctan).
6158 \def\epsfannounce{\toks0 = }%
6162 % We will only complain once about lack of epsf.tex.
6163 \newif\ifwarnednoepsf
6164 \newhelp\noepsfhelp{epsf.tex must be installed for images to
6165 work. It is also included in the Texinfo distribution, or you can get
6166 it from ftp://tug.org/tex/epsf.tex.}
6169 \ifx\epsfbox\undefined
6170 \ifwarnednoepsf \else
6171 \errhelp = \noepsfhelp
6172 \errmessage{epsf.tex not found, images will be ignored}%
6173 \global\warnednoepsftrue
6176 \imagexxx #1,,,,,\finish
6180 % Arguments to @image:
6181 % #1 is (mandatory) image filename; we tack on .eps extension.
6182 % #2 is (optional) width, #3 is (optional) height.
6183 % #4 is (ignored optional) html alt text.
6184 % #5 is (ignored optional) extension.
6185 % #6 is just the usual extra ignored arg for parsing this stuff.
6187 \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
6188 \catcode`\^^M = 5 % in case we're inside an example
6189 \normalturnoffactive % allow _ et al. in names
6190 % If the image is by itself, center it.
6194 % Usually we'll have text after the image which will insert
6195 % \parskip glue, so insert it here too to equalize the space
6197 \nobreak\vskip\parskip
6204 \dopdfimage{#1}{#2}{#3}%
6206 % \epsfbox itself resets \epsf?size at each figure.
6207 \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
6208 \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
6212 \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
6216 % @float FLOATTYPE,LOC ... @end float for displayed figures, tables, etc.
6217 % We don't actually implement floating yet, we just plop the float "here".
6218 % But it seemed the best name for the future.
6220 \def\float{\parsearg\parsefloat}
6221 \def\parsefloat#1{\dofloat #1,,,\finish}
6223 % #1 is the optional FLOATTYPE, the text label for this float, typically
6224 % "Figure", "Table", "Example", etc. Can't contain commas. If omitted,
6225 % this float will not be numbered and cannot be referred to.
6227 % #2 is the optional xref label. Also must be present for the float to
6230 % #3 is the optional positioning argument; for now, it is ignored. It
6231 % will somehow specify the positions allowed to float to (here, top, bottom).
6233 % We keep a separate counter for each FLOATTYPE, which we reset at each
6234 % chapter-level command.
6235 \let\resetallfloatnos=\empty
6237 \def\dofloat#1,#2,#3,#4\finish{\vtop\bgroup
6239 \def\floatlabel{#2}%
6240 \def\floatloc{#3}% we do nothing with this yet.
6241 % xx should we indent the whole thing? center it?
6243 % allow @[short]caption now.
6244 \let\thiscaption=\empty
6245 \def\caption##1{\def\thiscaption{##1}}%
6247 \let\thisshortcaption=\empty
6248 \def\shortcaption##1{\def\thisshortcaption{##1}}%
6250 \ifx\floattype\empty \else
6251 % For now, assume the FLOATTYPE is entirely letters, so we just use it
6252 % in a control sequence name literally. We want each FLOATTYPE to be
6253 % numbered separately (Figure 1, Table 1, Figure 2, ...).
6254 \expandafter\let\expandafter\floatno\csname\floattype floatno\endcsname
6256 % Haven't seen this figure type before, so need to define
6257 % the counter for it, and then redefine \floatno.
6258 \expandafter\innernewcount\csname\floattype floatno\endcsname
6259 \expandafter\let\expandafter\floatno\csname\floattype floatno\endcsname
6261 % Remember to reset this floatno at the next chap.
6262 \toks0 = \expandafter{\resetallfloatnos}%
6263 \xdef\resetallfloatnos{\the\toks0 \makecsname{\floattype floatno}=0 }%
6265 \global\advance\floatno by 1
6267 \ifx\floatlabel\empty \else
6269 % This magic value for \thissection is output by \setref as the
6270 % XREFLABEL-title value. \xrefX uses it to distinguish float
6271 % labels (which have a completely different output format) from
6272 % nodes and xref labels.
6274 \let\thissection=\floatmagic
6275 \setref{\floatlabel}{Yfloat}%
6281 % we have four possibilities:
6282 % @float Foo & @caption{Cap}: Foo 1.1: Cap
6283 % @float Foo & no caption: Foo 1.1
6284 % @float & @caption{cap}: Cap
6285 % @float & no caption:
6287 \let\printedsomething = \empty
6289 \ifx\floattype\empty \else
6290 \vskip.5\parskip % space above caption
6292 % Print the float number preceded by the chapter-level number
6293 % (empty in the case of unnumbered). Although there are other
6294 % styles of float numbering, we hardwire this one.
6295 \floattype\space\chaplevelprefix\the\floatno
6296 \let\printedsomething = t%
6299 \ifx\thiscaption\empty \else
6300 \ifx\printedsomething\empty
6301 \vskip.5\parskip % space above caption
6303 :\space % had a number, so print a colon.
6306 % Print caption text.
6308 \let\printedsomething = t%
6311 % Space below caption, if we printed anything.
6312 \ifx\printedsomething\empty \else \vskip\parskip \fi
6314 \egroup % end of \vtop
6318 % \setref calls this to get the XREFLABEL-snt value. We want an @xref
6319 % to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we
6320 % first read the @float command.
6322 \def\Yfloat{\floattype @tie{}\chaplevelprefix\the\floatno}%
6324 \def\floatmagic{!!float!!}
6326 % @listoffloats FLOATTYPE - print a list of floats like a table of contents.
6327 \def\listoffloats{\parsearg\dolistoffloats}
6328 \def\dolistoffloats#1{%xx
6331 % Default definitions.
6332 \def\caption{\errmessage{@caption while not in @float environment}}
6333 \def\shortcaption{\errmessage{@shortcaption while not in @float environment}}
6336 \message{localization,}
6339 % @documentlanguage is usually given very early, just after
6340 % @setfilename. If done too late, it may not override everything
6341 % properly. Single argument is the language abbreviation.
6342 % It would be nice if we could set up a hyphenation file here.
6344 \defparsearg\documentlanguage{%
6345 \tex % read txi-??.tex file in plain TeX.
6346 % Read the file if it exists.
6347 \openin 1 txi-#1.tex
6349 \errhelp = \nolanghelp
6350 \errmessage{Cannot read language file txi-#1.tex}%
6353 \def\temp{\input txi-#1.tex }%
6358 \newhelp\nolanghelp{The given language definition file cannot be found or
6359 is empty. Maybe you need to install it? In the current directory
6360 should work if nowhere else does.}
6363 % @documentencoding should change something in TeX eventually, most
6364 % likely, but for now just recognize it.
6365 \let\documentencoding = \comment
6368 % Page size parameters.
6370 \newdimen\defaultparindent \defaultparindent = 15pt
6372 \chapheadingskip = 15pt plus 4pt minus 2pt
6373 \secheadingskip = 12pt plus 3pt minus 2pt
6374 \subsecheadingskip = 9pt plus 2pt minus 2pt
6376 % Prevent underfull vbox error messages.
6379 % Don't be so finicky about underfull hboxes, either.
6382 % Following George Bush, just get rid of widows and orphans.
6386 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
6387 % using an old version of TeX, don't do anything. We want the amount of
6388 % stretch added to depend on the line length, hence the dependence on
6389 % \hsize. We call this whenever the paper size is set.
6391 \def\setemergencystretch{%
6392 \ifx\emergencystretch\thisisundefined
6393 % Allow us to assign to \emergencystretch anyway.
6394 \def\emergencystretch{\dimen0}%
6396 \emergencystretch = .15\hsize
6400 % Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
6401 % 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
6402 % physical page width.
6404 % We also call \setleading{\textleading}, so the caller should define
6405 % \textleading. The caller should also set \parskip.
6407 \def\internalpagesizes#1#2#3#4#5#6#7#8{%
6410 \splittopskip = \topskip
6413 \advance\vsize by \topskip
6414 \outervsize = \vsize
6415 \advance\outervsize by 2\topandbottommargin
6416 \pageheight = \vsize
6419 \outerhsize = \hsize
6420 \advance\outerhsize by 0.5in
6423 \normaloffset = #4\relax
6424 \bindingoffset = #5\relax
6427 \pdfpageheight #7\relax
6428 \pdfpagewidth #8\relax
6431 \setleading{\textleading}
6433 \parindent = \defaultparindent
6434 \setemergencystretch
6437 % @letterpaper (the default).
6438 \def\letterpaper{{\globaldefs = 1
6439 \parskip = 3pt plus 2pt minus 1pt
6440 \textleading = 13.2pt
6442 % If page is nothing but text, make it come out even.
6443 \internalpagesizes{46\baselineskip}{6in}%
6445 {\bindingoffset}{36pt}%
6449 % Use @smallbook to reset parameters for 7x9.5 (or so) format.
6450 \def\smallbook{{\globaldefs = 1
6451 \parskip = 2pt plus 1pt
6454 \internalpagesizes{7.5in}{5in}%
6456 {\bindingoffset}{16pt}%
6459 \lispnarrowing = 0.3in
6462 \contentsrightmargin = 0pt
6463 \defbodyindent = .5cm
6466 % Use @afourpaper to print on European A4 paper.
6467 \def\afourpaper{{\globaldefs = 1
6468 \parskip = 3pt plus 2pt minus 1pt
6469 \textleading = 13.2pt
6471 % Double-side printing via postscript on Laserjet 4050
6472 % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
6473 % To change the settings for a different printer or situation, adjust
6474 % \normaloffset until the front-side and back-side texts align. Then
6475 % do the same for \bindingoffset. You can set these for testing in
6476 % your texinfo source file like this:
6478 % \global\normaloffset = -6mm
6479 % \global\bindingoffset = 10mm
6481 \internalpagesizes{51\baselineskip}{160mm}
6482 {\voffset}{\hoffset}%
6483 {\bindingoffset}{44pt}%
6488 \contentsrightmargin = 0pt
6489 \defbodyindent = 5mm
6492 % Use @afivepaper to print on European A5 paper.
6493 % From romildo@urano.iceb.ufop.br, 2 July 2000.
6494 % He also recommends making @example and @lisp be small.
6495 \def\afivepaper{{\globaldefs = 1
6496 \parskip = 2pt plus 1pt minus 0.1pt
6497 \textleading = 12.5pt
6499 \internalpagesizes{160mm}{120mm}%
6500 {\voffset}{\hoffset}%
6501 {\bindingoffset}{8pt}%
6504 \lispnarrowing = 0.2in
6507 \contentsrightmargin = 0pt
6508 \defbodyindent = 2mm
6512 % A specific text layout, 24x15cm overall, intended for A4 paper.
6513 \def\afourlatex{{\globaldefs = 1
6515 \internalpagesizes{237mm}{150mm}%
6517 {\bindingoffset}{7mm}%
6520 % Must explicitly reset to 0 because we call \afourpaper.
6524 % Use @afourwide to print on A4 paper in landscape format.
6525 \def\afourwide{{\globaldefs = 1
6527 \internalpagesizes{241mm}{165mm}%
6528 {\voffset}{-2.95mm}%
6529 {\bindingoffset}{7mm}%
6534 % @pagesizes TEXTHEIGHT[,TEXTWIDTH]
6535 % Perhaps we should allow setting the margins, \topskip, \parskip,
6536 % and/or leading, also. Or perhaps we should compute them somehow.
6538 \defparsearg\pagesizes{\pagesizesyyy #1,,\finish}
6539 \def\pagesizesyyy#1,#2,#3\finish{{%
6540 \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
6543 \parskip = 3pt plus 2pt minus 1pt
6544 \setleading{\textleading}%
6547 \advance\dimen0 by \voffset
6550 \advance\dimen2 by \normaloffset
6552 \internalpagesizes{#1}{\hsize}%
6553 {\voffset}{\normaloffset}%
6554 {\bindingoffset}{44pt}%
6558 % Set default to letter.
6563 \message{and turning on texinfo input format.}
6565 % Define macros to output various characters with catcode for normal text.
6575 \def\normaldoublequote{"}
6578 \def\normalunderscore{_}
6579 \def\normalverticalbar{|}
6581 \def\normalgreater{>}
6583 \def\normaldollar{$}%$ font-lock fix
6585 % This macro is used to make a character print one way in ttfont
6586 % where it can probably just be output, and another way in other fonts,
6587 % where something hairier probably needs to be done.
6589 % #1 is what to print if we are indeed using \tt; #2 is what to print
6590 % otherwise. Since all the Computer Modern typewriter fonts have zero
6591 % interword stretch (and shrink), and it is reasonable to expect all
6592 % typewriter fonts to have this, we can check that font parameter.
6594 \def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
6596 % Same as above, but check for italic font. Actually this also catches
6597 % non-italic slanted fonts since it is impossible to distinguish them from
6598 % italic fonts. But since this is only used by $ and it uses \sl anyway
6599 % this is not a problem.
6600 \def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
6602 % Turn off all special characters except @
6603 % (and those which the user can use as if they were ordinary).
6604 % Most of these we simply print from the \tt font, but for some, we can
6605 % use math or other variants that look better in normal text.
6608 \def\activedoublequote{{\tt\char34}}
6609 \let"=\activedoublequote
6611 \def~{{\tt\char126}}
6617 \def_{\ifusingtt\normalunderscore\_}
6618 % Subroutine for the previous macro.
6619 \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
6622 \def|{{\tt\char124}}
6630 \def+{{\tt \char 43}}
6632 \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
6634 % If a .fmt file is being used, characters that might appear in a file
6635 % name cannot be active until we have parsed the command line.
6636 % So turn them off again, and have \everyjob (or @setfilename) turn them on.
6637 % \otherifyactive is called near the end of this file.
6638 \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
6642 % \rawbackslashxx outputs one backslash character in current font,
6644 \global\chardef\rawbackslashxx=`\\
6646 % \rawbackslash defines an active \ to do \rawbackslashxx.
6647 % \otherbackslash defines an active \ to be a literal `\' character with
6649 {\catcode`\\=\active
6650 @gdef@rawbackslash{@let\=@rawbackslashxx}
6651 @gdef@otherbackslash{@let\=@realbackslash}
6654 % \realbackslash is an actual character `\' with catcode other.
6655 {\catcode`\\=\other @gdef@realbackslash{\}}
6657 % \normalbackslash outputs one backslash in fixed width font.
6658 \def\normalbackslash{{\tt\rawbackslashxx}}
6662 % Used sometimes to turn off (effectively) the active characters
6663 % even after parsing them.
6664 @def@turnoffactive{%
6665 @let"=@normaldoublequote
6666 @let\=@realbackslash
6669 @let_=@normalunderscore
6670 @let|=@normalverticalbar
6672 @let>=@normalgreater
6674 @let$=@normaldollar %$ font-lock fix
6678 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
6679 % the literal character `\'. (Thus, \ is not expandable when this is in
6682 @def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
6684 % Make _ and + \other characters, temporarily.
6685 % This is canceled by @fixbackslash.
6688 % If a .fmt file is being used, we don't want the `\input texinfo' to show up.
6689 % That is what \eatinput is for; after that, the `\' should revert to printing
6692 @gdef@eatinput input texinfo{@fixbackslash}
6693 @global@let\ = @eatinput
6695 % On the other hand, perhaps the file did not have a `\input texinfo'. Then
6696 % the first `\{ in the file would cause an error. This macro tries to fix
6697 % that, assuming it is called before the first `\' could plausibly occur.
6698 % Also back turn on active characters that might appear in the input
6699 % file name, in case not using a pre-dumped format.
6701 @gdef@fixbackslash{%
6702 @ifx\@eatinput @let\ = @normalbackslash @fi
6707 % Say @foo, not \foo, in error messages.
6710 % These look ok in all fonts, so just make them not special.
6711 @catcode`@& = @other
6712 @catcode`@# = @other
6713 @catcode`@% = @other
6715 @c Set initial fonts.
6721 @c eval: (add-hook 'write-file-hooks 'time-stamp)
6722 @c page-delimiter: "^\\\\message"
6723 @c time-stamp-start: "def\\\\texinfoversion{"
6724 @c time-stamp-format: "%:y-%02m-%02d.%02H"
6725 @c time-stamp-end: "}"
6731 arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115