Merge branch 'lilypond/translation' into staging

[lilypond.git] / Documentation / notation / simultaneous.itely

@c -*- coding: utf-8; mode: texinfo; -*-
@ignore
    Translation of GIT committish: FILL-IN-HEAD-COMMITTISH

    When revising a translation, copy the HEAD committish of the
    version that you are working on.  For details, see the Contributors'
    Guide, node Updating translation committishes..
@end ignore

@c \version "2.14.0"


@node Simultaneous notes
@section Simultaneous notes

@lilypondfile[quote]{simultaneous-headword.ly}

Polyphony in music refers to having more than one voice occurring
in a piece of music.  Polyphony in LilyPond refers to having more
than one voice on the same staff.

@menu
* Single voice::
* Multiple voices::
@end menu


@node Single voice
@subsection Single voice

This section discusses simultaneous notes inside the same voice.

@menu
* Chorded notes::
* Chord repetition::
* Simultaneous expressions::
* Clusters::
@end menu


@node Chorded notes
@unnumberedsubsubsec Chorded notes

@cindex chords
@cindex brackets, angle

@funindex <
@funindex >
@funindex <...>

A chord is formed by enclosing a set of pitches between @code{<}
and @code{>}.  A chord may be followed by a duration just like simple
notes.

@lilypond[verbatim,quote,relative=2]
<a c e>1 <a c e>2 <f a c e>4 <a c>8. <g c e>16
@end lilypond

Chords may also be followed by articulations, again just like simple
notes.

@lilypond[verbatim,quote,relative=2]
<a c e>1\fermata <a c e>2-> <f a c e>4\prall <a c>8.^| <g c e>16-.
@end lilypond

The notes within the chord themselves can also be followed by articulation
and ornamentation.

@lilypond[verbatim,quote,relative=2]
<a c\prall e>1 <a-> c-^ e>2 <f-. a c-. e-.>4 <a-+ c-->8. <g\fermata c e\turn>16
@end lilypond

However some notation, such as dynamics, hairpins and slurs must be
attached to the chord, rather than notes within the chord, otherwise
they will not print.

@lilypond[verbatim,quote,relative=2]
<a\f c( e>1 <a c) e>\f <a\< c e>( <a\! c e>) <a c e>\< <a c e> <a c e>\!
@end lilypond

@cindex relative pitch, chords
@cindex chords, relative pitch

Relative mode can be used for pitches in chords.  The first note of
each chord is always relative to the first note of the chord that
came before it, or in the case where no preceding chord exists, the
pitch of the last note that came before the chord.  All remaining notes
in the chord are relative to the note that came before it
@emph{within the same chord}.

@lilypond[verbatim,quote,relative=2]
<a c e>1 <f a c> <a c e> <f' a c> <b, e b,>
@end lilypond

For more information about chords, see @ref{Chord notation}.

@seealso
Music Glossary:
@rglos{chord}.

Learning Manual:
@rlearning{Combining notes into chords}.

Notation Reference:
@ref{Chord notation},
@ref{Articulations and ornamentations},
@ref{Relative octave entry},
@ref{Multiple voices}.

Snippets:
@rlsr{Simultaneous notes}.

@knownissues
Chords containing more than two pitches within a staff space,
such as @samp{<e f! fis!>}, create overlapping noteheads.
Depending on the situation, better representations might involve

@itemize

@item
temporary use of @ref{Multiple voices},
@samp{<< f! \\ <e fis!> >>},

@item
enharmonic transcription of one or more pitches,
@samp{<e f ges>}, or

@item
@ref{Clusters}.

@end itemize

@node Chord repetition
@unnumberedsubsubsec Chord repetition

In order to save typing, a shortcut can be used to repeat the preceding
chord.  The chord repetition symbol is @code{q}:

@lilypond[verbatim,quote,relative=2]
<a c e>1 q <f a c>2 q
@end lilypond

As with regular chords, the chord repetition symbol can be used with
durations, articulations, markups, slurs, beams, etc. as only the
pitches of the previous chord are duplicated.

@lilypond[verbatim,quote,relative=2]
<a c e>1\p^"text" q2\<( q8)[-| q8.]\! q16-1-2-3 q8\prall
@end lilypond

The chord repetition symbol always remembers the last instance of
a chord so it is possible to repeat the most recent chord even if
other non-chorded notes or rests have been added since.

@lilypond[verbatim,quote,relative=2]
<a c e>1 c4 q2 r8 q8
@end lilypond

However, the chord repetition symbol does not retain any dynamics,
articulation or ornamentation within, or attached to the previous chord.

@lilypond[verbatim,quote,relative=2]
<a-. c\prall e>1\sfz c4 q2 r8 q8
@end lilypond

@seealso
Notation Reference:
@ref{Chord notation},
@ref{Articulations and ornamentations}.

Installed Files:
@file{ly/chord-repetition-init.ly}.


@node Simultaneous expressions
@unnumberedsubsubsec Simultaneous expressions

One or more music expressions enclosed in double angle brackets are
taken to be simultaneous.  If the first expression begins with a
single note or if the whole simultaneous expression appears
explicitly within a single voice, the whole expression is placed on
a single staff; otherwise the elements of the simultaneous
expression are placed on separate staves.

The following examples show simultaneous expressions on one staff:

@lilypond[quote,verbatim,relative=2]
\new Voice {  % explicit single voice
  << { a4 b g2 } { d4 g c,2 } >>
}
@end lilypond

@lilypond[quote,verbatim,relative=2]
% single first note
a << { a4 b g } { d4 g c, } >>
@end lilypond

This can be useful if the simultaneous sections have identical
rhythms, but attempts to attach notes with different durations
to the same stem will cause errors.

The following example shows how simultaneous expressions can
generate multiple staves implicitly:

@lilypond[quote,verbatim,relative=2]
% no single first note
<< { a4 b g2 } { d4 g2 c,4 } >>
@end lilypond

Here different rhythms cause no problems.

@cindex collisions, clashing note columns
@cindex collisions, ignoring

@knownissues
If notes from two or more voices, with stems in the same direction, are
placed at the same position on the staff and have no shift (or have the
same shift specified), the message:

@example
warning: ignoring too many clashing note columns
@end example

will appear during compilation.  This message can be suppressed by:

@example
\override NoteColumn #'ignore-collision = ##t
@end example

However, this not only suppresses the warning but will prevent any
collision resolution whatsover and may have other unintended effects
(also see @emph{Known Issues} in @ref{Collision resolution}).


@node Clusters
@unnumberedsubsubsec Clusters

@cindex cluster
@cindex note cluster

@funindex \makeClusters
@funindex makeClusters

A cluster indicates a continuous range of pitches to be played.
They can be denoted as the envelope of a set of notes.  They are
entered by applying the function @code{\makeClusters} to a sequence
of chords, e.g.,

@lilypond[quote,relative=2,verbatim]
\makeClusters { <g b>2 <c g'> }
@end lilypond

Ordinary notes and clusters can be put together in the same staff,
even simultaneously.  In such a case no attempt is made to
automatically avoid collisions between ordinary notes and clusters.


@seealso
Music Glossary:
@rglos{cluster}.

Snippets:
@rlsr{Simultaneous notes}.

Internals Reference:
@rinternals{ClusterSpanner},
@rinternals{ClusterSpannerBeacon},
@rinternals{Cluster_spanner_engraver}.


@knownissues

Clusters look good only if they span at least two chords; otherwise
they appear too narrow.

Clusters do not have a stem and cannot indicate durations by
themselves, but the length of the printed cluster is determined by
the durations of the defining chords.  Separate clusters need a
separating rest between them.

Clusters do not produce MIDI output.

@node Multiple voices
@subsection Multiple voices

This section discusses simultaneous notes in multiple voices or
multiple staves.

@menu
* Single-staff polyphony::
* Voice styles::
* Collision resolution::
* Automatic part combining::
* Writing music in parallel::
@end menu


@node Single-staff polyphony
@unnumberedsubsubsec Single-staff polyphony

@cindex single-staff polyphony
@cindex polyphony, single-staff
@cindex voice
@cindex lyrics assigned to one voice

@funindex \voiceOne
@funindex voiceOne
@funindex \voiceOne ... \voiceFour
@funindex Voice
@funindex \oneVoice
@funindex oneVoice

@strong{@i{Explicitly instantiating voices}}

The basic structure needed to achieve multiple independent
voices in a single staff is illustrated in the following example:

@lilypond[quote,relative=3,verbatim]
\new Staff <<
  \new Voice = "first"
    { \voiceOne r8 r16 g e8. f16 g8[ c,] f e16 d }
  \new Voice= "second"
    { \voiceTwo d16 c d8~ d16 b c8~ c16 b c8~ c16 b8. }
>>
@end lilypond

@noindent
Here, voices are instantiated explicitly and are given names.  The
@code{\voiceOne} @dots{} @code{\voiceFour} commands set up the voices
so that first and third voices get stems up, second and fourth
voices get stems down, third and fourth voice note heads are
horizontally shifted, and rests in the respective voices are
automatically moved to avoid collisions.  The @code{\oneVoice}
command returns all the voice settings to the neutral default
directions.

@strong{@i{Temporary polyphonic passages}}

A temporary polyphonic passage can be created with the following
construct:

@example
<< @{ \voiceOne ... @}
  \new Voice @{ \voiceTwo ... @}
>> \oneVoice
@end example

@noindent
Here, the first expression within a temporary polyphonic passage is
placed into the @code{Voice} context which was in use immediately
before the polyphonic passage, and that same @code{Voice} context
continues after the temporary section.  Other expressions within
the angle brackets are assigned to distinct temporary voices.
This allows lyrics to be assigned to one continuing voice before,
during and after a polyphonic section:

@lilypond[quote, verbatim, relative=2]
<<
  \new Voice = "melody" {
    a4
    <<
      {
        \voiceOne
        g f
      }
      \new Voice {
        \voiceTwo
        d2
      }
    >>
    \oneVoice
    e4
  }
  \new Lyrics \lyricsto "melody" {
  This is my song.
  }
>>
@end lilypond

@noindent
Here, the @code{\voiceOne} and @code{\voiceTwo} commands are
required to define the settings of each voice.

@strong{@i{The double backslash construct}}

The @code{<< @{...@} \\ @{...@} >>} construct, where the two (or
more) expressions are separated by double backslashes, behaves
differently to the similar construct without the double backslashes:
@emph{all} the expressions within this construct are assigned
to new @code{Voice} contexts.  These new @code{Voice} contexts
are created implicitly and are given the fixed names @code{"1"},
@code{"2"}, etc.

The first example could be typeset as follows:

@lilypond[quote,relative=3,verbatim]
<<
  { r8 r16 g e8. f16 g8[ c,] f e16 d }
  \\
  { d16 c d8~ d16 b c8~ c16 b c8~ c16 b8. }
>>
@end lilypond

This syntax can be used where it does not matter that temporary
voices are created and then discarded.  These implicitly created
voices are given the settings equivalent to the effect of the
@code{\voiceOne} @dots{} @code{\voiceFour} commands, in the order in
which they appear in the code.

In the following example, the intermediate voice has stems up,
therefore we enter it in the third place, so it becomes voice
three, which has the stems up as desired.  Spacer rests are
used to avoid printing doubled rests.

@lilypond[quote,relative=3,verbatim]
<<
  { r8 g g  g g f16 ees f8 d }
  \\
  { ees,8 r ees r d r d r }
  \\
  { d'8 s c s bes s a s }
>>
@end lilypond

In all but the simplest works it is advisable to create explicit
@code{Voice} contexts as explained in @rlearning{Contexts and engravers} and
@rlearning{Explicitly instantiating voices}.

@strong{@i{Voice order}}

When entering multiple voices in the input file, use the following
order:

@example
Voice 1: highest
Voice 2: lowest
Voice 3: second highest
Voice 4: second lowest
Voice 5: third highest
Voice 6: third lowest
etc.
@end example

Though this may seem counterintuitive, it simplifies the automatic
layout process.  Note that the odd-numbered voices are given
upstems, and the even-numbered voices are given downstems:

@lilypond[quote,verbatim]
\new Staff <<
  \time 2/4
  { f''2 }  % 1: highest
  \\
  { c'2  }  % 2: lowest
  \\
  { d''2 }  % 3: second-highest
  \\
  { e'2  }  % 4: second-lowest
  \\
  { b'2  }  % 5: third-highest
  \\
  { g'2  }  % 6: third-lowest
>>
@end lilypond

@strong{@i{Identical rhythms}}

In the special case that we want to typeset parallel pieces of music
that have the same rhythm, we can combine them into a single
@code{Voice} context, thus forming chords.  To achieve this, enclose
them in a simple simultaneous music construct within an explicit voice:

@lilypond[quote,relative=2,verbatim]
\new Voice <<
  { e4 f8 d e16 f g8 d4 }
  { c4 d8 b c16 d e8 b4 }
>>
@end lilypond

This method leads to strange beamings and warnings if the pieces of
music do not have the same rhythm.


@predefined
@code{\voiceOne},
@code{\voiceTwo},
@code{\voiceThree},
@code{\voiceFour},
@code{\oneVoice}.
@endpredefined


@seealso
Learning Manual:
@rlearning{Voices contain music},
@rlearning{Explicitly instantiating voices}.

Notation Reference:
@ref{Percussion staves},
@ref{Invisible rests},
@ref{Stems}.

Snippets:
@rlsr{Simultaneous notes}.


@node Voice styles
@unnumberedsubsubsec Voice styles

@cindex voice styles
@cindex styles, voice
@cindex coloring voices
@funindex \voiceOneStyle
@funindex \voiceTwoStyle
@funindex \voiceThreeStyle
@funindex \voiceFourStyle
@funindex \voiceNeutralStyle

Voices may be given distinct colors and shapes, allowing them to be
easily identified:

@lilypond[quote,relative=2,verbatim]
<<
  { \voiceOneStyle d4 c2 b4 }
  \\
  { \voiceTwoStyle e,2 e }
  \\
  { \voiceThreeStyle b2. c4 }
  \\
  { \voiceFourStyle g'2 g }
>>
@end lilypond

The @code{\voiceNeutralStyle} command is used to revert to the
standard presentation.


@predefined
@code{\voiceOneStyle},
@code{\voiceTwoStyle},
@code{\voiceThreeStyle},
@code{\voiceFourStyle},
@code{\voiceNeutralStyle}.
@endpredefined


@seealso
Learning Manual:
@rlearning{I'm hearing Voices},
@rlearning{Other sources of information}.

Snippets:
@rlsr{Simultaneous notes}.


@node Collision resolution
@unnumberedsubsubsec Collision resolution

@cindex merging notes
@cindex note collisions
@cindex collisions
@cindex shift note
@cindex multiple voices
@cindex voices, multiple
@cindex polyphonic music
@cindex shifting voices
@cindex voices, multiple
@cindex shift rest, automatic
@funindex \shiftOn
@funindex shiftOn
@funindex \shiftOnn
@funindex shiftOnn
@funindex \shiftOnnn
@funindex shiftOnnn
@funindex \shiftOff
@funindex shiftOff
@funindex \mergeDifferentlyDottedOn
@funindex mergeDifferentlyDottedOn
@funindex \mergeDifferentlyDottedOff
@funindex mergeDifferentlyDottedOff
@funindex \mergeDifferentlyHeadedOn
@funindex mergeDifferentlyHeadedOn
@funindex \mergeDifferentlyHeadedOff
@funindex mergeDifferentlyHeadedOff

The note heads of notes in different voices with the same pitch,
same note head and opposite stem direction are automatically
merged, but notes with different note heads or the same stem
direction are not.  Rests opposite a stem in a different voice
are shifted vertically.  The following example shows three
different circumstances, on beats 1 and 3 in bar 1 and beat 1
in bar 2, where the automatic merging fails.

@lilypond[quote,verbatim,relative=2]
<<
  {
    c8 d e d c d c4
    g'2 fis
  } \\ {
    c2 c8. b16 c4
    e,2 r
  } \\ {
    \oneVoice
    s1
    e8 a b c d2
  }
>>
@end lilypond

Notes with different note heads may be merged, with the
exception of half-note heads and quarter-note heads, as shown
below.  Here the note heads on beat 1 of bar 1 are now merged:

@lilypond[quote,verbatim,relative=2]
<<
  {
    \mergeDifferentlyHeadedOn
    c8 d e d c d c4
    g'2 fis
  } \\ {
    c2 c8. b16 c4
    e,2 r
  } \\ {
    \oneVoice
    s1
    e8 a b c d2
  }
>>
@end lilypond

Note heads with different dots as shown in beat 3 of bar 1 may be
also be merged:

@lilypond[quote,relative=2,verbatim]
<<
  {
    \mergeDifferentlyHeadedOn
    \mergeDifferentlyDottedOn
    c8 d e d c d c4
    g'2 fis
  } \\ {
    c2 c8. b16 c4
    e,2 r
  } \\ {
    \oneVoice
    s1
    e8 a b c d2
  }
>>
@end lilypond

The half note and eighth note at the start of the second measure
are incorrectly merged because the automatic merge cannot
successfully complete the merge when three or more notes line up in
the same note column, and in this case the merged note head is
incorrect.  To allow the merge to select the correct note head
a @code{\shift} must be applied to the note that should not be
merged.  Here, @code{\shiftOn} is applied to move the top
@notation{g} out of the column, and @code{\mergeDifferentlyHeadedOn}
then works properly.

@lilypond[quote,relative=2,verbatim]
<<
  {
    \mergeDifferentlyHeadedOn
    \mergeDifferentlyDottedOn
    c8 d e d c d c4
    \shiftOn
    g'2 fis
  } \\ {
    c2 c8. b16 c4
    e,2 r
  } \\ {
    \oneVoice
    s1
    e8 a b c d2
  }
>>
@end lilypond

The @code{\shiftOn} command allows (but does not force) the notes
in a voice to be shifted.  When @code{\shiftOn} is applied to a
voice, a note or chord in that voice is shifted only if its stem
would otherwise collide with a stem from another voice, and only
if the colliding stems point in the same direction.  The
@code{\shiftOff} command prevents this type of shifting from
occurring.

By default, the outer voices (normally voices one and two) have
@code{\shiftOff} specified, while the inner voices (three and
above) have @code{\shiftOn} specified.  When a shift is applied,
voices with upstems (odd-numbered voices) are shifted to the
right, and voices with downstems (even-numbered voices) are
shifted to the left.

Here is an example to help you visualize how an abbreviated
polyphonic expression would be expanded internally.

@warning{Note that with three or more voices, the vertical order
of voices in your input file should not be the same as the
vertical order of voices on the staff!}

@lilypond[quote,verbatim]
\new Staff \relative c'' {
  %% abbreviated entry
  <<
    { f2  }  % 1: highest
    \\
    { g,2 }  % 2: lowest
    \\
    { d'2 }  % 3: upper middle
    \\
    { b2  }  % 4: lower middle
  >>
  %% internal expansion of the above
  <<
    \new Voice = "1" { \voiceOne   \shiftOff f'2 }
    \new Voice = "2" { \voiceTwo   \shiftOff g,2 }
    \new Voice = "3" { \voiceThree \shiftOn  d'2 } % shifts right
    \new Voice = "4" { \voiceFour  \shiftOn  b2  } % shifts left
  >>
}
@end lilypond

Two additional commands, @code{\shiftOnn} and @code{\shiftOnnn}
provide further shift levels which may be specified temporarily to
resolve collisions in complex situations -- see
@rlearning{Real music example}.

Notes are only merged if they have opposing stem directions (as
they have, for example, in voices one and two by default or when
the stems are explicitly set in opposite directions).

@predefined
@code{\mergeDifferentlyDottedOn},
@code{\mergeDifferentlyDottedOff},
@code{\mergeDifferentlyHeadedOn},
@code{\mergeDifferentlyHeadedOff}.

@code{\shiftOn},
@code{\shiftOnn},
@code{\shiftOnnn},
@code{\shiftOff}.
@endpredefined

@snippets
@lilypondfile[verbatim,quote,texidoc,doctitle]
{additional-voices-to-avoid-collisions.ly}

@lilypondfile[verbatim,quote,texidoc,doctitle]
{forcing-horizontal-shift-of-notes.ly}

@seealso
Music Glossary:
@rglos{polyphony}.

Learning Manual:
@rlearning{Multiple notes at once},
@rlearning{Voices contain music},
@rlearning{Real music example}.

Snippets:
@rlsr{Simultaneous notes}.

Internals Reference:
@rinternals{NoteColumn},
@rinternals{NoteCollision},
@rinternals{RestCollision}.

@cindex collisions, ignoring

@knownissues
Using @code{\override NoteColumn #'ignore-collision = ##t} will cause
differently headed notes in different voices to merge incorrectly.

@lilypond[quote,relative=1,verbatim]
\mergeDifferentlyHeadedOn
<< { c16 a' b a } \\ { c,2 } >>
\override NoteColumn #'ignore-collision = ##t
<< { c16 a' b a } \\ { c,2 } >>
@end lilypond

@ignore
@knownissues
@c TODO investigate! Sometimes it works, sometimes not. --FV
The requirements for successfully merging different note heads that
are at the same time differently dotted are not clear.
@end ignore

@node Automatic part combining
@unnumberedsubsubsec Automatic part combining

@cindex automatic part combining
@cindex part combiner
@cindex combining parts
@cindex a due part
@cindex solo part
@funindex \partcombine
@funindex partcombine

Automatic part combining is used to merge two separate parts of music
onto a single staff. This can be especially helpful when typesetting
orchestral scores.  A single @code{Voice} is printed while the two parts
of music are the same, but in places where they differ, a second
@code{Voice} is printed.  Stem directions are set up & down accordingly
while Solo and @notation{a due} parts are also identified and marked
appropriately.

The syntax for automatic part combining is:

@example
\partcombine @var{musicexpr1} @var{musicexpr2}
@end example

The following example demonstrates the basic functionality, putting
parts on a single staff as polyphony and setting stem directions
accordingly.  The same variables are used for the independent parts and
the combined staff.

@lilypond[quote,verbatim]
instrumentOne = \relative c' {
  c4 d e f |
  R1 |
  d'4 c b a |
  b4 g2 f4 |
  e1 |
}

instrumentTwo = \relative g' {
  R1 |
  g4 a b c |
  d4 c b a |
  g4 f( e) d |
  e1 |
}

<<
  \new Staff \instrumentOne
  \new Staff \instrumentTwo
  \new Staff \partcombine \instrumentOne \instrumentTwo
>>
@end lilypond

Both parts have identical notes in the third measure, so only one
instance of the notes is printed.  Stem, slur, and tie directions are
set automatically, depending on whether the parts are playing solo or in
unison.  When needed in polyphony situations, the first part (with
context called @code{one}) gets @qq{up} stems, while the second (called
@code{two}) always gets @qq{down} stems.  In solo situations, the first
and second parts get marked with @qq{Solo} and @qq{Solo II},
respectively.  The unison (@notation{a due}) parts are marked with the
text @qq{a2}.

Both arguments to @code{\partcombine} will be interpreted as separate
@code{Voice} contexts, so if the music is being specified in relative
mode then @emph{both} parts must contain a @code{\relative} function,
i.e.,

@example
\partcombine
  \relative @dots{} @var{musicexpr1}
  \relative @dots{} @var{musicexpr2}
@end example

@noindent
A @code{\relative} section that encloses a @code{\partcombine} has no
effect on the pitches of @code{@var{musicexpr1}} or
@code{@var{musicexpr2}}.

@funindex \partcombineChords
@funindex partcombineChords
@funindex \partcombineApart
@funindex partcombineApart
@funindex \partcombineUnisono
@funindex partcombineUnisono
@funindex \partcombineSoloI
@funindex partcombineSoloI
@funindex \partcombineSoloII
@funindex partcombineSoloII
@funindex \partcombineAutomatic
@funindex partcombineAutomatic

In professional scores, voices are often kept apart from each other for
long passages of music even if some of the notes are the same in both
voices, and could just as easily be printed as unison. Combining notes
into a chord, or showing one voice as solo is, therefore, not ideal as
the @code{\partcombine} function considers each note separately. In this
case the @code{\partcombine} function can be overriden with the
following commands:

Commands ending in @code{...Once} apply only to the next note in the
music expression.

@itemize
@item
@code{\partcombineApart} and @code{\partcombineApartOnce} keep the
notes as two separate voices, even if they can be combined into a chord
or unison.

@item
@code{\partcombineChords} and @code{\partcombineChordsOnce} combine the
notes into a chord.

@item
@code{\partcombineUnisono} and @code{\partcombineUnisonoOnce} combine
both voices as @qq{unison}.

@item
@code{\partcombineSoloI} and @code{\partcombineSoloIOnce} print only
voice one, and mark it as a @qq{Solo}.

@item
@code{\partcombineSoloII} or @code{\partcombineSoloIIOnce} print only
voice two and mark it as a @qq{Solo}.

@item
@code{\partcombineAutomatic} and @code{\partcombineAutomaticOnce} end
the functions of the commands above, and revert back to the standard
@code{\partcombine} functionality.
@end itemize

@lilypond[quote,verbatim]
instrumentOne = \relative c' {
  \partcombineApart c2^"apart" e |
  \partcombineAutomatic e2^"auto" e |
  \partcombineChords e'2^"chord" e |
  \partcombineAutomatic c2^"auto" c |
  \partcombineApart c2^"apart" \partcombineChordsOnce e^"chord once" |
  c2 c |
}
instrumentTwo = \relative c' {
  c2 c |
  e2 e |
  a,2 c |
  c2 c' |
  c2 c |
  c2 c |
}

<<
  \new Staff { \instrumentOne }
  \new Staff { \instrumentTwo }
  \new Staff { \partcombine \instrumentOne \instrumentTwo }
>>
@end lilypond


@snippets

@lilypondfile[verbatim,quote,texidoc,doctitle]
{combining-two-parts-on-the-same-staff.ly}

@lilypondfile[verbatim,quote,texidoc,doctitle]
{changing-partcombine-texts.ly}


@seealso
Music Glossary:
@rglos{a due},
@rglos{part}.

Notation Reference:
@ref{Writing parts}.

Snippets:
@rlsr{Simultaneous notes}.

Internals Reference:
@rinternals{PartCombineMusic},
@rinternals{Voice}.

@knownissues

All @code{\partcombine...} functions can only accept two voices and are
not designed to work with lyrics; such that when one of the voices is
explicitly named in order to attach lyrics to it, the partcombiner will
stop working.

@code{\partcombine...} functions cannot be placed inside a @code{\times}
or @code{\relative} block.

If @code{printPartCombineTexts} is set and the two voices play the same
notes @qq{on and off}, in the same measure, the part combiner may
typeset @code{a2} more than once in that measure.

@code{\partcombine} only knows when a note starts in a @code{Voice}; it
cannot, for example, remember if a note in one @code{Voice} has already
started when combining notes that have just started in the other
@code{Voice}.  This can lead to a number of unexpected issues including
@qq{Solo} or @qq{Unison} marks being printed incorrectly.

@code{\partcombine} keeps all spanners (slurs, ties, hairpins etc.) in
the same @code{Voice} so that if any such spanners start or end in a
different @code{Voice}, they may not be printed properly or at all.

If the @code{\partcombine} function cannot combine both music
expressions (i.e. when both voices have different durations), it will
give the voices, internally, its own custom names: @code{one} and
@code{two} respectively.  This means if there is any @qq{switch} to a
differently named @code{Voice} context, the events in that differently
named @code{Voice} will be ignored.

Refer also to @emph{Known issues and warnings} when using
@code{\partcombine} with tablature in @ref{Default tablatures} and the
@emph{Note} in @ref{Automatic beams} when using automatic beaming.


@node Writing music in parallel
@unnumberedsubsubsec Writing music in parallel

@cindex writing music in parallel
@cindex interleaved music
@cindex parallel music
@funindex \parallelMusic
@funindex parallelMusic

Music for multiple parts can be interleaved in input code.  The
function @code{\parallelMusic} accepts a list with the names of a
number of variables to be created, and a musical expression.  The
content of alternate measures from the expression become the value
of the respective variables, so you can use them afterwards to
print the music.

@warning{Bar checks @code{|} must be used, and the measures must
be of the same length.}

@lilypond[quote,verbatim]
\parallelMusic #'(voiceA voiceB voiceC) {
  % Bar 1
  r8 g'16 c'' e'' g' c'' e'' r8 g'16 c'' e'' g' c'' e'' |
  r16 e'8.~   e'4            r16 e'8.~   e'4            |
  c'2                        c'2                        |

  % Bar 2
  r8 a'16 d'' f'' a' d'' f'' r8 a'16 d'' f'' a' d'' f'' |
  r16 d'8.~   d'4            r16 d'8.~   d'4            |
  c'2                        c'2                        |

}
\new StaffGroup <<
  \new Staff << \voiceA \\ \voiceB >>
  \new Staff { \clef bass \voiceC }
>>
@end lilypond

Relative mode may be used.  Note that the @code{\relative} command
is not used inside @code{\parallelMusic} itself.  The notes are
relative to the preceding note in the voice, not to the previous
note in the input -- in other words, relative notes for
@code{voiceA} ignore the notes in @code{voiceB}.

@lilypond[quote,verbatim]
\parallelMusic #'(voiceA voiceB voiceC) {
  % Bar 1
  r8 g16 c e g, c e r8 g,16 c e g, c e  |
  r16 e8.~ e4       r16 e8.~  e4        |
  c2                c                   |

  % Bar 2
  r8 a,16 d f a, d f r8 a,16 d f a, d f |
  r16 d8.~  d4       r16 d8.~  d4       |
  c2                 c                  |

 }
\new StaffGroup <<
  \new Staff << \relative c'' \voiceA \\ \relative c' \voiceB >>
  \new Staff \relative c' { \clef bass \voiceC }
>>
@end lilypond

This works quite well for piano music.  This example maps four
consecutive measures to four variables:

@lilypond[quote,verbatim]
global = {
  \key g \major
  \time 2/4
}

\parallelMusic #'(voiceA voiceB voiceC voiceD) {
  % Bar 1
  a8    b     c   d     |
  d4          e         |
  c16 d e fis d e fis g |
  a4          a         |

  % Bar 2
  e8      fis  g     a   |
  fis4         g         |
  e16 fis g  a fis g a b |
  a4           a         |

  % Bar 3 ...
}

\score {
  \new PianoStaff <<
     \new Staff {
       \global
       <<
         \relative c'' \voiceA
         \\
         \relative c'  \voiceB
       >>
     }
     \new Staff {
       \global \clef bass
       <<
         \relative c \voiceC
         \\
         \relative c \voiceD
       >>
     }
  >>
}
@end lilypond


@seealso
Learning Manual:
@rlearning{Organizing pieces with variables}.

Snippets:
@rlsr{Simultaneous notes}.