1 @c -*- coding: utf-8; mode: texinfo; documentlanguage: ja -*-
4 Translation of GIT committish: c028761d49ac4820206806dbc58e9704a87b4a8
6 When revising a translation, copy the HEAD committish of the
7 version that you are working on. For details, see the Contributors'
8 Guide, node Updating translation committishes..
14 Tutorial guidelines: (different from policy.txt!)
15 - unless you have a really good reason, use either
16 @lilypond[verbatim,quote]
18 @lilypond[verbatim,quote,relative=2]
20 Don't use any other relative=X commands.
22 - use "aes" and "ees" instead of "as" and "es". I know it's not
23 correct Dutch naming, but let's not confuse people with this
24 until we get to the Basic notation chapter.
26 - Add "Music Glossary: @rglos{foo}" to the *top* of the relevant
27 portions of the tutorial.
32 @c Translators: Yoshiki Sawada
33 @c Translation status: post-GDP
38 @translationof Common notation
40 このチュートリアルではまず LilyPond 音楽言語についての紹介を行い、@c
42 LilyPond との最初の接触の後、我々は一般的な音楽記譜法を持つ楽譜を@c
55 @translationof Single staff notation
57 このセクションはでは 1 つの譜表の上にある 1 つの声部のために使用される@c
73 @translationof Bar checks
75 必須ではありませんが、入力コードの中で @emph{小節チェック} を挿入して@c
76 どこに小節線を置こうとしているのかを示すべきです。@c
77 小節チェックは挿入するには @code{|} を入力します。@c
78 小節チェックがあると、プログラムはあなたが各小節に入力した演奏時間が@c
79 正しい長さになっているかを検証することができます。@c
80 さらに、小節チェックは要素を整理する助けとなるため、
83 @lilypond[verbatim,quote,relative=2]
84 g1 | e1 | c2. c'4 | g4 c g e | c4 r r2 |
89 @ruser{Bar and bar number checks}
94 @translationof Accidentals and key signatures
96 @warning{新しいユーザ、特に音楽理論に馴染みのないユーザは@c
98 -- このページの最後にある警告を呼んでください!}
102 @cindex accidentals (臨時記号)
103 @cindex accidentals and key signatures (臨時記号と調号)
105 @cindex double sharp (ダブル シャープ)
106 @cindex sharp, double (ダブル シャープ)
108 @cindex double flat (ダブル フラット)
109 @cindex flat, double (ダブル フラット)
116 音楽用語集: @rglos{sharp}, @rglos{flat}, @rglos{double sharp},
117 @rglos{double flat}, @rglos{accidental}
118 @c シャープ (sharp), フラット (flat), ダブル シャープ (double sharp),
119 @c ダブル フラット (double flat), 臨時記号 (accidental)
121 @notation{シャープ} は音符名に @code{is} を付け加えることによって作られ、@c
122 @notation{フラット} は @code{es} を付け加えることによって作られます。@c
123 予想しているかもしれませんが、@notation{ダブル シャープ} や@c
124 @notation{ダブル フラット} は @code{isis} や @code{eses} を@c
126 この構文はドイツ語やオランダ語のような北欧とドイツの言語@c
128 @notation{臨時記号} に対して他の名前を使うには、@c
129 @ruser{Note names in other languages} を参照してください。
131 @lilypond[verbatim,quote,relative=2]
132 cis1 ees fisis, aeses
136 @cindex key signature, setting
140 @cindex key signature (調号)
143 @cindex accidentals and key signature (臨時記号と調号)
144 @cindex content vs. layout (内容 vs. レイアウト)
145 @cindex layout vs. content (レイアウト vs. 内容)
154 音楽用語集: @rglos{key signature}, @rglos{major}, @rglos{minor}
156 @notation{調号} はコマンド @code{\key} とそれに続くピッチと
157 @code{\major} または @code{\minor} によってセットされます。
159 @lilypond[verbatim,quote,relative=2]
169 @subheading 警告: 調号とピッチ
171 音楽用語集: @rglos{accidental}, @rglos{key signature},
172 @rglos{pitch}, @rglos{flat}, @rglos{natural}, @rglos{sharp},
173 @rglos{transposition}
175 @notation{臨時記号} を譜刻するかどうかを決定するために LilyPond はピッチと
176 @notation{調号} を検証します。@c
177 調号は @emph{譜刻される} 臨時記号にだけ影響を与え、@c
178 音符の @notation{ピッチ} には影響を与えません!@c
179 この特徴はしばしば新しく LilyPond を始める人を混乱させるため、@c
182 LilyPond は音楽の内容とレイアウトを峻別します。@c
183 音符の変更記号 (@notation{フラット}、@notation{ナチュラル}、@c
184 @notation{シャープ}) はピッチの一部であるため、音楽の内容です。@c
185 臨時記号 (@emph{譜刻される}フラット、ナチュラル、シャープ記号) が@c
186 対応する音符の前に譜刻されるかどうかはレイアウトの問題です。@c
187 レイアウトは規則に従う何らかのものであるため、@c
188 臨時記号はそれらの規則に対応して自動的に譜刻されます。@c
189 あなたの音楽の中でのピッチは人工的な仕掛けであるため、@c
190 それらは自動的には追加されず、あなたはあなたの聞きたいピッチを@c
195 @lilypond[verbatim,quote,relative=2]
201 臨時記号を譜刻されている音符はありません。@c
202 しかしながら、あなたは入力ファイルで @code{is} を付け加えて @code{cis} や
203 @code{fis} などとタイプしなければなりません。
205 コード @code{b} は @qq{譜表の最初の線 (一番上の線) のすぐ下に黒い点を譜刻せよ}
207 そうではなく、@qq{ピッチが B ナチュラルである音符がある} という意味です。@c
208 A フラット メジャーの調では、@code{b} には臨時記号が付きます:
210 @lilypond[verbatim,quote,relative=2]
218 黒鍵を押したいのであれば、音符名に @code{-is} や @code{-es} を付ける@c
221 すべての変化を明示的に付け加えることは入力時にちょっとした努力を@c
223 しかしながら、移調がより容易になる、異なる規約に対応して臨時記号を@c
225 臨時記号がどのように異なる規則に対応して譜刻されるのかについての@c
226 いくつかの例は、@ruser{Automatic accidentals} を参照してください。
230 記譜法リファレンス: @ruser{Note names in other languages},
232 @ruser{Automatic accidentals},
233 @ruser{Key signature}
234 @c 他の言語での音符名, 臨時記号, 臨時記号の自動譜刻, 調号
239 @translationof Ties and slurs
243 @cindex slur, phrasing (フレージング スラー)
244 @cindex phrasing slur (フレージング スラー)
256 @notation{タイ}はタイが始まる最初の音符にチルド @code{~} を@c
259 @lilypond[verbatim,quote,relative=2]
260 g4~ g c2~ | c4~ c8 a~ a2 |
268 @notation{スラー}は多くの音符に亘って描かれる曲線です。@c
269 スラーの開始音符と終了音符にはそれぞれ @code{(} と @code{)} を付加します。
271 @lilypond[verbatim,quote,relative=2]
272 d4( c16) cis( d e c cis d) e( d4)
276 @subheading フレージング スラー
278 音楽用語集: @rglos{slur}, @rglos{phrasing}
280 長い @notation{フレーズ} を示すためのスラーは @code{\(} と @code{\)}
282 あなたは@notation{スラー}とフレージング スラーを重ねることができます。@c
283 しかしながら、あなたは複数のスラーを重ねたり、複数のフレージング スラーを@c
286 @lilypond[verbatim,quote,relative=2]
287 g4\( g8( a) b( c) b4\)
292 @cindex slurs versus ties (スラー vs. タイ)
293 @subheading 警告: スラー vs. タイ
295 音楽用語集: @rglos{articulation}, @rglos{slur}, @rglos{tie}
297 @notation{スラー} は @notation{タイ} のように見えますが、意味が異なります。@c
298 タイは単純に最初の音符をより長くするものであり、@c
299 同じ音程の音符のペアに対してのみ使用することができます。@c
300 スラーは複数の音符による @notation{アーティキュレーション} (節、表現) を@c
301 表していて、より大きな音符のグループに対して使用することができます。@c
302 スラーとタイはネストさせることができます。
304 @lilypond[verbatim,quote,relative=2]
309 記譜法リファレンス: @ruser{Ties}, @ruser{Slurs},
310 @ruser{Phrasing slurs}
313 @node アーティキュレーションと強弱記号
314 @subsection アーティキュレーションと強弱記号
315 @translationof Articulation and dynamics
318 @subheading アーティキュレーション
320 @cindex articulation (アーティキュレーション)
321 @cindex accent (アクセント)
322 @cindex staccato (スタッカート)
324 音楽用語集: @rglos{articulation}
326 一般的な @notation{アーティキュレーション} はダッシュ @code{-} と単一文字を@c
327 使うことで音符に付け加えることができます:
329 @lilypond[verbatim,quote,relative=2]
337 @cindex fingering (運指法記号)
342 音楽用語集: @rglos{fingering}
344 同様に、@notation{運指法} はダッシュ (@code{-}) と譜刻する数字を使うことで@c
347 @lilypond[verbatim,quote,relative=2]
351 通常、アーティキュレーションと運指法は自動的に刻譜されます。@c
352 しかしながら、あなたはダッシュ (@code{-}) を @code{^} (上へ) または
353 @code{_} (下へ) に置き換えることによって方向を指定することができます。@c
354 さらに、あなたは同じ音符に複数のアーティキュレーションを@c
356 しかしながらたいていの場合は、LilyPond にアーティキュレーションの方向を@c
359 @lilypond[verbatim,quote,relative=2]
360 c4_-^1 d^. f^4_2-> e^-_+
366 @cindex dynamics (強弱記号)
367 @cindex decrescendo (デクレッシェンド)
368 @cindex crescendo (クレッシェンド)
383 音楽用語集: @rglos{dynamics}, @rglos{crescendo}
386 @notation{強弱記号} は音符にバック スラッシュ@c
388 (訳者注: バック スラッシュは英語フォントではスラッシュ @code{/} を@c
389 左右反転させたもの、日本語フォントでは円マーク
390 @code{¥} になるのが一般的です。)
392 付きのマークを付け加えることによって作成されます:
394 @lilypond[verbatim,quote,relative=2]
398 @notation{クレッシェンド} と @notation{デクレッシェンド} はコマンド @code{\<} と
399 @code{\>} によって開始されます。@c
400 次の強弱記号 -- 例えば、@code{\f} -- が (デ)クレッシェンドを終わらせます。@c
401 コマンド @code{\!} を使って終わらせることもできます:
403 @lilypond[verbatim,quote,relative=2]
410 @ruser{Articulations and ornamentations},
411 @ruser{Fingering instructions},
416 @subsection テキストを追加する
417 @translationof Adding text
419 @cindex text, adding (テキストを追加する)
420 @cindex adding text (テキストを追加する)
421 @cindex markup (マークアップ)
426 テキストをあなたの楽譜に追加することができます:
428 @lilypond[verbatim,quote,relative=2]
432 追加のフォーマット指定を @code{\markup} コマンドで追加することができます:
434 @lilypond[verbatim,quote,relative=2]
435 c2^\markup { \bold espr }
437 \dynamic f \italic \small { 2nd } \hspace #0.1 \dynamic p
448 @subsection 自動連桁と手動連桁
449 @translationof Automatic and manual beams
451 @cindex beaming (連桁を付ける)
452 @cindex automatic beams (自動連桁)
453 @cindex manual beams (手動連桁)
454 @cindex beams, automatic (自動連桁)
455 @cindex beams, manual (手動連桁)
456 @cindex beams, by hand (手動による連桁)
461 @funindex \autoBeamOff
462 @funindex autoBeamOff
463 @funindex \autoBeamOn
468 すべての @notation{連桁} は自動的に描かれます:
470 @lilypond[verbatim,quote,relative=2]
471 a8 ais d ees r d c16 b a8
474 あなたが自動連桁を好まない場合、手動で上書きすることもできます。@c
475 ある箇所の連桁を修正するには、連桁を付ける最初の音符に @code{[} を、@c
476 最後の音符に @code{]} を付け加えます。
478 @lilypond[verbatim,quote,relative=2]
479 a8[ ais] d[ ees r d] c16 b a8
482 もしあなたが楽譜全体あるいは一部で自動連桁を Off にしたいのなら、@c
483 自動連桁を Off にするにはコマンド @code{\autoBeamOff} を、@c
484 再度自動連桁を On にするには @code{\autoBeamOn} を使用します。
486 @lilypond[verbatim,quote,relative=2]
496 @ruser{Automatic beams},
501 @subsection 高度なリズム コマンド
502 @translationof Advanced rhythmic commands
506 @cindex pickup (ピックアップ)
507 @cindex anacrusis (弱拍)
508 @cindex partial measure (部分小節)
513 音楽用語集: @rglos{anacrusis}
515 ピックアップ (訳者: 本来の拍子以外の拍子を持つ小節のこと)
516 (または@notation{弱拍}) はキーワード @code{\partial} によって挿入されます。@c
518 @code{\partial 4} は 4 分音符のピックアップであり、@c
519 @code{\partial 8} は 8 分音符のピックアップです。
521 @lilypond[verbatim,quote,relative=2]
530 @cindex triplets (3 連符)
535 音楽用語集: @rglos{note value}, @rglos{triplet}
537 @notation{連符} は @code{\times} キーワードによって作成されます。@c
538 これは 2 つの引数をとります: 分数と楽譜の断片です。@c
539 楽譜の断片の演奏時間と分数が乗算されます。@c
540 3 連符は表記された演奏時間の 2/3 の長さなので、@notation{3 連符} は@c
543 @lilypond[verbatim,quote,relative=2]
544 \times 2/3 { f8 g a }
545 \times 2/3 { c8 r c }
546 \times 2/3 { f,8 g16[ a g a] }
553 @cindex grace notes (装飾小音符)
554 @cindex acciaccatura (短前打音)
555 @cindex appoggiatura (前打音)
559 @funindex \acciaccatura
560 @funindex acciaccatura
561 @funindex \appoggiatura
562 @funindex acciaccatura
564 音楽用語集: @rglos{grace notes}, @rglos{acciaccatura},
567 @notation{装飾小音符} は @code{\grace} コマンドによって作成されますが、@c
568 キーワード @code{\appoggiatura} や @code{\acciaccatura} による接頭音楽表記に@c
571 @lilypond[verbatim,quote,relative=2]
572 c2 \grace { a32[ b] } c2 |
573 c2 \appoggiatura b16 c2 |
574 c2 \acciaccatura b16 c2 |
586 @section 同時に演奏する複数の音符
587 @translationof Multiple notes at once
590 -- 複数の楽器、単一の楽器に対する複数の譜 (すなわちピアノ)、和音 --
593 楽譜の中での多声は楽曲の中にある複数の声部を参照します。@c
594 LilyPond の中での多声は同じ譜表上にある複数の声部を参照します。
606 @subsection 音楽表記についての説明
607 @translationof Music expressions explained
609 @cindex music expression (音楽表記)
610 @cindex expression, music (音楽表記)
611 @cindex compound music expression (複合音楽表記)
612 @cindex music expression, compound (複合音楽表記)
614 LilyPond 入力ファイルの中では、音楽は @notation{音楽表記} によって表されます。@c
615 単一の音符は 1 つの音楽表記になります:
617 @lilypond[verbatim,quote,relative=2]
621 表記を波括弧で括ることによって @emph{複合音楽表記} が作成されます。@c
622 2 つの音符を持つ複合音楽表記を作成しました:
624 @lilypond[verbatim,quote,relative=2]
628 波括弧の中にある音楽表記 (例えば、いくつかの音符) のグループはそれらが@c
629 シークエンスであるということを意味しています
630 (つまり、それぞれの音符は前の音符に続くということです)。@c
633 @lilypond[verbatim,quote,relative=2]
638 @subheading 数学的表記との類似
639 @c Analogy: mathematical expressions
642 大きな式は小さな式を組み合わせることによって作成されます。@c
643 そのような式は表記と呼ばれ、それらの定義は再帰的なのであなたは@c
644 任意に複雑で大きな表記を作ることができます。@c
654 ((1 + 2) * 3) / (4 * 5)
658 各表記は次の (より大きな) 表記に組み込まれています。@c
659 最も単純な表記は数であり、より大きな表記は演算子 (@code{+}, @code{*},
660 @code{/} など) と括弧を組み合わせることによって作成されます。@c
661 数学式と同様に、音楽表記も任意の深さにネストさせることができ、@c
662 それは多声楽譜のような複雑な音楽のために必要なことです。
665 @subheading 同時進行の音楽表記: 複数の譜
666 @c Simultaneous music expressions: multiple staves
668 @cindex multiple staves (複数の譜)
669 @cindex staves, multiple (複数の譜)
670 @cindex polyphony (多声)
671 @cindex combining expressions in parallel (表記を並列に組み合わせる)
672 @cindex parallel expressions (並列表記)
673 @cindex expressions, parallel (並列表記)
674 @cindex relative notes and simultaneous music (相対音符と同時進行する音楽)
675 @cindex relative notes and parallel expressions (相対音符と並列表記)
676 @cindex simultaneous music and relative notes (同時進行する音楽と相対音符)
677 @cindex parallel expressions and relative notes (並列表記と相対音符)
683 音楽用語集: @rglos{polyphony}
685 このテクニックは @notation{多声音楽} に対して有用です。@c
686 複数の声部や複数の譜を持つ音楽を入力するために、@c
688 2 つの声部を同時に演奏すべきであるということを示すには、@c
689 単純に音楽表記を同時進行するよう組み合わせて入力します。@c
690 @q{同時進行} の音楽表記は @code{<<} と @code{>>} で音楽表記を@c
692 以下の例では、3 つのシークエンス (すべてのシークエンスはそれぞれ 2 つの音符を@c
693 保持しています) が同時進行するように組み合わされています:
695 @lilypond[verbatim,quote]
705 入力の各レベルに対して異なる量のスペースをインデントとして与えていることに@c
707 LilyPond は行の先頭にどれくらい多く (あるいは少なく) のスペースがあるかを@c
709 しかしながら、上の例のように LilyPond コードにインデントを入れることによって@c
712 @warning{入力での各音符は前の音符との相対関係にあり、先頭の @code{@bs{}relative}
713 コマンドの中にある @code{c''} と相対関係にあるわけではありません。}
716 @subheading 同時進行する音楽表記: 単一の譜表
717 @c Simultaneous music expressions: single staff
719 楽曲の中にある譜の数を決定するために、@c
720 LilPond は最初の音楽表記の始まりを調べます。@c
721 始まりの音楽表記が単一の表記であった場合、楽譜の中の譜表は 1 つです。@c
722 以下の例は複雑な表記を持ちますが、単一の表記で始まっているため譜表も 1 つです。
724 @lilypond[verbatim,quote]
727 << { e2 f } { c2 <<b d>> } >> |
734 @translationof Multiple staves
736 @cindex multiple staves (複数の譜)
737 @cindex staves, multiple (複数の譜)
738 @cindex context (コンテキスト)
739 @cindex context, notation (記譜コンテキスト)
740 @cindex notation context (記譜コンテキスト)
752 @ref{音楽表記についての説明} で見てきたように、@c
753 LilyPond 入力ファイルは音楽表記によって構築されています。@c
754 複数の同時進行の音楽表記で始まる楽譜の場合、LilyPond は複数の譜を作成します。@c
755 しかしながら、各譜表を明示的に作成すると何が起こるか@c
758 複数の譜表を譜刻するには、1 つの譜表を形成する音楽の各部分の前に
759 @code{\new Staff} を付け加えます。@c
760 これらの @code{Staff} 要素は @code{<<} と @code{>>} で並列に組み合わされます:
762 @lilypond[verbatim,quote]
765 \new Staff { \clef "treble" c4 }
766 \new Staff { \clef "bass" c,,4 }
771 コマンド @code{\new} は 1 つの @q{記譜コンテキスト} を導入します。@c
772 記譜コンテキストは音楽的イベント (音符や @code{\clef} コマンドなど) が@c
774 単純な楽曲では、そのような記譜コンテキストは自動的に作成されます。@c
775 より複雑な楽曲ではコンテキストを明示的に記述することが望ましいです。
777 コンテキストにはいくつかのタイプがあります。@c
778 @code{Score}, @code{Staff}, @code{Voice} は旋律記譜を扱います。@c
779 一方、@code{Lyrics} は歌詞テキストをセットし、@code{ChordNames} は@c
782 構文という観点で見ると、@code{\new} を音楽表記の先頭に付け加えることによって@c
784 これは数学でのマイナス符号に似ています。@c
785 数式 @math{(4+5)} は数学表記であり、@math{-(4+5)} はより大きな数学表記です。
787 ある譜表に挿入された@notation{拍子記号}はデフォルトで他のすべての譜に@c
789 一方で、ある譜表に挿入された調号は他のすべての譜に影響を@emph{与えません}。@c
790 記号によってデフォルトの振る舞いが異なるのは、移調する楽器を扱う楽譜の方が@c
791 複合リズム (polyrhythmic) の楽譜よりも一般的だからです。
793 @lilypond[verbatim,quote]
796 \new Staff { \clef "treble" \key d \major \time 3/4 c4 }
797 \new Staff { \clef "bass" c,,4 }
804 @translationof Staff groups
806 @cindex piano staff (ピアノ譜)
807 @cindex staff, piano (ピアノ譜)
808 @cindex choir staff (合唱譜)
809 @cindex staff, choir (合唱譜)
810 @cindex grand staff (グランド譜)
811 @cindex staff, grand (グランド譜)
812 @cindex staff group (譜表グループ)
823 ピアノ譜は @notation{ブレース} でつながれた 2 つの譜表として刻譜されます。@c
824 そのような譜表を刻譜することは @ref{複数の譜} での多声の例に@c
826 しかしながら、今度は表記全体が @code{PianoStaff} の中に挿入されます:
837 @lilypond[verbatim,quote]
840 \new Staff { \time 2/4 c4 e | g g, | }
841 \new Staff { \clef "bass" c,,4 c' | e c | }
846 ピアノ譜以外の譜表グループ化はオーケストラ譜向けには @code{\new GrandStaff}
847 で、ボーカル譜向けには @w{@code{\new ChoirStaff}} で導入されます。@c
848 これらの譜表グループはそれぞれタイプの異なるコンテキストを形成し、各システム
849 (訳者: 楽譜 1 行分のこと。ピアノ譜では右手と左手の 2 つの譜表ペアでの 1 行が
850 1 システムになります) の左端にブレースを付けて、@c
856 @ruser{Keyboard and other multi-staff instruments},
857 @ruser{Displaying staves}
861 @subsection 音符を組み合わせて和音にする
862 @translationof Combining notes into chords
865 @cindex note durations in chords (和音の中での音符の演奏時間)
871 音符を @code{<< ... >>} で囲んでそれらの音符が同時進行であることを@c
872 示すことによって、それらの音符を@notation{和音}として@c
873 組み合わせる方法について見てきました。@c
874 しかしながら、和音であることを示すための通常の方法は音符を < ... > (山括弧)
876 和音の中にある音符はすべて同じ演奏時間でなければならず、@c
877 その演奏時間は山括弧を閉じた後に置かれなければならないということに@c
880 @lilypond[verbatim,quote,relative=2]
884 和音は単一の音符とほとんど同じであると考えてください:
885 単一の音符に付け加えられるものはほとんどすべて和音にも付け加えられ、@c
886 付け加えるものはすべて山括弧の@emph{外}に付け加えられなければなりません。@c
887 例えば、あなたは連桁やタイなどのマークをコードに組み合わせることができます。@c
888 それらは山括弧の外側に置かれなければなりません。
890 @lilypond[verbatim,quote,relative=2]
891 r4 <c e g>~ <c f a>2 |
892 <c e g>8[ <c f a> <c e g> <c f a>] <c e g>\>[ <c f a> <c f a> <c e g>]\! |
893 r4 <c e g>8.\p <c f a>16( <c e g>4-. <c f a>) |
898 @ruser{Chorded notes}
903 @translationof Single staff polyphony
905 @cindex polyphony (多声)
906 @cindex multiple voices (複数のボイス)
907 @cindex voices, more on one staff (1 つの譜表上に複数のボイス)
908 @cindex single staff polyphony (単一譜表の多声)
909 @cindex spacer rest (空白休符)
910 @cindex rest, spacer (空白休符)
912 @funindex << ... \\ ... >>
917 LilyPond での多声音楽はまだ説明していないコンセプトを用いますので、@c
918 多声音楽についてここでは説明しません。@c
919 以下のセクションで多声音楽で用いるコンセプトを紹介し、@c
927 @ruser{Simultaneous notes}
930 異なる旋律が単一の譜に組み込まれる場合、それらは多声部として刻譜されます。@c
931 各声部はそれ自体の符幹 (符頭から上下に出る棒)、スラー、@c
932 連桁 (符幹と符幹を結ぶ横棒) を持ちます。@c
933 最上段の声部は符頭から上に伸びる符幹を持ち、@c
936 そのような多声のパートを入力するには、各声部をシークエンスとして
937 (@w{@code{@{ ... @}}} を使って) 入力し、それらを @code{\\} で区切って@c
938 結合することで同時進行するように組み合わせます:
940 @lilypond[verbatim,quote,relative=2]
947 多声部音楽を刻譜する場合、空白休符を使用すると都合が良いかもしれません:
949 空白休符は一時的に演奏されない声部の空白期間を埋めるのに有用です。@c
950 今度は通常の休符 (@code{r}) の代わりに空白休符 (@code{s}) を使った@c
953 @lilypond[verbatim,quote,relative=2]
961 さらに、これらの表記は任意にネストさせることができます。
963 @lilypond[verbatim,quote,relative=2]
971 { <c g>1 ~ <c g>4 } \\
978 記譜法リファレンス: @ruser{Simultaneous notes}
987 このセクションでは声楽とシンプルな歌曲譜についての紹介を行います。
997 @subsection 簡単な歌曲を作成する
998 @translationof Setting simple songs
1003 @funindex \addlyrics
1006 音楽用語集: @rglos{lyrics}
1009 歌詞は @notation{Girls and boys come out to play} です:
1011 @lilypond[verbatim,quote]
1015 d4 b8 c4 a8 | d4 b8 g4
1019 @code{\addlyrics} キーワードで組み合わせることによって、@c
1020 @notation{歌詞} をこれらの音符にセットすることができます。@c
1021 歌詞は音節ごとにスペースで区切って入力します。
1023 @lilypond[verbatim,quote]
1028 d4 b8 c4 a8 | d4 b8 g4
1031 Girls and boys come | out to play,
1036 @warning{空白または改行によって最後の音節を閉じ波括弧と分けることが不可欠です。@c
1037 そうしなければ、波括弧は音節の一部と見なされ、@c
1038 原因の分かりづらいエラーを引き起こします。@c
1039 @rprogram{見かけ上 ../ly/init.ly のエラーとなる} を参照してください。}
1041 二重の山括弧 @w{@code{<< ... >>}} が楽曲全体を囲っていて、@c
1042 音楽と歌詞が同時進行することを示しています。
1046 @subsection 歌詞を旋律に揃える
1047 @translationof Aligning lyrics to a melody
1049 @cindex melisma (メリスマ)
1050 @cindex extender line (延長線)
1051 @cindex hyphens (ハイフン)
1052 @cindex underscore (アンダスコア)
1053 @cindex lyrics, aligning (歌詞を揃える)
1054 @cindex aligning lyrics (歌詞を揃える)
1055 @cindex lyrics, multi-syllable words (歌詞の中で複数の音節を持つ単語)
1056 @cindex words with multiple syllables in lyrics (歌詞の中で複数の音節を持つ単語)
1058 音楽用語集: @rglos{melisma}, @rglos{extender line}
1060 童謡の次の行は @notation{The moon doth shine as bright as day} です。@c
1063 @lilypond[verbatim,quote]
1068 d4 b8 c4 a8 | d4 b8 g4 g8 |
1069 a4 b8 c b a | d4 b8 g4. |
1072 Girls and boys come | out to play,
1073 The | moon doth shine as | bright as day; |
1078 上の例のコードをコンパイルすると、コンソール出力にいくつかの警告が表示されます:
1081 song.ly:12:29: warning: barcheck failed at: 5/8
1082 The | moon doth shine as
1084 song.ly:12:46: warning: barcheck failed at: 3/8
1085 The | moon doth shine as | bright as day;
1089 これは小節チェックの有用性を示す良い例です。@c
1091 追加した歌詞は適切に音符に揃えられてはいません。@c
1092 単語 @notation{shine} は 1 つの音符ではなく
1093 2 つの音符に割り当てられるべきです。@c
1094 これは @notation{メリスマ} と呼ばれ、@c
1095 歌詞の音節 1 つを複数の音符に割り当てます。@c
1096 音節を複数の音符に広げる方法はいくつかあります。@c
1097 最も簡単な方法は割り当てられる音符にスラーを付けることです。@c
1098 詳細は @ref{タイとスラー} を参照してください。
1100 @lilypond[verbatim,quote]
1105 d4 b8 c4 a8 | d4 b8 g4 g8 |
1106 a4 b8 c( b) a | d4 b8 g4. |
1109 Girls and boys come | out to play,
1110 The | moon doth shine as | bright as day; |
1115 今度は、単語は音符に対して正しく並んでいます。@c
1117 @notation{shine as} 上の音符に対する自動連桁は適当でないように見えます。@c
1118 これを修正するために、手動連桁コマンドを挿入して自動連桁を@c
1120 詳細は @ref{自動連桁と手動連桁} を参照してください。
1122 @lilypond[verbatim,quote]
1127 d4 b8 c4 a8 | d4 b8 g4 g8 |
1128 a4 b8 c([ b]) a | d4 b8 g4. |
1131 Girls and boys come | out to play,
1132 The | moon doth shine as | bright as day; |
1137 スラーを用いる方法のほかに、メリスマに含まれるべきである各音符に対応した@c
1138 アンダスコア @code{_} を用いることによって@c
1139 その歌詞がメリスマであるということを示すことができます:
1141 @lilypond[verbatim,quote]
1146 d4 b8 c4 a8 | d4 b8 g4 g8 |
1147 a4 b8 c[ b] a | d4 b8 g4. |
1150 Girls and boys come | out to play,
1151 The | moon doth shine _ as | bright as day; |
1156 ある歌詞がいくつかの音符に亘って延長される場合や@c
1157 単一の非常に長い音符に割り当てられる場合、@c
1158 通常はその歌詞からその歌詞に対応しているすべての音符の下に@c
1159 @notation{延長線} が描かれます。@c
1160 延長線は 2 つのアンダスコア @code{__} で挿入します。@c
1161 今度は、例として Purcell の @notation{Dido and Æeneas} から@c
1164 @lilypond[verbatim,quote]
1169 g2 a bes | bes2( a) b2 |
1170 c4.( bes8 a4. g8 fis4.) g8 | fis1
1174 am | laid __ in | earth,
1179 今までの例には複数の音節を持つ単語はありませんでした。@c
1180 通常、複数の音節を持つ単語は音節ごとに 1 つの音符に分割され、@c
1182 ハイフンは 2 つのダッシュとして入力し、@c
1183 その結果として音節の間にハイフンが描かれます。@c
1184 今度の例では歌詞に複数の音節を持つ単語が含まれ、@c
1185 我々が今まで歌詞を音符に揃える方法について学んだことがすべて含まれています。
1187 @c no ragged-right here because otherwise the hyphens get lost,
1188 @c but the example is long enough to avoid looking strange.
1189 @lilypond[verbatim,quote,noragged-right]
1190 @lilypond[verbatim,quote,noragged-right]
1196 d4 | g4 g a8( b) | g4 g b8( c) |
1200 A -- | way in a __ | man -- ger,
1201 no __ | crib for a | bed, __
1206 ある歌詞では -- 特にイタリア語では -- 反対のことが求められます:
1207 複数の音節を 1 つの音符にセットします。@c
1208 これは音節を単一のアンダスコア @code{_} (スペース無し) でリンクさせるか、@c
1209 クォートで囲むことによって達成されます。@c
1210 今度の例は Rossini の @notation{Figaro} からで、@c
1211 @notation{Largo al factotum} の @notation{al} は
1212 @notation{Largo} の @notation{go} と同じ音符で歌われなければなりません:
1214 @c no ragged-right here because otherwise the hyphens get lost,
1215 @c but the example is long enough to avoid looking strange.
1216 @lilypond[verbatim,quote,noragged-right]
1222 c4.~ c8 d b | c8([ d]) b c d b | c8
1225 Lar -- go_al fac -- | to -- tum del -- la cit -- | tÃ
1237 @subsection 複数の譜への歌詞
1238 @translationof Lyrics to multiple staves
1240 @cindex lyrics and multiple staves (歌詞と複数の譜)
1241 @cindex multiple staves and lyrics (複数の譜と歌詞)
1243 @code{\addlyrics} を用いた簡単なアプローチは歌詞を複数の譜表の下に置くために@c
1245 ここで、Handel の @notation{Judas Maccabæus} から例を挙げます:
1247 @lilypond[verbatim,quote]
1253 c8 | c8([ bes]) a a([ g]) f | f'4. b, | c4.~ c4
1256 Let | flee -- cy flocks the | hills a -- | dorn, __
1262 r8 | r4. r4 c8 | a'8([ g]) f f([ e]) d | e8([ d]) c bes'4
1265 Let | flee -- cy flocks the | hills a -- dorn,
1270 この簡単な例よりも複雑な楽譜では、変数を使って楽譜構造を音符と歌詞から@c
1272 このことは @ref{変数を用いて楽曲を編成する} で議論されています。
1283 @translationof Final touches
1285 このセクションはチュートリアルの最終セクションです。@c
1286 単純な楽譜に仕上げを加える方法を示し、@c
1287 このマニュアルの残りの部分についての紹介を行います。
1293 * このチュートリアルの後にすべきこと::
1298 @subsection 変数を用いて楽曲を編成する
1299 @translationof Organizing pieces with variables
1301 @cindex variables (変数)
1302 @cindex variables, defining (変数を定義する)
1303 @cindex identifiers (識別子)
1304 @cindex macros (マクロ)
1305 @cindex assigning variables (変数を割り当てる)
1306 @cindex using variables (変数を使用する)
1307 @cindex variables, using (変数を使用する)
1308 @cindex variables, characters allowed in (変数で使用できる文字)
1309 @cindex characters allowed in variables (変数で使用できる文字)
1311 これまで議論してきたすべての要素を組み合わせてより大きなファイルを作成すると、@c
1313 多くの譜を持つ多声音楽では、入力ファイルはとても混乱しやすくなります。@c
1314 @emph{変数} を使って混乱を避けることができます。
1316 変数 (これは識別子やマクロとも言えます) を使うことによって、@c
1317 音楽表記の複雑さを打破することができます。@c
1321 namedMusic = @{ @dots{} @}
1324 音楽表記 @code{namedMusic} の内容は名前の前にバックスラッシュを置くことによって
1325 (@code{\namedMusic}、これはまさに LilyPond の標準コマンドと同様です) 後で@c
1328 @lilypond[verbatim,quote]
1329 violin = \new Staff {
1335 cello = \new Staff {
1351 変数の名前に使えるのはアルファベットだけであり、数字、アンダスコア、ダッシュを@c
1354 変数はメインの音楽表記の @emph{前} に定義されていなければなりません。@c
1355 しかしながら定義後は必要とされる場所で何度でも使用できます。@c
1356 変数の定義後は、その変数を他の変数定義の中で使うことも可能であり、
1357 楽曲のある部分が何度もリピートしている場合に入力の手間を省くことができます。
1359 @lilypond[verbatim,quote]
1360 tripletA = \times 2/3 { c,8 e g }
1361 barA = { \tripletA \tripletA \tripletA \tripletA }
1368 変数を入力ファイルの中にある他の多くのオブジェクト タイプに対しても@c
1375 aFivePaper = \paper @{ paperheight = 21.0 \cm @}
1378 変数の内容次第では、変数は他の場所で使用することができます。@c
1379 以下の例は上の例の変数を使用しています:
1393 @subsection タイトルを付け加える
1394 @translationof Adding titles
1396 @cindex title (タイトル)
1397 @cindex headers (ヘッダ)
1398 @cindex header block (ヘッダ ブロック)
1403 タイトル、作曲者、作品番号、それに類似の情報は
1404 @code{\header} ブロックの中に挿入されます。@c
1405 これはメインの音楽表記の外に存在します。@c
1406 普通、@code{\header} ブロックはバージョン番号の下に置かれます。
1409 \version @w{"@version{}"}
1418 @dots{} music @dots{}
1422 ファイルが処理されると、タイトルと作曲者は楽譜の上に譜刻されます。@c
1423 タイトルについての更なる情報は、@ruser{Creating titles} を参照してください。
1428 @translationof Absolute note names
1430 @cindex note names (音符名)
1431 @cindex note names, absolute (絶対音符名)
1432 @cindex absolute mode (絶対モード)
1433 @cindex absolute values for pitches (ピッチの絶対値)
1434 @cindex pitches, absolute values (ピッチの絶対値)
1435 @cindex absolute note names (絶対音符名)
1437 これまで我々は常にピッチを定義するのに @code{\relative} を使ってきました。@c
1438 これはたいていの音楽を入力するのに最も容易な方法です。@c
1439 しかしながら、ピッチを定義するための方法がもう一つ存在します:
1442 あなたが @code{\relative} を省略した場合、LilyPond はすべてのピッチを@c
1444 @code{c'} は常にミドル C を意味し、@code{b} は常にミドル C の 1 音下の音符を@c
1445 意味し、@code{g,} は常にヘ音記号の譜表の最下段の譜線上にある音符を意味します。
1447 @lilypond[verbatim,quote]
1455 今度は 4 オクターブの音階があります:
1457 @lilypond[verbatim,quote]
1472 ト音記号に旋律を書く場合は多くのクォート @code{'} 記号が使用されることが@c
1474 モーツァルトからの以下の楽譜の断片について考えてみます:
1476 @lilypond[verbatim,quote]
1480 cis''8. d''16 cis''8 e''4 e''8 |
1481 b'8. cis''16 b'8 d''4 d''8 |
1485 これらすべてのクォート記号は入力ファイルを読みにくいものにして、@c
1487 @code{\relative} を使うことで、上の例はずっと読みやすく、入力しやすくなります:
1489 @lilypond[verbatim,quote]
1493 cis8. d16 cis8 e4 e8 |
1494 b8. cis16 b8 d4 d8 |
1498 @code{\relative} モードを使っているときにあなたがオクターブ記号 (@code{'} や
1499 @code{,}) を付け間違えた場合、すぐにわかります
1500 -- 多くの音符が間違ったオクターブに譜刻されます。@c
1501 絶対モードを使っているときに付け間違いをした場合、@c
1504 しかしながら、絶対モードは大きな音程を持つ音楽に対しては有用であり、@c
1505 LilyPond ファイルをコンピュータで生成する場合は非常に有用です。
1508 @node このチュートリアルの後にすべきこと
1509 @subsection このチュートリアルの後にすべきこと
1510 @translationof After the tutorial
1512 このチュートリアルを終えた後、あなたは楽譜を 1 つ、2 つ書いてみるべきです。@c
1513 @ref{テンプレート} にある楽譜の 1 つに音符を付け加えることから始めてください。@c
1514 あなたがこのチュートリアルではカバーされなかった記譜法を必要とする場合、@c
1515 @ruser{Musical notation} で始まる記譜法リファレンスを参照してください。@c
1516 あなたがテンプレートではカバーされていない楽器のアンサンブルのために@c
1517 楽譜を書こうとする場合、@ref{テンプレートを拡張する} を参照してください。
1519 あなたがいくつかの短い楽譜を書き終えた後は、@c
1520 学習マニュアルの残りの部分 (3~5 章) を読んでください。@c
1521 もちろん、今それらを読んでも何も問題はありません!@c
1522 しかしながら、学習マニュアルの残りの部分はあなたが LilyPond 入力に@c
1524 あなたはそれらの章を今すぐ一読し、もっと経験を積んだ後に読み直すことを@c
1527 このチュートリアルと学習マニュアルの残りの部分では、@c
1528 各セクションの最後に @strong{参照} があり、他のセクションを参照してます:
1529 初めて本書を読むときはこれらの参照を追うべきではありません。@c
1530 あなたが学習マニュアルをすべて読み終えたとき、いくつかのセクションを読み返し、@c
1531 さらに参照を追おうと思うかもしれません。
1533 @ref{マニュアルの概要} をまだ読んでいないのなら、@c
1534 それを @emph{読んでください}。@c
1535 LilyPond についての情報は多いため、新しく LilyPond を始める人はしばしば、@c
1536 必要な情報を得るためにどこを読むべきかわからないことがあります。@c
1537 5 分間使ってマニュアルの概要を注意深く読めば、@c
1538 あなたは何時間も見当違いの場所を読むフラストレーションを持たずに@c