1 @c -*- coding: utf-8; mode: texinfo; -*-
3 @chapter Regression tests
6 * Introduction to regression tests::
7 * Precompiled regression tests::
8 * Compiling regression tests::
10 * Finding the cause of a regression::
11 * Memory and coverage tests::
16 @node Introduction to regression tests
17 @section Introduction to regression tests
19 LilyPond has a complete suite of regression tests that are used
20 to ensure that changes to the code do not break existing behavior.
21 These regression tests comprise small LilyPond snippets that test
22 the functionality of each part of LilyPond.
24 Regression tests are added when new functionality is added to
25 LilyPond. They are also added when bugs are identified. The
26 snippet that causes the bug becomes a regression test to verify
27 that the bug has been fixed.
29 The regression tests are compiled using special @code{make}
30 targets. There are three primary uses for the regression
31 tests. First, successful completion of the regression tests means
32 that LilyPond has been properly built. Second, the output of the
33 regression tests can be manually checked to ensure that
34 the graphical output matches the description of the intended
35 output. Third, the regression test output from two different
36 versions of LilyPond can be automatically compared to identify
37 any differences. These differences should then be manually
38 checked to ensure that the differences are intended.
40 Regression tests (@qq{regtests}) are available in precompiled form
41 as part of the documentation. Regtests can also be compiled
42 on any machine that has a properly configured LilyPond build
46 @node Precompiled regression tests
47 @section Precompiled regression tests
49 @subheading Regression test output
51 As part of the release process, the regression tests are run
52 for every LilyPond release. Full regression test output is
53 available for every stable version and the most recent development
56 Regression test output is available in HTML and PDF format. Links
57 to the regression test output are available at the developer's
58 resources page for the version of interest.
60 The latest stable version of the regtests is found at:
63 @uref{http://lilypond.org/doc/stable/input/regression/collated-files.html}
66 The latest development version of the regtests is found at:
69 @uref{http://lilypond.org/doc/latest/input/regression/collated-files.html}
73 @subheading Regression test comparison
75 Each time a new version is released, the regtests are
76 compiled and the output is automatically compared with the
77 output of the previous release. The result of these
78 comparisons is archived online:
81 @uref{http://lilypond.org/test/}
84 Checking these pages is a very important task for the LilyPond project.
85 You are invited to report anything that looks broken, or any case
86 where the output quality is not on par with the previous release,
87 as described in @rweb{Bug reports}.
89 @warning{ The special regression test
90 @file{test-output-distance.ly} will always show up as a
91 regression. This test changes each time it is run, and serves to
92 verify that the regression tests have, in fact, run.}
95 @subheading What to look for
97 The test comparison shows all of the changes that occurred between
98 the current release and the prior release. Each test that has a
99 significant difference in output is displayed, with the old
100 version on the left and the new version on the right.
102 Regression tests whose output is the same for both versions are
103 not shown in the test comparison.
107 Images: green blurs in the new version show the approximate
108 location of elements in the old version.
110 There are often minor adjustments in spacing which do not indicate
114 Log files: show the difference in command-line output.
116 The main thing to examine are any changes in page counts -- if a
117 file used to fit on 1 page but now requires 4 or 5 pages,
118 something is suspicious!
121 Profile files: give information about
122 TODO? I don't know what they're for.
127 The automatic comparison of the regtests checks the LilyPond
128 bounding boxes. This means that Ghostscript changes and changes
129 in lyrics or text are not found.
132 @node Compiling regression tests
133 @section Compiling regression tests
135 Developers may wish to see the output of the complete regression
136 test suite for the current version of the source repository
137 between releases. Current source code is available; see
138 @ref{Working with source code}. Then you will need
139 to build the LilyPond binary; see @ref{Compiling LilyPond}.
141 Uninstalling the previous LilyPond version is not necessary, nor is
142 running @code{make install}, since the tests will automatically be
143 compiled with the LilyPond binary you have just built in your source
146 From this point, the regtests are compiled with:
152 If you have a multi-core machine you may want to use the @option{-j}
153 option and @var{CPU_COUT} variable, as
154 described in @ref{Saving time with CPU_COUNT}.
155 For a quad-core processor the complete command would be:
158 make -j5 CPU_COUNT=5 test
161 The regtest output will then be available in
162 @file{input/regression/out-test}.
163 @file{input/regression/out-test/collated-examples.html}
164 contains a listing of all the regression tests that were run,
165 but none of the images are included. Individual images are
166 also available in this directory.
168 The primary use of @samp{make@tie{}test} is to verify that the
169 regression tests all run without error. The regression test
170 page that is part of the documentation is created only when the
171 documentation is built, as described in @ref{Generating documentation}.
172 Note that building the documentation requires more installed components
173 than building the source code, as described in
174 @ref{Requirements for building documentation}.
177 @node Regtest comparison
178 @section Regtest comparison
180 Before modified code is committed to master, a regression test
181 comparison must be completed to ensure that the changes have
182 not caused problems with previously working code. The comparison
183 is made automatically upon compiling the regression test suite
189 Before making changes, a baseline should be established by
197 Make your changes, or apply the patch(es) to consider.
200 Compile the source with @samp{make} as usual.
203 Check for unintentional changes to the regtests:
209 After this has finished, a regression test comparison will be
213 out/test-results/index.html
216 For each regression test that differs between the baseline and the
217 changed code, a regression test entry will displayed. Ideally,
218 the only changes would be the changes that you were working on.
219 If regressions are introduced, they must be fixed before
223 The special regression test @file{test-output-distance.ly} will always
224 show up as a regression. This test changes each time it is run, and
225 serves to verify that the regression tests have, in fact, run.}
228 If you are happy with the results, then stop now.
230 If you want to continue programming, then make any additional code
231 changes, and continue.
234 Compile the source with @samp{make} as usual.
237 To re-check files that differed between the initial
238 @samp{make@tie{}test-baseline} and your post-changes
239 @samp{make@tie{}check}, run:
245 This updates the regression list at @file{out/test-results/index.html}.
246 It does @emph{not} redo @file{test-output-distance.ly}.
249 When all regressions have been resolved, the output list will be empty.
252 Once all regressions have been resolved, a final check should be completed
260 This cleans the results of the previous @samp{make@tie{}check}, then does the
261 automatic regression comparison again.
266 @node Finding the cause of a regression
267 @section Finding the cause of a regression
269 Git has special functionality to help tracking down the exact
270 commit which causes a problem. See the git manual page for
271 @code{git bisect}. This is a job that non-programmers can do,
272 although it requires familiarity with git, ability to compile
273 LilyPond, and generally a fair amount of technical knowledge. A
274 brief summary is given below, but you may need to consult other
275 documentation for in-depth explanations.
277 Even if you are not familiar with git or are not able to compile
278 LilyPond you can still help to narrow down the cause of a
279 regression simply by downloading the binary releases of different
280 LilyPond versions and testing them for the regression. Knowing
281 which version of LilyPond first exhibited the regression is
282 helpful to a developer as it shortens the @code{git bisect}
285 Once a problematic commit is identified, the programmers' job is
286 much easier. In fact, for most regression bugs, the majority of
287 the time is spent simply finding the problematic commit.
289 More information is in @ref{Regression tests}.
291 @subheading git bisect setup
293 We need to set up the bisect for each problem we want to
296 Suppose we have an input file which compiled in version 2.13.32,
297 but fails in version 2.13.38 and above.
308 Give it the earliest known bad tag:
311 git bisect bad release/2.13.38-1
314 (you can see tags with: @code{git tag} )
317 Give it the latest known good tag:
320 git bisect good release/2.13.32-1
323 You should now see something like:
325 Bisecting: 195 revisions left to test after this (roughly 8 steps)
326 [b17e2f3d7a5853a30f7d5a3cdc6b5079e77a3d2a] Web: Announcement
327 update for the new @qq{LilyPond Report}.
332 @subheading git bisect actual
344 Test your input file:
347 out/bin/lilypond test.ly
355 Does it crash, or is the output bad? If so:
362 Does your input file produce good output? If so:
371 Once the exact problem commit has been identified, git will inform
372 you with a message like:
375 6d28aebbaaab1be9961a00bf15a1ef93acb91e30 is the first bad commit
376 %%% ... blah blah blah ...
379 If there is still a range of commits, then git will automatically
380 select a new version for you to test. Go to step #1.
384 @subheading Recommendation: use two terminal windows
388 One window is open to the @code{build/} directory, and alternates
389 between these commands:
393 out/bin/lilypond test.ly
397 One window is open to the top source directory, and alternates
398 between these commands:
408 @node Memory and coverage tests
409 @section Memory and coverage tests
411 In addition to the graphical output of the regression tests, it is
412 possible to test memory usage and to determine how much of the source
413 code has been exercised by the tests.
415 @subheading Memory usage
417 For tracking memory usage as part of this test, you will need
418 GUILE CVS; especially the following patch:
419 @uref{http://www.lilypond.org/vc/old/gub.darcs/patches/guile-1.9-gcstats.patch}.
421 @subheading Code coverage
423 For checking the coverage of the test suite, do the following
426 ./scripts/auxiliar/build-coverage.sh
427 @emph{# uncovered files, least covered first}
428 ./scripts/auxiliar/coverage.py --summary out-cov/*.cc
429 @emph{# consecutive uncovered lines, longest first}
430 ./scripts/auxiliar/coverage.py --uncovered out-cov/*.cc
435 @section MusicXML tests
438 LilyPond comes with a complete set of regtests for the
439 @uref{http://www.musicxml.org/,MusicXML} language. Originally
440 developed to test @samp{musicxml2ly}, these regression tests
441 can be used to test any MusicXML implementation.
443 The MusicXML regression tests are found at
444 @file{input/regression/musicxml/}.
446 The output resulting from running these tests
447 through @samp{muscxml2ly} followed by @samp{lilypond} is
448 available in the LilyPond documentation:
451 @uref{http://lilypond.org/doc/latest/input/regression/musicxml/collated-files}