{ KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO } \
}
+
+#define KEYMAP_JP( \
+ K02, K32, K62, K22, K12, K52, K72, KA2, K92, K82, KB2, KE2, KF2, KD2, KC2, \
+ K03, K63, K23, K13, K53, K73, KA3, K93, K83, KB3, KE3, KF3, KD3, \
+ K06, K66, K26, K16, K56, K76, KA6, K96, K86, KB6, KE6, KF6, KD6, KC6, \
+ K05, K65, K25, K15, K55, K75, KA5, K95, K85, KB5, KE5, KF5, KD5, KC5, \
+ K04, K34, K64, K24, K14, K74, K94, K84, KB4, KE4, KF4, KD4, KC4 \
+) \
+{ \
+ { KC_NO, KC_NO, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K32, KC_NO, KC_##K34, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_NO, KC_##K55, KC_##K56, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K82, KC_##K83, KC_##K84, KC_##K85, KC_##K86, KC_NO }, \
+ { KC_NO, KC_NO, KC_##K92, KC_##K93, KC_##K94, KC_##K95, KC_##K96, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KA2, KC_##KA3, KC_NO, KC_##KA5, KC_##KA6, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KB2, KC_##KB3, KC_##KB4, KC_##KB5, KC_##KB6, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KC2, KC_NO, KC_##KC4, KC_##KC5, KC_##KC6, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KD2, KC_##KD3, KC_##KD4, KC_##KD5, KC_##KD6, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KE2, KC_##KE3, KC_##KE4, KC_##KE5, KC_##KE6, KC_NO }, \
+ { KC_NO, KC_NO, KC_##KF2, KC_##KF3, KC_##KF4, KC_##KF5, KC_##KF6, KC_NO } \
+}
+
#endif
*/
#include <stdint.h>
#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/interrupt.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "timer.h"
#include "matrix.h"
-
-
-// Timer resolution check
-#if (1000000/TIMER_RAW_FREQ > 20)
-# error "Timer resolution(>20us) is not enough for HHKB matrix scan tweak on V-USB."
-#endif
+#include "hhkb_avr.h"
// matrix state buffer(1:on, 0:off)
static matrix_row_t _matrix1[MATRIX_ROWS];
-// Matrix I/O ports
-//
-// row: HC4051[A,B,C] selects scan row0-7
-// col: LS145[A,B,C,D] selects scan col0-7 and enable(D)
-// key: on: 0/off: 1
-// prev: unknown: output previous key state(negated)?
-
-#if defined(__AVR_AT90USB1286__)
-// Ports for Teensy++
-// row: PB0-2
-// col: PB3-5,6
-// key: PE6(pull-uped)
-// prev: PE7
-#define KEY_INIT() do { \
- DDRB |= 0x7F; \
- DDRE |= (1<<7); \
- DDRE &= ~(1<<6); \
- PORTE |= (1<<6); \
-} while (0)
-#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
- ((ROW) & 0x07))
-#define KEY_ENABLE() (PORTB &= ~(1<<6))
-#define KEY_UNABLE() (PORTB |= (1<<6))
-#define KEY_STATE() (PINE & (1<<6))
-#define KEY_PREV_ON() (PORTE |= (1<<7))
-#define KEY_PREV_OFF() (PORTE &= ~(1<<7))
-#define KEY_POWER_ON()
-#define KEY_POWER_OFF()
-
-#elif defined(__AVR_ATmega32U4__)
-// Ports for my designed Alt Controller PCB
-// row: PB0-2
-// col: PB3-5,6
-// key: PD7(pull-uped)
-// prev: PB7
-// power: PD4(L:off/H:on)
-#define KEY_INIT() do { \
- DDRB = 0xFF; \
- PORTB = 0x00; \
- DDRD &= ~0x80; \
- PORTD |= 0x80; \
- /* keyswitch board power on */ \
- DDRD |= (1<<4); \
- PORTD |= (1<<4); \
- KEY_UNABLE(); \
- KEY_PREV_OFF(); \
-} while (0)
-#define KEY_SELECT(ROW, COL) (PORTB = (PORTB & 0xC0) | \
- (((COL) & 0x07)<<3) | \
- ((ROW) & 0x07))
-#define KEY_ENABLE() (PORTB &= ~(1<<6))
-#define KEY_UNABLE() (PORTB |= (1<<6))
-#define KEY_STATE() (PIND & (1<<7))
-#define KEY_PREV_ON() (PORTB |= (1<<7))
-#define KEY_PREV_OFF() (PORTB &= ~(1<<7))
-#define KEY_POWER_ON()
-#define KEY_POWER_OFF()
-/*
-#define KEY_POWER_ON() do { \
- KEY_INIT(); \
- PORTD |= (1<<4); \
- _delay_ms(1); \
-} while (0)
-#define KEY_POWER_OFF() do { \
- PORTD &= ~(1<<4); \
- DDRB &= ~0xFF; \
- PORTB &= ~0xFF; \
- DDRB &= ~0x80; \
- PORTB &= ~0x80; \
-} while (0)
-*/
-
-
-#elif defined(__AVR_ATmega328P__)
-// Ports for V-USB
-// key: PB0(pull-uped)
-// prev: PB1
-// row: PB2-4
-// col: PC0-2,3
-// power: PB5(Low:on/Hi-z:off)
-#define KEY_INIT() do { \
- DDRB |= 0x3E; \
- DDRB &= ~(1<<0); \
- PORTB |= 1<<0; \
- DDRC |= 0x0F; \
- KEY_UNABLE(); \
- KEY_PREV_OFF(); \
-} while (0)
-#define KEY_SELECT(ROW, COL) do { \
- PORTB = (PORTB & 0xE3) | ((ROW) & 0x07)<<2; \
- PORTC = (PORTC & 0xF8) | ((COL) & 0x07); \
-} while (0)
-#define KEY_ENABLE() (PORTC &= ~(1<<3))
-#define KEY_UNABLE() (PORTC |= (1<<3))
-#define KEY_STATE() (PINB & (1<<0))
-#define KEY_PREV_ON() (PORTB |= (1<<1))
-#define KEY_PREV_OFF() (PORTB &= ~(1<<1))
-// Power supply switching
-#define KEY_POWER_ON() do { \
- KEY_INIT(); \
- PORTB &= ~(1<<5); \
- _delay_ms(1); \
-} while (0)
-#define KEY_POWER_OFF() do { \
- DDRB &= ~0x3F; \
- PORTB &= ~0x3F; \
- DDRC &= ~0x0F; \
- PORTC &= ~0x0F; \
-} while (0)
-
-#else
-# error "define code for matrix scan"
-#endif
-
-
inline
uint8_t matrix_rows(void)
{
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
KEY_SELECT(row, col);
- _delay_us(40);
+ _delay_us(5);
// Not sure this is needed. This just emulates HHKB controller's behaviour.
if (matrix_prev[row] & (1<<col)) {
KEY_PREV_ON();
}
- _delay_us(7);
+ _delay_us(10);
// NOTE: KEY_STATE is valid only in 20us after KEY_ENABLE.
// If V-USB interrupts in this section we could lose 40us or so
matrix[row] = matrix_prev[row];
}
+ _delay_us(5);
KEY_PREV_OFF();
KEY_UNABLE();
+
// NOTE: KEY_STATE keep its state in 20us after KEY_ENABLE.
// This takes 25us or more to make sure KEY_STATE returns to idle state.
- _delay_us(150);
+ _delay_us(75);
}
}
KEY_POWER_OFF();
projects / tmk_firmware.git / commitdiff