Mkdir rn42

[tmk_firmware.git] / keyboard / hhkb_rn42 / MEMO.txt

diff --git a/keyboard/hhkb_rn42/MEMO.txt b/keyboard/hhkb_rn42/MEMO.txt
index 36d4afb98a96a7e4c5f70f1c4fd5010101b94fe1..100b4442d66fccd222bd27b52207b4795ab003a8 100644 (file)
--- a/keyboard/hhkb_rn42/MEMO.txt
+++ b/keyboard/hhkb_rn42/MEMO.txt
@@ -2,6 +2,7 @@ Roving RN-42
 ============
 07/16   After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
         Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
+07/18   On Linux, had an USB related trouble; keyobard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
 
 
 
@@ -28,6 +29,28 @@ DONE:
 - Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
 
 
+Lipo
+----
+Sparkfun Polymer Lithium Ion Battery 850mAh:
+https://www.sparkfun.com/products/341
+Lipo Cell spec:
+https://www.sparkfun.com/datasheets/Batteries/063048%20Li-polymer.pdf
+Protection spec:
+http://dlnmh9ip6v2uc.cloudfront.net/datasheets/Prototyping/BatteryProtection.pdf
+                            min     typical max
+over-charge                 4.255   4.280   4.305
+over-charge discover?       4.030   4.080   4.130        
+over-discharge              2.827   2.900   2.973
+over-discharge discover     3.022   3.100   3.178
+
+ADC voltage monitor:    voltage divider 10K+10K(0.5)
+    ADC=V*0.5/2.56*1024
+    V       ADC
+    ------------------
+    4.20    0x347(839)
+    3.10    0x26b(619)
+    
+
 
 
 Configuration