-t.m.k. Keyboard Firmware Collection
-====================================
-This is a keyboard firmware with some features for Atmel AVR controller.
+TMK Keyboard Firmware Collection
+================================
+This is a keyboard firmware with some useful features for Atmel AVR controller.
Source code is available here: <http://github.com/tmk/tmk_keyboard>
Features
--------
-* Mouse key - Mouse control by keyboard.
-* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up.
-* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc.
-* USB NKRO - Can send 120 keys(+ 8 modifiers) simultaneously.
-* PS/2 mouse support - integrate PS/2 mouse(TrackPoint) into keyboard as composite device.
-* keyboard protocols - PS/2, ADB and old keyboard protocols.
+These features can be used in your keyboard.
+
+* Multi-layer Keymap - Multiple keyboard layouts with layer switching
+* Mouse key - Mouse control with keyboard
+* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up
+* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
+* USB NKRO - 120 keys(+ 8 modifiers) simultaneously
+* PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device
+* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols
+* User Function - Customizable function of key with writing code
+* Macro - Very primitive at this time
+* Keyboard Tricks - Oneshot modifier and modifier with tapping feature
+* Debug Console - Messages for debug and interaction with firmware
+* Virtual DIP Switch - Configurations stored EEPROM(Boot Magic)
+* Locking CapsLock - Mechanical switch support for CapsLock
+* Breathing Sleep LED - Sleep indicator with charm during USB suspend
+* Backlight - Control backlight levels
Projects
--------
+You can find some keyboard specific projects under `converter` and `keyboard` directory.
+
### converter
-* ps2_usb - [PS/2 keyboard to USB][GH_ps2]
-* adb_usb - [ADB keyboard to USB][GH_adb]
-* m0110_usb - [Machintosh 128K/512K/Plus keyboard to USB][GH_m0110]
-* terminal_usb - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
-* news_usb - [Sony NEWS keyboard to USB][GH_news]
-* x68k_usb - [Sharp X68000 keyboard to USB][GH_x68k]
+* [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2]
+* [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb]
+* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
+* [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
+* [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news]
+* [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k]
+* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?)
+* [pc98_usb](converter/pc98_usb/) - [PC98] to USB
+* [usb_usb](converter/usb_usb/) - USB to USB(experimental)
+* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB
+* [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704]
### keyboard
-* hhkb - [Happy Hacking Keyboard professional][GH_hhkb]
-* macway - [Compact keyboard mod][GH_macway]
-* hbkb - [Happy Buckling sprint keyboard(IBM Model M mod)][GH_hbkb]
+* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
+* [gh60](keyboard/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
+* [hbkb](keyboard/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
+* [hid_liber](keyboard/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs)
+* [phantom](keyboard/phantom/) - [Phantom] keyboard (by Tranquilite)
+* [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung)
+* [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired]
+* [KMAC](keyboard/kmac/) - Korean custom keyboard
+* [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard
[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930
[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047
[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272
[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060
[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483
+[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0
+[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
+[Phantom]: http://geekhack.org/index.php?topic=26742
+[GH60]: http://geekhack.org/index.php?topic=34959
+[GH60_proto]: http://geekhack.org/index.php?topic=37570.0
+[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801
+[Sun]: http://en.wikipedia.org/wiki/Sun-3
+[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS
-Files & Directories
--------------------
-### Top
-* common/ - common codes
-* protocol/ - keyboard protocol support
-* keyboard/ - keyboard projects
-* converter/ - protocol converter projects
-* doc/ - documents
-* common.mk - Makefile for common
-* protoco.mk - Makefile for protocol
-* rules.mk - Makefile for build rules
+License
+-------
+**GPLv2** or later. Some protocol files are under **Modified BSD License**.
+LUFA, PJRC and V-USB stack have their own license respectively.
+
+
+
+Build Firmware and Program Controller
+-------------------------------------
+See [doc/build.md](doc/build.md).
+
+
+
+Change your keymap
+------------------
+See [doc/keymap.md](doc/keymap.md).
-### Keyboard Protocols
-* pjrc/ - PJRC USB stack
-* vusb/ - Objective Development V-USB
-* iwrap/ - Bluetooth HID for Bluegiga iWRAP
-* ps2.c - PS/2 protocol
-* adb.c - Apple Desktop Bus protocol
-* m0110.c - Macintosh 128K/512K/Plus keyboard protocol
-* news.c - Sony NEWS keyboard protocol
-* x68k.c - Sharp X68000 keyboard protocol
-Build & Program
----------------
-### Build firmware
-To compile you need `AVR GCC`, `AVR Libc` and `GNU make`.
-You can use [WinAVR][winavr] on Windows and [CrossPack][crosspack] on Mac.
+Magic Commands
+--------------
+To see help press `Magic` + `H`.
- $ cd <project>
- $ make
+ `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
-The firmware will be compiled as a file `tmk_<project>.hex`.
+Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
-[winavr]: http://winavr.sourceforge.net/
-[crosspack]: http://www.obdev.at/products/crosspack/index.html
+ ----- Command Help -----
+ c: enter console mode
+ d: toggle debug enable
+ x: toggle matrix debug
+ k: toggle keyboard debug
+ m: toggle mouse debug
+ v: print device version & info
+ t: print timer count
+ s: print status
+ e: print eeprom config
+ n: toggle NKRO
+ 0/F10: switch to Layer0
+ 1/F1: switch to Layer1
+ 2/F2: switch to Layer2
+ 3/F3: switch to Layer3
+ 4/F4: switch to Layer4
+ PScr: power down/remote wake-up
+ Caps: Lock Keyboard(Child Proof)
+ Paus: jump to bootloader
-### Program Controller
-If you have a proper program command in `Makefile` just type this.
+**TBD**
- $ make program
+### Boot Magic Configuration - Virtual DIP Switch
+Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
+Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
-As for `Teensy` you can use `PJRC's loader` to program hex file. <http://www.pjrc.com/teensy/loader.html>
+To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h).
+#### General
+- Skip reading EEPROM to start with default configuration(`ESC`)
+- Clear configuration stored in EEPROM to reset configuration(`Backspace`)
+#### Bootloader
+- Kick up Bootloader(`B`)
-Makefile Options
-----------------
-### 1. MCU and Frequency.
+#### Debug
+- Debug enable(`D`)
+- Debug matrix enable(`D`+`X`)
+- Debug keyboard enable(`D`+`K`)
+- Debug mouse enable(`D`+`M`)
- MCU = atmega32u4 # Teensy 2.0
- #MCU = at90usb1286 # Teensy++ 2.0
- F_CPU = 16000000
+#### Keymap
+- Swap Control and CapsLock(`Left Control`)
+- Change CapsLock to Control(`Caps Lock`)
+- Swap LeftAlt and Gui(`Left Alt`)
+- Swap RightAlt and Gui(`Right Alt`)
+- Disable Gui(`Left Gui`)
+- Swap Grave and Escape(`Grave`)
+- Swap BackSlash and BackSpace(`Back Slash`)
+- Enable NKRO on boot(`N`)
-### 2. Features
-Note that ***comment out*** to disable them.
+#### Default Layer
+- Set Default Layer to 0(`0`)
+- Set Default Layer to 1(`1`)
+- Set Default Layer to 2(`2`)
+- Set Default Layer to 3(`3`)
+- Set Default Layer to 4(`4`)
+- Set Default Layer to 5(`5`)
+- Set Default Layer to 6(`6`)
+- Set Default Layer to 7(`7`)
- MOUSEKEY_ENABLE = yes # Mouse keys
- PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
- EXTRAKEY_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
- NKRO_ENABLE = yes # USB Nkey Rollover
+#### Caution
+Unintentional use of this feature will cause user confusion.
-### 3. Programmer
-Set proper command for your controller, bootloader and programmer.
+TODO: Magic key combination to avoid unintentional press during plug in
- # for PJRC Teensy
- PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+**TBD**
- # for Atmel AT90USBKEY
- PROGRAM_CMD = dfu-programmer $(MCU) flash $(TARGET).hex
- # avrdude
- PROGRAM_CMD = avrdude -p $(MCU) -c avrispmkII -P USB -U flash:w:$(TARGET).hex
- PROGRAM_CMD = avrdude -p $(MCU) -c usbasp -U flash:w:$(TARGET).hex
- PROGRAM_CMD = avrdude -p $(MCU) -c arduino -P COM1 -b 57600 -U flash:w:$(TARGET).hex
+Mechanical Locking support
+--------------------------
+This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state.
+
+ #define LOCKING_SUPPORT_ENABLE
+ #define LOCKING_RESYNC_ENABLE
-config.h Options
-----------------
-### 1. USB vendor/product ID and device description
+
+Start Your Own Project
+-----------------------
+**TBD**
+### Config.h Options
+#### 1. USB vendor/product ID and device description
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xBEEF
- /* device description */
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
-### 2. Keyboard matrix configuration
+#### 2. Keyboard matrix configuration
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
#define MATRIX_HAS_GHOST
-### 3. Mouse keys
-### 4. PS/2 mouse
-### 5. COMMAND key combination
+Architecture
+------------
+ Architecture Diagram
+ +---------------+---------------+-------------+
+ | Host | Keyboard | Matrix, LED |
+ ___________ |-----------+-+ +-------------+ | +-----------|
+ / /| Keys/Mouse | Protocol |d| | Action | | | Protocol |
+ /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix |
+ |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________
+ || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /|
+ || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
+ ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / /
+ `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ /
+ |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/
+ +---------------------------------------------+ Keyboard
- #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)))
-Keymap
-------
+Debugging
+--------
+Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
+You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`.
-Build your own firmware
------------------------
-Debuging
---------
-Use PJRC's `hid_listen` to see debug messages and press `<COMMAND> + H` to debug menu.
-See `config.h` for definition of `<COMMAND>` key combination.
+Files and Directories
+-------------------
+### Top
+* common/ - common codes
+* protocol/ - keyboard protocol support
+* keyboard/ - keyboard projects
+* converter/ - protocol converter projects
+* doc/ - documents
+* common.mk - Makefile for common
+* protocol.mk - Makefile for protocol
+* rules.mk - Makefile for build rules
+### Common
+* host.h
+* host_driver.h
+* keyboard.h
+* command.h
+* keymap.h
+* action.h
+* keycode.h
+* matrix.h
+* led.h
+* mousekey.h
+* report.h
+* debug.h
+* print.h
+* bootloader.h
+* sendchar.h
+* timer.h
+* util.h
-Other Keyboard Projects
------------------------
-### PJRC USB Keyboard/Mouse Example
-- <http://www.pjrc.com/teensy/usb_keyboard.html>
-- <http://www.pjrc.com/teensy/usb_mouse.html>
+### Keyboard Protocols
+* lufa/ - LUFA USB stack
+* pjrc/ - PJRC USB stack
+* vusb/ - Objective Development V-USB
+* iwrap/ - Bluetooth HID for Bluegiga iWRAP
+* ps2.c - PS/2 protocol
+* adb.c - Apple Desktop Bus protocol
+* m0110.c - Macintosh 128K/512K/Plus keyboard protocol
+* news.c - Sony NEWS keyboard protocol
+* x68k.c - Sharp X68000 keyboard protocol
+* serial_soft.c - Asynchronous Serial protocol implemented by software
-### kbupgrade
-- <http://github.com/rhomann/kbupgrade>
-- <http://geekhack.org/showwiki.php?title=Island:8406>
-### c64key
-- <http://symlink.dk/projects/c64key/>
-### rump
-- <http://mg8.org/rump/>
-- <http://github.com/clee/rump>
+Coding Style
+-------------
+- Doesn't use Tab to indent, use 4-spaces instead.
-### dulcimer
-- <http://www.schatenseite.de/dulcimer.html>
-### humblehacker-keyboard
-- <http://github.com/humblehacker>
-- <http://www.humblehacker.com/keyboard/>
-- <http://geekhack.org/showwiki.php?title=Island:6292>
-### ps2avr
-- <http://sourceforge.net/projects/ps2avr/>
+Other Keyboard Firmware Projects
+------------------
+See [doc/other_projects.md](doc/other_projects.md).
projects / tmk_firmware.git / blobdiff