--- /dev/null
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER TheRoyalSweatshirt
+#define PRODUCT romac
+#define DESCRIPTION A *Plaid inspired twelve-key macropad
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 3
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F7, B1, B3 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+
+#define BACKLIGHT_LEVELS 0
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
--- /dev/null
+{
+ "keyboard_name": "RoMac",
+ "url": "",
+ "maintainer": "TheRoyalSweatshirt",
+ "width": 3,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 12,
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2018 Jack Humbert
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+
+#define _BASE 0
+#define _FN1 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [_BASE] = LAYOUT(
+ KC_7, KC_8, KC_9, \
+ KC_4, KC_5, KC_6, \
+ KC_1, KC_2, KC_3, \
+ MO(_FN1), KC_0, KC_ENT \
+ ),
+
+ [_FN1] = LAYOUT(
+ KC_TRNS, KC_HOME, KC_PGUP, \
+ KC_TRNS, KC_END, KC_PGDN, \
+ KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_DOT \
+ )
+};
--- /dev/null
+
+# RoMac
+
+
+
+A “Plaid” Inspired 12-Key (3x4) Macropad.
+
+- Keyboard Maintainer: [Garret G.](https://github.com/TheRoyalSweatshirt)
+- Hardware Supported: RoMac rev.1, rev.2, Pro Micro, Elite-C, Proton C, BlueMicro.
+- Hardware Availability: Through GB or Direct Message (If extra stock is available).
+
+Make example for this keyboard (after setting up your build environment):
+
+ make romac:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+#include "romac.h"
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ K00, K01, K02, \
+ K10, K11, K12, \
+ K20, K21, K22, \
+ K30, K31, K32 \
+) \
+{ \
+ { K00, K01, K02 }, \
+ { K10, K11, K12 }, \
+ { K20, K21, K22 }, \
+ { K30, K31, K32 } \
+}
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+
projects / qmk_firmware.git / commitdiff