Add support for Dimple, a 40% custom keyboard designed and produced by LazyDesigners.
--- /dev/null
+/*
+Copyright 2019 Erovia
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0040
+#define DEVICE_VER 0x0001
+#define MANUFACTURER LazyDesigners
+#define PRODUCT Dimple
+#define DESCRIPTION A 40% keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* RBG underglow */
+#define RGB_DI_PIN B7
+#ifdef RGB_DI_PIN
+ #define RGBLIGHT_ANIMATIONS
+ #define RGBLIGHT_SLEEP
+ #define RGBLED_NUM 50
+ /* #define RGBLIGHT_HUE_STEP 8 */
+ /* #define RGBLIGHT_SAT_STEP 8 */
+ /* #define RGBLIGHT_VAL_STEP 8 */
+#endif
+
+/* CapsLock LED */
+#define BACKLIGHT_PIN E6
+#ifdef BACKLIGHT_PIN
+ #define BACKLIGHT_LEVELS 6
+#endif
--- /dev/null
+/* Copyright 2019 Erovia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "dimple.h"
+
+void dimple_led_on() {
+ DDRE |= (1 << 6); PORTE &= ~(1 << 6);
+}
+
+void dimple_led_off() {
+ DDRE &= ~(1 << 6); PORTE &= ~(1 << 6);
+}
--- /dev/null
+/* Copyright 2019 Erovia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/*
+ * ,---------------------------------------------------------------.
+ * | | | | | | | | | | | | |
+ * |---------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |---------------------------------------------------------------|
+ * | | | | | | | | | | | |
+ * |---------------------------------------------------------------|
+ * | | | | | | | | |
+ * `-----------------------------------------------------'
+ */
+
+#define LAYOUT( \
+ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, \
+ K300, K302, K303, K304, K306, K307, K308, K309 \
+) { \
+ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \
+ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \
+ { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, KC_NO }, \
+ { K300, KC_NO, K302, K303, K304, KC_NO, K306, K307, K308, K309, KC_NO, KC_NO } \
+}
+
+
+void dimple_led_on(void);
+void dimple_led_off(void);
--- /dev/null
+{
+ "keyboard_name": "Dimple",
+ "url": "http://lazydesigners.cn",
+ "maintainer": "Erovia",
+ "width": 12.5,
+ "height": 4,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"label":"Esc", "x":0, "y":0},
+ {"label":"Q", "x":1, "y":0},
+ {"label":"W", "x":2, "y":0},
+ {"label":"E", "x":3, "y":0},
+ {"label":"R", "x":4, "y":0},
+ {"label":"T", "x":5, "y":0},
+ {"label":"Y", "x":6, "y":0},
+ {"label":"U", "x":7, "y":0},
+ {"label":"I", "x":8, "y":0},
+ {"label":"O", "x":9, "y":0},
+ {"label":"P", "x":10, "y":0},
+ {"label":"Back<br>Space", "x":11, "y":0, "w":1.5},
+ {"label":"Tab", "x":0, "y":1, "w":1.25},
+ {"label":"A", "x":1.25, "y":1},
+ {"label":"S", "x":2.25, "y":1},
+ {"label":"D", "x":3.25, "y":1},
+ {"label":"F", "x":4.25, "y":1},
+ {"label":"G", "x":5.25, "y":1},
+ {"label":"H", "x":6.25, "y":1},
+ {"label":"J", "x":7.25, "y":1},
+ {"label":"K", "x":8.25, "y":1},
+ {"label":"L", "x":9.25, "y":1},
+ {"label":"'", "x":10.25, "y":1},
+ {"label":"Enter", "x":11.25, "y":1, "w":1.25},
+ {"label":"Shift", "x":0, "y":2, "w":1.75},
+ {"label":"Z", "x":1.75, "y":2},
+ {"label":"X", "x":2.75, "y":2},
+ {"label":"C", "x":3.75, "y":2},
+ {"label":"V", "x":4.75, "y":2},
+ {"label":"B", "x":5.75, "y":2},
+ {"label":"N", "x":6.75, "y":2},
+ {"label":"M", "x":7.75, "y":2},
+ {"label":",", "x":8.75, "y":2},
+ {"label":"Up", "x":9.75, "y":2},
+ {"label":".", "x":10.75, "y":2, "w":1.75},
+ {"label":"Ctrl", "x":0.75, "y":3},
+ {"label":"Gui", "x":1.75, "y":3},
+ {"label":"Alt", "x":2.75, "y":3},
+ {"label":"Space", "x":3.75, "y":3, "w":2.25},
+ {"label":"Space", "x":6, "y":3, "w":2.75},
+ {"label":"Left", "x":8.75, "y":3},
+ {"label":"Down", "x":9.75, "y":3},
+ {"label":"Right", "x":10.75, "y":3}
+ ]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2019 Erovia
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+enum custom_layers {
+ _QWERTY,
+ _LOWER,
+ _RAISE,
+ _ADJUST
+};
+
+// Act as Shift on hold and as CapsLock on tap
+#define SFT_CPS LSFT_T(KC_CAPS)
+// Left space on tap, LOWER on hold
+#define SPC_LOW LT(_LOWER, KC_SPC)
+// Left space on tap, UPPER on hold
+#define SPC_UPR LT(_RAISE, KC_SPC)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/*
+ * ,---------------------------------------------------------------.
+ * |Esc | Q | W | E | R | T | Y | U | I | O | P | Bspc |
+ * |---------------------------------------------------------------|
+ * | Tab | A | S | D | F | G | H | J | K | L | ' |Enter |
+ * |---------------------------------------------------------------|
+ * | Shift | Z | X | C | V | B | N | M | , | Up | . |
+ * |---------------------------------------------------------------|
+ * |Ctrl|Gui |Alt | Spc/Lwr | Spc/Rse |Left|Down|Rght|
+ * `-----------------------------------------------------'
+ */
+
+ [_QWERTY] = LAYOUT(
+ KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT,
+ SFT_CPS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_UP, KC_DOT,
+ KC_LCTL, KC_LGUI, KC_LALT, SPC_LOW, SPC_UPR, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+/*
+ * ,---------------------------------------------------------------.
+ * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | |
+ * |---------------------------------------------------------------|
+ * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
+ * |---------------------------------------------------------------|
+ * | | F7 | F8 | F9 |F10 |F11 |F12 | | ; |PgUp| / |
+ * |---------------------------------------------------------------|
+ * | | | | | |Home|PgDn|End |
+ * `-----------------------------------------------------'
+ */
+
+ [_LOWER] = LAYOUT(
+ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_NO,
+ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
+ KC_NO, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_SCLN, KC_PGUP, KC_SLSH,
+ KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END
+ ),
+
+/*
+ * ,---------------------------------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | |
+ * |---------------------------------------------------------------|
+ * | Ins | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ * |---------------------------------------------------------------|
+ * | | F7 | F8 | F9 |F10 |F11 |F12 | | | | |
+ * |---------------------------------------------------------------|
+ * |VolD|Mute|VolU| | | | | |
+ * `-----------------------------------------------------'
+ */
+
+ [_RAISE] = LAYOUT(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO,
+ KC_INS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
+ KC_NO, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_VOLD, KC_MUTE, KC_VOLU, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_NO
+ ),
+
+/*
+ * ,---------------------------------------------------------------.
+ * |EEPR|RST | | | | | | | | | | |
+ * |---------------------------------------------------------------|
+ * | | | | | | | | | | | | |
+ * |---------------------------------------------------------------|
+ * | | | | | | | | | | | |
+ * |---------------------------------------------------------------|
+ * |RGB-|RGB |RGB+| | | | | |
+ * `-----------------------------------------------------'
+ */
+
+ [_ADJUST] = LAYOUT(
+ EEP_RST, RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
+ RGB_VAD, RGB_TOG, RGB_VAI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
+ ),
+};
+
+void led_set_user(uint8_t usb_led) {
+if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ dimple_led_on();
+ } else {
+ dimple_led_off();
+ }
+}
+
+uint32_t layer_state_set_user(uint32_t state) {
+ state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
+ switch (biton32(state)) {
+ case _LOWER:
+ rgblight_sethsv_noeeprom(HSV_GREEN);
+ break;
+ case _RAISE:
+ rgblight_sethsv_noeeprom(HSV_GOLD);
+ break;
+ case _ADJUST:
+ rgblight_sethsv_noeeprom(HSV_RED);
+ break;
+ default:
+ rgblight_sethsv_noeeprom(HSV_WHITE);
+ break;
+ }
+ return state;
+}
--- /dev/null
+# The default keymap for Dimple
+
+**Features**
+
+* Shift acts as CapsLock when tapped
+* Left space: space on tap, Lower layer on hold
+* Right space: space on tap, Raise layer on hold
+* Both space: Adjust layer on hold
+
+## QWERTY (Normal) Layer
+```
+ ,---------------------------------------------------------------.
+ |Esc | Q | W | E | R | T | Y | U | I | O | P | Bspc |
+ |---------------------------------------------------------------|
+ | Tab | A | S | D | F | G | H | J | K | L | ' |Enter |
+ |---------------------------------------------------------------|
+ | Shift | Z | X | C | V | B | N | M | , | Up | . |
+ |---------------------------------------------------------------|
+ |Ctrl|Gui |Alt | Spc/Lwr | Spc/Rse |Left|Down|Rght|
+ `-----------------------------------------------------'
+```
+
+## Lower Layer
+```
+ ,---------------------------------------------------------------.
+ | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | |
+ |---------------------------------------------------------------|
+ | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
+ |---------------------------------------------------------------|
+ | | F7 | F8 | F9 |F10 |F11 |F12 | | ; |PgUp| / |
+ |---------------------------------------------------------------|
+ | | | | | |Home|PgDn|End |
+ `-----------------------------------------------------'
+```
+
+## Raise Layer
+```
+ ,---------------------------------------------------------------.
+ | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | |
+ |---------------------------------------------------------------|
+ | Ins | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
+ |---------------------------------------------------------------|
+ | | F7 | F8 | F9 |F10 |F11 |F12 | | | | |
+ |---------------------------------------------------------------|
+ |VolD|Mute|VolU| | | | | |
+ `-----------------------------------------------------'
+```
+
+## Adjust Layer
+```
+,---------------------------------------------------------------.
+ |EEPR|RST | | | | | | | | | | |
+ |---------------------------------------------------------------|
+ | | | | | | | | | | | | |
+ |---------------------------------------------------------------|
+ | | | | | | | | | | | |
+ |---------------------------------------------------------------|
+ |RGB-|RGB |RGB+| | | | | |
+ `-----------------------------------------------------'
+```
--- /dev/null
+# Dimple
+
+
+
+A 40% custom keyboard designed and produced by [LazyDesigners](http://lazydesigners.cn).
+
+Keyboard Maintainer: [Erovia](https://github.com/Erovia)
+Hardware Supported: Dimple
+Hardware Availability: Check for GBs on [Geekhack](https://geekhack.org) and on [LazyDesigner's homepage.](http://lazydesigners.cn)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make lazydesigners/dimple:default:dfu
+
+To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+NKRO_ENABLE = yes # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
projects / qmk_firmware.git / commitdiff