OPT_DEFS += -include $(KEYBOARD_PATH_1)/bootloader_defs.h
else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h)","")
OPT_DEFS += -include $(KEYBOARD_PATH_1)/boards/$(BOARD)/bootloader_defs.h
+ else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h)","")
+ OPT_DEFS += -include $(TOP_DIR)/drivers/boards/$(BOARD)/bootloader_defs.h
endif
endif
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/**
+ * @brief PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ * This variable is used by the HAL when initializing the PAL driver.
+ */
+const PALConfig pal_default_config =
+{
+ .ports = {
+ {
+ /*
+ * PORTA setup.
+ *
+ * PTA4 - PIN33
+ * PTA5 - PIN24
+ * PTA12 - PIN3
+ * PTA13 - PIN4
+ *
+ * PTA18/19 crystal
+ * PTA0/3 SWD
+ */
+ .port = IOPORT1,
+ .pads = {
+ PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ },
+ },
+ {
+ /*
+ * PORTB setup.
+ *
+ * PTB0 - PIN16
+ * PTB1 - PIN17
+ * PTB2 - PIN19
+ * PTB3 - PIN18
+ * PTB16 - PIN0 - UART0_TX
+ * PTB17 - PIN1 - UART0_RX
+ * PTB18 - PIN32
+ * PTB19 - PIN25
+ */
+ .port = IOPORT2,
+ .pads = {
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ },
+ },
+ {
+ /*
+ * PORTC setup.
+ *
+ * PTC0 - PIN15
+ * PTC1 - PIN22
+ * PTC2 - PIN23
+ * PTC3 - PIN9
+ * PTC4 - PIN10
+ * PTC5 - PIN13
+ * PTC6 - PIN11
+ * PTC7 - PIN12
+ * PTC8 - PIN28
+ * PTC9 - PIN27
+ * PTC10 - PIN29
+ * PTC11 - PIN30
+ */
+ .port = IOPORT3,
+ .pads = {
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ },
+ },
+ {
+ /*
+ * PORTD setup.
+ *
+ * PTD0 - PIN2
+ * PTD1 - PIN14
+ * PTD2 - PIN7
+ * PTD3 - PIN8
+ * PTD4 - PIN6
+ * PTD5 - PIN20
+ * PTD6 - PIN21
+ * PTD7 - PIN5
+ */
+ .port = IOPORT4,
+ .pads = {
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ },
+ },
+ {
+ /*
+ * PORTE setup.
+ *
+ * PTE0 - PIN31
+ * PTE1 - PIN26
+ */
+ .port = IOPORT5,
+ .pads = {
+ PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
+ },
+ },
+ },
+};
+#endif
+
+// NOTE: This value comes from kiibohd/controller and is the location of a value
+// which needs to be checked before disabling the watchdog (which happens in
+// k20x_clock_init)
+#define WDOG_TMROUTL *(volatile uint16_t *)0x40052012
+
+/**
+ * @brief Early initialization code.
+ * @details This initialization must be performed just after stack setup
+ * and before any other initialization.
+ */
+void __early_init(void) {
+ // This is a dirty hack and should only be used as a temporary fix until this
+ // is upstreamed.
+ while (WDOG_TMROUTL < 2); // Must wait for WDOG timer if already running, before jumping
+
+ k20x_clock_init();
+}
+
+/**
+ * @brief Board-specific initialization code.
+ * @todo Add your board-specific code, if any.
+ */
+void boardInit(void) {
+}
--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the PJRC Teensy 3.1 board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_PJRC_TEENSY_3_1
+#define BOARD_NAME "PJRC Teensy 3.1"
+
+/* External 16 MHz crystal */
+#define KINETIS_XTAL_FREQUENCY 16000000UL
+
+/* Use internal capacitors for the crystal */
+#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P
+
+/*
+ * MCU type
+ */
+#define K20x7
+
+/*
+ * IO pins assignments.
+ */
+#define PORTA_PIN0 0
+#define PORTA_PIN1 1
+#define PORTA_PIN2 2
+#define PORTA_PIN3 3
+#define TEENSY_PIN33 4
+#define TEENSY_PIN24 5
+#define PORTA_PIN6 6
+#define PORTA_PIN7 7
+#define PORTA_PIN8 8
+#define PORTA_PIN9 9
+#define PORTA_PIN10 10
+#define PORTA_PIN11 11
+#define TEENSY_PIN3 12
+#define TEENSY_PIN4 13
+#define PORTA_PIN14 14
+#define PORTA_PIN15 15
+#define PORTA_PIN16 16
+#define PORTA_PIN17 17
+#define PORTA_PIN18 18
+#define PORTA_PIN19 19
+#define PORTA_PIN20 20
+#define PORTA_PIN21 21
+#define PORTA_PIN22 22
+#define PORTA_PIN23 23
+#define PORTA_PIN24 24
+#define PORTA_PIN25 25
+#define PORTA_PIN26 26
+#define PORTA_PIN27 27
+#define PORTA_PIN28 28
+#define PORTA_PIN29 29
+#define PORTA_PIN30 30
+#define PORTA_PIN31 31
+
+#define TEENSY_PIN3_IOPORT IOPORT1
+#define TEENSY_PIN4_IOPORT IOPORT1
+#define TEENSY_PIN24_IOPORT IOPORT1
+#define TEENSY_PIN33_IOPORT IOPORT1
+
+#define TEENSY_PIN16 0
+#define TEENSY_PIN17 1
+#define TEENSY_PIN19 2
+#define TEENSY_PIN18 3
+#define PORTB_PIN4 4
+#define PORTB_PIN5 5
+#define PORTB_PIN6 6
+#define PORTB_PIN7 7
+#define PORTB_PIN8 8
+#define PORTB_PIN9 9
+#define PORTB_PIN10 10
+#define PORTB_PIN11 11
+#define PORTB_PIN12 12
+#define PORTB_PIN13 13
+#define PORTB_PIN14 14
+#define PORTB_PIN15 15
+#define TEENSY_PIN0 16
+#define TEENSY_PIN1 17
+#define TEENSY_PIN32 18
+#define TEENSY_PIN25 19
+#define PORTB_PIN20 20
+#define PORTB_PIN21 21
+#define PORTB_PIN22 22
+#define PORTB_PIN23 23
+#define PORTB_PIN24 24
+#define PORTB_PIN25 25
+#define PORTB_PIN26 26
+#define PORTB_PIN27 27
+#define PORTB_PIN28 28
+#define PORTB_PIN29 29
+#define PORTB_PIN30 30
+#define PORTB_PIN31 31
+
+#define TEENSY_PIN0_IOPORT IOPORT2
+#define TEENSY_PIN1_IOPORT IOPORT2
+#define TEENSY_PIN16_IOPORT IOPORT2
+#define TEENSY_PIN17_IOPORT IOPORT2
+#define TEENSY_PIN18_IOPORT IOPORT2
+#define TEENSY_PIN19_IOPORT IOPORT2
+#define TEENSY_PIN25_IOPORT IOPORT2
+#define TEENSY_PIN32_IOPORT IOPORT2
+
+#define TEENSY_PIN15 0
+#define TEENSY_PIN22 1
+#define TEENSY_PIN23 2
+#define TEENSY_PIN9 3
+#define TEENSY_PIN10 4
+#define TEENSY_PIN13 5
+#define TEENSY_PIN11 6
+#define TEENSY_PIN12 7
+#define TEENSY_PIN28 8
+#define TEENSY_PIN27 9
+#define TEENSY_PIN29 10
+#define TEENSY_PIN30 11
+#define PORTC_PIN12 12
+#define PORTC_PIN13 13
+#define PORTC_PIN14 14
+#define PORTC_PIN15 15
+#define PORTC_PIN16 16
+#define PORTC_PIN17 17
+#define PORTC_PIN18 18
+#define PORTC_PIN19 19
+#define PORTC_PIN20 20
+#define PORTC_PIN21 21
+#define PORTC_PIN22 22
+#define PORTC_PIN23 23
+#define PORTC_PIN24 24
+#define PORTC_PIN25 25
+#define PORTC_PIN26 26
+#define PORTC_PIN27 27
+#define PORTC_PIN28 28
+#define PORTC_PIN29 29
+#define PORTC_PIN30 30
+#define PORTC_PIN31 31
+
+#define TEENSY_PIN9_IOPORT IOPORT3
+#define TEENSY_PIN10_IOPORT IOPORT3
+#define TEENSY_PIN11_IOPORT IOPORT3
+#define TEENSY_PIN12_IOPORT IOPORT3
+#define TEENSY_PIN13_IOPORT IOPORT3
+#define TEENSY_PIN15_IOPORT IOPORT3
+#define TEENSY_PIN22_IOPORT IOPORT3
+#define TEENSY_PIN23_IOPORT IOPORT3
+#define TEENSY_PIN27_IOPORT IOPORT3
+#define TEENSY_PIN28_IOPORT IOPORT3
+#define TEENSY_PIN29_IOPORT IOPORT3
+#define TEENSY_PIN30_IOPORT IOPORT3
+
+#define TEENSY_PIN2 0
+#define TEENSY_PIN14 1
+#define TEENSY_PIN7 2
+#define TEENSY_PIN8 3
+#define TEENSY_PIN6 4
+#define TEENSY_PIN20 5
+#define TEENSY_PIN21 6
+#define TEENSY_PIN5 7
+#define PORTD_PIN8 8
+#define PORTD_PIN9 9
+#define PORTD_PIN10 10
+#define PORTD_PIN11 11
+#define PORTD_PIN12 12
+#define PORTD_PIN13 13
+#define PORTD_PIN14 14
+#define PORTD_PIN15 15
+#define PORTD_PIN16 16
+#define PORTD_PIN17 17
+#define PORTD_PIN18 18
+#define PORTD_PIN19 19
+#define PORTD_PIN20 20
+#define PORTD_PIN21 21
+#define PORTD_PIN22 22
+#define PORTD_PIN23 23
+#define PORTD_PIN24 24
+#define PORTD_PIN25 25
+#define PORTD_PIN26 26
+#define PORTD_PIN27 27
+#define PORTD_PIN28 28
+#define PORTD_PIN29 29
+#define PORTD_PIN30 30
+#define PORTD_PIN31 31
+
+#define TEENSY_PIN2_IOPORT IOPORT4
+#define TEENSY_PIN5_IOPORT IOPORT4
+#define TEENSY_PIN6_IOPORT IOPORT4
+#define TEENSY_PIN7_IOPORT IOPORT4
+#define TEENSY_PIN8_IOPORT IOPORT4
+#define TEENSY_PIN14_IOPORT IOPORT4
+#define TEENSY_PIN20_IOPORT IOPORT4
+#define TEENSY_PIN21_IOPORT IOPORT4
+
+#define TEENSY_PIN31 0
+#define TEENSY_PIN26 1
+#define PORTE_PIN2 2
+#define PORTE_PIN3 3
+#define PORTE_PIN4 4
+#define PORTE_PIN5 5
+#define PORTE_PIN6 6
+#define PORTE_PIN7 7
+#define PORTE_PIN8 8
+#define PORTE_PIN9 9
+#define PORTE_PIN10 10
+#define PORTE_PIN11 11
+#define PORTE_PIN12 12
+#define PORTE_PIN13 13
+#define PORTE_PIN14 14
+#define PORTE_PIN15 15
+#define PORTE_PIN16 16
+#define PORTE_PIN17 17
+#define PORTE_PIN18 18
+#define PORTE_PIN19 19
+#define PORTE_PIN20 20
+#define PORTE_PIN21 21
+#define PORTE_PIN22 22
+#define PORTE_PIN23 23
+#define PORTE_PIN24 24
+#define PORTE_PIN25 25
+#define PORTE_PIN26 26
+#define PORTE_PIN27 27
+#define PORTE_PIN28 28
+#define PORTE_PIN29 29
+#define PORTE_PIN30 30
+#define PORTE_PIN31 31
+
+#define TEENSY_PIN26_IOPORT IOPORT5
+#define TEENSY_PIN31_IOPORT IOPORT5
+
+#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1)
+#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2)
+#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3)
+#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4)
+#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5)
+#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6)
+#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7)
+#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8)
+#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9)
+#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10)
+#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11)
+#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12)
+#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13)
+#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14)
+#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15)
+#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16)
+#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17)
+#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18)
+#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19)
+#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20)
+#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21)
+#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22)
+#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23)
+#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24)
+#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
+#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
+#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26)
+#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27)
+#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28)
+#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29)
+#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30)
+#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31)
+#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32)
+#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33)
+
+#define LINE_LED LINE_PIN13
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
--- /dev/null
+# List of all the board related files.
+BOARDSRC = $(BOARD_PATH)/boards/IC_TEENSY_3_1/board.c
+
+# Required include directories
+BOARDINC = $(BOARD_PATH)/boards/IC_TEENSY_3_1
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- * This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config =
-{
- .ports = {
- {
- /*
- * PORTA setup.
- *
- * PTA4 - PIN33
- * PTA5 - PIN24
- * PTA12 - PIN3
- * PTA13 - PIN4
- *
- * PTA18/19 crystal
- * PTA0/3 SWD
- */
- .port = IOPORT1,
- .pads = {
- PAL_MODE_ALTERNATIVE_7, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_ALTERNATIVE_7, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- },
- },
- {
- /*
- * PORTB setup.
- *
- * PTB0 - PIN16
- * PTB1 - PIN17
- * PTB2 - PIN19
- * PTB3 - PIN18
- * PTB16 - PIN0 - UART0_TX
- * PTB17 - PIN1 - UART0_RX
- * PTB18 - PIN32
- * PTB19 - PIN25
- */
- .port = IOPORT2,
- .pads = {
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_ALTERNATIVE_3, PAL_MODE_ALTERNATIVE_3,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- },
- },
- {
- /*
- * PORTC setup.
- *
- * PTC0 - PIN15
- * PTC1 - PIN22
- * PTC2 - PIN23
- * PTC3 - PIN9
- * PTC4 - PIN10
- * PTC5 - PIN13
- * PTC6 - PIN11
- * PTC7 - PIN12
- * PTC8 - PIN28
- * PTC9 - PIN27
- * PTC10 - PIN29
- * PTC11 - PIN30
- */
- .port = IOPORT3,
- .pads = {
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- },
- },
- {
- /*
- * PORTD setup.
- *
- * PTD0 - PIN2
- * PTD1 - PIN14
- * PTD2 - PIN7
- * PTD3 - PIN8
- * PTD4 - PIN6
- * PTD5 - PIN20
- * PTD6 - PIN21
- * PTD7 - PIN5
- */
- .port = IOPORT4,
- .pads = {
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL,
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- },
- },
- {
- /*
- * PORTE setup.
- *
- * PTE0 - PIN31
- * PTE1 - PIN26
- */
- .port = IOPORT5,
- .pads = {
- PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED,
- },
- },
- },
-};
-#endif
-
-// NOTE: This value comes from kiibohd/controller and is the location of a value
-// which needs to be checked before disabling the watchdog (which happens in
-// k20x_clock_init)
-#define WDOG_TMROUTL *(volatile uint16_t *)0x40052012
-
-/**
- * @brief Early initialization code.
- * @details This initialization must be performed just after stack setup
- * and before any other initialization.
- */
-void __early_init(void) {
- // This is a dirty hack and should only be used as a temporary fix until this
- // is upstreamed.
- while (WDOG_TMROUTL < 2); // Must wait for WDOG timer if already running, before jumping
-
- k20x_clock_init();
-}
-
-/**
- * @brief Board-specific initialization code.
- * @todo Add your board-specific code, if any.
- */
-void boardInit(void) {
-}
+++ /dev/null
-/*
- ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-/*
- * Setup for the PJRC Teensy 3.1 board.
- */
-
-/*
- * Board identifier.
- */
-#define BOARD_PJRC_TEENSY_3_1
-#define BOARD_NAME "PJRC Teensy 3.1"
-
-/* External 16 MHz crystal */
-#define KINETIS_XTAL_FREQUENCY 16000000UL
-
-/* Use internal capacitors for the crystal */
-#define KINETIS_BOARD_OSCILLATOR_SETTING OSC_CR_SC8P|OSC_CR_SC2P
-
-/*
- * MCU type
- */
-#define K20x7
-
-/*
- * IO pins assignments.
- */
-#define PORTA_PIN0 0
-#define PORTA_PIN1 1
-#define PORTA_PIN2 2
-#define PORTA_PIN3 3
-#define TEENSY_PIN33 4
-#define TEENSY_PIN24 5
-#define PORTA_PIN6 6
-#define PORTA_PIN7 7
-#define PORTA_PIN8 8
-#define PORTA_PIN9 9
-#define PORTA_PIN10 10
-#define PORTA_PIN11 11
-#define TEENSY_PIN3 12
-#define TEENSY_PIN4 13
-#define PORTA_PIN14 14
-#define PORTA_PIN15 15
-#define PORTA_PIN16 16
-#define PORTA_PIN17 17
-#define PORTA_PIN18 18
-#define PORTA_PIN19 19
-#define PORTA_PIN20 20
-#define PORTA_PIN21 21
-#define PORTA_PIN22 22
-#define PORTA_PIN23 23
-#define PORTA_PIN24 24
-#define PORTA_PIN25 25
-#define PORTA_PIN26 26
-#define PORTA_PIN27 27
-#define PORTA_PIN28 28
-#define PORTA_PIN29 29
-#define PORTA_PIN30 30
-#define PORTA_PIN31 31
-
-#define TEENSY_PIN3_IOPORT IOPORT1
-#define TEENSY_PIN4_IOPORT IOPORT1
-#define TEENSY_PIN24_IOPORT IOPORT1
-#define TEENSY_PIN33_IOPORT IOPORT1
-
-#define TEENSY_PIN16 0
-#define TEENSY_PIN17 1
-#define TEENSY_PIN19 2
-#define TEENSY_PIN18 3
-#define PORTB_PIN4 4
-#define PORTB_PIN5 5
-#define PORTB_PIN6 6
-#define PORTB_PIN7 7
-#define PORTB_PIN8 8
-#define PORTB_PIN9 9
-#define PORTB_PIN10 10
-#define PORTB_PIN11 11
-#define PORTB_PIN12 12
-#define PORTB_PIN13 13
-#define PORTB_PIN14 14
-#define PORTB_PIN15 15
-#define TEENSY_PIN0 16
-#define TEENSY_PIN1 17
-#define TEENSY_PIN32 18
-#define TEENSY_PIN25 19
-#define PORTB_PIN20 20
-#define PORTB_PIN21 21
-#define PORTB_PIN22 22
-#define PORTB_PIN23 23
-#define PORTB_PIN24 24
-#define PORTB_PIN25 25
-#define PORTB_PIN26 26
-#define PORTB_PIN27 27
-#define PORTB_PIN28 28
-#define PORTB_PIN29 29
-#define PORTB_PIN30 30
-#define PORTB_PIN31 31
-
-#define TEENSY_PIN0_IOPORT IOPORT2
-#define TEENSY_PIN1_IOPORT IOPORT2
-#define TEENSY_PIN16_IOPORT IOPORT2
-#define TEENSY_PIN17_IOPORT IOPORT2
-#define TEENSY_PIN18_IOPORT IOPORT2
-#define TEENSY_PIN19_IOPORT IOPORT2
-#define TEENSY_PIN25_IOPORT IOPORT2
-#define TEENSY_PIN32_IOPORT IOPORT2
-
-#define TEENSY_PIN15 0
-#define TEENSY_PIN22 1
-#define TEENSY_PIN23 2
-#define TEENSY_PIN9 3
-#define TEENSY_PIN10 4
-#define TEENSY_PIN13 5
-#define TEENSY_PIN11 6
-#define TEENSY_PIN12 7
-#define TEENSY_PIN28 8
-#define TEENSY_PIN27 9
-#define TEENSY_PIN29 10
-#define TEENSY_PIN30 11
-#define PORTC_PIN12 12
-#define PORTC_PIN13 13
-#define PORTC_PIN14 14
-#define PORTC_PIN15 15
-#define PORTC_PIN16 16
-#define PORTC_PIN17 17
-#define PORTC_PIN18 18
-#define PORTC_PIN19 19
-#define PORTC_PIN20 20
-#define PORTC_PIN21 21
-#define PORTC_PIN22 22
-#define PORTC_PIN23 23
-#define PORTC_PIN24 24
-#define PORTC_PIN25 25
-#define PORTC_PIN26 26
-#define PORTC_PIN27 27
-#define PORTC_PIN28 28
-#define PORTC_PIN29 29
-#define PORTC_PIN30 30
-#define PORTC_PIN31 31
-
-#define TEENSY_PIN9_IOPORT IOPORT3
-#define TEENSY_PIN10_IOPORT IOPORT3
-#define TEENSY_PIN11_IOPORT IOPORT3
-#define TEENSY_PIN12_IOPORT IOPORT3
-#define TEENSY_PIN13_IOPORT IOPORT3
-#define TEENSY_PIN15_IOPORT IOPORT3
-#define TEENSY_PIN22_IOPORT IOPORT3
-#define TEENSY_PIN23_IOPORT IOPORT3
-#define TEENSY_PIN27_IOPORT IOPORT3
-#define TEENSY_PIN28_IOPORT IOPORT3
-#define TEENSY_PIN29_IOPORT IOPORT3
-#define TEENSY_PIN30_IOPORT IOPORT3
-
-#define TEENSY_PIN2 0
-#define TEENSY_PIN14 1
-#define TEENSY_PIN7 2
-#define TEENSY_PIN8 3
-#define TEENSY_PIN6 4
-#define TEENSY_PIN20 5
-#define TEENSY_PIN21 6
-#define TEENSY_PIN5 7
-#define PORTD_PIN8 8
-#define PORTD_PIN9 9
-#define PORTD_PIN10 10
-#define PORTD_PIN11 11
-#define PORTD_PIN12 12
-#define PORTD_PIN13 13
-#define PORTD_PIN14 14
-#define PORTD_PIN15 15
-#define PORTD_PIN16 16
-#define PORTD_PIN17 17
-#define PORTD_PIN18 18
-#define PORTD_PIN19 19
-#define PORTD_PIN20 20
-#define PORTD_PIN21 21
-#define PORTD_PIN22 22
-#define PORTD_PIN23 23
-#define PORTD_PIN24 24
-#define PORTD_PIN25 25
-#define PORTD_PIN26 26
-#define PORTD_PIN27 27
-#define PORTD_PIN28 28
-#define PORTD_PIN29 29
-#define PORTD_PIN30 30
-#define PORTD_PIN31 31
-
-#define TEENSY_PIN2_IOPORT IOPORT4
-#define TEENSY_PIN5_IOPORT IOPORT4
-#define TEENSY_PIN6_IOPORT IOPORT4
-#define TEENSY_PIN7_IOPORT IOPORT4
-#define TEENSY_PIN8_IOPORT IOPORT4
-#define TEENSY_PIN14_IOPORT IOPORT4
-#define TEENSY_PIN20_IOPORT IOPORT4
-#define TEENSY_PIN21_IOPORT IOPORT4
-
-#define TEENSY_PIN31 0
-#define TEENSY_PIN26 1
-#define PORTE_PIN2 2
-#define PORTE_PIN3 3
-#define PORTE_PIN4 4
-#define PORTE_PIN5 5
-#define PORTE_PIN6 6
-#define PORTE_PIN7 7
-#define PORTE_PIN8 8
-#define PORTE_PIN9 9
-#define PORTE_PIN10 10
-#define PORTE_PIN11 11
-#define PORTE_PIN12 12
-#define PORTE_PIN13 13
-#define PORTE_PIN14 14
-#define PORTE_PIN15 15
-#define PORTE_PIN16 16
-#define PORTE_PIN17 17
-#define PORTE_PIN18 18
-#define PORTE_PIN19 19
-#define PORTE_PIN20 20
-#define PORTE_PIN21 21
-#define PORTE_PIN22 22
-#define PORTE_PIN23 23
-#define PORTE_PIN24 24
-#define PORTE_PIN25 25
-#define PORTE_PIN26 26
-#define PORTE_PIN27 27
-#define PORTE_PIN28 28
-#define PORTE_PIN29 29
-#define PORTE_PIN30 30
-#define PORTE_PIN31 31
-
-#define TEENSY_PIN26_IOPORT IOPORT5
-#define TEENSY_PIN31_IOPORT IOPORT5
-
-#define LINE_PIN1 PAL_LINE(TEENSY_PIN1_IOPORT, TEENSY_PIN1)
-#define LINE_PIN2 PAL_LINE(TEENSY_PIN2_IOPORT, TEENSY_PIN2)
-#define LINE_PIN3 PAL_LINE(TEENSY_PIN3_IOPORT, TEENSY_PIN3)
-#define LINE_PIN4 PAL_LINE(TEENSY_PIN4_IOPORT, TEENSY_PIN4)
-#define LINE_PIN5 PAL_LINE(TEENSY_PIN5_IOPORT, TEENSY_PIN5)
-#define LINE_PIN6 PAL_LINE(TEENSY_PIN6_IOPORT, TEENSY_PIN6)
-#define LINE_PIN7 PAL_LINE(TEENSY_PIN7_IOPORT, TEENSY_PIN7)
-#define LINE_PIN8 PAL_LINE(TEENSY_PIN8_IOPORT, TEENSY_PIN8)
-#define LINE_PIN9 PAL_LINE(TEENSY_PIN9_IOPORT, TEENSY_PIN9)
-#define LINE_PIN10 PAL_LINE(TEENSY_PIN10_IOPORT, TEENSY_PIN10)
-#define LINE_PIN11 PAL_LINE(TEENSY_PIN11_IOPORT, TEENSY_PIN11)
-#define LINE_PIN12 PAL_LINE(TEENSY_PIN12_IOPORT, TEENSY_PIN12)
-#define LINE_PIN13 PAL_LINE(TEENSY_PIN13_IOPORT, TEENSY_PIN13)
-#define LINE_PIN14 PAL_LINE(TEENSY_PIN14_IOPORT, TEENSY_PIN14)
-#define LINE_PIN15 PAL_LINE(TEENSY_PIN15_IOPORT, TEENSY_PIN15)
-#define LINE_PIN16 PAL_LINE(TEENSY_PIN16_IOPORT, TEENSY_PIN16)
-#define LINE_PIN17 PAL_LINE(TEENSY_PIN17_IOPORT, TEENSY_PIN17)
-#define LINE_PIN18 PAL_LINE(TEENSY_PIN18_IOPORT, TEENSY_PIN18)
-#define LINE_PIN19 PAL_LINE(TEENSY_PIN19_IOPORT, TEENSY_PIN19)
-#define LINE_PIN20 PAL_LINE(TEENSY_PIN20_IOPORT, TEENSY_PIN20)
-#define LINE_PIN21 PAL_LINE(TEENSY_PIN21_IOPORT, TEENSY_PIN21)
-#define LINE_PIN22 PAL_LINE(TEENSY_PIN22_IOPORT, TEENSY_PIN22)
-#define LINE_PIN23 PAL_LINE(TEENSY_PIN23_IOPORT, TEENSY_PIN23)
-#define LINE_PIN24 PAL_LINE(TEENSY_PIN24_IOPORT, TEENSY_PIN24)
-#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
-#define LINE_PIN25 PAL_LINE(TEENSY_PIN25_IOPORT, TEENSY_PIN25)
-#define LINE_PIN26 PAL_LINE(TEENSY_PIN26_IOPORT, TEENSY_PIN26)
-#define LINE_PIN27 PAL_LINE(TEENSY_PIN27_IOPORT, TEENSY_PIN27)
-#define LINE_PIN28 PAL_LINE(TEENSY_PIN28_IOPORT, TEENSY_PIN28)
-#define LINE_PIN29 PAL_LINE(TEENSY_PIN29_IOPORT, TEENSY_PIN29)
-#define LINE_PIN30 PAL_LINE(TEENSY_PIN30_IOPORT, TEENSY_PIN30)
-#define LINE_PIN31 PAL_LINE(TEENSY_PIN31_IOPORT, TEENSY_PIN31)
-#define LINE_PIN32 PAL_LINE(TEENSY_PIN32_IOPORT, TEENSY_PIN32)
-#define LINE_PIN33 PAL_LINE(TEENSY_PIN33_IOPORT, TEENSY_PIN33)
-
-#define LINE_LED LINE_PIN13
-
-#if !defined(_FROM_ASM_)
-#ifdef __cplusplus
-extern "C" {
-#endif
- void boardInit(void);
-#ifdef __cplusplus
-}
-#endif
-#endif /* _FROM_ASM_ */
-
-#endif /* _BOARD_H_ */
+++ /dev/null
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/K_TYPE_TEENSY_3_1/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/K_TYPE_TEENSY_3_1
# This board was copied from PJRC_TEENSY_3_1. The only difference should be a
# hack to ensure the watchdog has started before trying to disable it.
-BOARD = K_TYPE_TEENSY_3_1
+BOARD = IC_TEENSY_3_1
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
# - PJRC_TEENSY_3 for Teensy 3.0
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
# - MCHCK_K20 for Infinity KB
-BOARD = PJRC_TEENSY_3_1
+BOARD = IC_TEENSY_3_1
# Cortex version
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
+OPT_DEFS =
+
+DFU_ARGS = -d 1c11:b007
# Build Options
# comment out to disable the options.
VISUALIZER_ENABLE = yes
LED_DRIVER = is31fl3731c
-LED_WIDTH = 16
-LED_HEIGHT = 5
\ No newline at end of file
+LED_WIDTH = 16
+LED_HEIGHT = 5
else ifneq ("$(wildcard $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk)","")
BOARD_PATH = $(KEYBOARD_PATH_1)
BOARD_MK += $(KEYBOARD_PATH_1)/boards/$(BOARD)/board.mk
+else ifneq ("$(wildcard $(TOP_DIR)/drivers/boards/$(BOARD)/board.mk)","")
+ BOARD_PATH = $(TOP_DIR)/drivers
+ BOARD_MK += $(TOP_DIR)/drivers/boards/$(BOARD)/board.mk
endif
ifeq ("$(wildcard $(BOARD_MK))","")
projects / qmk_firmware.git / commitdiff