--- /dev/null
+/*
+Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include <stdint.h>
+#include "backlight_led.h"
+#include "quantum.h"
+// #include "led.h"
+
+
+#define T1H 900
+#define T1L 600
+#define T0H 400
+#define T0L 900
+#define RES 6000
+
+#define NS_PER_SEC (1000000000L)
+#define CYCLES_PER_SEC (F_CPU)
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+void send_bit_d4(bool bitVal)
+{
+ if(bitVal) {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (4),
+ [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+ } else {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (4),
+ [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+ }
+}
+
+void send_bit_d6(bool bitVal)
+{
+ if(bitVal) {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (6),
+ [onCycles] "I" (NS_TO_CYCLES(T1H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(T1L) - 2));
+ } else {
+ asm volatile (
+ "sbi %[port], %[bit] \n\t"
+ ".rept %[onCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ "cbi %[port], %[bit] \n\t"
+ ".rept %[offCycles] \n\t"
+ "nop \n\t"
+ ".endr \n\t"
+ ::
+ [port] "I" (_SFR_IO_ADDR(PORTD)),
+ [bit] "I" (6),
+ [onCycles] "I" (NS_TO_CYCLES(T0H) - 2),
+ [offCycles] "I" (NS_TO_CYCLES(T0L) - 2));
+ }
+}
+
+void show(void)
+{
+ _delay_us((RES / 1000UL) + 1);
+}
+
+void send_value(uint8_t byte, enum Device device)
+{
+ for(uint8_t b = 0; b < 8; b++) {
+ if(device == Device_STATELED) {
+ send_bit_d4(byte & 0b10000000);
+ }
+ if(device == Device_PCBRGB) {
+ send_bit_d6(byte & 0b10000000);
+ }
+ byte <<= 1;
+ }
+}
+
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device)
+{
+ send_value(g, device);
+ send_value(r, device);
+ send_value(b, device);
+}
--- /dev/null
+#ifndef BACKLIGHT_LED_H
+#define BACKLIGHT_LED_H
+
+enum Device {
+ Device_PCBRGB,
+ Device_STATELED
+};
+
+void backlight_init_ports(void);
+void backlight_set_state(bool cfg[7]);
+void backlight_update_state(void);
+void backlight_toggle_rgb(bool enabled);
+void backlight_set_rgb(uint8_t cfg[17][3]);
+void backlight_set(uint8_t level);
+void send_color(uint8_t r, uint8_t g, uint8_t b, enum Device device);
+void show(void);
+
+#endif
--- /dev/null
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6050
+#define DEVICE_VER 0x0104
+#define MANUFACTURER Duck
+#define PRODUCT Jetfire
+#define DESCRIPTION A custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 20
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+
+#define BACKLIGHT_LEVELS 1
+
+#define RGB_DI_PIN D6
+// #ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 23
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
+#endif
+*/
+
--- /dev/null
+{
+ "keyboard_name": "Jetfire",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 20.5,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"PrtSc", "x":16.5, "y":0}, {"label":"Scroll Lock", "x":17.5, "y":0}, {"label":"Pause", "x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Num Lock", "x":16.5, "y":1.25}, {"label":"/", "x":17.5, "y":1.25}, {"label":"*", "x":18.5, "y":1.25}, {"label":"-", "x":19.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"7", "x":16.5, "y":2.25}, {"label":"8", "x":17.5, "y":2.25}, {"label":"9", "x":18.5, "y":2.25}, {"label":"+", "x":19.5, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":16.5, "y":3.25}, {"label":"5", "x":17.5, "y":3.25}, {"label":"6", "x":18.5, "y":3.25}, {"x":19.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"label":"1", "x":16.5, "y":4.25}, {"label":"2", "x":17.5, "y":4.25}, {"label":"3", "x":18.5, "y":4.25}, {"label":"Enter", "x":19.5, "y":4.25}, {"label":"\u2191", "x":15.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25}, {"label":"Menu", "x":12, "y":5.25}, {"x":13, "y":5.25}, {"label":"0", "x":17.5, "y":5.25}, {"label":".", "x":18.5, "y":5.25}, {"x":19.5, "y":5.25}, {"label":"\u2190", "x":14.25, "y":5.5}, {"label":"\u2193", "x":15.25, "y":5.5}, {"label":"\u2192", "x":16.25, "y":5.5}]
+ },
+
+ "LAYOUT": {
+ "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"x":15.25, "y":0}, {"label":"PrtSc", "x":16.5, "y":0}, {"label":"Scroll Lock", "x":17.5, "y":0}, {"label":"Pause", "x":18.5, "y":0}, {"x":19.5, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Num Lock", "x":16.5, "y":1.25}, {"label":"/", "x":17.5, "y":1.25}, {"label":"*", "x":18.5, "y":1.25}, {"label":"-", "x":19.5, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"7", "x":16.5, "y":2.25}, {"label":"8", "x":17.5, "y":2.25}, {"label":"9", "x":18.5, "y":2.25}, {"label":"+", "x":19.5, "y":2.25, "h":2}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"4", "x":16.5, "y":3.25}, {"label":"5", "x":17.5, "y":3.25}, {"label":"6", "x":18.5, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"1", "x":16.5, "y":4.25}, {"label":"2", "x":17.5, "y":4.25}, {"label":"3", "x":18.5, "y":4.25}, {"label":"Enter", "x":19.5, "y":4.25, "h":2}, {"label":"\u2191", "x":15.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.5}, {"label":"0", "x":17.5, "y":5.25}, {"label":".", "x":18.5, "y":5.25}, {"label":"\u2190", "x":14.25, "y":5.5}, {"label":"\u2193", "x":15.25, "y":5.5}, {"label":"\u2192", "x":16.25, "y":5.5}]
+ }
+ }
+}
\ No newline at end of file
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "jetfire.h"
+#include "backlight_led.h"
+
+enum backlight_level {
+ BACKLIGHT_ALPHA = 0b0000001,
+ BACKLIGHT_MOD = 0b0000010,
+ BACKLIGHT_FROW = 0b0000100,
+ BACKLIGHT_NUMBLOCK = 0b0001000,
+ BACKLIGHT_RGB = 0b0010000,
+ BACKLIGHT_SWITCH = 0b0001111
+};
+
+enum StateLed {
+ STATE_LED_SCROLL_LOCK,
+ STATE_LED_CAPS_LOCK,
+ STATE_LED_NUM_LOCK,
+ STATE_LED_LAYER_0,
+ STATE_LED_LAYER_1,
+ STATE_LED_LAYER_2,
+ STATE_LED_LAYER_3,
+ STATE_LED_LAYER_4
+};
+
+uint8_t backlight_rgb_r = 255;
+uint8_t backlight_rgb_g = 0;
+uint8_t backlight_rgb_b = 0;
+uint8_t backlight_state_led = 1<<STATE_LED_LAYER_0;
+
+
+void backlight_toggle_rgb(bool enabled)
+{
+ if(enabled) {
+ uint8_t rgb[RGBLED_NUM][3] = {
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b},
+ {backlight_rgb_r, backlight_rgb_g, backlight_rgb_b}
+ };
+ backlight_set_rgb(rgb);
+ } else {
+ uint8_t rgb[RGBLED_NUM][3] = {
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0},
+ {0, 0, 0}
+ };
+ backlight_set_rgb(rgb);
+ }
+}
+
+void backlight_set_rgb(uint8_t cfg[RGBLED_NUM][3])
+{
+ cli();
+ for(uint8_t i = 0; i < RGBLED_NUM; ++i) {
+ send_color(cfg[i][0], cfg[i][1], cfg[i][2], Device_PCBRGB);
+ }
+ sei();
+ show();
+}
+
+
+void backlight_set(uint8_t level)
+{
+ level & BACKLIGHT_ALPHA ? (PORTB |= 0b00000010) : (PORTB &= ~0b00000010);
+ level & BACKLIGHT_MOD ? (PORTB |= 0b00000100) : (PORTB &= ~0b00000100);
+ level & BACKLIGHT_FROW ? (PORTB |= 0b00001000) : (PORTB &= ~0b00001000);
+ level & BACKLIGHT_NUMBLOCK ? (PORTE |= 0b01000000) : (PORTE &= ~0b01000000);
+ backlight_toggle_rgb(level & BACKLIGHT_RGB);
+}
+
+
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+
+void backlight_update_state()
+{
+ cli();
+ send_color(backlight_state_led & (1<<STATE_LED_SCROLL_LOCK) ? 255 : 0,
+ backlight_state_led & (1<<STATE_LED_CAPS_LOCK) ? 255 : 0,
+ backlight_state_led & (1<<STATE_LED_NUM_LOCK) ? 255 : 0,
+ Device_STATELED);
+ send_color(backlight_state_led & (1<<STATE_LED_LAYER_1) ? 255 : 0,
+ backlight_state_led & (1<<STATE_LED_LAYER_2) ? 255 : 0,
+ backlight_state_led & (1<<STATE_LED_LAYER_0) ? 255 : 0,
+ Device_STATELED);
+ send_color(backlight_state_led & (1<<STATE_LED_LAYER_4) ? 255 : 0,
+ backlight_state_led & (1<<STATE_LED_LAYER_3) ? 255 : 0,
+ 0,
+ Device_STATELED);
+ sei();
+ show();
+}
+
+void led_set_kb(uint8_t usb_led)
+{
+ if(usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ backlight_state_led |= 1<<STATE_LED_CAPS_LOCK;
+ } else {
+ backlight_state_led &= ~(1<<STATE_LED_CAPS_LOCK);
+ }
+ if(usb_led & (1<<USB_LED_SCROLL_LOCK)) {
+ backlight_state_led |= 1<<STATE_LED_SCROLL_LOCK;
+ } else {
+ backlight_state_led &= ~(1<<STATE_LED_SCROLL_LOCK);
+ }
+ if(usb_led & (1<<USB_LED_NUM_LOCK)) {
+ backlight_state_led |= 1<<STATE_LED_NUM_LOCK;
+ } else {
+ backlight_state_led &= ~(1<<STATE_LED_NUM_LOCK);
+ }
+ backlight_update_state();
+}
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef JETFIRE_H
+#define JETFIRE_H
+
+#include "quantum.h"
+
+// This a shortcut to help you visually see your layout.
+// The following is an example using the Planck MIT layout
+// The first section contains all of the arguments representing the physical
+// layout of the board and position of the keys
+// The second converts the arguments into a two-dimensional array which
+// represents the switch matrix.
+
+#define LAYOUT_all( \
+ K5A, K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T, \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3O, K3P, K3Q, K3R, K3S, K3T, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2O, K2Q, K2R, K2S, K2T, \
+ K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1M, K1N, K1O, K1P, K1Q, K1R, K1S, K1T, \
+ K0A, K0B, K0C, K0I, K0L, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, K0T \
+) { \
+ { K5A, KC_NO, K5C, K5D, K5E, K5F, KC_NO, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T }, \
+ { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, K4Q, K4R, K4S, K4T }, \
+ { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, KC_NO, K3O, K3P, K3Q, K3R, K3S, K3T }, \
+ { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, KC_NO, K2O, KC_NO, K2Q, K2R, K2S, K2T }, \
+ { K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, K1O, K1P, K1Q, K1R, K1S, K1T }, \
+ { K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO, K0L, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, K0T } \
+}
+
+#define LAYOUT( \
+ K5A, K5C, K5D, K5E, K5F, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T, \
+ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O, K4P, K4Q, K4R, K4S, K4T, \
+ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3O, K3P, K3Q, K3R, K3S, K3T, \
+ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2O, K2Q, K2R, K2S, \
+ K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1M, K1N, K1P, K1Q, K1R, K1S, K1T, \
+ K0A, K0B, K0C, K0I, K0M, K0N, K0O, K0P, K0Q, K0R, K0S \
+) { \
+ { K5A, KC_NO, K5C, K5D, K5E, K5F, KC_NO, K5H, K5I, K5J, K5K, K5L, K5M, K5N, K5O, K5P, K5Q, K5R, K5S, K5T }, \
+ { K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, KC_NO, K4O, K4P, K4Q, K4R, K4S, K4T }, \
+ { K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, KC_NO, K3O, K3P, K3Q, K3R, K3S, K3T }, \
+ { K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, KC_NO, K2O, KC_NO, K2Q, K2R, K2S, KC_NO }, \
+ { K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, KC_NO, K1M, K1N, KC_NO, K1P, K1Q, K1R, K1S, K1T }, \
+ { K0A, K0B, K0C, KC_NO,KC_NO,KC_NO,KC_NO,KC_NO, K0I, KC_NO,KC_NO,KC_NO, K0M, K0N, K0O, K0P, K0Q, K0R, K0S, KC_NO } \
+}
+
+#endif
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ // layer 0: qwerty
+ [0] = LAYOUT(\
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, KC_PGUP,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_COMM),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for jetfire
--- /dev/null
+/*
+Copyright 2016 Ralf Schmitt <ralf@bunkertor.net>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(uint8_t col);
+static void init_ports(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+ matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+ matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void backlight_init_ports(void)
+{
+ DDRD |= 0b01010000;
+ PORTD &= 0b10101111;
+ DDRB |= 0b00001110;
+ PORTB &= 0b11110001;
+ DDRE |= 0b01000000;
+ PORTE &= 0b10111111;
+}
+
+void matrix_init(void)
+{
+ backlight_init_ports();
+ unselect_cols();
+ init_ports();
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ matrix[i] = 0;
+ matrix_debouncing[i] = 0;
+ }
+}
+
+uint8_t matrix_scan(void)
+{
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ select_col(col);
+ _delay_us(3);
+ uint8_t rows = read_rows(col);
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+ bool curr_bit = rows & (1<<row);
+ if (prev_bit != curr_bit) {
+ matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+ if (debouncing) {
+ dprint("bounce!: "); dprintf("%02X", debouncing); dprintln();
+ }
+ debouncing = DEBOUNCING_DELAY;
+ }
+ }
+ unselect_cols();
+ }
+
+ if (debouncing) {
+ if (--debouncing) {
+ _delay_ms(1);
+ } else {
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ matrix[i] = matrix_debouncing[i];
+ }
+ }
+ }
+
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ if (debouncing) return false;
+ return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop32(matrix[i]);
+ }
+ return count;
+}
+
+static void init_ports(void)
+{
+ // Rows are inputs (inputs are 0)
+ DDRD &= 0b11010000;
+ DDRB &= 0b01111111;
+ DDRE &= 0b11111011;
+
+ // Columns are outputs (outputs are high)
+ DDRF |= 0b00000011;
+ DDRC |= 0b11000000;
+ DDRB |= 0b01110001;
+ DDRD |= 0b10000000;
+}
+
+static uint8_t read_rows(uint8_t col)
+{
+ if(col == 15) {
+ return (PINE&(1<<2) ? 0 : (1<<0)) |
+ (PIND&(1<<0) ? (1<<1) : 0) |
+ (PIND&(1<<1) ? (1<<2) : 0) |
+ (PIND&(1<<2) ? (1<<3) : 0) |
+ (PIND&(1<<3) ? (1<<4) : 0) |
+ (PIND&(1<<5) ? (1<<5) : 0);
+
+ } else {
+ return (PINB&(1<<7) ? (1<<0) : 0) |
+ (PIND&(1<<0) ? (1<<1) : 0) |
+ (PIND&(1<<1) ? (1<<2) : 0) |
+ (PIND&(1<<2) ? (1<<3) : 0) |
+ (PIND&(1<<3) ? (1<<4) : 0) |
+ (PIND&(1<<5) ? (1<<5) : 0);
+
+ }
+}
+
+static void unselect_cols(void)
+{
+ PORTF &= 0b11111100;
+ PORTC &= 0b00111111;
+ PORTB &= 0b10001110;
+ PORTD &= 0b01111111;
+}
+
+static void select_col(uint8_t col)
+{
+ switch (col) {
+ case 0:
+ PORTC |= 0b01000000;
+ break;
+ case 1:
+ PORTC |= 0b01000000;
+ PORTF |= 0b00000001;
+ break;
+ case 2:
+ PORTC |= 0b01000000;
+ PORTF |= 0b00000010;
+ break;
+ case 3:
+ PORTC |= 0b01000000;
+ PORTF |= 0b00000011;
+ break;
+ case 4:
+ PORTC |= 0b11000000;
+ break;
+ case 5:
+ PORTC |= 0b11000000;
+ PORTF |= 0b00000001;
+ break;
+ case 6:
+ PORTC |= 0b11000000;
+ PORTF |= 0b00000010;
+ break;
+ case 7:
+ PORTC |= 0b11000000;
+ PORTF |= 0b00000011;
+ break;
+ case 8:
+ PORTB |= 0b01000000;
+ break;
+ case 9:
+ PORTB |= 0b01000000;
+ PORTF |= 0b00000001;
+ break;
+ case 10:
+ PORTB |= 0b01000000;
+ PORTF |= 0b00000010;
+ break;
+ case 11:
+ PORTB |= 0b01000000;
+ PORTF |= 0b00000011;
+ break;
+ case 12:
+ PORTB |= 0b01000000;
+ PORTC |= 0b10000000;
+ break;
+ case 13:
+ PORTB |= 0b01000000;
+ PORTF |= 0b00000001;
+ PORTC |= 0b10000000;
+ break;
+ case 14:
+ PORTB |= 0b01000000;
+ PORTF |= 0b00000010;
+ PORTC |= 0b10000000;
+ break;
+ case 15:
+ PORTB |= 0b01000000;
+ PORTF |= 0b00000011;
+ PORTC |= 0b10000000;
+ break;
+ case 16:
+ PORTB |= 0b00100000;
+ break;
+ case 17:
+ PORTB |= 0b00010000;
+ break;
+ case 18:
+ PORTD |= 0b10000000;
+ break;
+ case 19:
+ PORTB |= 0b00000001;
+ break;
+ }
+}
\ No newline at end of file
--- /dev/null
+# Jetfire
+
+
+
+The Duck Jetfire is a hybrid full size and 1800 layout keyboard that went on
+Group Buy in November 2017.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: Duck Jetfire PCB
+Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=92708.0)
+
+To get into bootloader mode, hold the top top most key above the 2 navigation keys while connecting the USB cable.
+
+Make example for this keyboard (after setting up your build environment):
+
+ make jetfire:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- /dev/null
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = no # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+
+CUSTOM_MATRIX = yes
+SRC += backlight_led.c \
+ matrix.c
--- /dev/null
+# Duck Keyboards
+
+[Duck](http://duck0113.tistory.com/) is a popular Korean custom keyboard designer.
+Duck boards can only be bought new during a Group Buy and are commonly on a first come, first serve basis.
+
+**QMK is not the official firmware for Duck Keyboards.**
+
+For the official firmware, please use [OTD](http://kbdlab.co.kr/index.php?document_srl=100301&mid=board_sw).
+
+## QMK Powered Duck Boards
+Eagle V2
+Jetfire V1
+Lightsaver V3
+Octagon V1
+Octagon V2
+Viper V2
\ No newline at end of file
projects / qmk_firmware.git / commitdiff