--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
+ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
+ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Control layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t mods_pressed;
+
+ switch (id) {
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+ if (record->event.pressed) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Caps Fn Layout
+
+This is the default layout except that Caps Lock acts like Caps Lock when
+tapped but Fn when held.
#include "clueboard.h"
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// entirely and just use numbers.
#define _BL 0
#define _FL 1
-#define _RS 2
+#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Keymap _BL: (Base Layer) Default Layer
- * ,--------------------------------------------------------------------------. ,----.
- * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
- * |--------------------------------------------------------------------------| |----|
- * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
- * |--------------------------------------------------------------------------| `----'
- * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
- * |-----------------------------------------------------------------------------.
- * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
- * |------------------------------------------------------------------------|----|----.
- * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
- * `----------------------------------------------------------------------------------'
+ /* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
- * ,--------------------------------------------------------------------------. ,----.
- * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
- * |--------------------------------------------------------------------------| |----|
- * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
- * |--------------------------------------------------------------------------| `----'
- * | | | _RS| | | | | | | | | | | |
- * |-----------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | |PGUP|
- * |------------------------------------------------------------------------|----|----.
- * | | | | | | | | | | _FL|HOME|PGDN| END|
- * `----------------------------------------------------------------------------------'
*/
[_FL] = KEYMAP(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END),
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
+ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
+ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
- /* Keymap _RS: Reset layer
- * ,--------------------------------------------------------------------------. ,----.
- * | | | | | | | | | | | | | | | | | |
- * |--------------------------------------------------------------------------| |----|
- * | | | | |RESET| | | | | | | | | | | |
- * |--------------------------------------------------------------------------| `----'
- * | | | _RS| | | | | | | | | | | |
- * |-----------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |------------------------------------------------------------------------|----|----.
- * | | | | | | | | | | _FL| | | |
- * `----------------------------------------------------------------------------------'
+ /* Keymap _CL: Control layer
*/
-[_RS] = KEYMAP(
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \
- KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI),
-};
-
-enum function_id {
- SHIFT_ESC,
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
};
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(SHIFT_ESC),
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- static uint8_t shift_esc_shift_mask;
+ static uint8_t mods_pressed;
+
switch (id) {
- case SHIFT_ESC:
- shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
if (record->event.pressed) {
- if (shift_esc_shift_mask) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
send_keyboard_report();
}
} else {
- if (shift_esc_shift_mask) {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Default Clueboard Layout
+
+This is the default layout that comes flashed on every Clueboard. For the most
+part it's a straightforward and easy to follow layout. The only unusual key is
+the key in the upper left, which sends Escape normally, but Grave when any of
+the Ctrl, Alt, or GUI modifiers are held down.
--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
+ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Control layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t mods_pressed;
+
+ switch (id) {
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+ if (record->event.pressed) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Default Clueboard Layout for Mac
+
+This is the default Clueboard layout with Alt and GUI switched to match Mac
+conventions.
+++ /dev/null
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-# Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-# (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Build Options
-# change to "no" to disable the options, or define them in the makefile.mk in
-# the appropriate keymap folder that will get included automatically
-#
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
-
-ifndef QUANTUM_DIR
- include ../../../../Makefile
-endif
\ No newline at end of file
+++ /dev/null
-#include "clueboard.h"
-
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _BL 0
-#define _FL 1
-#define _RS 2
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Keymap _BL: (Base Layer) Default Layer
- * ,--------------------------------------------------------------------------. ,----.
- * | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp|
- * |--------------------------------------------------------------------------| |----|
- * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn|
- * |--------------------------------------------------------------------------| `----'
- * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
- * |-----------------------------------------------------------------------------.
- * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up|
- * |------------------------------------------------------------------------|----|----.
- * | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght|
- * `----------------------------------------------------------------------------------'
- */
-[_BL] = KEYMAP(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
- KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
- KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
- MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
- KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
-
- /* Keymap _FL: Function Layer
- * ,--------------------------------------------------------------------------. ,----.
- * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
- * |--------------------------------------------------------------------------| |----|
- * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
- * |--------------------------------------------------------------------------| `----'
- * | | | _RS| | | | | | | | | | | |
- * |-----------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | |PGUP|
- * |------------------------------------------------------------------------|----|----.
- * | | | | | | | | | | _FL|HOME|PGDN| END|
- * `----------------------------------------------------------------------------------'
- */
-[_FL] = KEYMAP(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END),
-
- /* Keymap _RS: Reset/Underlight layer
- * ,--------------------------------------------------------------------------. ,----.
- * | | | | | | | | | | | | | | | | | |
- * |--------------------------------------------------------------------------| |----|
- * | | | | |RESET| | | | | | | | | | | |
- * |--------------------------------------------------------------------------| `----'
- * | | | _RS| | | | | | | | | | | |
- * |-----------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |------------------------------------------------------------------------|----|----.
- * | | | | | | | | | | _FL| | | |
- * `----------------------------------------------------------------------------------'
- */
-[_RS] = KEYMAP(
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \
- KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \
- KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI),
-};
-
-/*enum function_id {
-};*/
-
-const uint16_t PROGMEM fn_actions[] = {
-};
-
-void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- switch (id) {
- }
-}
--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
+ KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, \
+ _______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Reset/Underlight layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+};
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Maximised Clueboard Layout
+
+This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac.
--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
+ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
+ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Control layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t mods_pressed;
+
+ switch (id) {
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+ if (record->event.pressed) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# MouseKeys Layout
+
+This layout adds a mouse layer. When you hold down the spacebar the arrow keys
+will move your mouse cursor. You can click using the 3 mods to the left of the
+arrow keys, or the 3 keys under your primary fingers on the home row.
--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ S(KC_GRV), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_GRV), KC_DEL, BL_STEP, \
+ S(KC_TAB), S(KC_Q), S(KC_W),S(KC_E),S(KC_R),S(KC_T), S(KC_Y), S(KC_U),S(KC_I),S(KC_O), S(KC_P), S(KC_LBRC),S(KC_RBRC),S(KC_BSLS), S(KC_PGDN), \
+ S(KC_LCTL),S(KC_A), MO(_CL),S(KC_D),S(KC_F),S(KC_G), S(KC_H), S(KC_J),S(KC_K),S(KC_L), S(KC_SCLN),S(KC_QUOT),S(KC_NUHS),S(KC_ENT), \
+ MO(_FL), S(KC_NUBS),S(KC_Z),S(KC_X),S(KC_C),S(KC_V), S(KC_B), S(KC_N),S(KC_M),S(KC_COMM),S(KC_DOT), S(KC_SLSH),S(KC_RO), KC_RSFT, KC_PGUP, \
+ KC_LCTL, KC_LALT, KC_LGUI,MO(_FL), S(KC_SPC),S(KC_SPC), MO(_FL), KC_RGUI, KC_RALT, KC_RCTL, KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Control layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t mods_pressed;
+
+ switch (id) {
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+ if (record->event.pressed) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Shift Fn Clueboard Layout
+
+This is an experimental layout. It makes the left shift key a dual roll key.
+For most keys it acts as a shift key, but for some keys it activates an
+alternate function instead. Primarily I use this to access the F-keys under
+the number rows.
#include "clueboard.h"
-// Used for SHIFT_ESC
-#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// entirely and just use numbers.
#define _BL 0
#define _FL 1
-#define _RS 2
+#define _CL 2
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Keymap _BL: (Base Layer) Default Layer
- * ,--------------------------------------------------------------------------. ,----.
- * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
- * |--------------------------------------------------------------------------| |----|
- * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
- * |--------------------------------------------------------------------------| `----'
- * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
- * |-----------------------------------------------------------------------------.
- * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
- * |------------------------------------------------------------------------|----|----.
- * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
- * `----------------------------------------------------------------------------------'
+ /* Keymap _BL: Base Layer (Default Layer)
*/
[_BL] = KEYMAP(
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
/* Keymap _FL: Function Layer
- * ,--------------------------------------------------------------------------. ,----.
- * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
- * |--------------------------------------------------------------------------| |----|
- * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
- * |--------------------------------------------------------------------------| `----'
- * | | | _RS| | | | | | | | | | | |
- * |-----------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | |PGUP|
- * |------------------------------------------------------------------------|----|----.
- * | | | | | | | | | | _FL|HOME|PGDN| END|
- * `----------------------------------------------------------------------------------'
*/
[_FL] = KEYMAP(
- KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
- KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \
- KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END),
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, BL_STEP, \
+ _______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, _______, \
+ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \
+ _______,_______,_______,MO(_FL), _______,_______, MO(_FL),_______,_______,MO(_FL),KC_HOME,KC_PGDN,KC_END),
- /* Keymap _RS: Reset layer
- * ,--------------------------------------------------------------------------. ,----.
- * | | | | | | | | | | | | | | | | | |
- * |--------------------------------------------------------------------------| |----|
- * | | | | |RESET| | | | | | | | | | | |
- * |--------------------------------------------------------------------------| `----'
- * | | | _RS| | | | | | | | | | | |
- * |-----------------------------------------------------------------------------.
- * | | | | | | | | | | | | | | | |
- * |------------------------------------------------------------------------|----|----.
- * | | | | | | | | | | _FL| | | |
- * `----------------------------------------------------------------------------------'
+ /* Keymap _CL: Control layer
*/
-[_RS] = KEYMAP(
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
- KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
- KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS),
-};
-
-enum function_id {
- SHIFT_ESC,
+[_CL] = KEYMAP(
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______,_______,_______,_______, _______,_______, _______,_______,_______,MO(_FL),_______, _______, _______),
};
const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_FUNCTION(SHIFT_ESC),
+ [0] = ACTION_FUNCTION(0),
};
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
- static uint8_t shift_esc_shift_mask;
+ static uint8_t mods_pressed;
+
switch (id) {
- case SHIFT_ESC:
- shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
if (record->event.pressed) {
- if (shift_esc_shift_mask) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
add_key(KC_GRV);
send_keyboard_report();
} else {
send_keyboard_report();
}
} else {
- if (shift_esc_shift_mask) {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
del_key(KC_GRV);
send_keyboard_report();
} else {
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
# skullY's Clueboard Layout
This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing.
--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, \
+ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
+ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Control layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t mods_pressed;
+
+ switch (id) {
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+ if (record->event.pressed) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Default Clueboard Layout
+
+This is the default layout except that Caps Lock has been changed to Control
+and Insert and Delete have been put into the Fn layer.
--- /dev/null
+#include "clueboard.h"
+
+// Helpful defines
+#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
+#define _______ KC_TRNS
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+#define _CL 2
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _BL: Base Layer (Default Layer)
+ */
+[_BL] = KEYMAP(
+ F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
+
+ /* Keymap _FL: Function Layer
+ */
+[_FL] = KEYMAP(
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
+ _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
+ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
+
+ /* Keymap _CL: Control layer
+ */
+[_CL] = KEYMAP(
+ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
+ _______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
+ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
+ MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
+ _______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
+};
+
+/* This is a list of user defined functions. F(N) corresponds to item N
+ of this list.
+ */
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_FUNCTION(0), // Calls action_function()
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ static uint8_t mods_pressed;
+
+ switch (id) {
+ case 0:
+ /* Handle the combined Grave/Esc key
+ */
+ mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
+
+ if (record->event.pressed) {
+ /* The key is being pressed.
+ */
+ if (mods_pressed) {
+ add_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ add_key(KC_ESC);
+ send_keyboard_report();
+ }
+ } else {
+ /* The key is being released.
+ */
+ if (mods_pressed) {
+ del_key(KC_GRV);
+ send_keyboard_report();
+ } else {
+ del_key(KC_ESC);
+ send_keyboard_report();
+ }
+ }
+ break;
+ }
+}
--- /dev/null
+```
+ ___ _____ _ _ _ __ __ _ __
+|__ \ / ____| | | | | | / / / /(_) / /
+ ||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
+ |/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
+ |_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
+ (_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
+```
+
+
+
+# Default Clueboard Layout
+
+This is the default layout that comes flashed on every Clueboard. For the most
+part it's a straightforward and easy to follow layout. The only unusual key is
+the key in the upper left, which sends Escape normally, but Grave when any of
+the Ctrl, Alt, or GUI modifiers are held down.
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
-EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
-COMMAND_ENABLE ?= yes # Commands for debug and configuration
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
AUDIO_ENABLE ?= no
-RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality
+RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
-BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
\ No newline at end of file
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
projects / qmk_firmware.git / commitdiff
