--- /dev/null
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6060
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Unikeyboard
+#define PRODUCT Felix
+#define DESCRIPTION 4x5 number/macropad.
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
+#define MATRIX_COL_PINS { B5, B4, E6, D7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* number of backlight levels */
+/* Not sure what pin controls the backlighting, need help for this. */
+#define BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/* there is no rgb underglow by default. */
+#define RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "felix.h"
--- /dev/null
+#ifndef FELIX_H
+#define FELIX_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+ K000, K001, K002, K003, \
+ K100, K101, K102, K103, \
+ K200, K201, K202, K203, \
+ K300, K301, K302, K303, \
+ K400, K401, K402, K403 \
+) { \
+ { K000, K001, K002, K003 }, \
+ { K100, K101, K102, K103 }, \
+ { K200, K201, K202, K203 }, \
+ { K300, K301, K302, K303 }, \
+ { K400, K401, K402, K403 } \
+}
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "felix.h"
+#include "action_layer.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ KEYMAP(
+ KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+ KC_P7, KC_P8, KC_P9, KC_PPLS,
+ KC_P4, KC_P5, KC_P6, KC_HOME,
+ KC_P1, KC_P2, KC_P3, KC_END,
+ KC_P0, KC_PEQL, KC_PDOT, KC_PENT),
+
+};
+
+void persistant_default_layer_set(uint16_t default_layer) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ }
+ return true;
+}
--- /dev/null
+# Felix
+
+A customizable number/macropad made by Unikeyboard.
+
+Keyboard Maintainer: [QMK Community](https://github.com/qmk)
+Hardware Supported: Felix PCB, Pro Micro
+Hardware Availability: [Unikeyboard](https://unikeyboard.io/product/felix/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make felix-default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
\ No newline at end of file
projects / qmk_firmware.git / commitdiff