--- /dev/null
+/*
+ ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for NK65 Keyboard
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_GENERIC_STM32_F303XC
+#define BOARD_NAME "NK65 PCB"
+
+/*
+ * Board oscillators-related settings.
+ * NOTE: LSE not fitted.
+ */
+#if !defined(STM32_LSECLK)
+#define STM32_LSECLK 0U
+#endif
+
+#define STM32_LSEDRV (3U << 3U)
+
+#if !defined(STM32_HSECLK)
+#define STM32_HSECLK 8000000U
+#endif
+
+// #define STM32_HSE_BYPASS
+
+/*
+ * MCU type as defined in the ST header.
+ */
+#define STM32F303xC
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_PIN0 0U
+#define GPIOA_PIN1 1U
+#define GPIOA_PIN2 2U
+#define GPIOA_PIN3 3U
+#define GPIOA_PIN4 4U
+#define GPIOA_PIN5 5U
+#define GPIOA_PIN6 6U
+#define GPIOA_PIN7 7U
+#define GPIOA_PIN8 8U
+#define GPIOA_PIN9 9U
+#define GPIOA_PIN10 10U
+#define GPIOA_USB_DM 11U
+#define GPIOA_USB_DP 12U
+#define GPIOA_SWDIO 13U
+#define GPIOA_SWCLK 14U
+#define GPIOA_PIN15 15U
+
+#define GPIOB_PIN0 0U
+#define GPIOB_PIN1 1U
+#define GPIOB_PIN2 2U
+#define GPIOB_PIN3 3U
+#define GPIOB_PIN4 4U
+#define GPIOB_PIN5 5U
+#define GPIOB_PIN6 6U
+#define GPIOB_PIN7 7U
+#define GPIOB_PIN8 8U
+#define GPIOB_PIN9 9U
+#define GPIOB_PIN10 10U
+#define GPIOB_PIN11 11U
+#define GPIOB_PIN12 12U
+#define GPIOB_PIN13 13U
+#define GPIOB_PIN14 14U
+#define GPIOB_PIN15 15U
+
+#define GPIOC_PIN0 0U
+#define GPIOC_PIN1 1U
+#define GPIOC_PIN2 2U
+#define GPIOC_PIN3 3U
+#define GPIOC_PIN4 4U
+#define GPIOC_PIN5 5U
+#define GPIOC_PIN6 6U
+#define GPIOC_PIN7 7U
+#define GPIOC_PIN8 8U
+#define GPIOC_PIN9 9U
+#define GPIOC_PIN10 10U
+#define GPIOC_PIN11 11U
+#define GPIOC_PIN12 12U
+#define GPIOC_PIN13 13U
+#define GPIOC_PIN14 14U
+#define GPIOC_PIN15 15U
+
+#define GPIOD_PIN0 0U
+#define GPIOD_PIN1 1U
+#define GPIOD_PIN2 2U
+#define GPIOD_PIN3 3U
+#define GPIOD_PIN4 4U
+#define GPIOD_PIN5 5U
+#define GPIOD_PIN6 6U
+#define GPIOD_PIN7 7U
+#define GPIOD_PIN8 8U
+#define GPIOD_PIN9 9U
+#define GPIOD_PIN10 10U
+#define GPIOD_PIN11 11U
+#define GPIOD_PIN12 12U
+#define GPIOD_PIN13 13U
+#define GPIOD_PIN14 14U
+#define GPIOD_PIN15 15U
+
+#define GPIOE_PIN0 0U
+#define GPIOE_PIN1 1U
+#define GPIOE_PIN2 2U
+#define GPIOE_PIN3 3U
+#define GPIOE_PIN4 4U
+#define GPIOE_PIN5 5U
+#define GPIOE_PIN6 6U
+#define GPIOE_PIN7 7U
+#define GPIOE_PIN8 8U
+#define GPIOE_PIN9 9U
+#define GPIOE_PIN10 10U
+#define GPIOE_PIN11 11U
+#define GPIOE_PIN12 12U
+#define GPIOE_PIN13 13U
+#define GPIOE_PIN14 14U
+#define GPIOE_PIN15 15U
+
+#define GPIOF_I2C2_SDA 0U
+#define GPIOF_I2C2_SCL 1U
+#define GPIOF_PIN2 2U
+#define GPIOF_PIN3 3U
+#define GPIOF_PIN4 4U
+#define GPIOF_PIN5 5U
+#define GPIOF_PIN6 6U
+#define GPIOF_PIN7 7U
+#define GPIOF_PIN8 8U
+#define GPIOF_PIN9 9U
+#define GPIOF_PIN10 10U
+#define GPIOF_PIN11 11U
+#define GPIOF_PIN12 12U
+#define GPIOF_PIN13 13U
+#define GPIOF_PIN14 14U
+#define GPIOF_PIN15 15U
+
+#define GPIOG_PIN0 0U
+#define GPIOG_PIN1 1U
+#define GPIOG_PIN2 2U
+#define GPIOG_PIN3 3U
+#define GPIOG_PIN4 4U
+#define GPIOG_PIN5 5U
+#define GPIOG_PIN6 6U
+#define GPIOG_PIN7 7U
+#define GPIOG_PIN8 8U
+#define GPIOG_PIN9 9U
+#define GPIOG_PIN10 10U
+#define GPIOG_PIN11 11U
+#define GPIOG_PIN12 12U
+#define GPIOG_PIN13 13U
+#define GPIOG_PIN14 14U
+#define GPIOG_PIN15 15U
+
+#define GPIOH_PIN0 0U
+#define GPIOH_PIN1 1U
+#define GPIOH_PIN2 2U
+#define GPIOH_PIN3 3U
+#define GPIOH_PIN4 4U
+#define GPIOH_PIN5 5U
+#define GPIOH_PIN6 6U
+#define GPIOH_PIN7 7U
+#define GPIOH_PIN8 8U
+#define GPIOH_PIN9 9U
+#define GPIOH_PIN10 10U
+#define GPIOH_PIN11 11U
+#define GPIOH_PIN12 12U
+#define GPIOH_PIN13 13U
+#define GPIOH_PIN14 14U
+#define GPIOH_PIN15 15U
+
+/*
+ * IO lines assignments.
+ */
+#define LINE_L3GD20_SDI PAL_LINE(GPIOA, 7U)
+#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
+#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
+#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
+#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
+
+#define LINE_PIN6 PAL_LINE(GPIOF, 0U)
+#define LINE_PIN7 PAL_LINE(GPIOF, 1U)
+
+#define LINE_CAPS_LOCK PAL_LINE(GPIOB, 7U)
+
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
+#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
+#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
+#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
+#define PIN_ODR_LOW(n) (0U << (n))
+#define PIN_ODR_HIGH(n) (1U << (n))
+#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
+#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
+#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
+#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
+#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
+#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
+#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
+#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
+#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
+#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
+
+/*
+ * GPIOA setup:
+ *
+ * PA0 - NC
+ * PA1 - NC
+ * PA2 - COL1
+ * PA3 - COL2
+ * PA4 - SPEAKER1
+ * PA5 - SPEAKER2
+ * PA6 - COL3
+ * PA7 - COL8
+ * PA8 - COL6
+ * PA9 - COL7
+ * PA10 - ROW5
+ * PA11 - USB_DM (alternate 14).
+ * PA12 - USB_DP (alternate 14).
+ * PA13 - SWDIO (alternate 0).
+ * PA14 - SWCLK (alternate 0).
+ * PA15 - ROW4
+ */
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \
+ PIN_MODE_ALTERNATE(GPIOA_PIN1) | \
+ PIN_MODE_INPUT(GPIOA_PIN2) | \
+ PIN_MODE_INPUT(GPIOA_PIN3) | \
+ PIN_MODE_INPUT(GPIOA_PIN4) | \
+ PIN_MODE_INPUT(GPIOA_PIN5) | \
+ PIN_MODE_INPUT(GPIOA_PIN6) | \
+ PIN_MODE_INPUT(GPIOA_PIN7) | \
+ PIN_MODE_INPUT(GPIOA_PIN8) | \
+ PIN_MODE_INPUT(GPIOA_PIN9) | \
+ PIN_MODE_INPUT(GPIOA_PIN10) | \
+ PIN_MODE_ALTERNATE(GPIOA_USB_DM) | \
+ PIN_MODE_ALTERNATE(GPIOA_USB_DP) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
+ PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
+ PIN_MODE_INPUT(GPIOA_PIN15))
+#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
+ PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
+#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \
+ PIN_OSPEED_HIGH(GPIOA_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOA_USB_DM) | \
+ PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
+ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
+ PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
+ PIN_OSPEED_VERYLOW(GPIOA_PIN15))
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_PIN0) | \
+ PIN_PUPDR_FLOATING(GPIOA_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
+ PIN_PUPDR_FLOATING(GPIOA_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
+ PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
+ PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
+ PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
+ PIN_PUPDR_PULLUP(GPIOA_PIN15))
+#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \
+ PIN_ODR_HIGH(GPIOA_PIN1) | \
+ PIN_ODR_HIGH(GPIOA_PIN2) | \
+ PIN_ODR_HIGH(GPIOA_PIN3) | \
+ PIN_ODR_HIGH(GPIOA_PIN4) | \
+ PIN_ODR_HIGH(GPIOA_PIN5) | \
+ PIN_ODR_HIGH(GPIOA_PIN6) | \
+ PIN_ODR_HIGH(GPIOA_PIN7) | \
+ PIN_ODR_HIGH(GPIOA_PIN8) | \
+ PIN_ODR_HIGH(GPIOA_PIN9) | \
+ PIN_ODR_HIGH(GPIOA_PIN10) | \
+ PIN_ODR_HIGH(GPIOA_USB_DM) | \
+ PIN_ODR_HIGH(GPIOA_USB_DP) | \
+ PIN_ODR_HIGH(GPIOA_SWDIO) | \
+ PIN_ODR_HIGH(GPIOA_SWCLK) | \
+ PIN_ODR_HIGH(GPIOA_PIN15))
+#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN1, 1) | \
+ PIN_AFIO_AF(GPIOA_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN5, 5) | \
+ PIN_AFIO_AF(GPIOA_PIN6, 5) | \
+ PIN_AFIO_AF(GPIOA_PIN7, 5))
+#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOA_USB_DM, 14) | \
+ PIN_AFIO_AF(GPIOA_USB_DP, 14) | \
+ PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
+ PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
+ PIN_AFIO_AF(GPIOA_PIN15, 0))
+
+/*
+ * GPIOB setup:
+ *
+ * PB0 - PIN0 (input pullup).
+ * PB1 - PIN1 (input pullup).
+ * PB2 - PIN2 (input pullup).
+ * PB3 - PIN3 (alternate 0).
+ * PB4 - PIN4 (input pullup).
+ * PB5 - PIN5 (input pullup).
+ * PB6 - PIN6 LSM303DLHC_SCL (alternate 4).
+ * PB7 - PIN7 LSM303DLHC_SDA (alternate 4).
+ * PB8 - PIN8 (input pullup).
+ * PB9 - PIN9 (input pullup).
+ * PB10 - PIN10 (input pullup).
+ * PB11 - PIN11 (input pullup).
+ * PB12 - PIN12 (input pullup).
+ * PB13 - PIN13 (input pullup).
+ * PB14 - PIN14 (input pullup).
+ * PB15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
+ PIN_MODE_INPUT(GPIOB_PIN1) | \
+ PIN_MODE_INPUT(GPIOB_PIN2) | \
+ PIN_MODE_ALTERNATE(GPIOB_PIN3) | \
+ PIN_MODE_INPUT(GPIOB_PIN4) | \
+ PIN_MODE_INPUT(GPIOB_PIN5) | \
+ PIN_MODE_ALTERNATE(GPIOB_PIN6) | \
+ PIN_MODE_OUTPUT(GPIOB_PIN7) | \
+ PIN_MODE_INPUT(GPIOB_PIN8) | \
+ PIN_MODE_INPUT(GPIOB_PIN9) | \
+ PIN_MODE_INPUT(GPIOB_PIN10) | \
+ PIN_MODE_INPUT(GPIOB_PIN11) | \
+ PIN_MODE_INPUT(GPIOB_PIN12) | \
+ PIN_MODE_INPUT(GPIOB_PIN13) | \
+ PIN_MODE_INPUT(GPIOB_PIN14) | \
+ PIN_MODE_INPUT(GPIOB_PIN15))
+#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
+ PIN_OTYPE_OPENDRAIN(GPIOB_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOB_PIN15))
+#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
+ PIN_OSPEED_HIGH(GPIOB_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOB_PIN15))
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
+ PIN_PUPDR_FLOATING(GPIOB_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
+ PIN_PUPDR_FLOATING(GPIOB_PIN6) | \
+ PIN_PUPDR_PULLDOWN(GPIOB_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOB_PIN15))
+#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
+ PIN_ODR_HIGH(GPIOB_PIN1) | \
+ PIN_ODR_HIGH(GPIOB_PIN2) | \
+ PIN_ODR_HIGH(GPIOB_PIN3) | \
+ PIN_ODR_HIGH(GPIOB_PIN4) | \
+ PIN_ODR_HIGH(GPIOB_PIN5) | \
+ PIN_ODR_HIGH(GPIOB_PIN6) | \
+ PIN_ODR_LOW(GPIOB_PIN7) | \
+ PIN_ODR_HIGH(GPIOB_PIN8) | \
+ PIN_ODR_HIGH(GPIOB_PIN9) | \
+ PIN_ODR_HIGH(GPIOB_PIN10) | \
+ PIN_ODR_HIGH(GPIOB_PIN11) | \
+ PIN_ODR_HIGH(GPIOB_PIN12) | \
+ PIN_ODR_HIGH(GPIOB_PIN13) | \
+ PIN_ODR_HIGH(GPIOB_PIN14) | \
+ PIN_ODR_HIGH(GPIOB_PIN15))
+#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN6, 4) | \
+ PIN_AFIO_AF(GPIOB_PIN7, 0))
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOB_PIN15, 0))
+
+/*
+ * GPIOC setup:
+ *
+ * PC0 - PIN0 (input pullup).
+ * PC1 - PIN1 (input pullup).
+ * PC2 - PIN2 (input pullup).
+ * PC3 - PIN3 (input pullup).
+ * PC4 - PIN4 (input pullup).
+ * PC5 - PIN5 (input pullup).
+ * PC6 - PIN6 (input pullup).
+ * PC7 - PIN7 (input pullup).
+ * PC8 - PIN8 (input pullup).
+ * PC9 - PIN9 (input pullup).
+ * PC10 - PIN10 (input pullup).
+ * PC11 - PIN11 (input pullup).
+ * PC12 - PIN12 (input pullup).
+ * PC13 - PIN13 (input pullup).
+ * PC14 - PIN14 (input floating).
+ * PC15 - PIN15 (input floating).
+ */
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \
+ PIN_MODE_INPUT(GPIOC_PIN1) | \
+ PIN_MODE_INPUT(GPIOC_PIN2) | \
+ PIN_MODE_INPUT(GPIOC_PIN3) | \
+ PIN_MODE_INPUT(GPIOC_PIN4) | \
+ PIN_MODE_INPUT(GPIOC_PIN5) | \
+ PIN_MODE_INPUT(GPIOC_PIN6) | \
+ PIN_MODE_INPUT(GPIOC_PIN7) | \
+ PIN_MODE_INPUT(GPIOC_PIN8) | \
+ PIN_MODE_INPUT(GPIOC_PIN9) | \
+ PIN_MODE_INPUT(GPIOC_PIN10) | \
+ PIN_MODE_INPUT(GPIOC_PIN11) | \
+ PIN_MODE_INPUT(GPIOC_PIN12) | \
+ PIN_MODE_INPUT(GPIOC_PIN13) | \
+ PIN_MODE_INPUT(GPIOC_PIN14) | \
+ PIN_MODE_INPUT(GPIOC_PIN15))
+#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOC_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOC_PIN14) | \
+ PIN_PUPDR_FLOATING(GPIOC_PIN15))
+#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \
+ PIN_ODR_HIGH(GPIOC_PIN1) | \
+ PIN_ODR_HIGH(GPIOC_PIN2) | \
+ PIN_ODR_HIGH(GPIOC_PIN3) | \
+ PIN_ODR_HIGH(GPIOC_PIN4) | \
+ PIN_ODR_HIGH(GPIOC_PIN5) | \
+ PIN_ODR_HIGH(GPIOC_PIN6) | \
+ PIN_ODR_HIGH(GPIOC_PIN7) | \
+ PIN_ODR_HIGH(GPIOC_PIN8) | \
+ PIN_ODR_HIGH(GPIOC_PIN9) | \
+ PIN_ODR_HIGH(GPIOC_PIN10) | \
+ PIN_ODR_HIGH(GPIOC_PIN11) | \
+ PIN_ODR_HIGH(GPIOC_PIN12) | \
+ PIN_ODR_HIGH(GPIOC_PIN13) | \
+ PIN_ODR_HIGH(GPIOC_PIN14) | \
+ PIN_ODR_HIGH(GPIOC_PIN15))
+#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN7, 0))
+#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOC_PIN15, 0))
+
+/*
+ * GPIOD setup:
+ *
+ * PD0 - PIN0 (input pullup).
+ * PD1 - PIN1 (input pullup).
+ * PD2 - PIN2 (input pullup).
+ * PD3 - PIN3 (input pullup).
+ * PD4 - PIN4 (input pullup).
+ * PD5 - PIN5 (input pullup).
+ * PD6 - PIN6 (input pullup).
+ * PD7 - PIN7 (input pullup).
+ * PD8 - PIN8 (input pullup).
+ * PD9 - PIN9 (input pullup).
+ * PD11 - PIN10 (input pullup).
+ * PD11 - PIN11 (input pullup).
+ * PD12 - PIN12 (input pullup).
+ * PD13 - PIN13 (input pullup).
+ * PD14 - PIN14 (input pullup).
+ * PD15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
+ PIN_MODE_INPUT(GPIOD_PIN1) | \
+ PIN_MODE_INPUT(GPIOD_PIN2) | \
+ PIN_MODE_INPUT(GPIOD_PIN3) | \
+ PIN_MODE_INPUT(GPIOD_PIN4) | \
+ PIN_MODE_INPUT(GPIOD_PIN5) | \
+ PIN_MODE_INPUT(GPIOD_PIN6) | \
+ PIN_MODE_INPUT(GPIOD_PIN7) | \
+ PIN_MODE_INPUT(GPIOD_PIN8) | \
+ PIN_MODE_INPUT(GPIOD_PIN9) | \
+ PIN_MODE_INPUT(GPIOD_PIN10) | \
+ PIN_MODE_INPUT(GPIOD_PIN11) | \
+ PIN_MODE_INPUT(GPIOD_PIN12) | \
+ PIN_MODE_INPUT(GPIOD_PIN13) | \
+ PIN_MODE_INPUT(GPIOD_PIN14) | \
+ PIN_MODE_INPUT(GPIOD_PIN15))
+#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
+#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOD_PIN15))
+#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOD_PIN15))
+#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
+ PIN_ODR_HIGH(GPIOD_PIN1) | \
+ PIN_ODR_HIGH(GPIOD_PIN2) | \
+ PIN_ODR_HIGH(GPIOD_PIN3) | \
+ PIN_ODR_HIGH(GPIOD_PIN4) | \
+ PIN_ODR_HIGH(GPIOD_PIN5) | \
+ PIN_ODR_HIGH(GPIOD_PIN6) | \
+ PIN_ODR_HIGH(GPIOD_PIN7) | \
+ PIN_ODR_HIGH(GPIOD_PIN8) | \
+ PIN_ODR_HIGH(GPIOD_PIN9) | \
+ PIN_ODR_HIGH(GPIOD_PIN10) | \
+ PIN_ODR_HIGH(GPIOD_PIN11) | \
+ PIN_ODR_HIGH(GPIOD_PIN12) | \
+ PIN_ODR_HIGH(GPIOD_PIN13) | \
+ PIN_ODR_HIGH(GPIOD_PIN14) | \
+ PIN_ODR_HIGH(GPIOD_PIN15))
+#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN7, 0))
+#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOD_PIN15, 0))
+
+/*
+ * GPIOE setup:
+ *
+ * PE0 - PIN0 (input pullup).
+ * PE1 - PIN1 (input pullup).
+ * PE2 - PIN2 (input pullup).
+ * PE3 - PIN3 L3GD20_CS (output pushpull maximum).
+ * PE4 - PIN4 (input pullup).
+ * PE5 - PIN5 (input pullup).
+ * PE6 - PIN6 (input pullup).
+ * PE7 - PIN7 (input pullup).
+ * PE8 - PIN8 (output pushpull maximum).
+ * PE9 - PIN9 (output pushpull maximum).
+ * PE10 - PIN10 (output pushpull maximum).
+ * PE11 - PIN11 (output pushpull maximum).
+ * PE12 - PIN12 (output pushpull maximum).
+ * PE13 - PIN13 (output pushpull maximum).
+ * PE14 - PIN14 (output pushpull maximum).
+ * PE15 - PIN15 (output pushpull maximum).
+ */
+#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
+ PIN_MODE_INPUT(GPIOE_PIN1) | \
+ PIN_MODE_INPUT(GPIOE_PIN2) |\
+ PIN_MODE_OUTPUT(GPIOE_PIN3) | \
+ PIN_MODE_INPUT(GPIOE_PIN4) |\
+ PIN_MODE_INPUT(GPIOE_PIN5) |\
+ PIN_MODE_INPUT(GPIOE_PIN6) | \
+ PIN_MODE_INPUT(GPIOE_PIN7) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN8) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN9) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN10) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN11) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN12) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN13) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN14) | \
+ PIN_MODE_OUTPUT(GPIOE_PIN15))
+#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN1) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN2) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN4) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN5) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN10) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN14) |\
+ PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
+#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN1) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN2) |\
+ PIN_OSPEED_HIGH(GPIOE_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN4) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN5) |\
+ PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN8) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN9) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN10) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN11) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN12) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN13) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN14) | \
+ PIN_OSPEED_HIGH(GPIOE_PIN15))
+#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN2) |\
+ PIN_PUPDR_FLOATING(GPIOE_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN4) |\
+ PIN_PUPDR_PULLUP(GPIOE_PIN5) |\
+ PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN13) | \
+ PIN_PUPDR_FLOATING(GPIOE_PIN14) |\
+ PIN_PUPDR_FLOATING(GPIOE_PIN15))
+#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
+ PIN_ODR_HIGH(GPIOE_PIN1) | \
+ PIN_ODR_HIGH(GPIOE_PIN2) | \
+ PIN_ODR_HIGH(GPIOE_PIN3) | \
+ PIN_ODR_HIGH(GPIOE_PIN4) | \
+ PIN_ODR_HIGH(GPIOE_PIN5) | \
+ PIN_ODR_HIGH(GPIOE_PIN6) | \
+ PIN_ODR_HIGH(GPIOE_PIN7) | \
+ PIN_ODR_LOW(GPIOE_PIN8) | \
+ PIN_ODR_LOW(GPIOE_PIN9) | \
+ PIN_ODR_LOW(GPIOE_PIN10) | \
+ PIN_ODR_LOW(GPIOE_PIN11) | \
+ PIN_ODR_LOW(GPIOE_PIN12) | \
+ PIN_ODR_LOW(GPIOE_PIN13) | \
+ PIN_ODR_LOW(GPIOE_PIN14) | \
+ PIN_ODR_LOW(GPIOE_PIN15))
+#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN2, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN4, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN5, 0) |\
+ PIN_AFIO_AF(GPIOE_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN7, 0))
+#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOE_PIN15, 0))
+
+/*
+ * GPIOF setup:
+ *
+ * PF0 - I2C2_SDA (input floating).
+ * PF1 - I2C2_SCL (input floating).
+ * PF2 - PIN2 (input pullup).
+ * PF3 - PIN3 (input pullup).
+ * PF4 - PIN4 (input pullup).
+ * PF5 - PIN5 (input pullup).
+ * PF6 - PIN6 (input pullup).
+ * PF7 - PIN7 (input pullup).
+ * PF8 - PIN8 (input pullup).
+ * PF9 - PIN9 (input pullup).
+ * PF10 - PIN10 (input pullup).
+ * PF11 - PIN11 (input pullup).
+ * PF12 - PIN12 (input pullup).
+ * PF13 - PIN13 (input pullup).
+ * PF14 - PIN14 (input pullup).
+ * PF15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_I2C2_SDA) | \
+ PIN_MODE_INPUT(GPIOF_I2C2_SCL) | \
+ PIN_MODE_INPUT(GPIOF_PIN2) | \
+ PIN_MODE_INPUT(GPIOF_PIN3) | \
+ PIN_MODE_INPUT(GPIOF_PIN4) | \
+ PIN_MODE_INPUT(GPIOF_PIN5) | \
+ PIN_MODE_INPUT(GPIOF_PIN6) | \
+ PIN_MODE_INPUT(GPIOF_PIN7) | \
+ PIN_MODE_INPUT(GPIOF_PIN8) | \
+ PIN_MODE_INPUT(GPIOF_PIN9) | \
+ PIN_MODE_INPUT(GPIOF_PIN10) | \
+ PIN_MODE_INPUT(GPIOF_PIN11) | \
+ PIN_MODE_INPUT(GPIOF_PIN12) | \
+ PIN_MODE_INPUT(GPIOF_PIN13) | \
+ PIN_MODE_INPUT(GPIOF_PIN14) | \
+ PIN_MODE_INPUT(GPIOF_PIN15))
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SDA) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_I2C2_SCL) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_I2C2_SDA) | \
+ PIN_OSPEED_HIGH(GPIOF_I2C2_SCL) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOF_PIN15))
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_I2C2_SDA) | \
+ PIN_PUPDR_FLOATING(GPIOF_I2C2_SCL) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOF_PIN15))
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_I2C2_SDA) | \
+ PIN_ODR_HIGH(GPIOF_I2C2_SCL) | \
+ PIN_ODR_HIGH(GPIOF_PIN2) | \
+ PIN_ODR_HIGH(GPIOF_PIN3) | \
+ PIN_ODR_HIGH(GPIOF_PIN4) | \
+ PIN_ODR_HIGH(GPIOF_PIN5) | \
+ PIN_ODR_HIGH(GPIOF_PIN6) | \
+ PIN_ODR_HIGH(GPIOF_PIN7) | \
+ PIN_ODR_HIGH(GPIOF_PIN8) | \
+ PIN_ODR_HIGH(GPIOF_PIN9) | \
+ PIN_ODR_HIGH(GPIOF_PIN10) | \
+ PIN_ODR_HIGH(GPIOF_PIN11) | \
+ PIN_ODR_HIGH(GPIOF_PIN12) | \
+ PIN_ODR_HIGH(GPIOF_PIN13) | \
+ PIN_ODR_HIGH(GPIOF_PIN14) | \
+ PIN_ODR_HIGH(GPIOF_PIN15))
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_I2C2_SDA, 0) | \
+ PIN_AFIO_AF(GPIOF_I2C2_SCL, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN7, 0))
+#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOF_PIN15, 0))
+
+/*
+ * GPIOG setup:
+ *
+ * PG0 - PIN0 (input pullup).
+ * PG1 - PIN1 (input pullup).
+ * PG2 - PIN2 (input pullup).
+ * PG3 - PIN3 (input pullup).
+ * PG4 - PIN4 (input pullup).
+ * PG5 - PIN5 (input pullup).
+ * PG6 - PIN6 (input pullup).
+ * PG7 - PIN7 (input pullup).
+ * PG8 - PIN8 (input pullup).
+ * PG9 - PIN9 (input pullup).
+ * PG10 - PIN10 (input pullup).
+ * PG11 - PIN11 (input pullup).
+ * PG12 - PIN12 (input pullup).
+ * PG13 - PIN13 (input pullup).
+ * PG14 - PIN14 (input pullup).
+ * PG15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \
+ PIN_MODE_INPUT(GPIOG_PIN1) | \
+ PIN_MODE_INPUT(GPIOG_PIN2) | \
+ PIN_MODE_INPUT(GPIOG_PIN3) | \
+ PIN_MODE_INPUT(GPIOG_PIN4) | \
+ PIN_MODE_INPUT(GPIOG_PIN5) | \
+ PIN_MODE_INPUT(GPIOG_PIN6) | \
+ PIN_MODE_INPUT(GPIOG_PIN7) | \
+ PIN_MODE_INPUT(GPIOG_PIN8) | \
+ PIN_MODE_INPUT(GPIOG_PIN9) | \
+ PIN_MODE_INPUT(GPIOG_PIN10) | \
+ PIN_MODE_INPUT(GPIOG_PIN11) | \
+ PIN_MODE_INPUT(GPIOG_PIN12) | \
+ PIN_MODE_INPUT(GPIOG_PIN13) | \
+ PIN_MODE_INPUT(GPIOG_PIN14) | \
+ PIN_MODE_INPUT(GPIOG_PIN15))
+#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOG_PIN15))
+#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOG_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOG_PIN15))
+#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOG_PIN15))
+#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \
+ PIN_ODR_HIGH(GPIOG_PIN1) | \
+ PIN_ODR_HIGH(GPIOG_PIN2) | \
+ PIN_ODR_HIGH(GPIOG_PIN3) | \
+ PIN_ODR_HIGH(GPIOG_PIN4) | \
+ PIN_ODR_HIGH(GPIOG_PIN5) | \
+ PIN_ODR_HIGH(GPIOG_PIN6) | \
+ PIN_ODR_HIGH(GPIOG_PIN7) | \
+ PIN_ODR_HIGH(GPIOG_PIN8) | \
+ PIN_ODR_HIGH(GPIOG_PIN9) | \
+ PIN_ODR_HIGH(GPIOG_PIN10) | \
+ PIN_ODR_HIGH(GPIOG_PIN11) | \
+ PIN_ODR_HIGH(GPIOG_PIN12) | \
+ PIN_ODR_HIGH(GPIOG_PIN13) | \
+ PIN_ODR_HIGH(GPIOG_PIN14) | \
+ PIN_ODR_HIGH(GPIOG_PIN15))
+#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN7, 0))
+#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOG_PIN15, 0))
+
+/*
+ * GPIOH setup:
+ *
+ * PH0 - PIN0 (input pullup).
+ * PH1 - PIN1 (input pullup).
+ * PH2 - PIN2 (input pullup).
+ * PH3 - PIN3 (input pullup).
+ * PH4 - PIN4 (input pullup).
+ * PH5 - PIN5 (input pullup).
+ * PH6 - PIN6 (input pullup).
+ * PH7 - PIN7 (input pullup).
+ * PH8 - PIN8 (input pullup).
+ * PH9 - PIN9 (input pullup).
+ * PH10 - PIN10 (input pullup).
+ * PH11 - PIN11 (input pullup).
+ * PH12 - PIN12 (input pullup).
+ * PH13 - PIN13 (input pullup).
+ * PH14 - PIN14 (input pullup).
+ * PH15 - PIN15 (input pullup).
+ */
+#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_PIN0) | \
+ PIN_MODE_INPUT(GPIOH_PIN1) | \
+ PIN_MODE_INPUT(GPIOH_PIN2) | \
+ PIN_MODE_INPUT(GPIOH_PIN3) | \
+ PIN_MODE_INPUT(GPIOH_PIN4) | \
+ PIN_MODE_INPUT(GPIOH_PIN5) | \
+ PIN_MODE_INPUT(GPIOH_PIN6) | \
+ PIN_MODE_INPUT(GPIOH_PIN7) | \
+ PIN_MODE_INPUT(GPIOH_PIN8) | \
+ PIN_MODE_INPUT(GPIOH_PIN9) | \
+ PIN_MODE_INPUT(GPIOH_PIN10) | \
+ PIN_MODE_INPUT(GPIOH_PIN11) | \
+ PIN_MODE_INPUT(GPIOH_PIN12) | \
+ PIN_MODE_INPUT(GPIOH_PIN13) | \
+ PIN_MODE_INPUT(GPIOH_PIN14) | \
+ PIN_MODE_INPUT(GPIOH_PIN15))
+#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_PIN0) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN1) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \
+ PIN_OTYPE_PUSHPULL(GPIOH_PIN15))
+#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOH_PIN0) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN1) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN2) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN3) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN4) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN5) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN6) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN7) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN8) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN9) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN10) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN11) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN12) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN13) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN14) | \
+ PIN_OSPEED_VERYLOW(GPIOH_PIN15))
+#define VAL_GPIOH_PUPDR (PIN_PUPDR_PULLUP(GPIOH_PIN0) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN1) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN2) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN3) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN4) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN5) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN6) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN7) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN8) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN9) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN10) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN11) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN12) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN13) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN14) | \
+ PIN_PUPDR_PULLUP(GPIOH_PIN15))
+#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_PIN0) | \
+ PIN_ODR_HIGH(GPIOH_PIN1) | \
+ PIN_ODR_HIGH(GPIOH_PIN2) | \
+ PIN_ODR_HIGH(GPIOH_PIN3) | \
+ PIN_ODR_HIGH(GPIOH_PIN4) | \
+ PIN_ODR_HIGH(GPIOH_PIN5) | \
+ PIN_ODR_HIGH(GPIOH_PIN6) | \
+ PIN_ODR_HIGH(GPIOH_PIN7) | \
+ PIN_ODR_HIGH(GPIOH_PIN8) | \
+ PIN_ODR_HIGH(GPIOH_PIN9) | \
+ PIN_ODR_HIGH(GPIOH_PIN10) | \
+ PIN_ODR_HIGH(GPIOH_PIN11) | \
+ PIN_ODR_HIGH(GPIOH_PIN12) | \
+ PIN_ODR_HIGH(GPIOH_PIN13) | \
+ PIN_ODR_HIGH(GPIOH_PIN14) | \
+ PIN_ODR_HIGH(GPIOH_PIN15))
+#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_PIN0, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN1, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN2, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN3, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN4, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN5, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN6, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN7, 0))
+#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN9, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN10, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN11, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN12, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN13, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN14, 0) | \
+ PIN_AFIO_AF(GPIOH_PIN15, 0))
+
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+// #define usb_lld_connect_bus(usbp)
+#define usb_lld_connect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_ALTERNATE(14)))
+// #define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT)
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+// #define usb_lld_disconnect_bus(usbp)
+#define usb_lld_disconnect_bus(usbp) (palSetPadMode(GPIOA, GPIOA_USB_DP, PAL_MODE_OUTPUT_PUSHPULL)); palClearPad(GPIOA, GPIOA_USB_DP)
+// #define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12)
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
*/
#if RGB_BACKLIGHT_ENABLED
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_ZEAL65) || defined (RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60)
+#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65) || defined(RGB_BACKLIGHT_M60_A) || defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_KOYU) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
#else
-#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU
+#error None of the following was defined: RGB_BACKLIGHT_ZEAL60, RGB_BACKLIGHT_ZEAL65, RGB_BACKLIGHT_M60_A, RGB_BACKLIGHT_M6_B, RGB_BACKLIGHT_KOYU, RGB_BACKLIGHT_HS60, RGB_BACKLIGHT_NK65
#endif
#ifndef MAX
#include "rgb_backlight_api.h"
#include "rgb_backlight_keycodes.h"
-#if !defined(RGB_BACKLIGHT_HS60)
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
#include <avr/io.h>
#include <util/delay.h>
#include <avr/interrupt.h>
#include "progmem.h"
#include "quantum/color.h"
-#if defined (RGB_BACKLIGHT_M6_B)
+#if defined(RGB_BACKLIGHT_M6_B)
#include "drivers/issi/is31fl3218.h"
#define BACKLIGHT_LED_COUNT 6
-#elif defined (RGB_BACKLIGHT_HS60)
+#elif defined(RGB_BACKLIGHT_HS60)
#include "drivers/issi/is31fl3733.h"
#define BACKLIGHT_LED_COUNT 64
+#elif defined(RGB_BACKLIGHT_NK65)
+#include "drivers/issi/is31fl3733.h"
+#define BACKLIGHT_LED_COUNT 69
#else
#include "drivers/issi/is31fl3731.h"
#define BACKLIGHT_LED_COUNT 72
#define BACKLIGHT_EFFECT_MAX 10
backlight_config g_config = {
- .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE,
- .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT,
- .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT,
- .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR,
- .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER,
- .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS,
- .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED,
- .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT,
- .brightness = RGB_BACKLIGHT_BRIGHTNESS,
- .effect = RGB_BACKLIGHT_EFFECT,
- .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED,
- .color_1 = RGB_BACKLIGHT_COLOR_1,
- .color_2 = RGB_BACKLIGHT_COLOR_2,
- .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR,
- .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR,
- .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR,
- .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR,
- .alphas_mods = {
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_0,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_1,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_2,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_3,
- RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 },
+ .use_split_backspace = RGB_BACKLIGHT_USE_SPLIT_BACKSPACE,
+ .use_split_left_shift = RGB_BACKLIGHT_USE_SPLIT_LEFT_SHIFT,
+ .use_split_right_shift = RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT,
+ .use_7u_spacebar = RGB_BACKLIGHT_USE_7U_SPACEBAR,
+ .use_iso_enter = RGB_BACKLIGHT_USE_ISO_ENTER,
+ .disable_hhkb_blocker_leds = RGB_BACKLIGHT_DISABLE_HHKB_BLOCKER_LEDS,
+ .disable_when_usb_suspended = RGB_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED,
+ .disable_after_timeout = RGB_BACKLIGHT_DISABLE_AFTER_TIMEOUT,
+ .brightness = RGB_BACKLIGHT_BRIGHTNESS,
+ .effect = RGB_BACKLIGHT_EFFECT,
+ .effect_speed = RGB_BACKLIGHT_EFFECT_SPEED,
+ .color_1 = RGB_BACKLIGHT_COLOR_1,
+ .color_2 = RGB_BACKLIGHT_COLOR_2,
+ .caps_lock_indicator = RGB_BACKLIGHT_CAPS_LOCK_INDICATOR,
+ .layer_1_indicator = RGB_BACKLIGHT_LAYER_1_INDICATOR,
+ .layer_2_indicator = RGB_BACKLIGHT_LAYER_2_INDICATOR,
+ .layer_3_indicator = RGB_BACKLIGHT_LAYER_3_INDICATOR,
+ .alphas_mods = {
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_0,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_1,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_2,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_3,
+ RGB_BACKLIGHT_ALPHAS_MODS_ROW_4 },
#if defined(RGB_BACKLIGHT_M6_B)
- .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } }
+ .custom_color = { { 0, 255 }, { 43, 255 }, { 85, 255 }, { 128, 255 }, { 171, 255 }, { 213, 255 } }
#endif
};
// set to 0 for write, 1 for read (as per I2C protocol)
// ADDR_2 is not needed. it is here as a dummy
#define ISSI_ADDR_1 0x50
-#define ISSI_ADDR_2 0x50
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
{0, K_16, J_16, L_16}, //LA64
};
+#elif defined(RGB_BACKLIGHT_NK65)
+
+// This is a 7-bit address, that gets left-shifted and bit 0
+// set to 0 for write, 1 for read (as per I2C protocol)
+// ADDR_2 is not needed. it is here as a dummy
+#define ISSI_ADDR_1 0x50
+#define ISSI_ADDR_2 0x52
+
+const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
+/* Refer to IS31 manual for these locations
+ * driver
+ * | R location
+ * | | G location
+ * | | | B location
+ * | | | | */
+ {0, B_1, A_1, C_1}, //LA1
+ {0, E_1, D_1, F_1}, //LA2
+ {0, H_1, G_1, I_1}, //LA3
+ {0, K_1, J_1, L_1}, //LA4
+ {0, B_2, A_2, C_2}, //LA5
+ {0, E_2, D_2, F_2}, //LA6
+ {0, H_2, G_2, I_2}, //LA7
+ {0, K_2, J_2, L_2}, //LA8
+ {0, B_3, A_3, C_3}, //LA9
+ {0, E_3, D_3, F_3}, //LA10
+ {0, H_3, G_3, I_3}, //LA11
+ {0, K_3, J_3, L_3}, //LA12
+ {0, B_4, A_4, C_4}, //LA13
+ {0, E_4, D_4, F_4}, //LA14
+ {0, H_4, G_4, I_4}, //LA15
+ {0, K_4, J_4, L_4}, //LA16
+ {0, B_5, A_5, C_5}, //LA17
+ {0, E_5, D_5, F_5}, //LA18
+ {0, H_5, G_5, I_5}, //LA19
+ {0, K_5, J_5, L_5}, //LA20
+ {0, B_6, A_6, C_6}, //LA21
+ {0, E_6, D_6, F_6}, //LA22
+ {0, H_6, G_6, I_6}, //LA23
+ {0, K_6, J_6, L_6}, //LA24
+ {0, B_7, A_7, C_7}, //LA25
+ {0, E_7, D_7, F_7}, //LA26
+ {0, H_7, G_7, I_7}, //LA27
+ {0, K_7, J_7, L_7}, //LA28
+ {0, B_8, A_8, C_8}, //LA29
+ {0, E_8, D_8, F_8}, //LA30
+ {0, H_8, G_8, I_8}, //LA31
+ {0, K_8, J_8, L_8}, //LA32
+ {0, B_9, A_9, C_9}, //LA33
+ {0, E_9, D_9, F_9}, //LA34
+ {0, H_9, G_9, I_9}, //LA35
+ {0, K_9, J_9, L_9}, //LA36
+ {0, B_10, A_10, C_10}, //LA37
+ {0, E_10, D_10, F_10}, //LA38
+ {0, H_10, G_10, I_10}, //LA39
+ {0, K_10, J_10, L_10}, //LA40
+ {0, B_11, A_11, C_11}, //LA41
+ {0, E_11, D_11, F_11}, //LA42
+ {0, H_11, G_11, I_11}, //LA43
+ {0, K_11, J_11, L_11}, //LA44
+ {0, B_12, A_12, C_12}, //LA45
+ {0, E_12, D_12, F_12}, //LA46
+ {0, H_12, G_12, I_12}, //LA47
+ {0, K_12, J_12, L_12}, //LA48
+ {0, B_13, A_13, C_13}, //LA49
+ {0, E_13, D_13, F_13}, //LA50
+ {0, H_13, G_13, I_13}, //LA51
+ {0, K_13, J_13, L_13}, //LA52
+ {0, B_14, A_14, C_14}, //LA53
+ {0, E_14, D_14, F_14}, //LA54
+ {0, H_14, G_14, I_14}, //LA55
+ {0, K_14, J_14, L_14}, //LA56
+ {0, B_15, A_15, C_15}, //LA57
+ {0, E_15, D_15, F_15}, //LA58
+ {0, H_15, G_15, I_15}, //LA59
+ {0, K_15, J_15, L_15}, //LA60
+ {0, B_16, A_16, C_16}, //LA61
+ {0, E_16, D_16, F_16}, //LA62
+ {0, H_16, G_16, I_16}, //LA63
+ {0, K_16, J_16, L_16}, //LA64
+
+ {1, B_1, A_1, C_1}, //LB1
+ {1, E_1, D_1, F_1}, //LB2
+ {1, H_1, G_1, I_1}, //LB3
+ {1, K_1, J_1, L_1}, //LB4
+ {1, B_2, A_2, C_2}, //LB5
+ {1, E_2, D_2, F_2}, //LB6
+ {1, H_2, G_2, I_2}, //LB7
+ {1, K_2, J_2, L_2}, //LB8
+ {1, B_3, A_3, C_3}, //LB9
+ {1, E_3, D_3, F_3}, //LB10
+ {1, H_3, G_3, I_3}, //LB11
+ {1, K_3, J_3, L_3}, //LB12
+ {1, B_4, A_4, C_4}, //LB13
+ {1, E_4, D_4, F_4}, //LB14
+ {1, H_4, G_4, I_4}, //LB15
+ {1, K_4, J_4, L_4}, //LB16
+ {1, B_5, A_5, C_5}, //LB17
+ {1, E_5, D_5, F_5}, //LB18
+ {1, H_5, G_5, I_5}, //LB19
+ {1, K_5, J_5, L_5}, //LB20
+ {1, B_6, A_6, C_6}, //LB21
+ {1, E_6, D_6, F_6}, //LB22
+ {1, H_6, G_6, I_6}, //LB23
+ {1, K_6, J_6, L_6}, //LB24
+ {1, B_7, A_7, C_7}, //LB25
+ {1, E_7, D_7, F_7}, //LB26
+ {1, H_7, G_7, I_7}, //LB27
+ {1, K_7, J_7, L_7}, //LB28
+ {1, B_8, A_8, C_8}, //LB29
+ {1, E_8, D_8, F_8}, //LB30
+ {1, H_8, G_8, I_8}, //LB31
+ {1, K_8, J_8, L_8}, //LB32
+ {1, B_9, A_9, C_9}, //LB33
+ {1, E_9, D_9, F_9}, //LB34
+ {1, H_9, G_9, I_9}, //LB35
+ {1, K_9, J_9, L_9}, //LB36
+ {1, B_10, A_10, C_10}, //LB37
+ {1, E_10, D_10, F_10}, //LB38
+ {1, H_10, G_10, I_10}, //LB39
+ {1, K_10, J_10, L_10}, //LB40
+ {1, B_11, A_11, C_11}, //LB41
+ {1, E_11, D_11, F_11}, //LB42
+ {1, H_11, G_11, I_11}, //LB43
+ {1, K_11, J_11, L_11}, //LB44
+ {1, B_12, A_12, C_12}, //LB45
+ {1, E_12, D_12, F_12}, //LB46
+ {1, H_12, G_12, I_12}, //LB47
+ {1, K_12, J_12, L_12}, //LB48
+ {1, B_13, A_13, C_13}, //LB49
+ {1, E_13, D_13, F_13}, //LB50
+ {1, H_13, G_13, I_13}, //LB51
+ {1, K_13, J_13, L_13}, //LB52
+ {1, B_14, A_14, C_14}, //LB53
+ {1, E_14, D_14, F_14}, //LB54
+ {1, H_14, G_14, I_14}, //LB55
+ {1, K_14, J_14, L_14}, //LB56
+ {1, B_15, A_15, C_15}, //LB57
+ {1, E_15, D_15, F_15}, //LB58
+ {1, H_15, G_15, I_15}, //LB59
+ {1, K_15, J_15, L_15}, //LB60
+ {1, B_16, A_16, C_16}, //LB61
+ {1, E_16, D_16, F_16}, //LB62
+ {1, H_16, G_16, I_16}, //LB63
+ {1, K_16, J_16, L_16}, //LB64
+};
+
#elif !defined(RGB_BACKLIGHT_M6_B)
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
* | | G location
* | | | B location
* | | | | */
- {0, C2_1, C3_1, C4_1}, // LA0
- {0, C1_1, C3_2, C4_2}, // LA1
- {0, C1_2, C2_2, C4_3}, // LA2
- {0, C1_3, C2_3, C3_3}, // LA3
- {0, C1_4, C2_4, C3_4}, // LA4
- {0, C1_5, C2_5, C3_5}, // LA5
- {0, C1_6, C2_6, C3_6}, // LA6
- {0, C1_7, C2_7, C3_7}, // LA7
- {0, C1_8, C2_8, C3_8}, // LA8
- {0, C9_1, C8_1, C7_1}, // LA9
- {0, C9_2, C8_2, C7_2}, // LA10
- {0, C9_3, C8_3, C7_3}, // LA11
- {0, C9_4, C8_4, C7_4}, // LA12
- {0, C9_5, C8_5, C7_5}, // LA13
- {0, C9_6, C8_6, C7_6}, // LA14
- {0, C9_7, C8_7, C6_6}, // LA15
- {0, C9_8, C7_7, C6_7}, // LA16
- {0, C8_8, C7_8, C6_8}, // LA17
-
- {0, C2_9, C3_9, C4_9}, // LB0
- {0, C1_9, C3_10, C4_10}, // LB1
- {0, C1_10, C2_10, C4_11}, // LB2
- {0, C1_11, C2_11, C3_11}, // LB3
- {0, C1_12, C2_12, C3_12}, // LB4
- {0, C1_13, C2_13, C3_13}, // LB5
- {0, C1_14, C2_14, C3_14}, // LB6
- {0, C1_15, C2_15, C3_15}, // LB7
- {0, C1_16, C2_16, C3_16}, // LB8
- {0, C9_9, C8_9, C7_9}, // LB9
- {0, C9_10, C8_10, C7_10}, // LB10
- {0, C9_11, C8_11, C7_11}, // LB11
- {0, C9_12, C8_12, C7_12}, // LB12
- {0, C9_13, C8_13, C7_13}, // LB13
- {0, C9_14, C8_14, C7_14}, // LB14
- {0, C9_15, C8_15, C6_14}, // LB15
- {0, C9_16, C7_15, C6_15}, // LB16
- {0, C8_16, C7_16, C6_16}, // LB17
-
- {1, C2_1, C3_1, C4_1}, // LC0
- {1, C1_1, C3_2, C4_2}, // LC1
- {1, C1_2, C2_2, C4_3}, // LC2
- {1, C1_3, C2_3, C3_3}, // LC3
- {1, C1_4, C2_4, C3_4}, // LC4
- {1, C1_5, C2_5, C3_5}, // LC5
- {1, C1_6, C2_6, C3_6}, // LC6
- {1, C1_7, C2_7, C3_7}, // LC7
- {1, C1_8, C2_8, C3_8}, // LC8
- {1, C9_1, C8_1, C7_1}, // LC9
- {1, C9_2, C8_2, C7_2}, // LC10
- {1, C9_3, C8_3, C7_3}, // LC11
- {1, C9_4, C8_4, C7_4}, // LC12
- {1, C9_5, C8_5, C7_5}, // LC13
- {1, C9_6, C8_6, C7_6}, // LC14
- {1, C9_7, C8_7, C6_6}, // LC15
- {1, C9_8, C7_7, C6_7}, // LC16
- {1, C8_8, C7_8, C6_8}, // LC17
-
- {1, C2_9, C3_9, C4_9}, // LD0
- {1, C1_9, C3_10, C4_10}, // LD1
- {1, C1_10, C2_10, C4_11}, // LD2
- {1, C1_11, C2_11, C3_11}, // LD3
- {1, C1_12, C2_12, C3_12}, // LD4
- {1, C1_13, C2_13, C3_13}, // LD5
- {1, C1_14, C2_14, C3_14}, // LD6
- {1, C1_15, C2_15, C3_15}, // LD7
- {1, C1_16, C2_16, C3_16}, // LD8
- {1, C9_9, C8_9, C7_9}, // LD9
- {1, C9_10, C8_10, C7_10}, // LD10
- {1, C9_11, C8_11, C7_11}, // LD11
- {1, C9_12, C8_12, C7_12}, // LD12
- {1, C9_13, C8_13, C7_13}, // LD13
- {1, C9_14, C8_14, C7_14}, // LD14
- {1, C9_15, C8_15, C6_14}, // LD15
- {1, C9_16, C7_15, C6_15}, // LD16
- {1, C8_16, C7_16, C6_16}, // LD17
+ {0, C2_1, C3_1, C4_1}, // LA0
+ {0, C1_1, C3_2, C4_2}, // LA1
+ {0, C1_2, C2_2, C4_3}, // LA2
+ {0, C1_3, C2_3, C3_3}, // LA3
+ {0, C1_4, C2_4, C3_4}, // LA4
+ {0, C1_5, C2_5, C3_5}, // LA5
+ {0, C1_6, C2_6, C3_6}, // LA6
+ {0, C1_7, C2_7, C3_7}, // LA7
+ {0, C1_8, C2_8, C3_8}, // LA8
+ {0, C9_1, C8_1, C7_1}, // LA9
+ {0, C9_2, C8_2, C7_2}, // LA10
+ {0, C9_3, C8_3, C7_3}, // LA11
+ {0, C9_4, C8_4, C7_4}, // LA12
+ {0, C9_5, C8_5, C7_5}, // LA13
+ {0, C9_6, C8_6, C7_6}, // LA14
+ {0, C9_7, C8_7, C6_6}, // LA15
+ {0, C9_8, C7_7, C6_7}, // LA16
+ {0, C8_8, C7_8, C6_8}, // LA17
+
+ {0, C2_9, C3_9, C4_9}, // LB0
+ {0, C1_9, C3_10, C4_10}, // LB1
+ {0, C1_10, C2_10, C4_11}, // LB2
+ {0, C1_11, C2_11, C3_11}, // LB3
+ {0, C1_12, C2_12, C3_12}, // LB4
+ {0, C1_13, C2_13, C3_13}, // LB5
+ {0, C1_14, C2_14, C3_14}, // LB6
+ {0, C1_15, C2_15, C3_15}, // LB7
+ {0, C1_16, C2_16, C3_16}, // LB8
+ {0, C9_9, C8_9, C7_9}, // LB9
+ {0, C9_10, C8_10, C7_10}, // LB10
+ {0, C9_11, C8_11, C7_11}, // LB11
+ {0, C9_12, C8_12, C7_12}, // LB12
+ {0, C9_13, C8_13, C7_13}, // LB13
+ {0, C9_14, C8_14, C7_14}, // LB14
+ {0, C9_15, C8_15, C6_14}, // LB15
+ {0, C9_16, C7_15, C6_15}, // LB16
+ {0, C8_16, C7_16, C6_16}, // LB17
+
+ {1, C2_1, C3_1, C4_1}, // LC0
+ {1, C1_1, C3_2, C4_2}, // LC1
+ {1, C1_2, C2_2, C4_3}, // LC2
+ {1, C1_3, C2_3, C3_3}, // LC3
+ {1, C1_4, C2_4, C3_4}, // LC4
+ {1, C1_5, C2_5, C3_5}, // LC5
+ {1, C1_6, C2_6, C3_6}, // LC6
+ {1, C1_7, C2_7, C3_7}, // LC7
+ {1, C1_8, C2_8, C3_8}, // LC8
+ {1, C9_1, C8_1, C7_1}, // LC9
+ {1, C9_2, C8_2, C7_2}, // LC10
+ {1, C9_3, C8_3, C7_3}, // LC11
+ {1, C9_4, C8_4, C7_4}, // LC12
+ {1, C9_5, C8_5, C7_5}, // LC13
+ {1, C9_6, C8_6, C7_6}, // LC14
+ {1, C9_7, C8_7, C6_6}, // LC15
+ {1, C9_8, C7_7, C6_7}, // LC16
+ {1, C8_8, C7_8, C6_8}, // LC17
+
+ {1, C2_9, C3_9, C4_9}, // LD0
+ {1, C1_9, C3_10, C4_10}, // LD1
+ {1, C1_10, C2_10, C4_11}, // LD2
+ {1, C1_11, C2_11, C3_11}, // LD3
+ {1, C1_12, C2_12, C3_12}, // LD4
+ {1, C1_13, C2_13, C3_13}, // LD5
+ {1, C1_14, C2_14, C3_14}, // LD6
+ {1, C1_15, C2_15, C3_15}, // LD7
+ {1, C1_16, C2_16, C3_16}, // LD8
+ {1, C9_9, C8_9, C7_9}, // LD9
+ {1, C9_10, C8_10, C7_10}, // LD10
+ {1, C9_11, C8_11, C7_11}, // LD11
+ {1, C9_12, C8_12, C7_12}, // LD12
+ {1, C9_13, C8_13, C7_13}, // LD13
+ {1, C9_14, C8_14, C7_14}, // LD14
+ {1, C9_15, C8_15, C6_14}, // LD15
+ {1, C9_16, C7_15, C6_15}, // LD16
+ {1, C8_16, C7_16, C6_16}, // LD17
};
#endif // !defined(RGB_BACKLIGHT_M6_B)
typedef struct Point {
- uint8_t x;
- uint8_t y;
+ uint8_t x;
+ uint8_t y;
} Point;
// index in range 0..71 (LA0..LA17, LB0..LB17, LC0..LC17, LD0..LD17)
// point values in range x=0..224 y=0..64
// origin is center of top-left key (i.e Esc)
-#if defined (RGB_BACKLIGHT_ZEAL65)
+#if defined(RGB_BACKLIGHT_ZEAL65)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
- {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
- // LB0..LB17
- {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32},
- {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
- // LC0..LC17
- {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64},
- {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64},
- // LD0..LD17
- {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
- {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64}
+ // LA0..LA17
+ {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+ {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+ // LB0..LB17
+ {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {240,0}, {240,16}, {240,32},
+ {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
+ // LC0..LC17
+ {96,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {255,255}, {48,60}, {28,64},
+ {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,44}, {10,48}, {4,64},
+ // LD0..LD17
+ {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
+ {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {144,60}, {164,64}, {188,64}, {208,64}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
- {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
- // LB0..LB17
- {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255},
- {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
- // LC0..LC17
- {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255},
- {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255},
- // LD0..LD17
- {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
- {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255}
+ // LA0..LA17
+ {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
+ {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
+ // LB0..LB17
+ {56,255}, {51,255}, {46,255}, {42,255}, {37,255}, {35,255}, {32,255}, {19,255}, {0,255},
+ {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
+ // LC0..LC17
+ {184,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {255,255}, {167,255}, {165,255},
+ {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {145,233}, {148,255}, {161,255},
+ // LD0..LD17
+ {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
+ {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {201,228}, {206,255}, {213,255}, {218,255}
};
-#elif defined (RGB_BACKLIGHT_KOYU)
+#elif defined(RGB_BACKLIGHT_KOYU)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
- {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
- // LB0..LB17
- {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32},
- {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
- // LC0..LC17
- {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64},
- {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64},
- // LD0..LD17
- {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
- {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255}
+ // LA0..LA17
+ {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+ {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+ // LB0..LB17
+ {144,0}, {160,0}, {176,0}, {192,0}, {208,0}, {224,0}, {240,0}, {240,16}, {240,32},
+ {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {240,48}, {240,64}, {224,64},
+ // LC0..LC17
+ {112,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {64,60}, {44,60}, {24,64},
+ {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {255,255}, {10,48}, {4,64},
+ // LD0..LD17
+ {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {202,48}, {224,48},
+ {116,48}, {132,48}, {148,48}, {164,48}, {255,255}, {160,60}, {180,64}, {208,64}, {255,255}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
- {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
- // LB0..LB17
- {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255},
- {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
- // LC0..LC17
- {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255},
- {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255},
- // LD0..LD17
- {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
- {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255}
+ // LA0..LA17
+ {64,128}, {75,132}, {84,145}, {91,164}, {97,187}, {102,213}, {105,242}, {109,255}, {128,243},
+ {61,255}, {67,255}, {72,255}, {77,255}, {82,255}, {86,255}, {90,255}, {93,255}, {96,255},
+ // LB0..LB17
+ {56,255}, {51,255}, {46,255}, {42,255}, {38,255}, {35,255}, {32,255}, {19,255}, {0,255},
+ {53,132}, {44,145}, {37,164}, {31,187}, {26,213}, {22,249}, {237,255}, {224,255}, {221,255},
+ // LC0..LC17
+ {189,255}, {179,135}, {170,149}, {163,169}, {157,193}, {153,220}, {172,252}, {169,255}, {165,255},
+ {128,26}, {128,60}, {128,94}, {128,128}, {128,162}, {128,196}, {255,255}, {148,255}, {161,255},
+ // LD0..LD17
+ {0,9}, {0,43}, {0,77}, {0,111}, {0,145}, {0,201}, {224,181}, {230,217}, {235,255},
+ {189,128}, {200,131}, {210,141}, {218,159}, {255,255}, {207,238}, {211,255}, {218,255}, {255,255}
};
-#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
+#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
- {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
- // LB0..LB17
- {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255},
- {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255},
- // LC0..LC17
- {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64},
- {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64},
- // LD0..LD17
- {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48},
- {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64}
+ // LA0..LA17
+ {120,16}, {104,16}, {88,16}, {72,16}, {56,16}, {40,16}, {24,16}, {4,16}, {4,32},
+ {128,0}, {112,0}, {96,0}, {80,0}, {64,0}, {48,0}, {32,0}, {16,0}, {0,0},
+ // LB0..LB17
+ {144,0}, {160,0}, {176,0}, {192,0}, {216,0}, {224,0}, {255,255}, {255,255}, {255,255},
+ {136,16}, {152,16}, {168,16}, {184,16}, {200,16}, {220,16}, {255,255}, {255,255}, {255,255},
+ // LC0..LC17
+ {102,64}, {100,48}, {84,48}, {68,48}, {52,48}, {36,48}, {60,64}, {43,64}, {23,64},
+ {108,32}, {92,32}, {76,32}, {60,32}, {44,32}, {28,32}, {20,48}, {2,48}, {3,64},
+ // LD0..LD17
+ {124,32}, {140,32}, {156,32}, {172,32}, {188,32}, {214,32}, {180,48}, {210,48}, {224,48},
+ {116,48}, {132,48}, {148,48}, {164,48}, {144,64}, {161,64}, {181,64}, {201,64}, {221,64}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA0..LA17
- {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255},
- {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
- // LB0..LB17
- {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255},
- {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255},
- // LC0..LC17
- {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255},
- {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255},
- // LD0..LD17
- {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
- {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
+ // LA0..LA17
+ {58,129}, {70,129}, {80,139}, {89,157}, {96,181}, {101,208}, {105,238}, {109,255}, {128,247}, {58,255},
+ {64,255}, {70,255}, {75,255}, {80,255}, {85,255}, {89,255}, {93,255}, {96,255},
+ // LB0..LB17
+ {53,255}, {48,255}, {43,255}, {39,255}, {34,255}, {32,255}, {255,255}, {255,255}, {255,255},
+ {48,139}, {39,157}, {32,181}, {27,208}, {23,238}, {19,255}, {255,255}, {255,255}, {255,255},
+ // LC0..LC17
+ {188,255}, {183,131}, {173,143}, {165,163}, {159,188}, {154,216}, {172,252}, {170,255}, {165,255},
+ {128,9}, {128,46}, {128,82}, {128,119}, {128,155}, {128,192}, {150,244}, {147,255}, {161,255},
+ // LD0..LD17
+ {0,27}, {0,64}, {0,101}, {0,137}, {0,174}, {255,233}, {228,201}, {235,255}, {237,255},
+ {195,128}, {206,136}, {215,152}, {222,175}, {205,234}, {209,255}, {214,255}, {219,255}, {223,255}
};
-#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI)
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA47
- {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
- {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
- {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
- {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
- {255,255},// LA48 does not exist, dummy
- // LA49..LA50
- {192,0}, {200,16},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
- {255,255},// LA61 does not exit, dummy
- {162,64}, {182,64}, {202,64}
+ // LA1..LA47
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {214,32}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA47
- {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
- {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
- {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
- {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
- {255,255},// LA48 does not exist, dummy
- // LA49..LA50
- {39,255}, {23,238},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
- {255,255},// LA61 does not exit, dummy
- {209,255}, {215,255}, {220,255}
+ // LA1..LA47
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
+ {255,255},// LA48 does not exist, dummy
+ // LA49..LA50
+ {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
};
-#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB)
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB)
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA60
- {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
- {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
- {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
- {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
- {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64},
- {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
- // LA63..LA64
- {180,64}, {200,64}
+ // LA1..LA60
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {224,0}, {192,0}, {200,16}, {202,48}, {224,48}, {208,0}, {220,16}, {214,32}, {220,64}, {4,64}, {24,64}, {44,64}, {112,64},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {180,64}, {200,64}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA60
- {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
- {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
- {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
- {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255},
- {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255},
- {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
- // LA63..LA64
- {214,255}, {219,255}
+ // LA1..LA60
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {32,255},
+ {39,255}, {23,238}, {233,242}, {237,255}, {35,255}, {19,255}, {255,233}, {223,255}, {161,255}, {165,255}, {170,255}, {192,255},
+ {255,255}, {255,255}, // LA61..LA62 does not exit, dummy
+ // LA63..LA64
+ {214,255}, {219,255}
};
-#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO
+#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA50
- {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0},
- {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16},
- {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16},
- {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
- {255,255},// LA61 does not exit, dummy
- {162,64}, {182,64}, {202,64}
+ // LA1..LA50
+ {0,0}, {4,16}, {6,32}, {2,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48}, {48,0},
+ {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48}, {96,0}, {104,16},
+ {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32}, {148,48}, {144,0}, {152,16},
+ {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32}, {20,48}, {192,0}, {200,16},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {210,48}, {216,0}, {220,16}, {222,24}, {222,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ {162,64}, {182,64}, {202,64}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- // LA1..LA50
- {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255},
- {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129},
- {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101},
- {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238},
- {255,255},// LA51 does not exit, dummy
- // LA52..LA60
- {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
- {255,255},// LA61 does not exit, dummy
- {209,255}, {215,255}, {220,255}
+ // LA1..LA50
+ {96,255}, {109,255}, {128,242}, {147,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188}, {85,255},
+ {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131}, {70,255}, {70,129},
+ {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152}, {53,255}, {39,157}, {255,101},
+ {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174}, {150,246}, {39,255}, {23,238},
+ {255,255},// LA51 does not exit, dummy
+ // LA52..LA60
+ {235,255}, {33,255}, {19,255}, {10,255}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ {209,255}, {215,255}, {220,255}
};
-#elif defined (RGB_BACKLIGHT_M6_B)
+#elif defined(RGB_BACKLIGHT_NK65)
+const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {0,0}, {4,16}, {6,32}, {10,48}, {16,0}, {24,16}, {28,32}, {36,48}, {32,0}, {40,16}, {44,32}, {52,48},
+ {48,0}, {56,16}, {60,32}, {68,48}, {64,0}, {72,16}, {76,32}, {84,48}, {80,0}, {88,16}, {92,32}, {100,48},
+ {96,0}, {104,16}, {108,32}, {116,48}, {112,0}, {120,16}, {124,32}, {132,48}, {128,0}, {136,16}, {140,32},
+ {148,48}, {144,0}, {152,16}, {156,32}, {164,48}, {160,0}, {168,16}, {172,32}, {180,48}, {176,0}, {184, 16}, {188,32},
+ {160,64}, {192,0}, {200,16}, {210,48}, {224,48}, {216,0}, {220,16}, {214,32}, {224,64}, {2,64}, {22,64}, {42,64}, {102,64},
+ {255,255},// LA61 does not exit, dummy
+ //LA62..LB5
+ {176,64}, {192,64}, {208,64}, {240,0}, {240,16}, {240,48}, {240,64}, {240,32}
+};
+const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
+ // LA1..LA60
+ {96,255}, {109,255}, {128,242}, {148,255}, {93,255}, {105,238}, {128,192}, {154,216}, {89,255}, {101,208}, {128,155}, {159,188},
+ {85,255}, {96,181}, {128,119}, {165,163}, {81,255}, {89,157}, {128,82}, {173,143}, {75,255}, {81,139}, {128,46}, {183,131},
+ {70,255}, {70,129}, {129,9}, {195,128}, {64,255}, {58,129}, {255,27}, {206,136}, {58,255}, {47,139}, {255,64}, {215,152},
+ {53,255}, {39,157}, {255,101}, {222,175}, {47,255}, {32,181}, {255,137}, {228,201}, {43,255}, {27,208}, {255, 174},
+ {208,255}, {39,255}, {23,238}, {235,255}, {235,255}, {33,255}, {19,255}, {255,233}, {224,255}, {160,255}, {164,255}, {169,255}, {188,255},
+ {255,255},// LA61 does not exit, dummy
+ //LA62..LB5
+ {221,255}, {225,255}, {229,255}, {22,255}, {12,255}, {244,255}, {234,255}, {255,255},
+};
+#elif defined(RGB_BACKLIGHT_M6_B)
// M6-B is really simple:
// 0 3 5
// 1 2 4
const Point g_map_led_to_point[BACKLIGHT_LED_COUNT] PROGMEM = {
- {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
+ {0,0}, {0,16}, {16,16}, {16,0}, {32,16}, {32,0}
};
const Point g_map_led_to_point_polar[BACKLIGHT_LED_COUNT] PROGMEM = {
- {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255}
+ {160,255}, {96,255}, {77,255}, {179,255}, {51,255}, {205,255}
};
#endif
// or having a large "bitmap" and sampling them.
void map_led_to_point( uint8_t index, Point *point )
{
- // Slightly messy way to get Point structs out of progmem.
- uint8_t *addr = (uint8_t*)&g_map_led_to_point[index];
- point->x = pgm_read_byte(addr);
- point->y = pgm_read_byte(addr+1);
+ // Slightly messy way to get Point structs out of progmem.
+ uint8_t *addr = (uint8_t*)&g_map_led_to_point[index];
+ point->x = pgm_read_byte(addr);
+ point->y = pgm_read_byte(addr+1);
-#if defined (RGB_BACKLIGHT_M6_B)
- return;
+#if defined(RGB_BACKLIGHT_M6_B) || defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
+ return;
#endif
- switch (index)
- {
- case 18+4: // LB4A
- if ( g_config.use_split_backspace )
- point->x -= 8;
- break;
-#if defined (RGB_BACKLIGHT_ZEAL60)
- case 18+14: // LB14A
- if ( g_config.use_iso_enter )
- point->y += 8; // extremely pedantic
- break;
- case 54+5: // LD5A
- if ( !g_config.use_iso_enter )
- point->x -= 10;
- break;
- case 36+16: // LC16A
- if ( !g_config.use_split_left_shift )
- point->x += 8;
- break;
+ switch (index)
+ {
+ case 18+4: // LB4A
+ if ( g_config.use_split_backspace )
+ point->x -= 8;
+ break;
+#if defined(RGB_BACKLIGHT_ZEAL60)
+ case 18+14: // LB14A
+ if ( g_config.use_iso_enter )
+ point->y += 8; // extremely pedantic
+ break;
+ case 54+5: // LD5A
+ if ( !g_config.use_iso_enter )
+ point->x -= 10;
+ break;
+ case 36+16: // LC16A
+ if ( !g_config.use_split_left_shift )
+ point->x += 8;
+ break;
#endif
-#if defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
- case 36+0: // LC0A
- if ( g_config.use_7u_spacebar )
- point->x += 10;
- break;
- case 36+6: // LC6A
- if ( g_config.use_7u_spacebar )
- point->x += 4;
- break;
- case 54+7: // LD7A
- if ( !g_config.use_split_right_shift )
- point->x -= 8;
- break;
+#if defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
+ case 36+0: // LC0A
+ if ( g_config.use_7u_spacebar )
+ point->x += 10;
+ break;
+ case 36+6: // LC6A
+ if ( g_config.use_7u_spacebar )
+ point->x += 4;
+ break;
+ case 54+7: // LD7A
+ if ( !g_config.use_split_right_shift )
+ point->x -= 8;
+ break;
#endif
- }
+ }
}
void map_led_to_point_polar( uint8_t index, Point *point )
{
- // Slightly messy way to get Point structs out of progmem.
- uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index];
- point->x = pgm_read_byte(addr);
- point->y = pgm_read_byte(addr+1);
+ // Slightly messy way to get Point structs out of progmem.
+ uint8_t *addr = (uint8_t*)&g_map_led_to_point_polar[index];
+ point->x = pgm_read_byte(addr);
+ point->y = pgm_read_byte(addr+1);
}
//
//
-#if defined (RGB_BACKLIGHT_ZEAL65)
+#if defined(RGB_BACKLIGHT_ZEAL65)
// Note: Left spacebar stab is at 4,2 (LC7)
// Right spacebar stab is at 4,9 (D14)
//
// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15
// C17, C8, C7, ---, ---, ---, ---, C0, ---, D14, D15, D16, D17, B17, B16
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
- { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
- { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
- { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
- { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 }
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
+ { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
+ { 36+17, 36+8, 36+7, 255, 255, 255, 255, 36+0, 255, 54+14, 54+15, 54+16, 54+17, 18+17, 18+16 }
};
#elif defined(RGB_BACKLIGHT_KOYU)
// Note: Left spacebar stab is at 4,4 (LC6)
// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8, B15
// C17, C8, C7, C6, ---, ---, ---, C0, ---, ---, D14, D15, D16, B17, B16
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
- { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
- { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
- { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
- { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 }
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4, 18+6 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14, 18+7 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5, 18+8 },
+ { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8, 18+15 },
+ { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 255, 54+14, 54+15, 54+16, 18+17, 18+16 }
};
-#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
+#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
// Note: Left spacebar stab is at 4,3 (LC6)
// Right spacebar stab is at 4,9 (LD13) or 4,10 (LD14)
//
// C16, C15, C5, C4, C3, C2, C1, D9, D10, D11, D12, D6, D7, D8,
// C17, C8, C7, C6, ---, ---, ---, C0, ---, D13, D14, D15, D16, D17,
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 },
- { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 },
- { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 },
- { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
- { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
+ { 0+17, 0+16, 0+15, 0+14, 0+13, 0+12, 0+11, 0+10, 0+9, 18+0, 18+1, 18+2, 18+3, 18+4 },
+ { 0+7, 0+6, 0+5, 0+4, 0+3, 0+2, 0+1, 0+0, 18+9, 18+10, 18+11, 18+12, 18+13, 18+14 },
+ { 0+8, 36+14, 36+13, 36+12, 36+11, 36+10, 36+9, 54+0, 54+1, 54+2, 54+3, 54+4, 54+5, 18+5 },
+ { 36+16, 36+15, 36+5, 36+4, 36+3, 36+2, 36+1, 54+9, 54+10, 54+11, 54+12, 54+6, 54+7, 54+8 },
+ { 36+17, 36+8, 36+7, 36+6, 255, 255, 255, 36+0, 255, 54+13, 54+14, 54+15, 54+16, 54+17 }
};
-#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_ANSI)
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_ANSI)
//
// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
- { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
};
-#elif defined (RGB_BACKLIGHT_HS60) && defined (HS60_HHKB)
+#elif defined(RGB_BACKLIGHT_HS60) && defined(HS60_HHKB)
//
// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, LA48,
// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52,
// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, ---, LA63, LA64, LA56
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
- { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 }
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 48-1 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 255, 63-1, 64-1, 56-1 }
};
-#elif defined (RGB_BACKLIGHT_HS60) //HS60_ISO
+#elif defined(RGB_BACKLIGHT_HS60) //HS60_ISO
//
// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53,
// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---,
// LA4, LA48, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, ---, LA52,
// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, ---, LA62, LA63, LA64, LA56
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
- { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
- { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
- { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
- { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1 },
+ { 4-1, 48-1, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 255, 52-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 255, 62-1, 63-1, 64-1, 56-1 }
+};
+#elif defined(RGB_BACKLIGHT_NK65)
+//
+// LA1, LA5, LA9, LA13, LA17, LA21, LA25, LA29, LA33, LA37, LA41, LA45, LA49, LA53, LB1,
+// LA2, LA6, LA10, LA14, LA18, LA22, LA26, LA30, LA34, LA38, LA42, LA46, LA50, ---, LB2,
+// LA3, LA7, LA11, LA15, LA19, LA23, LA27, LA31, LA35, LA39, LA43, LA47, LA54, LA55, LB5,
+// LA4, ---, LA8, LA12, LA16, LA20, LA24, LA28, LA32, LA36, LA40, LA44, LA51, LA52, LB3,
+// LA57, LA58, LA59, ---, ---, ---, LA60, ---, ---, LA48, LA62, LA63, LA64, LA56, LB4
+const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+ { 1-1, 5-1, 9-1, 13-1, 17-1, 21-1, 25-1, 29-1, 33-1, 37-1, 41-1, 45-1, 49-1, 53-1, 1+64-1 },
+ { 2-1, 6-1, 10-1, 14-1, 18-1, 22-1, 26-1, 30-1, 34-1, 38-1, 42-1, 46-1, 50-1, 255, 2+64-1 },
+ { 3-1, 7-1, 11-1, 15-1, 19-1, 23-1, 27-1, 31-1, 35-1, 39-1, 43-1, 47-1, 54-1, 55-1, 5+64-1 },
+ { 4-1, 255, 8-1, 12-1, 16-1, 20-1, 24-1, 28-1, 32-1, 36-1, 40-1, 44-1, 51-1, 52-1, 3+64-1 },
+ { 57-1, 58-1, 59-1, 255, 255, 255, 60-1, 255, 255, 48-1, 62-1, 63-1, 64-1, 56-1, 4+64-1 }
};
-#elif defined (RGB_BACKLIGHT_M6_B)
+#elif defined(RGB_BACKLIGHT_M6_B)
// M6-B is really simple:
// 0 3 5
// 1 2 4
const uint8_t g_map_row_column_to_led[MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
- { 0, 3, 5, 1, 2, 4 }
+ { 0, 3, 5, 1, 2, 4 }
};
#endif
void map_row_column_to_led( uint8_t row, uint8_t column, uint8_t *led )
{
- *led = 255;
- if ( row < MATRIX_ROWS && column < MATRIX_COLS )
- {
- *led = pgm_read_byte(&g_map_row_column_to_led[row][column]);
- }
+ *led = 255;
+ if ( row < MATRIX_ROWS && column < MATRIX_COLS )
+ {
+ *led = pgm_read_byte(&g_map_row_column_to_led[row][column]);
+ }
}
void backlight_update_pwm_buffers(void)
{
-#if defined (RGB_BACKLIGHT_M6_B)
- IS31FL3218_update_pwm_buffers();
-#elif defined (RGB_BACKLIGHT_HS60)
- IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
- IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_update_pwm_buffers();
+#elif defined(RGB_BACKLIGHT_HS60)
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+#elif defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_pwm_buffers( ISSI_ADDR_2, 1 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
#else
- IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
- IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+ IS31FL3731_update_pwm_buffers( ISSI_ADDR_1, ISSI_ADDR_2 );
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
#endif
}
void backlight_set_color( int index, uint8_t red, uint8_t green, uint8_t blue )
{
-#if defined (RGB_BACKLIGHT_M6_B)
- IS31FL3218_set_color( index, red, green, blue );
-#elif defined (RGB_BACKLIGHT_HS60)
- IS31FL3733_set_color( index, red, green, blue );
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_set_color( index, red, green, blue );
+#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_set_color( index, red, green, blue );
#else
- IS31FL3731_set_color( index, red, green, blue );
+ IS31FL3731_set_color( index, red, green, blue );
#endif
}
void backlight_set_color_all( uint8_t red, uint8_t green, uint8_t blue )
{
-#if defined (RGB_BACKLIGHT_M6_B)
- IS31FL3218_set_color_all( red, green, blue );
-#elif defined (RGB_BACKLIGHT_HS60)
- IS31FL3733_set_color_all( red, green, blue );
+#if defined(RGB_BACKLIGHT_M6_B)
+ IS31FL3218_set_color_all( red, green, blue );
+#elif defined(RGB_BACKLIGHT_HS60) || defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_set_color_all( red, green, blue );
#else
- IS31FL3731_set_color_all( red, green, blue );
+ IS31FL3731_set_color_all( red, green, blue );
#endif
}
void backlight_set_key_hit(uint8_t row, uint8_t column)
{
- uint8_t led;
- map_row_column_to_led(row,column,&led);
- g_key_hit[led] = 0;
+ uint8_t led;
+ map_row_column_to_led(row,column,&led);
+ g_key_hit[led] = 0;
- g_any_key_hit = 0;
+ g_any_key_hit = 0;
}
-#if !defined(RGB_BACKLIGHT_HS60)
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
// This is (F_CPU/1024) / 20 Hz
// = 15625 Hz / 20 Hz
// = 781
void backlight_timer_init(void)
{
- static uint8_t backlight_timer_is_init = 0;
- if ( backlight_timer_is_init )
- {
- return;
- }
- backlight_timer_is_init = 1;
-
- // Timer 3 setup
- TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP
- _BV(CS32) | _BV(CS30); // prescale by /1024
- // Set TOP value
- uint8_t sreg = SREG;
- cli();
-
- OCR3AH = (TIMER3_TOP >> 8) & 0xff;
- OCR3AL = TIMER3_TOP & 0xff;
- SREG = sreg;
+ static uint8_t backlight_timer_is_init = 0;
+ if ( backlight_timer_is_init )
+ {
+ return;
+ }
+ backlight_timer_is_init = 1;
+
+ // Timer 3 setup
+ TCCR3B = _BV(WGM32) | // CTC mode OCR3A as TOP
+ _BV(CS32) | _BV(CS30); // prescale by /1024
+ // Set TOP value
+ uint8_t sreg = SREG;
+ cli();
+
+ OCR3AH = (TIMER3_TOP >> 8) & 0xff;
+ OCR3AL = TIMER3_TOP & 0xff;
+ SREG = sreg;
}
void backlight_timer_enable(void)
{
- TIMSK3 |= _BV(OCIE3A);
+ TIMSK3 |= _BV(OCIE3A);
}
void backlight_timer_disable(void)
{
- TIMSK3 &= ~_BV(OCIE3A);
+ TIMSK3 &= ~_BV(OCIE3A);
}
#else //STM32, use GPT with TIM4. Enable in halconf.h
static void gpt_backlight_timer_task(GPTDriver *gptp);
// Timer setup at 200Khz, callback at 10k ticks = 20Hz
static GPTConfig gpt4cfg1 = {
- .frequency = 200000U,
- .callback = gpt_backlight_timer_task
+ .frequency = 200000U,
+ .callback = gpt_backlight_timer_task
};
void backlight_timer_init(void)
{
- gptStart(&GPTD4, &gpt4cfg1);
+ gptStart(&GPTD4, &gpt4cfg1);
}
void backlight_timer_enable(void)
{
- gptStartContinuous(&GPTD4, 10000);
+ gptStartContinuous(&GPTD4, 10000);
}
void backlight_timer_disable(void)
{
- gptStopTimer(&GPTD4);
+ gptStopTimer(&GPTD4);
}
-#endif //!defined(RGB_BACKLIGHT_HS60)
+#endif //!defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
void backlight_set_suspend_state(bool state)
{
- g_suspend_state = state;
+ g_suspend_state = state;
}
void backlight_set_indicator_state(uint8_t state)
{
- g_indicator_state = state;
+ g_indicator_state = state;
}
void backlight_effect_rgb_test(void)
{
- // Mask out bits 4 and 5
- // This 2-bit value will stay the same for 16 ticks.
- switch ( (g_tick & 0x30) >> 4 )
- {
- case 0:
- {
- backlight_set_color_all( 255, 0, 0 );
- break;
- }
- case 1:
- {
- backlight_set_color_all( 0, 255, 0 );
- break;
- }
- case 2:
- {
- backlight_set_color_all( 0, 0, 255 );
- break;
- }
- case 3:
- {
- backlight_set_color_all( 255, 255, 255 );
- break;
- }
- }
+ // Mask out bits 4 and 5
+ // This 2-bit value will stay the same for 16 ticks.
+ switch ( (g_tick & 0x30) >> 4 )
+ {
+ case 0:
+ {
+ backlight_set_color_all( 255, 0, 0 );
+ break;
+ }
+ case 1:
+ {
+ backlight_set_color_all( 0, 255, 0 );
+ break;
+ }
+ case 2:
+ {
+ backlight_set_color_all( 0, 0, 255 );
+ break;
+ }
+ case 3:
+ {
+ backlight_set_color_all( 255, 255, 255 );
+ break;
+ }
+ }
}
#if defined(RGB_DEBUGGING_ONLY)
// ONLY USE THIS FOR TESTING LEDS!
void backlight_effect_single_LED_test(void)
{
- static uint8_t color = 0; // 0,1,2 for R,G,B
- static uint8_t row = 0;
- static uint8_t column = 0;
-
- static uint8_t tick = 0;
- tick++;
-
- if ( tick > 2 )
- {
- tick = 0;
- column++;
- }
- if ( column > 14 )
- {
- column = 0;
- row++;
- }
- if ( row > 4 )
- {
- row = 0;
- color++;
- }
- if ( color > 2 )
- {
- color = 0;
- }
-
- uint8_t led;
- map_row_column_to_led( row, column, &led );
- backlight_set_color_all( 255, 255, 255 );
- backlight_test_led( led, color==0, color==1, color==2 );
+ static uint8_t color = 0; // 0,1,2 for R,G,B
+ static uint8_t row = 0;
+ static uint8_t column = 0;
+
+ static uint8_t tick = 0;
+ tick++;
+
+ if ( tick > 2 )
+ {
+ tick = 0;
+ column++;
+ }
+ if ( column > 14 )
+ {
+ column = 0;
+ row++;
+ }
+ if ( row > 4 )
+ {
+ row = 0;
+ color++;
+ }
+ if ( color > 2 )
+ {
+ color = 0;
+ }
+
+ uint8_t led;
+ map_row_column_to_led( row, column, &led );
+ backlight_set_color_all( 255, 255, 255 );
+ backlight_test_led( led, color==0, color==1, color==2 );
}
#endif // defined(RGB_DEBUGGING_ONLY)
// All LEDs off
void backlight_effect_all_off(void)
{
- backlight_set_color_all( 0, 0, 0 );
+ backlight_set_color_all( 0, 0, 0 );
}
// Solid color
void backlight_effect_solid_color(void)
{
- HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness };
- RGB rgb = hsv_to_rgb( hsv );
- backlight_set_color_all( rgb.r, rgb.g, rgb.b );
+ HSV hsv = { .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness };
+ RGB rgb = hsv_to_rgb( hsv );
+ backlight_set_color_all( rgb.r, rgb.g, rgb.b );
}
// alphas = color1, mods = color2
void backlight_effect_alphas_mods(void)
{
- RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } );
- RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } );
-
- for ( int row = 0; row < MATRIX_ROWS; row++ )
- {
- for ( int column = 0; column < MATRIX_COLS; column++ )
- {
- uint8_t index;
- map_row_column_to_led( row, column, &index );
- if ( index < BACKLIGHT_LED_COUNT )
- {
- if ( ( g_config.alphas_mods[row] & (1<<column) ) == 0 )
- {
- backlight_set_color( index, rgb1.r, rgb1.g, rgb1.b );
- }
- else
- {
- backlight_set_color( index, rgb2.r, rgb2.g, rgb2.b );
- }
- }
- }
- }
+ RGB rgb1 = hsv_to_rgb( (HSV){ .h = g_config.color_1.h, .s = g_config.color_1.s, .v = g_config.brightness } );
+ RGB rgb2 = hsv_to_rgb( (HSV){ .h = g_config.color_2.h, .s = g_config.color_2.s, .v = g_config.brightness } );
+
+ for ( int row = 0; row < MATRIX_ROWS; row++ )
+ {
+ for ( int column = 0; column < MATRIX_COLS; column++ )
+ {
+ uint8_t index;
+ map_row_column_to_led( row, column, &index );
+ if ( index < BACKLIGHT_LED_COUNT )
+ {
+ if ( ( g_config.alphas_mods[row] & (1<<column) ) == 0 )
+ {
+ backlight_set_color( index, rgb1.r, rgb1.g, rgb1.b );
+ }
+ else
+ {
+ backlight_set_color( index, rgb2.r, rgb2.g, rgb2.b );
+ }
+ }
+ }
+ }
}
void backlight_effect_gradient_up_down(void)
{
- int16_t h1 = g_config.color_1.h;
- int16_t h2 = g_config.color_2.h;
- int16_t deltaH = h2 - h1;
-
- // Take the shortest path between hues
- if ( deltaH > 127 )
- {
- deltaH -= 256;
- }
- else if ( deltaH < -127 )
- {
- deltaH += 256;
- }
- // Divide delta by 4, this gives the delta per row
- deltaH /= 4;
-
- int16_t s1 = g_config.color_1.s;
- int16_t s2 = g_config.color_2.s;
- int16_t deltaS = ( s2 - s1 ) / 4;
-
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- map_led_to_point( i, &point );
- // The y range will be 0..64, map this to 0..4
- uint8_t y = (point.y>>4);
- // Relies on hue being 8-bit and wrapping
- hsv.h = g_config.color_1.h + ( deltaH * y );
- hsv.s = g_config.color_1.s + ( deltaS * y );
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
+ int16_t h1 = g_config.color_1.h;
+ int16_t h2 = g_config.color_2.h;
+ int16_t deltaH = h2 - h1;
+
+ // Take the shortest path between hues
+ if ( deltaH > 127 )
+ {
+ deltaH -= 256;
+ }
+ else if ( deltaH < -127 )
+ {
+ deltaH += 256;
+ }
+ // Divide delta by 4, this gives the delta per row
+ deltaH /= 4;
+
+ int16_t s1 = g_config.color_1.s;
+ int16_t s2 = g_config.color_2.s;
+ int16_t deltaS = ( s2 - s1 ) / 4;
+
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ map_led_to_point( i, &point );
+ // The y range will be 0..64, map this to 0..4
+ uint8_t y = (point.y>>4);
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = g_config.color_1.h + ( deltaH * y );
+ hsv.s = g_config.color_1.s + ( deltaS * y );
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
}
void backlight_effect_raindrops(bool initialize)
{
- int16_t h1 = g_config.color_1.h;
- int16_t h2 = g_config.color_2.h;
- int16_t deltaH = h2 - h1;
- deltaH /= 4;
-
- // Take the shortest path between hues
- if ( deltaH > 127 )
- {
- deltaH -= 256;
- }
- else if ( deltaH < -127 )
- {
- deltaH += 256;
- }
-
- int16_t s1 = g_config.color_1.s;
- int16_t s2 = g_config.color_2.s;
- int16_t deltaS = ( s2 - s1 ) / 4;
-
- HSV hsv;
- RGB rgb;
-
- // Change one LED every tick
- uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
-
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- // If initialize, all get set to random colors
- // If not, all but one will stay the same as before.
- if ( initialize || i == led_to_change )
- {
- hsv.h = h1 + ( deltaH * ( rand() & 0x03 ) );
- hsv.s = s1 + ( deltaS * ( rand() & 0x03 ) );
- // Override brightness with global brightness control
- hsv.v = g_config.brightness;;
-
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
- }
+ int16_t h1 = g_config.color_1.h;
+ int16_t h2 = g_config.color_2.h;
+ int16_t deltaH = h2 - h1;
+ deltaH /= 4;
+
+ // Take the shortest path between hues
+ if ( deltaH > 127 )
+ {
+ deltaH -= 256;
+ }
+ else if ( deltaH < -127 )
+ {
+ deltaH += 256;
+ }
+
+ int16_t s1 = g_config.color_1.s;
+ int16_t s2 = g_config.color_2.s;
+ int16_t deltaS = ( s2 - s1 ) / 4;
+
+ HSV hsv;
+ RGB rgb;
+
+ // Change one LED every tick
+ uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
+
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ // If initialize, all get set to random colors
+ // If not, all but one will stay the same as before.
+ if ( initialize || i == led_to_change )
+ {
+ hsv.h = h1 + ( deltaH * ( rand() & 0x03 ) );
+ hsv.s = s1 + ( deltaS * ( rand() & 0x03 ) );
+ // Override brightness with global brightness control
+ hsv.v = g_config.brightness;;
+
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+ }
}
void backlight_effect_cycle_all(void)
{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
-
- // Relies on hue being 8-bit and wrapping
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- uint16_t offset2 = g_key_hit[i]<<2;
- // stabilizer LEDs use spacebar hits
- if ( i == 36+6 || i == 54+13 || // LC6, LD13
- ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
- {
- offset2 = g_key_hit[36+0]<<2;
- }
- offset2 = (offset2<=63) ? (63-offset2) : 0;
-
- HSV hsv = { .h = offset+offset2, .s = 255, .v = g_config.brightness };
- RGB rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+
+ // Relies on hue being 8-bit and wrapping
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ uint16_t offset2 = g_key_hit[i]<<2;
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ // stabilizer LEDs use spacebar hits
+ if ( i == 36+6 || i == 54+13 || // LC6, LD13
+ ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
+ {
+ offset2 = g_key_hit[36+0]<<2;
+ }
+#endif
+ offset2 = (offset2<=63) ? (63-offset2) : 0;
+
+ HSV hsv = { .h = offset+offset2, .s = 255, .v = g_config.brightness };
+ RGB rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
}
void backlight_effect_cycle_left_right(void)
{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- uint16_t offset2 = g_key_hit[i]<<2;
- // stabilizer LEDs use spacebar hits
- if ( i == 36+6 || i == 54+13 || // LC6, LD13
- ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
- {
- offset2 = g_key_hit[36+0]<<2;
- }
- offset2 = (offset2<=63) ? (63-offset2) : 0;
-
- map_led_to_point( i, &point );
- // Relies on hue being 8-bit and wrapping
- hsv.h = point.x + offset + offset2;
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ uint16_t offset2 = g_key_hit[i]<<2;
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ // stabilizer LEDs use spacebar hits
+ if ( i == 36+6 || i == 54+13 || // LC6, LD13
+ ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
+ {
+ offset2 = g_key_hit[36+0]<<2;
+ }
+#endif
+ offset2 = (offset2<=63) ? (63-offset2) : 0;
+
+ map_led_to_point( i, &point );
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = point.x + offset + offset2;
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
}
void backlight_effect_cycle_up_down(void)
{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- uint16_t offset2 = g_key_hit[i]<<2;
- // stabilizer LEDs use spacebar hits
- if ( i == 36+6 || i == 54+13 || // LC6, LD13
- ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
- {
- offset2 = g_key_hit[36+0]<<2;
- }
- offset2 = (offset2<=63) ? (63-offset2) : 0;
-
- map_led_to_point( i, &point );
- // Relies on hue being 8-bit and wrapping
- hsv.h = point.y + offset + offset2;
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ uint16_t offset2 = g_key_hit[i]<<2;
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
+ // stabilizer LEDs use spacebar hits
+ if ( i == 36+6 || i == 54+13 || // LC6, LD13
+ ( g_config.use_7u_spacebar && i == 54+14 ) ) // LD14
+ {
+ offset2 = g_key_hit[36+0]<<2;
+ }
+#endif
+ offset2 = (offset2<=63) ? (63-offset2) : 0;
+
+ map_led_to_point( i, &point );
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = point.y + offset + offset2;
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
}
void backlight_effect_jellybean_raindrops( bool initialize )
{
- HSV hsv;
- RGB rgb;
-
- // Change one LED every tick
- uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
-
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- // If initialize, all get set to random colors
- // If not, all but one will stay the same as before.
- if ( initialize || i == led_to_change )
- {
- hsv.h = rand() & 0xFF;
- hsv.s = rand() & 0xFF;
- // Override brightness with global brightness control
- hsv.v = g_config.brightness;;
-
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
- }
+ HSV hsv;
+ RGB rgb;
+
+ // Change one LED every tick
+ uint8_t led_to_change = ( g_tick & 0x000 ) == 0 ? rand() % BACKLIGHT_LED_COUNT : 255;
+
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ // If initialize, all get set to random colors
+ // If not, all but one will stay the same as before.
+ if ( initialize || i == led_to_change )
+ {
+ hsv.h = rand() & 0xFF;
+ hsv.s = rand() & 0xFF;
+ // Override brightness with global brightness control
+ hsv.v = g_config.brightness;;
+
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
+ }
}
void backlight_effect_cycle_radial1(void)
{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
- HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- map_led_to_point_polar( i, &point );
- // Relies on hue being 8-bit and wrapping
- hsv.h = point.x + offset;
- hsv.s = point.y;
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+ HSV hsv = { .h = 0, .s = 255, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ map_led_to_point_polar( i, &point );
+ // Relies on hue being 8-bit and wrapping
+ hsv.h = point.x + offset;
+ hsv.s = point.y;
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
}
void backlight_effect_cycle_radial2(void)
{
- uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
-
- HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness };
- RGB rgb;
- Point point;
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- map_led_to_point_polar( i, &point );
- uint8_t offset2 = offset + point.x;
- if ( offset2 & 0x80 )
- {
- offset2 = ~offset2;
- }
- offset2 = offset2 >> 2;
- hsv.h = g_config.color_1.h + offset2;
- hsv.s = 127 + ( point.y >> 1 );
- rgb = hsv_to_rgb( hsv );
- backlight_set_color( i, rgb.r, rgb.g, rgb.b );
- }
+ uint8_t offset = ( g_tick << g_config.effect_speed ) & 0xFF;
+
+ HSV hsv = { .h = 0, .s = g_config.color_1.s, .v = g_config.brightness };
+ RGB rgb;
+ Point point;
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ map_led_to_point_polar( i, &point );
+ uint8_t offset2 = offset + point.x;
+ if ( offset2 & 0x80 )
+ {
+ offset2 = ~offset2;
+ }
+ offset2 = offset2 >> 2;
+ hsv.h = g_config.color_1.h + offset2;
+ hsv.s = 127 + ( point.y >> 1 );
+ rgb = hsv_to_rgb( hsv );
+ backlight_set_color( i, rgb.r, rgb.g, rgb.b );
+ }
}
#if defined(RGB_BACKLIGHT_M6_B)
void backlight_effect_custom_colors(void)
{
- RGB rgb;
- for ( uint8_t i = 0; i < 6; i++ )
- {
- HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness };
- rgb = hsv_to_rgb( hsv );
- uint8_t led;
- map_row_column_to_led( 0, i, &led );
- backlight_set_color( led, rgb.r, rgb.g, rgb.b );
- }
+ RGB rgb;
+ for ( uint8_t i = 0; i < 6; i++ )
+ {
+ HSV hsv = { .h = g_config.custom_color[i].h, .s = g_config.custom_color[i].s, .v = g_config.brightness };
+ rgb = hsv_to_rgb( hsv );
+ uint8_t led;
+ map_row_column_to_led( 0, i, &led );
+ backlight_set_color( led, rgb.r, rgb.g, rgb.b );
+ }
}
#endif
void backlight_effect_indicators_set_colors( uint8_t index, HS color )
{
- HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness };
- RGB rgb = hsv_to_rgb( hsv );
- if ( index == 254 )
- {
- backlight_set_color_all( rgb.r, rgb.g, rgb.b );
- }
- else
- {
- backlight_set_color( index, rgb.r, rgb.g, rgb.b );
-
- // If the spacebar LED is the indicator,
- // do the same for the spacebar stabilizers
- if ( index == 36+0 ) // LC0
- {
-#if defined (RGB_BACKLIGHT_ZEAL65)
- backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7
- backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
-#elif defined (RGB_BACKLIGHT_KOYU)
- backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
- backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
-#elif defined (RGB_BACKLIGHT_ZEAL60) || defined (RGB_BACKLIGHT_M60_A)
- backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
- backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13
- if ( g_config.use_7u_spacebar )
- {
- backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
- }
+ HSV hsv = { .h = color.h, .s = color.s, .v = g_config.brightness };
+ RGB rgb = hsv_to_rgb( hsv );
+ if ( index == 254 )
+ {
+ backlight_set_color_all( rgb.r, rgb.g, rgb.b );
+ }
+ else
+ {
+ backlight_set_color( index, rgb.r, rgb.g, rgb.b );
+
+ // If the spacebar LED is the indicator,
+ // do the same for the spacebar stabilizers
+ if ( index == 36+0 ) // LC0
+ {
+#if defined(RGB_BACKLIGHT_ZEAL65)
+ backlight_set_color( 36+7, rgb.r, rgb.g, rgb.b ); // LC7
+ backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
+#elif defined(RGB_BACKLIGHT_KOYU)
+ backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
+ backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
+#elif defined(RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_M60_A)
+ backlight_set_color( 36+6, rgb.r, rgb.g, rgb.b ); // LC6
+ backlight_set_color( 54+13, rgb.r, rgb.g, rgb.b ); // LD13
+ if ( g_config.use_7u_spacebar )
+ {
+ backlight_set_color( 54+14, rgb.r, rgb.g, rgb.b ); // LD14
+ }
#endif
- }
- }
+ }
+ }
}
// This runs after another backlight effect and replaces
// colors already set
void backlight_effect_indicators(void)
{
- if ( g_config.caps_lock_indicator.index != 255 &&
- ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) ) )
- {
- backlight_effect_indicators_set_colors( g_config.caps_lock_indicator.index, g_config.caps_lock_indicator.color );
- }
-
- // This if/else if structure allows higher layers to
- // override lower ones. If we set layer 3's indicator
- // to none, then it will NOT show layer 2 or layer 1
- // indicators, even if those layers are on via the
- // MO13/MO23 Fn combo magic.
- //
- // Basically we want to handle the case where layer 3 is
- // still the backlight configuration layer and we don't
- // want "all LEDs" indicators hiding the backlight effect,
- // but still allow end users to do whatever they want.
- if ( IS_LAYER_ON(3) )
- {
- if ( g_config.layer_3_indicator.index != 255 )
- {
- backlight_effect_indicators_set_colors( g_config.layer_3_indicator.index, g_config.layer_3_indicator.color );
- }
- }
- else if ( IS_LAYER_ON(2) )
- {
- if ( g_config.layer_2_indicator.index != 255 )
- {
- backlight_effect_indicators_set_colors( g_config.layer_2_indicator.index, g_config.layer_2_indicator.color );
- }
- }
- else if ( IS_LAYER_ON(1) )
- {
- if ( g_config.layer_1_indicator.index != 255 )
- {
- backlight_effect_indicators_set_colors( g_config.layer_1_indicator.index, g_config.layer_1_indicator.color );
- }
- }
+ if ( g_config.caps_lock_indicator.index != 255 &&
+ ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) ) )
+ {
+ backlight_effect_indicators_set_colors( g_config.caps_lock_indicator.index, g_config.caps_lock_indicator.color );
+ }
+
+#if defined(RGB_BACKLIGHT_NK65)
+ if ( g_indicator_state & (1<<USB_LED_CAPS_LOCK) )
+ {
+ IS31FL3733_set_color( 7+64-1, 0, 255, 0 );
+ } else {
+ IS31FL3733_set_color( 7+64-1, 0, 0, 0 );
+ }
+ if ( g_indicator_state & (1<<USB_LED_SCROLL_LOCK) )
+ {
+ IS31FL3733_set_color( 6+64-1, 255, 0, 255 );
+ } else {
+ IS31FL3733_set_color( 6+64-1, 0, 0, 0 );
+ }
+ if ( g_indicator_state & (1<<USB_LED_NUM_LOCK) )
+ {
+ IS31FL3733_set_color( 6+64-1, 0, 255, 0 );
+ } else {
+ IS31FL3733_set_color( 6+64-1, 0, 0, 0 );
+ }
+#endif
+
+ // This if/else if structure allows higher layers to
+ // override lower ones. If we set layer 3's indicator
+ // to none, then it will NOT show layer 2 or layer 1
+ // indicators, even if those layers are on via the
+ // MO13/MO23 Fn combo magic.
+ //
+ // Basically we want to handle the case where layer 3 is
+ // still the backlight configuration layer and we don't
+ // want "all LEDs" indicators hiding the backlight effect,
+ // but still allow end users to do whatever they want.
+ if ( IS_LAYER_ON(3) )
+ {
+ if ( g_config.layer_3_indicator.index != 255 )
+ {
+ backlight_effect_indicators_set_colors( g_config.layer_3_indicator.index, g_config.layer_3_indicator.color );
+ }
+ }
+ else if ( IS_LAYER_ON(2) )
+ {
+ if ( g_config.layer_2_indicator.index != 255 )
+ {
+ backlight_effect_indicators_set_colors( g_config.layer_2_indicator.index, g_config.layer_2_indicator.color );
+ }
+ }
+ else if ( IS_LAYER_ON(1) )
+ {
+ if ( g_config.layer_1_indicator.index != 255 )
+ {
+ backlight_effect_indicators_set_colors( g_config.layer_1_indicator.index, g_config.layer_1_indicator.color );
+ }
+ }
}
-#if !defined(RGB_BACKLIGHT_HS60)
+#if !defined(RGB_BACKLIGHT_HS60) && !defined(RGB_BACKLIGHT_NK65)
ISR(TIMER3_COMPA_vect)
#else //STM32 interrupt
static void gpt_backlight_timer_task(GPTDriver *gptp)
#endif
{
- // delay 1 second before driving LEDs or doing anything else
- static uint8_t startup_tick = 0;
- if ( startup_tick < 20 )
- {
- startup_tick++;
- return;
- }
-
- g_tick++;
-
- if ( g_any_key_hit < 0xFFFFFFFF )
- {
- g_any_key_hit++;
- }
-
- for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ )
- {
- if ( g_key_hit[led] < 255 )
- {
- g_key_hit[led]++;
- }
- }
-
- // Factory default magic value
- if ( g_config.effect == 255 )
- {
- backlight_effect_rgb_test();
- return;
- }
-
- // Ideally we would also stop sending zeros to the LED driver PWM buffers
- // while suspended and just do a software shutdown. This is a cheap hack for now.
- bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) ||
- (g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20));
- uint8_t effect = suspend_backlight ? 0 : g_config.effect;
-
- // Keep track of the effect used last time,
- // detect change in effect, so each effect can
- // have an optional initialization.
- static uint8_t effect_last = 255;
- bool initialize = effect != effect_last;
- effect_last = effect;
-
- // this gets ticked at 20 Hz.
- // each effect can opt to do calculations
- // and/or request PWM buffer updates.
- switch ( effect )
- {
- case 0:
- backlight_effect_all_off();
- break;
- case 1:
- backlight_effect_solid_color();
- break;
- case 2:
+ // delay 1 second before driving LEDs or doing anything else
+ static uint8_t startup_tick = 0;
+ if ( startup_tick < 20 )
+ {
+ startup_tick++;
+ return;
+ }
+
+ g_tick++;
+
+ if ( g_any_key_hit < 0xFFFFFFFF )
+ {
+ g_any_key_hit++;
+ }
+
+ for ( int led = 0; led < BACKLIGHT_LED_COUNT; led++ )
+ {
+ if ( g_key_hit[led] < 255 )
+ {
+ g_key_hit[led]++;
+ }
+ }
+
+ // Factory default magic value
+ if ( g_config.effect == 255 )
+ {
+ backlight_effect_rgb_test();
+ return;
+ }
+
+ // Ideally we would also stop sending zeros to the LED driver PWM buffers
+ // while suspended and just do a software shutdown. This is a cheap hack for now.
+ bool suspend_backlight = ((g_suspend_state && g_config.disable_when_usb_suspended) ||
+ (g_config.disable_after_timeout > 0 && g_any_key_hit > g_config.disable_after_timeout * 60 * 20));
+ uint8_t effect = suspend_backlight ? 0 : g_config.effect;
+
+ // Keep track of the effect used last time,
+ // detect change in effect, so each effect can
+ // have an optional initialization.
+ static uint8_t effect_last = 255;
+ bool initialize = effect != effect_last;
+ effect_last = effect;
+
+ // this gets ticked at 20 Hz.
+ // each effect can opt to do calculations
+ // and/or request PWM buffer updates.
+ switch ( effect )
+ {
+ case 0:
+ backlight_effect_all_off();
+ break;
+ case 1:
+ backlight_effect_solid_color();
+ break;
+ case 2:
#if defined(RGB_BACKLIGHT_M6_B)
- backlight_effect_custom_colors();
+ backlight_effect_custom_colors();
#else
- backlight_effect_alphas_mods();
+ backlight_effect_alphas_mods();
#endif
- break;
- case 3:
- backlight_effect_gradient_up_down();
- break;
- case 4:
- backlight_effect_raindrops( initialize );
- break;
- case 5:
- backlight_effect_cycle_all();
- break;
- case 6:
- backlight_effect_cycle_left_right();
- break;
- case 7:
- backlight_effect_cycle_up_down();
- break;
- case 8:
- backlight_effect_jellybean_raindrops( initialize );
- break;
- case 9:
- backlight_effect_cycle_radial1();
- break;
- case 10:
- backlight_effect_cycle_radial2();
- break;
- default:
- backlight_effect_all_off();
- break;
- }
-
- if ( ! suspend_backlight )
- {
+ break;
+ case 3:
+ backlight_effect_gradient_up_down();
+ break;
+ case 4:
+ backlight_effect_raindrops( initialize );
+ break;
+ case 5:
+ backlight_effect_cycle_all();
+ break;
+ case 6:
+ backlight_effect_cycle_left_right();
+ break;
+ case 7:
+ backlight_effect_cycle_up_down();
+ break;
+ case 8:
+ backlight_effect_jellybean_raindrops( initialize );
+ break;
+ case 9:
+ backlight_effect_cycle_radial1();
+ break;
+ case 10:
+ backlight_effect_cycle_radial2();
+ break;
+ default:
+ backlight_effect_all_off();
+ break;
+ }
+
+ if ( ! suspend_backlight )
+ {
#if !defined(RGB_BACKLIGHT_M6_B)
- backlight_effect_indicators();
+ backlight_effect_indicators();
#endif
- }
+ }
}
void backlight_set_indicator_index( uint8_t *index, uint8_t row, uint8_t column )
{
- if ( row >= MATRIX_ROWS )
- {
- // Special value, 255=none, 254=all
- *index = row;
- }
- else
- {
- map_row_column_to_led( row, column, index );
- }
+ if ( row >= MATRIX_ROWS )
+ {
+ // Special value, 255=none, 254=all
+ *index = row;
+ }
+ else
+ {
+ map_row_column_to_led( row, column, index );
+ }
}
void backlight_get_indicator_row_col( uint8_t index, uint8_t *row, uint8_t *column )
{
- if ( index == 255 || index == 254 )
- {
- // Special value, 255=none, 254=all
- *row = index;
- *column = 0;
- return;
- }
- for ( uint8_t r = 0; r < MATRIX_ROWS; r++ )
- {
- for ( uint8_t c = 0; c < MATRIX_COLS; c++ )
- {
- uint8_t i = 255;
- map_row_column_to_led( r, c, &i );
- if ( i == index )
- {
- *row = r;
- *column = c;
- return;
- }
- }
- }
+ if ( index == 255 || index == 254 )
+ {
+ // Special value, 255=none, 254=all
+ *row = index;
+ *column = 0;
+ return;
+ }
+ for ( uint8_t r = 0; r < MATRIX_ROWS; r++ )
+ {
+ for ( uint8_t c = 0; c < MATRIX_COLS; c++ )
+ {
+ uint8_t i = 255;
+ map_row_column_to_led( r, c, &i );
+ if ( i == index )
+ {
+ *row = r;
+ *column = c;
+ return;
+ }
+ }
+ }
}
// Some helpers for setting/getting HSV
void _set_color( HS *color, uint8_t *data )
{
- color->h = data[0];
- color->s = data[1];
+ color->h = data[0];
+ color->s = data[1];
}
void _get_color( HS *color, uint8_t *data )
{
- data[0] = color->h;
- data[1] = color->s;
+ data[0] = color->h;
+ data[1] = color->s;
}
void backlight_config_set_value( uint8_t *data )
{
- bool reinitialize = false;
- uint8_t *value_id = &(data[0]);
- uint8_t *value_data = &(data[1]);
- switch ( *value_id )
- {
+ bool reinitialize = false;
+ uint8_t *value_id = &(data[0]);
+ uint8_t *value_data = &(data[1]);
+ switch ( *value_id )
+ {
#if defined (RGB_BACKLIGHT_ZEAL60) || defined(RGB_BACKLIGHT_ZEAL65)
- case id_use_split_backspace:
- {
- g_config.use_split_backspace = (bool)*value_data;
- reinitialize = true;
- break;
- }
+ case id_use_split_backspace:
+ {
+ g_config.use_split_backspace = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
#endif
#if defined (RGB_BACKLIGHT_ZEAL60)
- case id_use_split_left_shift:
- {
- g_config.use_split_left_shift = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_use_split_right_shift:
- {
- g_config.use_split_right_shift = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_use_7u_spacebar:
- {
- g_config.use_7u_spacebar = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_use_iso_enter:
- {
- g_config.use_iso_enter = (bool)*value_data;
- reinitialize = true;
- break;
- }
- case id_disable_hhkb_blocker_leds:
- {
- g_config.disable_hhkb_blocker_leds = (bool)*value_data;
- reinitialize = true;
- break;
- }
+ case id_use_split_left_shift:
+ {
+ g_config.use_split_left_shift = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_use_split_right_shift:
+ {
+ g_config.use_split_right_shift = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_use_7u_spacebar:
+ {
+ g_config.use_7u_spacebar = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_use_iso_enter:
+ {
+ g_config.use_iso_enter = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
+ case id_disable_hhkb_blocker_leds:
+ {
+ g_config.disable_hhkb_blocker_leds = (bool)*value_data;
+ reinitialize = true;
+ break;
+ }
#endif
- case id_disable_when_usb_suspended:
- {
- g_config.disable_when_usb_suspended = (bool)*value_data;
- break;
- }
- case id_disable_after_timeout:
- {
- g_config.disable_after_timeout = *value_data;
- break;
- }
- case id_brightness:
- {
- g_config.brightness = *value_data;
- break;
- }
- case id_effect:
- {
- g_config.effect = *value_data;
- break;
- }
- case id_effect_speed:
- {
- g_config.effect_speed = *value_data;
- break;
- }
- case id_color_1:
- {
- _set_color( &(g_config.color_1), value_data );
- break;
- }
- case id_color_2:
- {
- _set_color( &(g_config.color_2), value_data );
- break;
- }
- case id_caps_lock_indicator_color:
- {
- _set_color( &(g_config.caps_lock_indicator.color), value_data );
- break;
- }
- case id_caps_lock_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_layer_1_indicator_color:
- {
- _set_color( &(g_config.layer_1_indicator.color), value_data );
- break;
- }
- case id_layer_1_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_layer_2_indicator_color:
- {
- _set_color( &(g_config.layer_2_indicator.color), value_data );
- break;
- }
- case id_layer_2_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_layer_3_indicator_color:
- {
- _set_color( &(g_config.layer_3_indicator.color), value_data );
- break;
- }
- case id_layer_3_indicator_row_col:
- {
- backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] );
- break;
- }
- case id_alphas_mods:
- {
- for ( int i=0; i<5; i++ )
- {
- g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) );
- }
- }
+ case id_disable_when_usb_suspended:
+ {
+ g_config.disable_when_usb_suspended = (bool)*value_data;
+ break;
+ }
+ case id_disable_after_timeout:
+ {
+ g_config.disable_after_timeout = *value_data;
+ break;
+ }
+ case id_brightness:
+ {
+ g_config.brightness = *value_data;
+ break;
+ }
+ case id_effect:
+ {
+ g_config.effect = *value_data;
+ break;
+ }
+ case id_effect_speed:
+ {
+ g_config.effect_speed = *value_data;
+ break;
+ }
+ case id_color_1:
+ {
+ _set_color( &(g_config.color_1), value_data );
+ break;
+ }
+ case id_color_2:
+ {
+ _set_color( &(g_config.color_2), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_color:
+ {
+ _set_color( &(g_config.caps_lock_indicator.color), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.caps_lock_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_layer_1_indicator_color:
+ {
+ _set_color( &(g_config.layer_1_indicator.color), value_data );
+ break;
+ }
+ case id_layer_1_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.layer_1_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_layer_2_indicator_color:
+ {
+ _set_color( &(g_config.layer_2_indicator.color), value_data );
+ break;
+ }
+ case id_layer_2_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.layer_2_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_layer_3_indicator_color:
+ {
+ _set_color( &(g_config.layer_3_indicator.color), value_data );
+ break;
+ }
+ case id_layer_3_indicator_row_col:
+ {
+ backlight_set_indicator_index( &(g_config.layer_3_indicator.index), value_data[0], value_data[1] );
+ break;
+ }
+ case id_alphas_mods:
+ {
+ for ( int i=0; i<5; i++ )
+ {
+ g_config.alphas_mods[i] = ( *(value_data+i*2) << 8 ) | ( *(value_data+i*2+1) );
+ }
+ }
#if defined(RGB_BACKLIGHT_M6_B)
- case id_custom_color:
- {
- uint8_t index = value_data[0];
- if ( index >= 0 && index <= 6 )
- {
- _set_color( &(g_config.custom_color[index]), &(value_data[1]) );
- }
- }
+ case id_custom_color:
+ {
+ uint8_t index = value_data[0];
+ if ( index >= 0 && index <= 6 )
+ {
+ _set_color( &(g_config.custom_color[index]), &(value_data[1]) );
+ }
+ }
#endif
- }
+ }
- if ( reinitialize )
- {
- backlight_init_drivers();
- }
+ if ( reinitialize )
+ {
+ backlight_init_drivers();
+ }
}
void backlight_config_get_value( uint8_t *data )
{
- uint8_t *value_id = &(data[0]);
- uint8_t *value_data = &(data[1]);
- switch ( *value_id )
- {
- case id_use_split_backspace:
- {
- *value_data = ( g_config.use_split_backspace ? 1 : 0 );
- break;
- }
- case id_use_split_left_shift:
- {
- *value_data = ( g_config.use_split_left_shift ? 1 : 0 );
- break;
- }
- case id_use_split_right_shift:
- {
- *value_data = ( g_config.use_split_right_shift ? 1 : 0 );
- break;
- }
- case id_use_7u_spacebar:
- {
- *value_data = ( g_config.use_7u_spacebar ? 1 : 0 );
- break;
- }
- case id_use_iso_enter:
- {
- *value_data = ( g_config.use_iso_enter ? 1 : 0 );
- break;
- }
- case id_disable_when_usb_suspended:
- {
- *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 );
- break;
- }
- case id_disable_hhkb_blocker_leds:
- {
- *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 );
- break;
- }
- case id_disable_after_timeout:
- {
- *value_data = g_config.disable_after_timeout;
- break;
- }
- case id_brightness:
- {
- *value_data = g_config.brightness;
- break;
- }
- case id_effect:
- {
- *value_data = g_config.effect;
- break;
- }
- case id_effect_speed:
- {
- *value_data = g_config.effect_speed;
- break;
- }
- case id_color_1:
- {
- _get_color( &(g_config.color_1), value_data );
- break;
- }
- case id_color_2:
- {
- _get_color( &(g_config.color_2), value_data );
- break;
- }
- case id_caps_lock_indicator_color:
- {
- _get_color( &(g_config.caps_lock_indicator.color), value_data );
- break;
- }
- case id_caps_lock_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_layer_1_indicator_color:
- {
- _get_color( &(g_config.layer_1_indicator.color), value_data );
- break;
- }
- case id_layer_1_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_layer_2_indicator_color:
- {
- _get_color( &(g_config.layer_2_indicator.color), value_data );
- break;
- }
- case id_layer_2_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_layer_3_indicator_color:
- {
- _get_color( &(g_config.layer_3_indicator.color), value_data );
- break;
- }
- case id_layer_3_indicator_row_col:
- {
- backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) );
- break;
- }
- case id_alphas_mods:
- {
- for ( int i=0; i<5; i++ )
- {
- *(value_data+i*2) = g_config.alphas_mods[i] >> 8;
- *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF;
- }
- }
+ uint8_t *value_id = &(data[0]);
+ uint8_t *value_data = &(data[1]);
+ switch ( *value_id )
+ {
+ case id_use_split_backspace:
+ {
+ *value_data = ( g_config.use_split_backspace ? 1 : 0 );
+ break;
+ }
+ case id_use_split_left_shift:
+ {
+ *value_data = ( g_config.use_split_left_shift ? 1 : 0 );
+ break;
+ }
+ case id_use_split_right_shift:
+ {
+ *value_data = ( g_config.use_split_right_shift ? 1 : 0 );
+ break;
+ }
+ case id_use_7u_spacebar:
+ {
+ *value_data = ( g_config.use_7u_spacebar ? 1 : 0 );
+ break;
+ }
+ case id_use_iso_enter:
+ {
+ *value_data = ( g_config.use_iso_enter ? 1 : 0 );
+ break;
+ }
+ case id_disable_when_usb_suspended:
+ {
+ *value_data = ( g_config.disable_when_usb_suspended ? 1 : 0 );
+ break;
+ }
+ case id_disable_hhkb_blocker_leds:
+ {
+ *value_data = ( g_config.disable_hhkb_blocker_leds ? 1 : 0 );
+ break;
+ }
+ case id_disable_after_timeout:
+ {
+ *value_data = g_config.disable_after_timeout;
+ break;
+ }
+ case id_brightness:
+ {
+ *value_data = g_config.brightness;
+ break;
+ }
+ case id_effect:
+ {
+ *value_data = g_config.effect;
+ break;
+ }
+ case id_effect_speed:
+ {
+ *value_data = g_config.effect_speed;
+ break;
+ }
+ case id_color_1:
+ {
+ _get_color( &(g_config.color_1), value_data );
+ break;
+ }
+ case id_color_2:
+ {
+ _get_color( &(g_config.color_2), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_color:
+ {
+ _get_color( &(g_config.caps_lock_indicator.color), value_data );
+ break;
+ }
+ case id_caps_lock_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.caps_lock_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_layer_1_indicator_color:
+ {
+ _get_color( &(g_config.layer_1_indicator.color), value_data );
+ break;
+ }
+ case id_layer_1_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.layer_1_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_layer_2_indicator_color:
+ {
+ _get_color( &(g_config.layer_2_indicator.color), value_data );
+ break;
+ }
+ case id_layer_2_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.layer_2_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_layer_3_indicator_color:
+ {
+ _get_color( &(g_config.layer_3_indicator.color), value_data );
+ break;
+ }
+ case id_layer_3_indicator_row_col:
+ {
+ backlight_get_indicator_row_col( g_config.layer_3_indicator.index, &(value_data[0]), &(value_data[1]) );
+ break;
+ }
+ case id_alphas_mods:
+ {
+ for ( int i=0; i<5; i++ )
+ {
+ *(value_data+i*2) = g_config.alphas_mods[i] >> 8;
+ *(value_data+i*2+1) = g_config.alphas_mods[i] & 0xFF;
+ }
+ }
#if defined(RGB_BACKLIGHT_M6_B)
- case id_custom_color:
- {
- uint8_t index = value_data[0];
- if ( index >= 0 && index <= 6 )
- {
- _get_color( &(g_config.custom_color[index]), &(value_data[1]) );
- }
- }
+ case id_custom_color:
+ {
+ uint8_t index = value_data[0];
+ if ( index >= 0 && index <= 6 )
+ {
+ _get_color( &(g_config.custom_color[index]), &(value_data[1]) );
+ }
+ }
#endif
- }
+ }
}
void backlight_config_set_alphas_mods( uint16_t *alphas_mods )
{
- for ( int i=0; i<5; i++ )
- {
- g_config.alphas_mods[i] = alphas_mods[i];
- }
+ for ( int i=0; i<5; i++ )
+ {
+ g_config.alphas_mods[i] = alphas_mods[i];
+ }
- backlight_config_save();
+ backlight_config_save();
}
void backlight_config_load(void)
{
- eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
+ eeprom_read_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
}
void backlight_config_save(void)
{
- eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
+ eeprom_update_block( &g_config, ((void*)RGB_BACKLIGHT_CONFIG_EEPROM_ADDR), sizeof(backlight_config) );
}
void backlight_init_drivers(void)
{
- // Initialize I2C
- i2c_init();
+ // Initialize I2C
+ i2c_init();
#if defined(RGB_BACKLIGHT_M6_B)
- IS31FL3218_init();
+ IS31FL3218_init();
#elif defined(RGB_BACKLIGHT_HS60)
- IS31FL3733_init( ISSI_ADDR_1 );
-
- for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ )
- {
-#if defined (HS60_ANSI)
- bool enabled = !( ( index == 48-1 ) || //LA48
- ( index == 51-1 ) || //LA51
- ( index == 61-1 ) ); //LA61
-#elif defined (HS60_HHKB)
- bool enabled = !( ( index == 61-1 ) || //LA61
- ( index == 62-1 ) ); //LA62
+ IS31FL3733_init( ISSI_ADDR_1, 0 );
+
+ for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
+ {
+#if defined(HS60_ANSI)
+ bool enabled = !( ( index == 48-1 ) || //LA48
+ ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
+#elif defined(HS60_HHKB)
+ bool enabled = !( ( index == 61-1 ) || //LA61
+ ( index == 62-1 ) ); //LA62
#else //HS60_ISO
- bool enabled = !( ( index == 51-1 ) || //LA51
- ( index == 61-1 ) ); //LA61
+ bool enabled = !( ( index == 51-1 ) || //LA51
+ ( index == 61-1 ) ); //LA61
#endif
- // This only caches it for later
- IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
- }
- // This actually updates the LED drivers
- IS31FL3733_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+ // This only caches it for later
+ IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ // This actually updates the LED drivers
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+#elif defined(RGB_BACKLIGHT_NK65)
+ IS31FL3733_init( ISSI_ADDR_1, 0 );
+ IS31FL3733_init( ISSI_ADDR_2, 0 );
+
+ for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
+ {
+ bool enabled = !( ( index == 61-1 ) || //LA61
+ ( index > 6+64-1 ) ); //LB7-LB64
+ // This only caches it for later
+ IS31FL3733_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ IS31FL3733_set_led_control_register( 7+64-1, 0, 1, 0 ); //Enable LB7 green enable for indicators
+ // This actually updates the LED drivers
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_1, 0 );
+ IS31FL3733_update_led_control_registers( ISSI_ADDR_2, 1 );
#else
- IS31FL3731_init( ISSI_ADDR_1 );
- IS31FL3731_init( ISSI_ADDR_2 );
-
- for ( int index = 0; index < BACKLIGHT_LED_COUNT; index++ )
- {
- // OR the possible "disabled" cases together, then NOT the result to get the enabled state
- // LC6 LD13 not present on Zeal65
-#if defined (RGB_BACKLIGHT_ZEAL65)
- bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
- ( index == 36+6 ) || // LC6
- ( index == 54+13 ) ); // LD13
-#elif defined (RGB_BACKLIGHT_KOYU)
- bool enabled = !( ( index == 36+15 ) || // LC15
- ( index == 54+13 ) || // LD13
- ( index == 54+17 ) ); // LD17
-#elif defined (RGB_BACKLIGHT_M60_A)
- bool enabled = !(
- // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A
- ( index == 18+6 ) || // LB6
- ( index == 18+7 ) || // LB7
- ( index == 18+8 ) || // LB8
- ( index == 18+15 ) || // LB15
- ( index == 18+16 ) || // LB16
- ( index == 18+17 ) || // LB17
- // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A
- ( index == 36+17 ) || // LC17
- ( index == 54+17 ) || // LD17
- ( index == 36+15 ) || // LC15
- ( index == 54+13 ) ); // LD13
-#elif defined (RGB_BACKLIGHT_ZEAL60)
- // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60
- bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
- ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15
- ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8
- ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13
- ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17
- ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17
- ( index == 18+6 ) || // LB6
- ( index == 18+7 ) || // LB7
- ( index == 18+8 ) || // LB8
- ( index == 18+15 ) || // LB15
- ( index == 18+16 ) || // LB16
- ( index == 18+17 ) ); // LB17
+ IS31FL3731_init( ISSI_ADDR_1 );
+ IS31FL3731_init( ISSI_ADDR_2 );
+
+ for ( int index = 0; index < DRIVER_LED_TOTAL; index++ )
+ {
+ // OR the possible "disabled" cases together, then NOT the result to get the enabled state
+ // LC6 LD13 not present on Zeal65
+#if defined(RGB_BACKLIGHT_ZEAL65)
+ bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
+ ( index == 36+6 ) || // LC6
+ ( index == 54+13 ) ); // LD13
+#elif defined(RGB_BACKLIGHT_KOYU)
+ bool enabled = !( ( index == 36+15 ) || // LC15
+ ( index == 54+13 ) || // LD13
+ ( index == 54+17 ) ); // LD17
+#elif defined(RGB_BACKLIGHT_M60_A)
+ bool enabled = !(
+ // LB6 LB7 LB8 LB15 LB16 LB17 not present on M60-A
+ ( index == 18+6 ) || // LB6
+ ( index == 18+7 ) || // LB7
+ ( index == 18+8 ) || // LB8
+ ( index == 18+15 ) || // LB15
+ ( index == 18+16 ) || // LB16
+ ( index == 18+17 ) || // LB17
+ // HHKB blockers (LC17, LD17) and ISO extra keys (LC15,LD13) not present on M60-A
+ ( index == 36+17 ) || // LC17
+ ( index == 54+17 ) || // LD17
+ ( index == 36+15 ) || // LC15
+ ( index == 54+13 ) ); // LD13
+#elif defined(RGB_BACKLIGHT_ZEAL60)
+ // LB6 LB7 LB8 LB15 LB16 LB17 not present on Zeal60
+ bool enabled = !( ( index == 18+5 && !g_config.use_split_backspace ) || // LB5
+ ( index == 36+15 && !g_config.use_split_left_shift ) || // LC15
+ ( index == 54+8 && !g_config.use_split_right_shift ) || // LD8
+ ( index == 54+13 && g_config.use_7u_spacebar ) || // LD13
+ ( index == 36+17 && g_config.disable_hhkb_blocker_leds ) || // LC17
+ ( index == 54+17 && g_config.disable_hhkb_blocker_leds ) || // LD17
+ ( index == 18+6 ) || // LB6
+ ( index == 18+7 ) || // LB7
+ ( index == 18+8 ) || // LB8
+ ( index == 18+15 ) || // LB15
+ ( index == 18+16 ) || // LB16
+ ( index == 18+17 ) ); // LB17
#endif
- // This only caches it for later
- IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
- }
- // This actually updates the LED drivers
- IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
+ // This only caches it for later
+ IS31FL3731_set_led_control_register( index, enabled, enabled, enabled );
+ }
+ // This actually updates the LED drivers
+ IS31FL3731_update_led_control_registers( ISSI_ADDR_1, ISSI_ADDR_2 );
#endif // !defined(RGB_BACKLIGHT_M6_B)
- // TODO: put the 1 second startup delay here?
+ // TODO: put the 1 second startup delay here?
- // clear the key hits
- for ( int led=0; led<BACKLIGHT_LED_COUNT; led++ )
- {
- g_key_hit[led] = 255;
- }
+ // clear the key hits
+ for ( int led=0; led<BACKLIGHT_LED_COUNT; led++ )
+ {
+ g_key_hit[led] = 255;
+ }
}
bool process_record_backlight(uint16_t keycode, keyrecord_t *record)
{
- // Record keypresses for backlight effects
- if ( record->event.pressed )
- {
- backlight_set_key_hit( record->event.key.row, record->event.key.col );
- }
-
- switch(keycode)
- {
- case BR_INC:
- if (record->event.pressed)
- {
- backlight_brightness_increase();
- }
- return false;
- break;
- case BR_DEC:
- if (record->event.pressed)
- {
- backlight_brightness_decrease();
- }
- return false;
- break;
- case EF_INC:
- if (record->event.pressed)
- {
- backlight_effect_increase();
- }
- return false;
- break;
- case EF_DEC:
- if (record->event.pressed)
- {
- backlight_effect_decrease();
- }
- return false;
- break;
- case ES_INC:
- if (record->event.pressed)
- {
- backlight_effect_speed_increase();
- }
- return false;
- break;
- case ES_DEC:
- if (record->event.pressed)
- {
- backlight_effect_speed_decrease();
- }
- return false;
- break;
- case H1_INC:
- if (record->event.pressed)
- {
- backlight_color_1_hue_increase();
- }
- return false;
- break;
- case H1_DEC:
- if (record->event.pressed)
- {
- backlight_color_1_hue_decrease();
- }
- return false;
- break;
- case S1_INC:
- if (record->event.pressed)
- {
- backlight_color_1_sat_increase();
- }
- return false;
- break;
- case S1_DEC:
- if (record->event.pressed)
- {
- backlight_color_1_sat_decrease();
- break;
- }
- return false;
- break;
- case H2_INC:
- if (record->event.pressed)
- {
- backlight_color_2_hue_increase();
- }
- return false;
- break;
- case H2_DEC:
- if (record->event.pressed)
- {
- backlight_color_2_hue_decrease();
- }
- return false;
- break;
- case S2_INC:
- if (record->event.pressed)
- {
- backlight_color_2_sat_increase();
- }
- return false;
- break;
- case S2_DEC:
- if (record->event.pressed)
- {
- backlight_color_2_sat_decrease();
- break;
- }
- return false;
- break;
- }
-
- return true;
+ // Record keypresses for backlight effects
+ if ( record->event.pressed )
+ {
+ backlight_set_key_hit( record->event.key.row, record->event.key.col );
+ }
+
+ switch(keycode)
+ {
+ case BR_INC:
+ if (record->event.pressed)
+ {
+ backlight_brightness_increase();
+ }
+ return false;
+ break;
+ case BR_DEC:
+ if (record->event.pressed)
+ {
+ backlight_brightness_decrease();
+ }
+ return false;
+ break;
+ case EF_INC:
+ if (record->event.pressed)
+ {
+ backlight_effect_increase();
+ }
+ return false;
+ break;
+ case EF_DEC:
+ if (record->event.pressed)
+ {
+ backlight_effect_decrease();
+ }
+ return false;
+ break;
+ case ES_INC:
+ if (record->event.pressed)
+ {
+ backlight_effect_speed_increase();
+ }
+ return false;
+ break;
+ case ES_DEC:
+ if (record->event.pressed)
+ {
+ backlight_effect_speed_decrease();
+ }
+ return false;
+ break;
+ case H1_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_hue_increase();
+ }
+ return false;
+ break;
+ case H1_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_hue_decrease();
+ }
+ return false;
+ break;
+ case S1_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_sat_increase();
+ }
+ return false;
+ break;
+ case S1_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_1_sat_decrease();
+ break;
+ }
+ return false;
+ break;
+ case H2_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_hue_increase();
+ }
+ return false;
+ break;
+ case H2_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_hue_decrease();
+ }
+ return false;
+ break;
+ case S2_INC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_sat_increase();
+ }
+ return false;
+ break;
+ case S2_DEC:
+ if (record->event.pressed)
+ {
+ backlight_color_2_sat_decrease();
+ break;
+ }
+ return false;
+ break;
+ }
+
+ return true;
}
// Deals with the messy details of incrementing an integer
uint8_t increment( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
{
- int16_t new_value = value;
- new_value += step;
- return MIN( MAX( new_value, min ), max );
+ int16_t new_value = value;
+ new_value += step;
+ return MIN( MAX( new_value, min ), max );
}
uint8_t decrement( uint8_t value, uint8_t step, uint8_t min, uint8_t max )
{
- int16_t new_value = value;
- new_value -= step;
- return MIN( MAX( new_value, min ), max );
+ int16_t new_value = value;
+ new_value -= step;
+ return MIN( MAX( new_value, min ), max );
}
void backlight_effect_increase(void)
{
- g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
- backlight_config_save();
+ g_config.effect = increment( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
+ backlight_config_save();
}
void backlight_effect_decrease(void)
{
- g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
- backlight_config_save();
+ g_config.effect = decrement( g_config.effect, 1, 0, BACKLIGHT_EFFECT_MAX );
+ backlight_config_save();
}
void backlight_effect_speed_increase(void)
{
- g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 );
- backlight_config_save();
+ g_config.effect_speed = increment( g_config.effect_speed, 1, 0, 3 );
+ backlight_config_save();
}
void backlight_effect_speed_decrease(void)
{
- g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 );
- backlight_config_save();
+ g_config.effect_speed = decrement( g_config.effect_speed, 1, 0, 3 );
+ backlight_config_save();
}
void backlight_brightness_increase(void)
{
- g_config.brightness = increment( g_config.brightness, 8, 0, 255 );
- backlight_config_save();
+ g_config.brightness = increment( g_config.brightness, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_brightness_decrease(void)
{
- g_config.brightness = decrement( g_config.brightness, 8, 0, 255 );
- backlight_config_save();
+ g_config.brightness = decrement( g_config.brightness, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_1_hue_increase(void)
{
- g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_1.h = increment( g_config.color_1.h, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_1_hue_decrease(void)
{
- g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_1.h = decrement( g_config.color_1.h, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_1_sat_increase(void)
{
- g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_1.s = increment( g_config.color_1.s, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_1_sat_decrease(void)
{
- g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_1.s = decrement( g_config.color_1.s, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_2_hue_increase(void)
{
- g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_2.h = increment( g_config.color_2.h, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_2_hue_decrease(void)
{
- g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_2.h = decrement( g_config.color_2.h, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_2_sat_increase(void)
{
- g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_2.s = increment( g_config.color_2.s, 8, 0, 255 );
+ backlight_config_save();
}
void backlight_color_2_sat_decrease(void)
{
- g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 );
- backlight_config_save();
+ g_config.color_2.s = decrement( g_config.color_2.s, 8, 0, 255 );
+ backlight_config_save();
}
#if defined(RGB_DEBUGGING_ONLY)
void backlight_test_led( uint8_t index, bool red, bool green, bool blue )
{
- for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
- {
- if ( i == index )
- {
- IS31FL3731_set_led_control_register( i, red, green, blue );
- }
- else
- {
- IS31FL3731_set_led_control_register( i, false, false, false );
- }
- }
+ for ( int i=0; i<BACKLIGHT_LED_COUNT; i++ )
+ {
+ if ( i == index )
+ {
+ IS31FL3731_set_led_control_register( i, red, green, blue );
+ }
+ else
+ {
+ IS31FL3731_set_led_control_register( i, false, false, false );
+ }
+ }
}
void backlight_debug_led( bool state )
{
- if (state)
- {
- // Output high.
- DDRE |= (1<<6);
- PORTE |= (1<<6);
- }
- else
- {
- // Output low.
- DDRE &= ~(1<<6);
- PORTE &= ~(1<<6);
- }
+ if (state)
+ {
+ // Output high.
+ DDRE |= (1<<6);
+ PORTE |= (1<<6);
+ }
+ else
+ {
+ // Output low.
+ DDRE &= ~(1<<6);
+ PORTE &= ~(1<<6);
+ }
}
#endif // defined(RGB_DEBUGGING_ONLY)
projects / qmk_firmware.git / commitdiff