dynamic_keymap_set_keycode( command_data[0], command_data[1], command_data[2], ( command_data[3] << 8 ) | command_data[4] );
break;
}
- case id_dynamic_keymap_clear_all:
+ case id_dynamic_keymap_reset:
{
- dynamic_keymap_clear_all();
+ dynamic_keymap_reset();
break;
}
#endif // DYNAMIC_KEYMAP_ENABLE
#endif // RGB_BACKLIGHT_ENABLED
#ifdef DYNAMIC_KEYMAP_ENABLE
- // This saves "empty" keymaps so it falls back to the keymaps
- // in the firmware (aka. progmem/flash)
- dynamic_keymap_clear_all();
+ // This resets the keymaps in EEPROM to what is in flash.
+ dynamic_keymap_reset();
#endif
// Save the magic number last, in case saving was interrupted
#include "config.h"
#include "keymap.h" // to get keymaps[][][]
+#include "tmk_core/common/eeprom.h"
+#include "progmem.h"// to read default from flash
#include "dynamic_keymap.h"
#error DYNAMIC_KEYMAP_LAYER_COUNT not defined
#endif
-#define KC_EENULL 0xFFFF // TODO: move to enum quantum_keycodes
-
void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column)
{
// TODO: optimize this with some left shifts
eeprom_update_byte(address+1, (uint8_t)(keycode & 0xFF));
}
-void dynamic_keymap_clear_all(void)
+void dynamic_keymap_reset(void)
{
- // Save "empty" keymaps.
- for ( int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++ )
- {
- for ( int row = 0; row < MATRIX_ROWS; row++ )
- {
- for ( int column = 0; column < MATRIX_COLS; column++ )
- {
- dynamic_keymap_set_keycode(layer, row, column, KC_EENULL);
+ // Reset the keymaps in EEPROM to what is in flash.
+ // All keyboards using dynamic keymaps should define a layout
+ // for the same number of layers as DYNAMIC_KEYMAP_LAYER_COUNT.
+ for ( int layer = 0; layer < DYNAMIC_KEYMAP_LAYER_COUNT; layer++ ) {
+ for ( int row = 0; row < MATRIX_ROWS; row++ ) {
+ for ( int column = 0; column < MATRIX_COLS; column++ ) {
+ dynamic_keymap_set_keycode(layer, row, column, pgm_read_word(&keymaps[layer][row][column]));
}
}
}
// This overrides the one in quantum/keymap_common.c
uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
{
- // This used to test EEPROM for magic bytes, but it was redundant.
- // Test for EEPROM usage change (fresh install, address change, etc.)
- // externally and call dynamic_keymap_default_save()
if ( layer < DYNAMIC_KEYMAP_LAYER_COUNT &&
- key.row < MATRIX_ROWS && // possibly redundant
- key.col < MATRIX_COLS ) // possibly redundant
- {
- uint16_t keycode = dynamic_keymap_get_keycode(layer, key.row, key.col);
-
- // If keycode is not "empty", return it, otherwise
- // drop down to return the one in flash
- if ( keycode != KC_EENULL)
- {
- return keycode;
- }
+ key.row < MATRIX_ROWS &&
+ key.col < MATRIX_COLS ) {
+ return dynamic_keymap_get_keycode(layer, key.row, key.col);
+ } else {
+ return KC_NO;
}
-
- return pgm_read_word(&keymaps[layer][key.row][key.col]);
}
#endif // DYNAMIC_KEYMAP_ENABLE
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-
-#ifndef DYNAMIC_KEYMAP_H
-#define DYNAMIC_KEYMAP_H
+#pragma once
#include <stdint.h>
#include <stdbool.h>
void *dynamic_keymap_key_to_eeprom_address(uint8_t layer, uint8_t row, uint8_t column);
uint16_t dynamic_keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t column);
void dynamic_keymap_set_keycode(uint8_t layer, uint8_t row, uint8_t column, uint16_t keycode);
-void dynamic_keymap_clear_all(void);
+void dynamic_keymap_reset(void);
// This overrides the one in quantum/keymap_common.c
// uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t key);
-#endif //DYNAMIC_KEYMAP_H