COLEMAK,
DVORAK,
PLOVER,
- EXT_PLV
+ EXT_PLV,
+ LED_1,
+ LED_2,
+ LED_3,
+ LED_4,
+ LED_5,
+ LED_6,
+ LED_7,
+ LED_8,
+ LED_9,
+ LED_0
};
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
+// array of keys considered modifiers for led purposes
+const uint16_t modifiers[] = {
+ KC_LCTL,
+ KC_RCTL,
+ KC_LALT,
+ KC_RALT,
+ KC_LSFT,
+ KC_RSFT,
+ KC_LGUI,
+ KC_RGUI,
+ LOWER,
+ RAISE
+};
+
+//Setup consts for LED modes
+#define LEDMODE_ON 1 //always on
+#define LEDMODE_OFF 0 //always off
+#define LEDMODE_MODS 2 //On with modifiers
+#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress
+#define LEDMODE_KEY 4 //On with any keypress, off with key release
+#define LEDMODE_ENTER 5 // On with enter key
+
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
/* Adjust (Lower + Raise)
* ,-----------------------------------------------------------------------------------.
- * | | Reset| | | | | | | | | | Del |
+ * |Reset | | | | | | | | | | | Del |
* |------+------+------+------+------+-------------+------+------+------+------+------|
* | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| |
* |------+------+------+------+------+------|------+------+------+------+------+------|
* `-----------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT_plaid_grid(
- _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL ,
+ RESET,LED_1, LED_2, LED_3, LED_4, LED_5,LED_6, LED_7, LED_8, LED_9, LED_0,KC_DEL ,
_______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______,
_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
};
+//Setup config struct for LED
+typedef union {
+ uint32_t raw;
+ struct {
+ uint8_t red_mode :8;
+ uint8_t green_mode :8;
+ };
+} led_config_t;
+led_config_t led_config;
+
+//Set leds to saved state during powerup
+void keyboard_post_init_user(void) {
+ // Call the post init code.
+ led_config.raw = eeconfig_read_user();
+
+ if(led_config.red_mode == LEDMODE_ON) {
+ writePinHigh(LED_RED);
+ }
+
+ if(led_config.green_mode == LEDMODE_ON) {
+ writePinHigh(LED_GREEN);
+ }
+}
+
+void eeconfig_init_user(void) { // EEPROM is getting reset!
+ led_config.raw = 0;
+ led_config.red_mode = LEDMODE_ON;
+ led_config.green_mode = LEDMODE_MODS;
+ eeconfig_update_user(led_config.raw);
+ eeconfig_update_user(led_config.raw);
+}
+
uint32_t layer_state_set_user(uint32_t state) {
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
}
+void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) {
+ switch (led_mode) {
+ case LEDMODE_MODS:
+ for (int i=0;i<sizeof(modifiers) / sizeof(modifiers[0]);i++) {
+ if(keycode==modifiers[i]) {
+ if (record->event.pressed) {
+ writePinHigh(led);
+ }
+ else {
+ writePinLow(led);
+ }
+ }
+ }
+ break;
+ case LEDMODE_BLINKIN:
+ if (record->event.pressed) {
+ if(rand() % 2 == 1) {
+ if(rand() % 2 == 0) {
+ writePinLow(led);
+ }
+ else {
+ writePinHigh(led);
+ }
+ }
+ }
+ break;
+ case LEDMODE_KEY:
+ if (record->event.pressed) {
+ writePinHigh(led);
+ return;
+ }
+ else {
+ writePinLow(led);
+ return;
+ }
+ break;
+ case LEDMODE_ENTER:
+ if (keycode==KC_ENT) {
+ writePinHigh(led);
+ }
+ else {
+ writePinLow(led);
+ }
+ break;
+
+ }
+}
+
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ /* If the either led mode is keypressed based, call the led updater
+ then let it fall through the keypress handlers. Just to keep
+ the logic out of this procedure */
+ if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) {
+ led_keypress_update(LED_RED, led_config.red_mode, keycode, record);
+ }
+ if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) {
+ led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record);
+ }
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
}
return false;
break;
+ case LED_1:
+ if (record->event.pressed) {
+ if (led_config.red_mode==LEDMODE_ON) {
+ led_config.red_mode=LEDMODE_OFF;
+ writePinLow(LED_RED);
+ }
+ else {
+ led_config.red_mode=LEDMODE_ON;
+ writePinHigh(LED_RED);
+ }
+ }
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_2:
+ if (record->event.pressed) {
+ if (led_config.green_mode==LEDMODE_ON) {
+ led_config.green_mode=LEDMODE_OFF;
+ writePinLow(LED_GREEN);
+ }
+ else {
+ led_config.green_mode=LEDMODE_ON;
+ writePinHigh(LED_GREEN);
+ }
+ }
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_3:
+ led_config.red_mode=LEDMODE_MODS;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_4:
+ led_config.green_mode=LEDMODE_MODS;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_5:
+ led_config.red_mode=LEDMODE_BLINKIN;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_6:
+ led_config.green_mode=LEDMODE_BLINKIN;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_7:
+ led_config.red_mode=LEDMODE_KEY;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_8:
+ led_config.green_mode=LEDMODE_KEY;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_9:
+ led_config.red_mode=LEDMODE_ENTER;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
+ case LED_0:
+ led_config.green_mode=LEDMODE_ENTER;
+ eeconfig_update_user(led_config.raw);
+ return false;
+ break;
}
return true;
}
# The default keymap for plaid
-folk from planck
+Original copyright 2019 Takuya Urakawa (dm9records.com)
+LED Support added by Richard Sutherland (rich@brickbots.com)
+
+This layout is based on the Planck layout, and includes an adjust layer (6)
+accessible by holding the lower and raise modifiers (MO3 and MO4) together.
+The adjustment layer is used to set the behavior of the two LEDs:
+
+Modifier Mode:
+
+Activates when any modifier (shift, alt, os, MO) key is held
+down. LED turns off when key is release
+
+Blinkinlights Mode:
+Random chance of state change on each keystroke.
+
+Keypress Mode:
+On for any keypress as long as the key is pressed
+
+Carriage Mode:
+Turns on when enter is pressed, turns off when any next key is pressed
+
+q = Toggle Red LED state, deactivates any other modes
+w = Toggle Green LED state, deactivates any other modes
+e = Set RED LED to modifier mode
+r = Set GREEN LED to modifier mode
+t = Set RED LED to Blinkinlights mode
+y = set GREEN LED to Blinkinlights mode
+u = set RED LED to Keypress mode
+i = set GREEN LED to Keypress mode
+o = set RED LED to Carriage mode
+p = set GREEN LED to Carriage mode
projects / qmk_firmware.git / commitdiff