--- /dev/null
+#include "3x6.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { R05, R04, R03, R02, R01, R00 }, \
+ { R15, R14, R13, R12, R11, R10 }, \
+ { R25, R24, R23, R22, R21, R20 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 70
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | | N | M | , | . | / | \ |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS
+ ),
+
+ /* Adjust
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | |RGBRST| RESET| | | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | TOG | HUI | SAI | VAI | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | MOD | HUD | SAD | VAD | | | | | | | | |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "3x7.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06 }, \
+ { L10, L11, L12, L13, L14, L15, L16 }, \
+ { L20, L21, L22, L23, L24, L25, L26 }, \
+ { R06, R05, R04, R03, R02, R01, R00 }, \
+ { R16, R15, R14, R13, R12, R11, R10 }, \
+ { R26, R25, R24, R23, R22, R21, R20 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 70
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,------------------------------------------------. ,------------------------------------------------.
+ * | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter|
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up |
+ * `------------------------------------------------' `------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP
+ ),
+
+ /* Adjust
+ * ,------------------------------------------------. ,------------------------------------------------.
+ * | | |RGBRST| RESET| | | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | TOG | HUI | SAI | VAI | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | MOD | HUD | SAD | VAD | | | | | | | | | |
+ * `------------------------------------------------' `------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "3x8.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
+ L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
+ L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06, L07 }, \
+ { L10, L11, L12, L13, L14, L15, L16, L17 }, \
+ { L20, L21, L22, L23, L24, L25, L26, L27 }, \
+ { R07, R06, R05, R04, R03, R02, R01, R00 }, \
+ { R17, R16, R15, R14, R13, R12, R11, R10 }, \
+ { R27, R26, R25, R24, R23, R22, R21, R20 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 80
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 40, 40 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+ KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT
+ ),
+
+ /* Adjust
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | | | |RGBRST| RESET| | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | | | | |
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "4x6.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { R05, R04, R03, R02, R01, R00 }, \
+ { R15, R14, R13, R12, R11, R10 }, \
+ { R25, R24, R23, R22, R21, R20 }, \
+ { R35, R34, R33, R32, R31, R30 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 70
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | | N | M | , | . | / | \ |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS,
+ KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT
+ ),
+
+ /* Adjust
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | |RGBRST| RESET| | | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | TOG | HUI | SAI | VAI | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | MOD | HUD | SAD | VAD | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | | | | | | | | | | | | |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "4x7.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+ L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06 }, \
+ { L10, L11, L12, L13, L14, L15, L16 }, \
+ { L20, L21, L22, L23, L24, L25, L26 }, \
+ { L30, L31, L32, L33, L34, L35, L36 }, \
+ { R06, R05, R04, R03, R02, R01, R00 }, \
+ { R16, R15, R14, R13, R12, R11, R10 }, \
+ { R26, R25, R24, R23, R22, R21, R20 }, \
+ { R36, R35, R34, R33, R32, R31, R30 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 70
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,------------------------------------------------. ,------------------------------------------------.
+ * | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter|
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down |
+ * `------------------------------------------------' `------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP,
+ KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN
+ ),
+
+ /* Adjust
+ * ,------------------------------------------------. ,------------------------------------------------.
+ * | | |RGBRST| RESET| | | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | TOG | HUI | SAI | VAI | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | MOD | HUD | SAD | VAD | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | | |
+ * `------------------------------------------------' `------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "4x8.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
+ L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
+ L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \
+ L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06, L07 }, \
+ { L10, L11, L12, L13, L14, L15, L16, L17 }, \
+ { L20, L21, L22, L23, L24, L25, L26, L27 }, \
+ { L30, L31, L32, L33, L34, L35, L36, L37 }, \
+ { R07, R06, R05, R04, R03, R02, R01, R00 }, \
+ { R17, R16, R15, R14, R13, R12, R11, R10 }, \
+ { R27, R26, R25, R24, R23, R22, R21, R20 }, \
+ { R37, R36, R35, R34, R33, R32, R31, R30 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 80
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 40, 40 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right|
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+ KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT,
+ KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ /* Adjust
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | | | |RGBRST| RESET| | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | | | | |
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "5x6.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+ L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+ L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+ L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
+ L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05 }, \
+ { L10, L11, L12, L13, L14, L15 }, \
+ { L20, L21, L22, L23, L24, L25 }, \
+ { L30, L31, L32, L33, L34, L35 }, \
+ { L40, L41, L42, L43, L44, L45 }, \
+ { R05, R04, R03, R02, R01, R00 }, \
+ { R15, R14, R13, R12, R11, R10 }, \
+ { R25, R24, R23, R22, R21, R20 }, \
+ { R35, R34, R33, R32, R31, R30 }, \
+ { R45, R44, R43, R42, R41, R40 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 70
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Esc | A | S | D | F | G | | H | J | K | L | ; | " |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Shift| Z | X | C | V | B | | N | M | , | . | / | \ |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
+ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS,
+ KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT
+ ),
+
+ /* Adjust
+ * ,-----------------------------------------. ,-----------------------------------------.
+ * | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | |RGBRST| RESET| | | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | TOG | HUI | SAI | VAI | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | MOD | HUD | SAD | VAD | | | | | | | | |
+ * |------+------+------+------+------+------| |------+------+------+------+------+------|
+ * | | | | | | | | | | | | | |
+ * `-----------------------------------------' `-----------------------------------------'
+ */
+ [_ADJUST] = LAYOUT( \
+ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
+ _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
+ _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "5x7.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
+ L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
+ L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
+ L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
+ L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06 }, \
+ { L10, L11, L12, L13, L14, L15, L16 }, \
+ { L20, L21, L22, L23, L24, L25, L26 }, \
+ { L30, L31, L32, L33, L34, L35, L36 }, \
+ { L40, L41, L42, L43, L44, L45, L46 }, \
+ { R06, R05, R04, R03, R02, R01, R00 }, \
+ { R16, R15, R14, R13, R12, R11, R10 }, \
+ { R26, R25, R24, R23, R22, R21, R20 }, \
+ { R36, R35, R34, R33, R32, R31, R30 }, \
+ { R46, R45, R44, R43, R42, R41, R40 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 70
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,------------------------------------------------. ,------------------------------------------------.
+ * | F1 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F2 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F3 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter|
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F4 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Shift|
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | F5 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down |
+ * `------------------------------------------------' `------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT( \
+ KC_F1, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
+ KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \
+ KC_F3, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
+ KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_RSFT, \
+ KC_F5, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, ADJUST, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \
+ ),
+
+ /* Adjust
+ * ,------------------------------------------------. ,------------------------------------------------.
+ * | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | |RGBRST| RESET| | | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | TOG | HUI | SAI | VAI | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | MOD | HUD | SAD | VAD | | | | | | | | | |
+ * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | | |
+ * `------------------------------------------------' `------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT( \
+ _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
+ _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#include "5x8.h"
--- /dev/null
+#pragma once
+
+#include "runner3680.h"
+
+#include "quantum.h"
+
+#define LAYOUT( \
+ L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
+ L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
+ L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \
+ L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \
+ L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47 \
+ ) \
+ { \
+ { L00, L01, L02, L03, L04, L05, L06, L07 }, \
+ { L10, L11, L12, L13, L14, L15, L16, L17 }, \
+ { L20, L21, L22, L23, L24, L25, L26, L27 }, \
+ { L30, L31, L32, L33, L34, L35, L36, L37 }, \
+ { L40, L41, L42, L43, L44, L45, L46, L47 }, \
+ { R07, R06, R05, R04, R03, R02, R01, R00 }, \
+ { R17, R16, R15, R14, R13, R12, R11, R10 }, \
+ { R27, R26, R25, R24, R23, R22, R21, R20 }, \
+ { R37, R36, R35, R34, R33, R32, R31, R30 }, \
+ { R47, R46, R45, R44, R43, R42, R41, R40 } \
+ }
--- /dev/null
+/* Copyright 2019 omkbd
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0005
+#define MANUFACTURER Omkbd
+#define PRODUCT runner3680
+#define DESCRIPTION A split keyboard
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 10
+#define MATRIX_COLS 8
+
+// wiring of each half
+#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
+#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
+// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
+
+/* define tapping term */
+#define TAPPING_TERM 120
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 80
+#define RGBLIGHT_SPLIT
+#define RGBLED_SPLIT { 40, 40 } // Number of LEDs
+
+#define SOFT_SERIAL_PIN D2
+#define SELECT_SOFT_SERIAL_SPEED 1
+/*Sets the protocol speed when using serial communication*/
+//Speeds:
+//0: about 189kbps (Experimental only)
+//1: about 137kbps (default)
+//2: about 75kbps
+//3: about 39kbps
+//4: about 26kbps
+//5: about 20kbps
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+#include "keymap_jp.h"
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | F1 | F2 | EISU | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | ^ | \ |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | @ | [ | Bksp |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | : | ; | ] | Enter|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F9 | F10 | Ctrl | GUI | Alt | MHEN | Del | Space| | Enter| Bksp | HENK |Adjust| F10 | Left | Down | Right|
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ RGBRST , RGB_TOG, JP_ZHTG, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, JP_YEN,
+ RGB_MOD, RGB_SAI, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_BSPC,
+ RGB_SAI, RGB_SAD, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, JP_RBRC, KC_ENT,
+ RGB_VAI, RGB_VAD, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT,
+ _______, _______, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_HENK, ADJUST, KC_F10, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ /* Adjust
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | |RGBRST| RESET| | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | | | | |
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
+ _______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#pragma once
+
+//#define USE_MATRIX_I2C
+
+/* Select hand configuration */
+
+#define MASTER_LEFT
+// #define MASTER_RIGHT
+// #define EE_HANDS
--- /dev/null
+#include QMK_KEYBOARD_H
+
+extern keymap_config_t keymap_config;
+
+#ifdef RGBLIGHT_ENABLE
+//Following line allows macro to read current RGB settings
+extern rgblight_config_t rgblight_config;
+rgblight_config_t RGB_current_config;
+#endif
+
+enum layer_number {
+ _QWERTY = 0,
+ _ADJUST
+};
+
+enum custom_keycodes {
+ QWERTY = SAFE_RANGE,
+ ADJUST,
+ RGBRST
+};
+
+// Fillers to make layering more clear
+#define EISU LALT(KC_GRV)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* QWERTY
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | F1 | F2 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = | Del |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right|
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_QWERTY] = LAYOUT(
+ KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,
+ KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
+ KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT,
+ KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ /* Adjust
+ * ,-------------------------------------------------------. ,--------------------------------------------------------.
+ * | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | |RGBRST| RESET| | | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
+ * |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
+ * | | | | | | | | | | | | | | | | | |
+ * `-------------------------------------------------------' `-------------------------------------------------------'
+ */
+ [_ADJUST] = LAYOUT(
+ _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
+ _______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QWERTY:
+ if (record->event.pressed) {
+ print("mode just switched to qwerty and this is a huge string\n");
+ set_single_persistent_default_layer(_QWERTY);
+ }
+ break;
+
+ case ADJUST:
+ if (record->event.pressed) {
+ layer_on(_ADJUST);
+ } else {
+ layer_off(_ADJUST);
+ }
+ break;
+
+ case RGBRST:
+ #ifdef RGBLIGHT_ENABLE
+ if (record->event.pressed) {
+ eeconfig_update_rgblight_default();
+ rgblight_enable();
+ RGB_current_config = rgblight_config;
+ }
+ #endif
+ break;
+ }
+ return true;
+}
--- /dev/null
+RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
--- /dev/null
+#pragma once
+
+#include "config_common.h"
--- /dev/null
+# runner3680
+
+
+
+A split ortholinear keyboard. Each half is a 5x8 arrangement, with breakable pieces to allow the number of rows to be customized between 3 to 5, and the number of columns to be between 6 to 8.
+
+Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)
+Hardware Supported: Runner3680, Pro Micro ATmega32u4
+Hardware Availability: Order your own [yourself](https://github.com/omkbd/Runner3680)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make runner3680/5x8:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = caterina
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
+
+SPLIT_KEYBOARD = yes # Enables split keyboard support
+
+DEFAULT_FOLDER = runner3680/5x8
--- /dev/null
+#include "runner3680.h"
--- /dev/null
+#pragma once
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_runner3680_5x8
+ #include "5x8.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_5x7
+ #include "5x7.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_5x6
+ #include "5x6.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_4x8
+ #include "4x8.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_4x7
+ #include "4x7.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_4x6
+ #include "4x6.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_3x8
+ #include "3x8.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_3x7
+ #include "3x7.h"
+#endif
+
+#ifdef KEYBOARD_runner3680_3x6
+ #include "3x6.h"
+#endif
projects / qmk_firmware.git / commitdiff