-Doro67 Multi PCB
-===
+# Doro67 Multi PCB
-A custom 65% keyboard with multiple layout support.
-
-Do not flash RGB firmware for this board.
+65% custom keyboard made by 80ultraman/Alf/Backprop Studios with multiple layout support. Despite the layout options available, layout is dictated by the selected integrated plate.
Keyboard Maintainer: [ShadeDream](https://github.com/shadedream)
Hardware Supported: Doro67 Multi PCB
+# Doro67
+
+The Doro67 is a 65% USB C, integrated plate keyboard with blocker based on the M65-a by Keyclack/Rama.
+
+The [Group Buy](https://geekhack.org/index.php?topic=97265.0) was run by 80ultraman in coordination with Alf for machining and Backprop Studios for PCB design.
+
+There were 3 different PCBs available for this group buy.
+## **Please be aware of which PCB you own and flash the correct firmware on it.**
+
+**Regular:** PCB made for the China GB which only had 1 layout.
+**Multi:** PCB made for the international GB comprising of multiple layouts. While several layouts were possible, layout was determined by the integrated plate layout chosen by the customer.
+**RGB:** PCB made for the international GB which had an identical switch matrix and layout to the regular PCB, with the addition of per key RGB LEDs.
\ No newline at end of file
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0001
-#define MANUFACTURER 80ultraman
-#define PRODUCT doro67
+#define MANUFACTURER Backprop Studio
+#define PRODUCT Doro67 Regular PCB
#define DESCRIPTION 65% custom keyboard
/* key matrix size */
-# Regular PCB for the Doro67
+# Doro67 Regular PCB
-Regular PCB for the Doro67 having ONLY one layout. This is not the PCB with RGB support.
+65% custom keyboard made by 80ultraman/Alf/Backprop Studios available during the China Group Buy.
-Do not flash RGB firmware for this board.
+This is not the PCB with RGB support. Do not flash RGB firmware for this board.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: Doro67 Regular PCB
--- /dev/null
+/*
+Copyright 2019 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Backprop Studio
+#define PRODUCT Doro67 RGB PCB
+#define DESCRIPTION 65% custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { B0, B1, B2, B3, D4, D6, D7, B4, B5, B6, C6, C7, F5, F6, F7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// The pin connected to the data pin of the LEDs
+#define RGB_DI_PIN B7
+// The number of LEDs connected
+#define DRIVER_LED_TOTAL 67
+
+#define RGB_MATRIX_KEYPRESSES
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define RGBLED_NUM 67
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
--- /dev/null
+{
+ "keyboard_name": "Doro 67 RGB",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 16,
+ "height": 5,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 67,
+ "layout": [
+ {"label":"K00", "x":0, "y":0},
+ {"label":"K01", "x":1, "y":0},
+ {"label":"K02", "x":2, "y":0},
+ {"label":"K03", "x":3, "y":0},
+ {"label":"K04", "x":4, "y":0},
+ {"label":"K05", "x":5, "y":0},
+ {"label":"K06", "x":6, "y":0},
+ {"label":"K07", "x":7, "y":0},
+ {"label":"K08", "x":8, "y":0},
+ {"label":"K09", "x":9, "y":0},
+ {"label":"K0A", "x":10, "y":0},
+ {"label":"K0B", "x":11, "y":0},
+ {"label":"K0C", "x":12, "y":0},
+ {"label":"K0D", "x":13, "y":0, "w":2},
+ {"label":"K0E", "x":15, "y":0},
+ {"label":"K10", "x":0, "y":1, "w":1.5},
+ {"label":"K11", "x":1.5, "y":1},
+ {"label":"K12", "x":2.5, "y":1},
+ {"label":"K13", "x":3.5, "y":1},
+ {"label":"K14", "x":4.5, "y":1},
+ {"label":"K15", "x":5.5, "y":1},
+ {"label":"K16", "x":6.5, "y":1},
+ {"label":"K17", "x":7.5, "y":1},
+ {"label":"K18", "x":8.5, "y":1},
+ {"label":"K19", "x":9.5, "y":1},
+ {"label":"K1A", "x":10.5, "y":1},
+ {"label":"K1B", "x":11.5, "y":1},
+ {"label":"K1C", "x":12.5, "y":1},
+ {"label":"K1D", "x":13.5, "y":1, "w":1.5},
+ {"label":"K1E", "x":15, "y":1},
+ {"label":"K20", "x":0, "y":2, "w":1.75},
+ {"label":"K21", "x":1.75, "y":2},
+ {"label":"K22", "x":2.75, "y":2},
+ {"label":"K23", "x":3.75, "y":2},
+ {"label":"K24", "x":4.75, "y":2},
+ {"label":"K25", "x":5.75, "y":2},
+ {"label":"K26", "x":6.75, "y":2},
+ {"label":"K27", "x":7.75, "y":2},
+ {"label":"K28", "x":8.75, "y":2},
+ {"label":"K29", "x":9.75, "y":2},
+ {"label":"K2A", "x":10.75, "y":2},
+ {"label":"K2B", "x":11.75, "y":2},
+ {"label":"K2D", "x":12.75, "y":2, "w":2.25},
+ {"label":"K2E", "x":15, "y":2},
+ {"label":"K30", "x":0, "y":3, "w":2.25},
+ {"label":"K32", "x":2.25, "y":3},
+ {"label":"K33", "x":3.25, "y":3},
+ {"label":"K34", "x":4.25, "y":3},
+ {"label":"K35", "x":5.25, "y":3},
+ {"label":"K36", "x":6.25, "y":3},
+ {"label":"K37", "x":7.25, "y":3},
+ {"label":"K38", "x":8.25, "y":3},
+ {"label":"K39", "x":9.25, "y":3},
+ {"label":"K3A", "x":10.25, "y":3},
+ {"label":"K3B", "x":11.25, "y":3},
+ {"label":"K3C", "x":12.25, "y":3, "w":1.75},
+ {"label":"K3D", "x":14, "y":3},
+ {"label":"K3E", "x":15, "y":3},
+ {"label":"K40", "x":0, "y":4, "w":1.25},
+ {"label":"K41", "x":1.25, "y":4, "w":1.25},
+ {"label":"K42", "x":2.5, "y":4, "w":1.25},
+ {"label":"K43", "x":3.75, "y":4, "w":6.25},
+ {"label":"K49", "x":10, "y":4, "w":1.25},
+ {"label":"K4A", "x":11.25, "y":4, "w":1.25},
+ {"label":"K4C", "x":13, "y":4},
+ {"label":"K4D", "x":14, "y":4},
+ {"label":"K4E", "x":15, "y":4}
+ ]
+ }
+ }
+ }
+
\ No newline at end of file
--- /dev/null
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+ QMKBEST = SAFE_RANGE,
+ QMKURL
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT( \
+ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, \
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \
+ ),
+
+ [1] = LAYOUT( \
+ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, \
+ QMKBEST, QMKURL, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
+ ),
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch (keycode) {
+ case QMKBEST:
+ if (record->event.pressed) {
+ // when keycode QMKBEST is pressed
+ SEND_STRING("QMK is the best thing ever!");
+ } else {
+ // when keycode QMKBEST is released
+ }
+ break;
+ case QMKURL:
+ if (record->event.pressed) {
+ // when keycode QMKURL is pressed
+ SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+ } else {
+ // when keycode QMKURL is released
+ }
+ break;
+ }
+ return true;
+}
--- /dev/null
+# The default keymap for rgb
--- /dev/null
+# Doro67 RGB PCB
+
+65% custom keyboard made by 80ultraman/Alf/Backprop Studios with in switch RGB featuring the same switch matrix and layout as the regular PCB.
+
+Flashing the regular PCB firmware on this board will work, but will disable RGB lighting.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
+Hardware Supported: Doro 67 RGB PCB
+Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=97265.0)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make doro67/rgb:default
+
+**RGB Note:** The WS2812 string of LEDs starts from the `K00` key connected to pin `B7` and is connected from left to right, top to bottom, following the physical layout of the board.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "rgb.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ setPinOutput(E6);
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ writePinLow(E6);
+ } else {
+ writePinHigh(E6);
+ }
+ led_set_user(usb_led);
+}
+
+const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
+ {{0|(0<<4)}, {15*0, 0}, 0}, // Esc
+ {{0|(1<<4)}, {15*1, 0}, 0}, // 1
+ {{0|(2<<4)}, {15*2, 0}, 0}, // 2
+ {{0|(3<<4)}, {15*3, 0}, 0}, // 3
+ {{0|(4<<4)}, {15*4, 0}, 0}, // 4
+ {{0|(5<<4)}, {15*5, 0}, 0}, // 5
+ {{0|(6<<4)}, {15*6, 0}, 0}, // 6
+ {{0|(7<<4)}, {15*7, 0}, 0}, // 7
+ {{0|(8<<4)}, {15*8, 0}, 0}, // 8
+ {{0|(9<<4)}, {15*9, 0}, 0}, // 9
+ {{0|(10<<4)}, {15*10, 0}, 0}, // 0
+ {{0|(11<<4)}, {15*11, 0}, 0}, // -
+ {{0|(12<<4)}, {15*12, 0}, 0}, // =
+ {{0|(13<<4)}, {15*13.5, 0}, 1}, // Backspace
+ {{0|(14<<4)}, {15*15, 0}, 1}, // Ins
+
+ {{1|(0<<4)}, {15*0.5, 16}, 1}, // Tab
+ {{1|(1<<4)}, {15*1.5, 16}, 0}, // Q
+ {{1|(2<<4)}, {15*2.5, 16}, 0}, // W
+ {{1|(3<<4)}, {15*3.5, 16}, 0}, // E
+ {{1|(4<<4)}, {15*4.5, 16}, 0}, // R
+ {{1|(5<<4)}, {15*5.5, 16}, 0}, // T
+ {{1|(6<<4)}, {15*6.5, 16}, 0}, // Y
+ {{1|(7<<4)}, {15*7.5, 16}, 0}, // U
+ {{1|(8<<4)}, {15*8.5, 16}, 0}, // I
+ {{1|(9<<4)}, {15*9.5, 16}, 0}, // O
+ {{1|(10<<4)}, {15*10.5, 16}, 0}, // P
+ {{1|(11<<4)}, {15*11.5, 16}, 0}, // [
+ {{1|(12<<4)}, {15*12.5, 16}, 0}, // ]
+ {{1|(13<<4)}, {15*13.75, 16}, 1}, //
+ {{1|(14<<4)}, {15*15, 16}, 1}, // Del
+
+ {{2|(0<<4)}, {15*0.75, 32}, 1}, // Capslock
+ {{2|(1<<4)}, {15*1.75, 32}, 0}, // A
+ {{2|(2<<4)}, {15*2.75, 32}, 0}, // S
+ {{2|(3<<4)}, {15*3.75, 32}, 0}, // D
+ {{2|(4<<4)}, {15*4.75, 32}, 0}, // F
+ {{2|(5<<4)}, {15*5.75, 32}, 0}, // G
+ {{2|(6<<4)}, {15*6.75, 32}, 0}, // H
+ {{2|(7<<4)}, {15*7.75, 32}, 0}, // J
+ {{2|(8<<4)}, {15*8.75, 32}, 0}, // K
+ {{2|(9<<4)}, {15*9.75, 32}, 0}, // L
+ {{2|(10<<4)}, {15*10.75, 32}, 0}, // ;
+ {{2|(11<<4)}, {15*11.75, 32}, 0}, // '
+ {{2|(13<<4)}, {15*13.25, 32}, 1}, // Enter
+ {{2|(14<<4)}, {15*15, 32}, 1}, // Pgup
+
+ {{3|(0<<4)}, {15*1.25, 48}, 1}, // LShift
+ {{3|(2<<4)}, {15*2, 48}, 0}, // Z
+ {{3|(3<<4)}, {15*3, 48}, 0}, // X
+ {{3|(4<<4)}, {15*4, 48}, 0}, // C
+ {{3|(5<<4)}, {15*5, 48}, 0}, // V
+ {{3|(6<<4)}, {15*6, 48}, 0}, // B
+ {{3|(7<<4)}, {15*7, 48}, 0}, // N
+ {{3|(8<<4)}, {15*8, 48}, 0}, // M
+ {{3|(9<<4)}, {15*9, 48}, 0}, // ,
+ {{3|(10<<4)}, {15*10, 48}, 0}, // .
+ {{3|(11<<4)}, {15*11, 48}, 0}, // /
+ {{3|(12<<4)}, {15*12.75, 48}, 1}, // Shift
+ {{3|(13<<4)}, {15*14, 48}, 1}, // Up
+ {{3|(14<<4)}, {15*15, 48}, 1}, // Pgdn
+
+ {{4|(0<<4)}, {15*0.25, 64}, 1}, // Ctrl
+ {{4|(1<<4)}, {15*1.5, 64}, 1}, // GUI
+ {{4|(2<<4)}, {15*2.25, 64}, 1}, // Alt
+ {{4|(3<<4)}, {15*6.75, 64}, 0}, // Space
+ {{4|(9<<4)}, {15*9, 64}, 1}, // RAlt
+ {{4|(10<<4)}, {15*10.25, 64}, 1}, // FN
+ {{4|(12<<4)}, {15*13, 64}, 1}, // Left
+ {{4|(13<<4)}, {15*14, 64}, 1}, // Down
+ {{4|(14<<4)}, {15*15, 64}, 1}, // Right
+};
--- /dev/null
+/* Copyright 2019 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
+ k40, k41, k42, k43, k49, k4A, k4C, k4D, k4E \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \
+ { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
+ { k40, k41, k42, k43, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4A, KC_NO, k4C, k4D, k4E }, \
+}
--- /dev/null
+# MCU name
+#MCU = at90usb1286
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+RGB_MATRIX_ENABLE = WS2812
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
projects / qmk_firmware.git / commitdiff