--- /dev/null
+/*
+Copyright 2018 MechMerlin
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Donut Cables
+#define PRODUCT ScrabblePad
+#define DESCRIPTION 15x15 Ortholinear Board
+
+/* key matrix size */
+#define MATRIX_ROWS 15
+#define MATRIX_COLS 15
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D5, F1, C7, F2, C6, F3, C5, F4, C4, F5, C3, F6, C2, F7, C1 }
+#define MATRIX_COL_PINS { D6, D7, E0, E1, B7, D2, D3, D4, C0, B4, B5, B6, F0, E6, E7 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+// #define BACKLIGHT_PIN
+// #define BACKLIGHT_BREATHING
+// #define BACKLIGHT_LEVELS 3
+
+// ws2812 options
+//#define RGB_DI_PIN A0 // pin the DI on the ws2812 is hooked-up to
+//#define RGBLIGHT_ANIMATIONS // run RGB animations
+//#define RGBLED_NUM 6 // number of LEDs
+//#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
+//#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
+//#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP1 H
+//#define MAGIC_KEY_HELP2 SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0_ALT1 ESC
+//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER PAUSE
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
--- /dev/null
+{
+ "keyboard_name": "scrabblepad",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 15,
+ "height": 15,
+ "layouts": {
+ "LAYOUT": {
+ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}, {"x":4, "y":5}, {"x":5, "y":5}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":8, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":0, "y":6}, {"x":1, "y":6}, {"x":2, "y":6}, {"x":3, "y":6}, {"x":4, "y":6}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":8, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":12, "y":6}, {"x":13, "y":6}, {"x":14, "y":6}, {"x":0, "y":7}, {"x":1, "y":7}, {"x":2, "y":7}, {"x":3, "y":7}, {"x":4, "y":7}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":8, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}, {"x":12, "y":7}, {"x":13, "y":7}, {"x":14, "y":7}, {"x":0, "y":8}, {"x":1, "y":8}, {"x":2, "y":8}, {"x":3, "y":8}, {"x":4, "y":8}, {"x":5, "y":8}, {"x":6, "y":8}, {"x":7, "y":8}, {"x":8, "y":8}, {"x":9, "y":8}, {"x":10, "y":8}, {"x":11, "y":8}, {"x":12, "y":8}, {"x":13, "y":8}, {"x":14, "y":8}, {"x":0, "y":9}, {"x":1, "y":9}, {"x":2, "y":9}, {"x":3, "y":9}, {"x":4, "y":9}, {"x":5, "y":9}, {"x":6, "y":9}, {"x":7, "y":9}, {"x":8, "y":9}, {"x":9, "y":9}, {"x":10, "y":9}, {"x":11, "y":9}, {"x":12, "y":9}, {"x":13, "y":9}, {"x":14, "y":9}, {"x":0, "y":10}, {"x":1, "y":10}, {"x":2, "y":10}, {"x":3, "y":10}, {"x":4, "y":10}, {"x":5, "y":10}, {"x":6, "y":10}, {"x":7, "y":10}, {"x":8, "y":10}, {"x":9, "y":10}, {"x":10, "y":10}, {"x":11, "y":10}, {"x":12, "y":10}, {"x":13, "y":10}, {"x":14, "y":10}, {"x":0, "y":11}, {"x":1, "y":11}, {"x":2, "y":11}, {"x":3, "y":11}, {"x":4, "y":11}, {"x":5, "y":11}, {"x":6, "y":11}, {"x":7, "y":11}, {"x":8, "y":11}, {"x":9, "y":11}, {"x":10, "y":11}, {"x":11, "y":11}, {"x":12, "y":11}, {"x":13, "y":11}, {"x":14, "y":11}, {"x":0, "y":12}, {"x":1, "y":12}, {"x":2, "y":12}, {"x":3, "y":12}, {"x":4, "y":12}, {"x":5, "y":12}, {"x":6, "y":12}, {"x":7, "y":12}, {"x":8, "y":12}, {"x":9, "y":12}, {"x":10, "y":12}, {"x":11, "y":12}, {"x":12, "y":12}, {"x":13, "y":12}, {"x":14, "y":12}, {"x":0, "y":13}, {"x":1, "y":13}, {"x":2, "y":13}, {"x":3, "y":13}, {"x":4, "y":13}, {"x":5, "y":13}, {"x":6, "y":13}, {"x":7, "y":13}, {"x":8, "y":13}, {"x":9, "y":13}, {"x":10, "y":13}, {"x":11, "y":13}, {"x":12, "y":13}, {"x":13, "y":13}, {"x":14, "y":13}, {"x":0, "y":14}, {"x":1, "y":14}, {"x":2, "y":14}, {"x":3, "y":14}, {"x":4, "y":14}, {"x":5, "y":14}, {"x":6, "y":14}, {"x":7, "y":14}, {"x":8, "y":14}, {"x":9, "y":14}, {"x":10, "y":14}, {"x":11, "y":14}, {"x":12, "y":14}, {"x":13, "y":14}, {"x":14, "y":14}]
+ }
+ }
+}
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+// place overrides here
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
+ KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC \
+),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) {
+ register_code(KC_RSFT);
+ } else {
+ unregister_code(KC_RSFT);
+ }
+ break;
+ }
+ return MACRO_NONE;
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# The default keymap for ScrabblePad
+
+This is the default keymap for the ScrabblePad.
+
+On each row, each key is used to spell out each character in
+the following string: "donutcat rules ".
--- /dev/null
+#include "scrabblepad.h"
+#include <stdlib.h>
+
+static uint16_t keystroke;
+static bool shift_pressed;
+
+static int lower = (int) KC_A;
+static int upper = (int) KC_Z;
+
+uint16_t random_keycode(void) {
+ return lower + (rand() % (upper - lower + 1));
+};
+
+enum custom_keycodes {
+ RND_KEY = SAFE_RANGE
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ switch(keycode) {
+ case RND_KEY:
+ if (record->event.pressed) {
+ keystroke = random_keycode();
+ if (rand() % 2 > 0) {
+ shift_pressed = 1;
+ register_code(KC_LSHIFT);
+ }
+ register_code(keystroke);
+ } else {
+ if (shift_pressed > 0) {
+ unregister_code(KC_LSHIFT);
+ }
+ unregister_code(keystroke);
+ }
+
+ return false;
+
+ default:
+ return true;
+ }
+
+ return true;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+[0] = LAYOUT( /* Base */
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RESET, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
+ RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY
+),
+};
+
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
--- /dev/null
+# Scrabblepad keymap with every key press random
+
+Every key produces a random key press, except the middle key, which is reserved for resetting the board.
+
+The random key press is selected between KC_A and KC_Z keycodes.
--- /dev/null
+# ScrabblePad
+
+The ScrabblePad is a 15x15 ortholinear keyboard designed for use with
+the XDA Scrabble Board sold by [Novelkeys](https://novelkeys.xyz).
+
+It uses a [Teensy++ 2.0](https://www.pjrc.com/store/teensypp.html)
+featuring an at90usb1286 8 bit microcontroller. Usage requires modifying the Teensy by removing the LED on pin D6.
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Donut Cables](https://donutcables.com/)
+Hardware Supported: Teensy++ 2.0 and ScrabblePad PCB
+Hardware Availability: [Donut Cables](https://donutcables.com/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make donutcables/scrabblepad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- /dev/null
+# MCU name
+MCU = at90usb1286
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "scrabblepad.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
--- /dev/null
+/* Copyright 2018 MechMerlin
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+// Written in the format K(row)(column) where numbering is in hexadecimal
+#define LAYOUT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
+ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \
+ k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, \
+ k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E, \
+ k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7A, k7B, k7C, k7D, k7E, \
+ k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, \
+ k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, \
+ kA0, kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, \
+ kB0, kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, \
+ kC0, kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kCA, kCB, kCC, kCD, kCE, \
+ kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, \
+ kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE \
+) \
+{ \
+ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, }, \
+ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, }, \
+ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, }, \
+ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, }, \
+ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, }, \
+ { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, }, \
+ { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E, }, \
+ { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7A, k7B, k7C, k7D, k7E, }, \
+ { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, }, \
+ { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, }, \
+ { kA0, kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, }, \
+ { kB0, kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, }, \
+ { kC0, kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kCA, kCB, kCC, kCD, kCE, }, \
+ { kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, }, \
+ { kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE } \
+}
+++ /dev/null
-/*
-Copyright 2018 MechMerlin
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x0000
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Donut Cables
-#define PRODUCT ScrabblePad
-#define DESCRIPTION 15x15 Ortholinear Board
-
-/* key matrix size */
-#define MATRIX_ROWS 15
-#define MATRIX_COLS 15
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { D5, F1, C7, F2, C6, F3, C5, F4, C4, F5, C3, F6, C2, F7, C1 }
-#define MATRIX_COL_PINS { D6, D7, E0, E1, B7, D2, D3, D4, C0, B4, B5, B6, F0, E6, E7 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
-// ws2812 options
-//#define RGB_DI_PIN A0 // pin the DI on the ws2812 is hooked-up to
-//#define RGBLIGHT_ANIMATIONS // run RGB animations
-//#define RGBLED_NUM 6 // number of LEDs
-//#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
-//#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
-//#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCING_DELAY 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/*
- * MIDI options
- */
-
-/* Prevent use of disabled MIDI features in the keymap */
-//#define MIDI_ENABLE_STRICT 1
-
-/* enable basic MIDI features:
- - MIDI notes can be sent when in Music mode is on
-*/
-//#define MIDI_BASIC
-
-/* enable advanced MIDI features:
- - MIDI notes can be added to the keymap
- - Octave shift and transpose
- - Virtual sustain, portamento, and modulation wheel
- - etc.
-*/
-//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 1
-
-#endif
+++ /dev/null
-{
- "keyboard_name": "scrabblepad",
- "url": "",
- "maintainer": "qmk",
- "width": 15,
- "height": 15,
- "layouts": {
- "LAYOUT": {
- "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":0, "y":5}, {"x":1, "y":5}, {"x":2, "y":5}, {"x":3, "y":5}, {"x":4, "y":5}, {"x":5, "y":5}, {"x":6, "y":5}, {"x":7, "y":5}, {"x":8, "y":5}, {"x":9, "y":5}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":0, "y":6}, {"x":1, "y":6}, {"x":2, "y":6}, {"x":3, "y":6}, {"x":4, "y":6}, {"x":5, "y":6}, {"x":6, "y":6}, {"x":7, "y":6}, {"x":8, "y":6}, {"x":9, "y":6}, {"x":10, "y":6}, {"x":11, "y":6}, {"x":12, "y":6}, {"x":13, "y":6}, {"x":14, "y":6}, {"x":0, "y":7}, {"x":1, "y":7}, {"x":2, "y":7}, {"x":3, "y":7}, {"x":4, "y":7}, {"x":5, "y":7}, {"x":6, "y":7}, {"x":7, "y":7}, {"x":8, "y":7}, {"x":9, "y":7}, {"x":10, "y":7}, {"x":11, "y":7}, {"x":12, "y":7}, {"x":13, "y":7}, {"x":14, "y":7}, {"x":0, "y":8}, {"x":1, "y":8}, {"x":2, "y":8}, {"x":3, "y":8}, {"x":4, "y":8}, {"x":5, "y":8}, {"x":6, "y":8}, {"x":7, "y":8}, {"x":8, "y":8}, {"x":9, "y":8}, {"x":10, "y":8}, {"x":11, "y":8}, {"x":12, "y":8}, {"x":13, "y":8}, {"x":14, "y":8}, {"x":0, "y":9}, {"x":1, "y":9}, {"x":2, "y":9}, {"x":3, "y":9}, {"x":4, "y":9}, {"x":5, "y":9}, {"x":6, "y":9}, {"x":7, "y":9}, {"x":8, "y":9}, {"x":9, "y":9}, {"x":10, "y":9}, {"x":11, "y":9}, {"x":12, "y":9}, {"x":13, "y":9}, {"x":14, "y":9}, {"x":0, "y":10}, {"x":1, "y":10}, {"x":2, "y":10}, {"x":3, "y":10}, {"x":4, "y":10}, {"x":5, "y":10}, {"x":6, "y":10}, {"x":7, "y":10}, {"x":8, "y":10}, {"x":9, "y":10}, {"x":10, "y":10}, {"x":11, "y":10}, {"x":12, "y":10}, {"x":13, "y":10}, {"x":14, "y":10}, {"x":0, "y":11}, {"x":1, "y":11}, {"x":2, "y":11}, {"x":3, "y":11}, {"x":4, "y":11}, {"x":5, "y":11}, {"x":6, "y":11}, {"x":7, "y":11}, {"x":8, "y":11}, {"x":9, "y":11}, {"x":10, "y":11}, {"x":11, "y":11}, {"x":12, "y":11}, {"x":13, "y":11}, {"x":14, "y":11}, {"x":0, "y":12}, {"x":1, "y":12}, {"x":2, "y":12}, {"x":3, "y":12}, {"x":4, "y":12}, {"x":5, "y":12}, {"x":6, "y":12}, {"x":7, "y":12}, {"x":8, "y":12}, {"x":9, "y":12}, {"x":10, "y":12}, {"x":11, "y":12}, {"x":12, "y":12}, {"x":13, "y":12}, {"x":14, "y":12}, {"x":0, "y":13}, {"x":1, "y":13}, {"x":2, "y":13}, {"x":3, "y":13}, {"x":4, "y":13}, {"x":5, "y":13}, {"x":6, "y":13}, {"x":7, "y":13}, {"x":8, "y":13}, {"x":9, "y":13}, {"x":10, "y":13}, {"x":11, "y":13}, {"x":12, "y":13}, {"x":13, "y":13}, {"x":14, "y":13}, {"x":0, "y":14}, {"x":1, "y":14}, {"x":2, "y":14}, {"x":3, "y":14}, {"x":4, "y":14}, {"x":5, "y":14}, {"x":6, "y":14}, {"x":7, "y":14}, {"x":8, "y":14}, {"x":9, "y":14}, {"x":10, "y":14}, {"x":11, "y":14}, {"x":12, "y":14}, {"x":13, "y":14}, {"x":14, "y":14}]
- }
- }
-}
+++ /dev/null
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-// place overrides here
+++ /dev/null
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include QMK_KEYBOARD_H
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT( /* Base */
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC, \
- KC_D, KC_O, KC_N, KC_U, KC_T, KC_C, KC_A, KC_T, KC_SPC, KC_R, KC_U, KC_L, KC_E, KC_S, KC_SPC \
-),
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
+++ /dev/null
-# The default keymap for ScrabblePad
-
-This is the default keymap for the ScrabblePad.
-
-On each row, each key is used to spell out each character in
-the following string: "donutcat rules ".
+++ /dev/null
-#include "scrabblepad.h"
-#include <stdlib.h>
-
-static uint16_t keystroke;
-static bool shift_pressed;
-
-static int lower = (int) KC_A;
-static int upper = (int) KC_Z;
-
-uint16_t random_keycode(void) {
- return lower + (rand() % (upper - lower + 1));
-};
-
-enum custom_keycodes {
- RND_KEY = SAFE_RANGE
-};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch(keycode) {
- case RND_KEY:
- if (record->event.pressed) {
- keystroke = random_keycode();
- if (rand() % 2 > 0) {
- shift_pressed = 1;
- register_code(KC_LSHIFT);
- }
- register_code(keystroke);
- } else {
- if (shift_pressed > 0) {
- unregister_code(KC_LSHIFT);
- }
- unregister_code(keystroke);
- }
-
- return false;
-
- default:
- return true;
- }
-
- return true;
-}
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT( /* Base */
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RESET, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, \
- RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY, RND_KEY
-),
-};
-
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
+++ /dev/null
-# Scrabblepad keymap with every key press random
-
-Every key produces a random key press, except the middle key, which is reserved for resetting the board.
-
-The random key press is selected between KC_A and KC_Z keycodes.
+++ /dev/null
-# ScrabblePad
-
-The ScrabblePad is a 15x15 ortholinear keyboard designed for use with
-the XDA Scrabble Board sold by [Novelkeys](https://novelkeys.xyz).
-
-It uses a [Teensy++ 2.0](https://www.pjrc.com/store/teensypp.html)
-featuring an at90usb1286 8 bit microcontroller. Usage requires modifying the Teensy by removing the LED on pin D6.
-
-Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [Donut Cables](https://donutcables.com/)
-Hardware Supported: Teensy++ 2.0 and ScrabblePad PCB
-Hardware Availability: [Donut Cables](https://donutcables.com/)
-
-Make example for this keyboard (after setting up your build environment):
-
- make scrabblepad:default
-
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+++ /dev/null
-# MCU name
-MCU = at90usb1286
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = yes # Console for debug(+400)
-COMMAND_ENABLE = yes # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = no # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+++ /dev/null
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include "scrabblepad.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- led_set_user(usb_led);
-}
+++ /dev/null
-/* Copyright 2018 MechMerlin
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef SCRABBLEPAD_H
-#define SCRABBLEPAD_H
-
-#include "quantum.h"
-
-// Written in the format K(row)(column) where numbering is in hexadecimal
-#define LAYOUT( \
- k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
- k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
- k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
- k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
- k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, \
- k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, \
- k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E, \
- k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7A, k7B, k7C, k7D, k7E, \
- k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, \
- k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, \
- kA0, kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, \
- kB0, kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, \
- kC0, kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kCA, kCB, kCC, kCD, kCE, \
- kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, \
- kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE \
-) \
-{ \
- { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, }, \
- { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, }, \
- { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, }, \
- { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, }, \
- { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, }, \
- { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, }, \
- { k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E, }, \
- { k70, k71, k72, k73, k74, k75, k76, k77, k78, k79, k7A, k7B, k7C, k7D, k7E, }, \
- { k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, }, \
- { k90, k91, k92, k93, k94, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, }, \
- { kA0, kA1, kA2, kA3, kA4, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, }, \
- { kB0, kB1, kB2, kB3, kB4, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, }, \
- { kC0, kC1, kC2, kC3, kC4, kC5, kC6, kC7, kC8, kC9, kCA, kCB, kCC, kCD, kCE, }, \
- { kD0, kD1, kD2, kD3, kD4, kD5, kD6, kD7, kD8, kD9, kDA, kDB, kDC, kDD, kDE, }, \
- { kE0, kE1, kE2, kE3, kE4, kE5, kE6, kE7, kE8, kE9, kEA, kEB, kEC, kED, kEE } \
-}
-
-#endif
projects / qmk_firmware.git / commitdiff